summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-04-26ssb: Use relative offsets for SPROMRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26ssb: Look for SPROM at different offset on higher rev CCRafał Miłecki
Our offset handling becomes even a little more hackish now. For some reason I do not understand all offsets as inrelative. It assumes base offset is 0x1000 but it will work for now as we make offsets relative anyway by removing base 0x1000. Should be cleaner however. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26ssb: do not read SPROM if it does not existJohn W. Linville
Attempting to read registers that don't exist on the SSB bus can cause hangs on some boxes. At least some b43 devices are 'in the wild' that don't have SPROMs at all. When the SSB bus support loads, it attempts to read these (non-existant) SPROMs and causes hard hangs on the box -- no console output, etc. This patch adds some intelligence to determine whether or not the SPROM is present before attempting to read it. This avoids those hard hangs on those devices with no SPROM attached to their SSB bus. The SSB-attached devices (e.g. b43, et al.) won't work, but at least the box will survive to test further patches. :-) Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Michael Buesch <mb@bu3sch.de>
2010-04-21radiotap parser: fix endian annotationJohannes Berg
When I updated this from the corresponding userspace library, an annotation error crept in -- this variable needs to be annotated as little endian. No effect on code generation. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-21ath9k_hw: make all AR9002 initvals use u32Luis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-21ath9k_hw: make two initvals consto for the AR9001 familyLuis R. Rodriguez
This makes ar5416Addac_9160 and ar5416Addac_9160 const I guess we skipped them long ago. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20mac80211: Fix ieee80211_sta_conn_mon_timer with hw connection monitoringJuuso Oikarinen
When IEEE80211_HW_CONNECTION_MONITOR is configured by the driver, starting of ieee80211_sta_conn_mon_timer should be prevented, as it is then not needed. This is currently partially the case. As it seems, when a probe-response is received from the AP the timer is still restarted, thus restarting the host based connection keep-alive mechanism. These probe-responses happen at least when scanning while associated. Fix this by preventing starting of the ieee80211_sta_conn_mon_timer in the ieee80211_rx_mgmt_probe_resp function. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: set the STBC flag in rate control if the peer supports itFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: add support for Tx and Rx STBCFelix Fietkau
Supported only for single stream rates by the hardware Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20mac80211: add flags for STBC (Space-Time Block Coding)Felix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: initialize the number of tx/rx streams correctlyFelix Fietkau
AR9300 based hardware can 3x3 MCS rates, this should be set in the HT capabilities. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: reduce the bits_per_symbol table size, support more streamsFelix Fietkau
Instead of increasing bits_per_symbol for supporting more streams, keep it single-stream only and multiply the values by the numer of streams. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: update the ath_max_4ms_framelen tableFelix Fietkau
Include MCS0-31 and also add SGI for HT20. This makes it possible to support more different rate combinations with newer hardware. Based on a patch by Selvam. T. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: update the MCS mask for MCS16 and aboveFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: clean up tx buffer handlingFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: check for specific rx stuck conditions and recover from themFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20mac80211: document IEEE80211_CONF_CHANGE_QOSStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath5k: basic support for surveyHolger Schurig
This adds the first element of survey data, the noise floor figure. Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20mac80211: sample survey implementation for mac80211 & hwsimHolger Schurig
This adds the survey function to both mac80211 itself and to mac80211_hwsim. For the latter driver, we simply invent some noise level.A real driver which cannot determine the real channel noise MUST NOT report any noise, especially not a magically conjured one :-) Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: Group Key fix for VAPsDaniel Yingqiang Ma
When I set up multiple VAPs with ath9k, I encountered an issue that the traffic may be lost after a while. The detailed phenomenon is 1. After a while the clients connected to one of these VAPs will get into a state that no broadcast/multicast packets can be transfered successfully while the unicast packets can be transfered normally. 2. Minutes latter the unitcast packets transfer will fail as well, because the ARP entry is expired and it can't be freshed due to the broadcast trouble. It's caused by the group key overwritten and someone discussed this issue in ath9k-devel maillist before, but haven't work out a fix yet. I referred the method in madwifi, and made a patch for ath9k. The method is to set the high bit of the sender(AP)'s address, and associated that mac and the group key. It requires the hardware supports multicast frame key search. It seems true for AR9160. Not sure whether it's the correct way to fix this issue. But it seems to work in my test. The patch is attached, feel free to revise it. Signed-off-by: Daniel Yingqiang ma <yma.cool@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19wireless: rt2x00: rt2800usb: identify Allwin devicesXose Vazquez Perez
Applied common sense, no info from the manufacturer: (0x8516, 0x2070) is RT2070 (0x8516, 0x2770) is RT2770 (0x8516, 0x2870) is RT2870 [...] Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19mac80211: add missing newlineJohannes Berg
One HT debugging printk is missing a newline, add it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19orinoco: have sparse check endian issuesDavid Kilroy
Orinoco should be endian clean, so enable the checking. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19orinoco: use cfg80211_find_ieDavid Kilroy
Instead of using a local function. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19orinoco: implement set_wiphy_paramsDavid Kilroy
... to set fragmentation and RTS thresholds. Also report RTS retry settings during wiphy init. Note that the existing semantics for enabling microwave robustness are preserved on firmwares that have it. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19mac80211: Prevent running sta_cleanup timer unnecessarilyJuuso Oikarinen
The sta_cleanup timer is used to periodically expire buffered frames from the tx buf. The timer is executing periodically, regardless of the need for it. This is wasting resources. Fix this simply by not restarting the sta_cleanup timer if the tx buffer was empty. Restart the timer when there is some more tx-traffic. Cc: Janne Ylälehto <janne.ylalehto@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19mac80211: fix stopping RX BA session from timerJohannes Berg
Kalle reported that his system deadlocks since my recent work in this area. The reason quickly became apparent: we try to cancel_timer_sync() a timer from within itself. Fix that by making the function aware of the context it is called from. Reported-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19mac80211: fix typo in commentsDaniel Halperin
The flag is called IEEE80211_TX_STAT_AMPDU rather than using the whole word STATUS. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-04-19mac80211: pass HT changes to driver when off channelReinette Chatre
Since "mac80211: make off-channel work generic" drivers have not been notified of configuration changes after association or authentication. This caused more dependence on current state to ensure driver will be notified when configuration changes occur. One such problem arises if off-channel is in progress when HT information changes. Since HT is only enabled on the "oper_channel" the driver will never be notified of this change. Usually the driver is notified soon after of a BSS information change (BSS_CHANGED_HT) ... but since the driver did not get a notification that this is a HT channel the new BSS information does not make sense. Fix this by also changing the off-channel information when HT is enabled and thus cause driver to be notified correctly. This fixes a problem in 4965 when associated with 5GHz 40MHz channel. Without this patch the system can associate but is unable to transfer any data, not even ping. See http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2158 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19mac80211: remove bogus TX agg state assignmentJohannes Berg
When the addba timer expires but has no work to do, it should not affect the state machine. If it does, TX will not see the successfully established and we can also crash trying to re-establish the session. Cc: stable@kernel.org [2.6.32, 2.6.33] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16iwlwifi: make scan antenna forcing more genericJohannes Berg
Some future hardware will also require some antenna overrides so make the current logic more generic; right now it is semantically based on a workaround for off-channel reception but the reasons for the new antenna overrides will be different. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: remove monitor checkJohannes Berg
Off-channel reception is acceptable in monitor mode, and checking for monitor mode this way is not really correct anyway since it could be the case while operating. Now iwl_is_monitor_mode() is no longer used so remove it completely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: don't check monitor for scanningJohannes Berg
Monitor mode operation need not (and probably should not) affect scanning this way since real monitoring can not properly happen while scanning anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: rename TX_CMD_FLG_BT_DIS_MSKJohannes Berg
The flag name is a little misleading, this flag instructs the device to ignore bluetooth messages for purposes of frame transmissions, so rename the flag to TX_CMD_FLG_IGNORE_BT. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: make BT coex config a virtual methodJohannes Berg
Some future hardware will require a different command to be sent for bluetooth coexist, so make this a virtual method that can be changed on a per-device basis. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: more code clean up for agn devicesWey-Yi Guy
Since multiple new devices having similar uCode architecture and use same registers address, remove more reference to 5000 series to eliminate the confusion. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: sanity check for turn on aggregation tidWey-Yi Guy
Perform sanity check for turn on aggregation tid. Also remove the option for turn on all the aggregation tids at once since it is deprecated function and not being used. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: PA type for 6000g2 seriesWey-Yi Guy
For 6000g2 series of NICs, PA type is determined by uCode, driver do not have to set the register for internal/external PA. It is a workaround just for 6000 series NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: add hw revision for 6000g2 NICWey-Yi Guy
Add hardware revision for 6000g2 series of NIC Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: remove redundant iwl_dump_lq_cmd()Shanyu Zhao
This function is called twice in a row, remove the second one. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: add debugfs ops to iwlwifiAbhijeet Kolekar
Seperate debugfs functions into iwlagn specific debugfs file and Add debugfs ops to iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: remove duplicated debug functionsWey-Yi Guy
Use the show uCode statistics function for uCode debugging purposes only; it is being duplicated in both debugfs and sysfs. remove the one from sysfs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: bring up 6000 Series 2x2 AGN Gen2 adaptersShanyu Zhao
This patch is to bring up 6000 Series 2x2 AGN Gen2 adapters. Seperate various version numbers from 6000 Series definitions; Add module firmware declaration for the new adapters; Add additional device IDs and subsystem IDs; Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: more generic eeprom definesWey-Yi Guy
Some definition for eeprom apply to more than 5000 series device, change the name to reflect it for easy reading. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: trigger scan synchronouslyJohannes Berg
Scan requesting doesn't need to be asynchronous since all code paths leading up to it can sleep. Make the scan request a new util operation that is hw-specific (to account for 3945 vs. agn) and call it right in place. This patch moves a lot of code into iwlagn as it need not be in iwlcore. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: rename priv->scan to priv->scan_cmdJohannes Berg
I keep checking what "priv->scan" is, so rename it to "priv->scan_cmd" which more clearly tells us what it is. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: remove scan_pass_startJohannes Berg
Since we no longer do a multi-pass scan, keeping track of how long each pass took is pointless since there will only be one. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: remove next_scan_jiffiesJohannes Berg
This logic is just confusing, if anything it belongs into mac80211. Also, even if we do scan during the EAPOL handshake, that will not cause any problems, just a short delay. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: correct atomic bitops usageJohannes Berg
With atomic bitops, test_and_{set,clear}_bit should be used instead of separate test_bit and set_bit/clear_bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 05:42:16 +0000