summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-23arm64: dts: rockchip: remove I2S1 TDM node for the NanoPi R5 seriesTianling Shen
This is for the audio output which does not exist on the boards. Also disable regulator-always-on for vccio_acodec since it's only used by the audio output. Signed-off-by: Tianling Shen <cnsztl@gmail.com> Link: https://lore.kernel.org/r/20230318083745.6181-6-cnsztl@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-03-23arm64: dts: rockchip: fix gmac support for NanoPi R5STianling Shen
- Changed phy-mode to rgmii. - Fixed pull type in pinctrl for gmac0. - Removed duplicate properties in mdio node. These properties are defined in the gmac0 node already. Signed-off-by: Tianling Shen <cnsztl@gmail.com> Link: https://lore.kernel.org/r/20230318083745.6181-5-cnsztl@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-03-23arm64: dts: rockchip: Add FriendlyARM NanoPi R5CTianling Shen
FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device. Specification: - Rockchip RK3568 - 1/4GB LPDDR4X RAM - 8/32GB eMMC - SD card slot - M.2 Connector - 2x USB 3.0 Port - 2x 2500 Base-T (PCIe, r8125) - HDMI 2.0 - MIPI DSI/CSI - USB Type C 5V Signed-off-by: Tianling Shen <cnsztl@gmail.com> Link: https://lore.kernel.org/r/20230318083745.6181-4-cnsztl@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-03-23dt-bindings: Add doc for FriendlyARM NanoPi R5CTianling Shen
Add devicetree binding documentation for the FriendlyARM NanoPi R5C. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Tianling Shen <cnsztl@gmail.com> Link: https://lore.kernel.org/r/20230318083745.6181-3-cnsztl@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-03-23arm64: dts: rockchip: create common dtsi for NanoPi R5 seriesTianling Shen
Create common dtsi for the FriendlyElec NanoPi R5 series. Signed-off-by: Tianling Shen <cnsztl@gmail.com> Link: https://lore.kernel.org/r/20230318083745.6181-2-cnsztl@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-03-22arm64: dts: qcom: sc8280xp-x13s: add wifi calibration variantJohan Hovold
Describe the bus topology for PCIe domain 6 and add the ath11k calibration variant so that the board file (calibration data) can be loaded. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216246 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230321094011.9759-3-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: add hid 1.8V suppliesJohan Hovold
All the input devices use s10b as 1.8V supply. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-7-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: add pmic regulator suppliesJohan Hovold
The s11b, s12b, s1c and bob supplies are used by several pmic regulators. Add the missing description to the devicetree. Note that there are still some consumers that are not (fully) described in the devicetree so the supplies must remain marked as always-on for now. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-6-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-onJohan Hovold
The bob supply is used by several pmic regulators and components which are not (yet fully) described in the devicetree. Mark the regulator as always-on for now. Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-5-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-onJohan Hovold
The s12b supply is used by several pmic regulators as well as the wlan/bluetooth radio which are not yet fully described in the devicetree. Mark the regulator as always-on for now. Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-4-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-onJohan Hovold
The s10b supply is used by several components that are not (yet) described in devicetree (e.g. ram, charger, ec) and must not be disabled. Mark the regulator as always-on. Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support") Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-3-johan+linaro@kernel.org
2023-03-22arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-onJohan Hovold
The s11b supply is used by the wlan module (as well as some of the pmics) which are not yet fully described in the devicetree. Mark the regulator as always-on for now. Fixes: 123b30a75623 ("arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller") Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230322113318.17908-2-johan+linaro@kernel.org
2023-03-22arm64: dts: mediatek: Initial mt8365-evk supportFabien Parent
This adds minimal support for the Mediatek 8365 SOC and the EVK reference board, allowing the board to boot to initramfs with serial port I/O. Signed-off-by: Fabien Parent <fparent@baylibre.com> [bero@baylibre.com: Removed parts depending on drivers that aren't upstream yet, cleanups, add CPU cache layout, add systimer, fix GIC] Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com> [aouledameur@baylibre.com: Fix systimer properties] Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230309213501.794764-4-bero@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2023-03-22ARM: dts: meson8m2: mxiii-plus: Enable Bluetooth and WiFi supportMartin Blumenstingl
The MXIII Plus uses an Ampak AP6330 Bluetooth and WiFi combo chip. Bluetooth is connected to &uart_A and requires toggling GPIOX_20. WiFi can be routed to either &sdhc or &sdio. Route WiFi to &sdhc since &sdio is already connected to the SD card. Additionally WiFi requires toggling GPIOX_11 and GPIOAO_6 as well as enabling the 32kHz clock signal. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230321171213.2808460-4-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-22ARM: dts: meson8: add the SDXC_A pinsMartin Blumenstingl
Add the pins for the SDHC MMC controller which connect to the SDIO wifi on some boards. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230321171213.2808460-3-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-22ARM: dts: meson8: add the xtal_32k_out pinMartin Blumenstingl
GPIOX_10 can generate a 32768Hz signal when enabling the "xtal_32k_out" group with the xtal function. This is typically used as LPO clock for the SDIO wifi chips. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230321171213.2808460-2-martin.blumenstingl@googlemail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-21arm64: dts: qcom: sm8450-hdk: align WCD9385 reset pin with downstream configKrzysztof Kozlowski
Downstream DTS uses 16 mA drive strength for the WCD9385 audio codec RESET_N reset pin. It also pulls the pin down in shutdown mode, thus it is more like a shutdown pin, not a reset. Use the same settings here for HDK8450 and keep the WCD9385 by default in powered off (so pin as low). Align the name of pin configuration node with other pins in the DTS. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308183317.559253-2-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8450-hdk: use precise WCD9385 compatibleKrzysztof Kozlowski
The HDK8450 uses WCD9385 audio codec, so use precise compatible, even though WCD9380 and WCD9385 are both compatible. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308183317.559253-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8450-hdk: use recommended drive strength for speaker SD_NKrzysztof Kozlowski
Downstream DTS (and sc8280xp-lenovo-thinkpad-x13s with the same speakers) uses 16 mA drive strength for the WSA8835 speaker SD_N reset/shutdown pin. Use the same for HDK8450, as it is seem the recommended value. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308142712.277659-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8150: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-8-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sm6350: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-7-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sm6115: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-6-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sdm845: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-5-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sc7180: Add SoC-specific compatible to cpufreq_hwKonrad Dybcio
Add a SoC-specific compatbile to cpufreq_hw for compliancy with bindings. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230308-topic-cpufreq_bindings-v1-4-3368473ec52d@linaro.org
2023-03-21arm64: dts: qcom: sdm845-oneplus-common: add Hall sensorGergo Koteles
Enable the Hall effect sensor (flip cover) for OnePlus 6/6T. The GPIO is mapped to SW_LID events as in msm8916, msm8994, msm8998 devices. Signed-off-by: Gergo Koteles <soyer@irl.hu> Reviewed-by: Caleb Connolly <caleb@connolly.tech> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306174147.185239-1-soyer@irl.hu
2023-03-21arm64: dts: qcom: drop redundant line breaksKrzysztof Kozlowski
Remove trailing, redundant line breaks. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306081430.28491-2-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sdm845-db845c: drop empty node overrideKrzysztof Kozlowski
Drop empty override of pm8998_gpios. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306081430.28491-1-krzysztof.kozlowski@linaro.org
2023-03-21ARM: dts: qcom: sdx55: add dedicated SDX55 TCSR compatibleKrzysztof Kozlowski
syscon should not be used alone as compatible. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230306072618.10770-2-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: pm660: align thermal node names with bindingsKrzysztof Kozlowski
Bindings expect thermal node names to end with '-thermal', so fix pm660 and pm660l: sda660-inforce-ifc6560.dtb: thermal-zones: 'pm660', 'pm660l' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230305154308.241651-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8350-microsoft-surface: fix USB dual-role mode propertyKrzysztof Kozlowski
The "dr_mode" is a property of USB DWC3 node, not the Qualcomm wrapper one: sm8350-microsoft-surface-duo2.dtb: usb@a6f8800: 'dr_mode' does not match any of the regexes: '^usb@[0-9a-f]+$', 'pinctrl-[0-9]+' Fixes: c16160cfa565 ("arm64: dts: qcom: add minimal DTS for Microsoft Surface Duo 2") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304130315.51595-2-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sm8250-xiaomi-elish: fix USB maximum speed propertyKrzysztof Kozlowski
Fix typo in USB DWC3 node maximum speed property. Fixes: a41b617530bf ("arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230304130315.51595-1-krzysztof.kozlowski@linaro.org
2023-03-21arm64: dts: qcom: sa8775p-ride: enable the BT UART portBartosz Golaszewski
Enable the high-speed UART port connected to the Bluetooth controller on the sa8775p-adp development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-10-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p-ride: enable the GNSS UART portBartosz Golaszewski
Enable the high-speed UART port connected to the GNSS controller on the sa8775p-adp development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-9-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p: add high-speed UART nodesBartosz Golaszewski
Add two UART nodes that are known to be used by existing development boards with this SoC. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-8-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p-ride: enable the SPI nodeBartosz Golaszewski
Enable the SPI interface exposed on the sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-7-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p: add the spi16 nodeBartosz Golaszewski
Add the SPI controller node for the interface exposed on the sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-6-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p-ride: enable i2c18Bartosz Golaszewski
This enables the I2C interface on the sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-5-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p: add the i2c18 nodeBartosz Golaszewski
Add a disabled node for the I2C interface that's exposed on the sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-4-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p-ride: enable QUPv3 #2Bartosz Golaszewski
Enable the second instance of the QUPv3 engine on the sa8775p-ride board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-3-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: sa8775p: add the QUPv3 #2 nodeBartosz Golaszewski
Add the second instance of the QUPv3 engine to the sa8775p.dtsi. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230309103752.173541-2-brgl@bgdev.pl
2023-03-21arm64: dts: qcom: pm8150l: add spmi-flash-led nodeDanila Tikhonov
Add a node describing the flash block found on pm8150l. Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230321182319.24958-1-danila@jiaxyga.com
2023-03-21arm64: dts: qcom: sdm845: Fix the BAM DMA engine compatible stringBhupesh Sharma
As per documentation, Qualcomm SDM845 SoC supports BAM DMA engine v1.7.4, so use the correct compatible strings. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230321190118.3327360-2-bhupesh.sharma@linaro.org
2023-03-21arm64: dts: qcom: sm8550-mtp: add pmic glink nodeNeil Armstrong
Add the pmic glink node linked with the DWC3 USB controller switched to OTG mode and tagged with usb-role-switch. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-11-552f3b721f9e@linaro.org
2023-03-21arm64: dts: qcom: sm8450-hdk: add pmic glink nodeNeil Armstrong
Add the pmic glink node linked with the DWC3 USB controller switched to OTG mode and tagged with usb-role-switch. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-10-552f3b721f9e@linaro.org
2023-03-21arm64: dts: qcom: sm8350-hdk: add pmic glink nodeNeil Armstrong
Add the pmic glink node linked with the DWC3 USB controller switched to OTG mode and tagged with usb-role-switch. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-9-552f3b721f9e@linaro.org
2023-03-21arm64: dts: qcom: sm8550: add port subnodes in dwc3 nodeNeil Armstrong
Add ports subnodes in dwc3 node to avoid repeating the same description in each board DT. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-8-552f3b721f9e@linaro.org
2023-03-21arm64: dts: qcom: sm8450: add port subnodes in dwc3 nodeNeil Armstrong
Add ports subnodes in dwc3 node to avoid repeating the same description in each board DT. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-7-552f3b721f9e@linaro.org
2023-03-21arm64: dts: qcom: sm8350: add port subnodes in dwc3 nodeNeil Armstrong
Add ports subnodes in dwc3 node to avoid repeating the same description in each board DT. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-6-552f3b721f9e@linaro.org
2023-03-20dt-bindings: arm: ti: Add BeaglePlayRobert Nelson
This board is based on ti,am625 https://beagleplay.org/ https://git.beagleboard.org/beagleplay/beagleplay Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230316152143.2438928-2-nm@ti.com Co-developed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
2023-03-20arm64: dts: ti: k3-j7200: Add overlay to enable CPSW5G ports in QSGMII modeSiddharth Vadapalli
The J7 Quad Port Add-On Ethernet Card for J7200 Common-Proc-Board supports QSGMII mode. Use the overlay to configure CPSW5G ports in QSGMII mode. Add support to reset the PHY from kernel by using gpio-hog and gpio-reset. Add aliases for CPSW5G ports to enable kernel to fetch MAC addresses directly from U-Boot. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20230315062307.1612220-5-s-vadapalli@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
generated by cgit (git 2.34.1) at 2025-09-28 15:17:42 +0000