| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC support from Arnd Bergmann:
"These five newly supported chips come with both devicetree
descriptions and the changes to wire them up to the build system for
easier bisection.
The chips in question are:
- Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell
in the product line that started with the Digital StrongARM SA1100
based PDAs and continued with the Intel PXA2xx that dominated early
smartphones. This one only made it only into a few products before
the entire product line was cut in 2015.
- The QiLai SoC is made by RISC-V core designer Andes Technologies
and is in the 'Voyager' reference board in MicroATX form factor. It
uses four in-order AX45MP cores, which is the midrange product from
Andes.
- CIX P1 is one of the few Arm chips designed for small workstations,
and this one uses 12 Cortex-A720/A520 cores, making it also one of
the only ARMv9.2 machines that one can but at the moment.
- Axiado AX3000 is an embedded chip with relative small Cortex-A53
CPU cores described as a "Trusted Control/Compute Unit" that can be
used as a BMC in servers. In addition to the usual I/O, this one
comes with 10GBit ethernet and and a 4TOPS NPU.
- Sophgo SG2000 is an embedded chip that comes with both RISC-V and
Arm cores that can run Linux. This was already supported for RISC-V
but now it also works on Arm
One more chip, the Black Sesame C1200 did not make it in tirm for the
merge window"
* tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: defconfig: Enable rudimentary Sophgo SG2000 support
arm64: Add SOPHGO SOC family Kconfig support
arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
arm64: dts: sophgo: Add Duo Module 01
arm64: dts: sophgo: Add initial SG2000 SoC device tree
MAINTAINERS: Add entry for Axiado
arm64: defconfig: enable the Axiado family
arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
arm64: add Axiado SoC family
dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
dt-bindings: serial: cdns: add Axiado AX3000 UART controller
dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
dt-bindings: gpio: cdns: convert to YAML
dt-bindings: arm: axiado: add AX3000 EVK compatible strings
dt-bindings: vendor-prefixes: Add Axiado Corporation
MAINTAINERS: Add CIX SoC maintainer entry
arm64: dts: cix: Add sky1 base dts initial support
dt-bindings: clock: cix: Add CIX sky1 scmi clock id
arm64: defconfig: Enable CIX SoC
mailbox: add CIX mailbox driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs, and
new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly, the
SoC specific firmware on Tegra and Qualcomm get minor enhancements and
chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes"
* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
bus: del unnecessary init var
soc: fsl: qe: convert set_multiple() to returning an integer
pinctrl: rp1: use new GPIO line value setter callbacks
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
memory: tegra: Add Tegra264 MC and EMC support
firmware: tegra: bpmp: Fix build failure for tegra264-only config
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add bindings for arm,armv7m-nvic, fsl,icoll, fsl,imx23-digctl, Xilinx
INTC, Analog Devices ADT7411, and a bunch of trivial hwmon devices
- Convert fsl,vf610-mscm-ir, fsl,dsu, via,vt8500-timer, nxp,isp1301,
Marvell Armada NETA and BM, apm,xgene1-msi, fsl,mpic-msi,
himax,hx8357d, and sitronix,st7586 bindings to DT schema format
- Fixes for some display bindings
- More indentation clean-ups in examples
- Add more guidelines and clarifications on writing bindings
* tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (31 commits)
dt-bindings: Correct indentation and style in DTS example
dt-bindings: display: mediatek,dp: Allow DisplayPort AUX bus
dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format
dt-bindings: interrupt-controller: Add fsl,icoll.yaml
dt-bindings: interrupt-controller: Add missing Xilinx INTC binding
dt-bindings: display: sprd,sharkl3-dsi-host: Fix missing clocks constraints
dt-bindings: display: sprd,sharkl3-dpu: Fix missing clocks constraints
dt-bindings: display: imx: convert fsl,dcu.txt to yaml format
dt-bindings: timer: via,vt8500-timer: Convert to YAML
dt-bindings: net: Convert Marvell Armada NETA and BM to DT schema
dt-bindings: trivial-devices: Add undocumented hwmon devices
dt-bindings: interrupt-controller: Convert apm,xgene1-msi to DT schema
dt-bindings: gpu: mali-bifrost: Add Allwinner A523 compatible
docs: dt: writing-schema: Document preferred order of properties
docs: dt: writing-bindings: Document discouraged instance IDs
docs: dt: writing-bindings: Document compatible and filename naming
docs: dt: submitting-patches: Avoid 'YAML' in the subject and add an example
MAINTAINERS: adjust file entry in INTEL STRATIX10 FIRMWARE DRIVERS
docs: dt: writing-bindings: Consistently use single-whitespace
docs: dt: writing-bindings: Express better expectations of "specific"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull LICENSES update from Greg KH:
"Here are some small changes to the LICENSES files, removing the
physical address of the FSF as the old one was incorrect and they
finally no longer have that listed in the license files.
These updates come directly from the FSF copies of the files, so they
mirror what they want the files to look like"
* tag 'spdx-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
LICENSES: Replace the obsolete address of the FSF in the GFDL-1.2
LICENSES: Replace the obsolete address of the FSF in the GFDL-1.1
LICENSES: Replace the obsolete address of the FSF in the LGPL-2.1
LICENSES: Replace the obsolete address of the FSF in the LGPL-2.0
LICENSES: Replace the obsolete address of the FSF in the GPL-2.0
LICENSES: Replace the obsolete address of the FSF in the GPL-1.0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates,
no major new features this development cycle. Stuff included in here
is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are
'obviously correct' :)"
* tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (100 commits)
usb: musb: omap2430: clean up probe error handling
usb: musb: omap2430: fix device leak at unbind
usb: gadget: udc: renesas_usb3: fix device leak at unbind
usb: dwc3: meson-g12a: fix device leaks at unbind
usb: dwc3: imx8mp: fix device leak at unbind
usb: musb: omap2430: enable compile testing
usb: gadget: udc: renesas_usb3: drop unused module alias
usb: xhci: print xhci->xhc_state when queue_command failed
usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init()
USB: serial: option: add Foxconn T99W709
usb: core: add urb->sgt parameter description
thunderbolt: Fix copy+paste error in match_service_id()
usb: typec: ucsi: Update power_supply on power role change
usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
usb: typec: fusb302: cache PD RX state
usb: typec: ucsi: yoga-c630: add DRM dependency
usb: gadget : fix use-after-free in composite_dev_cleanup()
usb: chipidea: imx: Add a missing blank line
usb: gadget: f_uac1: replace scnprintf() with sysfs_emit()
usb: usblp: clean up assignment inside if conditions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.17-rc1.
Included in here is the following types of changes:
- another cleanup round from Jiri for the 8250 serial driver and some
other tty drivers, things are slowly getting better with our apis
thanks to this work. This touched many tty drivers all over the
tree.
- qcom_geni_serial driver update for new platforms and devices
- 8250 quirk handling fixups
- dt serial binding updates for different boards/platforms
- other minor cleanups and fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain
serial: 8250: fix panic due to PSLVERR
dt-bindings: serial: samsung: add samsung,exynos2200-uart compatible
vt: defkeymap: Map keycodes above 127 to K_HOLE
vt: keyboard: Don't process Unicode characters in K_OFF mode
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: qcom-geni: move clock-rate logic to separate function
serial: qcom-geni: move resource control logic to separate functions
serial: qcom-geni: move resource initialization to separate function
soc: qcom: geni-se: Enable QUPs on SA8255p Qualcomm platforms
dt-bindings: qcom: geni-se: describe SA8255p
dt-bindings: serial: describe SA8255p
serial: 8250_dw: Fix typo "notifer"
dt-bindings: serial: 8250: spacemit: set clocks property as required
dt-bindings: serial: renesas: Document RZ/V2N SCIF
serial: 8250_ce4100: Fix CONFIG_SERIAL_8250=n build
tty: omit need_resched() before cond_resched()
serial: 8250_ni: Reorder local variables
serial: 8250_ni: Fix build warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging updates from Greg KH:
"Here is the "big" set of staging driver changes for 6.17-rc1. That's
in quotes as it really isn't all that big of a set of changes this
development cycle at all.
Major things that stand out are:
- gpib cleanups and tweaks with the majority of the big issues now
taken care of. Odds are it will move out of staging/ in the next
merge window if all goes well.
- more constant cleanups and layer removals from the rtl8723bs
driver. It's amazing how many layers deep they really are, all
cleanups here are great to see
- axis-fifo sysfs api removed and debugfs api added. The sysfs api
didn't work at all so obviously no one was using it. Add the same
information into debugfs as that's the proper place for it, and
make it actually work.
- Remaining changes is lots of small checkpatch cleanups, most of
which seem to have come from a Debconf session where people were
encouraged to submit their first kernel patch, a nice thing to see
happen again.
All of these have been in linux-next with no reported issues"
* tag 'staging-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (71 commits)
staging: rtl8723bs: remove redundant semicolon in basic_types.h
staging: gpib: Add init response codes for new ni-usb-hs+
staging: rtl8723bs: DoIQK_8723B is empty
staging: rtl8723bs: dm_CheckStatistics is empty
staging: rtl8723bs: hw_var_port_switch is empty
staging: rtl8723bs: _InitOtherVariable is empty
staging: rtl8723bs: rtw_get_encrypt_decrypt_from_registrypriv is empty
staging: rtl8723bs: rtl8723b_set_FwAoacRsvdPage_cmd is empty
staging: rtl8723bs: CheckFwRsvdPageContent is empty
staging: rtl8723bs: clean up redundant & parentheses
staging: axis-fifo: add debugfs interface for dumping fifo registers
staging: axis-fifo: remove sysfs interface
staging: nvec: Fix incorrect null termination of battery manufacturer
staging: gpib: fix typo
staging: sm750fb: fix CamelCase variable naming
staging: vme_user: fix spelling errors
staging: rtl8723bs: remove unnecessary braces in rtl8723b_cmd
staging: rtl8723bs: remove unnecessary commented code
staging: rtl8723bs: add missing blank line after declaration
staging: rtl8723bs: remove unnecessary comment separator lines
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Support ECC in chromeos_pstore
- Allow to control power and data role via sysfs in cros_ec_typec
Improvements:
- Defer probe when the dependencies are not ready in cros_ec_typec
- Retry when a sensor is not ready in cros_ec_sensorhub
Fixes:
- Unregister the blocking notifier as well when unregistering the
struct cros_ec_device.
Cleanups:
- Remove redundant code and leverage more suitable helper macro in
chromeos_laptop
- Fix typo"
* tag 'chrome-platform-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Fix typo in CROS_USBPD_NOTIFY help text
platform/chrome: cros_ec_typec: Check ec platform device pointer
platform/chrome: cros_ec: Unregister notifier in cros_ec_unregister()
platform/chrome: cros_ec_typec: Add role swap ops
platform/chrome: chromeos_laptop: Replace open coded variant of DEFINE_RES_IRQ()
platform/chrome: chromeos_laptop: Remove duplicate check
platform/chrome: cros_ec_sensorhub: Retries when a sensor is not ready
platform/chrome: chromeos_pstore: Add ecc_size module parameter
platform/chrome: cros_ec_typec: Defer probe on missing EC parent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers from Ilpo Järvinen:
- alienware: Add more precise labels to fans
- amd/hsmp: Improve misleading probe errors (make the legacy driver
aware when HSMP is supported through the ACPI driver)
- amd/pmc: Add Lenovo Yoga 6 13ALCL6 to pmc quirk list
- drm/xe: Correct (D)VSEC information to support PMT crashlog feature
- fujitsu: Clamp charge threshold instead of returning an error
- ideapad: Expore change types
- intel/pmt:
- Add PMT Discovery driver
- Add API to retrieve telemetry regions by feature
- Fix crashlog NULL access
- Support Battlemage GPU (BMG) crashlog
- intel/vsec:
- Add Discovery feature
- Add feature dependency support using device links
- lenovo:
- Move lenovo drivers under drivers/platform/x86/lenovo/
- Add WMI drivers for Lenovo Gaming series
- Improve DMI handling
- oxpec:
- Add support for OneXPlayer X1 Mini Pro (Strix Point variant)
- Fix EC registers for G1 AMD
- samsung-laptop: Expose change types
- wmi: Fix WMI device naming issue (same GUID corner cases)
- x86-android-tables: Add ovc-capacity-table to generic battery nodes
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
platform/x86: oxpec: Add support for OneXPlayer X1 Mini Pro (Strix Point)
platform/x86: oxpec: Fix turbo register for G1 AMD
platform/x86/intel/pmt: support BMG crashlog
platform/x86/intel/pmt: use a version struct
platform/x86/intel/pmt: refactor base parameter
platform/x86/intel/pmt: add register access helpers
platform/x86/intel/pmt: decouple sysfs and namespace
platform/x86/intel/pmt: correct types
platform/x86/intel/pmt: re-order trigger logic
platform/x86/intel/pmt: use guard(mutex)
platform/x86/intel/pmt: mutex clean up
platform/x86/intel/pmt: white space cleanup
drm/xe: Correct BMG VSEC header sizing
drm/xe: Correct the rev value for the DVSEC entries
platform/x86/intel/pmt: fix a crashlog NULL pointer access
platform/x86: samsung-laptop: Expose charge_types
platform/x86/amd: pmc: Add Lenovo Yoga 6 13ALC6 to pmc quirk list
platform/x86: dell-uart-backlight: Use blacklight power constant
platform/x86/intel/pmt: fix build dependency for kunit test
platform/x86: lenovo: gamezone needs "other mode"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"Apart from the usual mix of new drivers (pwm-argon-fan-hat), adding
support for variants to existing drivers, minor improvements to both
drivers and docs, device tree documenation updates, the noteworthy
changes are:
- A hwmon companion driver to pwm-mc33xs2410 living in drivers/hwmon
and acked by Guenter Roeck
- chardev support for PWM devices. This leverages atomic PWM updates
to userspace and at the same time simplifies and accelerates PWM
configuration changes"
* tag 'pwm/for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (35 commits)
pwm: raspberrypi-poe: Fix spelling mistake "Firwmware" -> "Firmware"
hwmon: add support for MC33XS2410 hardware monitoring
pwm: mc33xs2410: add hwmon support
pwm: img: Remove redundant pm_runtime_mark_last_busy() calls
pwm: Expose PWM_WFHWSIZE in public header
dt-bindings: pwm: Convert lpc32xx-pwm.txt to yaml format
docs: pwm: Adapt Locking paragraph to reality
pwm: twl-led: Drop driver local locking
pwm: sun4i: Drop driver local locking
pwm: sti: Drop driver local locking
pwm: microchip-core: Drop driver local locking
pwm: lpc18xx-sct: Drop driver local locking
pwm: fsl-ftm: Drop driver local locking
pwm: clps711x: Drop driver local locking
pwm: atmel: Drop driver local locking
pwm: argon-fan-hat: Add Argon40 Fan HAT support
dt-bindings: pwm: argon40,fan-hat: Document Argon40 Fan HAT
dt-bindings: vendor-prefixes: Document Argon40
pwm: pwm-mediatek: Add support for PWM IP V3.0.2 in MT6991/MT8196
pwm: pwm-mediatek: Pass PWM_CK_26M_SEL from platform data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release is almost entirely driver work, mostly new drivers with
the usual smattering of per driver updates anf fixes, with only
trivial changes in the core. Highlights include:
- Quite a bit of maintainence work on the STM32 and Qualcomm drivers
- Usage of the newly added devm_dma_request_chan() in the ateml
driver, pulling in the relevant dmaengine change
- Cleanups of our usage of the PM autosuspend functions, this pulls
in some PM core changes on a shared tag
- Support for ADI sigma-delta triggers, Amlogic SPISG, Mediatek
MT6991 and MT8196, Renesas RZ/V2H(P) and SOPHGO SG2042"
* tag 'spi-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (62 commits)
spi: SPISG: Fix less than zero comparison on a u32 variable
spi: intel: Allow writeable MTD partition with module param
spi: Add driver for the RZ/V2H(P) RSPI IP
spi: dt-bindings: Document the RZ/V2H(P) RSPI
MAINTAINERS: Add an entry for Amlogic spi driver
spi: Add Amlogic SPISG driver
spi: dt-bindings: Add binding document of Amlogic SPISG controller
spi: spi-sg2044-nor: Add SPI-NOR controller for SG2042
spi: spi-sg2044-nor: Add configurable chip_info
spi: dt-bindings: spi-sg2044-nor: Change SOPHGO SG2042
spi: spi-qpic-snand: simplify bad block marker duplication
spi: spidev: Add an entry for the ABB spi sensors
dt-bindings: trivial-devices: Document ABB sensors
spi: stm32-ospi: Fix NULL vs IS_ERR() bug in stm32_ospi_get_resources()
spi: gpio: Use explicit 'unsigned int' for parameter types
spi: dt-bindings: spi-mux: Drop "spi-max-frequency" as required
spi: st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
spi: rspi: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
spi: sh-msiof: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
spi: xilinx: Fix block comment style and minor cleanups
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The big change in this release is the addition of Rust bindings from
Daniel Almeida, allowing fairly basic consumer use with support for
enable and voltage setting operations. This should be good for the
vast majority of consumers.
Otherwise it's been quite quiet, a few new devices supported, plus
some cleanups and fixes.
Summary:
- Basic Rust bindings
- A fix for making large voltage changes on regulators where we limit
the size of voltage change we will do in one step, previously we
just got as close as we could in one step
- Cleanups of our usage of the PM autosuspend functions, this pulls
in some PM core changes on a shared tag
- Mode setting support for PCA9450
- Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and
PMR735B, Raspberry Pi displays and TI TPS652G1
The TI driver pulls in the MFD portion of the support for the device
and the pinctrl driver which was in the same tag"
* tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits)
regulator: mt6370: Fix spelling mistake in mt6370_regualtor_register
regulator: Kconfig: Fix spelling mistake "regualtor" -> "regulator"
regulator: core: repeat voltage setting request for stepped regulators
regulator: rt6160: Add rt6166 vout min_uV setting for compatible
MAINTAINERS: add regulator.rs to the regulator API entry
rust: regulator: add a bare minimum regulator abstraction
regulator: tps6286x-regulator: Fix a copy & paste error
regulator: qcom-rpmh: add support for pm7550 regulators
regulator: qcom-rpmh: add support for pmr735b regulators
regulator: dt-bindings: qcom,rpmh: Add PMR735B compatible
regulator: dt-bindings: qcom,rpmh: Add PM7550 compatible
regulator: tps6594-regulator: Add TI TPS652G1 PMIC regulators
regulator: tps6594-regulator: refactor variant descriptions
regulator: tps6594-regulator: remove hardcoded buck config
regulator: tps6594-regulator: remove interrupt_count
dt-bindings: mfd: ti,tps6594: Add TI TPS652G1 PMIC
pinctrl: pinctrl-tps6594: Add TPS652G1 PMIC pinctrl and GPIO
misc: tps6594-pfsm: Add TI TPS652G1 PMIC PFSM
mfd: tps6594: Add TI TPS652G1 support
regulator: sy8827n: make enable gpio NONEXCLUSIVE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"A very quiet release for regmap this time, just two cleanup patches
and one almost cleanup patch which saves individual MMIO regmaps
flagging themselves as having fast I/O"
* tag 'regmap-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Annotate that MMIO implies fast IO
regmap: get rid of redundant debugfs_file_{get,put}()
regmap: kunit: Constify regmap_range_cfg array
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"One new driver and a small set of improvements as well as a fix to
power sequence unit naming.
New driver:
- add a power sequencing driver for the T-HEAD TH1520 GPU
Power sequencing core improvements:
- allow to compile the pwrseq drivers with COMPILE_TEST=y in order to
improve the build-test coverage
- add named defines for the possible return values of the .match()
callback and use it in the existing drivers instead of magic values
Fix:
- Fix the name of the bluetooth-enable unit for WCN6855"
* tag 'pwrseq-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: fix bluetooth-wifi copypasta for WCN6855
power: sequencing: thead-gpu: use new defines for match() return values
power: sequencing: qcom-wcn: use new defines for match() return values
power: sequencing: add defines for return values of the match() callback
power: sequencing: extend build coverage with COMPILE_TEST=y
power: sequencing: thead-gpu: add missing header
power: sequencing: Add T-HEAD TH1520 GPU power sequencer driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver (Apple SMC) and extensions to existing drivers
for supporting new HW models. A lot of different impovements across
drivers and in core GPIO code. Details on that are in the signed tag
as usual.
We managed to remove some of the legacy APIs. Arnd Bergmann started to
work on making the legacy bits optional so that we may compile them
only for older platforms that still really need them.
Rob Herring has done a lot of work to convert legacy .txt dt-bindings
for GPIO controllers to YAML. There are only a few left now in the
GPIO tree.
A big part of the commits in this PR concern the conversion of GPIO
drivers to using the new line value setter callbacks. This conversion
is now complete treewide (unless I've missed something) and once all
the changes from different trees land in mainline, I'll send you
another PR containing a commit dropping the legacy callbacks from the
tree.
As the quest to pay back technical dept never really ends, we're
starting another set of interface conversions, this time it's about
moving fields specific to only a handful of drivers using the
gpio-mmio helper out of the core gpio_chip structure that every
controller implements and uses. This cycle we introduce a new set of
APIs and convert a few drivers under drivers/gpio/, next cycle we'll
convert remaining modules treewide (in gpio, pinctrl and mfd trees)
and finally remove the old interfaces and move the gpio-mmio fields
into their own structure wrapping gpio_chip.
One last change I should mention here is the rework of the sysfs
interface. In 2016, we introduced the GPIO character device as the
preferred alternative to the sysfs class under /sys/class/gpio. While
it has seen a wide adoption with the help of its user-space
counterpart - libgpiod - there are still users who prefer the
simplicity of sysfs.
As far as the GPIO subsystem is concerned, the problem is not the
existince of the GPIO class as such but rather the fact that it
exposes the global GPIO numbers to the user-space, stopping us from
ever being able to remove the numberspace from the kernel. To that
end, this release we introduced a parallel, limited sysfs interface
that doesn't expose these numbers and only implements a subset of
features that are relevant to the existing users. This is a result of
several discussions over the course of last year and should allow us
to remove the legacy part some time in the future.
Summary:
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose
the global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the
existing interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more
users
- start the process of allowing to compile-out the legacy parts of
the GPIO core for users who don't need it by introducing a new
Kconfig option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio
helper out of the core struct gpio_chip into their own structure
that wraps it: create a new header with modern interfaces and
convert several drivers to using it
- remove the platform data structure associated with the gpio-mmio
helper from the kernel after having converted all remaining users
to generic device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value
setter callbacks
- convert gpio-rcar to using simple device power management ops
callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already
handles that
- also drop unneeded GPIO range checks in drivers, the core already
makes sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the
user wants to change direction of the pin to output even though
these drivers don't need to do anything else to actually set the
direction, otherwise a call like gpiod_direction_output(d, 1) will
not result in the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases
where the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in
gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different
devices to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of
simple hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the
arguments in some functions, remove duplicate includes, etc.
- documentation updates"
* tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits)
MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips
gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB
gpio: virtio: Fix config space reading.
gpiolib: make legacy interfaces optional
dt-bindings: gpio: rockchip: Allow use of a power-domain
gpiolib: of: add forward declaration for struct device_node
power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC
gpio: Add new gpio-macsmc driver for Apple Macs
mfd: Add Apple Silicon System Management Controller
soc: apple: rtkit: Make shmem_destroy optional
dt-bindings: mfd: Add Apple Mac System Management Controller
dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller
dt-bindings: gpio: Add Apple Mac SMC GPIO block
gpio: cadence: Remove duplicated include in gpio-cadence.c
gpio: tps65219: Add support for TI TPS65214 PMIC
gpio: tps65219: Update _IDX & _OFFSET macro prefix
gpio: sysfs: Fix an end of loop test in gpiod_unexport()
dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema
dt-bindings: gpio: Convert maxim,max3191x to DT schema
dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This includes lots of file shuffling due to HD-audio code
reorganization and many trivial changes, but otherwise there shouldn't
be much surprise from the functionality POV. The PR includes the PM
changes as prerequisite, too. Some highlights below:
Core:
- Performance optimizations in PCM core code
- Refactoring of ASoC Kconfig menus to be hopefully more consistant
and easier to navigate.
- Refactoring of ASoC DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers
HD-audio reorganization:
- All code are moved under sound/hda with a bit more understandable
tree structure, as well as file renames
- The huge Realtek driver code is split to several parts, a common
helper module with driver modules per probe entry
- HDMI and Cirrus codec drivers also split
ASoC:
- Further work on the generic handling for SoundWire SDCA devices
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI
TAS5753
HD-audio and USB-audio:
- TAS2781 driver cleanup and TAS2770 support
- EQ enablement in CA0132 driver
- USB audio quirk code cleanups
Others:
- Cleanups of PM autosuspend call patterns with the update from the
PM tree
- Lots of strcpy() -> strscpy() conversions for fixed size arrays"
* tag 'sound-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (385 commits)
ALSA: hda: Add TAS2770 support
ASoC: qcom: sm8250: Add Fairphone 4 soundcard compatible
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 4 sound card
ASoC: dt-bindings: qcom,q6afe: Document q6usb subnode
ASoC: SDCA: Fix implicit cast from le16
ASoC: SDCA: Shrink detected_mode_handler() stack frame
ASoC: SDCA: Check devm_mutex_init() return value
ASoC: SDCA: add route by the number of input pins in MU entity
ALSA: hda/realtek: Add support for ASUS Commercial laptops using CS35L41 HDA
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for PTL.
ASoC: codec: tlv320aic32x4: Fix reset GPIO check
ASoC: dt-bindings: qcom,lpass-va-macro: Define clock-names in top-level
ASoC: SDCA: Add hw_params() helper function
ASoC: SDCA: Add a helper to get the SoundWire port number
ASoC: SDCA: Add helper to add DAI constraints
ASoC: soc-dai: Add private data to snd_soc_dai
ASoC: SDCA: Move SDCA search functions and export
ASoC: SDCA: Remove overly chatty input pin list warning
ASoC: SDCA: Allow read-only controls to be deferrable
ASoC: SDCA: Update memory allocations to zero initialise
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These update the thermal control sysfs interface and multiple thermal
control drivers:
- Convert EAGAIN into ENODATA in temp_show() to prevent user space
from polling the sysfs file in vain after a failing O_NONBLOCK read
under the assumption that the read would have blocked (Hsin-Te
Yuan)
- Add Wildcat Lake PCI ID to the int340x Intel processor thermal
driver (Srinivas Pandruvada)
- Add debugfs interface to override the temperature set by the
firmware in the Intel platform temperature control (PTC) interface
and add a new sysfs control attribute called thermal_tolerance to
it (Srinivas Pandruvada)
- Enable the stage 2 shutdown in the qcom-spmi-temp-alarm thermal
driver and add support for more SPMI variants to it (Anjelique
Melendez)
- Constify the thermal_zone_device_ops structure where possible in
several assorted thermal drivers (Christophe Jaillet)
- Use the dev_fwnode() helper instead of of_fwnode_handle(), as it is
more adequate, wherever possible in thermal drivers (Jiri Slaby)
- Implement and document One-Time Programmable fuse support in the
Rockchip thermal driver in order to increase the precision of the
measurements (Nicolas Frattaroli)
- Change the way the Mediatek LTVS thermal driver stores the
initialization data sequence to support different sequences
matching different platforms. Introduce mt7988 support with a new
initialization sequence (Mason Chang)
- Document the QCom TSens Milos Temperature Sensor DT bindings (Luca
Weiss)
- Add the fallback compatible string for MT7981 and MT8516 DT
bindings (Aleksander Jan Bajkowski)
- Add the compatible string for the Tegra210B01 SOC_THERM driver
(Aaron Kling)"
* tag 'thermal-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
dt-bindings: thermal: tegra: Document Tegra210B01
dt-bindings: thermal: mediatek: Add fallback compatible string for MT7981 and MT8516
dt-bindings: thermal: qcom-tsens: document the Milos Temperature Sensor
thermal/drivers/mediatek/lvts_thermal: Add mt7988 lvts commands
thermal/drivers/mediatek/lvts_thermal: Add lvts commands and their sizes to driver data
thermal/drivers/mediatek/lvts_thermal: Change lvts commands array to static const
thermal/drivers/rockchip: Support reading trim values from OTP
dt-bindings: thermal: rockchip: document otp thermal trim
thermal/drivers/rockchip: Support RK3576 SoC in the thermal driver
dt-bindings: rockchip-thermal: Add RK3576 compatible
thermal/drivers/rockchip: Rename rk_tsadcv3_tshut_mode
thermal: Use dev_fwnode()
thermal: Constify struct thermal_zone_device_ops
thermal/drivers/loongson2: Constify struct thermal_zone_device_ops
thermal/drivers/qcom-spmi-temp-alarm: Add support for LITE PMIC peripherals
thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 2 PMIC peripherals
thermal/drivers/qcom-spmi-temp-alarm: Prepare to support additional Temp Alarm subtypes
thermal/drivers/qcom-spmi-temp-alarm: Add temp alarm data struct based on HW subtype
thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
thermal: sysfs: Return ENODATA instead of EAGAIN for reads
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update APEI (new EINJv2 error injection, assorted fixes), fix
the ACPI processor driver, update the legacy ACPI /proc interface
(multiple assorted fixes of minor issues) and several assorted ACPI
drivers (minor fixes and cleanups):
- Printing the address in acpi_ex_trace_point() is either incorrect
during early kernel boot or not really useful later when pathnames
resolve properly, so stop doing it (Mario Limonciello)
- Address several minor issues in the legacy ACPI proc interface
(Andy Shevchenko)
- Fix acpi_object union initialization in the ACPI processor driver
to avoid using memory that contains leftover data (Sebastian Ott)
- Make the ACPI processor perflib driver take the initial _PPC limit
into account as appropriate (Jiayi Li)
- Fix message formatting in the ACPI processor throttling driver and
in the ACPI PCI link driver (Colin Ian King)
- Clean up general ACPI PM domain handling (Rafael Wysocki)
- Fix iomem-related sparse warnings in the APEI EINJ driver (Zaid
Alali, Tony Luck)
- Add EINJv2 error injection support to the APEI EINJ driver (Zaid
Alali)
- Fix memory corruption in error_type_set() in the APEI EINJ driver
(Dan Carpenter)
- Fix less than zero comparison on a size_t variable in the APEI EINJ
driver (Colin Ian King)
- Fix check and iounmap of an uninitialized pointer in the APEI EINJ
driver (Colin Ian King)
- Add TAINT_MACHINE_CHECK to the GHES panic path in APEI to improve
diagnostics and post-mortem analysis (Breno Leitao)
- Update APEI reviewer records and other ACPI-related information in
MAINTAINERS as well as the contact information in the ACPI ABI
documentation (Rafael Wysocki)
- Fix the handling of synchronous uncorrected memory errors in APEI
(Shuai Xue)
- Remove an AudioDSP-related ID from the ACPI LPSS driver (Andy
Shevchenko)
- Replace sprintf()/scnprintf() with sysfs_emit() in the ACPI fan
driver and update a debug message in fan_get_state_acpi4() (Eslam
Khafagy, Abdelrahman Fekry, Sumeet Pawnikar)
- Add Intel Wildcat Lake support to the ACPI DPTF driver (Srinivas
Pandruvada)
- Add more debug information regarding failing firmware updates to
the ACPI pfr_update driver (Chen Yu)
- Reduce the verbosity of the ACPI PRM (platform runtime mechanism)
driver to avoid user confusion (Zhu Qiyu)
- Replace sprintf() with sysfs_emit() in the ACPI TAD (time and alarm
device) driver (Sukrut Heroorkar)
- Enable CONFIG_ACPI_DEBUG by default to make it easier to get ACPI
debug messages from OEM platforms (Mario Limonciello)
- Fix parent device references in ASL examples in the ACPI
documentation and fix spelling and style in the gpio-properties
documentation in firmware-guide (Andy Shevchenko)
- Fix typos in ACPI documentation and comments (Bjorn Helgaas)"
* tag 'acpi-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
ACPI: Fix typos
ACPI/PCI: Remove space before newline
ACPI: processor: throttling: Remove space before newline
ACPI: processor: perflib: Fix initial _PPC limit application
ACPI/PNP: Use my kernel.org address in MAINTAINERS and ABI docs
ACPI: TAD: Replace sprintf() with sysfs_emit()
ACPI: APEI: handle synchronous exceptions in task work
ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
ACPI: APEI: MAINTAINERS: Update reviewers for APEI
Documentation: ACPI: Fix parent device references
ACPI: fan: Update debug message in fan_get_state_acpi4()
ACPI: PRM: Reduce unnecessary printing to avoid user confusion
ACPI: fan: Replace sprintf() with sysfs_emit()
ACPI: APEI: EINJ: Fix trigger actions
ACPI: processor: fix acpi_object initialization
ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
ACPI: LPSS: Remove AudioDSP related ID
Documentation: firmware-guide: gpio-properties: Spelling and style fixes
ACPI: fan: Replace sprintf()/scnprintf() with sysfs_emit() in show() functions
ACPI: PM: Set .detach in acpi_general_pm_domain definition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"As is tradition, cpufreq is the part with the largest number of
updates that include core fixes and cleanups as well as updates of
several assorted drivers, but there are also quite a few updates
related to system sleep, mostly focused on asynchronous suspend and
resume of devices and on making the integration of system suspend
and resume with runtime PM easier.
Runtime PM is also updated to allow some code duplication in drivers
to be eliminated going forward and to work more consistently overall
in some cases.
Apart from that, there are some driver core updates related to PM
domains that should help to address ordering issues with devm_ cleanup
routines relying on PM domains, some assorted devfreq updates
including core fixes and cleanups, tooling updates, and documentation
and MAINTAINERS updates.
Specifics:
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron
Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix
MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
(Prashant Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT
cpuidle driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the
device suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in
the runtime PM framework and update its documentation (Sakari
Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power
capping driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You
Use) principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make
the driver core detach PM domains in device_unbind_cleanup(), and
drop the dev_pm_domain_detach() call from the platform bus type
(Claudiu Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
Shenoy)"
* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
PM: docs: Use my kernel.org address in ABI docs and DT bindings
PM: hibernate: Fix up white space that does not follow coding style
PM: sleep: Rearrange suspend/resume error handling in the core
Documentation: amd-pstate:fix minimum performance state label error
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
kexec_core: Drop redundant pm_restore_gfp_mask() call
kexec_core: Fix error code path in the KEXEC_JUMP flow
PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
drivers: cpufreq: add Tegra114 support
rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
cpufreq: Exit governor when failed to start old governor
cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
cpufreq: Init policy->rwsem before it may be possibly used
cpufreq: Initialize cpufreq-based frequency-invariance later
cpufreq: Remove duplicate check in __cpufreq_offline()
cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
PM / devfreq: Add HiSilicon uncore frequency scaling driver
...
|
|
'bpf-show-precise-rejected-function-when-attaching-to-__noreturn-and-deny-list-functions'
KaFai Wan says:
====================
bpf: Show precise rejected function when attaching to __noreturn and deny list functions
Show precise rejected function when attaching fexit/fmod_ret to __noreturn
functions.
Add log for attaching tracing programs to functions in deny list.
Add selftest for attaching tracing programs to functions in deny list.
Migrate fexit_noreturns case into tracing_failure test suite.
changes:
v4:
- change tracing_deny case attaching function (Yonghong Song)
- add Acked-by: Yafang Shao and Yonghong Song
v3:
- add tracing_deny case into existing files (Alexei)
- migrate fexit_noreturns into tracing_failure
- change SOB
https://lore.kernel.org/bpf/20250722153434.20571-1-kafai.wan@linux.dev/
v2:
- change verifier log message (Alexei)
- add missing Suggested-by
https://lore.kernel.org/bpf/20250714120408.1627128-1-mannkafai@gmail.com/
v1:
https://lore.kernel.org/all/20250710162717.3808020-1-mannkafai@gmail.com/
---
====================
Link: https://patch.msgid.link/20250724151454.499040-1-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Delete fexit_noreturns.c files and migrate the cases into
tracing_failure.c files.
The result:
$ tools/testing/selftests/bpf/test_progs -t tracing_failure/fexit_noreturns
#467/4 tracing_failure/fexit_noreturns:OK
#467 tracing_failure:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250724151454.499040-5-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
deny list
The result:
$ tools/testing/selftests/bpf/test_progs -t tracing_failure/tracing_deny
#468/3 tracing_failure/tracing_deny:OK
#468 tracing_failure:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250724151454.499040-4-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Show the rejected function name when attaching tracing programs to
functions in deny list.
With this change, we know why tracing programs can't attach to functions
like __rcu_read_lock() from log.
$ ./fentry
libbpf: prog '__rcu_read_lock': BPF program load failed: -EINVAL
libbpf: prog '__rcu_read_lock': -- BEGIN PROG LOAD LOG --
Attaching tracing programs to function '__rcu_read_lock' is rejected.
Suggested-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250724151454.499040-3-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
__noreturn functions
With this change, we know the precise rejected function name when
attaching fexit/fmod_ret to __noreturn functions from log.
$ ./fexit
libbpf: prog 'fexit': BPF program load failed: -EINVAL
libbpf: prog 'fexit': -- BEGIN PROG LOAD LOG --
Attaching fexit/fmod_ret to __noreturn function 'do_exit' is rejected.
Suggested-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250724151454.499040-2-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock update from Mickaël Salaün:
"Fix test issues, improve build compatibility, and add new tests"
* tag 'landlock-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Fix cosmetic change
samples/landlock: Fix building on musl libc
landlock: Fix warning from KUnit tests
selftests/landlock: Add test to check rule tied to covered mount point
selftests/landlock: Fix build of audit_test
selftests/landlock: Fix readlink check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit update from Paul Moore:
"A single audit patch that restores logging of an audit event in the
module load failure case"
* tag 'audit-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit,module: restore audit logging in load failure case
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Introduce the concept of a SELinux "neveraudit" type which prevents
all auditing of the given type/domain.
Taken by itself, the benefit of marking a SELinux domain with the
"neveraudit" tag is likely not very interesting, especially given the
significant overlap with the "dontaudit" tag.
However, given that the "neveraudit" tag applies to *all* auditing of
the tagged domain, we can do some fairly interesting optimizations
when a SELinux domain is marked as both "permissive" and "dontaudit"
(think of the unconfined_t domain).
While this pull request includes optimized inode permission and
getattr hooks, these optimizations require SELinux policy changes,
therefore the improvements may not be visible on standard downstream
Linux distos for a period of time.
- Continue the deprecation process of /sys/fs/selinux/user.
After removing the associated userspace code in 2020, we marked the
/sys/fs/selinux/user interface as deprecated in Linux v6.13 with
pr_warn() and the usual documention update.
This adds a five second sleep after the pr_warn(), following a
previous deprecation process pattern that has worked well for us in
the past in helping identify any existing users that we haven't yet
reached.
- Add a __GFP_NOWARN flag to our initial hash table allocation.
Fuzzers such a syzbot often attempt abnormally large SELinux policy
loads, which the SELinux code gracefully handles by checking for
allocation failures, but not before the allocator emits a warning
which causes the automated fuzzing to flag this as an error and
report it to the list. While we want to continue to support the work
done by the fuzzing teams, we want to focus on proper issues and not
an error case that is already handled safely. Add a NOWARN flag to
quiet the allocator and prevent syzbot from tripping on this again.
- Remove some unnecessary selinuxfs cleanup code, courtesy of Al.
- Update the SELinux in-kernel documentation with pointers to
additional information.
* tag 'selinux-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: don't bother with selinuxfs_info_free() on failures
selinux: add __GFP_NOWARN to hashtab_init() allocations
selinux: optimize selinux_inode_getattr/permission() based on neveraudit|permissive
selinux: introduce neveraudit types
documentation: add links to SELinux resources
selinux: add a 5 second sleep to /sys/fs/selinux/user
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Add Nicolas Bouchinet and Xiu Jianfeng as Lockdown maintainers
The Lockdown LSM has been without a dedicated mantainer since its
original acceptance upstream, and it has suffered as a result.
Thankfully we have two new volunteers who together I believe have the
background and desire to help ensure Lockdown is properly supported.
- Remove the unused cap_mmap_file() declaration
* tag 'lsm-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
MAINTAINERS: Add Xiu and myself as Lockdown maintainers
security: Remove unused declaration cap_mmap_file()
lsm: trivial comment fix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Quite a few commits but nothing really that would be worth of spending
too much time for, or would want to emphasize in particular"
* tag 'tpmdd-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb_ffa: handle tpm busy return code
tpm_crb_ffa: Remove memset usage
tpm_crb_ffa: Fix typos in function name
tpm: Check for completion after timeout
tpm: Use of_reserved_mem_region_to_resource() for "memory-region"
tpm: Replace scnprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show functions
tpm_crb_ffa: Remove unused export
tpm: tpm_crb_ffa: try to probe tpm_crb_ffa when it's built-in
firmware: arm_ffa: Change initcall level of ffa_init() to rootfs_initcall
tpm/tpm_svsm: support TPM_CHIP_FLAG_SYNC
tpm/tpm_ftpm_tee: support TPM_CHIP_FLAG_SYNC
tpm: support devices with synchronous send()
tpm: add bufsiz parameter in the .send callback
|
|
Pull fscrypt updates from Eric Biggers:
"Simplify how fscrypt uses the crypto API, resulting in some
significant performance improvements:
- Drop the incomplete and problematic support for asynchronous
algorithms. These drivers are bug-prone, and it turns out they are
actually much slower than the CPU-based code as well.
- Allocate crypto requests on the stack instead of the heap. This
improves encryption and decryption performance, especially for
filenames. This also eliminates a point of failure during I/O"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
ceph: Remove gfp_t argument from ceph_fscrypt_encrypt_*()
fscrypt: Remove gfp_t argument from fscrypt_encrypt_block_inplace()
fscrypt: Remove gfp_t argument from fscrypt_crypt_data_unit()
fscrypt: Switch to sync_skcipher and on-stack requests
fscrypt: Drop FORBID_WEAK_KEYS flag for AES-ECB
fscrypt: Don't use asynchronous CryptoAPI algorithms
fscrypt: Don't use problematic non-inline crypto engines
fscrypt: Drop obsolete recommendation to enable optimized SHA-512
fscrypt: Explicitly include <linux/export.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library conversions from Eric Biggers:
"Convert fsverity and apparmor to use the SHA-2 library functions
instead of crypto_shash. This is simpler and also slightly faster"
* tag 'libcrypto-conversions-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
fsverity: Switch from crypto_shash to SHA-2 library
fsverity: Explicitly include <linux/export.h>
apparmor: use SHA-256 library API instead of crypto_shash API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library test updates from Eric Biggers:
"Add KUnit test suites for the Poly1305, SHA-1, SHA-224, SHA-256,
SHA-384, and SHA-512 library functions.
These are the first KUnit tests for lib/crypto/. So in addition to
being useful tests for these specific algorithms, they also establish
some conventions for lib/crypto/ testing going forwards.
The new tests are fairly comprehensive: more comprehensive than the
generic crypto infrastructure's tests. They use a variety of
techniques to check for the types of implementation bugs that tend to
occur in the real world, rather than just naively checking some test
vectors. (Interestingly, poly1305_kunit found a bug in QEMU)
The core test logic is shared by all six algorithms, rather than being
duplicated for each algorithm.
Each algorithm's test suite also optionally includes a benchmark"
* tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: tests: Annotate worker to be on stack
lib/crypto: tests: Add KUnit tests for SHA-1 and HMAC-SHA1
lib/crypto: tests: Add KUnit tests for Poly1305
lib/crypto: tests: Add KUnit tests for SHA-384 and SHA-512
lib/crypto: tests: Add KUnit tests for SHA-224 and SHA-256
lib/crypto: tests: Add hash-test-template.h and gen-hash-testvecs.py
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Link: https://lore.kernel.org/r/20250107131456.247610-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250725100241.120106-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
When gmin_get_config_var() calls efi.get_variable() and the EFI variable
is larger than the expected buffer size, two behaviors combine to create
a stack buffer overflow:
1. gmin_get_config_var() does not return the proper error code when
efi.get_variable() fails. It returns the stale 'ret' value from
earlier operations instead of indicating the EFI failure.
2. When efi.get_variable() returns EFI_BUFFER_TOO_SMALL, it updates
*out_len to the required buffer size but writes no data to the output
buffer. However, due to bug #1, gmin_get_var_int() believes the call
succeeded.
The caller gmin_get_var_int() then performs:
- Allocates val[CFG_VAR_NAME_MAX + 1] (65 bytes) on stack
- Calls gmin_get_config_var(dev, is_gmin, var, val, &len) with len=64
- If EFI variable is >64 bytes, efi.get_variable() sets len=required_size
- Due to bug #1, thinks call succeeded with len=required_size
- Executes val[len] = 0, writing past end of 65-byte stack buffer
This creates a stack buffer overflow when EFI variables are larger than
64 bytes. Since EFI variables can be controlled by firmware or system
configuration, this could potentially be exploited for code execution.
Fix the bug by returning proper error codes from gmin_get_config_var()
based on EFI status instead of stale 'ret' value.
The gmin_get_var_int() function is called during device initialization
for camera sensor configuration on Intel Bay Trail and Cherry Trail
platforms using the atomisp camera stack.
Reported-by: zepta <z3ptaa@gmail.com>
Closes: https://lore.kernel.org/all/CAPBS6KoQyM7FMdPwOuXteXsOe44X4H3F8Fw+y_qWq6E+OdmxQA@mail.gmail.com
Fixes: 38d4f74bc148 ("media: atomisp_gmin_platform: stop abusing efivar API")
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250724080756.work.741-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC code
It now lives in lib/crc/$(SRCARCH)/ rather than arch/$(SRCARCH)/lib/,
and it is no longer artificially split into separate generic and arch
modules. This allows better inlining and dead code elimination
The generic CRC code is also no longer exported, simplifying the API.
(This mirrors the similar changes to SHA-1 and SHA-2 in lib/crypto/,
which can be found in the "Crypto library updates" pull request)
- Improve crc32c() performance on newer x86_64 CPUs on long messages by
enabling the VPCLMULQDQ optimized code
- Simplify the crypto_shash wrappers for crc32_le() and crc32c()
Register just one shash algorithm for each that uses the (fully
optimized) library functions, instead of unnecessarily providing
direct access to the generic CRC code
- Remove unused and obsolete drivers for hardware CRC engines
- Remove CRC-32 combination functions that are no longer used
- Add kerneldoc for crc32_le(), crc32_be(), and crc32c()
- Convert the crc32() macro to an inline function
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (26 commits)
lib/crc: x86/crc32c: Enable VPCLMULQDQ optimization where beneficial
lib/crc: x86: Reorganize crc-pclmul static_call initialization
lib/crc: crc64: Add include/linux/crc64.h to kernel-api.rst
lib/crc: crc32: Change crc32() from macro to inline function and remove cast
nvmem: layouts: Switch from crc32() to crc32_le()
lib/crc: crc32: Document crc32_le(), crc32_be(), and crc32c()
lib/crc: Explicitly include <linux/export.h>
lib/crc: Remove ARCH_HAS_* kconfig symbols
lib/crc: x86: Migrate optimized CRC code into lib/crc/
lib/crc: sparc: Migrate optimized CRC code into lib/crc/
lib/crc: s390: Migrate optimized CRC code into lib/crc/
lib/crc: riscv: Migrate optimized CRC code into lib/crc/
lib/crc: powerpc: Migrate optimized CRC code into lib/crc/
lib/crc: mips: Migrate optimized CRC code into lib/crc/
lib/crc: loongarch: Migrate optimized CRC code into lib/crc/
lib/crc: arm64: Migrate optimized CRC code into lib/crc/
lib/crc: arm: Migrate optimized CRC code into lib/crc/
lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/
lib/crc: Move files into lib/crc/
lib/crc32: Remove unused combination support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
* tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
sched/task_stack: Add missing const qualifier to end_of_stack()
kstack_erase: Support Clang stack depth tracking
kstack_erase: Add -mgeneral-regs-only to silence Clang warnings
init.h: Disable sanitizer coverage for __init and __head
kstack_erase: Disable kstack_erase for all of arm compressed boot code
x86: Handle KCOV __init vs inline mismatches
arm64: Handle KCOV __init vs inline mismatches
s390: Handle KCOV __init vs inline mismatches
arm: Handle KCOV __init vs inline mismatches
mips: Handle KCOV __init vs inline mismatch
powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section
configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON
configs/hardening: Enable CONFIG_KSTACK_ERASE
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth
stackleak: Rename STACKLEAK to KSTACK_ERASE
seq_buf: Introduce KUnit tests
string: Group str_has_prefix() and strstarts()
kunit/fortify: Add back "volatile" for sizeof() constants
acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Introduce regular REGSET note macros arch-wide (Dave Martin)
- Remove arbitrary 4K limitation of program header size (Yin Fengwei)
- Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi)
* tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (25 commits)
fork: reorder function qualifiers for copy_clone_args_from_user
binfmt_elf: remove the 4k limitation of program header size
binfmt_elf: Warn on missing or suspicious regset note names
xtensa: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
um: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
x86/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
sh: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
s390/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
riscv: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
parisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
openrisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
nios2: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
LoongArch: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
hexagon: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
csky: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Replace the ATA_DFLAG_ZAC device flag with the helper function
ata_dev_is_zac() testing directly the device class and device zoned
mode (me)
- Some small cleanup of ata_scsi_offline_dev() code (me)
- Improve the description of the link power management (LPM) policies
in Kconfig and in the comments defining these. Together with this,
clarify the description of the ahci driver mobile_lpm_policy module
parameter (me)
- Various code refactoring of libata LPM handling (ata_eh_set_lpm()
renaming, introduce ata_dev_config_lpm(), LPM related quirk handling,
and LPM related feature advertizing on device scan) (me)
- Avoid unnecessary device reset when revalidating after an error when
LPM is used (me)
- Do not allow setting a port/link LPM policy if LPM is not supported,
either because the controller does not support partial, slumber nor
devsleep, or when the port is an external port with hotplug
capability (me)
- Make sure that device initiated power management (DIPM) is not
enabled if the host (controller) lacks support for this feature (me)
- Improve messages and debug messages related to LPM, in particular,
reduce the number of messages signaling the lack of LPM support (me)
- Cache in memory a device general purpose log directory to avoid
having to access this log for every log page access. The intent here
is to reduce the number of read log commands when scanning or
revalidating a device (me)
- Change ata_dev_cleanup_cdl_resources() to be a static function (me)
- Rename and simplify the mode setting functions (me)
- Introduce the helper function ata_port_eh_scheduled() to check if EH
is pending or running for a port (me)
- Improve ata_eh_set_pending() (return bool instead of int) (me)
- Use sysfs_emit() instead of scnprintf() for libata-transport
attributes (Jonathan)
- Use the existing macro definiton of RDC vendor ID instead of
hardcoding it in the pata_rdc driver (Andy)
- Rework how EH is called for a port to avoid needing to pass along the
prereset, softreset, hardreset and postreset operations. The driver
API documentation for this is also updated (me)
* tag 'ata-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: (28 commits)
Documentation: driver-api: Update libata error handler information
ata: libata-eh: Simplify reset operation management
ata: libata-eh: Remove ata_do_eh()
ata: pata_rdc: Use registered definition for the RDC vendor
ata: libata-eh: Make ata_eh_followup_srst_needed() return a bool
ata: libata-transport: replace scnprintf with sysfs_emit for simple attributes
ata: libata-eh: use bool for fastdrain in ata_eh_set_pending()
ata: libata: Introduce ata_port_eh_scheduled()
ata: libata-core: Rename ata_do_set_mode()
ata: libata-eh: Rename and make ata_set_mode() static
ata: libata-core: Make ata_dev_cleanup_cdl_resources() static
ata: libata-core: Cache the general purpose log directory
ata: libata_eh: Add debug messages to ata_eh_link_set_lpm()
ata: libata-core: Reduce the number of messages signaling broken LPM
ata: ahci: Disallow LPM policy control if not supported
ata: ahci: Disallow LPM policy control for external ports
ata: ahci: Disable DIPM if host lacks support
ata: libata-sata: Disallow changing LPM state if not supported
ata: libata-eh: Avoid unnecessary resets when revalidating devices
ata: libata-core: Advertize device support for DIPM and HIPM features
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs update from Damien Le Moal:
- Use ZONEFS_SUPER_SIZE instead of PAGE_SIZE to read from disk the
super block (Johannes).
* tag 'zonefs-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: use ZONEFS_SUPER_SIZE instead of PAGE_SIZE
|
|
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
|
|
Pull io_uring updates from Jens Axboe:
- Optimization to avoid reference counts on non-cloned registered
buffers. This is how these buffers were handled prior to having
cloning support, and we can still use that approach as long as the
buffers haven't been cloned to another ring.
- Cleanup and improvement for uring_cmd, where btrfs was the only user
of storing allocated data for the lifetime of the uring_cmd. Clean
that up so we can get rid of the need to do that.
- Avoid unnecessary memory copies in uring_cmd usage. This is
particularly important as a lot of uring_cmd usage necessitates the
use of 128b SQEs.
- A few updates for recv multishot, where it's now possible to add
fairness limits for limiting how much is transferred for each retry
loop. Additionally, recv multishot now supports an overall cap as
well, where once reached the multishot recv will terminate. The
latter is useful for buffer management and juggling many recv streams
at the same time.
- Add support for returning the TX timestamps via a new socket command.
This feature can work in either singleshot or multishot mode, where
the latter triggers a completion whenever new timestamps are
available. This is an alternative to using the existing error queue.
- Add support for an io_uring "mock" file, which is the start of being
able to do 100% targeted testing in terms of exercising io_uring
request handling. The idea is to have a file type that can be
anything the tester would like, and behave exactly how you want it to
behave in terms of hitting the code paths you want.
- Improve zcrx by using sgtables to de-duplicate and improve dma
address handling.
- Prep work for supporting larger pages for zcrx.
- Various little improvements and fixes.
* tag 'for-6.17/io_uring-20250728' of git://git.kernel.dk/linux: (42 commits)
io_uring/zcrx: fix leaking pages on sg init fail
io_uring/zcrx: don't leak pages on account failure
io_uring/zcrx: fix null ifq on area destruction
io_uring: fix breakage in EXPERT menu
io_uring/cmd: remove struct io_uring_cmd_data
btrfs/ioctl: store btrfs_uring_encoded_data in io_btrfs_cmd
io_uring/cmd: introduce IORING_URING_CMD_REISSUE flag
io_uring/zcrx: account area memory
io_uring: export io_[un]account_mem
io_uring/net: Support multishot receive len cap
io_uring: deduplicate wakeup handling
io_uring/net: cast min_not_zero() type
io_uring/poll: cleanup apoll freeing
io_uring/net: allow multishot receive per-invocation cap
io_uring/net: move io_sr_msg->retry_flags to io_sr_msg->flags
io_uring/net: use passed in 'len' in io_recv_buf_select()
io_uring/zcrx: prepare fallback for larger pages
io_uring/zcrx: assert area type in io_zcrx_iov_page
io_uring/zcrx: allocate sgtable for umem areas
io_uring/zcrx: introduce io_populate_area_dma
...
|
|
Pull smb server updates from Steve French:
- Fix mtime/ctime reporting issue
- Auth fixes, including two session setup race bugs reported by ZDI
- Locking improvement in query directory
- Fix for potential deadlock in creating hardlinks
- Improvements to path name processing
* tag 'v6.17-rc-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix corrupted mtime and ctime in smb2_open
ksmbd: fix Preauh_HashValue race condition
ksmbd: check return value of xa_store() in krb5_authenticate
ksmbd: fix null pointer dereference error in generate_encryptionkey
smb/server: add ksmbd_vfs_kern_path()
smb/server: avoid deadlock when linking with ReplaceIfExists
smb/server: simplify ksmbd_vfs_kern_path_locked()
smb/server: use lookup_one_unlocked()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs
Pull hfs/hfsplus updates from Viacheslav Dubeyko:
"Johannes Thumshirn has made nice cleanup in hfsplus_submit_bio().
Tetsuo Handa has fixed the syzbot reported issue in
hfsplus_create_attributes_file() for the case of corruption the
Attributes File's metadata.
Yangtao Li has fixed the syzbot reported issue by removing the
uneccessary WARN_ON() in hfsplus_free_extents().
Other fixes:
- restore generic/001 successful execution by erasing deleted b-tree
nodes
- eliminate slab-out-of-bounds issue in hfs_bnode_read() and
hfsplus_bnode_read() by checking correctness of offset and length
when accessing b-tree node contents
- eliminate slab-out-of-bounds read in hfsplus_uni2asc() if the
b-tree node record has corrupted length of a name that could be
bigger than HFSPLUS_MAX_STRLEN
- eliminate general protection fault in hfs_find_init() for the case
of initial b-tree object creation"
* tag 'hfs-v6.17-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs:
hfs: fix general protection fault in hfs_find_init()
hfs: fix slab-out-of-bounds in hfs_bnode_read()
hfsplus: fix slab-out-of-bounds in hfsplus_bnode_read()
hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc()
hfsplus: don't use BUG_ON() in hfsplus_create_attributes_file()
hfsplus: don't set REQ_SYNC for hfsplus_submit_bio()
hfsplus: remove mutex_lock check in hfsplus_free_extents
hfs: make splice write available again
hfsplus: make splice write available again
hfs: fix not erasing deleted b-tree node issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull udf and ext2 updates from Jan Kara:
"A few udf and ext2 fixes and cleanups"
* tag 'fs_for_v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Verify partition map count
udf: stop using write_cache_pages
ext2: Handle fiemap on empty files to prevent EINVAL
|
|
When introduced in commit 9eb22f7fedfc ("fs: add ioctl to query metadata
and protection info capabilities") the stub of blk_get_meta_cap() for
!BLK_DEV_INTEGRITY always returns -EOPNOTSUPP. The motivation was that
while the command was unsupported in that configuration it was still
recognized.
A later change instead assumed -ENOIOCTLCMD as is required for unknown
ioctl commands per Documentation/driver-api/ioctl.rst. The result being
that on !BLK_DEV_INTEGRITY configs, any ioctl which reaches
blkdev_common_ioctl() will return -EOPNOTSUPP.
Change the stub to return -ENOIOCTLCMD, fixing the issue and better
matching with expectations.
[ The blkdev_common_ioctl() confusion has been fixed, but -ENOIOCTLCMD
is the right thing to return for unrecognized ioctls, so the patch
remains the right thing to do. - Linus ]
Link: https://lore.kernel.org/lkml/CACzX3AsRd__fXb9=CJPTTJC494SDnYAtYrN2=+bZgMCvM6UQDg@mail.gmail.com
Fixes: 42b0ef01e6b5 ("block: fix FS_IOC_GETLBMD_CAP parsing in blkdev_common_ioctl()")
Signed-off-by: Klara Modin <klarasmodin@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove incorrect page alignment check for the writeback len arg in
fuse_iomap_writeback_range(). len will always be block-aligned as
passed in by iomap.
On regular fuse filesystems, i_blkbits is set to PAGE_SHIFT so this is
not a problem but for fuseblk filesystems, the block size is set to a
default of 512 bytes or a block size passed in at mount time.
Please note that non-page-aligned lengths are fine for the logic in
fuse_iomap_writeback_range(). The check was originally added as a
safeguard to detect conspicuously wrong ranges.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Fixes: ef7e7cbb323f ("fuse: use iomap for writeback")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/linux-fsdevel/CA+G9fYs5AdVM-T2Tf3LciNCwLZEHetcnSkHsjZajVwwpM2HmJw@mail.gmail.com/
Reported-by: Sasha Levin <sashal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iomap updates from Christian Brauner:
- Refactor the iomap writeback code and split the generic and ioend/bio
based writeback code.
There are two methods that define the split between the generic
writeback code, and the implemementation of it, and all knowledge of
ioends and bios now sits below that layer.
- Add fuse iomap support for buffered writes and dirty folio writeback.
This is needed so that granular uptodate and dirty tracking can be
used in fuse when large folios are enabled. This has two big
advantages. For writes, instead of the entire folio needing to be
read into the page cache, only the relevant portions need to be. For
writeback, only the dirty portions need to be written back instead of
the entire folio.
* tag 'vfs-6.17-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fuse: refactor writeback to use iomap_writepage_ctx inode
fuse: hook into iomap for invalidating and checking partial uptodateness
fuse: use iomap for folio laundering
fuse: use iomap for writeback
fuse: use iomap for buffered writes
iomap: build the writeback code without CONFIG_BLOCK
iomap: add read_folio_range() handler for buffered writes
iomap: improve argument passing to iomap_read_folio_sync
iomap: replace iomap_folio_ops with iomap_write_ops
iomap: export iomap_writeback_folio
iomap: move folio_unlock out of iomap_writeback_folio
iomap: rename iomap_writepage_map to iomap_writeback_folio
iomap: move all ioend handling to ioend.c
iomap: add public helpers for uptodate state manipulation
iomap: hide ioends from the generic writeback code
iomap: refactor the writeback interface
iomap: cleanup the pending writeback tracking in iomap_writepage_map_blocks
iomap: pass more arguments using the iomap writeback context
iomap: header diet
|
