summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-07-23octeontx2-af: Remove unnecessary devm_kfreeSunil Goutham
Remove devm_kfree of memory where VLAN entry to RVU PF mapping info is saved. This will be freed anyway at driver exit. Having this could result in warning from devm_kfree() if the memory is not allocated due to errors in rvu_nix_block_init() before nix_setup_txvlan(). Fixes: 9a946def264d ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23i40e: Fix log TC creation failure when max num of queues is exceededJedrzej Jagielski
Fix missing failed message if driver does not have enough queues to complete TC command. Without this fix no message is displayed in dmesg. Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-23i40e: Fix queue-to-TC mapping on TxJedrzej Jagielski
In SW DCB mode the packets sent receive incorrect UP tags. They are constructed correctly and put into tx_ring, but UP is later remapped by HW on the basis of TCTUPR register contents according to Tx queue selected, and BW used is consistent with the new UP values. This is caused by Tx queue selection in kernel not taking into account DCB configuration. This patch fixes the issue by implementing the ndo_select_queue NDO callback. Fixes: fd0a05ce74ef ("i40e: transmit, receive, and NAPI") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-23i40e: Add additional info to PHY type errorLukasz Cieplicki
In case of PHY type error occurs, the message was too generic. Add additional info to PHY type error indicating that it can be wrong cable connected. Fixes: 124ed15bf126 ("i40e: Add dual speed module support") Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-23i40e: Fix firmware LLDP agent related warningArkadiusz Kubalewski
Make warning meaningful for the user. Previously the trace: "Starting FW LLDP agent failed: error: I40E_ERR_ADMIN_QUEUE_ERROR, I40E_AQ_RC_EAGAIN" was produced when user tried to start Firmware LLDP agent, just after it was stopped with sequence: ethtool --set-priv-flags <dev> disable-fw-lldp on ethtool --set-priv-flags <dev> disable-fw-lldp off (without any delay between the commands) At that point the firmware is still processing stop command, the behavior is expected. Fixes: c1041d070437 ("i40e: Missing response checks in driver when starting/stopping FW LLDP") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-23i40e: Fix logic of disabling queuesArkadiusz Kubalewski
Correct the message flow between driver and firmware when disabling queues. Previously in case of PF reset (due to required reinit after reconfig), the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up occasionally. The error was not a real issue of hardware or firmware, it was caused by wrong sequence of messages invoked by the driver. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-23tracepoints: Update static_call before tp_funcs when adding a tracepointSteven Rostedt (VMware)
Because of the significant overhead that retpolines pose on indirect calls, the tracepoint code was updated to use the new "static_calls" that can modify the running code to directly call a function instead of using an indirect caller, and this function can be changed at runtime. In the tracepoint code that calls all the registered callbacks that are attached to a tracepoint, the following is done: it_func_ptr = rcu_dereference_raw((&__tracepoint_##name)->funcs); if (it_func_ptr) { __data = (it_func_ptr)->data; static_call(tp_func_##name)(__data, args); } If there's just a single callback, the static_call is updated to just call that callback directly. Once another handler is added, then the static caller is updated to call the iterator, that simply loops over all the funcs in the array and calls each of the callbacks like the old method using indirect calling. The issue was discovered with a race between updating the funcs array and updating the static_call. The funcs array was updated first and then the static_call was updated. This is not an issue as long as the first element in the old array is the same as the first element in the new array. But that assumption is incorrect, because callbacks also have a priority field, and if there's a callback added that has a higher priority than the callback on the old array, then it will become the first callback in the new array. This means that it is possible to call the old callback with the new callback data element, which can cause a kernel panic. static_call = callback1() funcs[] = {callback1,data1}; callback2 has higher priority than callback1 CPU 1 CPU 2 ----- ----- new_funcs = {callback2,data2}, {callback1,data1} rcu_assign_pointer(tp->funcs, new_funcs); /* * Now tp->funcs has the new array * but the static_call still calls callback1 */ it_func_ptr = tp->funcs [ new_funcs ] data = it_func_ptr->data [ data2 ] static_call(callback1, data); /* Now callback1 is called with * callback2's data */ [ KERNEL PANIC ] update_static_call(iterator); To prevent this from happening, always switch the static_call to the iterator before assigning the tp->funcs to the new array. The iterator will always properly match the callback with its data. To trigger this bug: In one terminal: while :; do hackbench 50; done In another terminal echo 1 > /sys/kernel/tracing/events/sched/sched_waking/enable while :; do echo 1 > /sys/kernel/tracing/set_event_pid; sleep 0.5 echo 0 > /sys/kernel/tracing/set_event_pid; sleep 0.5 done And it doesn't take long to crash. This is because the set_event_pid adds a callback to the sched_waking tracepoint with a high priority, which will be called before the sched_waking trace event callback is called. Note, the removal to a single callback updates the array first, before changing the static_call to single callback, which is the proper order as the first element in the array is the same as what the static_call is being changed to. Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/ Cc: stable@vger.kernel.org Fixes: d25e37d89dd2f ("tracepoint: Optimize using static_call()") Reported-by: Stefan Metzmacher <metze@samba.org> tested-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-07-23ftrace: Remove redundant initialization of variable retColin Ian King
The variable ret is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Link: https://lkml.kernel.org/r/20210721120915.122278-1-colin.king@canonical.com Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-07-23ftrace: Avoid synchronize_rcu_tasks_rude() call when not necessaryNicolas Saenz Julienne
synchronize_rcu_tasks_rude() triggers IPIs and forces rescheduling on all CPUs. It is a costly operation and, when targeting nohz_full CPUs, very disrupting (hence the name). So avoid calling it when 'old_hash' doesn't need to be freed. Link: https://lkml.kernel.org/r/20210721114726.1545103-1-nsaenzju@redhat.com Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-07-23tracing: Clean up alloc_synth_event()Steven Rostedt (VMware)
alloc_synth_event() currently has the following code to initialize the event fields and dynamic_fields: for (i = 0, j = 0; i < n_fields; i++) { event->fields[i] = fields[i]; if (fields[i]->is_dynamic) { event->dynamic_fields[j] = fields[i]; event->dynamic_fields[j]->field_pos = i; event->dynamic_fields[j++] = fields[i]; event->n_dynamic_fields++; } } 1) It would make more sense to have all fields keep track of their field_pos. 2) event->dynmaic_fields[j] is assigned twice for no reason. 3) We can move updating event->n_dynamic_fields outside the loop, and just assign it to j. This combination makes the code much cleaner. Link: https://lkml.kernel.org/r/20210721195341.29bb0f77@oasis.local.home Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-07-23netfilter: nfnl_hook: fix unused variable warningArnd Bergmann
The only user of this variable is in an #ifdef: net/netfilter/nfnetlink_hook.c: In function 'nfnl_hook_entries_head': net/netfilter/nfnetlink_hook.c:177:28: error: unused variable 'netdev' [-Werror=unused-variable] Fixes: e2cf17d3774c ("netfilter: add new hook nfnl subsystem") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-23tracing/histogram: Rename "cpu" to "common_cpu"Steven Rostedt (VMware)
Currently the histogram logic allows the user to write "cpu" in as an event field, and it will record the CPU that the event happened on. The problem with this is that there's a lot of events that have "cpu" as a real field, and using "cpu" as the CPU it ran on, makes it impossible to run histograms on the "cpu" field of events. For example, if I want to have a histogram on the count of the workqueue_queue_work event on its cpu field, running: ># echo 'hist:keys=cpu' > events/workqueue/workqueue_queue_work/trigger Gives a misleading and wrong result. Change the command to "common_cpu" as no event should have "common_*" fields as that's a reserved name for fields used by all events. And this makes sense here as common_cpu would be a field used by all events. Now we can even do: ># echo 'hist:keys=common_cpu,cpu if cpu < 100' > events/workqueue/workqueue_queue_work/trigger ># cat events/workqueue/workqueue_queue_work/hist # event histogram # # trigger info: hist:keys=common_cpu,cpu:vals=hitcount:sort=hitcount:size=2048 if cpu < 100 [active] # { common_cpu: 0, cpu: 2 } hitcount: 1 { common_cpu: 0, cpu: 4 } hitcount: 1 { common_cpu: 7, cpu: 7 } hitcount: 1 { common_cpu: 0, cpu: 7 } hitcount: 1 { common_cpu: 0, cpu: 1 } hitcount: 1 { common_cpu: 0, cpu: 6 } hitcount: 2 { common_cpu: 0, cpu: 5 } hitcount: 2 { common_cpu: 1, cpu: 1 } hitcount: 4 { common_cpu: 6, cpu: 6 } hitcount: 4 { common_cpu: 5, cpu: 5 } hitcount: 14 { common_cpu: 4, cpu: 4 } hitcount: 26 { common_cpu: 0, cpu: 0 } hitcount: 39 { common_cpu: 2, cpu: 2 } hitcount: 184 Now for backward compatibility, I added a trick. If "cpu" is used, and the field is not found, it will fall back to "common_cpu" and work as it did before. This way, it will still work for old programs that use "cpu" to get the actual CPU, but if the event has a "cpu" as a field, it will get that event's "cpu" field, which is probably what it wants anyway. I updated the tracefs/README to include documentation about both the common_timestamp and the common_cpu. This way, if that text is present in the README, then an application can know that common_cpu is supported over just plain "cpu". Link: https://lkml.kernel.org/r/20210721110053.26b4f641@oasis.local.home Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: 8b7622bf94a44 ("tracing: Add cpu field for hist triggers") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-07-23tracing: Synthetic event field_pos is an index not a booleanSteven Rostedt (VMware)
Performing the following: ># echo 'wakeup_lat s32 pid; u64 delta; char wake_comm[]' > synthetic_events ># echo 'hist:keys=pid:__arg__1=common_timestamp.usecs' > events/sched/sched_waking/trigger ># echo 'hist:keys=next_pid:pid=next_pid,delta=common_timestamp.usecs-$__arg__1:onmatch(sched.sched_waking).trace(wakeup_lat,$pid,$delta,prev_comm)'\ > events/sched/sched_switch/trigger ># echo 1 > events/synthetic/enable Crashed the kernel: BUG: kernel NULL pointer dereference, address: 000000000000001b #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.13.0-rc5-test+ #104 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strlen+0x0/0x20 Code: f6 82 80 2b 0b bc 20 74 11 0f b6 50 01 48 83 c0 01 f6 82 80 2b 0b bc 20 75 ef c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 9 f8 c3 31 RSP: 0018:ffffaa75000d79d0 EFLAGS: 00010046 RAX: 0000000000000002 RBX: ffff9cdb55575270 RCX: 0000000000000000 RDX: ffff9cdb58c7a320 RSI: ffffaa75000d7b40 RDI: 000000000000001b RBP: ffffaa75000d7b40 R08: ffff9cdb40a4f010 R09: ffffaa75000d7ab8 R10: ffff9cdb4398c700 R11: 0000000000000008 R12: ffff9cdb58c7a320 R13: ffff9cdb55575270 R14: ffff9cdb58c7a000 R15: 0000000000000018 FS: 0000000000000000(0000) GS:ffff9cdb5aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001b CR3: 00000000c0612006 CR4: 00000000001706e0 Call Trace: trace_event_raw_event_synth+0x90/0x1d0 action_trace+0x5b/0x70 event_hist_trigger+0x4bd/0x4e0 ? cpumask_next_and+0x20/0x30 ? update_sd_lb_stats.constprop.0+0xf6/0x840 ? __lock_acquire.constprop.0+0x125/0x550 ? find_held_lock+0x32/0x90 ? sched_clock_cpu+0xe/0xd0 ? lock_release+0x155/0x440 ? update_load_avg+0x8c/0x6f0 ? enqueue_entity+0x18a/0x920 ? __rb_reserve_next+0xe5/0x460 ? ring_buffer_lock_reserve+0x12a/0x3f0 event_triggers_call+0x52/0xe0 trace_event_buffer_commit+0x1ae/0x240 trace_event_raw_event_sched_switch+0x114/0x170 __traceiter_sched_switch+0x39/0x50 __schedule+0x431/0xb00 schedule_idle+0x28/0x40 do_idle+0x198/0x2e0 cpu_startup_entry+0x19/0x20 secondary_startup_64_no_verify+0xc2/0xcb The reason is that the dynamic events array keeps track of the field position of the fields array, via the field_pos variable in the synth_field structure. Unfortunately, that field is a boolean for some reason, which means any field_pos greater than 1 will be a bug (in this case it was 2). Link: https://lkml.kernel.org/r/20210721191008.638bce34@oasis.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-07-23arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-modePali Rohár
Some SFP modules are not detected when i2c-fast-mode is enabled even when clock-frequency is already set to 100000. The I2C bus violates the timing specifications when run in fast mode. So disable fast mode on Turris Mox. Same change was already applied for uDPU (also Armada 3720 board with SFP) in commit fe3ec631a77d ("arm64: dts: uDPU: remove i2c-fast-mode"). Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-07-23netfilter: nft_nat: allow to specify layer 4 protocol NAT onlyPablo Neira Ayuso
nft_nat reports a bogus EAFNOSUPPORT if no layer 3 information is specified. Fixes: d07db9884a5f ("netfilter: nf_tables: introduce nft_validate_register_load()") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-23netfilter: conntrack: adjust stop timestamp to real expiry valueFlorian Westphal
In case the entry is evicted via garbage collection there is delay between the timeout value and the eviction event. This adjusts the stop value based on how much time has passed. Fixes: b87a2f9199ea82 ("netfilter: conntrack: add gc worker to remove timed-out entries") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-23netfilter: nft_last: avoid possible false sharingPablo Neira Ayuso
Use the idiom described in: https://github.com/google/ktsan/wiki/READ_ONCE-and-WRITE_ONCE#it-may-improve-performance Moreover, prevent a compiler optimization. Fixes: 836382dc2471 ("netfilter: nf_tables: add last expression") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-23netfilter: flowtable: avoid possible false sharingPablo Neira Ayuso
The flowtable follows the same timeout approach as conntrack, use the same idiom as in cc16921351d8 ("netfilter: conntrack: avoid same-timeout update") but also include the fix provided by e37542ba111f ("netfilter: conntrack: avoid possible false sharing"). Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-07-23ext4: remove conflicting comment from __ext4_forgetGuoqing Jiang
We do a bforget and return for no journal case, so let's remove this conflict comment. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Guoqing Jiang <jiangguoqing@kylinos.cn> Link: https://lore.kernel.org/r/20210714055940.1553705-1-guoqing.jiang@linux.dev Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-07-23ext4: fix potential uninitialized access to retval in kmmpdYe Bin
if (!ext4_has_feature_mmp(sb)) then retval can be unitialized before we jump to the wait_to_exit label. Fixes: 61bb4a1c417e ("ext4: fix possible UAF when remounting r/o a mmp-protected file system") Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20210713022728.2533770-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-07-23arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllersVladimir Oltean
Since drivers/mmc/host/sdhci-xenon.c declares the PROBE_PREFER_ASYNCHRONOUS probe type, it is not guaranteed whether /dev/mmcblk0 will belong to sdhci0 or sdhci1. In turn, this will break booting by: root=/dev/mmcblk0p1 Fix the issue by adding aliases so that the old MMC controller indices are preserved. Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-07-23cfg80211: Fix possible memory leak in function cfg80211_bss_updateNguyen Dinh Phi
When we exceed the limit of BSS entries, this function will free the new entry, however, at this time, it is the last door to access the inputed ies, so these ies will be unreferenced objects and cause memory leak. Therefore we should free its ies before deallocating the new entry, beside of dropping it from hidden_list. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Link: https://lore.kernel.org/r/20210628132334.851095-1-phind.uet@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-07-23nl80211: limit band information in non-split dataJohannes Berg
In non-split data, we shouldn't be adding S1G and 6 GHz data (or future bands) since we're really close to the 4k message size limit. Remove those bands, any modern userspace that can use S1G or 6 GHz should already be using split dumps, and if not then it needs to update. Link: https://lore.kernel.org/r/20210712215329.31444162a2c2.I5555312e4a074c84f8b4e7ad79dc4d1fbfc5126c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-07-23virt_wifi: fix error on connectMatteo Croce
When connecting without first doing a scan, the BSS list is empty and __cfg80211_connect_result() generates this warning: $ iw dev wlan0 connect -w VirtWifi [ 15.371989] ------------[ cut here ]------------ [ 15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440 [ 15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444 [ 15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014 [ 15.372597] Workqueue: cfg80211 cfg80211_event_work [ 15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440 [ 15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd [ 15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246 [ 15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472 [ 15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba [ 15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8 [ 15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98 [ 15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100 [ 15.373330] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 15.373382] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0 [ 15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 15.373580] Call Trace: [ 15.373611] ? cfg80211_process_wdev_events+0x10e/0x170 [ 15.373743] cfg80211_process_wdev_events+0x10e/0x170 [ 15.373783] cfg80211_process_rdev_events+0x21/0x40 [ 15.373846] cfg80211_event_work+0x20/0x30 [ 15.373892] process_one_work+0x1e9/0x340 [ 15.373956] worker_thread+0x4b/0x3f0 [ 15.374017] ? process_one_work+0x340/0x340 [ 15.374053] kthread+0x11f/0x140 [ 15.374089] ? set_kthread_struct+0x30/0x30 [ 15.374153] ret_from_fork+0x1f/0x30 [ 15.374187] ---[ end trace 321ef0cb7e9c0be1 ]--- wlan0 (phy #0): connected to 00:00:00:00:00:00 Add the fake bss just before the connect so that cfg80211_get_bss() finds the virtual network. As some code was duplicated, move it in a common function. Signed-off-by: Matteo Croce <mcroce@microsoft.com> Link: https://lore.kernel.org/r/20210706154423.11065-1-mcroce@linux.microsoft.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-07-23mac80211: fix enabling 4-address mode on a sta vif after assocFelix Fietkau
Notify the driver about the 4-address mode change and also send a nulldata packet to the AP to notify it about the change Fixes: 1ff4e8f2dec8 ("mac80211: notify the driver when a sta uses 4-address mode") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210702050111.47546-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-07-23mac80211: fix starting aggregation sessions on mesh interfacesFelix Fietkau
The logic for starting aggregation sessions was recently moved from minstrel_ht to mac80211, into the subif tx handler just after the sta lookup. Unfortunately this didn't work for mesh interfaces, since the sta lookup is deferred until a much later point in time on those. Fix this by also calling the aggregation check right after the deferred sta lookup. Fixes: 08a46c642001 ("mac80211: move A-MPDU session check from minstrel_ht to mac80211") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210629112853.29785-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-07-23mac80211: Do not strip skb headroom on monitor framesJohan Almbladh
When a monitor interface is present together with other interfaces, a received skb is copied and received on the monitor netdev. Before, the copied skb was allocated with exactly the amount of space needed for the radiotap header, resulting in an skb without any headroom at all being received on the monitor netdev. With the introduction of eBPF and XDP in the kernel, skbs may be processed by custom eBPF programs. However, since the skb cannot be reallocated in the eBPF program, no more data or headers can be pushed. The old code made sure the final headroom was zero regardless of the value of NET_SKB_PAD, so increasing that constant would have no effect. Now we allocate monitor skb copies with a headroom of NET_SKB_PAD bytes before the radiotap header. Monitor interfaces now behave in the same way as other netdev interfaces that honor the NET_SKB_PAD constant. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Link: https://lore.kernel.org/r/20210628123713.2070753-1-johan.almbladh@anyfinetworks.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-07-23ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pinsMarek Vasut
The pinctrl_power_button/pinctrl_power_out each define single GPIO pinmux, except it is exactly the other one than the matching gpio-keys and gpio-poweroff DT nodes use for that functionality. Swap the two GPIOs to correct this error. Fixes: 50d29fdb765d ("ARM: dts: imx53: Add power GPIOs on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_initColin Ian King
The function imx_mmdc_perf_init recently had a 3rd argument added to it but the equivalent macro was not updated and is still the older 2 argument version. Fix this by adding in the missing 3rd argumement mmdc_ipg_clk. Fixes: f07ec8536580 ("ARM: imx: add missing clk_disable_unprepare()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM stateNicholas Piggin
The H_ENTER_NESTED hypercall is handled by the L0, and it is a request by the L1 to switch the context of the vCPU over to that of its L2 guest, and return with an interrupt indication. The L1 is responsible for switching some registers to guest context, and the L0 switches others (including all the hypervisor privileged state). If the L2 MSR has TM active, then the L1 is responsible for recheckpointing the L2 TM state. Then the L1 exits to L0 via the H_ENTER_NESTED hcall, and the L0 saves the TM state as part of the exit, and then it recheckpoints the TM state as part of the nested entry and finally HRFIDs into the L2 with TM active MSR. Not efficient, but about the simplest approach for something that's horrendously complicated. Problems arise if the L1 exits to the L0 with a TM state which does not match the L2 TM state being requested. For example if the L1 is transactional but the L2 MSR is non-transactional, or vice versa. The L0's HRFID can take a TM Bad Thing interrupt and crash. Fix this by disallowing H_ENTER_NESTED in TM[T] state entirely, and then ensuring that if the L1 is suspended then the L2 must have TM active, and if the L1 is not suspended then the L2 must not have TM active. Fixes: 360cae313702 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall") Cc: stable@vger.kernel.org # v4.20+ Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2021-07-23KVM: PPC: Book3S: Fix H_RTAS rets buffer overflowNicholas Piggin
The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on the rtas_args.nargs that was provided by the guest. That guest nargs value is not range checked, so the guest can cause the host rets pointer to be pointed outside the args array. The individual rtas function handlers check the nargs and nrets values to ensure they are correct, but if they are not, the handlers store a -3 (0xfffffffd) failure indication in rets[0] which corrupts host memory. Fix this by testing up front whether the guest supplied nargs and nret would exceed the array size, and fail the hcall directly without storing a failure indication to rets[0]. Also expand on a comment about why we kill the guest and try not to return errors directly if we have a valid rets[0] pointer. Fixes: 8e591cb72047 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls") Cc: stable@vger.kernel.org # v3.10+ Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2021-07-23pcmcia: i82092: fix a null pointer dereference bugZheyu Ma
During the driver loading process, the 'dev' field was not assigned, but the 'dev' field was referenced in the subsequent 'i82092aa_set_mem_map' function. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> CC: <stable@vger.kernel.org> [linux@dominikbrodowski.net: shorten commit message, add Cc to stable] Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2021-07-22riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUEAlexandre Ghiti
The check that is done in setup_bootmem currently only works for 32-bit kernel since the kernel mapping has been moved outside of the linear mapping for 64-bit kernel. So make sure that for 64-bit kernel, the kernel mapping does not overlap with the last 4K of the addressable memory. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-22riscv: Make sure the linear mapping does not use the kernel mappingAlexandre Ghiti
For 64-bit kernel, the end of the address space is occupied by the kernel mapping and currently, the functions to populate the kernel page tables (i.e. create_p*d_mapping) do not override existing mapping so we must make sure the linear mapping does not map memory in the kernel mapping by clipping the memory above the memory limit. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Fixes: c9811e379b21 ("riscv: Add mem kernel parameter support") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-22Merge tag 'drm-fixes-2021-07-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular fixes - a bunch of amdgpu fixes are the main thing mostly for the new gpus. There is also some i915 reverts for older changes that were having some unwanted side effects. One nouveau fix for a report regressions, and otherwise just some misc fixes. core: - fix for non-drm ioctls on drm fd panel: - avoid double free ttm: - refcounting fix - NULL checks amdgpu: - Yellow Carp updates - Add some Yellow Carp DIDs - Beige Goby updates - CIK 10bit 4K regression fix - GFX10 golden settings updates - eDP panel regression fix - Misc display fixes - Aldebaran fix - fix COW checks nouveau: - init BO GEM fields i915: - revert async command parsing - revert fence error propogation - GVT fix for shadow ppgtt vc4: - fix interrupt handling" * tag 'drm-fixes-2021-07-23' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/panel: raspberrypi-touchscreen: Prevent double-free drm/amdgpu - Corrected the video codecs array name for yellow carp drm/amd/display: Fix ASSR regression on embedded panels drm/amdgpu: add yellow carp pci id (v2) drm/amdgpu: update yellow carp external rev_id handling drm/amd/pm: Support board calibration on aldebaran drm/amd/display: change zstate allow msg condition drm/amd/display: Populate dtbclk entries for dcn3.02/3.03 drm/amd/display: Line Buffer changes drm/amd/display: Remove MALL function from DCN3.1 drm/amd/display: Only set default brightness for OLED drm/amd/display: Update bounding box for DCN3.1 drm/amd/display: Query VCO frequency from register for DCN3.1 drm/amd/display: Populate socclk entries for dcn3.02/3.03 drm/amd/display: Fix max vstartup calculation for modes with borders drm/amd/display: implement workaround for riommu related hang drm/amd/display: Fix comparison error in dcn21 DML drm/i915: Correct the docs for intel_engine_cmd_parser drm/ttm: add missing NULL checks drm/ttm: Force re-init if ttm_global_init() fails ...
2021-07-22riscv: Fix memory_limit for 64-bit kernelAlexandre Ghiti
As described in Documentation/riscv/vm-layout.rst, the end of the virtual address space for 64-bit kernel is occupied by the modules/BPF/ kernel mappings so this actually reduces the amount of memory we are able to map and then use in the linear mapping. So make sure this limit is correctly set. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-23ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHzOleksandr Suvorov
NXP and AzureWave don't recommend using SDIO bus mode 3.3V@50MHz due to noise affecting the wireless throughput. Colibri iMX6ULL uses only 3.3V signaling for Wi-Fi module AW-CM276NF. Limit the SDIO Clock on Colibri iMX6ULL to 25MHz. Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23arm64: dts: ls1028: sl28: fix networking for variant 2Michael Walle
The PHY configuration for the variant 2 is still missing the flag for in-band signalling between PHY and MAC. Both sides - MAC and PHY - have to match the setting. For now, Linux only supports setting the MAC side and thus it has to match the setting the bootloader is configuring. Enable in-band signalling to make ethernet work. Fixes: ab43f0307449 ("arm64: dts: ls1028a: sl28: add support for variant 2") Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-22cifs: fix fallocate when trying to allocate a hole.Ronnie Sahlberg
Remove the conditional checking for out_data_len and skipping the fallocate if it is 0. This is wrong will actually change any legitimate the fallocate where the entire region is unallocated into a no-op. Additionally, before allocating the range, if FALLOC_FL_KEEP_SIZE is set then we need to clamp the length of the fallocate region as to not extend the size of the file. Fixes: 966a3cb7c7db ("cifs: improve fallocate emulation") Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-07-22Merge tag 'fallthrough-fixes-clang-5.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fix from Gustavo Silva: "Fix a fall-through warning when building with -Wimplicit-fallthrough on PowerPC" * tag 'fallthrough-fixes-clang-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: powerpc/pasemi: Fix fall-through warning for Clang
2021-07-23Merge tag 'drm-misc-fixes-2021-07-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * Return -ENOTTY for non-DRM ioctls * amdgpu: Fix COW checks * nouveau: init BO GME fields * panel: Avoid double free * ttm: Fix refcounting in ttm_global_init(); NULL checks * vc4: Fix interrupt handling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YPlbkmH6S4VAHP9j@linux-uq9g.fritz.box
2021-07-23Merge tag 'drm-intel-fixes-2021-07-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Couple reverts from Jason getting rid of asynchronous command parsing and fence error propagation and a GVT fix of shadow ppgtt invalidation with proper D3 state tracking from Colin. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YPl1sIyruD0U5Orl@intel.com
2021-07-22io_uring: fix early fdput() of fileJens Axboe
A previous commit shuffled some code around, and inadvertently used struct file after fdput() had been called on it. As we can't touch the file post fdput() dropping our reference, move the fdput() to after that has been done. Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/io-uring/YPnqM0fY3nM5RdRI@zeniv-ca.linux.org.uk/ Fixes: f2a48dd09b8e ("io_uring: refactor io_sq_offload_create()") Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-22Merge tag 'array-bounds-fixes-5.14-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull array bounds warning fix from Gustavo Silva: "Fix a couple of out-of-bounds warnings in the media subsystem. This is part of the ongoing efforts to globally enable -Warray-bounds" * tag 'array-bounds-fixes-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()
2021-07-22Merge tag 'nvme-5.14-2021-07-22' of git://git.infradead.org/nvme into block-5.14Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.14: - tracing fix (Keith Busch) - fix multipath head refcounting (Hannes Reinecke) - Write Zeroes vs PI fix (me) - drop a bogus WARN_ON (Zhihao Cheng)" * tag 'nvme-5.14-2021-07-22' of git://git.infradead.org/nvme: nvme: set the PRACT bit when using Write Zeroes with T10 PI nvme: fix nvme_setup_command metadata trace event nvme: fix refcounting imbalance when all paths are down nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING
2021-07-22CIFS: Clarify SMB1 code for POSIX delete fileSteve French
Coverity also complains about the way we calculate the offset (starting from the address of a 4 byte array within the header structure rather than from the beginning of the struct plus 4 bytes) for SMB1 CIFSPOSIXDelFile. This changeset doesn't change the address but makes it slightly clearer. Addresses-Coverity: 711519 ("Out of bounds write") Signed-off-by: Steve French <stfrench@microsoft.com>
2021-07-22Merge tag 'usb-serial-5.14-rc3' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.14-rc3 Here are some new device ids and a device-id comment fix. All have been in linux-next with no reported issues. * tag 'usb-serial-5.14-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick USB: serial: cp210x: fix comments for GE CS1000 USB: serial: option: add support for u-blox LARA-R6 family
2021-07-22CIFS: Clarify SMB1 code for POSIX CreateSteve French
Coverity also complains about the way we calculate the offset (starting from the address of a 4 byte array within the header structure rather than from the beginning of the struct plus 4 bytes) for SMB1 CIFSPOSIXCreate. This changeset doesn't change the address but makes it slightly clearer. Addresses-Coverity: 711518 ("Out of bounds write") Signed-off-by: Steve French <stfrench@microsoft.com>
2021-07-22Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "A pair of arm64 fixes for -rc3. The straightforward one is a fix to our firmware calling stub, which accidentally started corrupting the link register on machines with SVE. Since these machines don't really exist yet, it wasn't spotted in -next. The other fix is a revert-and-a-bit of a patch originally intended to allow PTE-level huge mappings for the VMAP area on 32-bit PPC 8xx. A side-effect of this change was that our pXd_set_huge() implementations could be replaced with generic dummy functions depending on the levels of page-table being used, which in turn broke the boot if we fail to create the linear mapping as a result of using these functions to operate on the pgd. Huge thanks to Michael Ellerman for modifying the revert so as not to regress PPC 8xx in terms of functionality. Anyway, that's the background and it's also available in the commit message along with Link tags pointing at all of the fun. Summary: - Fix hang when issuing SMC on SVE-capable system due to clobbered LR - Fix boot failure due to missing block mappings with folded page-table" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: Revert "mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge" arm64: smccc: Save lr before calling __arm_smccc_sve_check()
2021-07-22Merge tag 'hyperv-fixes-signed-20210722' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - bug fix from Haiyang for vmbus CPU assignment - revert of a bogus patch that went into 5.14-rc1 * tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Revert "x86/hyperv: fix logical processor creation" Drivers: hv: vmbus: Fix duplicate CPU assignments within a device
generated by cgit (git 2.34.1) at 2025-09-12 21:29:31 +0000