Age | Commit message (Collapse) | Author |
|
Pull in upstream changes so further patches don't conflict.
|
|
Global timers could be expired remotely when the target CPU is idle. After
a remote timer expiry, the remote timer_base->next_expiry value is updated
while holding the timer_base->lock. When the formerly idle CPU becomes
active at the same time and checks whether timers need to expire, this
check is done lockless as it is on the local CPU. This could lead to a data
race, which was reported by sysbot:
https://lore.kernel.org/r/000000000000916e55061f969e14@google.com
When the value is read lockless but changed by the remote CPU, only two non
critical scenarios could happen:
1) The already update value is read -> everything is perfect
2) The old value is read -> a superfluous timer soft interrupt is raised
The same situation could happen when enqueueing a new first pinned timer by
a remote CPU also with non critical scenarios:
1) The already update value is read -> everything is perfect
2) The old value is read -> when the CPU is idle, an IPI is executed
nevertheless and when the CPU isn't idle, the updated value will be visible
on the next tick and the timer might be late one jiffie.
As this is very unlikely to happen, the overhead of doing the check under
the lock is a way more effort, than a superfluous timer soft interrupt or a
possible 1 jiffie delay of the timer.
Document and annotate this non critical behavior in the code by using
READ/WRITE_ONCE() pair when accessing timer_base->next_expiry.
Reported-by: syzbot+bf285fcc0a048e028118@syzkaller.appspotmail.com
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20240829154305.19259-1-anna-maria@linutronix.de
Closes: https://lore.kernel.org/lkml/000000000000916e55061f969e14@google.com
|
|
sizeof(unsigned long) * 8 is the number of bits in an unsigned long
variable, replace it with BITS_PER_LONG macro to make it simpler.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240903035358.308482-1-ruanjinjie@huawei.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.12
- pm33xx/knav_qmss_queue/pruss: Cleanups around device_node scope based cleanups
- knav: Additional fixes around of property
- k3-ringacc: Optimizations for data structure
* tag 'ti-driver-soc-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: pm33xx: do device_node auto cleanup
soc: ti: knav_qmss_queue: do device_node auto cleanup
soc: ti: pruss: do device_node auto cleanup
soc: ti: pruss: factor out memories setup
soc: ti: knav: Use of_property_read_variable_u32_array()
soc: ti: knav: Drop unnecessary check for property presence
soc: ti: k3-ringacc: Constify struct k3_ring_ops
Link: https://lore.kernel.org/r/20240903155632.525twuumykwnfkiz@subtitle
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The manual says that bit 6 is IGN for all Page-Table Base Address
pointers, don't set it.
Fixes: aaac38f61487 ("iommu/amd: Initial support for AMD IOMMU v2 page table")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The HW only has 52 bits of physical address support, the supported page
sizes should not have bits set beyond this. Further the spec says that the
6th level does not support any "default page size for translation entries"
meaning leafs in the 6th level are not allowed too.
Rework the definition to use GENMASK to build the range of supported pages
from the top of physical to 4k.
Nothing ever uses such large pages, so this is a cosmetic/documentation
improvement only.
Reported-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/13-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The iommu driver is supposed to provide these ops to its io_pgtable
implementation so that it can hook the invalidations and do the right
thing.
They are called by wrapper functions like io_pgtable_tlb_add_page() etc,
which the AMD code never calls.
Instead it directly calls the AMD IOMMU invalidation functions by casting
to the struct protection_domain. Remove it all.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/12-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Generates the same code, but is not the expected C style.
Fixes: aaac38f61487 ("iommu/amd: Initial support for AMD IOMMU v2 page table")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/11-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Don't use tlb as some flag to indicate if protection_domain_alloc()
completed. Have protection_domain_alloc() unwind itself in the normal
kernel style and require protection_domain_free() only be called on
successful results of protection_domain_alloc().
Also, the amd_iommu_domain_free() op is never called by the core code with
a NULL argument, so remove all the NULL tests as well.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/10-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The AMD io_pgtable stuff doesn't implement the tlb ops callbacks, instead
it invokes the invalidation ops directly on the struct protection_domain.
Narrow the use of struct protection_domain to only those few code paths.
Make everything else properly use struct amd_io_pgtable through the call
chains, which is the correct modular type for an io-pgtable module.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/9-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
We already have memory in the union here that is being wasted in AMD's
case, use it to store the nid.
Putting the nid here further isolates the io_pgtable code from the struct
protection_domain.
Fixup protection_domain_alloc so that the NID from the device is provided,
at this point dev is never NULL for AMD so this will now allocate the
first table pointer on the correct NUMA node.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/8-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This struct is already in iop.cfg, we don't need two.
AMD is using this API sort of wrong, the cfg is supposed to be passed in
and then the allocation function will allocate ops memory and copy the
passed config into the new memory. Keep it kind of wrong and pass in the
cfg memory that is already part of the pagetable struct.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There is struct protection_domain iopt and struct amd_io_pgtable iopt.
Next patches are going to want to write domain.iopt.iopt.xx which is quite
unnatural to read.
Give one of them a different name, amd_io_pgtable has fewer references so
call it pgtbl, to match pgtbl_cfg, instead.
Suggested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Looks like many refactorings here have left this confused. There is only
one storage of the root/mode, it is in the iop struct.
increase_address_space() calls amd_iommu_domain_set_pgtable() with values
that it already stored in iop a few lines above.
amd_iommu_domain_clr_pt_root() is zero'ing memory we are about to free. It
used to protect against a double free of root, but that is gone now.
Remove amd_iommu_domain_set_pgtable(), amd_iommu_domain_set_pt_root(),
amd_iommu_domain_clr_pt_root() as they are all pointless.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
It is a serious bug if the domain is still mapped to any DTEs when it is
freed as we immediately start freeing page table memory, so any remaining
HW touch will UAF.
If it is not mapped then dev_list is empty and amd_iommu_domain_update()
does nothing.
Remove it and add a WARN_ON() to catch this class of bug.
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When using io_pgtable the correct pgsize_bitmap is stored in the cfg, both
v1_alloc_pgtable() and v2_alloc_pgtable() set it correctly.
This fixes a bug where the v2 pgtable had the wrong pgsize as
protection_domain_init_v2() would set it and then do_iommu_domain_alloc()
immediately resets it.
Remove the confusing ops.pgsize_bitmap since that is not used if the
driver sets domain.pgsize_bitmap.
Fixes: 134288158a41 ("iommu/amd: Add domain_alloc_user based domain allocation")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Domain allocation is always done under a sleepable context, the v1 path
and other drivers use GFP_KERNEL already. Fix the v2 path to also use
GFP_KERNEL.
Fixes: 0d571dcbe7c6 ("iommu/amd: Allocate page table using numa locality info")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
All the page table memory should be allocated/free within the io_pgtable
struct. The v2 path is already doing this, make it consistent.
It is hard to see but the free of the root in protection_domain_free() is
a NOP on the success path because v1_free_pgtable() does
amd_iommu_domain_clr_pt_root().
The root memory is already freed because free_sub_pt() put it on the
freelist. The free path in protection_domain_free() is only used during
error unwind of protection_domain_alloc().
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Rename admin_led_lower to admin-led-lower-hog.
Rename gpio rs485_en as rs485-en-hog.
Rename gpio uart4_rs485_en to uart4-rs485-en-hog.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: gpio@76:
'admin_led_lower' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtb:
gpio@30230000: 'rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtb:
gpio@30220000: 'uart4_rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
VAR-SOM-MX8MP SoM
Adds the DTSI file for the Variscite VAR-SOM-MX8MP System on Module which
is delivered with the Variscite Symphony Evaluation Kit.
Initial support includes:
- Serial console
- eMMC
- SD card
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Variscite VAR-SOM-MX8MM System-on-Module cannot be used alone
without motherboard, so drop the top-level compatible field to avoid any
false impression that such usage is possible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add RTC PCF2131 node for new ls1088ardb board..
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove unnecessary comments. The Colibri-iMX8X doesn't support FlexCAN,
and the GPU is already enabled in the SOC dtsi.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Change enet0_lpcg to get the clock value needed in Colibri-iMX8X for
100mbps ethernet.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add adma_pwm node for Colibri-iMX8X carrier boards.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable VPU on Colibri-iMX8X.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add USB3803 HUB, this is required for Bluetooth and USB
functionalities.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add PMIC thermal zones.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add audio support for Colibri-iMX8X sound card.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add fxl6408 gpio expander, this is required for Wi-Fi, Bluetooth and USB
functionalities.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add adc nodes for analog inputs support for all Colibri-iMX8X carrier
boards.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add USB HOST and OTG support to Colibri-iMX8X carrier boards.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable usb3.0 and related usb type C nodes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add i2c node in mipi[0,1] subystem for imx8qm-mek.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add pwm[0,1] and i2c[0,1] in lvds subsystem.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add two cm4 remote-proc and related memory regions.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Include common imx8-ss-mipi0.dtsi and imx8-ss-mipi1.dtsi.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add basic mipi subsystem for imx8qm and imx8qxp.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add irqsteer, pwm and i2c in lvds subsystem.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add basic lvds0 and lvds1 subsystem for imx8qm an imx8qxp.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add NETCMIX block control support.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The GW7905 was renamed to GW7500 before production release.
While we typically do not change compatibles, the GW7905 was never
released before its product name was changed to a GW7500.
The use the the 'xx' wildcard is to denote the fact that this
device-tree can support range of board models from GW7500 to GW7599 as
has been done historically with the Gateworks baseboards to support
various build customizatoins based on the same PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
J702 on i.MX93 11x11 EVK base board is a 40-pin connector labelled
"LVDS". This connector supports PWM backlight with default 12V power
supply and ADP5585 PWM controller. Add support for the backlight.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the Mini PCIe slot.
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
J17 on i.MX8mp EVK base board is a HDMI type A connector.
It connects with i.MX8mp HDMI PHY. Add support for it.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The merge of imx-spdif driver into fsl-asoc-card brought
new DT properties that can be used with the "fsl,imx-audio-spdif"
compatible:
* The "spdif-controller" property from imx-spdif is named "audio-cpu"
in fsl-asoc-card.
* fsl-asoc-card uses codecs explicitly declared in DT
with "audio-codec".
With an S/PDIF, codec drivers spdif_transmitter and
spdif_receiver should be used.
Driver imx-spdif used instead the dummy codec and a pair of
boolean properties, "spdif-in" and "spdif-out".
While backward compatibility is kept to support properties
"spdif-controller", "spdif-in" and "spdif-out", using new properties has
several benefits:
* "audio-cpu" and "audio-codec" are more generic names reflecting
that the fsl-asoc-card driver supports multiple hardware.
They are properties already used by devices using the
fsl-asoc-card driver.
They are also similar to properties of simple-card: "cpu" and "codec".
* "spdif-in" and "spdif-out" imply the use of the dummy codec in the
driver. However, there are already two codec drivers for the S/PDIF,
spdif_transmitter and spdif_receiver.
It is better to declare S/PDIF Tx and Rx devices in a DT, and then
reference them with "audio-codec" than using the dummy codec.
For those reasons, this commit updates in-tree DTs to use the new
properties:
* Rename "spdif-controller" property to "audio-cpu".
* Declare S/PDIF transmitter and/or receiver devices, and use them with
the "audio-codec" property instead of "spdif-out" and/or "spdif-in".
These modifications were tested only on an imx8mn-evk board.
Note that out-of-tree and old DTs are still supported.
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is a second HDMI connector on the baseboard which is routed
to the DW HDMI bridge through the PVI to the LCDIF3 and requires the
HDMI PHY to be enabled too.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to binding doc, DVDD-supply and DOVDD-supply is required
properties. Add these to fix below warning:
arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dtb: camera@10: 'DVDD-supply' is a required proper
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Remove fallback comaptible string arm,cortex-a9-gic to fix below warning:
/home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/s32v234-evb.dtb: interrupt-controller@7d001000: compatible: 'oneOf' conditional failed, one must be fixed:
['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is too long
/home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/s32v234-evb.dtb: interrupt-controller@7d001000: compatible: 'oneOf' conditional failed, one must be fixed:
['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is too long
'nvidia,tegra210-agic' was expected
'arm,cortex-a15-gic' is not one of ['nvidia,tegra186-agic', 'nvidia,tegra194-agic', 'nvidia,tegra234-agic']
'arm,gic-400' was expected
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Change to low case for hex value to fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: flash@0:
partitions: Unevaluated properties are not allowed ('partition@5C0000' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|