| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit 13437c91606c9232c747475e202fe3827cd53264.
Reason to revert: idle power regression found in testing.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Leo Zeng <Leo.Zeng@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
create_validate_stream_for_sink
Don't try to operate on a drm_wb_connector as an amdgpu_dm_connector.
While dereferencing aconnector->base will "work" it's wrong and
might lead to unknown bad things. Just... don't.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
By default, DCN HW is in idle optimized state which does not allow access
to PHY registers. If BIOS powers up the DCN, it is fine because they will
power up everything. Only exit idle optimized state when not taking control
from VBIOS.
Fixes: be704e5ef4bd ("Revert "drm/amd/display: Exit idle optimizations before attempt to access PHY"")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
During disabling the transcoder in DP 128b/132b mode (both in case of an
MST master transcoder and in case of SST) the transcoder function must
be first disabled without changing any other field in the register (in
particular leaving the DDI port and mode select fields unchanged) and
clearing the DDI port and mode select fields separately, later during
the disabling sequences. Fix the sequence accordingly.
Bspec: 54128, 65448, 68849
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: 79a6734cd56e ("drm/i915/ddi: disable trancoder port select for 128b/132b SST")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-3-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 2ed653c7b843db0670136330480842d76cb65cd8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
At the end of a 128b/132b link training sequence, the HW expects the
transcoder training pattern to be set to TPS2 and from that to normal
mode (disabling the training pattern). Transitioning from TPS1 directly
to normal mode leaves the transcoder in a stuck state, resulting in
page-flip timeouts later in the modeset sequence.
Atm, in case of a failure during link training, the transcoder may be
still set to output the TPS1 pattern. Later the transcoder is then set
from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading
to modeset failures later as described above. Fix this by setting the
training patter to TPS2, if the link training failed at any point.
The clue in the specification about the above HW behavior is the
explicit mention that TPS2 must be set after the link training sequence
(and there isn't a similar requirement specified for the 8b/10b link
training), see the Bspec links below.
v2: Add bspec aspect/link to the commit log. (Jani)
Bspec: 54128, 65448, 68849
Cc: stable@vger.kernel.org # v5.18+
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8b4bbaf8ddc1f68f3ee96a706f65fdb1bcd9d355)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
During disabling the transcoder in DP 128b/132b mode (both in case of an
MST master transcoder and in case of SST) the transcoder function must
be first disabled without changing any other field in the register (in
particular leaving the DDI port and mode select fields unchanged) and
clearing the DDI port and mode select fields separately, later during
the disabling sequences. Fix the sequence accordingly.
Bspec: 54128, 65448, 68849
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: 79a6734cd56e ("drm/i915/ddi: disable trancoder port select for 128b/132b SST")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-3-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
At the end of a 128b/132b link training sequence, the HW expects the
transcoder training pattern to be set to TPS2 and from that to normal
mode (disabling the training pattern). Transitioning from TPS1 directly
to normal mode leaves the transcoder in a stuck state, resulting in
page-flip timeouts later in the modeset sequence.
Atm, in case of a failure during link training, the transcoder may be
still set to output the TPS1 pattern. Later the transcoder is then set
from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading
to modeset failures later as described above. Fix this by setting the
training patter to TPS2, if the link training failed at any point.
The clue in the specification about the above HW behavior is the
explicit mention that TPS2 must be set after the link training sequence
(and there isn't a similar requirement specified for the 8b/10b link
training), see the Bspec links below.
v2: Add bspec aspect/link to the commit log. (Jani)
Bspec: 54128, 65448, 68849
Cc: stable@vger.kernel.org # v5.18+
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Error handling was wrong, causing unhandled transaction restart errors.
check_directory_size() was also inefficient, since keys in multiple
snapshots would be iterated over once for every snapshot. Convert it to
the same scheme used for i_sectors and subdir count checking.
Cc: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When compiling without CONFIG_IA32_EMULATION, there can be some errors:
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘mailbox_release_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:197:2: error: implicit declaration
of function ‘kfree’.
197 | kfree(mb_msg);
| ^~~~~
drivers/accel/amdxdna/amdxdna_mailbox.c: In function ‘xdna_mailbox_send_msg’:
drivers/accel/amdxdna/amdxdna_mailbox.c:418:11: error:implicit declaration
of function ‘kzalloc’.
418 | mb_msg = kzalloc(sizeof(*mb_msg) + pkg_size, GFP_KERNEL);
| ^~~~~~~
Add the missing include.
Fixes: b87f920b9344 ("accel/amdxdna: Support hardware mailbox")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211015354.3388171-1-suhui@nfschina.com
|
|
The issue was caused by dput(upper) being called before
ovl_dentry_update_reval(), while upper->d_flags was still
accessed in ovl_dentry_remote().
Move dput(upper) after its last use to prevent use-after-free.
BUG: KASAN: slab-use-after-free in ovl_dentry_remote fs/overlayfs/util.c:162 [inline]
BUG: KASAN: slab-use-after-free in ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
ovl_dentry_remote fs/overlayfs/util.c:162 [inline]
ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167
ovl_link_up fs/overlayfs/copy_up.c:610 [inline]
ovl_copy_up_one+0x2105/0x3490 fs/overlayfs/copy_up.c:1170
ovl_copy_up_flags+0x18d/0x200 fs/overlayfs/copy_up.c:1223
ovl_rename+0x39e/0x18c0 fs/overlayfs/dir.c:1136
vfs_rename+0xf84/0x20a0 fs/namei.c:4893
...
</TASK>
Fixes: b07d5cc93e1b ("ovl: update of dentry revalidate flags after copy up")
Reported-by: syzbot+316db8a1191938280eb6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=316db8a1191938280eb6
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20250214215148.761147-1-kovalev@altlinux.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
directory nodes
If the reparse point was not handled (indicated by the -EOPNOTSUPP from
ops->parse_reparse_point() call) but reparse tag is of type name surrogate
directory type, then treat is as a new mount point.
Name surrogate reparse point represents another named entity in the system.
From SMB client point of view, this another entity is resolved on the SMB
server, and server serves its content automatically. Therefore from Linux
client point of view, this name surrogate reparse point of directory type
crosses mount point.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
parse_reparse_point()
This would help to track and detect by caller if the reparse point type was
processed or not.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
POSIX extensions
If a file size has bits 0x410 = ATTR_DIRECTORY | ATTR_REPARSE set
then during queryinfo (stat) the file is regarded as a directory
and subsequent opens can fail. A simple test example is trying
to open any file 1040 bytes long when mounting with "posix"
(SMB3.1.1 POSIX/Linux Extensions).
The cause of this bug is that Attributes field in smb2_file_all_info
struct occupies the same place that EndOfFile field in
smb311_posix_qinfo, and sometimes the latter struct is incorrectly
processed as if it was the first one.
Reported-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Tested-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with flexible-array members in the
middle of other structs, we use the `__struct_group()` helper to
separate the flexible arrays from the rest of the members in the
flexible structures. We then use the newly created tagged `struct
smb2_file_link_info_hdr` and `struct smb2_file_rename_info_hdr`
to replace the type of the objects causing trouble: `rename_info`
and `link_info` in `struct smb2_compound_vars`.
We also want to ensure that when new members need to be added to the
flexible structures, they are always included within the newly created
tagged structs. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
So, with these changes, fix 86 of the following warnings:
fs/smb/client/cifsglob.h:2335:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/smb/client/cifsglob.h:2334:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Due to job transitions, both Joel and Jeremy can no longer maintain
the FSI subsystem. I will take over.
I also replaced Alistair with Ninad as a reviewer, as Alistair doesn't
have access to hardware and hasn't been active.
I also removed the link to Joel's FSI tree as he won't be maintaining
it.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Link: https://lore.kernel.org/r/20250213225746.2159118-1-eajames@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drm_atomic_helper_wait_for_flip_done()
drm_atomic_helper_wait_for_flip_done() will wait for pages flips on all
CRTCs affected by a given commit. It takes the drm_atomic_state being
committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-26-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_cleanup_done()
drm_atomic_helper_wait_for_dependencies() is the final part of a commit
and signals it completion. It takes the drm_atomic_state being committed
as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-25-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_cleanup_planes() is one of the final part of a commit,
and will free up all plane resources used in the previous commit. It
takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-24-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_wait_for_vblanks() waits for vblank events on all the
CRTCs affected by a commit. It takes the drm_atomic_state being
committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-23-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_hw_done() signals hardware completion of a
given commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-22-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_fake_vblank() fake a vblank event if needed when a new
commit is being applied. It takes the drm_atomic_state being committed
as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-21-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_writebacks()
drm_atomic_helper_commit_writebacks() updates all writeback connectors
affected by a new commit. It takes the drm_atomic_state being committed
as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-20-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_bridge_chain_enable() enables all bridges affected by a new
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-19-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_bridge_chain_pre_enable() enables all bridges affected by
a new commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-18-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_modeset_enables()
drm_atomic_helper_commit_modeset_enables() enables all outputs affected
by a new commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-17-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_planes() updates all planes affected by a new
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-16-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
crtc_set_mode() deals with calling the modeset related hooks for CRTC,
connectors and bridges if and when a new commit changes them. It takes
the drm_atomic_state being committed as a parameter.
However, that parameter name is called as old_state, which is pretty
confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-15-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_update_legacy_modeset_state()
drm_atomic_helper_update_legacy_modeset_state() updates all the legacy
modeset pointers a connector, encoder or CRTC might have with the ones
being setup by a given commit. It takes the drm_atomic_state being
committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-14-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_bridge_chain_post_disable() disables all bridges affected by
a new commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-13-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_bridge_chain_disable() disables all bridges affected by a new
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-12-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
disable_outputs() disables all connectors and CRTCs affected by a
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called as old_state, which is pretty
confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-11-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_modeset_disables() disables all the outputs affected
by a commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-10-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_tail_rpm() is the final part of an atomic
commit, and is given the state being committed as a parameter.
However, that parameter is named old_state, but documented as the "new
modeset state" which is all super confusing.
Let's rename that parameter to state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-9-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_tail() is the final part of an atomic commit,
and is given a parameter with the drm_atomic_state being committed.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-8-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_wait_for_dependencies()
drm_atomic_helper_wait_for_dependencies() waits for all the dependencies
a commit has before going forward with it. It takes the drm_atomic_state
being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-7-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Even though the commit_tail () drm_atomic_state parameter is called
old_state, it's actually the state being committed which is confusing.
It's even more confusing since the atomic_commit_tail hook being called
by commit_tail() parameter is called state.
Let's rename the variable from old_state to state to make it less
confusing.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-6-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_post_disable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-5-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_disable hook prototype to pass
it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_enable hook prototype to pass it
directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_pre_enable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-2-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
After some discussions on the mailing-list for an earlier revision of
the series, it was suggested to document the evolution of
drm_atomic_state and its use by drivers to explain some of the confusion
one might still encounter when reading the framework code.
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/dri-devel/Z4jtKHY4qN3RNZNG@phenom.ffwll.local/
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-1-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
xe_exec_queue_create_ioctl() performs a lookup of the xe_gt for the GT
ID passed from userspace, but the result is never actually used. Since
there's already a separate (and earlier) check that the ID passed from
userspace is valid, the unnecessary lookup can be removed.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218200511.4050060-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
IO_NODE_ALLOC_CACHE_MAX has been unused since commit fbbb8e991d86
("io_uring/rsrc: get rid of io_rsrc_node allocation cache") removed the
rsrc_node_cache.
IO_RSRC_TAG_TABLE_SHIFT and IO_RSRC_TAG_TABLE_MASK have been unused
since commit 7029acd8a950 ("io_uring/rsrc: get rid of per-ring
io_rsrc_node list") removed the separate tag table for registered nodes.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20250219033444.2020136-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This allows ntsync to be usuable by non-root processes out of the box
Signed-off-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20250214122759.2629-2-mike@fireburn.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are multiple places from where the recovery work gets scheduled
asynchronously. Also, there are multiple places where the caller waits
synchronously for the recovery to be completed. One such place is during
the PM shutdown() callback.
If the device is not alive during recovery_work, it will try to reset the
device using pci_reset_function(). This function internally will take the
device_lock() first before resetting the device. By this time, if the lock
has already been acquired, then recovery_work will get stalled while
waiting for the lock. And if the lock was already acquired by the caller
which waits for the recovery_work to be completed, it will lead to
deadlock.
This is what happened on the X1E80100 CRD device when the device died
before shutdown() callback. Driver core calls the driver's shutdown()
callback while holding the device_lock() leading to deadlock.
And this deadlock scenario can occur on other paths as well, like during
the PM suspend() callback, where the driver core would hold the
device_lock() before calling driver's suspend() callback. And if the
recovery_work was already started, it could lead to deadlock. This is also
observed on the X1E80100 CRD.
So to fix both issues, use pci_try_reset_function() in recovery_work. This
function first checks for the availability of the device_lock() before
trying to reset the device. If the lock is available, it will acquire it
and reset the device. Otherwise, it will return -EAGAIN. If that happens,
recovery_work will fail with the error message "Recovery failed" as not
much could be done.
Cc: stable@vger.kernel.org # 5.12
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/mhi/Z1me8iaK7cwgjL92@hovoldconsulting.com
Fixes: 7389337f0a78 ("mhi: pci_generic: Add suspend/resume/recovery procedure")
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Analyzed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/mhi/Z2KKjWY2mPen6GPL@hovoldconsulting.com/
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20250108-mhi_recovery_fix-v1-1-a0a00a17da46@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
It is observed that on some systems an initial PPM reset during the boot
phase can trigger a timeout:
[ 6.482546] ucsi_acpi USBC000:00: failed to reset PPM!
[ 6.482551] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed
Still, increasing the timeout value, albeit being the most straightforward
solution, eliminates the problem: the initial PPM reset may take up to
~8000-10000ms on some Lenovo laptops. When it is reset after the above
period of time (or even if ucsi_reset_ppm() is not called overall), UCSI
works as expected.
Moreover, if the ucsi_acpi module is loaded/unloaded manually after the
system has booted, reading the CCI values and resetting the PPM works
perfectly, without any timeout. Thus it's only a boot-time issue.
The reason for this behavior is not clear but it may be the consequence
of some tricks that the firmware performs or be an actual firmware bug.
As a workaround, increase the timeout to avoid failing the UCSI
initialization prematurely.
Fixes: b1b59e16075f ("usb: typec: ucsi: Increase command completion timeout value")
Cc: stable <stable@kernel.org>
Signed-off-by: Fedor Pchelkin <boddah8794@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250217105442.113486-3-boddah8794@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For the ACPI backend of UCSI the UCSI "registers" are just a memory copy
of the register values in an opregion. The ACPI implementation in the
BIOS ensures that the opregion contents are synced to the embedded
controller and it ensures that the registers (in particular CCI) are
synced back to the opregion on notifications. While there is an ACPI call
that syncs the actual registers to the opregion there is rarely a need to
do this and on some ACPI implementations it actually breaks in various
interesting ways.
The only reason to force a sync from the embedded controller is to poll
CCI while notifications are disabled. Only the ucsi core knows if this
is the case and guessing based on the current command is suboptimal, i.e.
leading to the following spurious assertion splat:
WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi]
CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1
Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023
Workqueue: events_long ucsi_init_work [typec_ucsi]
RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi]
Call Trace:
<TASK>
ucsi_init_work+0x3c/0xac0 [typec_ucsi]
process_one_work+0x179/0x330
worker_thread+0x252/0x390
kthread+0xd2/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Thus introduce a ->poll_cci() method that works like ->read_cci() with an
additional forced sync and document that this should be used when polling
with notifications disabled. For all other backends that presumably don't
have this issue use the same implementation for both methods.
Fixes: fa48d7e81624 ("usb: typec: ucsi: Do not call ACPI _DSM method for UCSI read operations")
Cc: stable <stable@kernel.org>
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Tested-by: Fedor Pchelkin <boddah8794@gmail.com>
Signed-off-by: Fedor Pchelkin <boddah8794@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250217105442.113486-2-boddah8794@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the vendor and product strings to the appropriate entries
of struct drm_bridge and use that in mtk_hdmi_setup_spd_infoframe
instead of having the same as function parameters.
While at it, also beautify the strings, setting them to read
"MediaTek On-Chip HDMI".
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250217154836.108895-25-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
During probe, the TCPC alert interrupts are getting masked to
avoid unwanted interrupts during chip setup: this is ok to do
but there is no unmasking happening at any later time, which
means that the chip will not raise any interrupt, essentially
making it not functional as, while internally it does perform
all of the intended functions, it won't signal anything to the
outside.
Unmask the alert interrupts to fix functionality.
Fixes: ce08eaeb6388 ("staging: typec: rt1711h typec chip driver")
Cc: stable <stable@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250219114700.41700-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the USB gadget will be set as bus-powered based solely
on whether its bMaxPower is greater than 100mA, but this may miss
devices that may legitimately draw less than 100mA but still want
to report as bus-powered. Similarly during suspend & resume, USB
gadget is incorrectly marked as bus/self powered without checking
the bmAttributes field. Fix these by configuring the USB gadget
as self or bus powered based on bmAttributes, and explicitly set
it as bus-powered if it draws more than 100mA.
Cc: stable <stable@kernel.org>
Fixes: 5e5caf4fa8d3 ("usb: gadget: composite: Inform controller driver of self-powered")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250217120328.2446639-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
