summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-10scsi: ufs: bsg: Set bsg_queue to NULL after removalGuixin Liu
Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access. Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Link: https://lore.kernel.org/r/20241218014214.64533-3-kanie@linux.alibaba.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: ufs: bsg: Delete bsg_dev when setting up bsg failsGuixin Liu
We should remove the bsg device when bsg_setup_queue() fails to release the resources. Fixes: df032bf27a41 ("scsi: ufs: Add a bsg endpoint that supports UPIUs") Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Link: https://lore.kernel.org/r/20241218014214.64533-2-kanie@linux.alibaba.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: st: Don't set pos_unknown just after device recognitionKai Mäkisara
Commit 9604eea5bd3a ("scsi: st: Add third party poweron reset handling") in v6.6 added new code to handle the Power On/Reset Unit Attention (POR UA) sense data. This was in addition to the existing method. When this Unit Attention is received, the driver blocks attempts to read, write and some other operations because the reset may have rewinded the tape. Because of the added code, also the initial POR UA resulted in blocking operations, including those that are used to set the driver options after the device is recognized. Also, reading and writing are refused, whereas they succeeded before this commit. Add code to not set pos_unknown to block operations if the POR UA is received from the first test_ready() call after the st device has been created. This restores the behavior before v6.6. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20241216113755.30415-1-Kai.Makisara@kolumbus.fi Fixes: 9604eea5bd3a ("scsi: st: Add third party poweron reset handling") CC: stable@vger.kernel.org Closes: https://lore.kernel.org/linux-scsi/2201CF73-4795-4D3B-9A79-6EE5215CF58D@kolumbus.fi/ Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: aic7xxx: Fix build 'aicasm' warningwangdicheng
When building with CONFIG_AIC7XXX_BUILD_FIRMWARE=y or CONFIG_AIC79XX_BUILD_FIRMWARE=y, the warning messages are as follows: aicasm_gram.tab.c:1722:16: warning: implicit declaration of function ‘yylex’ [-Wimplicit-function-declaration] aicasm_macro_gram.c:68:25: warning: implicit declaration of function ‘mmlex’ [-Wimplicit-function-declaration] aicasm_scan.l:417:6: warning: implicit declaration of function ‘mm_switch_to_buffer’ aicasm_scan.l:418:6: warning: implicit declaration of function ‘mmparse’ aicasm_scan.l:421:6: warning: implicit declaration of function ‘mm_delete_buffer’ The solution is to add the corresponding function declaration to the corresponding file. Signed-off-by: wangdicheng <wangdicheng@kylinos.cn> Signed-off-by: huanglei <huanglei@kylinos.cn> Link: https://lore.kernel.org/r/20241206071926.63832-1-wangdich9700@163.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: Revert "scsi: ufs: core: Probe for EXT_IID support"Avri Altman
This reverts commit 6e1d850acff9477ae4c18a73c19ef52841ac2010. Although added a while ago, to date no one make use of ext_iid, specifically incorporates it in the upiu header. Therefore, remove it as it is currently unused and not serving any purpose. Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20250103080204.63951-1-avri.altman@wdc.com Cc: Can Guo <quic_cang@quicinc.com> Cc: Asutosh Das <quic_asutoshd@quicinc.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: storvsc: Ratelimit warning logs to prevent VM denial of serviceEaswar Hariharan
If there's a persistent error in the hypervisor, the SCSI warning for failed I/O can flood the kernel log and max out CPU utilization, preventing troubleshooting from the VM side. Ratelimit the warning so it doesn't DoS the VM. Closes: https://github.com/microsoft/WSL/issues/9173 Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Link: https://lore.kernel.org/r/20250107-eahariha-ratelimit-storvsc-v1-1-7fc193d1f2b0@linux.microsoft.com Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_debug: Constify sdebug_driver_templateJohn Garry
It's better to have sdebug_driver_template as const, so update the probe path to set the shost members directly after allocation and make that change. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20250107153325.1689432-1-john.g.garry@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10Merge branch '6.13/scsi-fixes' into 6.14/scsi-stagingMartin K. Petersen
Pull in fixes branch to resolve merge conflict in ufs-qcom.c. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: documentation: Corrections for struct updatesRandy Dunlap
Update scsi_mid_low_api.rst for changes to struct scsi_host and struct scsi_cmnd. struct scsi_host: - no_async_abort is gone - drop sh_list w/ no replacement - change my_devices to __devices struct scsi_cmnd: - removed 'done' (now in struct scsi_driver); use scsi_done() or scsi_done_direct() callbacks - change previous request_bufflen to scsi_bufflen() - change previous use_sg field to scsi_dma_map() or scsi_sg_count() - change previous request_buffer field to reference to 'usg_sg' text [mkp: removed more obsolete stuff] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241221212539.1314560-1-rdunlap@infradead.org Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: driver-api: documentation: Change what is added to docbookRandy Dunlap
For scsi_devinfo.c, use :export: so that exported symbols are put into the docbook. Drop :internal: -- they aren't needed in the docbook. For scsi_proc.c, drop :internal:. This will cause all documented private (as is already done) and exported symbols to be added to the docbook. For scsi_scan.c, switch from :internal: to :export: so that exported symbols are put into the generated docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241218000748.932850-1-rdunlap@infradead.org Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: transport: sas: spi: Fix kernel-doc for exported functionsRandy Dunlap
Fix kernel-doc for sas_port_alloc(), sas_port_alloc_num(), and spi_dv_device(). This allows them to be part of the SCSI driver-api docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-6-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_scan: Add kernel-doc for exported functionRandy Dunlap
Add kernel-doc for scsi_add_device() since it is exported. This allows it to be part of the SCSI driver-api docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-5-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_lib: Add kernel-doc for exported functionsRandy Dunlap
Add kernel-doc for scsi_failures_reset_retries() and scsi_alloc_request() since these are exported. This allows them to be part of the SCSI driver-api docbook. Fix kernel-doc comments for scsi_vpd_tpg_id() [add kernel-doc for one parameter and fix a typo]. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-4-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_ioctl: Add kernel-doc for exported functionsRandy Dunlap
Add kernel-doc for scsi_set_medium_removal(), scsi_cmd_allowed(), and scsi_ioctl_block_when_processing_errors() since these are exported. This allows them to be part of the SCSI driver-api docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-3-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-10scsi: scsi_error: Add kernel-doc for exported functionsRandy Dunlap
Convert scsi_report_bus_reset() and scsi_report_device_reset() to kernel-doc since they are exported. This allows them to be part of the driver-api/scsi.rst docbook. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20241212205217.597844-2-rdunlap@infradead.org CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> CC: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: scsi_debug: Skip host/bus reset settle delayBart Van Assche
Skip the reset settle delay during error handling since the scsi_debug driver doesn't need this delay. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241216184852.2626339-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02Merge patch series "scsi: Constify 'struct bin_attribute'"Martin K. Petersen
Thomas Weißschuh <linux@weissschuh.net> says: The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-0-f0a5e54b3437@weissschuh.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: qla4xxx: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-11-f0a5e54b3437@weissschuh.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: qla2xxx: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-10-f0a5e54b3437@weissschuh.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: qedi: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-9-f0a5e54b3437@weissschuh.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: qedf: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-8-f0a5e54b3437@weissschuh.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: ipr: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-7-f0a5e54b3437@weissschuh.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: lpfc: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-6-f0a5e54b3437@weissschuh.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: ibmvfc: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-5-f0a5e54b3437@weissschuh.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: esas2r: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-4-f0a5e54b3437@weissschuh.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: arcmsr: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-3-f0a5e54b3437@weissschuh.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: 3w-sas: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-2-f0a5e54b3437@weissschuh.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: core: Constify 'struct bin_attribute'Thomas Weißschuh
The sysfs core now allows instances of 'struct bin_attribute' to be moved into read-only memory. Make use of that to protect them against accidental or malicious modifications. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20241216-sysfs-const-bin_attr-scsi-v1-1-f0a5e54b3437@weissschuh.net Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02Merge patch series "Update lpfc to revision 14.4.0.7"Martin K. Petersen
Justin Tee <justintee8345@gmail.com> says: Update lpfc to revision 14.4.0.7 This patch set contains fixes related to smatch, clean up of obsolete code and global spinlocks, changes to ADISC and LS_RJT handling, and support for large fw object reads used in proprietary applications. The patches were cut against Martin's 6.14/scsi-queue tree. Link: https://lore.kernel.org/r/20241212233309.71356-1-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: lpfc: Copyright updates for 14.4.0.7 patchesJustin Tee
Update copyrights to 2024 for files modified in the 14.4.0.7 patch set. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20241212233309.71356-11-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: lpfc: Update lpfc version to 14.4.0.7Justin Tee
Update lpfc version to 14.4.0.7 Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20241212233309.71356-10-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: lpfc: Add support for large fw object application layer readsJustin Tee
Current lpfc bsg implementation allows a maximum fw read object size of 30KB. Implementation and support for read object mailbox commands for fw objects larger than 30KB are now required for proprietary applications. Thus, update the lpfc_sli_config_emb0_subsys structure and its associated submission and completion paths to accommodate for an alternative form of read object command that supports large fw objects. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20241212233309.71356-9-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: lpfc: Update definition of firmware configuration mbox cmdsJustin Tee
There are unused fields in mailbox commands that query for firmware configuration information. As such, update the struct definitions by correcting the name of certain fields and removing the unused fields. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20241212233309.71356-8-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: lpfc: Change lpfc_nodelist save_flags member into a bitmaskJustin Tee
In attempt to reduce the amount of unnecessary ndlp->lock acquisitions in the lpfc driver, change save_flags into an unsigned long bitmask and use clear_bit/test_bit bitwise atomic APIs instead of reliance on ndlp->lock for synchronization. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20241212233309.71356-7-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: lpfc: Add handling for LS_RJT reason explanation authentication requiredJustin Tee
When a LS_RJT is received with reason explanation authentication required, current driver logic is to retry the PLOGI up to 48 times. In the worse case scenario, 48 retries can take longer than dev_loss_tmo and if there is an RSCN received indicating an authentication requirement change, the driver may miss processing it. Fix by adding logic to specifically handle reason explanation authentication required and set the max retry count to 8 times. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20241212233309.71356-6-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: lpfc: Modify handling of ADISC based on ndlp state and RPI registrationJustin Tee
In lpfc_check_adisc, remove the requirement that the ndlp object must have been RPI registered. Whether or not the ndlp is RPI registered is unrelated to verifying that the received ADISC is intended for that ndlp rport object. After ADISC receipt, there's no need to put the ndlp state into NPR. Let the cmpl routines from the actions taken earlier in ADISC handling set the proper ndlp state. Also, refactor when a RESUME_RPI mailbox command should be sent. It should only be sent if the RPI registered flag is set. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20241212233309.71356-5-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: lpfc: Delete NLP_TARGET_REMOVE flag due to obsolete usageJustin Tee
Remove the NLP_TARGET_REMOVE flag as its usage is obsolete. The current framework is to rely on the lpfc_dev_loss_tmo_callbk from upper layer to notify final ndlp kref release. There's no need to specifically set NLP_EVT_DEVICE_RM when a LOGO completes. The dev_loss_tmo_callbk is responsible for the final kref put. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20241212233309.71356-4-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: lpfc: Restrict the REG_FCFI MAM field to FCoE adapters onlyJustin Tee
Qualify setting the REG_FCFI MAM field to FCoE adapters only by keying off HBA_FCOE_MODE phba->hba_flag. The field is not applicable to FC adapters. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20241212233309.71356-3-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: lpfc: Redefine incorrect type in lpfc_create_device_data()Justin Tee
Fix smatch warning by redefining local variable memory_flags from int to gfp_t. lpfc_scsi.c: warning: incorrect type in argument 2 (different base types) lpfc_scsi.c: expected restricted gfp_t [usertype] gfp_mask lpfc_scsi.c: got int memory_flags Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20241212233309.71356-2-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: myrb: Remove dead codeAriel Otilibili
* reported by Coverity ID 1602240 * ldev_info is always true, therefore the branch statement is never called. Fixes: 081ff398c56c ("scsi: myrb: Add Mylex RAID controller (block interface)") Cc: Hannes Reinecke <hare@kernel.org> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr> Link: https://lore.kernel.org/r/20241213225852.62741-2-ariel.otilibili-anieli@eurecom.fr Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: mpt3sas: Set ioc->manu_pg11.EEDPTagMode directly to 1Paul Menzel
Currently, the code does: if (x == 0) { x &= ~0x3; x |= 0x1; } Zeroing bits 0 and 1 of a variable that is 0 is not necessary. So directly set the variable to 1. Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/r/20241212221817.78940-2-pmenzel@molgen.mpg.de Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: mpt3sas: Add details to EEDPTagMode error messagePaul Menzel
Linux 5.15 logs the error below mpt3sas_cm0: overriding NVDATA EEDPTagMode setting on a Dell PowerEdge T440 with the card below. 5e:00.0 Serial Attached SCSI controller [0107]: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 [1000:0097] (rev 02) It’s not clear to a user what this error is about. As a first step to improve this, add the values to the error message. Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/r/20241212221817.78940-1-pmenzel@molgen.mpg.de Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: esp: Fix variable typoSiddharth Menon
Renamed ESP_CONGIG4_TEST to ESP_CONFIG4_TEST Signed-off-by: Siddharth Menon <simeddon@gmail.com> Link: https://lore.kernel.org/r/20241210040202.11112-1-simeddon@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: ufs: crypto: Remove ufs_hba_variant_ops::program_keyEric Biggers
There are no longer any implementations of ufs_hba_variant_ops::program_key, so remove it. As a result, ufshcd_program_key() no longer can return an error, so also clean it up to return void. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20241213041958.202565-5-ebiggers@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: ufs: qcom: Convert to use UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILEEric Biggers
By default the UFS core is responsible for initializing the blk_crypto_profile, but Qualcomm platforms have their own way of programming and evicting crypto keys. So currently ufs_hba_variant_ops::program_key is used to redirect control flow from ufshcd_program_key(). This has worked until now, but it's a bit of a hack, given that the key (and algorithm ID etc.) ends up being converted from blk_crypto_key => ufs_crypto_cfg_entry => SCM call parameters, where the intermediate ufs_crypto_cfg_entry step is unnecessary. Taking a similar approach with the upcoming wrapped key support, the implementation of which is similarly platform-specific, would require adding four new methods to ufs_hba_variant_ops, changing program_key to take the struct blk_crypto_key, and adding a new UFSHCD_CAP_* flag to indicate support for wrapped keys. This patch takes a different approach. It changes ufs-qcom to use the existing UFSHCD_QUIRK_CUSTOM_CRYPTO_PROFILE which was recently added for ufs-exynos. This allows it to override the full blk_crypto_profile, eliminating the need for the existing ufs_hba_variant_ops::program_key and the hooks that would have been needed for wrapped key support. It does require a bit of duplicated code to read the crypto capability registers, but it's worth the simplification in design with ufs-qcom and ufs-exynos now using the same method to customize the crypto profile, and it makes it much easier to add wrapped key support. Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sm8650 Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20241213041958.202565-4-ebiggers@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: ufs: crypto: Add ufs_hba_from_crypto_profile()Eric Biggers
Add a helper function that encapsulates a container_of expression. For now there are two users but soon there will be more. Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sm8650 Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20241213041958.202565-3-ebiggers@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: ufs: qcom: Fix crypto key evictionEric Biggers
Commit 56541c7c4468 ("scsi: ufs: ufs-qcom: Switch to the new ICE API") introduced an incorrect check of the algorithm ID into the key eviction path, and thus qcom_ice_evict_key() is no longer ever called. Fix it. Fixes: 56541c7c4468 ("scsi: ufs: ufs-qcom: Switch to the new ICE API") Cc: stable@vger.kernel.org Cc: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20241210030839.1118805-1-ebiggers@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: isci: Remove unused isci_remote_device_reset_complete()Dr. David Alan Gilbert
isci_remote_device_reset_complete() last use was removed in 2012 by commit 14aaa9f0a318 ("isci: Redesign device suspension, abort, cleanup.") Remove it. It was the last user of sci_remote_device_reset_complete(). Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20241223180218.50426-1-linux@treblig.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: iscsi: Remove unused iscsi_create_session()Dr. David Alan Gilbert
iscsi_create_session() last use was removed in 2008 by commit 756135215ec7 ("[SCSI] iscsi: remove session and host binding in libiscsi") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20241223180110.50266-1-linux@treblig.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: target: Remove unused functionsDr. David Alan Gilbert
The functions: iscsit_check_unsolicited_dataout() iscsit_fail_session() iscsit_create_conn_recovery_datain_values() iscsit_create_conn_recovery_dataout_values() iscsit_tpg_dump_params() iscsit_print_session_params() were all added in 2011 by commit e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") but have remained unused. Remove them. Having deleted them, the functions: iscsi_print_params() iscsi_dump_conn_ops() iscsi_dump_sess_ops() are also unused. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20241222213524.270735-1-linux@treblig.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-10 17:23:01 +0000