| Age | Commit message (Collapse) | Author |
|---|
|
MASK_VAL() was added as a way to handle bit_offset and bit_width for
registers located in system memory address space. However, while suited
for reading, it does not work for writing and result in corrupted
registers when writing values with bit_offset > 0. Moreover, when a
register is collocated with another one at the same address but with a
different mask, the current code results in the other registers being
overwritten with 0s. The write procedure for SYSTEM_MEMORY registers
should actually read the value, mask it, update it and write it with the
updated value. Moreover, since registers can be located in the same
word, we must take care of locking the access before doing it. We should
potentially use a global lock since we don't know in if register
addresses aren't shared with another _CPC package but better not
encourage vendors to do so. Assume that registers can use the same word
inside a _CPC package and thus, use a per _CPC package lock.
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20240826101648.95654-1-cleger@rivosinc.com
[ rjw: Dropped redundant semicolon ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add ACPI support in PLIC driver. Use the mapping created early during
boot to get details about the PLIC.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Co-developed-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20240812005929.113499-18-sunilvl@ventanamicro.com
[ rjw: Rebase on top of recent irqchip changes ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use devm_clk_get_enabled() simplify zynq_gpio_probe() and zynq_gpio_remove().
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Rong Qianfeng <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20240820121651.29706-3-rongqianfeng@vivo.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This patch added the support for version C.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20240902090845.1862354-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sort the headers in alphabetic order in order to ease
the maintenance for this part.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240902103203.2476576-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The commit had been applied twice as
0f245463b01e ("spi: ppc4xx: handle irq_of_parse_and_map() errors")
and
f1011ba20b83 ("spi: ppc4xx: handle irq_of_parse_and_map() errors")
This reverts commit f1011ba20b83da3ee70dcb4a6d9d282a718916fa.
Fixes: f1011ba20b83 ("spi: ppc4xx: handle irq_of_parse_and_map() errors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240902102853.2476165-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
By default regmap uses a mutex to protect the regmap but we also support
other kinds of locking, including spinlocks, which can have an impact
especially around allocations. Ensure that we are covering the spinlock
case by running tests configured using fast I/O, this causes the core to
use a spinlock instead of a mutex. Running every single test would be
redundant but cover most of them.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240901-regmap-test-fast-io-v1-1-aad83a871bcc@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240831094231.795024-1-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace a comma between expression statements by a semicolon.
Fixes: d786e00d19f9 ("drivers: hv, hyperv_fb: Untangle and refactor Hyper-V panic notifiers")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The functions definition of ti_bandgap_read_thot(),
ti_bandgap_write_thot(), ti_bandgap_read_tcold() and
ti_bandgap_write_tcold() has been removed since commit 9bebf3485c6a
("thermal: ti-soc-thermal: remove dead code"), remain the declarations
untouched in the header files. So, clean up this unused declarations.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20240812125210.94280-1-zhangzekun11@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing __maybe_unused notations from the suspend/resume()
functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20240820012616.1449210-2-festevam@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The combined usage of pm_sleep_ptr() and DEFINE_SIMPLE_DEV_PM_OPS()
allows the compiler to evaluate if the suspend/resume() functions
are used at build time or are simply dead code.
This allows removing __maybe_unused notations from the suspend/resume()
functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20240820012616.1449210-1-festevam@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Signed-off-by: Huan Yang <link@vivo.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240820094450.101976-1-link@vivo.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add compatible for sensors representing support on SA8255p.
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240828203721.2751904-14-quic_nkela@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
There is a extraneous space after a newline in a dev_err message.
Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20240901162719.144406-1-colin.i.king@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
dev_err_probe() is used to log an error message during the probe process
of a device.
It can simplify the error path and unify a message template.
Using this helper is totally fine even if err is known to never
be -EPROBE_DEFER.
The benefit compared to a normal dev_err() is the standardized format
of the error code, it being emitted symbolically and the fact that
the error code is returned which allows more compact error paths.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Link: https://lore.kernel.org/r/20240830103918.501234-1-yanzhen@vivo.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Switch to thermal_of_zone to handle thermal-zones. Replace
thermal_zone_device_register() by devm_thermal_of_zone_register() and
remove ops st_thermal_get_trip_type, st_thermal_get_trip_temp.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Link: https://lore.kernel.org/r/20240716-thermal-v4-2-947b327e165c@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based kernel configuration guards.
Remove those guards on every ST thermal related drivers.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Link: https://lore.kernel.org/r/20240716-thermal-v4-1-947b327e165c@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
On newer SoCs, the thermal hardware can require a power domain to
operate so add corresponding optional property.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710223214.2348418-3-gnstark@salutedevices.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Kernel test robot reported a few trucation warnings at the snprintf:
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:
In function ‘tegra241_vintf_free_lvcmdq’:
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:239:56:
warning: ‘%u’ directive output may be truncated writing between 1 and
5 bytes into a region of size between 3 and 11 [-Wformat-truncation=]
239 | snprintf(header, hlen, "VINTF%u: VCMDQ%u/LVCMDQ%u: ",
| ^~
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:239:32: note: directive argument
in the range [0, 65535]
239 | snprintf(header, hlen, "VINTF%u: VCMDQ%u/LVCMDQ%u: ",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/iommu/arm/arm-smmu-v3/tegra241-cmdqv.c:239:9: note: ‘snprintf’ output
between 25 and 37 bytes into a destination of size 32
239 | snprintf(header, hlen, "VINTF%u: VCMDQ%u/LVCMDQ%u: ",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
240 | vcmdq->vintf->idx, vcmdq->idx, vcmdq->lidx);
Fix by bumping up the size of the header to hold more characters.
Fixes: 918eb5c856f6 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409020406.7ed5uojF-lkp@intel.com/
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/20240902055745.629456-1-nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The mpc8xxx GPIO can generate an interrupt on state change. This
interrupt can be used to wake up the device from its sleep state if
enabled to do so. Add required support to the driver so that the GPIO
can be used in this way.
In order for the GPIO to actually function in this way, it is necessary
to also set the GPIO bit in the RCPM. This can be done via the device
tree fsl,rcpm-wakeup property.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Link: https://lore.kernel.org/r/20240820143328.1987442-1-martyn.welch@collabora.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Fix the build warning with W=1 flag,
"Excess struct member 'compatible' description in 'syscon_gpio_data' "
by removing the documentation for the non existent member.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20240902-b4-gpio-fix-v1-1-49a997994fa5@ti.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use devm_clk_get_enabled() simplify xway_stp_probe().
Signed-off-by: Rong Qianfeng <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20240820121651.29706-2-rongqianfeng@vivo.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There is no reason to keep deprecated legacy API implementations
in the gpiolib-devres.c. Consolidate devm_gpio_*() with other legacy
APIs. While at it, clean up header inclusion block in gpiolib-devres.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240828151357.2677340-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
$ scripts/kernel-doc -v -none -Wall drivers/gpio/gpiolib* 2>&1 | grep -w warning | wc -l
67
Fix these by adding Return sections. While at it, make sure all of
Return sections use the same style.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240828164449.2777666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240822223332.705560-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240822225818.707550-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240822225300.707178-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240822224737.706870-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240822225629.707365-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240822224130.706564-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240822223845.706346-1-andy.shevchenko@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use the IS_ERR_OR_NULL() helper instead of open-coding a
NULL and an error pointer checks to simplify the code and
improve readability.
No functional changes are intended.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240828122039.3697037-1-lihongbo22@huawei.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
rm .*.cmd when calling make clean
Signed-off-by: zhangjiao <zhangjiao2@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240829062942.11487-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The core schema in dtschema already strictly defines contents of nodes
with "gpio-hog" property (with additionalProperties: false), thus the
only thing device schema should do is: define "type: object" and
required "gpio-hog". Make the code a bit simpler by removing redundant
parts.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240828-dt-bindings-gpio-hog-v1-3-63b83e47d804@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
GPIO hog nodes should define type, otherwise "dummy-hog" boolean
properties would be allowed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240828-dt-bindings-gpio-hog-v1-1-63b83e47d804@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
When debug_fence_free() is unused
(CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=n), it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:
.../i915_sw_fence.c:118:20: error: unused function 'debug_fence_free' [-Werror,-Wunused-function]
118 | static inline void debug_fence_free(struct i915_sw_fence *fence)
| ^~~~~~~~~~~~~~~~
Fix this by marking debug_fence_free() with __maybe_unused.
See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: fc1584059d6c ("drm/i915: Integrate i915_sw_fence with debugobjects")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 8be4dce5ea6f2368cc25edc71989c4690fa66964)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n),
it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
.../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function]
97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fix this by marking debug_fence_init_onstack() with __maybe_unused.
See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: 214707fc2ce0 ("drm/i915/selftests: Wrap a timer into a i915_sw_fence")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5bf472058ffb43baf6a4cdfe1d7f58c4c194c688)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
On ilk/snb the pipe may be configured to place the LUT before or
after the CSC depending on various factors, but as there is only
one LUT (no split mode like on IVB+) we only advertise a gamma_lut
and no degamma_lut in the uapi to avoid confusing userspace.
This can cause a problem during readout if the VBIOS/GOP enabled
the LUT in the pre CSC configuration. The current code blindly
assigns the results of the readout to the degamma_lut, which will
cause a failure during the next atomic_check() as we aren't expecting
anything to be in degamma_lut since it's not visible to userspace.
Fix the problem by assigning whatever LUT we read out from the
hardware into gamma_lut.
Cc: stable@vger.kernel.org
Fixes: d2559299d339 ("drm/i915: Make ilk_read_luts() capable of degamma readout")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710124137.16773-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit 33eca84db6e31091cef63584158ab64704f78462)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
If the GSC FW fails to load the GSC HW hangs permanently; the only ways
to recover it are FLR or D3cold entry, with the former only being
supported on driver unload and the latter only on DGFX, for which we
don't need to load the GSC. Therefore, if GSC fails to load there is no
need to try again because the HW is stuck in the error state and the
submission to load the FW would just hang the GSCCS.
Note that, due to wa_14015076503, on MTL the GuC escalates all GSCCS
hangs to full GT resets, which would trigger a new attempt to load the
GSC FW in the post-reset HW re-init; this issue is also fixed by not
attempting to load the GSC FW after an error.
Fixes: 15bd4a67e914 ("drm/i915/gsc: GSC firmware loading")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.3+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820215952.2290807-1-daniele.ceraolospurio@intel.com
(cherry picked from commit 03ded4d432a1fb7bb6c44c5856d14115f6f6c3b9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v6.12-rc1
The changes in this set remove some unused code and simplify error paths
using scoped helpers.
* tag 'tegra-for-6.12-firmware' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: bpmp: Use scoped device node handling to simplify error paths
firmware: tegra: bpmp: Drop unused mbox_client_to_bpmp()
Link: https://lore.kernel.org/r/20240830141004.3195210-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.12-rc1
This is a single patch that simplifies code a little by employing the
new scoped OF helpers.
* tag 'tegra-for-6.12-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Simplify with scoped for each OF child loop
Link: https://lore.kernel.org/r/20240830141004.3195210-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.12
Few main features include:
1. SCMI transport as stand-alone drivers
Currently the SCMI transport layer is being built embedded into in
the core SCMI stack. Some of these transports, despite being currently
part of the main SCMI module, are indeed also registered with different
subsystems like optee or virtio, and actively probed also by those.
This leads to a few awkward and convoluted tricks to properly handle
such interactions at boot time in the SCMI stack.
This change adds the new logic to the core SCMI stack so that each
existing transport is transitioned to be a standi-alone driver. With
that all the probe deferral and awkward retries between the SCMI
core stack and the transports has been removed, since no more needed.
2. Support for obtaining transport descriptors from the devicetree
SCMI platform firmwares might have different designs depending on
the platform. Some of the transport descriptors rely on such design.
E.g. the maximum receive channel timeout value might vary depending
on the specific underlying hardware and firmware design choices.
This change adds support for max-rx-timeout-ms property to describe
the transport needs of a specific platform design. It will be extended
in the future to obtain other such hardware/firmware dependent
transport related descriptors.
3. NXP i.MX95 specific SCMI vendor protocol extensions
SCMI specification allows vendor or platform-specific extensions to
the interface. NXP i.MX95 System Manager(SM) that implements SCMI
extends the interface to implement couple of vendor/platform specific
protocol, namely:
a. Battery Backed Module(BBM) Protocol
This protocol is intended provide access to the battery-backed
module. This contains persistent storage (GPR), an RTC, and the
ON/OFF button. The protocol can also provide access to similar
functions implemented via external board components.
b. MISC Protocol for misc settings
This includes controls that are misc settings/actions that must
be exposed from the SM to agents. They are device specific and
are usually define to access bit fields in various mix block
control modules, IOMUX_GPR, and other GPR/CSR owned by the SM.
4. SCMI debug/tracking metrics
Since SCMI involves interaction with the entity(software, firmware
and/or hardware) providing services or features, it is quite useful
to track certain metrics(for pure debugging purposes) like how many
messages were sent or received, were there any failures, what kind
of failures, ..etc. This feature adds support for the same via debugfs.
Apart from these main features, there are some miscellaneous updates, fixes
and cleanups.
* tag 'scmi-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (31 commits)
rtc: support i.MX95 BBM RTC
input: keyboard: support i.MX95 BBM module
firmware: imx: Add i.MX95 MISC driver
firmware: arm_scmi: Add initial support for i.MX MISC protocol
firmware: arm_scmi: Add initial support for i.MX BBM protocol
firmware: arm_scmi: Add NXP i.MX95 SCMI documentation
dt-bindings: firmware: Add i.MX95 SCMI Extension protocol
firmware: arm_scmi: Replace comma with the semicolon
firmware: arm_scmi: Replace the use of of_node_put() to __free(device_node)
firmware: arm_scmi: Fix trivial whitespace/coding style issues
firmware: arm_scmi: Use max-rx-timeout-ms from devicetree
dt-bindings: firmware: arm,scmi: Introduce property max-rx-timeout-ms
firmware: arm_scmi: Remove const from transport descriptors
firmware: arm_scmi: Simplify with scoped for each OF child loop
firmware: arm_scmi: Update various protocols versions
firmware: arm_scmi: Remove legacy transport-layer code
firmware: arm_scmi: Make VirtIO transport a standalone driver
firmware: arm_scmi: Make OPTEE transport a standalone driver
firmware: arm_scmi: Make SMC transport a standalone driver
firmware: arm_scmi: Make MBOX transport a standalone driver
...
Link: https://lore.kernel.org/r/20240830135918.2383664-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.12
The main addition this time is the basic support for FF-A v1.2
specification which includes support for newly added:
1. FFA_MSG_SEND_DIRECT_{REQ,RESP}2
2. FFA_PARTITION_INFO_GET_REGS
3. FFA_YIELD support in direct messaging
Apart from these, the changes include support to fetch the Rx/Tx buffer
size using FFA_FEATURES, addition of the FF-A FIDs for v1.2 and some
coding style cleanups.
* tag 'ffa-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fetch the Rx/Tx buffer size using ffa_features()
firmware: arm_ffa: Add support for FFA_YIELD in direct messaging
firmware: arm_ffa: Add support for FFA_MSG_SEND_DIRECT_{REQ,RESP}2
firmware: arm_ffa: Add support for FFA_PARTITION_INFO_GET_REGS
firmware: arm_ffa: Move the function ffa_features() earlier
firmware: arm_ffa: Update the FF-A command list with v1.2 additions
firmware: arm_ffa: Some coding style fixes
Link: https://lore.kernel.org/r/20240830135759.2383431-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into soc/drivers
Some long due cleanups and modernizations of the Versatile
SoC drivers from Krzysztof:
- Put OF handle
- Use devres to avoid memory leaks
- Enable compile testing
* tag 'versatile-soc-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
soc: versatile: enable compile testing
soc: versatile: realview: fix soc_dev leak during device remove
soc: versatile: realview: fix memory leak during device remove
soc: versatile: integrator: fix OF node leak in probe() error path
Link: https://lore.kernel.org/r/CACRpkda244rFHnnXPDPOhmKiJsRP08tNCcfFzpH5zR2cx1DFpw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add Mobileye EyeQ reset controller driver, for EyeQ5, EyeQ6L and EyeQ6H
SoCs. Instances belong to a shared register region called OLB and gets
spawned as auxiliary device to the platform driver for clock.
There is one OLB instance for EyeQ5 and EyeQ6L. There are seven OLB
instances on EyeQ6H; three have a reset controller embedded:
- West and east get handled by the same compatible.
- Acc (accelerator) is another one.
Each instance vary in the number and types of reset domains.
Instances with single domain expect a single cell, others two.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240730-mbly-reset-v2-2-00b870a6a2ff@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Switch from one sub-node per functionality in the system-controller to a
single node representing the entire OLB instance. This is the
recommended approach for controllers handling many different
functionalities; it is a single controller and should be represented by
a single devicetree node.
The reset bindings is removed and all properties will be described by:
soc/mobileye/mobileye,eyeq5-olb.yaml
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240730-mbly-reset-v2-1-00b870a6a2ff@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
There are 7 sets of Reset Source in Amlogic T7 SoC reset controller,
and the offset between base and level registers is 0x40.
Add a new compatible string and struct meson_reset_param to support
the reset controller on T7 SoC.
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240422-t7-reset-v2-2-cb82271d3296@amlogic.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
