| Age | Commit message (Collapse) | Author |
|---|
|
The MTD device is blocked from writing to the SPI-NOR chip if any region
of it is write-protected, even if "writeable=1" module parameter is set.
Add ability to bypass this behaviour by introducing new module parameter
"ignore_protestion_status" which allows to rely on the write protection
mechanism of SPI-NOR chip itself, which most modern chips (since
the 1990'+) have already implemented.
Any erase/write operations performed on the write-protected section will
be rejected by the chip.
Signed-off-by: Jakub Czapiga <czapiga@google.com>
Link: https://patch.msgid.link/20250725122542.2633334-1-czapiga@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document that using the MMIO helpers will automatically enable the
'fast_io' parameter. This makes the used locking scheme more transparent
and avoids superfluous setting of this parameter in drivers.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20250725110337.4303-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The kmemleak reports memory leaks related to elevator resources that
were originally allocated in the ->init_hctx() method. The following
leak traces are observed after running blktests block/040:
unreferenced object 0xffff8881b82f7400 (size 512):
comm "check", pid 68454, jiffies 4310588881
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 5bac8b34):
__kvmalloc_node_noprof+0x55d/0x7a0
sbitmap_init_node+0x15a/0x6a0
kyber_init_hctx+0x316/0xb90
blk_mq_init_sched+0x419/0x580
elevator_switch+0x18b/0x630
elv_update_nr_hw_queues+0x219/0x2c0
__blk_mq_update_nr_hw_queues+0x36a/0x6f0
blk_mq_update_nr_hw_queues+0x3a/0x60
0xffffffffc09ceb80
0xffffffffc09d7e0b
configfs_write_iter+0x2b1/0x470
vfs_write+0x527/0xe70
ksys_write+0xff/0x200
do_syscall_64+0x98/0x3c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
unreferenced object 0xffff8881b82f6000 (size 512):
comm "check", pid 68454, jiffies 4310588881
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 5bac8b34):
__kvmalloc_node_noprof+0x55d/0x7a0
sbitmap_init_node+0x15a/0x6a0
kyber_init_hctx+0x316/0xb90
blk_mq_init_sched+0x419/0x580
elevator_switch+0x18b/0x630
elv_update_nr_hw_queues+0x219/0x2c0
__blk_mq_update_nr_hw_queues+0x36a/0x6f0
blk_mq_update_nr_hw_queues+0x3a/0x60
0xffffffffc09ceb80
0xffffffffc09d7e0b
configfs_write_iter+0x2b1/0x470
vfs_write+0x527/0xe70
ksys_write+0xff/0x200
do_syscall_64+0x98/0x3c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
unreferenced object 0xffff8881b82f5800 (size 512):
comm "check", pid 68454, jiffies 4310588881
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 5bac8b34):
__kvmalloc_node_noprof+0x55d/0x7a0
sbitmap_init_node+0x15a/0x6a0
kyber_init_hctx+0x316/0xb90
blk_mq_init_sched+0x419/0x580
elevator_switch+0x18b/0x630
elv_update_nr_hw_queues+0x219/0x2c0
__blk_mq_update_nr_hw_queues+0x36a/0x6f0
blk_mq_update_nr_hw_queues+0x3a/0x60
0xffffffffc09ceb80
0xffffffffc09d7e0b
configfs_write_iter+0x2b1/0x470
vfs_write+0x527/0xe70
ksys_write+0xff/0x200
do_syscall_64+0x98/0x3c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The issue arises while we run nr_hw_queue update, Specifically, we first
reallocate hardware contexts (hctx) via __blk_mq_realloc_hw_ctxs(), and
then later invoke elevator_switch() (assuming q->elevator is not NULL).
The elevator switch code would first exit old elevator (elevator_exit)
and then switches to the new elevator. The elevator_exit loops through
each hctx and invokes the elevator’s per-hctx exit method ->exit_hctx(),
which releases resources allocated during ->init_hctx().
This memleak manifests when we reduce the num of h/w queues - for example,
when the initial update sets the number of queues to X, and a later update
reduces it to Y, where Y < X. In this case, we'd loose the access to old
hctxs while we get to elevator exit code because __blk_mq_realloc_hw_ctxs
would have already released the old hctxs. As we don't now have any
reference left to the old hctxs, we don't have any way to free the
scheduler resources (which are allocate in ->init_hctx()) and kmemleak
complains about it.
This issue was caused due to the commit 596dce110b7d ("block: simplify
elevator reattachment for updating nr_hw_queues"). That change unified
the two-stage elevator teardown and reattachment into a single call that
occurs after __blk_mq_realloc_hw_ctxs() has already freed the hctxs.
This patch restores the previous two-stage elevator switch logic during
nr_hw_queues updates. First, the elevator is switched to 'none', which
ensures all scheduler resources are properly freed. Then, the hardware
contexts (hctxs) are reallocated, and the software-to-hardware queue
mappings are updated. Finally, the original elevator is reattached. This
sequence prevents loss of references to old hctxs and avoids the scheduler
resource leaks reported by kmemleak.
Reported-by : Yi Zhang <yi.zhang@redhat.com>
Fixes: 596dce110b7d ("block: simplify elevator reattachment for updating nr_hw_queues")
Closes: https://lore.kernel.org/all/CAHj4cs8oJFvz=daCvjHM5dYCNQH4UXwSySPPU4v-WHce_kZXZA@mail.gmail.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250724102540.1366308-1-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix kernel-doc formatting issue causing unexpected indentation error
in ctucanfd driver documentation build. Convert main return values
to bullet list format while preserving numbered sub-list in order to
correct indentation error and visual structure in rendered html.
Signed-off-by: Luis Felipe Hernandez <luis.hernandez093@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://patch.msgid.link/20250722035352.21807-1-luis.hernandez093@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add a dependency on PC104 to limit (restrict) this driver kconfig
prompt to kernel configs that have PC104 set.
Add COMPILE_TEST as a possibility for more complete build coverage.
I tested this build config on x86_64 5 times without problems.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250721002823.3548945-1-rdunlap@infradead.org
[mkl: fix conflict, remove Fixes: tag]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The latest firmware versions of USB CAN FD interfaces export the EP numbers
to be used to dialog with the device via the "type" field of a response to
a vendor request structure, particularly when its value is greater than or
equal to 2.
Correct the driver's test of this field.
Fixes: 4f232482467a ("can: peak_usb: include support for a new MCU")
Signed-off-by: Stephane Grosjean <stephane.grosjean@hms-networks.com>
Link: https://patch.msgid.link/20250724081550.11694-1-stephane.grosjean@free.fr
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
[mkl: rephrase commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Using numbered error labels is discouraged (e.g. as it requires
renumbering them when adding a new intermediate error path).
Rename the error labels after what they do.
While at it, drop the redundant platform allocation failure dev_err()
as the error would already have been logged by the allocator.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724091910.21092-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to drop the reference to the control device taken by
of_find_device_by_node() during probe when the driver is unbound.
Fixes: 8934d3e4d0e7 ("usb: musb: omap2430: Don't use omap_get_control_dev()")
Cc: stable@vger.kernel.org # 3.13
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724091910.21092-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to drop the reference to the companion device taken during
probe when the driver is unbound.
Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch")
Cc: stable@vger.kernel.org # 4.19
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724091910.21092-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to drop the references taken to the child devices by
of_find_device_by_node() during probe on driver unbind.
Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Cc: stable@vger.kernel.org # 5.2
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250724091910.21092-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to drop the reference to the dwc3 device taken by
of_find_device_by_node() on probe errors and on driver unbind.
Fixes: 6dd2565989b4 ("usb: dwc3: add imx8mp dwc3 glue layer driver")
Cc: stable@vger.kernel.org # 5.12
Cc: Li Jun <jun.li@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724091910.21092-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Nothing seems to prevent the driver from being compile tested on
non-OMAP platforms so enable it to provide wider build coverage.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724092104.21317-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit f3323cd03e58 ("usb: gadget: udc: renesas_usb3: remove R-Car
H3 ES1.* handling") the driver only supports OF probe so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250724092006.21216-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When encounters some errors like these:
xhci_hcd 0000:4a:00.2: xHCI dying or halted, can't queue_command
xhci_hcd 0000:4a:00.2: FIXME: allocate a command ring segment
usb usb5-port6: couldn't allocate usb_device
It's hard to know whether xhc_state is dying or halted. So it's better
to print xhc_state's value which can help locate the resaon of the bug.
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20250725060117.1773770-1-suhui@nfschina.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case of ovl_lookup_temp() failure, we currently print `err`
which is actually not initialized at all.
Instead, properly print PTR_ERR(whiteout) which is where the
actual error really is.
Address-Coverity-ID: 1647983 ("Uninitialized variables (UNINIT)")
Fixes: 8afa0a7367138 ("ovl: narrow locking in ovl_whiteout()")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Link: https://lore.kernel.org/20250721203821.7812-1-antonio@mandelbit.com
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Quote from the virtio specification chapter 4.2.2.2:
"For the device-specific configuration space, the driver MUST use 8 bit
wide accesses for 8 bit wide fields, 16 bit wide and aligned accesses
for 16 bit wide fields and 32 bit wide and aligned accesses for 32 and
64 bit wide fields."
Signed-off-by: Harald Mommer <harald.mommer@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Fixes: 3a29355a22c0 ("gpio: Add virtio-gpio driver")
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20250724143718.5442-2-harald.mommer@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
If STATX_BASIC_STATS flags are not given as an argument to vfs_getattr,
It can not get ctime and mtime in kstat.
This causes a problem showing mtime and ctime outdated from cifs.ko.
File: /xfstest.test/foo
Size: 4096 Blocks: 8 IO Block: 1048576 regular file
Device: 0,65 Inode: 2033391 Links: 1
Access: (0755/-rwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root)
Context: system_u:object_r:cifs_t:s0
Access: 2025-07-23 22:15:30.136051900 +0100
Modify: 1970-01-01 01:00:00.000000000 +0100
Change: 1970-01-01 01:00:00.000000000 +0100
Birth: 2025-07-23 22:15:30.136051900 +0100
Cc: stable@vger.kernel.org
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If client send multiple session setup requests to ksmbd,
Preauh_HashValue race condition could happen.
There is no need to free sess->Preauh_HashValue at session setup phase.
It can be freed together with session at connection termination phase.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27661
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
xa_store() may fail so check its return value and return error code if
error occurred.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If client send two session setups with krb5 authenticate to ksmbd,
null pointer dereference error in generate_encryptionkey could happen.
sess->Preauth_HashValue is set to NULL if session is valid.
So this patch skip generate encryption key if session is valid.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27654
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This fixes an infinite loop when repairing "extent past end of inode",
when the extent is an older snapshot than the inode that needs repair.
Without the snaphsots_seen_add_inorder() we keep trying to delete the
same extent, even though it's no longer visible in the inode's snapshot.
Fixes: 63d6e9311999 ("bcachefs: bch2_fpunch_snapshot()")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When flushing the btree write buffer, we pull write buffer keys directly
from the journal instead of letting the journal write path copy them to
the write buffer.
When flushing from the currently open journal buffer, we have to block
new reservations and wait for outstanding reservations to complete.
Recheck the reservation state after blocking new reservations:
previously, we were checking the reservation count from before calling
__journal_block().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 9 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels.
7 are for MM"
* tag 'mm-hotfixes-stable-2025-07-24-18-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
sprintf.h requires stdarg.h
resource: fix false warning in __request_region()
mm/damon/core: commit damos_quota_goal->nid
kasan: use vmalloc_dump_obj() for vmalloc error reports
mm/ksm: fix -Wsometimes-uninitialized from clang-21 in advisor_mode_show()
mm: update MAINTAINERS entry for HMM
nilfs2: reject invalid file types when reading inodes
selftests/mm: fix split_huge_page_test for folio_split() tests
mailmap: add entry for Senozhatsky
mm/zsmalloc: do not pass __GFP_MOVABLE if CONFIG_COMPACTION=n
mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list
|
|
Daniel Zahka says:
====================
selftests: drv-net: tso: fix issues with tso selftest
There are a couple issues with the tso selftest.
- Features required for test cases are detected by searching the set
of active features at test start, so if a feature is supported by
hw, but disabled, the test will report that the feature under test
is not available and fail.
- The vxlan test cases do not use the correct ip link flags based on
the gso feature under test
- The non-tunneled tso6 test case is showing up with the wrong name.
With all patches applied test output is:
# Detected qstat for LSO wire-packets
TAP version 13
1..14
ok 1 tso.ipv4
# Testing with mangleid enabled
ok 2 tso.vxlan4_ipv4
ok 3 tso.vxlan4_ipv6
# Testing with mangleid enabled
ok 4 tso.vxlan_csum4_ipv4
ok 5 tso.vxlan_csum4_ipv6
# Testing with mangleid enabled
ok 6 tso.gre4_ipv4
ok 7 tso.gre4_ipv6
ok 8 tso.ipv6
# Testing with mangleid enabled
ok 9 tso.vxlan6_ipv4
ok 10 tso.vxlan6_ipv6
# Testing with mangleid enabled
ok 11 tso.vxlan_csum6_ipv4
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre6_ipv4
ok 14 tso.gre6_ipv6
# Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
====================
Link: https://patch.msgid.link/20250723184740.4075410-1-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The non-tunneled tso6 test case was showing up as:
ok 8 tso.ipv4
This is because of the way test_builder() uses the inner_ipver arg in
test naming, and how test_info is iterated over in main(). Given that
some tunnels not supported yet, e.g. ipip or sit, only support ipv4 or
ipv6 as the inner network protocol, I think the best fix here is to
call test_builder() in separate branches for tunneled and non-tunneled
tests, and to make supported inner l3 types an explicit attribute of
tunnel test cases.
# Detected qstat for LSO wire-packets
TAP version 13
1..14
ok 1 tso.ipv4
# Testing with mangleid enabled
ok 2 tso.vxlan4_ipv4
ok 3 tso.vxlan4_ipv6
# Testing with mangleid enabled
ok 4 tso.vxlan_csum4_ipv4
ok 5 tso.vxlan_csum4_ipv6
# Testing with mangleid enabled
ok 6 tso.gre4_ipv4
ok 7 tso.gre4_ipv6
ok 8 tso.ipv6
# Testing with mangleid enabled
ok 9 tso.vxlan6_ipv4
ok 10 tso.vxlan6_ipv6
# Testing with mangleid enabled
ok 11 tso.vxlan_csum6_ipv4
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre6_ipv4
ok 14 tso.gre6_ipv6
# Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250723184740.4075410-4-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When vxlan is used with ipv6 as the outer network header, the correct
ip link parameters for acheiving the SKB_GSO_UDP_TUNNEL gso type is
"udp6zerocsumtx udp6zerocsumrx". Otherwise the gso type will be
SKB_GSO_UDP_TUNNEL_CSUM.
This bug was the reason for the second of the three possible
invocations of run_one_stream() invocations, so that can be deleted as
well. We only need to test with the feature off and on.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250723184740.4075410-3-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tso.py uses the active features at the time of test execution
as the set of available gso features to test. This means if a gso
feature is supported but toggled off at test start, the test will be
skipped with a "Device does not support {feature}" message.
Instead, we can enumerate the set of toggleable features by capturing
the driver's hw_features bitmap. To avoid configuration side-effects
from running the test, we also snapshot the wanted_features flag set
before making any feature changes, and then attempt to restore the
same set of wanted_features before test exit.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250723184740.4075410-2-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gal Pressman says:
====================
selftests: drv-net: Fix and improve command requirement checking
This series fixes remote command checking and cleans up command
requirement calls across tests.
The first patch fixes require_cmd() incorrectly checking commands
locally even when remote=True was specified due to a missing host
parameter.
The second patch makes require_cmd() usage explicit about local/remote
requirements, avoiding unnecessary test failures and consolidating
duplicate calls.
====================
Link: https://patch.msgid.link/20250723135454.649342-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make require_cmd() calls explicit about whether commands are needed
locally, remotely, or both.
Since require_cmd() defaults to local=True, tests should explicitly set
local=False when commands are only needed remotely.
- socat: Set local=False since it's only needed on remote hosts.
- iperf3: Use single call with both local=True and remote=True since
it's needed on both hosts.
This avoids unnecessary test failures when commands are missing locally
but available remotely where actually needed, and consolidates a
duplicate require_cmd() call into single call that checks both hosts.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Fixes: f1e68a1a4a40 ("selftests: drv-net: add require_XYZ() helpers for validating env")
Fixes: c76bab22e920 ("selftests: drv-net: rss_input_xfrm: Check test prerequisites before running")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250723135454.649342-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The require_cmd() method was checking for command availability locally
even when remote=True was specified, due to a missing host parameter.
Fix by passing host=self.remote when checking remote command
availability, ensuring commands are verified on the correct host.
Fixes: f1e68a1a4a40 ("selftests: drv-net: add require_XYZ() helpers for validating env")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250723135454.649342-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When building, the following warnings will appear.
"
pci_irq.c: In function ‘mlx5_ctrl_irq_request’:
pci_irq.c:494:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
pci_irq.c: In function ‘mlx5_irq_request_vector’:
pci_irq.c:561:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
eq.c: In function ‘comp_irq_request_sf’:
eq.c:897:1: warning: the frame size of 1080 bytes is larger than 1024 bytes [-Wframe-larger-than=]
irq_affinity.c: In function ‘irq_pool_request_irq’:
irq_affinity.c:74:1: warning: the frame size of 1048 bytes is larger than 1024 bytes [-Wframe-larger-than=]
"
These warnings indicate that the stack frame size exceeds 1024 bytes in
these functions.
To resolve this, instead of allocating large memory buffers on the stack,
it is better to use kvzalloc to allocate memory dynamically on the heap.
This approach reduces stack usage and eliminates these frame size warnings.
Acked-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250722212023.244296-1-yanjun.zhu@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Samiullah Khawaja says:
====================
Use enum to represent the NAPI threaded state
Instead of using 0/1 to represent the NAPI threaded states use enum
(disabled/enabled) to represent the NAPI threaded states.
This patch series is a subset of patches from the following patch series:
https://lore.kernel.org/20250718232052.1266188-1-skhawaja@google.com
The first 3 patches are being sent separately as per the feedback to
replace the usage of 0/1 as NAPI threaded states with enum. See:
https://lore.kernel.org/20250721164856.1d2208e4@kernel.org
====================
Link: https://patch.msgid.link/20250723013031.2911384-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of using '0' and '1' for napi threaded state use an enum with
'disabled' and 'enabled' states.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-4-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare for adding an enum type for NAPI threaded states by adding
netif_threaded_enable API. De-export the existing netif_set_threaded API
and only use it internally. Update existing drivers to use
netif_threaded_enable instead of the de-exported netif_set_threaded.
Note that dev_set_threaded used by mt76 debugfs file is unchanged.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-3-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move multiple copies of same code snippet doing `gro_flush` and
`gro_normal_list` into separate helper function.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-2-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_sync: fix double free in 'hci_discovery_filter_clear()'
- hci_event: Mask data status from LE ext adv reports
- hci_devcd_dump: fix out-of-bounds via dev_coredumpv
- ISO: add socket option to report packet seqnum via CMSG
- hci_event: Add support for handling LE BIG Sync Lost event
- ISO: Support SCM_TIMESTAMPING for ISO TS
- hci_core: Add PA_LINK to distinguish BIG sync and PA sync connections
- hci_sock: Reset cookie to zero in hci_sock_free_cookie()
drivers:
- btusb: Add new VID/PID 0489/e14e for MT7925
- btusb: Add a new VID/PID 2c7c/7009 for MT7925
- btusb: Add RTL8852BE device 0x13d3:0x3618
- btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601)
- btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano
- btusb: QCA: Support downloading custom-made firmwares
- btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
- nxp: add support for supply and reset
- btnxpuart: Add support for 4M baudrate
- btnxpuart: Correct the Independent Reset handling after FW dump
- btnxpuart: Add uevents for FW dump and FW download complete
- btintel: Define a macro for Intel Reset vendor command
- btintel_pcie: Support Function level reset
- btintel_pcie: Add support for device 0x4d76
- btintel_pcie: Make driver wait for alive interrupt
- btintel_pcie: Fix Alive Context State Handling
- hci_qca: Enable ISO data packet RX
* tag 'for-net-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (42 commits)
Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections
Bluetooth: hci_event: Mask data status from LE ext adv reports
Bluetooth: btintel_pcie: Fix Alive Context State Handling
Bluetooth: btintel_pcie: Make driver wait for alive interrupt
Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv
Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()'
Bluetooth: btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
Bluetooth: btusb: Sort WCN6855 device IDs by VID and PID
Bluetooth: btusb: QCA: Support downloading custom-made firmwares
Bluetooth: btnxpuart: Add uevents for FW dump and FW download complete
Bluetooth: btnxpuart: Correct the Independent Reset handling after FW dump
Bluetooth: ISO: Support SCM_TIMESTAMPING for ISO TS
Bluetooth: ISO: add socket option to report packet seqnum via CMSG
Bluetooth: btintel: Define a macro for Intel Reset vendor command
Bluetooth: Fix typos in comments
Bluetooth: RFCOMM: Fix typos in comments
Bluetooth: aosp: Fix typo in comment
Bluetooth: hci_bcm4377: Fix typo in comment
Bluetooth: btrtl: Fix typo in comment
Bluetooth: btmtk: Fix typo in log string
...
====================
Link: https://patch.msgid.link/20250723190233.166823-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix build without debugfs (Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aIKWC2RPlbRxZc5o@fedora
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-07-24
We've added 3 non-merge commits during the last 3 day(s) which contain
a total of 4 files changed, 40 insertions(+), 15 deletions(-).
The main changes are:
1) Improved verifier error message for incorrect narrower load from
pointer field in ctx, from Paul Chaignon.
2) Disabled migration in nf_hook_run_bpf to address a syzbot report,
from Kuniyuki Iwashima.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Test invalid narrower ctx load
bpf: Reject narrower access to pointer ctx fields
bpf: Disable migration in nf_hook_run_bpf().
====================
Link: https://patch.msgid.link/20250724173306.3578483-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In file included from drivers/crypto/intel/qat/qat_common/adf_pm_dbgfs_utils.c:4:
include/linux/sprintf.h:11:54: error: unknown type name 'va_list'
11 | __printf(2, 0) int vsprintf(char *buf, const char *, va_list);
| ^~~~~~~
include/linux/sprintf.h:1:1: note: 'va_list' is defined in header '<stdarg.h>'; this is probably fixable by adding '#include <stdarg.h>'
Link: https://lkml.kernel.org/r/20250721173754.42865913@canb.auug.org.au
Fixes: 39ced19b9e60 ("lib/vsprintf: split out sprintf() and friends")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A warning is raised when __request_region() detects a conflict with a
resource whose resource.desc is IORES_DESC_DEVICE_PRIVATE_MEMORY.
But this warning is only valid for iomem_resources.
The hmem device resource uses resource.desc as the numa node id, which can
cause spurious warnings.
This warning appeared on a machine with multiple cxl memory expanders.
One of the NUMA node id is 6, which is the same as the value of
IORES_DESC_DEVICE_PRIVATE_MEMORY.
In this environment it was just a spurious warning, but when I saw the
warning I suspected a real problem so it's better to fix it.
This change fixes this by restricting the warning to only iomem_resource.
This also adds a missing new line to the warning message.
Link: https://lkml.kernel.org/r/20250719112604.25500-1-akinobu.mita@gmail.com
Fixes: 7dab174e2e27 ("dax/hmem: Move hmem device registration to dax_hmem.ko")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMOS quota goal uses 'nid' field when the metric is
DAMOS_QUOTA_NODE_MEM_{USED,FREE}_BP. But the goal commit function is not
updating the goal's nid field. Fix it.
Link: https://lkml.kernel.org/r/20250719181932.72944-1-sj@kernel.org
Fixes: 0e1c773b501f ("mm/damon/core: introduce damos quota goal metrics for memory node utilization") [6.16.x]
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix DP 2.7 Gbps DP_LINK_BW value on g4x (Ville)
- Fix return value on intel_atomic_commit_fence_wait (Aakash)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aIJE9F-PcCe35PFb@intel.com
|
|
Jakub Kicinski says:
====================
tools: ynl-gen: print setters for multi-val attrs
ncdevmem seems to manually prepare the queue attributes.
This is not ideal, YNL should be providing helpers for this.
Make YNL output allocation and setter helpers for multi-val attrs.
v1: https://lore.kernel.org/20250722161927.3489203-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250723171046.4027470-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the just-added YNL helpers instead of manually setting
"_present" bits in the queue attrs. Compile tested only.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250723171046.4027470-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For basic types we "flatten" setters. If a request "a" has a simple
nest "b" with value "val" we print helpers like:
req_set_a_b(struct a *req, int val)
{
req->_present.a = 1;
req->b._present.val = 1;
req->b.val = ...
}
This is not possible for multi-attr because they have to be allocated
dynamically by the user. Print "object level" setters so that user
preparing the object doesn't have to futz with the presence bits
and other YNL internals.
Add the ability to pass in the variable name to generated setters.
Using "req" here doesn't feel right, while the attr is part of a request
it's not the request itself, so it seems cleaner to call it "obj".
Example:
static inline void
netdev_queue_id_set_id(struct netdev_queue_id *obj, __u32 id)
{
obj->_present.id = 1;
obj->id = id;
}
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723171046.4027470-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In general YNL provides allocation and free helpers for types.
For pure nested structs which are used as multi-attr (and therefore
have to be allocated dynamically) we already print a free helper
as it's needed by free of the containing struct.
Add printing of the alloc helper for consistency. The helper
takes the number of entries to allocate as an argument, e.g.:
static inline struct netdev_queue_id *netdev_queue_id_alloc(unsigned int n)
{
return calloc(n, sizeof(struct netdev_queue_id));
}
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723171046.4027470-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Just to avoid making the main function even more enormous,
before adding more things to print move the free printing
to a helper which already prints the type.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723171046.4027470-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Don't add _req to helper names for pure types. We don't currently
print those so it makes no difference to existing codegen.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723171046.4027470-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another wireless update:
- rtw89:
- STA+P2P concurrency
- support for USB devices RTL8851BU/RTL8852BU
- ath9k: OF support
- ath12k:
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- iwlwifi: some FIPS interoperability
- brcm80211: support SDIO 43751 device
- rt2x00: better DT/OF support
- cfg80211/mac80211:
- improved S1G support
- beacon monitor for MLO
* tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (199 commits)
ssb: use new GPIO line value setter callbacks for the second GPIO chip
wifi: Fix typos
wifi: brcmsmac: Use str_true_false() helper
wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failure
wifi: brcm80211: Remove yet more unused functions
wifi: brcm80211: Remove more unused functions
wifi: brcm80211: Remove unused functions
wifi: iwlwifi: Revert "wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions"
wifi: iwlwifi: check validity of the FW API range
wifi: iwlwifi: don't export symbols that we shouldn't
wifi: iwlwifi: mld: use spec link id and not FW link id
wifi: iwlwifi: mld: decode EOF bit for AMPDUs
wifi: iwlwifi: Remove support for rx OMI bandwidth reduction
wifi: iwlwifi: stop supporting iwl_omi_send_status_notif ver 1
wifi: iwlwifi: remove SC2F firmware support
wifi: iwlwifi: mvm: Remove NAN support
wifi: iwlwifi: mld: avoid outdated reorder buffer head_sn
wifi: iwlwifi: mvm: avoid outdated reorder buffer head_sn
wifi: iwlwifi: disable certain features for fips_enabled
wifi: iwlwifi: mld: support channel survey collection for ACS scans
...
====================
Link: https://patch.msgid.link/20250724100349.21564-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC appears to have kind of fragile inlining heuristics, in the
sense that it can change whether or not it inlines something based on
optimizations. It looks like the kcov instrumentation being added (or in
this case, removed) from a function changes the optimization results,
and some functions marked "inline" are _not_ inlined. In that case,
we end up with __init code calling a function not marked __init, and we
get the build warnings I'm trying to eliminate in the coming patch that
adds __no_sanitize_coverage to __init functions:
WARNING: modpost: vmlinux: section mismatch in reference: xbc_exit+0x8 (section: .text.unlikely) -> _xbc_exit (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: real_mode_size_needed+0x15 (section: .text.unlikely) -> real_mode_blob_end (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: __set_percpu_decrypted+0x16 (section: .text.unlikely) -> early_set_memory_decrypted (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: memblock_alloc_from+0x26 (section: .text.unlikely) -> memblock_alloc_try_nid (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: acpi_arch_set_root_pointer+0xc (section: .text.unlikely) -> x86_init (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: acpi_arch_get_root_pointer+0x8 (section: .text.unlikely) -> x86_init (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: efi_config_table_is_usable+0x16 (section: .text.unlikely) -> xen_efi_config_table_is_usable (section: .init.text)
This problem is somewhat fragile (though using either __always_inline
or __init will deterministically solve it), but we've tripped over
this before with GCC and the solution has usually been to just use
__always_inline and move on.
For x86 this means forcing several functions to be inline with
__always_inline.
Link: https://lore.kernel.org/r/20250724055029.3623499-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
