| Age | Commit message (Collapse) | Author |
|---|
|
wlvif could be passed as NULL from the wlcore_tx_work_locked()
to the wl1271_prepare_tx_frame() and to wl1271_skb_queue_head()
functions. This may lead to a Kernel panic, fix this by
validating that wlvif != NULL.
Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
|
|
Remove scan debug dumps which are rarely used.
Make scan debug prints more clear and short.
Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
|
|
We need some stuff done on idle change, most notably we have to stop
sched-scanning. Take care of this by reintroducing idle handling.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
|
|
We now disable elp sleep during plt mode to allow normal operation of
plt tools such as calibrator.
Having elp_sleep enabled during plt mode is actually not required and
in fact it disrupt plt operations such as rx statistics etc.
Signed-off-by: Yair Shapira <yair.shapira@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
|
|
Under this mode the chip is powered on including sdio
but no FW is downloaded and run, interrupts are not enabled, etc...
This mode is intended to allow RTTT to bridge sdio as a transport
to the chip.
Driver only provides sdio access using the dev_mem debugfs file.
Some fixes done to the code that ensures that PLT mode and normal
driver power mode (ifconfig/add_interface) are mutually excluded.
Signed-off-by: Yair Shapira <yair.shapira@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
|
|
Start a ROC on the AP channel beforing sending the authentication reply
to a connecting STA. This ROC is held up to 1 second via a timer. If the
station is authorized and added by mac80211, the ROC is extended until
the station is fully authorized.
We make sure not to ROC twice when several stations are connecting in
parallel and to only release the ROC when both the pending-reply timer
and the STA-state callbacks do not require it.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull assorted vfs fixes from Al Viro:
"A couple of bug fixes + removal of dead code in afs ->d_revalidate()"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs: dget_parent() can't return a negative dentry
ocfs2: needs ->d_lock to poke in ->d_parent->d_inode from ->d_revalidate()
sysv: Add forgotten superblock lock init for v7 fs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32
Pull AVR32 fixes from Hans-Christian Egtvedt.
Fix build warnings and use the Kbuild infrastructure for generic headers
rather than doing it by hand.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
avr32: cast syscall_return to silence compiler warning
avr32: fix clockevents kernel warning
avr32: use Kbuild infrastructure to handle the asm-generic headers
|
|
Pull S+core fixes from Lennox Wu:
"These updates include updating information of maintainers, fix some
trivial errors, and add a necessary function for supporting ipv6"
* tag 'for-linus-20130929' of git://github.com/sctscore/official-linux:
Score: Update the information of Score maintaners
Score: Modify the Makefile of Score, remove -mlong-calls for compiling
Score: Implement the function csum_ipv6_magic
Score: The commit is for compiling successfully
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC Fixes from Vineet Gupta:
- Handle unaligned access in zero delay loops
- spinlock livelock fix for SMP systemC model
- fix 32bit overflow in access_ok
- better setup of clockevents
* tag 'arc-fixes-for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: Use clockevents_config_and_register over clockevents_register_device
ARC: Workaround spinlock livelock in SMP SystemC simulation
ARC: Fix 32-bit wrap around in access_ok()
ARC: Handle zero-overhead-loop in unaligned access handler
|
|
In the flexcan_chip_start() function first the flexcan core is going through
the soft reset sequence, then the RX FIFO is enabled.
With the hardware is put into FIFO mode, message buffers 1...7 are reserved by
the FIFO engine. The remaining message buffers are in reset default values.
This patch removes the bogus initialization of the message buffers, as it
causes an imprecise external abort on imx6.
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TCP packets hitting the SYN proxy through the SYNPROXY target are not
validated by TCP conntrack. When th->doff is below 5, an underflow happens
when calculating the options length, causing skb_header_pointer() to
return NULL and triggering the BUG_ON().
Handle this case gracefully by checking for NULL instead of using BUG_ON().
Reported-by: Martin Topholm <mph@one.com>
Tested-by: Martin Topholm <mph@one.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The patch fixes the following compiler warning:
CC arch/avr32/kernel/process.o
arch/avr32/kernel/process.c: In function 'copy_thread':
arch/avr32/kernel/process.c:292: warning: assignment makes integer \
from pointer without a cast
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
|
|
Since commit 01426478df3a8791ff5c8b6b82d409e699cfaf38
(avr32: Use generic idle loop) the kernel throws the
following warning on avr32:
WARNING: at 900322e4 [verbose debug info unavailable]
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.0-rc2 #117
task: 901c3ecc ti: 901c0000 task.ti: 901c0000
PC is at cpu_idle_poll_ctrl+0x1c/0x38
LR is at comparator_mode+0x3e/0x40
pc : [<900322e4>] lr : [<90014882>] Not tainted
sp : 901c1f74 r12: 00000000 r11: 901c74a0
r10: 901d2510 r9 : 00000001 r8 : 901db4de
r7 : 901c74a0 r6 : 00000001 r5 : 00410020 r4 : 901db574
r3 : 00410024 r2 : 90206fe0 r1 : 00000000 r0 : 007f0000
Flags: qvnzc
Mode bits: hjmde....G
CPU Mode: Supervisor
Call trace:
[<90039ede>] clockevents_set_mode+0x16/0x2e
[<90039f00>] clockevents_shutdown+0xa/0x1e
[<9003a078>] clockevents_exchange_device+0x58/0x70
[<9003a78c>] tick_check_new_device+0x38/0x54
[<9003a1a2>] clockevents_register_device+0x32/0x90
[<900035c4>] time_init+0xa8/0x108
[<90000520>] start_kernel+0x128/0x23c
When the 'avr32_comparator' clockevent device is registered,
the clockevent core sets the mode of that clockevent device
to CLOCK_EVT_MODE_SHUTDOWN. Due to this, the 'comparator_mode'
function calls the 'cpu_idle_poll_ctrl' to disables idle poll.
This results in the aforementioned warning because the polling
is not enabled yet.
Change the code to only disable idle poll if it is enabled by
the same function to avoid the warning.
Cc: stable@vger.kernel.org
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
|
|
Use kbuild to add asm-generic headers that do nothing, also remove the arch
specific wrapper headers.
This only affects headers that do nothing but include the generic
equivalent. It does not touch any header that does a little more.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Superblock lock was replaced with (un)lock_super() removal, but left
uninitialized for Seventh Edition UNIX filesystem in the following commit (3.7):
c07cb01 sysv: drop lock/unlock super
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The recent 3.12 pull request for apparmor was missing a couple rcu _protected
access modifiers. Resulting in the follow suspicious RCU usage
[ 29.804534] [ INFO: suspicious RCU usage. ]
[ 29.804539] 3.11.0+ #5 Not tainted
[ 29.804541] -------------------------------
[ 29.804545] security/apparmor/include/policy.h:363 suspicious rcu_dereference_check() usage!
[ 29.804548]
[ 29.804548] other info that might help us debug this:
[ 29.804548]
[ 29.804553]
[ 29.804553] rcu_scheduler_active = 1, debug_locks = 1
[ 29.804558] 2 locks held by apparmor_parser/1268:
[ 29.804560] #0: (sb_writers#9){.+.+.+}, at: [<ffffffff81120a4c>] file_start_write+0x27/0x29
[ 29.804576] #1: (&ns->lock){+.+.+.}, at: [<ffffffff811f5d88>] aa_replace_profiles+0x166/0x57c
[ 29.804589]
[ 29.804589] stack backtrace:
[ 29.804595] CPU: 0 PID: 1268 Comm: apparmor_parser Not tainted 3.11.0+ #5
[ 29.804599] Hardware name: ASUSTeK Computer Inc. UL50VT /UL50VT , BIOS 217 03/01/2010
[ 29.804602] 0000000000000000 ffff8800b95a1d90 ffffffff8144eb9b ffff8800b94db540
[ 29.804611] ffff8800b95a1dc0 ffffffff81087439 ffff880138cc3a18 ffff880138cc3a18
[ 29.804619] ffff8800b9464a90 ffff880138cc3a38 ffff8800b95a1df0 ffffffff811f5084
[ 29.804628] Call Trace:
[ 29.804636] [<ffffffff8144eb9b>] dump_stack+0x4e/0x82
[ 29.804642] [<ffffffff81087439>] lockdep_rcu_suspicious+0xfc/0x105
[ 29.804649] [<ffffffff811f5084>] __aa_update_replacedby+0x53/0x7f
[ 29.804655] [<ffffffff811f5408>] __replace_profile+0x11f/0x1ed
[ 29.804661] [<ffffffff811f6032>] aa_replace_profiles+0x410/0x57c
[ 29.804668] [<ffffffff811f16d4>] profile_replace+0x35/0x4c
[ 29.804674] [<ffffffff81120fa3>] vfs_write+0xad/0x113
[ 29.804680] [<ffffffff81121609>] SyS_write+0x44/0x7a
[ 29.804687] [<ffffffff8145bfd2>] system_call_fastpath+0x16/0x1b
[ 29.804691]
[ 29.804694] ===============================
[ 29.804697] [ INFO: suspicious RCU usage. ]
[ 29.804700] 3.11.0+ #5 Not tainted
[ 29.804703] -------------------------------
[ 29.804706] security/apparmor/policy.c:566 suspicious rcu_dereference_check() usage!
[ 29.804709]
[ 29.804709] other info that might help us debug this:
[ 29.804709]
[ 29.804714]
[ 29.804714] rcu_scheduler_active = 1, debug_locks = 1
[ 29.804718] 2 locks held by apparmor_parser/1268:
[ 29.804721] #0: (sb_writers#9){.+.+.+}, at: [<ffffffff81120a4c>] file_start_write+0x27/0x29
[ 29.804733] #1: (&ns->lock){+.+.+.}, at: [<ffffffff811f5d88>] aa_replace_profiles+0x166/0x57c
[ 29.804744]
[ 29.804744] stack backtrace:
[ 29.804750] CPU: 0 PID: 1268 Comm: apparmor_parser Not tainted 3.11.0+ #5
[ 29.804753] Hardware name: ASUSTeK Computer Inc. UL50VT /UL50VT , BIOS 217 03/01/2010
[ 29.804756] 0000000000000000 ffff8800b95a1d80 ffffffff8144eb9b ffff8800b94db540
[ 29.804764] ffff8800b95a1db0 ffffffff81087439 ffff8800b95b02b0 0000000000000000
[ 29.804772] ffff8800b9efba08 ffff880138cc3a38 ffff8800b95a1dd0 ffffffff811f4f94
[ 29.804779] Call Trace:
[ 29.804786] [<ffffffff8144eb9b>] dump_stack+0x4e/0x82
[ 29.804791] [<ffffffff81087439>] lockdep_rcu_suspicious+0xfc/0x105
[ 29.804798] [<ffffffff811f4f94>] aa_free_replacedby_kref+0x4d/0x62
[ 29.804804] [<ffffffff811f4f47>] ? aa_put_namespace+0x17/0x17
[ 29.804810] [<ffffffff811f4f0b>] kref_put+0x36/0x40
[ 29.804816] [<ffffffff811f5423>] __replace_profile+0x13a/0x1ed
[ 29.804822] [<ffffffff811f6032>] aa_replace_profiles+0x410/0x57c
[ 29.804829] [<ffffffff811f16d4>] profile_replace+0x35/0x4c
[ 29.804835] [<ffffffff81120fa3>] vfs_write+0xad/0x113
[ 29.804840] [<ffffffff81121609>] SyS_write+0x44/0x7a
[ 29.804847] [<ffffffff8145bfd2>] system_call_fastpath+0x16/0x1b
Reported-by: miles.lane@gmail.com
CC: paulmck@linux.vnet.ibm.com
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
Use the shash interface, rather than the hash interface, when hashing
AppArmor profiles. The shash interface does not use scatterlists and it
is a better fit for what AppArmor needs.
This fixes a kernel paging BUG when aa_calc_profile_hash() is passed a
buffer from vmalloc(). The hash interface requires callers to handle
vmalloc() buffers differently than what AppArmor was doing. Due to
vmalloc() memory not being physically contiguous, each individual page
behind the buffer must be assigned to a scatterlist with sg_set_page()
and then the scatterlist passed to crypto_hash_update().
The shash interface does not have that limitation and allows vmalloc()
and kmalloc() buffers to be handled in the same manner.
BugLink: https://launchpad.net/bugs/1216294/
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=62261
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB driver fixes for 3.12-rc3.
These are all for host controller issues that have been reported, and
there's a fix for an annoying error message that gets printed every
time you remove a USB 3 device from the system that's been bugging me
for a while"
* tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: add support for Merrifield
USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization
USB: Fix breakage in ffs_fs_mount()
fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy
usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit
usb: chipidea: USB_CHIPIDEA should depend on HAS_DMA
usb: chipidea: udc: free pending TD at removal procedure
usb: chipidea: imx: Add usb_phy_shutdown at probe's error path
usb: chipidea: Fix memleak for ci->hw_bank.regmap when removal
usb: chipidea: udc: fix the oops after rmmod gadget
USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd
USB: OHCI: accept very late isochronous URBs
USB: UHCI: accept very late isochronous URBs
USB: iMX21: accept very late isochronous URBs
usbcore: check usb device's state before sending a Set SEL control transfer
xhci: Fix race between ep halt and URB cancellation
usb: Fix xHCI host issues on remote wakeup.
xhci: Ensure a command structure points to the correct trb on the command ring
xhci: Fix oops happening after address device timeout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some serial at tty driver fixes for 3.12-rc3
The serial driver fixes some kref leaks, documentation is moved to the
proper places, and the tty and n_tty fixes resolve some reported
regressions. There is still one outstanding tty regression fix that
isn't in here yet, as I want to test it out some more, it will be sent
for 3.12-rc4 if it checks out"
* tag 'tty-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: ar933x_uart: move devicetree binding documentation
tty: Fix SIGTTOU not sent with tcflush()
n_tty: Fix EOF push index when termios changes
serial: pch_uart: remove unnecessary tty_port_tty_get
serial: pch_uart: fix tty-kref leak in dma-rx path
serial: pch_uart: fix tty-kref leak in rx-error path
serial: tegra: fix tty-kref leak
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some staging driver fixes, MAINTAINER updates, and a new
device id. All of these have been in the linux-next tree, and are
pretty simple patches"
* tag 'staging-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: Add new device ID
staging: imx-drm: Fix probe failure
staging: vt6656: [BUG] iwctl_siwencodeext return if device not open
staging: vt6656: [BUG] main_usb.c oops on device_close move flag earlier.
staging: vt6656: rxtx.c [BUG] s_vGetFreeContext dead lock on null apTD.
Staging: rtl8192u: r819xU_cmdpkt: checking NULL value after doing dev_alloc_skb
staging: usbip: Orphan usbip
staging: r8188eu: Add files for new drive: Cocci spatch "noderef"
staging: r8188eu: Cocci spatch "noderef"
staging: octeon-usb: Cocci spatch "noderef"
staging: r8188eu: Add files for new drive: Cocci spatch "noderef"
MAINTAINERS: staging: dgnc and dgap drivers: add maintainer
staging: lustre: Cocci spatch "noderef"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / sysfs fixes from Greg KH:
"Here are 2 fixes for 3.12-rc3. One fixes a sysfs problem with
mounting caused by 3.12-rc1, and the other is a bug reported by the
chromeos developers with the driver core.
Both have been in linux-next for a bit"
* tag 'driver-core-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core : Fix use after free of dev->parent in device_shutdown
sysfs: Allow mounting without CONFIG_NET
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some HyperV and MEI driver fixes for 3.12-rc3. They resolve
some issues that people have been reporting for them"
* tag 'char-misc-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Drivers: hv: vmbus: Terminate vmbus version negotiation on timeout
Drivers: hv: util: Correctly support ws2008R2 and earlier
mei: cancel stall timers in mei_reset
mei: bus: stop wait for read during cl state transition
mei: make me client counters less error prone
|
|
The previous patch introduces a compile warning by not assigning an initial
value to the "flavor" variable. This could only be a problem if the server
returns a supported secflavor list of length zero, but it's better to
fix this before it's ever hit.
Signed-off-by: Anna Schumaker <bjschuma@netapp.com>
Acked-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Call nfs4_lookup_root_sec for each flavor returned by SECINFO_NO_NAME until
one works.
One example of a situation this fixes:
- server configured for krb5
- server principal somehow gets deleted from KDC
- server still thinking krb is good, sends krb5 as first entry in
SECINFO_NO_NAME response
- client tries krb5, but this fails without even sending an RPC because
gssd's requests to the KDC can't find the server's principal
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
We need to ensure that the initialisation of the data server nfs_client
structure in nfs4_ds_connect is correctly ordered w.r.t. the read of
ds->ds_clp in nfs4_fl_prepare_ds.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
- Fix an Oops when nfs4_ds_connect() returns an error.
- Always check the device status after waiting for a connect to complete.
Reported-by: Andy Adamson <andros@netapp.com>
Reported-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: <stable@vger.kernel.org> # v3.10+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf revert from Ingo Molnar:
"This fixes the 'perf top' regression Markus Trippelsdorf reported"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "perf symbols: Demangle cloned functions"
|
|
Pull drm fixes from Dave Airlie:
"Nothing too major, radeon still has some dpm changes for off by
default.
Radeon, intel, msm:
- radeon: a few more dpm fixes (still off by default), uvd fixes
- i915: runtime warn backtrace and regression fix
- msm: iommu changes fallout"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (27 commits)
drm/msm: use drm_gem_dumb_destroy helper
drm/msm: deal with mach/iommu.h removal
drm/msm: Remove iommu include from mdp4_kms.c
drm/msm: Odd PTR_ERR usage
drm/i915: Fix up usage of SHRINK_STOP
drm/radeon: fix hdmi audio on DCE3.0/3.1 asics
drm/i915: preserve pipe A quirk in i9xx_set_pipeconf
drm/i915/tv: clear adjusted_mode.flags
drm/i915/dp: increase i2c-over-aux retry interval on AUX DEFER
drm/radeon/cik: fix overflow in vram fetch
drm/radeon: add missing hdmi callbacks for rv6xx
drm/i915: Use a temporary va_list for two-pass string handling
drm/radeon/uvd: lower msg&fb buffer requirements on UVD3
drm/radeon: disable tests/benchmarks if accel is disabled
drm/radeon: don't set default clocks for SI when DPM is disabled
drm/radeon/dpm/ci: filter clocks based on voltage/clk dep tables
drm/radeon/dpm/si: filter clocks based on voltage/clk dep tables
drm/radeon/dpm/ni: filter clocks based on voltage/clk dep tables
drm/radeon/dpm/btc: filter clocks based on voltage/clk dep tables
drm/radeon/dpm: fetch the max clk from voltage dep tables helper
...
|
|
This reverts commit de95ab53645a2f0015e0f68ee723f18dce2b8b51.
Markus Trippelsdorf reported that this commit broke 'perf top':
> I just see a gray screen with no text at all. Sometimes the
> following error messages are printed:
>
> *** Error in `perf': invalid fastbin entry (free): 0x00000000029b18c0
> ***
> *** Error in `perf': malloc(): memory corruption (fast): 0x0000000000ee0b10 ***
While this code is fixable, the commit itself fails on several levels:
- it should have been a separate helper function
- why the heck does it do strchr() twice
- it casts a const char * over into char *
- sloppy style
- it's not even a regression fix!
So lets revert it and re-try the patch in v3.13.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://people.freedesktop.org/~robclark/linux into drm-fixes
A small fix + deal with fallout of iommu changes + use new
drm_gem_dumb_destroy helper.
* 'msm-fixes-3.12-rc2' of git://people.freedesktop.org/~robclark/linux:
drm/msm: use drm_gem_dumb_destroy helper
drm/msm: deal with mach/iommu.h removal
drm/msm: Remove iommu include from mdp4_kms.c
drm/msm: Odd PTR_ERR usage
|
|
As mentioned in commit afe4fd062416b ("pkt_sched: fq: Fair Queue packet
scheduler"), this patch adds a new socket option.
SO_MAX_PACING_RATE offers the application the ability to cap the
rate computed by transport layer. Value is in bytes per second.
u32 val = 1000000;
setsockopt(sockfd, SOL_SOCKET, SO_MAX_PACING_RATE, &val, sizeof(val));
To be effectively paced, a flow must use FQ packet scheduler.
Note that a packet scheduler takes into account the headers for its
computations. The effective payload rate depends on MSS and retransmits
if any.
I chose to make this pacing rate a SOL_SOCKET option instead of a
TCP one because this can be used by other protocols.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are no users left, so it's safe to remove.
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We don't need the circular loop there and it's the only current user of
bond_next_slave() - so just use the standard bond_for_each_slave().
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It has no users, so it's safe to remove it completely.
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert all instances of
for (agg = __get_first_agg(); agg; agg = __get_next_port)
to the standard bond_for_each_slave().
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert all instances of
for (agg = __get_first_agg(); agg; agg = __get_next_port)
to the standard bond_for_each_slave(). Also, remove the useless checks
before calling bond_3ad_set_carrier() - if we have something NULL - it
would fire long ago, in __get_first/next_port(), per example.
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently we're relying on suboptimal construct
for (; aggregator; aggregator = __get_next_agg(aggregator)) {
where aggregator is an argument of __get_active_agg() which is _always_ the
first slave's aggregator - judging by all the callers, comments in the
ad_agg_selection_logic() and by logic.
Convert it to use the standard bond_for_each_slave().
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, ad_port_selection_logic() uses
for (aggregator = __get_first_agg(port); aggregator;
aggregator = __get_next_agg(aggregator)) {
construct, however it's suboptimal, difficult to read and understand.
Change it to a standard bond_for_each_slave(), so that we won't need
__get_first/next_agg() and have it more readable.
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently we have only one user of it, so it's kind of useless and just
obfusicates things.
Remove it and move the logic to the only user -
bond_3ad_state_machine_handler().
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently this function is only used in constructs like
for (port = __get_first_port(bond); port; port = __get_next_port(port))
which is basicly the same as
bond_for_each_slave(bond, slave, iter) {
port = &(SLAVE_AD_INFO(slave).port);
but a more time consuming.
Remove the function and convert the users to bond_for_each_slave().
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
