summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-19net: qmi_wwan: fix build error due to cdc-wdm dependecyBjørn Mork
Fixes: drivers/built-in.o: In function `qmi_wwan_bind_shared': qmi_wwan.c:(.text+0x25b686): undefined reference to `usb_cdc_wdm_register' make[1]: *** [.tmp_vmlinux1] Error 1 Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19netdev: driver: ethernet: Add TI CPSW driverMugunthan V N
This patch adds support for TI's CPSW driver. The three port switch gigabit ethernet subsystem provides ethernet packet communication and can be configured as an ethernet switch. Supports 10/100/1000 Mbps. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sriramakrishnan A G <srk@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19netdev: driver: ethernet: add cpsw address lookup engine supportMugunthan V N
TI CPSW ethernet switch has a built-in address lookup engine. This patch adds the code necessary for programming this module. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19phy: add am79c874 PHY supportHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19mlx4_core: fix race on comm channelEugenia Emantayev
Prevent race condition between commands on comm channel. Happened while unloading the driver when switching from event to polling mode. VF got completion on the last command before switching to polling mode, but toggle was not changed. After the fix - VF will not write the next command before toggle is updated. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bonding: send igmp report for its masterPeter Pan(潘卫平)
Liang Zheng(lzheng@redhat.com) found that in the following topo, bonding does not send igmp report when we trigger a fail-over of bonding. eth0-- |-- bond0 -- br0 eth1-- modprobe bonding mode=1 miimon=100 resend_igmp=10 ifconfig bond0 up ifenslave bond0 eth0 eth1 brctl addbr br0 ifconfig br0 192.168.100.2/24 up brctl addif br0 bond0 Add 192.168.100.2(br0) into a multicast group, like 224.10.10.10, then trigger a fali-over in bonding. You can see that parameter "resend_igmp" does not work. The reason is that when we add br0 into a multicast group, it does not propagate multicast knowledge down to its ports. If we choose to propagate multicast knowledge down to all ports for bridge, then we have to track every change that is done to bridge, and keep a backup for all ports. It is hard to track, I think. Instead I choose to modify bonding to send igmp report for its master. Changelog: V2: correct comments V3: move this check into bond_resend_igmp_join_requests() V4: only send igmp reports if bond is enslaved to a bridge Signed-off-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19fs_enet: Add MPC5125 FEC support and PHY interface selectionVladimir Ermakov
Add compatible string for MPC5125 FEC. The FEC on MPC5125 additionally supports RMII PHY interface. Configure controller/PHY interface type according to the optional phy-connection-type property in the ethernet node. This property should be either "rmii" or "mii". Signed-off-by: Vladimir Ermakov <vooon341@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19net: bpf_jit: fix BPF_S_LDX_B_MSH compilationEric Dumazet
Matt Evans spotted that x86 bpf_jit was incorrectly handling negative constant offsets in BPF_S_LDX_B_MSH instruction. We need to abort JIT compilation like we do in common_load so that filter uses the interpreter code and can call __load_pointer() Reference: http://lists.openwall.net/netdev/2011/07/19/11 Thanks to Indan Zupancic to bring back this issue. Reported-by: Matt Evans <matt@ozlabs.org> Reported-by: Indan Zupancic <indan@nul.nu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19net: update the usage of CHECKSUM_UNNECESSARYYi Zou
As suggested by Ben, this adds the clarification on the usage of CHECKSUM_UNNECESSARY on the outgoing patch. Also add the usage description of NETIF_F_FCOE_CRC and CHECKSUM_UNNECESSARY for the kernel FCoE protocol driver. This is a follow-up to the following: http://patchwork.ozlabs.org/patch/147315/ Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: www.Open-FCoE.org <devel@open-fcoe.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on txYi Zou
Fix a bug when using 'ethtool -K ethx tx off' to turn off tx ip checksum, FCoE CRC offload should not be impacte. The skb_checksum_help() is needed only if it's not FCoE traffic for ip checksum, regardless of ethtool toggling the tx ip checksum on or off. Instead of using CHECKSUM_PARTIAL, we will use CHECKSUM_UNNECESSARY as a proper indication to avoid sw ip checksum on FCoE frames. Ref. to original discussion thread: http://patchwork.ozlabs.org/patch/146567/ CC: "James E.J. Bottomley" <JBottomley@parallels.com> CC: Robert Love <robert.w.love@intel.com> Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gsoYi Zou
This is related to fixing the bug of dropping FCoE frames when disabling tx ip checksum by 'ethtool -K ethx tx off'. The FCoE protocol stack driver would use CHECKSUM_UNNECESSARY on tx path instead of CHECKSUM_PARTIAL (as indicated in the 2/2 of this series). To do so, netif_needs_gso() has to be changed here to not do gso for both CHECKSUM_PARTIAL and CHECKSUM_UNNECESSARY. Ref. to original discussion thread: http://patchwork.ozlabs.org/patch/146567/ Signed-off-by: Yi Zou <yi.zou@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19ixgbe: Fix issues with SR-IOV loopback when flow control is disabledAlexander Duyck
This patch allows us to avoid a Tx hang when SR-IOV is enabled. This hang can be triggered by sending small packets at a rate that was triggering Rx missed errors from the adapter while the internal Tx switch and at least one VF are enabled. This was all due to the fact that under heavy stress the Rx FIFO never drained below the flow control high water mark. This resulted in the Tx FIFO being head of line blocked due to the fact that it relies on the flow control high water mark to determine when it is acceptable for the Tx to place a packet in the Rx FIFO. The resolution for this is to set the FCRTH value to the RXPBSIZE - 32 so that even if the ring is almost completely full we can still place Tx packets on the Rx ring and drop incoming Rx traffic if we do not have sufficient space available in the Rx FIFO. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19net/hyperv: Fix the code handling tx busyHaiyang Zhang
Instead of dropping the packet, we keep the skb buffer, and return NETDEV_TX_BUSY to let upper layer retry send. This will not cause endless loop, because the host is taking data away from ring buffer, and we have called the stop_queue before returning NETDEV_TX_BUSY. The stop_queue was called in the function netvsc_send() in file netvsc.c, then it returns to rndis_filter_send(), which returns to netvsc_start_xmit() in file netvsc_drv.c. So the NETDEV_TX_BUSY is indeed returned AFTER queue is stopped. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
2012-03-19ixgbe: fix namespace issues when FCoE/DCB is not enabledJeff Kirsher
Resolve namespace issues when FCoE or DCB is not enabled. The issue is with certain configurations we end up with namespace problems. A simple example: ixgbe_main.c - defines func A() - uses func A() ixgbe_fcoe.c - uses func A() ixgbe.h - has prototype for func A() For default (FCoE included) all is good. But when it isn't the namespace checker complains about how func A() could be static. To resolve this, created a ixgbe_lib file to contain functions used by DCB/FCoE and their helper functions so that they are always in namespace whether or not DCB/FCoE is enabled. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
2012-03-19rtlwifi: Remove unused ETH_ADDR_LEN definesJoe Perches
Just neatening. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19igbvf: Use ETH_ALENJoe Perches
Remove an unnecessary #define and use memcpy instead of a loop to copy an ethernet address. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19atlx: Use ETH_ALENJoe Perches
No need for yet another #define for this. Convert NODE_ADDRESS_SIZE use to ETH_ALEN and remove #define. Use memcpy instead of a loop to copy an address. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19if_vlan: Remove VLAN_ETH_ALEN define and the 1 use of itJoe Perches
Just use ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19tcp: reduce out_of_order memory useEric Dumazet
With increasing receive window sizes, but speed of light not improved that much, out of order queue can contain a huge number of skbs, waiting to be moved to receive_queue when missing packets can fill the holes. Some devices happen to use fat skbs (truesize of 4096 + sizeof(struct sk_buff)) to store regular (MTU <= 1500) frames. This makes highly probable sk_rmem_alloc hits sk_rcvbuf limit, which can be 4Mbytes in many cases. When limit is hit, tcp stack calls tcp_collapse_ofo_queue(), a true latency killer and cpu cache blower. Doing the coalescing attempt each time we add a frame in ofo queue permits to keep memory use tight and in many cases avoid the tcp_collapse() thing later. Tested on various wireless setups (b43, ath9k, ...) known to use big skb truesize, this patch removed the "packets collapsed in receive queue due to low socket buffer" I had before. This also reduced average memory used by tcp sockets. With help from Neal Cardwell. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19tcp: introduce tcp_data_queue_ofoEric Dumazet
Split tcp_data_queue() in two parts for better readability. tcp_data_queue_ofo() is responsible for queueing incoming skb into out of order queue. Change code layout so that the skb_set_owner_r() is performed only if skb is not dropped. This is a preliminary patch before "reduce out_of_order memory use" following patch. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: validate FW trace prior to its printingDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: consistent statistics for old FWYuval Mintz
Previously applied patch making the bnx2x statistics consistent did not apply to old FWs. This remedies it, extending the consistent behaviour to all drivers. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Reported-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: changed iscsi/fcoe mac init and macrosDmitry Kravkov
This includes changes in macros to better distinguish between the two protocols, and slightly changed the way their macs are set. Notice this file contains string print lines with more than 80 characters, as to not break prints. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: added TLV_NOT_FOUND flags to the dcbDmitry Kravkov
The new error flags are supported by the bnx2x FW. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: changed initial dcb configurationDmitry Kravkov
The changes were mostly made to enable back-to-back data flow with dcb. Other changes were simply deemed as a better 'clean' initial configuration. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: removed dcb unused codeYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: reduced sparse warningsYuval Mintz
This patch reduces sparse warnings in the bnx2x code, mostly by changing functions into static and changing initialization of structures. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: revised driver printsMerav Sicron
We've revised driver prints, changing the mask of existing prints to allow better control over the debug messages, added prints to error scenarios, removed unnecessary prints and corrected some spelling. Please note that this patch contains lines with over 80 characters, as string messages were kept in a single line. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: added 'likely' to fast-path skb existenceYuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19be2net: fix programming of VLAN tags for VFAjit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19be2net: Fix number of vlan slots in flex modeAjit Khaparde
In flex10 mode the number of vlan slots supported is halved. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19be2net: Program secondary UC MAC address into MAC filterAjit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19be2net: enable WOL by default if h/w supports itAjit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19Merge branch 'gianfar-bql' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
2012-03-19ixgbe: Correct flag values set by ixgbe_fix_featuresAlexander Duyck
This patch replaces the variable name data with the variable name features for ixgbe_fix_features and ixgbe_set_features. This helps to make some issues more obvious such as the fact that we were disabling Rx VLAN tag stripping when we should have been forcing it to be enabled when DCB is enabled. In addition there was deprecated code present that was disabling the LRO flag if we had the itr value set too low. I have updated this logic so that we will now allow the LRO flag to be set, but will not enable RSC until the rx-usecs value is high enough to allow enough time for Rx packet coalescing. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-03-19ASoC: wm8994: Provide VMID mode control and fix default sequenceMark Brown
The optimal management of VMID depends on a number of factors which vary dynamically at runtime, for example the connection to a system docking station. In some circumstances it is desirable to keep VMID enabled all the time, in others it is desirable to aggressively power it up and down. Provide a callback allowing machine driver to configure either the normal power up/down mode (WM8994_VMID_MODE_NORMAL) or to maintain VMID even when idle (WM8994_VMID_MODE_FORCE). This callback, wm8994_vmid_mode(), should be called with the CODEC lock. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-19ASoC: wm8994: Add missing break in resumeMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-19ASoC: wm_hubs: Don't actively manage LINEOUT_VMID_BUFMark Brown
It can just be enabled all the time with no impact. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-19Merge tag 'topic/twl' into regulator-nextMark Brown
TWL specific changes, cross-merged with OMAP due to arch/arm wanting to use the new ability to override the voltage set and get operations to support the in-CPU voltage management. The other changes are minor fixes, the addition of a few new regulators and device tree support.
2012-03-19Merge branches 'cma', 'cxgb3', 'cxgb4', 'ehca', 'iser', 'mad', 'nes', 'qib', ↵Roland Dreier
'srp' and 'srpt' into for-next
2012-03-19Merge branch 'stable/cleancache.v13' into linux-nextKonrad Rzeszutek Wilk
* stable/cleancache.v13: mm: cleancache: Use __read_mostly as appropiate. mm: cleancache: report statistics via debugfs instead of sysfs. mm: zcache/tmem/cleancache: s/flush/invalidate/ mm: cleancache: s/flush/invalidate/
2012-03-19MAINTAINERS: Adding cleancache API to the list.Konrad Rzeszutek Wilk
.. and electing myself as the maintainer. Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-19ASoC: pxa-ssp: atomically set stream active masksDaniel Mack
PXA's SSP engine fails to take its current channel phase into account when enabling a stream while the engine is already running. This results in randomly swapped left/right channels on either the record or the playback side, depending on which one was enabled first. The following patch fixes this by factoring out the bit field modifications in question to a separate function that pauses the engine temporarily, modifies the bits and kicks it off again afterwards. Appearantly, a transition of SSCR0_SSE syncs both directions properly. The patch has been rolled out to quite a number of devices over the last weeks and seems to fix the issue reliably. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-03-19x86: Fix section warningsSteffen Persvold
Fix the following section warnings : WARNING: vmlinux.o(.text+0x49dbc): Section mismatch in reference from the function acpi_map_cpu2node() to the variable .cpuinit.data:__apicid_to_node The function acpi_map_cpu2node() references the variable __cpuinitdata __apicid_to_node. This is often because acpi_map_cpu2node lacks a __cpuinitdata annotation or the annotation of __apicid_to_node is wrong. WARNING: vmlinux.o(.text+0x49dc1): Section mismatch in reference from the function acpi_map_cpu2node() to the function .cpuinit.text:numa_set_node() The function acpi_map_cpu2node() references the function __cpuinit numa_set_node(). This is often because acpi_map_cpu2node lacks a __cpuinit annotation or the annotation of numa_set_node is wrong. WARNING: vmlinux.o(.text+0x526e77): Section mismatch in reference from the function prealloc_protection_domains() to the function .init.text:alloc_passthrough_domain() The function prealloc_protection_domains() references the function __init alloc_passthrough_domain(). This is often because prealloc_protection_domains lacks a __init annotation or the annotation of alloc_passthrough_domain is wrong. Signed-off-by: Steffen Persvold <sp@numascale.com> Link: http://lkml.kernel.org/r/1331810188-24785-1-git-send-email-sp@numascale.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-19Merge branch 'pm-domains'Rafael J. Wysocki
* pm-domains: PM / Domains: Check domain status during hibernation restore of devices
2012-03-19PM / Domains: Check domain status during hibernation restore of devicesRafael J. Wysocki
Power domains that were off before hibernation shouldn't be turned on during device restore, so prevent that from happening. This change fixes up commit 65533bbf63b4f37723fdfedc73d0653958973323 PM / Domains: Fix hibernation restore of devices, v2 that didn't include it by mistake. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-19ixgbe: Add support for enabling UDP RSS via the ethtool rx-flow-hash commandAlexander Duyck
This patch adds support for enabling or disabling UDP RSS via the ethtool -N rx-flow-hash command. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-03-19ixgbe: Whitespace cleanupsAlexander Duyck
This patch contains several fixes for formatting in regards to whitespace. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-03-19ixgbe: Two minor fixes for RSS and FDIR set queues functionsAlexander Duyck
This change fixes two minor issues. The first was the fact that we were setting the return value to false twice in the set_rss_queues function. The second is the fact that we should have been using "min_t(int," instead of "min((int)" in set_fdir_queues. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-19 04:14:56 +0000