summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-15ath9k_hw: fix AR9380 register settings for channel 14Felix Fietkau
Program the ah->ini_japan2484 INI values which were left out by accident Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: fold ar9002_hw_cck_chan14_spread into mode regs initializationFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: remove iniCommon_*_cck_fir_coeff_9271Felix Fietkau
These arrays are unused Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: clean up ath9k_hw_setuprxdescFelix Fietkau
The ATH9K_HW_CAP_AUTOSLEEP check is bogus, the rx status area needs to be cleared on all non-EDMA PCI/AHB based chipsets anyway. Limit the memset to the rx status area to improve performance. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: remove ath9k_hw_gettxintrtxqsFelix Fietkau
The driver can just check the mask directly Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k: optimize register access functionsFelix Fietkau
By checking for NR_CPUS, the compiler can optimize out register access serialization code on non-SMP kernels Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: remove ath9k_hw_getdefantennaFelix Fietkau
The default antenna (as programmed by the INI file) is always 0 anyway. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: remove ath9k_hw_htc_resetinitFelix Fietkau
Automatically set the ah->htc_reset_init on init and after PHY disable. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: clean up tx completion interrupt handlingFelix Fietkau
TXQ_FLAG_TXOKINT_ENABLE and TXQ_FLAG_TXERRINT_ENABLE are always set and used together, and they share the same bitmask in enum ath9k_tx_queue_flags. Simplify the code that tests for these flags. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: simplify tx queue interrupt mask handlingFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15mac80211: make uapsd_* keys per-vifEliad Peller
uapsd_queues and uapsd_max_sp_len are relevant only for managed interfaces, and can be configured differently for each vif. Move them from the local struct to sdata->u.mgd, and update the debugfs functions accordingly. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15mac80211: add NULL terminator to debugfs_netdev write bufEliad Peller
Some debugfs write functions call kstrto* functions, which assume the string is null-terminated. Make it valid by changing ieee80211_if_write() to use static buffer instead of allocating one, and set the last char to NULL. (The write functions try to parse some integer/mac address, so 64 bytes buffer should be enough) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15mac80211: Don't sample max throughput rate in minstrel_htHelmut Schaa
The current max throughput rate is known to be good as otherwise it wouldn't be the max throughput rate. Since rate sampling can introduce some overhead (by adding RTS for example or due to not aggregating the frame) don't sample the max throughput rate. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15rt2x00: rt2800usb: limit tx queues lengthStanislaw Gruszka
TX status fifo is limited to 16 elements. When we send more frames than that, we can easily loose status, what is not good for rate scaling algorithm. On my testing the change does not degrade performance, actually make is slightly better. Additionally with the patch I can see much less various rt2x00 warnings in dmesg. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15rt2x00: rt2800usb: do not check packedid for aggregated framesStanislaw Gruszka
Tx statuses of aggregated subframes contain packetid of first subframe in the AMPDU. We can not identify AMPDU subframes based on packedid, so simply assume that status match first pending frame in the queue. Thats mostly the same what 2800pci do. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15rt2x00: rt2800usb: rework txstatus codeStanislaw Gruszka
Currently we read tx status register after each urb data transfer. As callback procedure also trigger reading, that causing we have many "threads" of reading status. To prevent that introduce TX_STATUS_READING flags, and check if we are already in process of sequential reading TX_STA_FIFO, before requesting new reads. Change timer to hrtimer, that make TX_STA_FIFO overruns less possible. Use 200 us for initial timeout, and then reschedule in 100 us period, this values probably have to be tuned. Make changes on txdone work. Schedule it from rt2800usb_tx_sta_fifo_read_completed() callback when first valid status show up. Check in callback if tx status timeout happens, and schedule work on that condition too. That make possible to remove tx status timeout from generic watchdog. I moved that to rt2800usb. Loop in txdone work, that should prevent situation when we queue work, which is already processed, and after finish work is not rescheduled again. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15rt2x00: rt2800usb: rework txdone codeStanislaw Gruszka
Patch change txdone code to make it similar like txdone in rt2800pci, process only one entry from queue matching tx status. Before we processed all pending entries from queue until PACKEDID match, that caused that we do not report tx statuses correctly. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15rt2x00: rt2800usb: move additional txdone into new functionStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k: Fix multi-VIF BSS handlingSujith Manoharan
mac80211 provides short preamble information and ERP protection information on a per-BSS basis, which can be used. Remove flags stored in the driver, which was incorrect since they were being used in a global manner. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k: Remove aggregation flagsSujith Manoharan
SC_OP_TXAGGR and SC_OP_RXAGGR are not really needed. The HT capabilities of the station and HW can be used instead. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k_hw: Cleanup FastChannelChangeSujith Manoharan
The logic to determine whether to use FCC is a bit convoluted. Use a small helper function to decide whether FCC is to be used. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k: Remove 'other' VIF countSujith Manoharan
It is not needed and will not be used anyway since unsupported interfaces are not allowed to be created. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k: Remove unused variablesSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15ath9k: Remove unnecessary initializationSujith Manoharan
There is no need to mask out SWBA/BMISS from the interrupt mask in start(). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15rt2x00: Set IEEE80211_HW_REPORTS_TX_ACK_STATUS in rt2800Helmut Schaa
rt2800 already reports the tx ack status of each frame back to mac80211. Advertise this by setting IEEE80211_HW_REPORTS_TX_ACK_STATUS for rt2800. This allows some mac80211 features like frame loss notifications to work with rt2800. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15Merge branch 'renesas/fixes' into renesas/socArnd Bergmann
The fixes branch was merged into mainline just after v3.3-rc7, I'm merging it into this branch to fix up a nontrivial merge conflict. Unfortunately this means that we are now based on a commit between -rc releases, which we normally try to avoid. Conflicts: arch/arm/mach-shmobile/board-mackerel.c Resolution suggested by Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15powerpc: Add initial e6500 cpu supportKumar Gala
Add basic support for e6500 core in its single threaded mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-15powerpc/fsl-booke: Fixup calc_cam_sz to support MMU v2Kumar Gala
The registers that describe size supported by TLB are different on MMU v2 as well as we support power of two page sizes. For now we continue to assume that FSL variable size array supports all page sizes up to the maximum one reported in TLB1PS. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-15powerpc/85xx: fix Kconfig warning about missing 8250 dependencyPaul Gortmaker
The SERIAL_8250_EXTENDED option just enables access to other less regularly used options, like SERIAL_8250_SHARE_IRQ. Select it to get rid of this warning when selecting the child option living underneath it. warning: (FSL_SOC_BOOKE && SERIAL_8250_RM9K) selects SERIAL_8250_SHARE_IRQ which has unmet direct dependencies (HAS_IOMEM && SERIAL_8250_EXTENDED) Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-15i2c-algo-bit: Fix spurious SCL timeouts under heavy loadVille Syrjala
When the system is under heavy load, there can be a significant delay between the getscl() and time_after() calls inside sclhi(). That delay may cause the time_after() check to trigger after SCL has gone high, causing sclhi() to return -ETIMEDOUT. To fix the problem, double check that SCL is still low after the timeout has been reached, before deciding to return -ETIMEDOUT. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Cc: stable@vger.kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-15i2c-core: Comment says "transmitted" but means "received"Wolfram Sang
Fix that. Also convert this and the related comment to proper commenting style. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-16ARM: at91: sam9g20 udc add dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-03-16USB: at91: Device udc add dt supportJean-Christophe PLAGNIOL-VILLARD
Allow to compile it if AT91 is enable. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16ARM: at91: dt: enable usb ehci for sam9g45 and sam9x5Jean-Christophe PLAGNIOL-VILLARD
make the ECHI depends on ARCH_AT91 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: devicetree-discuss@lists.ozlabs.org
2012-03-16ARM: at91: usb ehci add dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-16ARM: at91: dt: enable usb ohci for sam9g20, sam9g45 amd sam9x5Jean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: devicetree-discuss@lists.ozlabs.org
2012-03-16ARM: at91: usb ohci add dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15Merge tag 'imx35-cam-fb' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Arnd Bergmann
next/boards * tag 'imx35-cam-fb' of git://git.pengutronix.de/git/imx/linux-2.6: i.MX35-PDK: Add Camera support ARM : mx35: 3ds-board: add framebuffer device
2012-03-15Merge branch 'fixes-non-critical' of git://github.com/hzhuang1/linux into ↵Arnd Bergmann
next/maintainers * 'fixes-non-critical' of git://github.com/hzhuang1/linux: MAINTAINERS: update MAINTAINERS email entry MAINTAINERS: update maintainer entry for pxa/hx4700 (update to v3.3-rc7) Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15Merge branch 'board-specific' of git://github.com/hzhuang1/linux into ↵Arnd Bergmann
next/boards * 'board-specific' of git://github.com/hzhuang1/linux: pxa/hx4700: Remove pcmcia platform_device structure ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35% ARM: pxa/hx4700: Remove unwanted request for GPIO105 (update to 3.3-rc7) Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15Merge branch 'fixes' of git://gitorious.org/linux-davinci/linux-davinci into ↵Arnd Bergmann
next/fixes-non-critical * 'fixes' of git://gitorious.org/linux-davinci/linux-davinci: (2 commits) ARM: davinci: DA850: move da850_register_pm to .init.text ARM: davinci: cpufreq: fix compiler warning (update to v3.3-rc7) Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15iommu/amd: Move interrupt setup code into seperate functionJoerg Roedel
For interrupt remapping the enablement of the IOMMU MSI interrupt needs to be deferred because the IOMMU itself will be initialized before the io-apics are up and running. So the code to setup the MSI is moved seperated from the hardware-setup routine now. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-03-15ARM: at91: add Shutdown Controller (SHDWC) DT supportJean-Christophe PLAGNIOL-VILLARD
Use a string to specific the wakeup mode to make it more readable. Add the Real-time Clock Wake-up support too for sam9g45 and sam9x5. Add AT91_SHDW_CPTWK0_MAX to specific the Max of the Wakeup Counter. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: add ram controller DT supportJean-Christophe PLAGNIOL-VILLARD
We can now drop the call to ioremap_registers() as we have the binding for the SDRAM/DDR Controller. Drop ioremap_registers() for sam9x5 too. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: add RSTC (Reset Controller) dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: always enable sam9 restartJean-Christophe PLAGNIOL-VILLARD
This is need for multiple SoC in the same kernel image and DT. As we will chose the restart function via binding. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91: add pmc DT supportJean-Christophe PLAGNIOL-VILLARD
Specified the main Oscillator via clock binding. This will allow to do not hardcode it anymore in the DT board at 12MHz. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15iommu/amd: Make sure IOMMU interrupts are re-enabled on resumeJoerg Roedel
Unfortunatly the interrupts for the event log and the peripheral page-faults are only enabled at boot but not re-enabled at resume. Fix that. Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-03-15ARM: at91/dt: add specific DT soc initJean-Christophe PLAGNIOL-VILLARD
This will allow to have static Device mapping and DT probe mapping for the System Controller. Temporary keep the call to ioremap_registers() until we have the binding for the SDRAM/DDR Controller. Temporary keep the main clock hardcoded to 12MHz until we have the binding for the PMC. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20Jean-Christophe PLAGNIOL-VILLARD
http://www.calao-systems.com/articles.php?lng=en&pg=6099 this daughter board add the following device: - Micro-SD socket - TTL 3V3 - (Tx/Rx/RTS/CTS) - I2C port - 0.96" Serial OLED Display Module (over UART) - MP3 decoder with Micro & Speakers - 4x PB, 4x Leds (Blue), 3x Leds (Green, Orange, Red) for now we add only the 2 UARTs, 4 Buttons, 7 leds and i2c via DT used_led1 will not be re-add via DT as it's used by the motherboard too Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
generated by cgit (git 2.34.1) at 2025-09-20 18:03:09 +0000