summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-26bnxt: don't enable NAPI until rings are readyJakub Kicinski
Netpoll can try to poll napi as soon as napi_enable() is called. It crashes trying to access a doorbell which is still NULL: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 59 PID: 6039 Comm: ethtool Kdump: loaded Tainted: G S 5.9.0-rc1-00469-g5fd99b5d9950-dirty #26 RIP: 0010:bnxt_poll+0x121/0x1c0 Code: c4 20 44 89 e0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 41 8b 86 a0 01 00 00 41 23 85 18 01 00 00 49 8b 96 a8 01 00 00 0d 00 00 00 24 <89> 02 41 f6 45 77 02 74 cb 49 8b ae d8 01 00 00 31 c0 c7 44 24 1a netpoll_poll_dev+0xbd/0x1a0 __netpoll_send_skb+0x1b2/0x210 netpoll_send_udp+0x2c9/0x406 write_ext_msg+0x1d7/0x1f0 console_unlock+0x23c/0x520 vprintk_emit+0xe0/0x1d0 printk+0x58/0x6f x86_vector_activate.cold+0xf/0x46 __irq_domain_activate_irq+0x50/0x80 __irq_domain_activate_irq+0x32/0x80 __irq_domain_activate_irq+0x32/0x80 irq_domain_activate_irq+0x25/0x40 __setup_irq+0x2d2/0x700 request_threaded_irq+0xfb/0x160 __bnxt_open_nic+0x3b1/0x750 bnxt_open_nic+0x19/0x30 ethtool_set_channels+0x1ac/0x220 dev_ethtool+0x11ba/0x2240 dev_ioctl+0x1cf/0x390 sock_do_ioctl+0x95/0x130 Reported-by: Rob Sherwood <rsher@fb.com> Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: disable netpoll on fresh napisJakub Kicinski
napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent netpoll from accessing rings before init is complete. However, the same is not done for fresh napi instances in netif_napi_add(), even though we expect NAPI instances to be added as disabled. This causes crashes during driver reconfiguration (enabling XDP, changing the channel count) - if there is any printk() after netif_napi_add() but before napi_enable(). To ensure memory ordering is correct we need to use RCU accessors. Reported-by: Rob Sherwood <rsher@fb.com> Fixes: 2d8bff12699a ("netpoll: Close race condition between poll_one_napi and napi_disable") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26ipv4: Silence suspicious RCU usage warningIdo Schimmel
fib_info_notify_update() is always called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB table list is traversed with hlist_for_each_entry_rcu(), but without a proper lockdep expression. Since modification of the list is protected by RTNL, silence the warning by adding a lockdep expression which verifies RTNL is held. [1] ============================= WARNING: suspicious RCU usage 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Not tainted ----------------------------- net/ipv4/fib_trie.c:2124 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/834: #0: ffffffff85a3b6b0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 834 Comm: ip Not tainted 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x143/0x14d fib_info_notify_update+0x8d1/0xa60 __nexthop_replace_notify+0xd2/0x290 rtm_new_nexthop+0x35e2/0x5946 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x32/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fde28c3be57 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffc09330028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fde28c3be57 RDX: 0000000000000000 RSI: 00007ffc09330090 RDI: 0000000000000003 RBP: 000000005f45f911 R08: 0000000000000001 R09: 00007ffc0933012c R10: 0000000000000076 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffc09330290 R14: 00007ffc09330eee R15: 00005610e48ed020 Fixes: 1bff1a0c9bbd ("ipv4: Add function to send route updates") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26drivers/net/wan/lapbether: Set network_header before transmittingXie He
Set the skb's network_header before it is passed to the underlying Ethernet device for transmission. This patch fixes the following issue: When we use this driver with AF_PACKET sockets, there would be error messages of: protocol 0805 is buggy, dev (Ethernet interface name) printed in the system "dmesg" log. This is because skbs passed down to the Ethernet device for transmission don't have their network_header properly set, and the dev_queue_xmit_nit function in net/core/dev.c complains about this. Reason of setting the network_header to this place (at the end of the Ethernet header, and at the beginning of the Ethernet payload): Because when this driver receives an skb from the Ethernet device, the network_header is also set at this place. Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26mptcp: free acked data before waiting for more memoryFlorian Westphal
After subflow lock is dropped, more wmem might have been made available. This fixes a deadlock in mptcp_connect.sh 'mmap' mode: wmem is exhausted. But as the mptcp socket holds on to already-acked data (for retransmit) no wakeup will occur. Using 'goto restart' calls mptcp_clean_una(sk) which will free pages that have been acked completely in the mean time. Fixes: fb529e62d3f3 ("mptcp: break and restart in case mptcp sndbuf is full") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26taprio: Fix using wrong queues in gate maskVinicius Costa Gomes
Since commit 9c66d1564676 ("taprio: Add support for hardware offloading") there's a bit of inconsistency when offloading schedules to the hardware: In software mode, the gate masks are specified in terms of traffic classes, so if say "sched-entry S 03 20000", it means that the traffic classes 0 and 1 are open for 20us; when taprio is offloaded to hardware, the gate masks are specified in terms of hardware queues. The idea here is to fix hardware offloading, so schedules in hardware and software mode have the same behavior. What's needed to do is to map traffic classes to queues when applying the offload to the driver. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: cdc_ncm: Fix build errorYueHaibing
If USB_NET_CDC_NCM is y and USB_NET_CDCETHER is m, build fails: drivers/net/usb/cdc_ncm.o:(.rodata+0x1d8): undefined reference to `usbnet_cdc_update_filter' Select USB_NET_CDCETHER for USB_NET_CDC_NCM to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e10dcb1b6ba7 ("net: cdc_ncm: hook into set_rx_mode to admit multicast traffic") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: hns3: Fix for geneve tx checksum bugYi Li
when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL and it is udp packet, which has a dest port as the IANA assigned. the hardware is expected to do the checksum offload, but the hardware will not do the checksum offload when udp dest port is 6081. This patch fixes it by doing the checksum in software. Reported-by: Li Bing <libing@winhong.com> Signed-off-by: Yi Li <yili@winhong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26Merge branch 'bnxt_en-Bug-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: Bug fixes. This set of driver patches include bug fixes for ethtool get channels, ethtool statistics, ethtool NVRAM, AER recovery, a firmware reset issue that could potentially crash, hwmon temperature reporting issue on VF, and 2 fixes for regressions introduced by the recent user-defined RSS map feature. Please queue patches 1 to 6 for -stable. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Setup default RSS map in all scenarios.Michael Chan
The recent changes to support user-defined RSS map assume that RX rings are always reserved and the default RSS map is set after the RX rings are successfully reserved. If the firmware spec is older than 1.6.1, no ring reservations are required and the default RSS map is not setup at all. In another scenario where the fw Resource Manager is older, RX rings are not reserved and we also end up with no valid RSS map. Fix both issues in bnxt_need_reserve_rings(). In both scenarios described above, we don't need to reserve RX rings so we need to call this new function bnxt_check_rss_map_no_rmgr() to setup the default RSS map when needed. Without valid RSS map, the NIC won't receive packets properly. Fixes: 1667cbf6a4eb ("bnxt_en: Add logical RSS indirection table structure.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: init RSS table for Minimal-Static VF reservationEdwin Peer
There are no VF rings available during probe when the device is configured using the Minimal-Static reservation strategy. In this case, the RSS indirection table can only be initialized later, during bnxt_open_nic(). However, this was not happening because the rings will already have been reserved via bnxt_init_dflt_ring_mode(), causing bnxt_need_reserve_rings() to return false in bnxt_reserve_rings() and bypass the RSS table init. Solve this by pushing the call to bnxt_set_dflt_rss_indir_tbl() into __bnxt_reserve_rings(), which is common to both paths and is called whenever ring configuration is changed. After doing this, the RSS table init that must be called from bnxt_init_one() happens implicitly via bnxt_set_default_rings(), necessitating doing the allocation earlier in order to avoid a null pointer dereference. Fixes: bd3191b5d87d ("bnxt_en: Implement ethtool -X to set indirection table.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: fix HWRM error when querying VF temperatureEdwin Peer
Firmware returns RESOURCE_ACCESS_DENIED for HWRM_TEMP_MONITORY_QUERY for VFs. This produces unpleasing error messages in the log when temp1_input is queried via the hwmon sysfs interface from a VF. The error is harmless and expected, so silence it and return unknown as the value. Since the device temperature is not particularly sensitive information, provide flexibility to change this policy in future by silencing the error rather than avoiding the HWRM call entirely for VFs. Fixes: cde49a42a9bb ("bnxt_en: Add hwmon sysfs support to read temperature") Cc: Marc Smith <msmith626@gmail.com> Reported-by: Marc Smith <msmith626@gmail.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Fix possible crash in bnxt_fw_reset_task().Michael Chan
bnxt_fw_reset_task() is run from a delayed workqueue. The current code is not cancelling the workqueue in the driver's .remove() method and it can potentially crash if the device is removed with the workqueue still pending. The fix is to clear the BNXT_STATE_IN_FW_RESET flag and then cancel the delayed workqueue in bnxt_remove_one(). bnxt_queue_fw_reset_work() also needs to check that this flag is set before scheduling. This will guarantee that no rescheduling will be done after it is cancelled. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Fix PCI AER error recovery flowVasundhara Volam
When a PCI error is detected the PCI state could be corrupt, save the PCI state after initialization and restore it after the slot reset. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Fix ethtool -S statitics with XDP or TCs enabled.Michael Chan
We are returning the wrong count for ETH_SS_STATS in get_sset_count() when XDP or TCs are enabled. In a recent commit, we got rid of irrelevant counters when the ring is RX only or TX only, but we did not make the proper adjustments for the count. As a result, when we have XDP or TCs enabled, we are returning an excess count because some of the rings are TX only. This causes ethtool -S to display extra counters with no counter names. Fix bnxt_get_num_ring_stats() by not assuming that all rings will always have RX and TX counters in combined mode. Fixes: 125592fbf467 ("bnxt_en: show only relevant ethtool stats for a TX or RX ring") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Check for zero dir entries in NVRAM.Vasundhara Volam
If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware command may return zero dir entries. Return error in such case to avoid zero length dma buffer request. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26bnxt_en: Don't query FW when netif_running() is false.Pavan Chebbi
In rare conditions like two stage OS installation, the ethtool's get_channels function may be called when the device is in D3 state, leading to uncorrectable PCI error. Check netif_running() first before making any query to FW which involves writing to BAR. Fixes: db4723b3cd2d ("bnxt_en: Check max_tx_scheduler_inputs value from firmware.") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-26net: dp83869: Fix RGMII internal delay configurationDaniel Gorsulowski
The RGMII control register at 0x32 indicates the states for the bits RGMII_TX_CLK_DELAY and RGMII_RX_CLK_DELAY as follows: RGMII Transmit/Receive Clock Delay 0x0 = RGMII transmit clock is shifted with respect to transmit/receive data. 0x1 = RGMII transmit clock is aligned with respect to transmit/receive data. This commit fixes the inversed behavior of these bits Fixes: 736b25afe284 ("net: dp83869: Add RGMII internal delay configuration") Signed-off-by: Daniel Gorsulowski <daniel.gorsulowski@esd.eu> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25ibmvnic fix NULL tx_pools and rx_tools issue at do_resetMingming Cao
At the time of do_rest, ibmvnic tries to re-initalize the tx_pools and rx_pools to avoid re-allocating the long term buffer. However there is a window inside do_reset that the tx_pools and rx_pools were freed before re-initialized making it possible to deference null pointers. This patch fix this issue by always check the tx_pool and rx_pool are not NULL after ibmvnic_login. If so, re-allocating the pools. This will avoid getting into calling reset_tx/rx_pools with NULL adapter tx_pools/rx_pools pointer. Also add null pointer check in reset_tx_pools and reset_rx_pools to safe handle NULL pointer case. Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: ethernet: ti: cpsw_new: fix clean up of vlan mc entries for host portMurali Karicheri
To flush the vid + mc entries from ALE, which is required when a VLAN interface is removed, driver needs to call cpsw_ale_flush_multicast() with ALE_PORT_HOST for port mask as these entries are added only for host port. Without this, these entries remain in the ALE table even after removing the VLAN interface. cpsw_ale_flush_multicast() calls cpsw_ale_flush_mcast which expects a port mask to do the job. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: ethernet: ti: cpsw: fix clean up of vlan mc entries for host portMurali Karicheri
To flush the vid + mc entries from ALE, which is required when a VLAN interface is removed, driver needs to call cpsw_ale_flush_multicast() with ALE_PORT_HOST for port mask as these entries are added only for host port. Without this, these entries remain in the ALE table even after removing the VLAN interface. cpsw_ale_flush_multicast() calls cpsw_ale_flush_mcast which expects a port mask to do the job. Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: caif: fix error code handlingTong Zhang
cfpkt_peek_head return 0 and 1, caller is checking error using <0 Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25net: dsa: mt7530: Add of_node_put() before break and return statementsSumera Priyadarsini
Every iteration of for_each_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in mt7530.c by inserting of_node_put() before the break and return statements. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-25gtp: add GTPA_LINK info to msg sent to userspaceNicolas Dichtel
During a dump, this attribute is essential, it enables the userspace to know on which interface the context is linked to. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Gabriel Ganne <gabriel.ganne@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24bpf, sysctl: Let bpf_stats_handler take a kernel pointer bufferTobias Klauser
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the signature of bpf_stats_handler to match ctl_table.proc_handler which fixes the following sparse warning: kernel/sysctl.c:226:49: warning: incorrect type in argument 3 (different address spaces) kernel/sysctl.c:226:49: expected void * kernel/sysctl.c:226:49: got void [noderef] __user *buffer kernel/sysctl.c:2640:35: warning: incorrect type in initializer (incompatible argument 3 (different address spaces)) kernel/sysctl.c:2640:35: expected int ( [usertype] *proc_handler )( ... ) kernel/sysctl.c:2640:35: got int ( * )( ... ) Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/bpf/20200824142047.22043-1-tklauser@distanz.ch
2020-08-24selftests/bpf: Fix test_progs-flavor run getting number of testsJesper Dangaard Brouer
Commit 643e7233aa94 ("selftests/bpf: Test_progs option for getting number of tests") introduced ability to getting number of tests, which is targeted towards scripting. As demonstrate in the commit the number can be use as a shell variable for further scripting. The test_progs program support "flavor", which is detected by the binary have a "-flavor" in the executable name. One example is test_progs-no_alu32, which load bpf-progs compiled with disabled alu32, located in dir 'no_alu32/'. The problem is that invoking a "flavor" binary prints to stdout e.g.: "Switching to flavor 'no_alu32' subdirectory..." Thus, intermixing with the number of tests, making it unusable for scripting. Fix the issue by only printing "flavor" info when verbose -v option is used. Fixes: 643e7233aa94 ("selftests/bpf: Test_progs option for getting number of tests") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/159827024012.923543.7104106594870150597.stgit@firesoul
2020-08-24bpf: Fix a buffer out-of-bound access when filling raw_tp link_infoYonghong Song
Commit f2e10bff16a0 ("bpf: Add support for BPF_OBJ_GET_INFO_BY_FD for bpf_link") added link query for raw_tp. One of fields in link_info is to fill a user buffer with tp_name. The Scurrent checking only declares "ulen && !ubuf" as invalid. So "!ulen && ubuf" will be valid. Later on, we do "copy_to_user(ubuf, tp_name, ulen - 1)" which may overwrite user memory incorrectly. This patch fixed the problem by disallowing "!ulen && ubuf" case as well. Fixes: f2e10bff16a0 ("bpf: Add support for BPF_OBJ_GET_INFO_BY_FD for bpf_link") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200821191054.714731-1-yhs@fb.com
2020-08-24Merge tag 'batadv-net-for-davem-20200824' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - Avoid uninitialized memory access when handling DHCP, by Sven Eckelmann - Fix check for own OGM in OGM receive handler, by Linus Luessing - Fix netif_rx access for non-interrupt context in BLA, by Jussi Kivilinna ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24sfc: fix boolreturn.cocci warning and rename functionEdward Cree
check_fcs() was returning bool as 0/1, which was a sign that the sense of the function was unclear: false was good, which doesn't really match a name like 'check_$thing'. So rename it to ef100_has_fcs_error(), and use proper booleans in the return statements. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: ocelot: Add of_node_put() before return statementSumera Priyadarsini
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak. Fix a potential memory leak in felix.c by inserting of_node_put() before the return statement. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24dt-bindings: net: dsa: Fix typoKurt Kanzenbach
Fix spelling mistake documenation -> documentation. Fixes: 5a18bb14c0f7 ("dt-bindings: net: dsa: Let dsa.txt refer to dsa.yaml") Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24firestream: Fix memleak in fs_openDinghao Liu
When make_rate() fails, vcc should be freed just like other error paths in fs_open(). Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: arc_emac: Fix memleak in arc_mdio_probeDinghao Liu
When devm_gpiod_get_optional() fails, bus should be freed just like when of_mdiobus_register() fails. Fixes: 1bddd96cba03d ("net: arc_emac: support the phy reset for emac driver") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24NFC: st95hf: Fix memleak in st95hf_in_send_cmdDinghao Liu
When down_killable() fails, skb_resp should be freed just like when st95hf_spi_send() fails. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24Merge branch 'MAINTAINERS-Remove-self-from-PHY-LIBRARY'David S. Miller
Florian Fainelli says: ==================== MAINTAINERS: Remove self from PHY LIBRARY This patch series aims at allowing myself to keep track of the Ethernet PHY and MDIO bus drivers that I authored or contributed to without being listed as a maintainer in the PHY library anymore. Thank you for the fish, I will still be around. This builds on top of Andrew's series: https://lore.kernel.org/netdev/20200822180611.2576807-1-andrew@lunn.ch/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24MAINTAINERS: Remove self from PHY LIBRARYFlorian Fainelli
My last significant achievements to the PHY library was ensuring we would have small bus factor by having Andrew and Heiner added. The world has moved on past 1G, but I have not, so let more competent maintainers take over. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24MAINTAINERS: Add entry for Broadcom Ethernet PHY driversFlorian Fainelli
Add an entry for the Broadcom Ethernet PHY drivers covering the BCM63xx, BCM7xxx, BCM87xx, BCM54140, BCM84881, the venerable broadcom.c driver and the companion library files. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24MAINTAINERS: GENET: Add UniMAC MDIO controller filesFlorian Fainelli
In preparation for removing myself from the PHYLIB entry, add the UniMAC MDIO controller files (DT binding, driver and platform_data header) to the GENET entry. The UniMAC MDIO controller is essential to the GENET operation, therefore it makes sense to group them together. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24MAINTAINERS: GENET: Add DT binding fileFlorian Fainelli
When the DT binding was added in aab5127d94e6 ("Documentation: add Device tree bindings for Broadcom GENET"), the file was not explicitly listed under the GENET MAINTAINERS section, do that now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24MAINTAINERS: B53: Add DT binding fileFlorian Fainelli
When the binding was added with 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch"), it was not explicitly added to the B53 MAINTAINERS file section, add it now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24MAINTAINERS: GENET: Add missing platform data fileFlorian Fainelli
When commit b0ba512e25d7 ("net: bcmgenet: enable driver to work without a device tree") added include/linux/platform_data/bcmgenet.h, the file was not added to the GENET MAINTAINERS file section, add it now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: dsa: sja1105: Do not use address of compatible member in ↵Nathan Chancellor
sja1105_check_device_id Clang warns: drivers/net/dsa/sja1105/sja1105_main.c:3418:38: warning: address of array 'match->compatible' will always evaluate to 'true' [-Wpointer-bool-conversion] for (match = sja1105_dt_ids; match->compatible; match++) { ~~~ ~~~~~~~^~~~~~~~~~ 1 warning generated. We should check the value of the first character in compatible to see if it is empty or not. This matches how the rest of the tree iterates over IDs. Fixes: 0b0e299720bb ("net: dsa: sja1105: use detected device id instead of DT one on mismatch") Link: https://github.com/ClangBuiltLinux/linux/issues/1139 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: Get rid of consume_skb when tracing is offHerbert Xu
The function consume_skb is only meaningful when tracing is enabled. This patch makes it conditional on CONFIG_TRACEPOINTS. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24drivers/net/wan/lapbether: Added needed_tailroomXie He
The underlying Ethernet device may request necessary tailroom to be allocated by setting needed_tailroom. This driver should also set needed_tailroom to request the tailroom needed by the underlying Ethernet device to be allocated. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24netlabel: fix problems with mapping removalPaul Moore
This patch fixes two main problems seen when removing NetLabel mappings: memory leaks and potentially extra audit noise. The memory leaks are caused by not properly free'ing the mapping's address selector struct when free'ing the entire entry as well as not properly cleaning up a temporary mapping entry when adding new address selectors to an existing entry. This patch fixes both these problems such that kmemleak reports no NetLabel associated leaks after running the SELinux test suite. The potentially extra audit noise was caused by the auditing code in netlbl_domhsh_remove_entry() being called regardless of the entry's validity. If another thread had already marked the entry as invalid, but not removed/free'd it from the list of mappings, then it was possible that an additional mapping removal audit record would be generated. This patch fixes this by returning early from the removal function when the entry was previously marked invalid. This change also had the side benefit of improving the code by decreasing the indentation level of large chunk of code by one (accounting for most of the diffstat). Fixes: 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping") Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24sctp: not disable bh in the whole sctp_get_port_local()Xin Long
With disabling bh in the whole sctp_get_port_local(), when snum == 0 and too many ports have been used, the do-while loop will take the cpu for a long time and cause cpu stuck: [ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s! [ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940 [ ] Call Trace: [ ] _raw_spin_lock+0xc1/0xd0 [ ] sctp_get_port_local+0x527/0x650 [sctp] [ ] sctp_do_bind+0x208/0x5e0 [sctp] [ ] sctp_autobind+0x165/0x1e0 [sctp] [ ] sctp_connect_new_asoc+0x355/0x480 [sctp] [ ] __sctp_connect+0x360/0xb10 [sctp] There's no need to disable bh in the whole function of sctp_get_port_local. So fix this cpu stuck by removing local_bh_disable() called at the beginning, and using spin_lock_bh() instead. The same thing was actually done for inet_csk_get_port() in Commit ea8add2b1903 ("tcp/dccp: better use of ephemeral ports in bind()"). Thanks to Marcelo for pointing the buggy code out. v1->v2: - use cond_resched() to yield cpu to other tasks if needed, as Eric noticed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24ravb: Fixed to be able to unload modulesYuusuke Ashizuka
When this driver is built as a module, I cannot rmmod it after insmoding it. This is because that this driver calls ravb_mdio_init() at the time of probe, and module->refcnt is incremented by alloc_mdio_bitbang() called after that. Therefore, even if ifup is not performed, the driver is in use and rmmod cannot be performed. $ lsmod Module Size Used by ravb 40960 1 $ rmmod ravb rmmod: ERROR: Module ravb is in use Call ravb_mdio_init() at open and free_mdio_bitbang() at close, thereby rmmod is possible in the ifdown state. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yuusuke Ashizuka <ashiduka@fujitsu.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24ipv6: ndisc: adjust ndisc_ifinfo_sysctl_change prototypeTobias Klauser
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ndisc_ifinfo_sysctl_change to take a kernel pointer. Adjust its prototype in net/ndisc.h as well to fix the following sparse warning: net/ipv6/ndisc.c:1838:5: error: symbol 'ndisc_ifinfo_sysctl_change' redeclared with different type (incompatible argument 3 (different address spaces)): net/ipv6/ndisc.c:1838:5: int extern [addressable] [signed] [toplevel] ndisc_ifinfo_sysctl_change( ... ) net/ipv6/ndisc.c: note: in included file (through include/net/ipv6.h): ./include/net/ndisc.h:496:5: note: previously declared as: ./include/net/ndisc.h:496:5: int extern [addressable] [signed] [toplevel] ndisc_ifinfo_sysctl_change( ... ) net/ipv6/ndisc.c: note: in included file (through include/net/ip6_route.h): Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Don't flag SCTP heartbeat as invalid for re-used connections, from Florian Westphal. 2) Bogus overlap report due to rbtree tree rotations, from Stefano Brivio. 3) Detect partial overlap with start end point match, also from Stefano. 4) Skip netlink dump of NFTA_SET_USERDATA is unset. 5) Incorrect nft_list_attributes enumeration definition. 6) Missing zeroing before memcpy to destination register, also from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: systemport: Fix memleak in bcm_sysport_probeDinghao Liu
When devm_kcalloc() fails, dev should be freed just like what we've done in the subsequent error paths. Fixes: 7b78be48a8eb6 ("net: systemport: Dynamically allocate number of TX rings") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-16 10:36:35 +0000