summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-07-22Octeontx2-af: Debugfs support for firmware dataHariprasad Kelam
MAC address, Link modes (supported and advertised) and eeprom data for the Netdev interface are read from the shared firmware data. This patch adds debugfs support for the same. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20250720163638.1560323-5-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22Octeontx2-af: RPM: Update DMA maskHariprasad Kelam
CGX/RPM driver supports 48 bits of DMA addressing. Update the DMA mask accordingly. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250720163638.1560323-4-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22Octeontx2-af: Disable stale DMAC filtersSubbaraya Sundeep
During driver initialization disable stale DMAC filters in CGX/RPM set by firmware. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250720163638.1560323-3-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22Octeontx2-af: Add programmed macaddr to RVU pfvfHariprasad Kelam
Octeontx2/CN10k MAC block supports DMAC filters. DMAC filters can be installed on the interface through ethtool. When a user installs a DMAC filter, the interface's MAC address is implicitly added to the filter list. To ensure consistency, this MAC address must be kept in sync with the pfvf->mac_addr field, which is used to install MAC-based NPC rules. This patch updates the pfvf->mac_addr field with the programmed MAC address and also enables VF interfaces to install DMAC filters. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250720163638.1560323-2-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22ibmveth: Add multi buffers rx replenishment hcall supportMingming Cao
This patch enables batched RX buffer replenishment in ibmveth by using the new firmware-supported h_add_logical_lan_buffers() hcall to submit up to 8 RX buffers in a single call, instead of repeatedly calling the single-buffer h_add_logical_lan_buffer() hcall. During the probe, with the patch, the driver queries ILLAN attributes to detect IBMVETH_ILLAN_RX_MULTI_BUFF_SUPPORT bit. If the attribute is present, rx_buffers_per_hcall is set to 8, enabling batched replenishment. Otherwise, it defaults to 1, preserving the original upstream behavior with no change in code flow for unsupported systems. The core rx replenish logic remains the same. But when batching is enabled, the driver aggregates up to 8 fully prepared descriptors into a single h_add_logical_lan_buffers() hypercall. If any allocation or DMA mapping fails while preparing a batch, only the successfully prepared buffers are submitted, and the remaining are deferred for the next replenish cycle. If at runtime the firmware stops accepting the batched hcall—e,g, after a Live Partition Migration (LPM) to a host that does not support h_add_logical_lan_buffers(), the hypercall returns H_FUNCTION. In that case, the driver transparently disables batching, resets rx_buffers_per_hcall to 1, and falls back to the single-buffer hcall in next future replenishments to take care of these and future buffers. Test were done on systems with firmware that both supports and does not support the new h_add_logical_lan_buffers hcall. On supported firmware, this reduces hypercall overhead significantly over multiple buffers. SAR measurements showed about a 15% improvement in packet processing rate under moderate RX load, with heavier traffic seeing gains more than 30% Signed-off-by: Mingming Cao <mmc@linux.ibm.com> Reviewed-by: Brian King <bjking1@linux.ibm.com> Reviewed-by: Haren Myneni <haren@linux.ibm.com> Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250719091356.57252-1-mmc@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22platform/x86/amd: pmc: Add Lenovo Yoga 6 13ALC6 to pmc quirk listMario Limonciello
The Lenovo Yoga 6 13ACL6 82ND has a similar BIOS problem as other Lenovo laptops from that vintage that causes a rather long resume from suspend. Add it to the quirk list that manipulates the scratch register to avoid the issue. Reported-by: Adam Berglund <adam.f.berglund@hotmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4434 Tested-by: Adam Berglund <adam.f.berglund@hotmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250718172307.1928744-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22platform/x86: dell-uart-backlight: Use blacklight power constantThomas Zimmermann
The backlight subsystem has gotten its own power constants. Replace FB_BLANK_UNBLANK with BACKLIGHT_POWER_ON. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250715122643.137027-2-tzimmermann@suse.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-07-22Merge back earlier thermal control updates for 6.17Rafael J. Wysocki
2025-07-22Merge tag 'thermal-v6.17-rc1' of ↵Rafael J. Wysocki
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux Merge thermal driver updates for 6.17-rc1 from Daniel Lezcano: "- Enable the stage 2 shutdown and support to more SPMI variants (Anjelique Melendez) - Constify thermal_zone_device_ops structure when possible in the different thermal drivers (Christophe Jaillet) - Use the dev_fwnode() helper instead of of_fwnode_handle() which is more adequate wherever is possible in the thermal drivers (Jiri Slaby) - Implement and document One-Time Programmable fuse support for the Rockchip driver in order to increase the precision of the measurements (Nicolas Frattaroli) - Change the way the Mediatek LTVS driver stores the initialization data sequence to support different sequences regarding the current platform. Introduce the mt7988 support with a new initialization sequence (Mason Chang) - Document the QCom TSens Milos Temperature Sensor DT bindings (Luca Weiss) - Add the fallback compatible string for MT7981 and MT8516 DT bindings (Aleksander Jan Bajkowski) - Add the compatible string for Tegra210B01 SOC_THERM driver (Aaron Kling)" * tag 'thermal-v6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: dt-bindings: thermal: tegra: Document Tegra210B01 dt-bindings: thermal: mediatek: Add fallback compatible string for MT7981 and MT8516 dt-bindings: thermal: qcom-tsens: document the Milos Temperature Sensor thermal/drivers/mediatek/lvts_thermal: Add mt7988 lvts commands thermal/drivers/mediatek/lvts_thermal: Add lvts commands and their sizes to driver data thermal/drivers/mediatek/lvts_thermal: Change lvts commands array to static const thermal/drivers/rockchip: Support reading trim values from OTP dt-bindings: thermal: rockchip: document otp thermal trim thermal/drivers/rockchip: Support RK3576 SoC in the thermal driver dt-bindings: rockchip-thermal: Add RK3576 compatible thermal/drivers/rockchip: Rename rk_tsadcv3_tshut_mode thermal: Use dev_fwnode() thermal: Constify struct thermal_zone_device_ops thermal/drivers/loongson2: Constify struct thermal_zone_device_ops thermal/drivers/qcom-spmi-temp-alarm: Add support for LITE PMIC peripherals thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 2 PMIC peripherals thermal/drivers/qcom-spmi-temp-alarm: Prepare to support additional Temp Alarm subtypes thermal/drivers/qcom-spmi-temp-alarm: Add temp alarm data struct based on HW subtype thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
2025-07-22genirq: Prevent migration live lock in handle_edge_irq()Thomas Gleixner
Yicon reported and Liangyan debugged a live lock in handle_edge_irq() related to interrupt migration. If the interrupt affinity is moved to a new target CPU and the interrupt is currently handled on the previous target CPU for edge type interrupts the handler might get stuck on the previous target: CPU 0 (previous target) CPU 1 (new target) handle_edge_irq() repeat: handle_event() handle_edge_irq() if (INPROGESS) { set(PENDING); mask(); return; } if (PENDING) { clear(PENDING); unmask(); goto repeat; } The migration in software never completes and CPU0 continues to handle the pending events forever. This happens when the device raises interrupts with a high rate and always before handle_event() completes and before the CPU0 handler can clear INPROGRESS so that CPU1 sets the PENDING flag over and over. This has been observed in virtual machines. Prevent this by checking whether the CPU which observes the INPROGRESS flag is the new affinity target. If that's the case, do not set the PENDING flag and wait for the INPROGRESS flag to be cleared instead, so that the new interrupt is handled on the new target CPU and the previous CPU is released from the action. This is restricted to the edge type handler and only utilized on systems, which use single CPU targets for interrupt affinity. Reported-by: Yicong Shen <shenyicong.1023@bytedance.com> Reported-by: Liangyan <liangyan.peng@bytedance.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Liangyan <liangyan.peng@bytedance.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/all/20250701163558.2588435-1-liangyan.peng@bytedance.com Link: https://lore.kernel.org/all/20250718185312.076515034@linutronix.de
2025-07-22genirq: Split up irq_pm_check_wakeup()Thomas Gleixner
Let the calling code check for the IRQD_WAKEUP_ARMED flag to prepare for a live lock mitigation in the edge type handler. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Liangyan <liangyan.peng@bytedance.com> Link: https://lore.kernel.org/all/20250718185312.012392426@linutronix.de
2025-07-22genirq: Move irq_wait_for_poll() to call siteThomas Gleixner
Move it to the call site so that the waiting for the INPROGRESS flag can be reused by an upcoming mitigation for a potential live lock in the edge type handler. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Liangyan <liangyan.peng@bytedance.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/all/20250718185311.948555026@linutronix.de
2025-07-22genirq: Remove pointless local variableThomas Gleixner
The variable is only used at one place, which can simply take the constant as function argument. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Liangyan <liangyan.peng@bytedance.com> Link: https://lore.kernel.org/all/20250718185311.884314473@linutronix.de
2025-07-22timekeeping: Zero initialize system_counterval when querying time from phc ↵Markus Blöchl
drivers Most drivers only populate the fields cycles and cs_id of system_counterval in their get_time_fn() callback for get_device_system_crosststamp(), unless they explicitly provide nanosecond values. When the use_nsecs field was added to struct system_counterval, most drivers did not care. Clock sources other than CSID_GENERIC could then get converted in convert_base_to_cs() based on an uninitialized use_nsecs field, which usually results in -EINVAL during the following range check. Pass in a fully zero initialized system_counterval_t to cure that. Fixes: 6b2e29977518 ("timekeeping: Provide infrastructure for converting to/from a base clock") Signed-off-by: Markus Blöchl <markus@blochl.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <jstultz@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20250720-timekeeping_uninit_crossts-v2-1-f513c885b7c2@blochl.de
2025-07-22wifi: mac80211: fix unassigned variable accessAntonio Quartulli
In ieee80211_latest_active_link_conn_timeout() we loop over all sta->links in order to compute the timeout expiring last across all links. Such timeout is stored in `latest_timeout` which is used in the time_after() comparison before having been initialized. Fix this behaviour by initializing the variable to `jiffies` and adapt surrouding conditions accordingly. Note that the caller assumed latest_timeout to be 0 if no active link was found. This is not appropriate because jiffies=0 is a valid (and recurrent, although not often) point in time. By using `jiffies` as default value for latest_timeout, we can fix the caller as well. Address-Coverity-ID: 1647986 ("Uninitialized variables (UNINIT)") Fixes: 1bc892d76a6f ("wifi: mac80211: extend connection monitoring for MLO") Signed-off-by: Antonio Quartulli <antonio@mandelbit.com> Link: https://patch.msgid.link/20250722120634.3501-1-antonio@mandelbit.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-22Revert "drm/nouveau: check ioctl command codes better"Arnd Bergmann
My previous patch ended up causing a regression for the DRM_IOCTL_NOUVEAU_NVIF ioctl. The intention of my patch was to only pass ioctl commands that have the correct dir/type/nr bits into the nouveau_abi16_ioctl() function. This turned out to be too strict, as userspace does use at least write-only and write-read direction settings. Checking for both of these still did not fix the issue, so the best we can do for the 6.16 release is to revert back to what we've had since linux-3.16. This version is still fragile, but at least it is known to work with existing userspace. Fixing this properly requires a better understanding of what commands are being passed from userspace in practice, and how that relies on the undocumented (miss)behavior in nouveau_drm_ioctl(). Fixes: e5478166dffb ("drm/nouveau: check ioctl command codes better") Reported-by: Satadru Pramanik <satadru@gmail.com> Closes: https://lore.kernel.org/lkml/CAFrh3J85tsZRpOHQtKgNHUVnn=EG=QKBnZTRtWS8eWSc1K1xkA@mail.gmail.com/ Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com> Closes: https://lore.kernel.org/lkml/aH9n_QGMFx2ZbKlw@debian.local/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20250722115830.2587297-1-arnd@kernel.org [ Add Closes: tags, fix minor typo in commit message. - Danilo ] Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-07-22Merge branch 'icc-milos' into icc-nextGeorgi Djakov
Add documentation and driver for the interconnect on the Milos SoC. * icc-milos dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC interconnect: qcom: Add Milos interconnect provider driver Link: https://lore.kernel.org/r/20250709-sm7635-icc-v3-0-c446203c3b3a@fairphone.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2025-07-22interconnect: qcom: Add Milos interconnect provider driverLuca Weiss
Add driver for the Qualcomm interconnect buses found in Milos based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20250709-sm7635-icc-v3-2-c446203c3b3a@fairphone.com [georgi: remove null termination of nodes and links] Signed-off-by: Georgi Djakov <djakov@kernel.org>
2025-07-22ASoC: SDCA: Shrink detected_mode_handler() stack frameCharles Keepax
The stack frame for detected_mode_handler() is a bit large. Dynamically allocate the control value struct, which is most of the size, to avoid this. Fixes: b9ab3b618241 ("ASoC: SDCA: Add some initial IRQ handlers") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507182222.OLgOy9fX-lkp@intel.com/ Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250722102305.2513755-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-22ASoC: SDCA: Check devm_mutex_init() return valueStephen Rothwell
Fix interaction with commit daec29dcc873 ("locking/mutex: Mark devm_mutex_init() as __must_check"), add return value check. There is no need for additional complex error handling here, failure to init the mutex means the code can't progress, so the failure just needs to be passed up to the caller. Fixes: b126394d9ec6 ("ASoC: SDCA: Generic interrupt support") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250722102754.2514351-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-22can: netlink: can_changelink(): fix NULL pointer deref of struct ↵Marc Kleine-Budde
can_priv::do_set_mode Andrei Lalaev reported a NULL pointer deref when a CAN device is restarted from Bus Off and the driver does not implement the struct can_priv::do_set_mode callback. There are 2 code path that call struct can_priv::do_set_mode: - directly by a manual restart from the user space, via can_changelink() - delayed automatic restart after bus off (deactivated by default) To prevent the NULL pointer deference, refuse a manual restart or configure the automatic restart delay in can_changelink() and report the error via extack to user space. As an additional safety measure let can_restart() return an error if can_priv::do_set_mode is not set instead of dereferencing it unchecked. Reported-by: Andrei Lalaev <andrey.lalaev@gmail.com> Closes: https://lore.kernel.org/all/20250714175520.307467-1-andrey.lalaev@gmail.com Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://patch.msgid.link/20250718-fix-nullptr-deref-do_set_mode-v1-1-0b520097bb96@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2025-07-22Merge tag 'md-6.17-20250722' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into for-6.17/block Pull MD updates from Yu: "- call del_gendisk synchronously, from Xiao - cleanup unused variable, from John - cleanup workqueue flags, from Ryo - fix faulty rdev can't be removed during resync, from Qixing" * tag 'md-6.17-20250722' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux: md/raid10: fix set but not used variable in sync_request_write() md: allow removing faulty rdev during resync md/raid5: unset WQ_CPU_INTENSIVE for raid5 unbound workqueue md: remove/add redundancy group only in level change md: Don't clear MD_CLOSING until mddev is freed md: call del_gendisk in control path
2025-07-22Merge tag 'nvme-6.17-2025-07-22' of git://git.infradead.org/nvme into ↵Jens Axboe
for-6.17/block Pull NVMe updates from Christoph: "- try PCIe function level reset on init failure (Keith Busch) - log TLS handshake failures at error level (Maurizio Lombardi) - pci-epf: do not complete commands twice if nvmet_req_init() fails (Rick Wertenbroek) - misc cleanups (Alok Tiwari)" * tag 'nvme-6.17-2025-07-22' of git://git.infradead.org/nvme: nvme-pci: try function level reset on init failure nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails nvme-tcp: log TLS handshake failures at error level docs: nvme: fix grammar in nvme-pci-endpoint-target.rst nvme: fix typo in status code constant for self-test in progress nvmet: remove redundant assignment of error code in nvmet_ns_enable() nvme: fix incorrect variable in io cqes error message nvme: fix multiple spelling and grammar issues in host drivers
2025-07-22ip6_gre: Factor out common ip6gre tunnel match into helperYue Haibing
Extract common ip6gre tunnel match from ip6gre_tunnel_lookup() into new helper function ip6gre_tunnel_match() to reduce code duplication. No functional change intended. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250719081551.963670-1-yuehaibing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flagPrashant Malani
AMU counters on certain CPPC-based platforms tend to yield inaccurate delivered performance measurements on systems that are idle/mostly idle. This results in an inaccurate frequency being stored by cpufreq in its policy structure when the CPU is brought online. [1] Consequently, if the userspace governor tries to set the frequency to a new value, there is a possibility that it would be the erroneous value stored earlier. In such a scenario, cpufreq would assume that the requested frequency has already been set and return early, resulting in the correct/new frequency request never making it to the hardware. Since the operating frequency is liable to this sort of inconsistency, mark the CPPC driver with CPUFREQ_NEED_UPDATE_LIMITS so that it is always invoked when a target frequency update is requested. Link: https://lore.kernel.org/linux-pm/20250619000925.415528-3-pmalani@google.com/ [1] Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Prashant Malani <pmalani@google.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://patch.msgid.link/20250722055611.130574-2-pmalani@google.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-07-22arm64: Kconfig: Keep selects somewhat alphabetically orderedCatalin Marinas
Recent patches selecting HAVE_RELIABLE_STACKTRACE and HAVE_LIVEPATCH added them to the end of the ARM64 Kconfig select list. Move them around to keep this list nearly alphabetically ordered. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2025-07-22ACPI/PCI: Remove space before newlineColin Ian King
There is an extraneous space before a newline in an acpi_handle_debug() message. Remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250721145952.2601422-1-colin.i.king@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-07-22net/sched: sch_qfq: Avoid triggering might_sleep in atomic context in ↵Xiang Mei
qfq_delete_class might_sleep could be trigger in the atomic context in qfq_delete_class. qfq_destroy_class was moved into atomic context locked by sch_tree_lock to avoid a race condition bug on qfq_aggregate. However, might_sleep could be triggered by qfq_destroy_class, which introduced sleeping in atomic context (path: qfq_destroy_class->qdisc_put->__qdisc_destroy->lockdep_unregister_key ->might_sleep). Considering the race is on the qfq_aggregate objects, keeping qfq_rm_from_agg in the lock but moving the left part out can solve this issue. Fixes: 5e28d5a3f774 ("net/sched: sch_qfq: Fix race condition on qfq_aggregate") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Xiang Mei <xmei5@asu.edu> Link: https://patch.msgid.link/4a04e0cc-a64b-44e7-9213-2880ed641d77@sabinyo.mountain Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/20250717230128.159766-1-xmei5@asu.edu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22arm64: signal: Remove ISB when resetting POR_EL0Kevin Brodsky
POR_EL0 is set to its most permissive value before setting up the signal frame, to ensure that uaccess succeeds regardless of the signal stack's pkey. We are now tolerant to spurious POE faults. This means that we do not strictly need to issue an ISB after updating POR_EL0, even when followed by uaccess. The question is whether a fault is likely to happen or not if the ISB is omitted; in this case the answer seems to be no. If the regular stack is used, then it should already be accessible. If the alternate signal stack is used, then a special (inaccessible) pkey may be used - the assumption is that this situation is very uncommon. Remove the ISB to speed up the regular path - this should not have any functional impact regardless of the scenario. Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Link: https://lore.kernel.org/r/20250619160042.2499290-3-kevin.brodsky@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2025-07-22ALSA: usb-audio: qcom: Adjust mutex unlock orderErick Karanja
The mutexes qdev_mutex and chip->mutex are acquired in that order throughout the driver. To preserve proper lock hierarchy and avoid potential deadlocks, they must be released in the reverse order of acquisition. This change reorders the unlock sequence to first release chip->mutex followed by qdev_mutex, ensuring consistency with the locking pattern. [ fixed the code indentations and Fixes tag by tiwai ] Fixes: 326bbc348298a ("ALSA: usb-audio: qcom: Introduce QC USB SND offloading support") Signed-off-by: Erick Karanja <karanja99erick@gmail.com> Link: https://patch.msgid.link/20250721114554.1666104-1-karanja99erick@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-07-22Merge branch 'gve-af_xdp-zero-copy-for-dqo-rda'Paolo Abeni
Joshua Washington says: ==================== gve: AF_XDP zero-copy for DQO RDA This patch series adds support for AF_XDP zero-copy in the DQO RDA queue format. XSK infrastructure is updated to re-post buffers when adding XSK pools because XSK umem will be posted directly to the NIC, a departure from the bounce buffer model used in GQI QPL. A registry of XSK pools is introduced to prevent the usage of XSK pools when in copy mode. v1: https://lore.kernel.org/netdev/20250714160451.124671-1-jeroendb@google.com/ ==================== Link: https://patch.msgid.link/20250717152839.973004-1-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22gve: implement DQO RX datapath and control path for AF_XDP zero-copyJoshua Washington
Add the RX datapath for AF_XDP zero-copy for DQ RDA. The RX path is quite similar to that of the normal XDP case. Parallel methods are introduced to properly handle XSKs instead of normal driver buffers. To properly support posting from XSKs, queues are destroyed and recreated, as the driver was initially making use of page pool buffers instead of the XSK pool memory. Expose support for AF_XDP zero-copy, as the TX and RX datapaths both exist. Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-6-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22gve: implement DQO TX datapath for AF_XDP zero-copyJoshua Washington
In the descriptor clean path, a number of changes need to be made to accommodate out of order completions and double completions. The XSK stack can only handle completions being processed in order, as a single counter is incremented in xsk_tx_completed to sigify how many XSK descriptors have been completed. Because completions can come back out of order in DQ, a separate queue of XSK descriptors must be maintained. This queue keeps the pending packets in the order that they were written so that the descriptors can be counted in xsk_tx_completed in the same order. For double completions, a new pending packet state and type are introduced. The new type, GVE_TX_PENDING_PACKET_DQO_XSK, plays an anlogous role to pre-existing _SKB and _XDP_FRAME pending packet types for XSK descriptors. The new state, GVE_PACKET_STATE_XSK_COMPLETE, represents packets for which no more completions are expected. This includes packets which have received a packet completion or reinjection completion, as well as packets whose reinjection completion timer have timed out. At this point, such packets can be counted as part of xsk_tx_completed() and freed. Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-5-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22gve: keep registry of zc xsk pools in netdev_privJoshua Washington
Relying on xsk_get_pool_from_qid for getting whether zero copy is enabled on a queue is erroneous, as an XSK pool is registered in xp_assign_dev whether AF_XDP zero-copy is enabled or not. This becomes problematic when queues are restarted in copy mode, as all RX queues with XSKs will register a pool, causing the driver to exercise the zero-copy codepath. This patch adds a bitmap to keep track of which queues have zero-copy enabled. Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-4-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22gve: merge xdp and xsk registrationJoshua Washington
The existence of both of these xdp_rxq and xsk_rxq is redundant. xdp_rxq can be used in both the zero-copy mode and the copy mode case. XSK pool memory model registration is prioritized over normal memory model registration to ensure that memory model registration happens only once per queue. Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-3-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22gve: deduplicate xdp info and xsk pool registration logicJoshua Washington
The XDP registration path currently has a lot of reused logic, leading changes to the codepaths to be unnecessarily complex. gve_reg_xsk_pool extracts the logic of registering an XSK pool with a queue into a method that can be used by both XDP_SETUP_XSK_POOL and gve_reg_xdp_info. gve_unreg_xdp_info is used to undo XDP info registration in the error path instead of explicitly unregistering the XDP info, as it is more complete and idempotent. This patch will be followed by other changes to the XDP registration logic, and will simplify those changes due to the use of common methods. Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Joshua Washington <joshwash@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250717152839.973004-2-jeroendb@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-22selftests/futex: Fix spelling mistake "Succeffuly" -> "Successfully"Colin Ian King
There is a spelling mistake in a ksft_exit_fail_msg() message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250715130627.1907017-1-colin.i.king@gmail.com
2025-07-22selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_tCynthia Huang
The kernel does not provide sys_futex() on 32-bit architectures that do not support 32-bit time representations, such as riscv32. As a result, glibc cannot define SYS_futex, causing compilation failures in tests that rely on this syscall. Define SYS_futex as SYS_futex_time64 in such cases to ensure successful compilation and compatibility. Signed-off-by: Cynthia Huang <cynthia@andestech.com> Signed-off-by: Ben Zong-You Xie <ben717@andestech.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/all/20250710103630.3156130-1-ben717@andestech.com
2025-07-22sched/idle: Remove play_idle()Feng Lee
play_idle() is no longer in use, so delete it. Signed-off-by: Feng Lee <379943137@qq.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/tencent_C3E0BD9B812C27A30FC49F1EA6A4B1352707@qq.com
2025-07-22rust: io: fix broken intra-doc links to `platform::Device`Miguel Ojeda
`platform` is not accessible from here. Thus fix the intra-doc links by qualifying the paths a bit more. Fixes: 1d0d4b28513b ("rust: io: mem: add a generic iomem abstraction") Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Link: https://lore.kernel.org/r/20250722085500.1360401-2-ojeda@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-07-22rust: io: fix broken intra-doc link to missing `flags` moduleMiguel Ojeda
There is no `mod flags` in this case, unlike others. Instead, they are associated constants for the `Flags` type. Thus reword the sentence to fix the broken intra-doc link, providing an example of constant and linking to it to clarify which ones we are referring to. Fixes: 493fc33ec252 ("rust: io: add resource abstraction") Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Link: https://lore.kernel.org/r/20250722085500.1360401-1-ojeda@kernel.org Signed-off-by: Danilo Krummrich <dakr@kernel.org>
2025-07-22arch/powerpc: Remove .interp section in vmlinuxChristophe Leroy
When building with CONFIG_RELOCATABLE, there is a .interp section which contains the name of the expected ELF interpreter: Contents of section .interp: c0000000021c1bac 2f757372 2f6c6962 2f6c642e 736f2e31 /usr/lib/ld.so.1 c0000000021c1bbc 00 . That information is useless and even likely wrong. Remove it. Link: https://github.com/linuxppc/issues/issues/434 Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/eeaf8fd6628a75d19872ab31cf7e7179e2baef5e.1751366959.git.christophe.leroy@csgroup.eu
2025-07-22powerpc: Drop GPL boilerplate text with obsolete FSF addressThomas Huth
The FSF does not reside in the Franklin street anymore, so we should not request the people to write to this address. Fortunately, these header files already contain a proper SPDX license identifier, so it should be fine to simply drop all of this license boilerplate code here. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250711072553.198777-1-thuth@redhat.com
2025-07-22powerpc: Don't use %pK through printkThomas Weißschuh
In the past %pK was preferable to %p as it would not leak raw pointer values into the kernel log. Since commit ad67b74d2469 ("printk: hash addresses printed with %p") the regular %p has been improved to avoid this issue. Furthermore, restricted pointers ("%pK") were never meant to be used through printk(). They can still unintentionally leak raw pointers or acquire sleeping locks in atomic contexts. Switch to the regular pointer formatting which is safer and easier to reason about. Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/ Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250718-restricted-pointers-powerpc-v2-1-fd7bddd809f3@linutronix.de
2025-07-22wifi: mac80211: don't require cipher and keylen in gtk rekeyMiri Korenblit
ieee80211_add_gtk_rekey receives a keyconf as an argument, and the cipher and keylen are taken from there to the new allocated key. But in rekey, both the cipher and the keylen should be the same as of the old key, so let ieee80211_add_gtk_rekey find those, so drivers won't have to fill it in. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250721214922.3c5c023bfae9.Ie6594ae2b4b6d5b3d536e642b349046ebfce7a5d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-22wifi: nl80211: Set num_sub_specs before looping through sub_specsKees Cook
The processing of the struct cfg80211_sar_specs::sub_specs flexible array requires its counter, num_sub_specs, to be assigned before the loop in nl80211_set_sar_specs(). Leave the final assignment after the loop in place in case fewer ended up in the array. Fixes: aa4ec06c455d ("wifi: cfg80211: use __counted_by where appropriate") Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/20250721183125.work.183-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-22wifi: mac80211: Write cnt before copying in ieee80211_copy_rnr_beacon()Kees Cook
While I caught the need for setting cnt early in nl80211_parse_rnr_elems() in the original annotation of struct cfg80211_rnr_elems with __counted_by, I missed a similar pattern in ieee80211_copy_rnr_beacon(). Fix this by moving the cnt assignment to before the loop. Fixes: 7b6d7087031b ("wifi: cfg80211: Annotate struct cfg80211_rnr_elems with __counted_by") Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/20250721182521.work.540-kees@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-22kselftest/arm64: Handle attempts to disable SM on SME only systemsMark Brown
The ABI for disabling streaming mode via ptrace is to do a write via the SVE register set. Following the recent round of fixes to the ptrace code we don't support this operation on systems without SVE, which is detected as failures by fp-ptrace. Update the program so that it knows that this operation is not currently supported. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20250718-arm64-fp-ptrace-sme-only-v1-3-3b96dd19a503@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2025-07-22kselftest/arm64: Fix SVE write data generation for SME only systemsMark Brown
fp-ptrace does not handle SME only systems correctly when generating data, on SME only systems scenarios where we are not in streaming mode will not have an expected vector length. This leads to attempts to do memcpy()s of zero byte arrays which can crash, fix this by skipping generation of SVE data for cases where we do not expect to have an active vector length. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20250718-arm64-fp-ptrace-sme-only-v1-2-3b96dd19a503@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2025-07-22kselftest/arm64: Test SME on SME only systems in fp-ptraceMark Brown
When checking that the vector extensions are supported fp-ptrace currently only checks for SVE being supported which means that we get into a confused half configured state for SME only systems. Check for SME as well. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20250718-arm64-fp-ptrace-sme-only-v1-1-3b96dd19a503@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
generated by cgit (git 2.34.1) at 2025-09-17 07:02:12 +0000