summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-07selftests/bpf: Validate libbpf's auto-sizing of LD/ST/STX instructionsAndrii Nakryiko
Add selftests validating libbpf's auto-resizing of load/store instructions when used with CO-RE relocations. An explicit and manual approach with using bpf_core_read() is also demonstrated and tested. Separate BPF program is supposed to fail due to using signed integers of sizes that differ from kernel's sizes. To reliably simulate 32-bit BTF (i.e., the one with sizeof(long) == sizeof(void *) == 4), selftest generates its own custom BTF and passes it as a replacement for real kernel BTF. This allows to test 32/64-bitness mix on all architectures. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201008001025.292064-5-andrii@kernel.org
2020-10-07libbpf: Allow specifying both ELF and raw BTF for CO-RE BTF overrideAndrii Nakryiko
Use generalized BTF parsing logic, making it possible to parse BTF both from ELF file, as well as a raw BTF dump. This makes it easier to write custom tests with manually generated BTFs. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201008001025.292064-4-andrii@kernel.org
2020-10-07libbpf: Support safe subset of load/store instruction resizing with CO-REAndrii Nakryiko
Add support for patching instructions of the following form: - rX = *(T *)(rY + <off>); - *(T *)(rX + <off>) = rY; - *(T *)(rX + <off>) = <imm>, where T is one of {u8, u16, u32, u64}. For such instructions, if the actual kernel field recorded in CO-RE relocation has a different size than the one recorded locally (e.g., from vmlinux.h), then libbpf will adjust T to an appropriate 1-, 2-, 4-, or 8-byte loads. In general, such transformation is not always correct and could lead to invalid final value being loaded or stored. But two classes of cases are always safe: - if both local and target (kernel) types are unsigned integers, but of different sizes, then it's OK to adjust load/store instruction according to the necessary memory size. Zero-extending nature of such instructions and unsignedness make sure that the final value is always correct; - pointer size mismatch between BPF target architecture (which is always 64-bit) and 32-bit host kernel architecture can be similarly resolved automatically, because pointer is essentially an unsigned integer. Loading 32-bit pointer into 64-bit BPF register with zero extension will leave correct pointer in the register. Both cases are necessary to support CO-RE on 32-bit kernels, as `unsigned long` in vmlinux.h generated from 32-bit kernel is 32-bit, but when compiled with BPF program for BPF target it will be treated by compiler as 64-bit integer. Similarly, pointers in vmlinux.h are 32-bit for kernel, but treated as 64-bit values by compiler for BPF target. Both problems are now resolved by libbpf for direct memory reads. But similar transformations are useful in general when kernel fields are "resized" from, e.g., unsigned int to unsigned long (or vice versa). Now, similar transformations for signed integers are not safe to perform as they will result in incorrect sign extension of the value. If such situation is detected, libbpf will emit helpful message and will poison the instruction. Not failing immediately means that it's possible to guard the instruction based on kernel version (or other conditions) and make sure it's not reachable. If there is a need to read signed integers that change sizes between different kernels, it's possible to use BPF_CORE_READ_BITFIELD() macro, which works both with bitfields and non-bitfield integers of any signedness and handles sign-extension properly. Also, bpf_core_read() with proper size and/or use of bpf_core_field_size() relocation could allow to deal with such complicated situations explicitly, if not so conventiently as direct memory reads. Selftests added in a separate patch in progs/test_core_autosize.c demonstrate both direct memory and probed use cases. BPF_CORE_READ() is not changed and it won't deal with such situations as automatically as direct memory reads due to the signedness integer limitations, which are much harder to detect and control with compiler macro magic. So it's encouraged to utilize direct memory reads as much as possible. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201008001025.292064-3-andrii@kernel.org
2020-10-07libbpf: Skip CO-RE relocations for not loaded BPF programsAndrii Nakryiko
Bypass CO-RE relocations step for BPF programs that are not going to be loaded. This allows to have BPF programs compiled in and disabled dynamically if kernel is not supposed to provide enough relocation information. In such case, there won't be unnecessary warnings about failed relocations. Fixes: d929758101fc ("libbpf: Support disabling auto-loading BPF programs") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201008001025.292064-2-andrii@kernel.org
2020-10-07scsi: 53c700: Remove set but not used variableZheng Yongjun
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/53c700.c: In function NCR_700_intr: drivers/scsi/53c700.c:1488:27: warning: variable ‘state’ set but not used [-Wunused-but-set-variable] drivers/scsi/53c700.c: In function NCR_700_queuecommand_lck: drivers/scsi/53c700.c:1742:26: warning: variable ‘direction’ set but not used [-Wunused-but-set-variable] these variable is never used, so remove it. Link: https://lore.kernel.org/r/20200918071422.19566-1-zhengyongjun3@huawei.com Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: gdth: Make option_setup() staticJason Yan
Move the two functions around the '__setup' macro which uses them to avoid an 'unused-function' warning. This addresses the following sparse warning: drivers/scsi/gdth.c:3229:12: warning: symbol 'option_setup' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200918034920.3199926-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: initio: Use module_pci_driver() to simplify the codeLiu Shixin
Use the module_pci_driver() macro to make the code simpler by eliminating module_init() and module_exit() calls. Link: https://lore.kernel.org/r/20200917071045.1909320-1-liushixin2@huawei.com Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: dc395x: Use module_pci_driver() to simplify the codeLiu Shixin
Use the module_pci_driver() macro to make the code simpler by eliminating module_init() and module_exit() calls. Link: https://lore.kernel.org/r/20200917071044.1909268-1-liushixin2@huawei.com Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: core: Only start the request just before dispatchingChristoph Hellwig
This has no change in behavior, but improves the accounting a bit. Link: https://lore.kernel.org/r/20201005084130.143273-11-hch@lst.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: core: Remove scsi_setup_cmnd() and scsi_setup_fs_cmnd()Christoph Hellwig
Move this trivial functionality into scsi_prepare_cmd() instead of splitting it over multiple small functions, and update the comments to better document passthrough commands as the special case. Link: https://lore.kernel.org/r/20201005084130.143273-10-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: core: Clean up allocation and freeing of sgtablesChristoph Hellwig
Rename scsi_init_io() to scsi_alloc_sgtables(), and ensure callers call scsi_free_sgtables() to cleanup failures close to scsi_init_io() instead of leaking it down the generic I/O submission path. Link: https://lore.kernel.org/r/20201005084130.143273-9-hch@lst.de Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: core: Rename scsi_mq_prep_fn() to scsi_prepare_cmd()Christoph Hellwig
The old name is rather confusing now that the the legacy prep_fn is gone. Link: https://lore.kernel.org/r/20201005084130.143273-8-hch@lst.de Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: core: Rename scsi_prep_state_check() to scsi_device_state_check()Christoph Hellwig
The old name is rather confusing now that the the legacy prep_fn is gone. Link: https://lore.kernel.org/r/20201005084130.143273-7-hch@lst.de Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: core: Use rq_dma_dir in scsi_setup_cmnd()Christoph Hellwig
Link: https://lore.kernel.org/r/20201005084130.143273-6-hch@lst.de Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: core: Move command size detection out of the fast pathChristoph Hellwig
We only need to detect the command size for ioctl request from userspace, which is limited to the passthrough path. Move the check there instead of doing it for all queuecommand invocations. Link: https://lore.kernel.org/r/20201005084130.143273-4-hch@lst.de Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: core: Remove scsi_init_cmd_errhChristoph Hellwig
There is no good reason to keep this functionality as a separate function, just merge it into the only caller. Link: https://lore.kernel.org/r/20201005084130.143273-3-hch@lst.de Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07scsi: core: Don't export scsi_device_from_queue()Christoph Hellwig
This function is only used by code built into scsi_mod.ko. Link: https://lore.kernel.org/r/20201005084130.143273-2-hch@lst.de Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-07dm: fix request-based DM to not bounce through indirect dm_submit_bioMike Snitzer
It is unnecessary to force request-based DM to call into bio-based dm_submit_bio (via indirect disk->fops->submit_bio) only to have it then call blk_mq_submit_bio(). Fix this by establishing a request-based DM block_device_operations (dm_rq_blk_dops, which doesn't have .submit_bio) and update dm_setup_md_queue() to set md->disk->fops to it for DM_TYPE_REQUEST_BASED. Remove DM_TYPE_REQUEST_BASED conditional in dm_submit_bio and unexport blk_mq_submit_bio. Fixes: c62b37d96b6eb ("block: move ->make_request_fn to struct block_device_operations") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-10-07dm: remove special-casing of bio-based immutable singleton target on NVMeMike Snitzer
Since commit 5a6c35f9af416 ("block: remove direct_make_request") there is no benefit to DM special-casing NVMe. Remove all code used to establish DM_TYPE_NVME_BIO_BASED. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-10-079P: Cast to loff_t before multiplyingMatthew Wilcox (Oracle)
On 32-bit systems, this multiplication will overflow for files larger than 4GB. Link: http://lkml.kernel.org/r/20201004180428.14494-2-willy@infradead.org Cc: stable@vger.kernel.org Fixes: fb89b45cdfdc ("9P: introduction of a new cache=mmap model.") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2020-10-07platform/x86: mlx-platform: Add capability field to platform FAN descriptionVadim Pasternak
Set 'capability' field to FAN core platform data.. The content of 'capability' register allows to set the mapping between the drawers and tachometers. The motivation is to avoid adding a new code in the future in order to distinct between the systems types supporting a different kinds of the FAN drawers. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200923172053.26296-6-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform_data/mlxreg: Extend core platform structureVadim Pasternak
Add 'capability' field to structure 'mlxreg_core_platform_data'. The purpose of this filed to indicate the actual number of the components within the particular group. Such components could be, for example the number of the FAN drawers. Some systems are equipped with FAN drawers with one tachometer inside, others with FAN drawers with several tachometers inside. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200923172053.26296-5-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform_data/mlxreg: Update module licenseVadim Pasternak
Update license to SPDX-License. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200923172053.26296-4-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: mlx-platform: Remove PSU EEPROM configurationVadim Pasternak
Remove PSU EEPROM configuration for systems class equipped with Mellanox chip Spectrume-2. Till now all the systems from this class used few types of power units, all equipped with EEPROM device with address space two bytes. Thus, all these devices have been handled by EEPROM driver "24c32". There is a new requirement is to support power unit replacement by "off the shelf" device, matching electrical required parameters. Such device could be equipped with different EEPROM type, which could be one byte address space addressing or even could be not equipped with EEPROM. In such case "24c32" will not work. Fixes: 1bd42d94ccab ("platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200923172053.26296-2-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07can: xilinx_can: Fix incorrect variable and initialize with a default valueSrinivas Neeli
Some variables with incorrect type were passed to "of_property_read_u32" API, "of_property_read_u32" API was expecting an "u32 *" but the formal parameter that was passed was of type "int *". Fixed the issue by changing the variable types from "int" to "u32" and initialized with a default value. Fixed sparse warning. Addresses-Coverity: "incompatible_param" Addresses-Coverity: "UNINIT(Using uninitialized value)" Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/0651544d22f3c25893ca9d445b14823f0dfddfc8.1600073396.git.michal.simek@xilinx.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07can: xilinx_can: Check return value of set_reset_modeSrinivas Neeli
Check return value of set_reset_mode() for error. Addresses-Coverity: "check_return" Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/bac2c2b857986472a11db341b3f6f7a8905ad0dd.1600073396.git.michal.simek@xilinx.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07can: xilinx_can: Limit CANFD brp to 2Srinivas Neeli
Bit enlarging is observed for CANFD2.0 when brp is 1, So change brp_min value to 2. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/bca871d7f3ca9c653d50e63c5b60028f2bdf3fb0.1600073396.git.michal.simek@xilinx.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07can: flexcan: remove ack_grp and ack_bit handling from driverMarc Kleine-Budde
Since commit: 048e3a34a2e7 can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment the driver polls the IP core's internal bit MCR[LPM_ACK] as stop mode acknowledge and not the acknowledgment on chip level. This means the 4th and 5th value of the property "fsl,stop-mode" isn't used anymore. This patch removes the used "ack_gpr" and "ack_bit" from the driver. Link: http://lore.kernel.org/r/20201006203748.1750156-15-mkl@pengutronix.de Fixes: 048e3a34a2e7 ("can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment") Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07dt-bindings: can: flexcan: remove ack_grp and ack_bit from fsl,stop-modeMarc Kleine-Budde
Since commit: 048e3a34a2e7 can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment the driver polls the IP core's internal bit MCR[LPM_ACK] as stop mode acknowledge and not the acknowledgment on chip level. This means the 4th and 5th value of the property "fsl,stop-mode" isn't used anymore. It will be removed from the driver in the next patch, so remove it from the binding documentation. Link: http://lore.kernel.org/r/20201006203748.1750156-14-mkl@pengutronix.de Fixes: 048e3a34a2e7 ("can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment") Cc: devicetree <devicetree@vger.kernel.org> Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07dt-bindings: can: flexcan: list supported processorsMichael Walle
The compatible is a pattern match. Explicitly list all possible values. Also mention that the ls1028ar1 must be followed by lx2160ar1. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20201001091131.30514-2-michael@walle.cc Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07dt-bindings: can: rcar_can: Document r8a774e1 supportLad Prabhakar
Document SoC specific bindings for RZ/G2H (R8A774E1) SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201005081319.29322-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07dt-bindings: can: rcar_canfd: Document r8a774e1 supportLad Prabhakar
Document the support for rcar_canfd on R8A774E1 SoC devices. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201005081319.29322-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07dt-bindings: can: rcar_can: Add r8a7742 supportLad Prabhakar
Document RZ/G1H (r8a7742) SoC specific bindings. The R8A7742 CAN module is identical to R-Car Gen2 family. No driver change is needed due to the fallback compatible value "renesas,rcar-gen2-can". Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200816190732.6905-3-prabhakar.mahadev-lad.rj@bp.renesas.com Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07can: add ISO 15765-2:2016 transport protocolOliver Hartkopp
CAN Transport Protocols offer support for segmented Point-to-Point communication between CAN nodes via two defined CAN Identifiers. As CAN frames can only transport a small amount of data bytes (max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this segmentation is needed to transport longer PDUs as needed e.g. for vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic. This protocol driver implements data transfers according to ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20200928200404.82229-1-socketcan@hartkopp.net [mkl: Removed "WITH Linux-syscall-note" from isotp.c. Fixed indention, a checkpatch warning and typos. Replaced __u{8,32} by u{8,32}. Removed always false (optlen < 0) check in isotp_setsockopt().] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07can: dev: add a helper function to calculate the duration of one bitVincent Mailhol
Rename macro CAN_CALC_SYNC_SEG to CAN_SYNC_SEG and make it available through include/linux/can/dev.h Add an helper function can_bit_time() which returns the duration (in time quanta) of one CAN bit. Rationale for this patch: the sync segment and the bit time are two concepts which are defined in the CAN ISO standard. Device drivers for CAN might need those. Please refer to ISO 11898-1:2015, section 11.3.1.1 "Bit time" for additional information. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20201002154219.4887-6-mailhol.vincent@wanadoo.fr [mkl: Let can_bit_time() return an unsinged int, make argument const] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-10-07MAINTAINERS: Update maintainers for pmc_core driverGayatri Kammela
Update MAINTAINERS file for pmc_core driver to reflect the current maintainers. Cc: Vishwanath Somayaji <vishwanath.somayaji@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: David E. Box <david.e.box@linux.intel.com> Acked-by: David E. Box <david.e.box@linux.intel.com> Acked-by: Vishwanath Somayaji <vishwanath.somayaji@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20201007035108.31078-5-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: intel_pmc_core: fix: Replace dev_dbg macro with dev_info()Gayatri Kammela
dev_dbg macro is used to dump the debug registers in resume from an S0ix failure. However, when CONFIG_DYNAMIC_DEBUG is not set, the user may not be able to find the debug dump on an S0ix failure which defeats the purpose. The output of these messages is already controlled by a module parameter, warn_on_s0ix_failures, making it a 2 step process to enable anyway when CONFIG_DYNAMIC_DEBUG is set. Hence, replace dev_dbg with dev_info, allowing the control of the messages solely through the module parameter which is N by default. Fixes commit 913f984a8347 ("platform/x86: intel_pmc_core: Add an additional parameter to pmc_core_lpm_display()") Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20201007035108.31078-4-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: intel_pmc_core: Add Intel RocketLake (RKL) supportGayatri Kammela
Add RocketLake to the list of the platforms that intel_pmc_core driver supports for pmc_core device. RocketLake reuses all the TigerLake PCH IPs. Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David E. Box <david.e.box@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Rui Zhang <rui.zhang@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20201007035108.31078-3-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: intel_pmc_core: Clean up: Remove the duplicate comments and ↵Gayatri Kammela
reorganize Some of the Cannon Lake PCH IPs are reused by most of the platforms such as Ice Lake, Tiger Lake, Elkhart Lake, Jasper Lake and can be reused by future platforms as well. The same was mentioned via comments not once but twice in an array of bit map structs for Cannon Lake (cnp_pfear_map). Hence, remove the duplicate comments and reorganize them. Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David E. Box <david.e.box@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Rui Zhang <rui.zhang@intel.com> Suggested-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20201007035108.31078-2-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: intel_pmc_core: Fix the slp_s0 counter displayed valueGayatri Kammela
slp_s0 counter value displayed via debugfs interface is calculated by multiplying the granularity for crystal oscillator tick as 100us with the value read from using slp_s0 offset. But the granularity of the tick varies from platform to platform and it needs to be fixed. Hence, specify granularity of the tick for each platform, so that the value of the slp_s0 counter is accurate. Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201006224702.12697-4-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: intel_pmc_core: Fix TigerLake power gating status mapGayatri Kammela
TigerLake's LPM power gating status register has errors in the bit-to-name mapping as well as with the marked reserved bits according to the actual implementation. Hence, update the right bit-to-name mapping and the reserved bits in accordance with actual implementation. Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David E. Box <david.e.box@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201006224702.12697-3-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07platform/x86: pmc_core: Use descriptive names for LPM registersDavid E. Box
TigerLake Lower Power Mode (LPM) registers are grouped by functionality but were given simple enumerated names in the code (lpm0, lpm1, ...). Instead, give the register blocks names that describe their usage. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201006224702.12697-2-david.e.box@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07drm/amdgpu/swsmu: fix ARC build errorsAlex Deucher
We want to use the dev_* functions here rather than the pr_* variants. Switch to using dev_warn() which mirrors what we do on other asics. Fixes the following build errors on ARC: ../drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c: In function 'navi10_fill_i2c_req': ../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration] ../drivers/gpu/drm/amd/amdgpu/../powerplay/sienna_cichlid_ppt.c: In function 'sienna_cichlid_fill_i2c_req': ../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Evan Quan <evan.quan@amd.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-07drm/amdgpu: fix NULL pointer dereference for RenoirDirk Gouders
Commit c1cf79ca5ced46 ("drm/amdgpu: use IP discovery table for renoir") introduced a NULL pointer dereference when booting with amdgpu.discovery=0, because it removed the call of vega10_reg_base_init() for that case. Fix this by calling that funcion if amdgpu_discovery == 0 in addition to the case that amdgpu_discovery_reg_base_init() failed. Fixes: c1cf79ca5ced46 ("drm/amdgpu: use IP discovery table for renoir") Signed-off-by: Dirk Gouders <dirk@gouders.net> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-07tools/power/x86/intel-speed-select: Update version for v5.10Srinivas Pandruvada
Update version for changes released with v5.10 kernel release. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07tools/power/x86/intel-speed-select: Fix missing base-freq core IDsJonathan Doman
The reported base-freq high-priority-cpu-list was potentially omitting some cpus, due to incorrectly using a logical core count to constrain the size of a physical punit core ID mask. We may need to read both high and low PBF CORE_MASK values regardless of the logical core count. Signed-off-by: Jonathan Doman <jonathan.doman@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07libbpf: Fix compatibility problem in xsk_socket__createMagnus Karlsson
Fix a compatibility problem when the old XDP_SHARED_UMEM mode is used together with the xsk_socket__create() call. In the old XDP_SHARED_UMEM mode, only sharing of the same device and queue id was allowed, and in this mode, the fill ring and completion ring were shared between the AF_XDP sockets. Therefore, it was perfectly fine to call the xsk_socket__create() API for each socket and not use the new xsk_socket__create_shared() API. This behavior was ruined by the commit introducing XDP_SHARED_UMEM support between different devices and/or queue ids. This patch restores the ability to use xsk_socket__create in these circumstances so that backward compatibility is not broken. Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/1602070946-11154-1-git-send-email-magnus.karlsson@gmail.com
2020-10-07vfio: Introduce capability definitions for VFIO_DEVICE_GET_INFOMatthew Rosato
Allow the VFIO_DEVICE_GET_INFO ioctl to include a capability chain. Add a flag indicating capability chain support, and introduce the definitions for the first set of capabilities which are specified to s390 zPCI devices. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-07s390/pci: track whether util_str is valid in the zpci_devMatthew Rosato
We'll need to keep track of whether or not the byte string in util_str is valid and thus needs to be passed to a vfio-pci passthrough device. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-07s390/pci: stash version in the zpci_devMatthew Rosato
In preparation for passing the info on to vfio-pci devices, stash the supported PCI version for the target device in the zpci_dev. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-21 23:09:34 +0000