summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-11-25xprtrdma: Display async errorsChuck Lever
An async error upcall is a hard error, and should be reported in the system log. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25xprtrdma: Enable pad optimizationChuck Lever
The Linux NFS/RDMA server used to reject NFSv3 WRITE requests when pad optimization was enabled. That bug was fixed by commit e560e3b510d2 ("svcrdma: Add zero padding if the client doesn't send it"). We can now enable pad optimization on the client, which helps performance and is supported now by both Linux and Solaris servers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25xprtrdma: Re-write rpcrdma_flush_cqs()Chuck Lever
Currently rpcrdma_flush_cqs() attempts to avoid code duplication, and simply invokes rpcrdma_recvcq_upcall and rpcrdma_sendcq_upcall. 1. rpcrdma_flush_cqs() can run concurrently with provider upcalls. Both flush_cqs() and the upcalls were invoking ib_poll_cq() in different threads using the same wc buffers (ep->rep_recv_wcs and ep->rep_send_wcs), added by commit 1c00dd077654 ("xprtrmda: Reduce calls to ib_poll_cq() in completion handlers"). During transport disconnect processing, this sometimes resulted in the same reply getting added to the rpcrdma_tasklets_g list more than once, which corrupted the list. 2. The upcall functions drain only a limited number of CQEs, thanks to the poll budget added by commit 8301a2c047cc ("xprtrdma: Limit work done by completion handler"). Fixes: a7bc211ac926 ("xprtrdma: On disconnect, don't ignore ... ") BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=276 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25xprtrdma: Refactor tasklet schedulingChuck Lever
Restore the separate function that schedules the reply handling tasklet. I need to call it from two different paths. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25xprtrdma: unmap all FMRs during transport disconnectChuck Lever
When using RPCRDMA_MTHCAFMR memory registration, after a few transport disconnect / reconnect cycles, ib_map_phys_fmr() starts to return EINVAL because the provider has exhausted its map pool. Make sure that all FMRs are unmapped during transport disconnect, and that ->send_request remarshals them during an RPC retransmit. This resets the transport's MRs to ensure that none are leaked during a disconnect. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25xprtrdma: Cap req_cqinitChuck Lever
Recent work made FRMR registration and invalidation completions unsignaled. This greatly reduces the adapter interrupt rate. Every so often, however, a posted send Work Request is allowed to signal. Otherwise, the provider's Work Queue will wrap and the workload will hang. The number of Work Requests that are allowed to remain unsignaled is determined by the value of req_cqinit. Currently, this is set to the size of the send Work Queue divided by two, minus 1. For FRMR, the send Work Queue is the maximum number of concurrent RPCs (currently 32) times the maximum number of Work Requests an RPC might use (currently 7, though some adapters may need more). For mlx4, this is 224 entries. This leaves completion signaling disabled for 111 send Work Requests. Some providers hold back dispatching Work Requests until a CQE is generated. If completions are disabled, then no CQEs are generated for quite some time, and that can stall the Work Queue. I've seen this occur running xfstests generic/113 over NFSv4, where eventually, posting a FAST_REG_MR Work Request fails with -ENOMEM because the Work Queue has overflowed. The connection is dropped and re-established. Cap the rep_cqinit setting so completions are not left turned off for too long. BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=269 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25xprtrdma: Return an errno from rpcrdma_register_external()Chuck Lever
The RPC/RDMA send_request method and the chunk registration code expects an errno from the registration function. This allows the upper layers to distinguish between a recoverable failure (for example, temporary memory exhaustion) and a hard failure (for example, a bug in the registration logic). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2014-11-25net-timestamp: Fix a documentation typoAndrew Lutomirski
SOF_TIMESTAMPING_OPT_ID puts the id in ee_data, not ee_info. Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-25arm64: alternatives: fix pr_fmt string for consistencyWill Deacon
Consistently use the plural form for alternatives pr_fmt strings. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25mfd: da9063: Get irq base dynamically before registering deviceDmitry Lavnikevich
After registering mfd device with proper irq_base platform_get_irq_byname() calls will return VIRQ instead of local IRQ. This fixes da9063 rtc registration issue: da9063-rtc da9063-rtc: Failed to request ALARM IRQ 1: -22 Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: max14577: Fix obvious typo in company name in copyrightKrzysztof Kozlowski
Fix a typo in name of company in copyright comment. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: axp20x: Constify axp20x_acpi_match and rid unused warningLee Jones
axp20x.c:239:30: warning: ‘axp20x_acpi_match’ defined but not used [-Wunused-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: t7l66xb: prepare/unprepare clocksDmitry Eremin-Solenikov
Change clk_enable/disable() calls to clk_prepare_enable() and clk_disable_unprepare(). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2014-11-25mfd: tc6387xb: prepare/unprepare clocksDmitry Eremin-Solenikov
Change clk_enable/disable() calls to clk_prepare_enable() and clk_disable_unprepare(). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2014-11-25mfd: dln2: add support for USB-SPI moduleLaurentiu Palcu
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2014-11-25mfd: wm5110: Add missing registers for AIF2 channels 3-6Charles Keepax
When the extra 4 channels were added to AIF2 the necessary frame control registers were not given defaults and marked readable. This patch fixes this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-11-25mfd: tc3589x: get rid of static baseLinus Walleij
The TC3589x driver is now a device tree-only driver, so we want only dynamic IRQs and GPIO numbers from the tc3589x, no static assignments. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-11-25mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registersCharles Keepax
These registers are documented in the datasheet and used as part of the extcon driver. Expose them properly through regmap as the datasheet notes they should be treated as volatile do so. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-11-25mfd: wm8997: Mark INTERRUPT_STATUS_2_MASK as readableCharles Keepax
Technically this register is not used on wm8997 however the regmap core requires a continuous block of IRQs. The simplest solution is just to add the register. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2014-11-25mfd: tc6393xb: Prepare/unprepare clocksDmitry Eremin-Solenikov
Change clk_enable/disable() calls to clk_prepare_enable() and clk_disable_unrepapre(). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: tps65090: Fix bonkers indenting strategyLee Jones
First spotted pointless (incorrect) indent of 'if (ret)', then double indentations of a struct attribute 'mask'. Decided to go through the whole file and make amendments instead and this is the result. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: tc6393xb: Fail ohci suspend if full state restore is requiredDmitry Eremin-Solenikov
Some boards with TC6393XB chip require full state restore during system resume thanks to chip's VCC being cut off during suspend (Sharp SL-6000 tosa is one of them). Failing to do so would result in ohci Oops on resume due to internal memory contentes being changed. Fail ohci suspend on tc6393xb is full state restore is required. Recommended workaround is to unbind tmio-ohci driver before suspend and rebind it after resume. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: lpc_sch: Don't call mfd_remove_devices()Andy Shevchenko
MFD core already cares about failing registration. It will remove successfully registered devices in case of error. Thus, no need to repeatedly call mfd_remove_devices(). Fixes: 5829e9b64e65 (mfd: lpc_sch: Accomodate partial population of the MFD devices) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: wm8350-core: Fix probable mask then right shift defectJoe Perches
Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. Add parentheses around the mask. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: ab8500-sysctrl: Drop ab8500_restartGuenter Roeck
ab8500_restart is not called from anywhere in the kernel, so drop it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: db8500-prcmu: Provide sane error path valuesLee Jones
Also rid superfluous gotos and label. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: db8500-prcmu: Check return of devm_ioremap for errorPramod Gurav
Error check around return value of devm_ioremap is missing. Add the same to avoid NULL pointer dereference. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: twl4030-power: Fix regression with missing compatible flagTony Lindgren
Commit e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration") accidentally removed the compatible flag for "ti,twl4030-power" that should be there as documented in the binding. If "ti,twl4030-power" only the poweroff configuration is done by the driver. Fixes: e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration") Cc: stable@vger.kernel.org # v3.16+ Reported-by: "Dr. H. Nikolaus Schaller" <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: rtsx: Fix PM suspend for 5227 & 5249Micky Ching
Fix rts5227&5249 failed send buffer cmd after suspend, PM_CTRL3 should reset before send any buffer cmd after suspend. Otherwise, buffer cmd will failed, this will lead resume fail. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd/regulator: dt-bindings: max77686: Document regulators off in suspendKrzysztof Kozlowski
Add information which regulators can be disabled during system suspend. Suggested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25Revert "mfd: sec-core: Prepare regulators for suspend state to reduce ↵Javier Martinez Canillas
power-consumption" This reverts commit b7cde7078d2344073c310aa65fc2b0a845d2cb5b ("mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption") Commit b7cde7078d23 called regulator_suspend_prepare() to prepare the regulators for a suspend state. But it did from the device pm suspend handler while the regulator suspend prepare function iterates over all regulators and not only the one managed by this device so it doesn't seems to be correct to call it from within a device driver. It is better to call the regulator suspend prepare/finish functions from platform code instead so this patch reverts the mentioned commit. Suggested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: max77693: Map charger device to its own of_nodeKrzysztof Kozlowski
Add a "maxim,max77693-charger" of_compatible to the mfd_cell so the MFD child device (the charger) will have its own of_node set. This will be used by the max77693 charger driver in next patches to obtain battery configuration from DTS. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: arizona-spi: Add lines after declarations - checkpatch catchWill Sheppard
This was found whilst running checkpatch.pl on arizona-spi. WARNING: Missing a blank line after declarations + struct arizona *arizona = spi_get_drvdata(spi); + arizona_dev_exit(arizona); Signed-off-by: Will Sheppard <wsheppard@embedded-bits.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: max77693: Remove unused defineKrzysztof Kozlowski
Remove old MAX77693_NUM_IRQ_MUIC_REGS define. Not used anywhere. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: Add documentation for atmel-hlcdc DT bindingsBoris Brezillon
The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 family or sama5d3 family) exposes 2 subdevices: - a display controller (controlled by a DRM driver) - a PWM chip This patch adds documentation for atmel-hlcdc DT bindings. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: Add atmel-hlcdc driverBoris Brezillon
The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 family or sama5d3 family) exposes 2 subdevices: - a display controller (controlled by a DRM driver) - a PWM chip The MFD device provides a regmap and several clocks (those connected to this hardware block) to its subdevices. This way concurrent accesses to the iomem range are handled by the regmap framework, and each subdevice can safely access HLCDC registers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: core: Fix platform-device id generationJohan Hovold
Make sure to always honour multi-function devices registered with PLATFORM_DEVID_NONE (-1) or PLATFORM_DEVID_AUTO (-2) as id base. In this case it does not make sense to append the cell id to the mfd-id base and potentially change the requested behaviour. Specifically this will allow multi-function devices to be registered with PLATFORM_DEVID_AUTO while still having non-zero cell ids. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25HID: hid-sensor-hub: Use mfd_add_hotplug_devices() helperJohan Hovold
Use mfd_add_hotplug_devices() helper to register the subdevices. Compile-only tested. Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: Use mfd_add_hotplug_devices() helperJohan Hovold
Use mfd_add_hotplug_devices helper to register the subdevices. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: syscon: Decouple syscon interface from platform devicesPankaj Dubey
Currently a syscon entity can be only registered directly through a platform device that binds to a dedicated syscon driver. However in certain use cases it is desirable to make a device used with another driver a syscon interface provider. For example, certain SoCs (e.g. Exynos) contain system controller blocks which perform various functions such as power domain control, CPU power management, low power mode control, but in addition contain certain IP integration glue, such as various signal masks, coprocessor power control, etc. In such case, there is a need to have a dedicated driver for such system controller but also share registers with other drivers. The latter is where the syscon interface is helpful. In case of DT based platforms, this patch decouples syscon object from syscon platform driver, and allows to create syscon objects first time when it is required by calling of syscon_regmap_lookup_by APIs and keep a list of such syscon objects along with syscon provider device_nodes and regmap handles. For non-DT based platforms, this patch keeps syscon platform driver structure so that syscon can be probed and such non-DT based drivers can use syscon_regmap_lookup_by_pdev API and access regmap handles. Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT based, we can completely remove platform driver of syscon, and keep only helper functions to get regmap handles. Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Tomasz Figa <tomasz.figa@gmail.com> Tested-by: Vivek Gautam <gautam.vivek@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: max77693: Update DT binding to support hapticJaewon Kim
This patch add haptic DT binding documentation and example to support haptic driver in max77693 Multifunction device. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: max77693: Add haptic of_compatible in mfd_cellJaewon Kim
This patch add haptic of_compatible in order to use the haptic device driver using Devicetree. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: max77693: Initialize haptic register mapJaewon Kim
This patch add regmap_haptic initialization to use haptic register map in haptic device driver. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: tps65217: Add compatible string for subdevicesJohannes Pointner
Adds of_compatible strings to mfd_cells for sub devices of the tps65217. Signed-off-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25Merge branches 'ib-mfd-gpio-i2c-3.19', 'ib-mfd-iio-3.19' and ↵Lee Jones
'ib-mfd-regulator-v3.19', tag 'ib-mfd-regulator-clk-v3.19' into ibs-for-mfd-merged Immutable branch between MFD, Regulator and Clk, due for v3.19
2014-11-25arm64: vmlinux.lds.S: don't discard .exit.* sections at link-timeWill Deacon
.exit.* sections may be subject to patching by the new alternatives framework and so shouldn't be discarded at link-time. Without this patch, such a section will result in the following linker error: `.exit.text' referenced in section `.altinstructions' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25arm64: Factor out fixmap initialization from ioremapLaura Abbott
The fixmap API was originally added for arm64 for early_ioremap purposes. It can be used for other purposes too so move the initialization from ioremap to somewhere more generic. This makes it obvious where the fixmap is being set up and allows for a cleaner implementation of __set_fixmap. Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25arm64: Move cpu_resume into the text sectionLaura Abbott
The function cpu_resume currently lives in the .data section. There's no reason for it to be there since we can use relative instructions without a problem. Move a few cpu_resume data structures out of the assembly file so the .data annotation can be dropped completely and cpu_resume ends up in the read only text section. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Kees Cook <keescook@chromium.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25arm64: Switch to adrp for loading the stub vectorsLaura Abbott
The hyp stub vectors are currently loaded using adr. This instruction has a +/- 1MB range for the loading address. If the alignment for sections is changed the address may be more than 1MB away, resulting in reclocation errors. Switch to using adrp for getting the address to ensure we aren't affected by the location of the __hyp_stub_vectors. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-25arm64: Treat handle_arch_irq as a function pointerLaura Abbott
handle_arch_irq isn't actually text, it's just a function pointer. It doesn't need to be stored in the text section and doing so causes problesm if we ever want to make the kernel text read only. Declare handle_arch_irq as a proper function pointer stored in the data section. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
generated by cgit (git 2.34.1) at 2025-10-01 18:49:20 +0000