summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-04cifs: Fix flushing, invalidation and file size with FICLONEDavid Howells
Fix a number of issues in the cifs filesystem implementation of the FICLONE ioctl in cifs_remap_file_range(). This is analogous to the previously fixed bug in cifs_file_copychunk_range() and can share the helper functions. Firstly, the invalidation of the destination range is handled incorrectly: We shouldn't just invalidate the whole file as dirty data in the file may get lost and we can't just call truncate_inode_pages_range() to invalidate the destination range as that will erase parts of a partial folio at each end whilst invalidating and discarding all the folios in the middle. We need to force all the folios covering the range to be reloaded, but we mustn't lose dirty data in them that's not in the destination range. Further, we shouldn't simply round out the range to PAGE_SIZE at each end as cifs should move to support multipage folios. Secondly, there's an issue whereby a write may have extended the file locally, but not have been written back yet. This can leaves the local idea of the EOF at a later point than the server's EOF. If a clone request is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE (which gets translated to -EIO locally) if the clone source extends past the server's EOF. Fix this by: (0) Flush the source region (already done). The flush does nothing and the EOF isn't moved if the source region has no dirty data. (1) Move the EOF to the end of the source region if it isn't already at least at this point. If we can't do this, for instance if the server doesn't support it, just flush the entire source file. (2) Find the folio (if present) at each end of the range, flushing it and increasing the region-to-be-invalidated to cover those in their entirety. (3) Fully discard all the folios covering the range as we want them to be reloaded. (4) Then perform the extent duplication. Thirdly, set i_size after doing the duplicate_extents operation as this value may be used by various things internally. stat() hides the issue because setting ->time to 0 causes cifs_getatr() to revalidate the attributes. These were causing the cifs/001 xfstest to fail. Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer") Signed-off-by: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org cc: Christoph Hellwig <hch@lst.de> cc: Paulo Alcantara <pc@manguebit.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Matthew Wilcox <willy@infradead.org> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-04cifs: Fix flushing, invalidation and file size with copy_file_range()David Howells
Fix a number of issues in the cifs filesystem implementation of the copy_file_range() syscall in cifs_file_copychunk_range(). Firstly, the invalidation of the destination range is handled incorrectly: We shouldn't just invalidate the whole file as dirty data in the file may get lost and we can't just call truncate_inode_pages_range() to invalidate the destination range as that will erase parts of a partial folio at each end whilst invalidating and discarding all the folios in the middle. We need to force all the folios covering the range to be reloaded, but we mustn't lose dirty data in them that's not in the destination range. Further, we shouldn't simply round out the range to PAGE_SIZE at each end as cifs should move to support multipage folios. Secondly, there's an issue whereby a write may have extended the file locally, but not have been written back yet. This can leaves the local idea of the EOF at a later point than the server's EOF. If a copy request is issued, this will fail on the server with STATUS_INVALID_VIEW_SIZE (which gets translated to -EIO locally) if the copy source extends past the server's EOF. Fix this by: (0) Flush the source region (already done). The flush does nothing and the EOF isn't moved if the source region has no dirty data. (1) Move the EOF to the end of the source region if it isn't already at least at this point. If we can't do this, for instance if the server doesn't support it, just flush the entire source file. (2) Find the folio (if present) at each end of the range, flushing it and increasing the region-to-be-invalidated to cover those in their entirety. (3) Fully discard all the folios covering the range as we want them to be reloaded. (4) Then perform the copy. Thirdly, set i_size after doing the copychunk_range operation as this value may be used by various things internally. stat() hides the issue because setting ->time to 0 causes cifs_getatr() to revalidate the attributes. These were causing the generic/075 xfstest to fail. Fixes: 620d8745b35d ("Introduce cifs_copy_file_range()") Cc: stable@vger.kernel.org Signed-off-by: David Howells <dhowells@redhat.com> cc: Paulo Alcantara <pc@manguebit.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Matthew Wilcox <willy@infradead.org> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-mm@kvack.org Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-04arm64: dts: rockchip: drop interrupt-names property from rk3588s dfiHeiko Stuebner
The dfi binding does not specify interrupt names, with the interrupts just specifying channels 0-x. So drop the unspecified property. Fixes: 5a6976b1040a ("arm64: dts: rockchip: Add DFI to rk3588s") Reported-by: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Link: https://lore.kernel.org/r/20231201134859.322491-1-heiko@sntech.de
2023-12-04Merge patch series "riscv: Fix issues with module loading"Palmer Dabbelt
Charlie Jenkins <charlie@rivosinc.com> says: Module loading did not account for multiple threads concurrently loading modules. This patch fixes that issue. There is also a small patch to fix the type of a __le16 variable. * b4-shazam-merge: riscv: Correct type casting in module loading riscv: Safely remove entries from relocation list Link: https://lore.kernel.org/r/20231127-module_linking_freeing-v4-0-a2ca1d7027d0@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-12-04riscv: Correct type casting in module loadingCharlie Jenkins
Use __le16 with le16_to_cpu. Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations") Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231127-module_linking_freeing-v4-2-a2ca1d7027d0@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-12-04riscv: Safely remove entries from relocation listCharlie Jenkins
Use the safe versions of list and hlist iteration to safely remove entries from the module relocation lists. To allow mutliple threads to load modules concurrently, move relocation list pointers onto the stack rather than using global variables. Fixes: 8fd6c5142395 ("riscv: Add remaining module relocations") Reported-by: Ron Economos <re@w6rz.net> Closes: https://lore.kernel.org/linux-riscv/444de86a-7e7c-4de7-5d1d-c1c40eefa4ba@w6rz.net Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231127-module_linking_freeing-v4-1-a2ca1d7027d0@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-12-04nvme: fix deadlock between reset and scanBitao Hu
If controller reset occurs when allocating namespace, both nvme_reset_work and nvme_scan_work will hang, as shown below. Test Scripts: for ((t=1;t<=128;t++)) do nsid=`nvme create-ns /dev/nvme1 -s 14537724 -c 14537724 -f 0 -m 0 \ -d 0 | awk -F: '{print($NF);}'` nvme attach-ns /dev/nvme1 -n $nsid -c 0 done nvme reset /dev/nvme1 We will find that both nvme_reset_work and nvme_scan_work hung: INFO: task kworker/u249:4:17848 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u249:4 state:D stack: 0 pid:17848 ppid: 2 flags:0x00000028 Workqueue: nvme-reset-wq nvme_reset_work [nvme] Call trace: __switch_to+0xb4/0xfc __schedule+0x22c/0x670 schedule+0x4c/0xd0 blk_mq_freeze_queue_wait+0x84/0xc0 nvme_wait_freeze+0x40/0x64 [nvme_core] nvme_reset_work+0x1c0/0x5cc [nvme] process_one_work+0x1d8/0x4b0 worker_thread+0x230/0x440 kthread+0x114/0x120 INFO: task kworker/u249:3:22404 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u249:3 state:D stack: 0 pid:22404 ppid: 2 flags:0x00000028 Workqueue: nvme-wq nvme_scan_work [nvme_core] Call trace: __switch_to+0xb4/0xfc __schedule+0x22c/0x670 schedule+0x4c/0xd0 rwsem_down_write_slowpath+0x32c/0x98c down_write+0x70/0x80 nvme_alloc_ns+0x1ac/0x38c [nvme_core] nvme_validate_or_alloc_ns+0xbc/0x150 [nvme_core] nvme_scan_ns_list+0xe8/0x2e4 [nvme_core] nvme_scan_work+0x60/0x500 [nvme_core] process_one_work+0x1d8/0x4b0 worker_thread+0x260/0x440 kthread+0x114/0x120 INFO: task nvme:28428 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:nvme state:D stack: 0 pid:28428 ppid: 27119 flags:0x00000000 Call trace: __switch_to+0xb4/0xfc __schedule+0x22c/0x670 schedule+0x4c/0xd0 schedule_timeout+0x160/0x194 do_wait_for_common+0xac/0x1d0 __wait_for_common+0x78/0x100 wait_for_completion+0x24/0x30 __flush_work.isra.0+0x74/0x90 flush_work+0x14/0x20 nvme_reset_ctrl_sync+0x50/0x74 [nvme_core] nvme_dev_ioctl+0x1b0/0x250 [nvme_core] __arm64_sys_ioctl+0xa8/0xf0 el0_svc_common+0x88/0x234 do_el0_svc+0x7c/0x90 el0_svc+0x1c/0x30 el0_sync_handler+0xa8/0xb0 el0_sync+0x148/0x180 The reason for the hang is that nvme_reset_work occurs while nvme_scan_work is still running. nvme_scan_work may add new ns into ctrl->namespaces list after nvme_reset_work frozen all ns->q in ctrl->namespaces list. The newly added ns is not frozen, so nvme_wait_freeze will wait forever. Unfortunately, ctrl->namespaces_rwsem is held by nvme_reset_work, so nvme_scan_work will also wait forever. Now we are deadlocked! PROCESS1 PROCESS2 ============== ============== nvme_scan_work ... nvme_reset_work nvme_validate_or_alloc_ns nvme_dev_disable nvme_alloc_ns nvme_start_freeze down_write ... nvme_ns_add_to_ctrl_list ... up_write nvme_wait_freeze ... down_read nvme_alloc_ns blk_mq_freeze_queue_wait down_write Fix by marking the ctrl with say NVME_CTRL_FROZEN flag set in nvme_start_freeze and cleared in nvme_unfreeze. Then the scan can check it before adding the new namespace (under the namespaces_rwsem). Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com> Reviewed-by: Guixin Liu <kanie@linux.alibaba.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-04nvme: prevent potential spectre v1 gadgetNitesh Shetty
This patch fixes the smatch warning, "nvmet_ns_ana_grpid_store() warn: potential spectre issue 'nvmet_ana_group_enabled' [w] (local cap)" Prevent the contents of kernel memory from being leaked to user space via speculative execution by using array_index_nospec. Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-04nvme: improve NVME_HOST_AUTH and NVME_TARGET_AUTH config descriptionsShin'ichiro Kawasaki
Currently two similar config options NVME_HOST_AUTH and NVME_TARGET_AUTH have almost same descriptions. It is confusing to choose them in menuconfig. Improve the descriptions to distinguish them. Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-04nvme-ioctl: move capable() admin check to the endKeith Busch
This can be an expensive call on some kernel configs. Move it to the end after checking the cheaper ways to determine if the command is allowed. Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-04nvme: ensure reset state check orderingKeith Busch
A different CPU may be setting the ctrl->state value, so ensure proper barriers to prevent optimizing to a stale state. Normally it isn't a problem to observe the wrong state as it is merely advisory to take a quicker path during initialization and error recovery, but seeing an old state can report unexpected ENETRESET errors when a reset request was in fact successful. Reported-by: Minh Hoang <mh2022@meta.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.de>
2023-12-04nvme: introduce helper function to get ctrl stateKeith Busch
The controller state is typically written by another CPU, so reading it should ensure no optimizations are taken. This is a repeated pattern in the driver, so start with adding a convenience function that returns the controller state with READ_ONCE(). Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-12-04ASoC: qcom: sc8280xp: Limit speaker digital volumesSrinivas Kandagatla
Limit the speaker digital gains to 0dB so that the users will not damage them. Currently there is a limit in UCM, but this does not stop the user form changing the digital gains from command line. So limit this in driver which makes the speakers more safer without active speaker protection in place. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231204124736.132185-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-04ASoC: ops: add correct range check for limiting volumeSrinivas Kandagatla
Volume can have ranges that start with negative values, ex: -84dB to +40dB. Apply correct range check in snd_soc_limit_volume before setting the platform_max. Without this patch, for example setting a 0dB limit on a volume range of -84dB to +40dB would fail. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231204124736.132185-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-04ALSA: hda/realtek: Enable headset on Lenovo M90 Gen5Bin Li
Lenovo M90 Gen5 is equipped with ALC897, and it needs ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work. Signed-off-by: Bin Li <bin.li@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231204100450.642783-1-bin.li@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-04ALSA: hda/realtek: fix speakers on XPS 9530 (2023)Aleksandrs Vinarskis
XPS 9530 has 2 tweeters and 2 subwoofers powered by CS35L41 amplifier, SPI connected. For subwoofers to work, it requires both to enable amplifier support, and to enable output to subwoofers via 0x17 quirk (similalry to XPS 9510/9520). Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231203233006.100558-1-alex.vinarskis@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-04ALSA: usb-audio: Add Pioneer DJM-450 mixer controlsSarah Grant
These values mirror those of the Pioneer DJM-250MK2 as the channel layout appears identical based on my observations. This duplication could be removed in later contributions if desired. Signed-off-by: Sarah Grant <s@srd.tw> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231201181654.5058-1-s@srd.tw Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-04usb: typec: class: fix typec_altmode_put_partner to put plugsRD Babiera
When typec_altmode_put_partner is called by a plug altmode upon release, the port altmode the plug belongs to will not remove its reference to the plug. The check to see if the altmode being released evaluates against the released altmode's partner instead of the calling altmode itself, so change adev in typec_altmode_put_partner to properly refer to the altmode being released. typec_altmode_set_partner is not run for port altmodes, so also add a check in typec_altmode_release to prevent typec_altmode_put_partner() calls on port altmode release. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231129192349.1773623-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-04USB: gadget: core: adjust uevent timing on gadget unbindRoy Luo
The KOBJ_CHANGE uevent is sent before gadget unbind is actually executed, resulting in inaccurate uevent emitted at incorrect timing (the uevent would have USB_UDC_DRIVER variable set while it would soon be removed). Move the KOBJ_CHANGE uevent to the end of the unbind function so that uevent is sent only after the change has been made. Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class") Cc: stable@vger.kernel.org Signed-off-by: Roy Luo <royluo@google.com> Link: https://lore.kernel.org/r/20231128221756.2591158-1-royluo@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-04platform/mellanox: Check devm_hwmon_device_register_with_groups() return valueKunwu Chan
devm_hwmon_device_register_with_groups() returns an error pointer upon failure. Check its return value for errors. Compile-tested only. Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver") Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Suggested-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn [ij: split the change into two] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-04platform/mellanox: Add null pointer checks for devm_kasprintf()Kunwu Chan
devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Compile-tested only. Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver") Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Suggested-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn [ij: split the change into two] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-04ASoC: wm_adsp: fix memleak in wm_adsp_buffer_populateDinghao Liu
When wm_adsp_buffer_read() fails, we should free buf->regions. Otherwise, the callers of wm_adsp_buffer_populate() will directly free buf on failure, which makes buf->regions a leaked memory. Fixes: a792af69b08f ("ASoC: wm_adsp: Refactor compress stream initialisation") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231204074158.12026-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-04ASoC: da7219: Support low DC impedance headsetDavid Rau
Change the default MIC detection impedance threshold to 200ohm to support low mic DC impedance headset. Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com> Link: https://lore.kernel.org/r/20231201042933.26392-1-David.Rau.opensource@dm.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-04ASoC: amd: acp: Add support for a new Huawei Matebook laptopMarian Postevca
This commit adds support for Huawei MateBook D16 2021 with Ryzen 4600H in driver acp3x-es83xx. Signed-off-by: Marian Postevca <posteuca@mutex.one> Link: https://lore.kernel.org/r/20231202223001.8025-1-posteuca@mutex.one Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-04mlxbf-bootctl: correctly identify secure boot with development keysDavid Thompson
The secure boot state of the BlueField SoC is represented by two bits: 0 = production state 1 = secure boot enabled 2 = non-secure (secure boot disabled) 3 = RMA state There is also a single bit to indicate whether production keys or development keys are being used when secure boot is enabled. This single bit (specified by MLXBF_BOOTCTL_SB_DEV_MASK) only has meaning if secure boot state equals 1 (secure boot enabled). The secure boot states are as follows: - “GA secured” is when secure boot is enabled with official production keys. - “Secured (development)” is when secure boot is enabled with development keys. Without this fix “GA Secured” is displayed on development cards which is misleading. This patch updates the logic in "lifecycle_state_show()" to handle the case where the SoC is configured for secure boot and is using development keys. Fixes: 79e29cb8fbc5c ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc") Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com> Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20231130183515.17214-1-davthompson@nvidia.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-04regmap: fix bogus error on regcache_sync successMatthias Reichl
Since commit 0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync") opening pcm512x based soundcards fail with EINVAL and dmesg shows sync cache and pm_runtime_get errors: [ 228.794676] pcm512x 1-004c: Failed to sync cache: -22 [ 228.794740] pcm512x 1-004c: ASoC: error at snd_soc_pcm_component_pm_runtime_get on pcm512x.1-004c: -22 This is caused by the cache check result leaking out into the regcache_sync return value. Fix this by making the check local-only, as the comment above the regcache_read call states a non-zero return value means there's nothing to do so the return value should not be altered. Fixes: 0ec7731655de ("regmap: Ensure range selector registers are updated after cache sync") Cc: stable@vger.kernel.org Signed-off-by: Matthias Reichl <hias@horus.com> Link: https://lore.kernel.org/r/20231203222216.96547-1-hias@horus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-04firmware: arm_scmi: Fix possible frequency truncation when using level ↵Sudeep Holla
indexing mode The multiplier is already promoted to unsigned long, however the frequency calculations done when using level indexing mode doesn't use the multiplier computed. It instead hardcodes the multiplier value of 1000 at all the usage sites. Clean that up by assigning the multiplier value of 1000 when using the perf level indexing mode and update the frequency calculations to use the multiplier instead. It should fix the possible frequency truncation for all the values greater than or equal to 4GHz on 64-bit machines. Fixes: 31c7c1397a33 ("firmware: arm_scmi: Add v3.2 perf level indexing mode support") Reported-by: Sibi Sankar <quic_sibis@quicinc.com> Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/ Cc: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20231130204343.503076-2-sudeep.holla@arm.com Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-12-04firmware: arm_scmi: Fix frequency truncation by promoting multiplier typeSudeep Holla
Fix the possible frequency truncation for all values equal to or greater 4GHz on 64bit machines by updating the multiplier 'mult_factor' to 'unsigned long' type. It is also possible that the multiplier itself can be greater than or equal to 2^32. So we need to also fix the equation computing the value of the multiplier. Fixes: a9e3fbfaa0ff ("firmware: arm_scmi: add initial support for performance protocol") Reported-by: Sibi Sankar <quic_sibis@quicinc.com> Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/ Cc: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20231130204343.503076-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-12-04r8152: Add RTL8152_INACCESSIBLE to r8153_aldps_en()Douglas Anderson
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8153_aldps_en(). Fixes: 4214cc550bf9 ("r8152: check if disabling ALDPS is finished") Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-04r8152: Add RTL8152_INACCESSIBLE to r8153_pre_firmware_1()Douglas Anderson
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8153_pre_firmware_1(). Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153") Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-04r8152: Add RTL8152_INACCESSIBLE to r8156b_wait_loading_flash()Douglas Anderson
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8156b_wait_loading_flash(). Fixes: 195aae321c82 ("r8152: support new chips") Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-04r8152: Add RTL8152_INACCESSIBLE checks to more loopsDouglas Anderson
Previous commits added checks for RTL8152_INACCESSIBLE in the loops in the driver. There are still a few more that keep tripping the driver up in error cases and make things take longer than they should. Add those in. All the loops that are part of this commit existed in some form or another since the r8152 driver was first introduced, though RTL8152_INACCESSIBLE was known as RTL8152_UNPLUG before commit 715f67f33af4 ("r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE") Fixes: ac718b69301c ("net/usb: new driver for RTL8152") Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-04r8152: Hold the rtnl_lock for all of resetDouglas Anderson
As of commit d9962b0d4202 ("r8152: Block future register access if register access fails") there is a race condition that can happen between the USB device reset thread and napi_enable() (not) getting called during rtl8152_open(). Specifically: * While rtl8152_open() is running we get a register access error that's _not_ -ENODEV and queue up a USB reset. * rtl8152_open() exits before calling napi_enable() due to any reason (including usb_submit_urb() returning an error). In that case: * Since the USB reset is perform in a separate thread asynchronously, it can run at anytime USB device lock is not held - even before rtl8152_open() has exited with an error and caused __dev_open() to clear the __LINK_STATE_START bit. * The rtl8152_pre_reset() will notice that the netif_running() returns true (since __LINK_STATE_START wasn't cleared) so it won't exit early. * rtl8152_pre_reset() will then hang in napi_disable() because napi_enable() was never called. We can fix the race by making sure that the r8152 reset routines don't run at the same time as we're opening the device. Specifically we need the reset routines in their entirety rely on the return value of netif_running(). The only way to reliably depend on that is for them to hold the rntl_lock() mutex for the duration of reset. Grabbing the rntl_lock() mutex for the duration of reset seems like a long time, but reset is not expected to be common and the rtnl_lock() mutex is already held for long durations since the core grabs it around the open/close calls. Fixes: d9962b0d4202 ("r8152: Block future register access if register access fails") Reviewed-by: Grant Grundler <grundler@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-04greybus: gb-beagleplay: Ensure le for values in transportAyush Singh
Ensure that the following values are little-endian: - header->pad (which is used for cport_id) - header->size Fixes: ec558bbfea67 ("greybus: Add BeaglePlay Linux Driver") Reported-by: kernel test robot <yujie.liu@intel.com> Closes: https://lore.kernel.org/r/202311072329.Xogj7hGW-lkp@intel.com/ Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com> Link: https://lore.kernel.org/r/20231203075312.255233-1-ayushdevel1325@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-04greybus: BeaglePlay driver needs CRC_CCITTRandy Dunlap
The gb-beagleplay driver uses crc_ccitt(), so it should select CRC_CCITT to make sure that the function is available. Fixes these build errors: s390-linux-ld: drivers/greybus/gb-beagleplay.o: in function `hdlc_append_tx_u8': gb-beagleplay.c:(.text+0x2c0): undefined reference to `crc_ccitt' s390-linux-ld: drivers/greybus/gb-beagleplay.o: in function `hdlc_rx_frame': gb-beagleplay.c:(.text+0x6a0): undefined reference to `crc_ccitt' Fixes: ec558bbfea67 ("greybus: Add BeaglePlay Linux Driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Ayush Singh <ayushdevel1325@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: greybus-dev@lists.linaro.org Link: https://lore.kernel.org/r/20231031040909.21201-1-rdunlap@infradead.org Reviewed-by: Ayush Singh <ayushdevel1325@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-04Revert "debugfs: annotate debugfs handlers vs. removal with lockdep"Johannes Berg
This reverts commit f4acfcd4deb1 ("debugfs: annotate debugfs handlers vs. removal with lockdep"), it appears to have false positives and really shouldn't have been in the -rc series with the fixes anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20231202114936.fd55431ab160.I911aa53abeeca138126f690d383a89b13eb05667@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-04Merge 6.7-rc4 into char-misc-linusGreg Kroah-Hartman
We need 6.7-rc4 in here as we need to revert one of the debugfs changes that came in that release through the wireless tree. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-03io_uring: fix mutex_unlock with unreferenced ctxPavel Begunkov
Callers of mutex_unlock() have to make sure that the mutex stays alive for the whole duration of the function call. For io_uring that means that the following pattern is not valid unless we ensure that the context outlives the mutex_unlock() call. mutex_lock(&ctx->uring_lock); req_put(req); // typically via io_req_task_submit() mutex_unlock(&ctx->uring_lock); Most contexts are fine: io-wq pins requests, syscalls hold the file, task works are taking ctx references and so on. However, the task work fallback path doesn't follow the rule. Cc: <stable@vger.kernel.org> Fixes: 04fc6c802d ("io_uring: save ctx put/get for task_work submit") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/io-uring/CAG48ez3xSoYb+45f1RLtktROJrpiDQ1otNvdR+YLQf7m+Krj5Q@mail.gmail.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-12-03hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe()Christophe JAILLET
There is no point in calling hid_hw_stop() if hid_hw_start() has failed. There is no point in calling hid_hw_close() if hid_hw_open() has failed. Update the error handling path accordingly. Fixes: 82e3430dfa8c ("hwmon: add driver for NZXT Kraken X42/X52/X62/X72") Reported-by: Aleksa Savic <savicaleksa83@gmail.com> Closes: https://lore.kernel.org/all/121470f0-6c1f-418a-844c-7ec2e8a54b8e@gmail.com/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jonas Malaco <jonas@protocubo.io> Link: https://lore.kernel.org/r/a768e69851a07a1f4e29f270f4e2559063f07343.1701617030.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-12-03Linux 6.7-rc4v6.7-rc4Linus Torvalds
2023-12-03ALSA: hda/realtek: Apply quirk for ASUS UM3504DAPascal Noël
The ASUS UM3504DA uses a Realtek HDA codec and two CS35L41 amplifiers via I2C. Apply existing quirk to model. Signed-off-by: Pascal Noël <pascal@pascalcompiles.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231202013744.12369-1-pascal@pascalcompiles.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-03Merge tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: - Two fallocate fixes - Fix warnings from new gcc - Two symlink fixes * tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: client, common: fix fortify warnings cifs: Fix FALLOC_FL_INSERT_RANGE by setting i_size after EOF moved cifs: Fix FALLOC_FL_ZERO_RANGE by setting i_size if EOF moved smb: client: report correct st_size for SMB and NFS symlinks smb: client: fix missing mode bits for SMB symlinks
2023-12-03Merge tag 'firewire-fixes-6.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "A single patch to fix long-standing issue of memory leak at failure of device registration for fw_unit. We rarely encounter the issue, but it should be applied to stable releases, since it fixes inappropriate API usage" * tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: fix possible memory leak in create_units()
2023-12-03Merge tag 'powerpc-6.7-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix corruption of f0/vs0 during FP/Vector save, seen as userspace crashes when using io-uring workers (in particular with MariaDB) - Fix KVM_RUN potentially clobbering all host userspace FP/Vector registers Thanks to Timothy Pearson, Jens Axboe, and Nicholas Piggin. * tag 'powerpc-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers powerpc: Don't clobber f0/vs0 during fp|altivec register save
2023-12-03Merge tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fixes from Alex Williamson: - Fix the lifecycle of a mutex in the pds variant driver such that a reset prior to opening the device won't find it uninitialized. Implement the release path to symmetrically destroy the mutex. Also switch a different lock from spinlock to mutex as the code path has the potential to sleep and doesn't need the spinlock context otherwise (Brett Creeley) - Fix an issue detected via randconfig where KVM tries to symbol_get an undeclared function. The symbol is temporarily declared unconditionally here, which resolves the problem and avoids churn relative to a series pending for the next merge window which resolves some of this symbol ugliness, but also fixes Kconfig dependencies (Sean Christopherson) * tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfio: vfio: Drop vfio_file_iommu_group() stub to fudge around a KVM wart vfio/pds: Fix possible sleep while in atomic context vfio/pds: Fix mutex lock->magic != lock warning
2023-12-03Merge tag 'for-linus-6.7a-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - A fix for the Xen event driver setting the correct return value when experiencing an allocation failure - A fix for allocating space for a struct in the percpu area to not cross page boundaries (this one is for x86, a similar one for Arm was already in the pull request for rc3) * tag 'for-linus-6.7a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: fix error code in xen_bind_pirq_msi_to_irq() x86/xen: fix percpu vcpu_info allocation
2023-12-03Merge tag 'probes-fixes-v6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - objpool: Fix objpool overrun case on memory/cache access delay especially on the big.LITTLE SoC. The objpool uses a copy of object slot index internal loop, but the slot index can be changed on another processor in parallel. In that case, the difference of 'head' local copy and the 'slot->last' index will be bigger than local slot size. In that case, we need to re-read the slot::head to update it. - kretprobe: Fix to use appropriate rcu API for kretprobe holder. Since kretprobe_holder::rp is RCU managed, it should use rcu_assign_pointer() and rcu_dereference_check() correctly. Also adding __rcu tag for finding wrong usage by sparse. - rethook: Fix to use appropriate rcu API for rethook::handler. The same as kretprobe, rethook::handler is RCU managed and it should use rcu_assign_pointer() and rcu_dereference_check(). This also adds __rcu tag for finding wrong usage by sparse. * tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rethook: Use __rcu pointer for rethook::handler kprobes: consistent rcu api usage for kretprobe holder lib: objpool: fix head overrun on RK3588 SBC
2023-12-02r8169: fix rtl8125b PAUSE frames blasting when suspendedChunHao Lin
When FIFO reaches near full state, device will issue pause frame. If pause slot is enabled(set to 1), in this time, device will issue pause frame only once. But if pause slot is disabled(set to 0), device will keep sending pause frames until FIFO reaches near empty state. When pause slot is disabled, if there is no one to handle receive packets, device FIFO will reach near full state and keep sending pause frames. That will impact entire local area network. This issue can be reproduced in Chromebox (not Chromebook) in developer mode running a test image (and v5.10 kernel): 1) ping -f $CHROMEBOX (from workstation on same local network) 2) run "powerd_dbus_suspend" from command line on the $CHROMEBOX 3) ping $ROUTER (wait until ping fails from workstation) Takes about ~20-30 seconds after step 2 for the local network to stop working. Fix this issue by enabling pause slot to only send pause frame once when FIFO reaches near full state. Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Reported-by: Grant Grundler <grundler@chromium.org> Tested-by: Grant Grundler <grundler@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: ChunHao Lin <hau@realtek.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20231129155350.5843-1-hau@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-02arm64: dts: rockchip: Fix Turing RK1 interrupt pinctrlsSam Edwards
The pinctrls for the hym8563 interrupt line and fan-tach input were both mistakenly defined as `pcfg_pull_none`. As these are active-low signals (level-triggered, in the hym8563 case) which may not be driven at times, these should really be pull-up. The lack of any bias results in spurious interrupts. Fix this by modifying the `rockchip,pins` properties as necessary to enable the pull-up resistors. Fixes: 2806a69f3fef6 ("arm64: dts: rockchip: Add Turing RK1 SoM support") Signed-off-by: Sam Edwards <CFSworks@gmail.com> Link: https://lore.kernel.org/r/20231202071212.1606800-1-CFSworks@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-02x86/CPU/AMD: Check vendor in the AMD microcode callbackBorislav Petkov (AMD)
Commit in Fixes added an AMD-specific microcode callback. However, it didn't check the CPU vendor the kernel runs on explicitly. The only reason the Zenbleed check in it didn't run on other x86 vendors hardware was pure coincidental luck: if (!cpu_has_amd_erratum(c, amd_zenbleed)) return; gives true on other vendors because they don't have those families and models. However, with the removal of the cpu_has_amd_erratum() in 05f5f73936fa ("x86/CPU/AMD: Drop now unused CPU erratum checking function") that coincidental condition is gone, leading to the zenbleed check getting executed on other vendors too. Add the explicit vendor check for the whole callback as it should've been done in the first place. Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix") Cc: <stable@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20231201184226.16749-1-bp@alien8.de
generated by cgit (git 2.34.1) at 2025-09-12 20:13:43 +0000