summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-25block: move block layer internals out of include/linux/genhd.hChristoph Hellwig
None of this needs to be exposed to drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: move guard_bio_eod to bio.cChristoph Hellwig
This is bio layer functionality and not related to buffer heads. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: unexport get_gendiskChristoph Hellwig
get_gendisk is not used by any modular code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: unexport disk_map_sector_rcuChristoph Hellwig
disk_map_sector_rcu is not used by any modular code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: unexport disk_get_partChristoph Hellwig
disk_get_part is not used by any modular code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: mark part_in_flight and part_in_flight_rw staticChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: mark block_depr staticChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: factor out requeue handling from dispatch codeJohannes Thumshirn
Factor out the requeue handling from the dispatch code, this will make subsequent addition of different requeueing schemes easier. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25btrfs: fix missing semaphore unlock in btrfs_sync_fileRobbie Ko
Ordered ops are started twice in sync file, once outside of inode mutex and once inside, taking the dio semaphore. There was one error path missing the semaphore unlock. Fixes: aab15e8ec2576 ("Btrfs: fix rare chances for data loss when doing a fast fsync") CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Robbie Ko <robbieko@synology.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> [ add changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-25btrfs: use nofs allocations for running delayed itemsJosef Bacik
Zygo reported the following lockdep splat while testing the balance patches ====================================================== WARNING: possible circular locking dependency detected 5.6.0-c6f0579d496a+ #53 Not tainted ------------------------------------------------------ kswapd0/1133 is trying to acquire lock: ffff888092f622c0 (&delayed_node->mutex){+.+.}, at: __btrfs_release_delayed_node+0x7c/0x5b0 but task is already holding lock: ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}: fs_reclaim_acquire.part.91+0x29/0x30 fs_reclaim_acquire+0x19/0x20 kmem_cache_alloc_trace+0x32/0x740 add_block_entry+0x45/0x260 btrfs_ref_tree_mod+0x6e2/0x8b0 btrfs_alloc_tree_block+0x789/0x880 alloc_tree_block_no_bg_flush+0xc6/0xf0 __btrfs_cow_block+0x270/0x940 btrfs_cow_block+0x1ba/0x3a0 btrfs_search_slot+0x999/0x1030 btrfs_insert_empty_items+0x81/0xe0 btrfs_insert_delayed_items+0x128/0x7d0 __btrfs_run_delayed_items+0xf4/0x2a0 btrfs_run_delayed_items+0x13/0x20 btrfs_commit_transaction+0x5cc/0x1390 insert_balance_item.isra.39+0x6b2/0x6e0 btrfs_balance+0x72d/0x18d0 btrfs_ioctl_balance+0x3de/0x4c0 btrfs_ioctl+0x30ab/0x44a0 ksys_ioctl+0xa1/0xe0 __x64_sys_ioctl+0x43/0x50 do_syscall_64+0x77/0x2c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&delayed_node->mutex){+.+.}: __lock_acquire+0x197e/0x2550 lock_acquire+0x103/0x220 __mutex_lock+0x13d/0xce0 mutex_lock_nested+0x1b/0x20 __btrfs_release_delayed_node+0x7c/0x5b0 btrfs_remove_delayed_node+0x49/0x50 btrfs_evict_inode+0x6fc/0x900 evict+0x19a/0x2c0 dispose_list+0xa0/0xe0 prune_icache_sb+0xbd/0xf0 super_cache_scan+0x1b5/0x250 do_shrink_slab+0x1f6/0x530 shrink_slab+0x32e/0x410 shrink_node+0x2a5/0xba0 balance_pgdat+0x4bd/0x8a0 kswapd+0x35a/0x800 kthread+0x1e9/0x210 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&delayed_node->mutex); lock(fs_reclaim); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by kswapd0/1133: #0: ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 #1: ffffffff8fc380d8 (shrinker_rwsem){++++}, at: shrink_slab+0x1e8/0x410 #2: ffff8881e0e6c0e8 (&type->s_umount_key#42){++++}, at: trylock_super+0x1b/0x70 stack backtrace: CPU: 2 PID: 1133 Comm: kswapd0 Not tainted 5.6.0-c6f0579d496a+ #53 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: dump_stack+0xc1/0x11a print_circular_bug.isra.38.cold.57+0x145/0x14a check_noncircular+0x2a9/0x2f0 ? print_circular_bug.isra.38+0x130/0x130 ? stack_trace_consume_entry+0x90/0x90 ? save_trace+0x3cc/0x420 __lock_acquire+0x197e/0x2550 ? btrfs_inode_clear_file_extent_range+0x9b/0xb0 ? register_lock_class+0x960/0x960 lock_acquire+0x103/0x220 ? __btrfs_release_delayed_node+0x7c/0x5b0 __mutex_lock+0x13d/0xce0 ? __btrfs_release_delayed_node+0x7c/0x5b0 ? __asan_loadN+0xf/0x20 ? pvclock_clocksource_read+0xeb/0x190 ? __btrfs_release_delayed_node+0x7c/0x5b0 ? mutex_lock_io_nested+0xc20/0xc20 ? __kasan_check_read+0x11/0x20 ? check_chain_key+0x1e6/0x2e0 mutex_lock_nested+0x1b/0x20 ? mutex_lock_nested+0x1b/0x20 __btrfs_release_delayed_node+0x7c/0x5b0 btrfs_remove_delayed_node+0x49/0x50 btrfs_evict_inode+0x6fc/0x900 ? btrfs_setattr+0x840/0x840 ? do_raw_spin_unlock+0xa8/0x140 evict+0x19a/0x2c0 dispose_list+0xa0/0xe0 prune_icache_sb+0xbd/0xf0 ? invalidate_inodes+0x310/0x310 super_cache_scan+0x1b5/0x250 do_shrink_slab+0x1f6/0x530 shrink_slab+0x32e/0x410 ? do_shrink_slab+0x530/0x530 ? do_shrink_slab+0x530/0x530 ? __kasan_check_read+0x11/0x20 ? mem_cgroup_protected+0x13d/0x260 shrink_node+0x2a5/0xba0 balance_pgdat+0x4bd/0x8a0 ? mem_cgroup_shrink_node+0x490/0x490 ? _raw_spin_unlock_irq+0x27/0x40 ? finish_task_switch+0xce/0x390 ? rcu_read_lock_bh_held+0xb0/0xb0 kswapd+0x35a/0x800 ? _raw_spin_unlock_irqrestore+0x4c/0x60 ? balance_pgdat+0x8a0/0x8a0 ? finish_wait+0x110/0x110 ? __kasan_check_read+0x11/0x20 ? __kthread_parkme+0xc6/0xe0 ? balance_pgdat+0x8a0/0x8a0 kthread+0x1e9/0x210 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x50 This is because we hold that delayed node's mutex while doing tree operations. Fix this by just wrapping the searches in nofs. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-25MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=nYousong Zhou
This furthers what commit 42b10815d559 ("MIPS: Don't compile math-emu when CONFIG_MIPS_FP_SUPPORT=n") has done Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-25MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3Huacai Chen
LDDIR/LDPTE is Loongson-3's acceleration for Page Table Walking. If BD (Base Directory, the 4th page directory) is not enabled, then GDOffset is biased by BadVAddr[63:62]. So, if GDOffset (aka. BadVAddr[47:36] for Loongson-3) is big enough, "0b11(BadVAddr[63:62])|BadVAddr[47:36]|...." can far beyond pg_swapper_dir. This means the pg_swapper_dir may NOT be accessed by LDDIR correctly, so fix it by set PWDirExt in CP0_PWCtl. Cc: <stable@vger.kernel.org> Signed-off-by: Pei Huang <huangpei@loongson.cn> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-25MIPS: do not compile generic functions for CONFIG_CAVIUM_OCTEON_SOCMasahiro Yamada
MIPS provides multiple definitions for the following functions: fw_init_cmdline __delay __udelay __ndelay memmove __rmemcpy memcpy __copy_user The generic ones are defined in lib-y objects, which are overridden by the Octeon ones when CONFIG_CAVIUM_OCTEON_SOC is enabled. The use of EXPORT_SYMBOL in static libraries potentially causes a problem for the llvm linker [1]. So, I want to forcibly link lib-y objects to vmlinux when CONFIG_MODULES=y. As a groundwork, we must fix multiple definitions that have previously been hidden by lib-y. If you look at lib/string.c, arch can define __HAVE_ARCH_* to opt out the generic implementation. Similarly, this commit adds CONFIG_HAVE_PLAT_* to allow a platform to opt out the MIPS generic code. [1]: https://github.com/ClangBuiltLinux/linux/issues/515 Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-25MAINTAINERS: Update Loongson64 entryJiaxun Yang
To include newly added irqchip drivers. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-25MIPS: Loongson64: Load built-in dtbsJiaxun Yang
Load proper dtb according to firmware passed parameters and CPU PRID. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-25MIPS: Loongson64: Add generic dtsJiaxun Yang
Add generic device dts for Loongson-3 devices. They are currently almost identical but will be different later. Some PCH devices like PCI Host Bridge is still enabled by platform code for now. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-25dt-bindings: mips: Add loongson boardsJiaxun Yang
Prepare for later dts. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Rob Herring <robh@kernel.org> Co-developed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-25MIPS: Loongson64: Drop legacy IRQ codeJiaxun Yang
We've made generic irqchip drivers for Loongson-3 platform, it's time to say goodbye to these legacy code. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-03-25block/diskstats: replace time_in_queue with sum of request timesKonstantin Khlebnikov
Column "time_in_queue" in diskstats is supposed to show total waiting time of all requests. I.e. value should be equal to the sum of times from other columns. But this is not true, because column "time_in_queue" is counted separately in jiffies rather than in nanoseconds as other times. This patch removes redundant counter for "time_in_queue" and shows total time of read, write, discard and flush requests. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block/diskstats: accumulate all per-cpu counters in one passKonstantin Khlebnikov
Reading /proc/diskstats iterates over all cpus for summing each field. It's faster to sum all fields in one pass. Hammering /proc/diskstats with fio shows 2x performance improvement: fio --name=test --numjobs=$JOBS --filename=/proc/diskstats \ --size=1k --bs=1k --fallocate=none --create_on_open=1 \ --time_based=1 --runtime=10 --invalidate=0 --group_report JOBS=1 JOBS=10 Before: 7k iops 64k iops After: 18k iops 120k iops Also this way code is more compact: add/remove: 1/0 grow/shrink: 0/2 up/down: 194/-1540 (-1346) Function old new delta part_stat_read_all - 194 +194 diskstats_show 1344 631 -713 part_stat_show 1219 392 -827 Total: Before=14966947, After=14965601, chg -0.01% Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block/diskstats: more accurate approximation of io_ticks for slow disksKonstantin Khlebnikov
Currently io_ticks is approximated by adding one at each start and end of requests if jiffies counter has changed. This works perfectly for requests shorter than a jiffy or if one of requests starts/ends at each jiffy. If disk executes just one request at a time and they are longer than two jiffies then only first and last jiffies will be accounted. Fix is simple: at the end of request add up into io_ticks jiffies passed since last update rather than just one jiffy. Example: common HDD executes random read 4k requests around 12ms. fio --name=test --filename=/dev/sdb --rw=randread --direct=1 --runtime=30 & iostat -x 10 sdb Note changes of iostat's "%util" 8,43% -> 99,99% before/after patch: Before: Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sdb 0,00 0,00 82,60 0,00 330,40 0,00 8,00 0,96 12,09 12,09 0,00 1,02 8,43 After: Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sdb 0,00 0,00 82,50 0,00 330,00 0,00 8,00 1,00 12,10 12,10 0,00 12,12 99,99 Now io_ticks does not loose time between start and end of requests, but for queue-depth > 1 some I/O time between adjacent starts might be lost. For load estimation "%util" is not as useful as average queue length, but it clearly shows how often disk queue is completely empty. Fixes: 5b18b5a73760 ("block: delete part_round_stats and switch to less precise counting") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25Merge branch 'x86/cpu' into perf/core, to resolve conflictIngo Molnar
Conflicts: arch/x86/events/intel/uncore.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-25soc: samsung: chipid: Fix return value on non-Exynos platformsMarek Szyprowski
Correct the probe return value to -ENODEV on non-Exynos platforms. Link: https://lore.kernel.org/r/20200316175652.5604-4-krzk@kernel.org Fixes: 02fb29882d5c ("soc: samsung: chipid: Drop "syscon" compatible requirement") Cc: <stable@vger.kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'tee-amdtee-fix2-for-5.6' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes tee: amdtee: out of bounds read in find_session() * tag 'tee-amdtee-fix2-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: amdtee: out of bounds read in find_session() Link: https://lore.kernel.org/r/20200320063446.GA9892@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'oxnas-arm-soc-dt-fixes-for-5.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas into arm/fixes - interrupt controller mask init fix to avoid spurious irq after soft reset * tag 'oxnas-arm-soc-dt-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas: ARM: dts: oxnas: Fix clear-mask property Link: https://lore.kernel.org/r/1cc83d6b-78de-9160-59bf-77cfe726a365@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'arm-soc/for-5.6/devicetree-fixes-part2' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.6, please pull the following: - Nick fixes the missing pinctrl-names property for the Raspberry Pi Zero Wireless DTS - Nicolas fixes the VC4 firmware node dma-range property which does not have the limitations of the soc's bus node * tag 'arm-soc/for-5.6/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations ARM: bcm2835-rpi-zero-w: Add missing pinctrl name Link: https://lore.kernel.org/r/20200323025246.22713-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25arm64: dts: Fix leftover entry-methods for PSCILinus Walleij
These two device trees were either missed or added after the commit correcting the "entry-method" from "arm,psci" to just "psci" as per the binding. Link: https://lore.kernel.org/r/20200322115846.16265-1-linus.walleij@linaro.org Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.6/fixes-rc6-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few more fixes for omaps Just few dts fixes: - A fix droid4 touchscreen stopping working with lost gpio interrupts - Also limit omap5 dma range similar to what we've recently done for dra7 * tag 'omap-for-v5.6/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: dts: N900: fix onenand timings ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode Link: https://lore.kernel.org/r/pull-1584575254-461940@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25ARM: dts: exynos: Fix regulator node aliasing on Midas-based boardsMarek Szyprowski
Commit d4ec0cb05064 ("ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas family") added a new fixed regulator ("voltage-regulator-6") to base "midas" .dtsi, but it didn't update the clients of that .dtsi, which define their own fixed regulators starting from the "voltage-regulator-6". This results in aliasing of the regulator dt nodes and breaks operation of OLED panel due to lack of power supply. Fix this by increasing the numbers in the fixed regulator names for those boards. Link: https://lore.kernel.org/r/20200316173710.3144-1-krzk@kernel.org Fixes: d4ec0cb05064 ("ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas family") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'imx-fixes-5.6-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.6, round 2: - Fix minimum voltage setting of vdd_arm and vdd_soc on i.MX6 phycore-som board. * tag 'imx-fixes-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage Link: https://lore.kernel.org/r/20200316032555.GD17221@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25RDMA/mlx5: Block delay drop to unprivileged usersMaor Gottlieb
It has been discovered that this feature can globally block the RX port, so it should be allowed for highly privileged users only. Fixes: 03404e8ae652("IB/mlx5: Add support to dropless RQ") Link: https://lore.kernel.org/r/20200322124906.1173790-1-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-25staging: hp100: Add spaces in if statement.Soumyajit Deb
Add space between if and open parenthesis to improve code readability and to adhere to the standard linux kernel coding style. Also, shift the next line to the right by a single space as it is the continuation of the above if statement. Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325122752.38600-1-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: hp100: Add space between while keyword and open parenthesisSoumyajit Deb
Add space between while keyword and open parenthesis "(" in the do while statement to improve code readability and to adhere to the Linux Kernel coding style. Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325115956.37126-1-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Merge tag 'sunxi-fixes-for-5.6-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for 5.6 - part 2 This follows up on the previous 5.6 fixes tag with a fix for the A33 Security System (crypto offloading hardware). The hardware was found to not be compatible with existing hardware and a new compatible was needed. The driver change was picked up right before the previous -rc6 and the DT bindings and DT changes were not picked up. The goal is to have all the changes in the same release, that is v5.6. * tag 'sunxi-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a33: add the new SS compatible dt-bindings: crypto: add new compatible for A33 SS Link: https://lore.kernel.org/r/20200313060727.GA23962@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25staging: hp100: Remove space after opening parenthesis "("Soumyajit Deb
Remove space after opening parenthesis in if statement to improve code readability and to adhere to the standard coding style. Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325072905.29066-7-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: hp100: Add space after "," in function arguments.Soumyajit Deb
Add space after "," in function arguments to improve code readability. Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325072905.29066-6-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: hp100: Correct typo in the commentSoumyajit Deb
Correct typo in the comment by changing "overriden" to "overridden". Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325072905.29066-4-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Merge tag 'sunxi-fixes-for-5.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for v5.6 A pretty normal set of fixes for v5.6: - Fix reversed macros used for A83T EMAC clock and reset - Fix camera regulator voltage and USB OTG for TBS-A711 - 16-bit / 8-bit mixed read fix for our RSB driver - Fix SPI controller base address for R40 - Reorder device nodes based on base address for R40 * tag 'sunxi-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: r40: Move SPI device nodes based on address order ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 ARM: dts: sun8i: r40: Move AHCI device node based on address order bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads ARM: dts: sun8i-a83t-tbs-a711: Fix USB OTG mode detection ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage ARM: dts: sun8i: a83t: Fix incorrect clk and reset macros for EMAC device Link: https://lore.kernel.org/r/20200313055233.GA19649@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25staging: hp100: Remove extra blank linesSoumyajit Deb
Remove extra blank lines from the code blocks. Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325035410.23802-1-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Merge tag 'soc-fsl-fix-v5.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes NXP/FSL soc driver fixes for v5.6 DPAA2 DPIO - Fix a kernel hang caused by irq requested before creating dpio * tag 'soc-fsl-fix-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: dpio: register dpio irq handlers after dpio create Link: https://lore.kernel.org/r/20200312202525.16708-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25staging: wlan-ng: fix ODEBUG bug in prism2sta_disconnect_usbQiujun Huang
We should cancel hw->usb_work before kfree(hw). Reported-by: syzbot+6d2e7f6fa90e27be9d62@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1585120006-30042-1-git-send-email-hqjagain@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: vt6655: Break up function call with long line.Briana Oursler
Update matches style found elsewhere in file. Issue found by checkpatch: line over 80 characters. Signed-off-by: Briana Oursler <briana.oursler@gmail.com> Link: https://lore.kernel.org/r/20200324183812.79411-1-briana.oursler@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25cpufreq/intel_pstate: Fix wrong macro conversionThomas Gleixner
The feature flag hwp_support_ids are supposed to match on is X86_FEATURE_HWP, not X86_FEATURE_APERFMPERF. Fix it. [ bp: Write commit message. ] Fixes: b11d77fa300d ("cpufreq: Convert to new X86 CPU match macros") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200324060124.GC11705@shao2-debian
2020-03-25cpu/hotplug: Hide cpu_up/down()Qais Yousef
Use separate functions for the device core to bring a CPU up and down. Users outside the device core must use add/remove_cpu() which will take care of extra housekeeping work like keeping sysfs in sync. Make cpu_up/down() static and replace the extra layer of indirection. [ tglx: Removed the extra wrapper functions and adjusted function names ] Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200323135110.30522-18-qais.yousef@arm.com
2020-03-25cpu/hotplug: Move bringup of secondary CPUs out of smp_init()Qais Yousef
This is the last direct user of cpu_up() before it can become an internal implementation detail of the cpu subsystem. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200323135110.30522-17-qais.yousef@arm.com
2020-03-25torture: Replace cpu_up/down() with add/remove_cpu()Qais Yousef
The core device API performs extra housekeeping bits that are missing from directly calling cpu_up/down(). See commit a6717c01ddc2 ("powerpc/rtas: use device model APIs and serialization during LPM") for an example description of what might go wrong. This also prepares to make cpu_up/down() a private interface of the CPU subsystem. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: "Paul E. McKenney" <paulmck@kernel.org> Link: https://lkml.kernel.org/r/20200323135110.30522-16-qais.yousef@arm.com
2020-03-25firmware: psci: Replace cpu_up/down() with add/remove_cpu()Qais Yousef
The core device API performs extra housekeeping bits that are missing from directly calling cpu_up/down(). See commit a6717c01ddc2 ("powerpc/rtas: use device model APIs and serialization during LPM") for an example description of what might go wrong. This also prepares to make cpu_up/down a private interface of the CPU subsystem. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lkml.kernel.org/r/20200323135110.30522-15-qais.yousef@arm.com
2020-03-25xen/cpuhotplug: Replace cpu_up/down() with device_online/offline()Qais Yousef
The core device API performs extra housekeeping bits that are missing from directly calling cpu_up/down(). See commit a6717c01ddc2 ("powerpc/rtas: use device model APIs and serialization during LPM") for an example description of what might go wrong. This also prepares to make cpu_up/down() a private interface of the cpu subsystem. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lkml.kernel.org/r/20200323135110.30522-14-qais.yousef@arm.com
2020-03-25parisc: Replace cpu_up/down() with add/remove_cpu()Qais Yousef
The core device API performs extra housekeeping bits that are missing from directly calling cpu_up/down(). See commit a6717c01ddc2 ("powerpc/rtas: use device model APIs and serialization during LPM") for an example description of what might go wrong. This also prepares to make cpu_up/down() a private interface of the CPU subsystem. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Helge Deller <deller@gmx.de> Link: https://lkml.kernel.org/r/20200323135110.30522-13-qais.yousef@arm.com
2020-03-25sparc: Replace cpu_up/down() with add/remove_cpu()Qais Yousef
The core device API performs extra housekeeping bits that are missing from directly calling cpu_up/down(). See commit a6717c01ddc2 ("powerpc/rtas: use device model APIs and serialization during LPM") for an example description of what might go wrong. This also prepares to make cpu_up/down() a private interface of the CPU subsystem. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> Link: https://lkml.kernel.org/r/20200323135110.30522-12-qais.yousef@arm.com
generated by cgit (git 2.34.1) at 2025-09-12 06:07:15 +0000