summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-11x86,efi: Check max_size only if it is non-zero.Richard Weinberger
Some EFI implementations return always a MaximumVariableSize of 0, check against max_size only if it is non-zero. My Intel DQ67SW desktop board has such an implementation. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-11kvm/ppc/e500: eliminate tlb_refsScott Wood
Commit 523f0e5421c12610527c620b983b443f329e3a32 ("KVM: PPC: E500: Explicitly mark shadow maps invalid") began using E500_TLB_VALID for guest TLB1 entries, and skipping invalidations if it's not set. However, when E500_TLB_VALID was set for such entries, it was on a fake local ref, and so the invalidations never happen. gtlb_privs is documented as being only for guest TLB0, though we already violate that with E500_TLB_BITMAP. Now that we have MMU notifiers, and thus don't need to actually retain a reference to the mapped pages, get rid of tlb_refs, and use gtlb_privs for E500_TLB_VALID in TLB1. Since we can have more than one host TLB entry for a given tlbe_ref, be careful not to clear existing flags that are relevant to other host TLB entries when preparing a new host TLB entry. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-11kvm/ppc/e500: g2h_tlb1_map: clear old bit before setting new bitScott Wood
It's possible that we're using the same host TLB1 slot to map (a presumably different portion of) the same guest TLB1 entry. Clear the bit in the map before setting it, so that if the esels are the same the bit will remain set. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-11kvm/ppc/e500: h2g_tlb1_rmap: esel 0 is validScott Wood
Add one to esel values in h2g_tlb1_rmap, so that "no mapping" can be distinguished from "esel 0". Note that we're not saved by the fact that host esel 0 is reserved for non-KVM use, because KVM host esel numbering is not the raw host numbering (see to_htlb1_esel). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-11powerpc/85xx: Fix MPC8536DS 36-bit device treeKumar Gala
The localbus node should be in at 0xfffe05000 not 0xffe05000. Also fixed the names of the localbus and pci nodes to reflect the addresses they are actually at. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-11powerpc/85xx: enable Silicon image 3132 PCIe to SATA controllerRoy ZANG
Some 85xx board, for example, P1020RDB-PC has on board silicon image PCIe to SATA controller and when booting up, the filesystem will auto mount to the SATA disk. So enable silicon image 3132 pcie to sata controller by default Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-11powerpc/fsl: Add property for 'era' in SEC dts crypto nodeVakul Garg
The crypto node now contains a new property 'fsl,sec-era'. This is required so that applications can retrieve era info without having to be able to read SEC's register space. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-11powerpc/fsl: removed qoriq-sec4.1-0.dtsi.Vakul Garg
Removing qoriq-sec4.1-0.dtsi as it is not used by any soc anymore. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-11target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBsNicholas Bellinger
This patch fixes a bug where a handful of informational / control CDBs that should be allowed during ALUA access state Standby/Offline/Transition where incorrectly returning CHECK_CONDITION + ASCQ_04H_ALUA_TG_PT_*. This includes INQUIRY + REPORT_LUNS, which would end up preventing LUN registration when LUN scanning occured during these ALUA access states. Cc: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-11tcm_vhost: Send bad target to guest when cmd failsAsias He
Send bad target to guest in case: 1) we can not allocate the cmd 2) fail to submit the cmd Signed-off-by: Asias He <asias@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-11tcm_vhost: Add vhost_scsi_send_bad_target() helperAsias He
Share the send bad target code with other use cases. Signed-off-by: Asias He <asias@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-11tcm_vhost: Fix tv_cmd leak in vhost_scsi_handle_vqAsias He
If we fail to submit the allocated tv_vmd to tcm_vhost_submission_work, we will leak the tv_vmd. Free tv_vmd on fail path. Signed-off-by: Asias He <asias@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-11tcm_vhost: Remove double check of responseAsias He
We did the length of response check twice. Signed-off-by: Asias He <asias@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-11x86/mm/cpa: Convert noop to functional fixAndrea Arcangeli
Commit: a8aed3e0752b ("x86/mm/pageattr: Prevent PSE and GLOABL leftovers to confuse pmd/pte_present and pmd_huge") introduced a valid fix but one location that didn't trigger the bug that lead to finding those (small) problems, wasn't updated using the right variable. The wrong variable was also initialized for no good reason, that may have been the source of the confusion. Remove the noop initialization accordingly. Commit a8aed3e0752b also erroneously removed one canon_pgprot pass meant to clear pmd bitflags not supported in hardware by older CPUs, that automatically gets corrected by this patch too by applying it to the right variable in the new location. Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Andy Whitcroft <apw@canonical.com> Cc: Mel Gorman <mgorman@suse.de> Link: http://lkml.kernel.org/r/1365600505-19314-1-git-send-email-aarcange@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-10Merge tag 'char-misc-3.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg Kroah-Hartman: "Here is a single Kconfig dependancy build fix for 3.9. It's been in linux-next for a while, and fixes a problem that has been reported multiple times." * tag 'char-misc-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc/vmw_vmci: Add dependency on CONFIG_NET
2013-04-10Merge tag 'tty-3.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg Kroah-Hartman: "Here are 4 small tty/serial fixes for 3.9. One fixes a bug where we broke the documentation build, and the others fix reported problems in some serial drivers. All have been in linux-next for a while" * tag 'tty-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: mxser: fix cycle termination condition in mxser_probe() and mxser_module_init() Revert "tty/8250_pnp: serial port detection regression since v3.7" OMAP/serial: Revert bad fix of Rx FIFO threshold granularity tty: Documentation: fix a path in a DocBook template
2013-04-10Merge tag 'stable/for-linus-3.9-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: "Two bug-fixes: - Early bootup issue found on DL380 machines - Fix for the timer interrupt not being processed right awaym leading to quite delayed time skew on certain workloads" * tag 'stable/for-linus-3.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/mmu: On early bootup, flush the TLB when changing RO->RW bits Xen provided pagetables. xen/events: Handle VIRQ_TIMER before any other hardirq in event loop.
2013-04-10Merge tag 'trace-fixes-3.9-rc-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Namhyung Kim fixed a long standing bug that can cause a kernel panic. If the function profiler fails to allocate memory for everything, it will do a double free on the same pointer which can cause a panic" * tag 'trace-fixes-3.9-rc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix double free when function profile init failed
2013-04-11kvm/powerpc/e500mc: fix tlb invalidation on cpu migrationScott Wood
The existing check handles the case where we've migrated to a different core than we last ran on, but it doesn't handle the case where we're still on the same cpu we last ran on, but some other vcpu has run on this cpu in the meantime. Without this, guest segfaults (and other misbehavior) have been seen in smp guests. Cc: stable@vger.kernel.org # 3.8.x Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) cfg80211_conn_scan() must be called with the sched_scan_mutex, fix from Artem Savkov. 2) Fix regression in TCP ICMPv6 processing, we do not want to treat redirects as socket errors, from Christoph Paasch. 3) Fix several recvmsg() msg_name kernel memory leaks into userspace, in ATM, AX25, Bluetooth, CAIF, IRDA, s390 IUCV, L2TP, LLC, Netrom, NFC, Rose, TIPC, and VSOCK. From Mathias Krause and Wei Yongjun. 4) Fix AF_IUCV handling of segmented SKBs in recvmsg(), from Ursula Braun and Eric Dumazet. 5) CAN gw.c code does kfree() on SLAB cache memory, use kmem_cache_free() instead. Fix from Wei Yongjun. 6) Fix LSM regression on TCP SYN/ACKs, some LSMs such as SELINUX want an skb->sk socket context available for these packets, but nothing else requires it. From Eric Dumazet and Paul Moore. 7) Fix ipv4 address lifetime processing so that we don't perform sleepable acts inside of rcu_read_lock() sections, do them in an rtnl_lock() section instead. From Jiri Pirko. 8) mvneta driver accidently sets HW features after device registry, it should do so beforehand. Fix from Willy Tarreau. 9) Fix bonding unload races more correctly, from Nikolay Aleksandrov and Veaceslav Falico. 10) rtnl_dump_ifinfo() and rtnl_calcit() invoke nlmsg_parse() with wrong header size argument. Fix from Michael Riesch. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) lsm: add the missing documentation for the security_skb_owned_by() hook bnx2x: Prevent null pointer dereference in AFEX mode e100: Add dma mapping error check selinux: add a skb_owned_by() hook can: gw: use kmem_cache_free() instead of kfree() netrom: fix invalid use of sizeof in nr_recvmsg() qeth: fix qeth_wait_for_threads() deadlock for OSN devices af_iucv: fix recvmsg by replacing skb_pull() function rtnetlink: Call nlmsg_parse() with correct header length bonding: fix bonding_masters race condition in bond unloading Revert "bonding: remove sysfs before removing devices" net: mvneta: enable features before registering the driver hyperv: Fix RNDIS send_completion code path hyperv: Fix a kernel warning from netvsc_linkstatus_callback() net: ipv4: fix schedule while atomic bug in check_lifetime() net: ipv4: reset check_lifetime_work after changing lifetime bnx2x: Fix KR2 rapid link flap sctp: remove 'sridhar' from maintainers list VSOCK: Fix missing msg_namelen update in vsock_stream_recvmsg() VSOCK: vmci - fix possible info leak in vmci_transport_dgram_dequeue() ...
2013-04-10Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds
Pull C6X fix from Mark Salter. Final (?) fix from the barrier discussion. * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: add memory barrier to arch_local_irq_restore
2013-04-10cifs: Allow passwords which begin with a delimitorSachin Prabhu
Fixes a regression in cifs_parse_mount_options where a password which begins with a delimitor is parsed incorrectly as being a blank password. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-04-10lsm: add the missing documentation for the security_skb_owned_by() hookPaul Moore
Unfortunately we didn't catch the missing comments earlier when the patch was merged. Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-10mac80211: fix cfg80211 interaction on auth/assoc requestJohannes Berg
If authentication (or association with FT) is requested by userspace, mac80211 currently doesn't tell cfg80211 that it disconnected from the AP. That leaves inconsistent state: cfg80211 thinks it's connected while mac80211 thinks it's not. Typically this won't last long, as soon as mac80211 reports the new association to cfg80211 the old one goes away. If, however, the new authentication or association doesn't succeed, then cfg80211 will forever think the old one still exists and will refuse attempts to authenticate or associate with the AP it thinks it's connected to. Anders reported that this leads to it taking a very long time to reconnect to a network, or never even succeeding. I tested this with an AP hacked to never respond to auth frames, and one that works, and with just those two the system never recovers because one won't work and cfg80211 thinks it's connected to the other so refuses connections to it. To fix this, simply make mac80211 tell cfg80211 when it is no longer connected to the old AP, while authenticating or associating to a new one. Cc: stable@vger.kernel.org Reported-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10bnx2x: Prevent null pointer dereference in AFEX modeYuval Mintz
The cnic module is responsible for initializing various bnx2x structs via callbacks provided by the bnx2x module. One such struct is the queue object for the FCoE queue. If a device is working in AFEX mode and its configuration allows FCoE yet the cnic module is not loaded, it's very likely a null pointer dereference will occur, as the bnx2x will erroneously access the FCoE's queue object. Prevent said access until cnic properly registers itself. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-10e100: Add dma mapping error checkNeil Horman
e100 uses pci_map_single, but fails to check for a dma mapping error after its use, resulting in a stack trace: [ 46.656594] ------------[ cut here ]------------ [ 46.657004] WARNING: at lib/dma-debug.c:933 check_unmap+0x47b/0x950() [ 46.657004] Hardware name: To Be Filled By O.E.M. [ 46.657004] e100 0000:00:0e.0: DMA-API: device driver failed to check map error[device address=0x000000007a4540fa] [size=90 bytes] [mapped as single] [ 46.657004] Modules linked in: [ 46.657004] w83627hf hwmon_vid snd_via82xx ppdev snd_ac97_codec ac97_bus snd_seq snd_pcm snd_mpu401 snd_mpu401_uart ns558 snd_rawmidi gameport parport_pc e100 snd_seq_device parport snd_page_alloc snd_timer snd soundcore skge shpchp k8temp mii edac_core i2c_viapro edac_mce_amd nfsd auth_rpcgss nfs_acl lockd sunrpc binfmt_misc uinput ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper ttm firewire_ohci drm firewire_core pata_via sata_via i2c_core sata_promise crc_itu_t [ 46.657004] Pid: 792, comm: ip Not tainted 3.8.0-0.rc6.git0.1.fc19.x86_64 #1 [ 46.657004] Call Trace: [ 46.657004] <IRQ> [<ffffffff81065ed0>] warn_slowpath_common+0x70/0xa0 [ 46.657004] [<ffffffff81065f4c>] warn_slowpath_fmt+0x4c/0x50 [ 46.657004] [<ffffffff81364cfb>] check_unmap+0x47b/0x950 [ 46.657004] [<ffffffff8136522f>] debug_dma_unmap_page+0x5f/0x70 [ 46.657004] [<ffffffffa030f0f0>] ? e100_tx_clean+0x30/0x210 [e100] [ 46.657004] [<ffffffffa030f1a8>] e100_tx_clean+0xe8/0x210 [e100] [ 46.657004] [<ffffffffa030fc6f>] e100_poll+0x56f/0x6c0 [e100] [ 46.657004] [<ffffffff8159dce1>] ? net_rx_action+0xa1/0x370 [ 46.657004] [<ffffffff8159ddb2>] net_rx_action+0x172/0x370 [ 46.657004] [<ffffffff810703bf>] __do_softirq+0xef/0x3d0 [ 46.657004] [<ffffffff816e4ebc>] call_softirq+0x1c/0x30 [ 46.657004] [<ffffffff8101c485>] do_softirq+0x85/0xc0 [ 46.657004] [<ffffffff81070885>] irq_exit+0xd5/0xe0 [ 46.657004] [<ffffffff816e5756>] do_IRQ+0x56/0xc0 [ 46.657004] [<ffffffff816dacb2>] common_interrupt+0x72/0x72 [ 46.657004] <EOI> [<ffffffff816da1eb>] ? _raw_spin_unlock_irqrestore+0x3b/0x70 [ 46.657004] [<ffffffff816d124d>] __slab_free+0x58/0x38b [ 46.657004] [<ffffffff81214424>] ? fsnotify_clear_marks_by_inode+0x34/0x120 [ 46.657004] [<ffffffff811b0417>] ? kmem_cache_free+0x97/0x320 [ 46.657004] [<ffffffff8157fc14>] ? sock_destroy_inode+0x34/0x40 [ 46.657004] [<ffffffff8157fc14>] ? sock_destroy_inode+0x34/0x40 [ 46.657004] [<ffffffff811b0692>] kmem_cache_free+0x312/0x320 [ 46.657004] [<ffffffff8157fc14>] sock_destroy_inode+0x34/0x40 [ 46.657004] [<ffffffff811e8c28>] destroy_inode+0x38/0x60 [ 46.657004] [<ffffffff811e8d5e>] evict+0x10e/0x1a0 [ 46.657004] [<ffffffff811e9605>] iput+0xf5/0x180 [ 46.657004] [<ffffffff811e4338>] dput+0x248/0x310 [ 46.657004] [<ffffffff811ce0e1>] __fput+0x171/0x240 [ 46.657004] [<ffffffff811ce26e>] ____fput+0xe/0x10 [ 46.657004] [<ffffffff8108d54c>] task_work_run+0xac/0xe0 [ 46.657004] [<ffffffff8106c6ed>] do_exit+0x26d/0xc30 [ 46.657004] [<ffffffff8109eccc>] ? finish_task_switch+0x7c/0x120 [ 46.657004] [<ffffffff816dad58>] ? retint_swapgs+0x13/0x1b [ 46.657004] [<ffffffff8106d139>] do_group_exit+0x49/0xc0 [ 46.657004] [<ffffffff8106d1c4>] sys_exit_group+0x14/0x20 [ 46.657004] [<ffffffff816e3b19>] system_call_fastpath+0x16/0x1b [ 46.657004] ---[ end trace 4468c44e2156e7d1 ]--- [ 46.657004] Mapped at: [ 46.657004] [<ffffffff813663d1>] debug_dma_map_page+0x91/0x140 [ 46.657004] [<ffffffffa030e8eb>] e100_xmit_prepare+0x12b/0x1c0 [e100] [ 46.657004] [<ffffffffa030c924>] e100_exec_cb+0x84/0x140 [e100] [ 46.657004] [<ffffffffa030e56a>] e100_xmit_frame+0x3a/0x190 [e100] [ 46.657004] [<ffffffff8159ee89>] dev_hard_start_xmit+0x259/0x6c0 Easy fix, modify the cb paramter to e100_exec_cb to return an error, and do the dma_mapping_error check in the obvious place This was reported previously here: http://article.gmane.org/gmane.linux.network/257893 But nobody stepped up and fixed it. CC: Josh Boyer <jwboyer@redhat.com> CC: e1000-devel@lists.sourceforge.net Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Michal Jaegermann <michal@harddata.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-10powerpc/512x: add ifm ac14xx boardAnatolij Gustschin
Add dts file for ac14xx board and its board compatible string to the generic mpc512x board match list. Also add phandle to the dma DT node since there is a change (for MPC5121 SDHC DMA support) merged via linux-mmc tree with reference to the dma controller node in the sdhc node. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-04-10powerpc/mpc512x: add platform code for MPC5125.Matteo Facchinetti
Tested on MPC5125 Tower evaluation board with mpc512x_defconfig compile configuration. In detail, supports for: - PSC / UART - RTC - ETH - DIU - I2C Signed-off-by: Matteo Facchinetti <matteo.facchinetti@sirius-es.it> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-04-10x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metalBoris Ostrovsky
Invoking arch_flush_lazy_mmu_mode() results in calls to preempt_enable()/disable() which may have performance impact. Since lazy MMU is not used on bare metal we can patch away arch_flush_lazy_mmu_mode() so that it is never called in such environment. [ hpa: the previous patch "Fix vmalloc_fault oops during lazy MMU updates" may cause a minor performance regression on bare metal. This patch resolves that performance regression. It is somewhat unclear to me if this is a good -stable candidate. ] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1364045796-10720-2-git-send-email-konrad.wilk@oracle.com Tested-by: Josh Boyer <jwboyer@redhat.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> SEE NOTE ABOVE
2013-04-10x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updatesSamu Kallio
In paravirtualized x86_64 kernels, vmalloc_fault may cause an oops when lazy MMU updates are enabled, because set_pgd effects are being deferred. One instance of this problem is during process mm cleanup with memory cgroups enabled. The chain of events is as follows: - zap_pte_range enables lazy MMU updates - zap_pte_range eventually calls mem_cgroup_charge_statistics, which accesses the vmalloc'd mem_cgroup per-cpu stat area - vmalloc_fault is triggered which tries to sync the corresponding PGD entry with set_pgd, but the update is deferred - vmalloc_fault oopses due to a mismatch in the PUD entries The OOPs usually looks as so: ------------[ cut here ]------------ kernel BUG at arch/x86/mm/fault.c:396! invalid opcode: 0000 [#1] SMP .. snip .. CPU 1 Pid: 10866, comm: httpd Not tainted 3.6.10-4.fc18.x86_64 #1 RIP: e030:[<ffffffff816271bf>] [<ffffffff816271bf>] vmalloc_fault+0x11f/0x208 .. snip .. Call Trace: [<ffffffff81627759>] do_page_fault+0x399/0x4b0 [<ffffffff81004f4c>] ? xen_mc_extend_args+0xec/0x110 [<ffffffff81624065>] page_fault+0x25/0x30 [<ffffffff81184d03>] ? mem_cgroup_charge_statistics.isra.13+0x13/0x50 [<ffffffff81186f78>] __mem_cgroup_uncharge_common+0xd8/0x350 [<ffffffff8118aac7>] mem_cgroup_uncharge_page+0x57/0x60 [<ffffffff8115fbc0>] page_remove_rmap+0xe0/0x150 [<ffffffff8115311a>] ? vm_normal_page+0x1a/0x80 [<ffffffff81153e61>] unmap_single_vma+0x531/0x870 [<ffffffff81154962>] unmap_vmas+0x52/0xa0 [<ffffffff81007442>] ? pte_mfn_to_pfn+0x72/0x100 [<ffffffff8115c8f8>] exit_mmap+0x98/0x170 [<ffffffff810050d9>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e [<ffffffff81059ce3>] mmput+0x83/0xf0 [<ffffffff810624c4>] exit_mm+0x104/0x130 [<ffffffff8106264a>] do_exit+0x15a/0x8c0 [<ffffffff810630ff>] do_group_exit+0x3f/0xa0 [<ffffffff81063177>] sys_exit_group+0x17/0x20 [<ffffffff8162bae9>] system_call_fastpath+0x16/0x1b Calling arch_flush_lazy_mmu_mode immediately after set_pgd makes the changes visible to the consistency checks. Cc: <stable@vger.kernel.org> RedHat-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=914737 Tested-by: Josh Boyer <jwboyer@redhat.com> Reported-and-Tested-by: Krishna Raman <kraman@redhat.com> Signed-off-by: Samu Kallio <samu.kallio@aberdeencloud.com> Link: http://lkml.kernel.org/r/1364045796-10720-1-git-send-email-konrad.wilk@oracle.com Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-10Merge tag 'nfs-for-3.9-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull another nfs fixlet from Trond Myklebust: "I suddenly noticed that a one-line issue that I _thought_ I had fixed with the nfs41_walk_client_list patch was apparently still there in the pull request I sent earlier today. I'm very sorry for not catching that in time. - Fix a brain fart in nfs41_walk_client_list" * tag 'nfs-for-3.9-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Doh! Typo in the fix to nfs41_walk_client_list
2013-04-10arm: mvebu: Fix the irq map function in SMP modeGregory CLEMENT
This patch fix the regression introduced by the commit 3202bf0157ccb "arm: mvebu: Improve the SMP support of the interrupt controller": GPIO IRQ were no longer delivered to the CPUs. To be delivered to a CPU an interrupt must be enabled at CPU level and at interrupt source level. Before the offending patch, all the interrupts were enabled at source level during map() function. Mask() and unmask() was done by handling the per-CPU part. It was fine when running in UP with only one CPU. The offending patch added support for SMP, in this case mask() and unmask() was done by handling the interrupt source level part. The per-CPU level part was handled by the affinity API to select the CPU which will receive the interrupt. (Due to some hardware limitation only one CPU at a time can received a given interrupt). For "normal" interrupt __setup_irq() was called when an irq was registered. irq_set_affinity() is called from this function, which enabled the interrupt on one of the CPUs. Whereas for GPIO IRQ which were chained interrupts, the irq_set_affinity() was never called and none of the CPUs was selected to receive the interrupt. With this patch all the interrupt are enable on the current CPU during map() function. Enabling the interrupts on a CPU doesn't depend anymore on irq_set_affinity() and then the chained irq are not anymore a special case. However the CPU which will receive the irq can still be modify later using irq_set_affinity(). Tested with Mirabox (A370) and Openblocks AX3 (AXP), rootfs mounted over NFS, compiled with CONFIG_SMP=y/N. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reported-by: Ryan Press <ryan@presslab.us> Investigated-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Ryan Press <ryan@presslab.us> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-10NFSv4: Doh! Typo in the fix to nfs41_walk_client_listTrond Myklebust
Make sure that we set the status to 0 on success. Missed in testing because it never appears when doing multiple mounts to _different_ servers. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: <stable@vger.kernel.org> # 3.7.x: 7b1f1fd: NFSv4/4.1: Fix bugs in nfs4[01]_walk_client_list
2013-04-10Fix GE0/GE1 init on ix2-200 as GE0 has no PHYNigel Roberts
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-10Merge tag 'nfs-for-3.9-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: - fix for memory corruption issues in nfs4[01]_walk_client_list (stable) - fix for an Oopsable bug in rpc_clone_client (stable) - another state manager deadlock in the NFSv4 open code - memory leaks in nfs4_discover_server_trunking and rpc_new_client * tag 'nfs-for-3.9-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix another potential state manager deadlock SUNRPC: Fix a potential memory leak in rpc_new_client NFSv4/4.1: Fix bugs in nfs4[01]_walk_client_list NFSv4: Fix a memory leak in nfs4_discover_server_trunking SUNRPC: Remove extra xprt_put()
2013-04-10powerpc/85xx: Update corenet64_smp_defconfig for B4_QDSShaveta Leekha
Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10powerpc/fsl-booke: Add B4_QDS board supportShaveta Leekha
- Add support for B4 board in board file b4_qds.c, It is common for B4860, B4420 and B4220QDS as they share same QDS board - Add B4QDS support in Kconfig and Makefile B4860QDS is a high-performance computing evaluation, development and test platform supporting the B4860 QorIQ Power Architecture processor, with following major features: - Four dual-threaded e6500 Power Architecture processors organized in one cluster-each core runs up to 1.8 GHz - Two DDR3/3L controllers for high-speed memory interface each runs at up to 1866.67 MHz - CoreNet fabric that fully supports coherency using MESI protocol between the e6500 cores, SC3900 FVP cores, memories and external interfaces. - Data Path Acceleration Architecture having FMAN, QMan, BMan, SEC 5.3 and RMAN - Large internal cache memory with snooping and stashing capabilities - Sixteen 10-GHz SerDes lanes that serve: - Two SRIO interfaces. Each supports up to 4 lanes and a total of up to 8 lanes - Up to 8-lanes Common Public Radio Interface (CPRI) controller for glue-less antenna connection - Two 10-Gbit Ethernet controllers (10GEC) - Six 1G/2.5-Gbit Ethernet controllers for network communications - PCI Express controller - Debug (Aurora) - Various system peripherals B4420 and B4220 have some differences in comparison to B4860 with fewer core/clusters(both SC3900 and e6500), fewer DDR controllers, fewer serdes lanes, fewer SGMII interfaces and reduced target frequencies. Key differences between B4860 and B4420: B4420 has: - Fewer e6500 cores: 1 cluster with 2 e6500 cores - Fewer SC3900 cores/clusters: 1 cluster with 2 SC3900 cores per cluster - Single DDRC @ 1.6GHz - 2 X 4 lane serdes - 3 SGMII interfaces - no sRIO - no 10G Key differences between B4860 and B4220: B4220 has: - Fewer e6500 cores: 1 cluster with 1 e6500 core - Fewer SC3900 cores/clusters: 1 cluster with 2 SC3900 cores per cluster - Single DDRC @ 1.33GHz - 2 X 2 lane serdes - 2 SGMII interfaces - no sRIO - no 10G Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10powerpc/fsl-booke: Add initial B4860QDS and B4420QDS board device treeShaveta Leekha
B4860QDS and B4420QDS share same QDS board * common board features have been added in b4qds.dts * various board differences are in respective files of B4860 and B4420 Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10powerpc/fsl-booke: Add initial silicon device tree files for B4860 and B4420Shaveta Leekha
B4860 and B4420 are similar that share some commonalities * common features have been added in b4si-pre.dtsi and b4si-post.dtsi * differences are added in respective silicon files of B4860 and B4420 There are several things missing from the device trees of B4860 and B4420: * DPAA related nodes (Qman, Bman, Fman, Rman) * DSP related nodes/information * serdes, sfp(security fuse processor), thermal, gpio, maple, cpri, quad timers nodes Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10powerpc/fsl-pci Make PCIe hotplug work with Freescale PCIe controllersRojhalat Ibrahim
Up to now the PCIe link status on Freescale PCIe controllers was only checked once at boot time. So hotplug did not work. With this patch the link status is checked on every config read. PCIe devices not present at boot time are found after doing 'echo 1 >/sys/bus/pci/rescan'. Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10powerpc/fsl-pci: Keep PCI SoC controller registers in pci_controllerKumar Gala
Move to keeping the SoC registers that control and config the PCI controllers on FSL SoCs in the pci_controller struct. This allows us to not need to ioremap() the registers in multiple different places that use them. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10powerpc: remove "config MPC10X_OPENPIC"Paul Bolle
The last users of Kconfig symbol MPC10X_OPENPIC were removed in v2.6.27. Its Kconfig entry can be removed now. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-04-10ssb: implement spurious tone avoidanceRafał Miłecki
And make use of it in b43. This fixes a regression introduced with 49d55cef5b1925a5c1efb6aaddaa40fc7c693335 b43: N-PHY: implement spurious tone avoidance This commit made BCM4322 use only MCS 0 on channel 13, which of course resulted in performance drop (down to 0.7Mb/s). Reported-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10kbuild: generate generic headers before recursing into scriptsAndreas Schwab
The headers are now needed inside scripts/mod since 6543bec ("mod/file2alias: make modalias generation safe for cross compiling"). Reported-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Reported-and-tested-by: "Jon Medhurst (Tixy)" <tixy@linaro.org> Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-10dmaengine: omap-dma: Start DMA without delay for cyclic channelsPeter Ujfalusi
cyclic DMA is only used by audio which needs DMA to be started without a delay. If the DMA for audio is started using the tasklet we experience random channel switch (to be more precise: channel shift). Reported-by: Peter Meerwald <pmeerw@pmeerw.net> CC: stable@vger.kernel.org # v3.7+ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This fixes a GCM bug that breaks IPsec and a compile problem in ux500." * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ux500 - add missing comma crypto: gcm - fix assumption that assoc has one segment
2013-04-09Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Just a spare semicolon in nouveau that caused some issues, and an mgag200 fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/mgag200: Index 24 in extended CRTC registers is 24 in hex, not decimal. drm/nouveau: fix unconditional return waiting on memory
2013-04-10drm/mgag200: Index 24 in extended CRTC registers is 24 in hex, not decimal.Christopher Harvey
This change properly enables the "requester" in G200ER cards that is responsible for getting pixels out of memory and clocking them out to the screen. Signed-off-by: Christopher Harvey <charvey@matrox.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-09tracing: Fix double free when function profile init failedNamhyung Kim
On the failure path, stat->start and stat->pages will refer same page. So it'll attempt to free the same page again and get kernel panic. Link: http://lkml.kernel.org/r/1364820385-32027-1-git-send-email-namhyung@kernel.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: stable@vger.kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-04-10powerpc: fix compiling CONFIG_PPC_TRANSACTIONAL_MEM when CONFIG_ALTIVEC=nMichael Neuling
We can't compile a kernel with CONFIG_ALTIVEC=n when CONFIG_PPC_TRANSACTIONAL_MEM=y. We currently get: arch/powerpc/kernel/tm.S:320: Error: unsupported relocation against THREAD_VSCR arch/powerpc/kernel/tm.S:323: Error: unsupported relocation against THREAD_VR0 arch/powerpc/kernel/tm.S:323: Error: unsupported relocation against THREAD_VR0 etc. The below fixes this with a sprinkling of #ifdefs. This was found by mpe with kisskb: http://kisskb.ellerman.id.au/kisskb/buildresult/8539442/ Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
generated by cgit (git 2.34.1) at 2025-09-12 18:19:28 +0000