summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-11tools headers uapi: Update tools's copy of linux/perf_event.hArnaldo Carvalho de Melo
To get the changes in: 09121255c784 ("perf/UAPI: Clearly mark __PERF_SAMPLE_CALLCHAIN_EARLY as internal use") This cures the following warning during perf's build: Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h' diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-2vvwh2o19orn56di0ksrtgzr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-09-11drm/i915/chv: Update csc coefficient matrix during modesetP Raviraj Sitaram
During modeset, previously configured csc coefficient matrix,if any, will not persist. This can result in blank screen as csc mode will be programmed while loading LUT but csc coefficient matrix remains unprogrammed. Changes since V1: - Removed platform check Signed-off-by: P Raviraj Sitaram <raviraj.p.sitaram@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1536589634-29680-1-git-send-email-raviraj.p.sitaram@intel.com
2018-09-11PCI: pciehp: Fix hot-add vs powerfault detection orderKeith Busch
If both hot-add and power fault were observed in a single interrupt, we handled the hot-add first, then the power fault, in this path: pciehp_ist if (events & (PDC | DLLSC)) pciehp_handle_presence_or_link_change case OFF_STATE: pciehp_enable_slot __pciehp_enable_slot board_added pciehp_power_on_slot ctrl->power_fault_detected = 0 pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_ON, PCI_EXP_SLTCTL_PCC) pciehp_green_led_on(p_slot) # power LED on pciehp_set_attention_status(p_slot, 0) # attention LED off if ((events & PFD) && !ctrl->power_fault_detected) ctrl->power_fault_detected = 1 pciehp_set_attention_status(1) # attention LED on pciehp_green_led_off(slot) # power LED off This left the attention indicator on (even though the hot-add succeeded) and the power indicator off (even though the slot power was on). Fix this by checking for power faults before checking for new devices. Prior to 0e94916e6091, this was successful because everything was chained through work queues and the order was: INT_PRESENCE_ON -> INT_POWER_FAULT -> ENABLE_REQ The ENABLE_REQ cleared the power fault at the end, but now everything is handled inline with the interrupt thread, such that the work ENABLE_REQ was doing happens before power fault handling now. Fixes: 0e94916e6091 ("PCI: pciehp: Handle events synchronously") Signed-off-by: Keith Busch <keith.busch@intel.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2018-09-11switchtec: Fix Spectre v1 vulnerabilityGustavo A. R. Silva
p.port can is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/pci/switch/switchtec.c:912 ioctl_port_to_pff() warn: potential spectre issue 'pcfg->dsp_pff_inst_id' [r] Fix this by sanitizing p.port before using it to index pcfg->dsp_pff_inst_id Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> Cc: stable@vger.kernel.org
2018-09-11Revert "PCI: Add ACS quirk for Intel 300 series"Mika Westerberg
This reverts f154a718e6cc ("PCI: Add ACS quirk for Intel 300 series"). It turns out that erratum "PCH PCIe* Controller Root Port (ACSCTLR) Appear As Read Only" has been fixed in 300 series chipsets, even though the datasheet [1] claims otherwise. To make ACS work properly on 300 series root ports, revert the faulty commit. [1] https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/300-series-c240-series-chipset-pch-spec-update.pdf Fixes: f154a718e6cc ("PCI: Add ACS quirk for Intel 300 series") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v4.18+
2018-09-11MAINTAINERS: Add Gustavo Pimentel as DesignWare PCI maintainerJoao Pinto
Currently I am managing the Synopsys drivers & tools team (full-time) and so I am passing the pcie-designware maintenance to Gustavo. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Gustavo Pimentel <gustavo.pimentel@synopsys.com> CC: Jingoo Han <jingoohan1@gmail.com>
2018-09-11MAINTAINERS: Add entries for PPC64 RPA PCI hotplug driversTyrel Datwyler
Add myself as maintainer of the IBM RPA hotplug modules in the drivers/pci/hotplug directory. These modules provide kernel interfaces for support of Dynamic Logical Partitioning (DLPAR) of Logical and Physical IO slots, and hotplug of physical PCI slots of a PHB on RPA-compliant ppc64 platforms (pseries). Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-11drm/fb: Stop leaking physical addressDaniel Vetter
For buffer sharing, use dma-buf instead. We can't set smem_start to 0 unconditionally since that's used by the fbdev mmap default implementation. And we have plenty of userspace which would like to keep that working. This might break legit userspace - if it does we need to look at a case-by-cases basis how to handle that. Worst case I expect overrides for only specific drivers, since anything remotely modern should be using dma-buf/prime now (which is about 7 years old now for DRM drivers). This issue was uncovered because Noralf's rework to implement a generic fb_probe also implements it's own fb_mmap callback. Which means smem_start didn't have to be set anymore, which blew up some blob in userspace rather badly. Acked-by: Sean Paul <seanpaul@chromium.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: John Stultz <john.stultz@linaro.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-4-daniel.vetter@ffwll.ch
2018-09-11fbdev: Add FBINFO_HIDE_SMEM_START flagDaniel Vetter
DRM drivers really, really, really don't want random userspace to share buffer behind it's back, bypassing the dma-buf buffer sharing machanism. For that reason we've ruthlessly rejected any IOCTL exposing the physical address of any graphics buffer. Unfortunately fbdev comes with that built-in. We could just set smem_start to 0, but that means we'd have to hand-roll our own fb_mmap implementation. For good reasons many drivers do that, but smem_start/length is still super convenient. Hence instead just stop the leak in the ioctl, to keep fb mmap working as-is. A second patch will set this flag for all drm drivers. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kees Cook <keescook@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: linux-fbdev@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-3-daniel.vetter@ffwll.ch
2018-09-11vt: Remove vc_panic_force_writeDaniel Vetter
It was only used by the panic support in fbcon, which is now gone. Remove this now dead code too. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Joe Perches <joe@perches.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Meng Xu <mengxu.gatech@gmail.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: Mike Frysinger <vapier@chromium.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <treding@nvidia.com> Cc: David Lechner <david@lechnology.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-2-daniel.vetter@ffwll.ch
2018-09-11fbdev: Drop FBINFO_CAN_FORCE_OUTPUT flagDaniel Vetter
This was only added for the drm's fbdev emulation support, so that it would try harder to show the Oops. Unfortunately this never really worked reliably, and in practice ended up pushing the real Oops off the screen due to plentyfull locking, sleep-while-atomic and other issues. So we removed all that support from the fbdev emulation a while back. Aside: We've also removed the kgdb support, for similar reasons. Since it's such a small patch I figured I don't split this up into the usual 3-phase removal. Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Thierry Reding <treding@nvidia.com> Cc: David Lechner <david@lechnology.com> Cc: nouveau@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-1-daniel.vetter@ffwll.ch
2018-09-11Bluetooth: hci_ldisc: Free rw_semaphore on closeHermes Zhang
The percpu_rw_semaphore is not currently freed, and this leads to a crash when the stale rcu callback is invoked. DEBUG_OBJECTS detects this. ODEBUG: free active (active state 1) object type: rcu_head hint: (null) ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2024 at debug_print_object+0xac/0xc8 PC is at debug_print_object+0xac/0xc8 LR is at debug_print_object+0xac/0xc8 Call trace: [<ffffff80082e2c2c>] debug_print_object+0xac/0xc8 [<ffffff80082e40b0>] debug_check_no_obj_freed+0x1e8/0x228 [<ffffff8008191254>] kfree+0x1cc/0x250 [<ffffff80083cc03c>] hci_uart_tty_close+0x54/0x108 [<ffffff800832e118>] tty_ldisc_close.isra.1+0x40/0x58 [<ffffff800832e14c>] tty_ldisc_kill+0x1c/0x40 [<ffffff800832e3dc>] tty_ldisc_release+0x94/0x170 [<ffffff8008325554>] tty_release_struct+0x1c/0x58 [<ffffff8008326400>] tty_release+0x3b0/0x490 [<ffffff80081a3fe8>] __fput+0x88/0x1d0 [<ffffff80081a418c>] ____fput+0xc/0x18 [<ffffff80080c0624>] task_work_run+0x9c/0xc0 [<ffffff80080a9e24>] do_exit+0x24c/0x8a0 [<ffffff80080aa4e0>] do_group_exit+0x38/0xa0 [<ffffff80080aa558>] __wake_up_parent+0x0/0x28 [<ffffff8008082c00>] el0_svc_naked+0x34/0x38 ---[ end trace bfe08cbd89098cdf ]--- Signed-off-by: Hermes Zhang <chenhuiz@axis.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-11Bluetooth: Use correct tfm to generate OOB dataMatias Karhumaa
In case local OOB data was generated and other device initiated pairing claiming that it has got OOB data, following crash occurred: [ 222.847853] general protection fault: 0000 [#1] SMP PTI [ 222.848025] CPU: 1 PID: 42 Comm: kworker/u5:0 Tainted: G C 4.18.0-custom #4 [ 222.848158] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 222.848307] Workqueue: hci0 hci_rx_work [bluetooth] [ 222.848416] RIP: 0010:compute_ecdh_secret+0x5a/0x270 [bluetooth] [ 222.848540] Code: 0c af f5 48 8b 3d 46 de f0 f6 ba 40 00 00 00 be c0 00 60 00 e8 b7 7b c5 f5 48 85 c0 0f 84 ea 01 00 00 48 89 c3 e8 16 0c af f5 <49> 8b 47 38 be c0 00 60 00 8b 78 f8 48 83 c7 48 e8 51 84 c5 f5 48 [ 222.848914] RSP: 0018:ffffb1664087fbc0 EFLAGS: 00010293 [ 222.849021] RAX: ffff8a5750d7dc00 RBX: ffff8a5671096780 RCX: ffffffffc08bc32a [ 222.849111] RDX: 0000000000000000 RSI: 00000000006000c0 RDI: ffff8a5752003800 [ 222.849192] RBP: ffffb1664087fc60 R08: ffff8a57525280a0 R09: ffff8a5752003800 [ 222.849269] R10: ffffb1664087fc70 R11: 0000000000000093 R12: ffff8a5674396e00 [ 222.849350] R13: ffff8a574c2e79aa R14: ffff8a574c2e796a R15: 020e0e100d010101 [ 222.849429] FS: 0000000000000000(0000) GS:ffff8a5752500000(0000) knlGS:0000000000000000 [ 222.849518] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 222.849586] CR2: 000055856016a038 CR3: 0000000110d2c005 CR4: 00000000000606e0 [ 222.849671] Call Trace: [ 222.849745] ? sc_send_public_key+0x110/0x2a0 [bluetooth] [ 222.849825] ? sc_send_public_key+0x115/0x2a0 [bluetooth] [ 222.849925] smp_recv_cb+0x959/0x2490 [bluetooth] [ 222.850023] ? _cond_resched+0x19/0x40 [ 222.850105] ? mutex_lock+0x12/0x40 [ 222.850202] l2cap_recv_frame+0x109d/0x3420 [bluetooth] [ 222.850315] ? l2cap_recv_frame+0x109d/0x3420 [bluetooth] [ 222.850426] ? __switch_to_asm+0x34/0x70 [ 222.850515] ? __switch_to_asm+0x40/0x70 [ 222.850625] ? __switch_to_asm+0x34/0x70 [ 222.850724] ? __switch_to_asm+0x40/0x70 [ 222.850786] ? __switch_to_asm+0x34/0x70 [ 222.850846] ? __switch_to_asm+0x40/0x70 [ 222.852581] ? __switch_to_asm+0x34/0x70 [ 222.854976] ? __switch_to_asm+0x40/0x70 [ 222.857475] ? __switch_to_asm+0x40/0x70 [ 222.859775] ? __switch_to_asm+0x34/0x70 [ 222.861218] ? __switch_to_asm+0x40/0x70 [ 222.862327] ? __switch_to_asm+0x34/0x70 [ 222.863758] l2cap_recv_acldata+0x266/0x3c0 [bluetooth] [ 222.865122] hci_rx_work+0x1c9/0x430 [bluetooth] [ 222.867144] process_one_work+0x210/0x4c0 [ 222.868248] worker_thread+0x41/0x4d0 [ 222.869420] kthread+0x141/0x160 [ 222.870694] ? process_one_work+0x4c0/0x4c0 [ 222.871668] ? kthread_create_worker_on_cpu+0x90/0x90 [ 222.872896] ret_from_fork+0x35/0x40 [ 222.874132] Modules linked in: algif_hash algif_skcipher af_alg rfcomm bnep btusb btrtl btbcm btintel snd_intel8x0 cmac intel_rapl_perf vboxvideo(C) snd_ac97_codec bluetooth ac97_bus joydev ttm snd_pcm ecdh_generic drm_kms_helper snd_timer snd input_leds drm serio_raw fb_sys_fops soundcore syscopyarea sysfillrect sysimgblt mac_hid sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ahci psmouse libahci i2c_piix4 video e1000 pata_acpi [ 222.883153] fbcon_switch: detected unhandled fb_set_par error, error code -16 [ 222.886774] fbcon_switch: detected unhandled fb_set_par error, error code -16 [ 222.890503] ---[ end trace 6504aa7a777b5316 ]--- [ 222.890541] RIP: 0010:compute_ecdh_secret+0x5a/0x270 [bluetooth] [ 222.890551] Code: 0c af f5 48 8b 3d 46 de f0 f6 ba 40 00 00 00 be c0 00 60 00 e8 b7 7b c5 f5 48 85 c0 0f 84 ea 01 00 00 48 89 c3 e8 16 0c af f5 <49> 8b 47 38 be c0 00 60 00 8b 78 f8 48 83 c7 48 e8 51 84 c5 f5 48 [ 222.890555] RSP: 0018:ffffb1664087fbc0 EFLAGS: 00010293 [ 222.890561] RAX: ffff8a5750d7dc00 RBX: ffff8a5671096780 RCX: ffffffffc08bc32a [ 222.890565] RDX: 0000000000000000 RSI: 00000000006000c0 RDI: ffff8a5752003800 [ 222.890571] RBP: ffffb1664087fc60 R08: ffff8a57525280a0 R09: ffff8a5752003800 [ 222.890576] R10: ffffb1664087fc70 R11: 0000000000000093 R12: ffff8a5674396e00 [ 222.890581] R13: ffff8a574c2e79aa R14: ffff8a574c2e796a R15: 020e0e100d010101 [ 222.890586] FS: 0000000000000000(0000) GS:ffff8a5752500000(0000) knlGS:0000000000000000 [ 222.890591] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 222.890594] CR2: 000055856016a038 CR3: 0000000110d2c005 CR4: 00000000000606e0 This commit fixes a bug where invalid pointer to crypto tfm was used for SMP SC ECDH calculation when OOB was in use. Solution is to use same crypto tfm than when generating OOB material on generate_oob() function. This bug was introduced in commit c0153b0b901a ("Bluetooth: let the crypto subsystem generate the ecc privkey"). Bug was found by fuzzing kernel SMP implementation using Synopsys Defensics. Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-11Bluetooth: SMP: Fix trying to use non-existent local OOB dataJohan Hedberg
A remote device may claim that it has received our OOB data, even though we never geneated it. Add a new flag to track whether we actually have OOB data, and ignore the remote peer's flag if haven't generated OOB data. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-11drm: Clarify DRM_MODE_REFLECT_X/Y documentationAlexandru Gheorghe
DRM_MODE_REFLECT_X and DRM_MODE_REFLECT_Y meaning seems a bit unclear to me, so try to clarify that with a bit of ascii graphics. Changes since v1: - Move the ascii graphics in the kerneldoc where all plane properties are already documented and make sure it's properly rendered, suggestested by Daniel Vetter. Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180910172946.18539-1-alexandru-cosmin.gheorghe@arm.com
2018-09-11arm64: kernel: arch_crash_save_vmcoreinfo() should depend on CONFIG_CRASH_COREJames Morse
Since commit 23c85094fe18 ("proc/kcore: add vmcoreinfo note to /proc/kcore") the kernel has exported the vmcoreinfo PT_NOTE on /proc/kcore as well as /proc/vmcore. arm64 only exposes it's additional arch information via arch_crash_save_vmcoreinfo() if built with CONFIG_KEXEC, as kdump was previously the only user of vmcoreinfo. Move this weak function to a separate file that is built at the same time as its caller in kernel/crash_core.c. This ensures values like 'kimage_voffset' are always present in the vmcoreinfo PT_NOTE. CC: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-09-11arm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto"Miguel Ojeda
All other uses of "asm goto" go through asm_volatile_goto, which avoids a miscompile when using GCC < 4.8.2. Replace our open-coded "asm goto" statements with the asm_volatile_goto macro to avoid issues with older toolchains. Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-09-11Revert "printk: make sure to print log on console."Petr Mladek
This reverts commit 375899cddcbb26881b03cb3fbdcfd600e4e67f4a. The visibility of early messages did not longer take into account "quiet", "debug", and "loglevel" early parameters. It would be possible to invalidate and recompute LOG_NOCONS flag for the affected messages. But it would be hairy. Instead this patch just reverts the problematic commit. We could come up with a better solution for the original problem. For example, we could simplify the logic and just mark messages that should always be visible or always invisible on the console. Also this patch reverts the related build fix commit ffaa619af1b06 ("printk: Fix warning about unused suppress_message_printing"). Finally, this patch does not put back the unused LOG_NOCONS flag. Link: http://lkml.kernel.org/r/20180910145747.emvfzv4mzlk5dfqk@pathway.suse.cz Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: linux-kernel@vger.kernel.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Maninder Singh <maninder1.s@samsung.com> Reported-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-09-11drm: Remove set but not used variable 'config'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/drm_plane.c: In function 'drm_mode_getplane_res': drivers/gpu/drm/drm_plane.c:475:26: warning: variable 'config' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1536646814-186429-1-git-send-email-yuehaibing@huawei.com
2018-09-11Merge branch 'linux-4.19' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
A bunch of fixes for MST/runpm problems and races, as well as fixes for issues that prevent more recent laptops from booting. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==GF63dy8a9j611=-0x8G6FRu7uC-ZQypsLO_hqV4OAcA@mail.gmail.com
2018-09-10drm/amdgpu: move PSP init prior to IH in gpu resetEmily Deng
since we use PSP to program IH regs now Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: Fix SDMA hang in prt mode v2Tao Zhou
Fix SDMA hang in prt mode, clear XNACK_WATERMARK in reg SDMA0_UTCL1_WATERMK to avoid the issue Affected ASICs: VEGA10 VEGA12 RV1 RV2 v2: add reg clear for SDMA1 Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Tested-by: Yukun Li <yukun1.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: fix amdgpu_mn_unlock() in the CS error pathChristian König
Avoid unlocking a lock we never locked. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdkfd: Only add bi-directional iolink on GPU with XGMI or largebar (v2)shaoyunl
v2: compile fix Signed-off-by: shaoyunl <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdkfd: Generate xGMI direct iolinkShaoyun Liu
Generate xGMI iolink for upper level usage Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdkfd: Add new iolink type definesShaoyun Liu
Update the iolink type defines according to the new thunk spec Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdkfd: kfd expose the hive_id of the device through its node propertiesShaoyun Liu
Thunk will generate the XGMI topology information when necessary with the hive_id for each specified device Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: get_hive_id from amdgpu side (v2)Shaoyun Liu
Retrieve hive_id from amdgpu device v2: compile fix Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/include: Add get_hive_id interface in kfd2kgdShaoyun Liu
KFD need to get hive id from amdgpu to build up the XGMI topology Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu : Generate XGMI topology info from driver levelShaoyun Liu
Driver will save an array of XGMI hive info, each hive will have a list of devices that have the same hive ID. Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: Add place holder functions for xgmi topology interface with pspShaoyun Liu
Add dummy function for xgmi function interface with psp Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu : Add psp function interfaces for XGMI supportShaoyun Liu
Place holder for XGMI support Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu/gmc9: Adjust GART and AGP location with xgmi offset (v2)Alex Deucher
On hives with xgmi enabled, the fb_location aperture is a size which defines the total framebuffer size of all nodes in the hive. Each GPU in the hive has the same view via the fb_location aperture. GPU0 starts at offset (0 * segment size), GPU1 starts at offset (1 * segment size), etc. For access to local vram on each GPU, we need to take this offset into account. This including on setting up GPUVM page table and GART table v2: squash in "drm/amdgpu: Init correct fb region for none XGMI configuration" Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Slava Abramov <slava.abramov@amd.com> Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Huang Rui <ray.huang@amd.com>
2018-09-10drm/amdgpu/gmc9: add a new gfxhub 1.1 helper for xgmiAlex Deucher
Used to populate the xgmi info on vega20. v2: PF_MAX_REGION is val - 1 (Ray) Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Slava Abramov <slava.abramov@amd.com> Reviewed-by :Shaoyun liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by :Shaoyun liu <Shaoyun.liu@amd.com>
2018-09-10drm/amdgpu/gmc: add initial xgmi structure to amdgpu_gmc structureAlex Deucher
Initial pass at a structure to store xgmi info. xgmi is a high speed cross gpu interconnect. Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Slava Abramov <slava.abramov@amd.com> Reviewed-by :Shaoyun liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
2018-09-10drm/amd/include: update the bitfield define for PF_MAX_REGIONShaoyun Liu
Correct the definition based on vega20 register spec Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: move PSP init prior to IH in gpu resetEmily Deng
since we use PSP to program IH regs now Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: set bulk_moveable to false when a per VM is releasedChristian König
Otherwise we might run into a use after free during bulk move. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: Fix SDMA hang in prt mode v2Tao Zhou
Fix SDMA hang in prt mode, clear XNACK_WATERMARK in reg SDMA0_UTCL1_WATERMK to avoid the issue Affected ASICs: VEGA10 VEGA12 RV1 RV2 v2: add reg clear for SDMA1 Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Tested-by: Yukun Li <yukun1.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/powerplay: fix compile warning for wrong data type V2Evan Quan
do_div expects the 1st argument in 64bit instead of 32bit. Drop the usage of do_div as it seems unnecessary. V2: drop usage of do_div completely Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: Fix warnings while make xmldocsMasanari Iida
This patch fixes following warnings. ./drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:3011: warning: Excess function parameter 'dev' description in 'amdgpu_vm_get_task_info' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:3012: warning: Function parameter or member 'adev' not described in 'amdgpu_vm_get_task_info' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:3012: warning: Excess function parameter 'dev' description in 'amdgpu_vm_get_task_info' Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: Fix compute VM BO params after rebase v2Felix Kuehling
The intent of two commits was lost in the last rebase: 810955b drm/amdgpu: Fix acquiring VM on large-BAR systems b5d21aa drm/amdgpu: Don't use shadow BO for compute context This commit restores the original behaviour: * Don't set AMDGPU_GEM_CREATE_NO_CPU_ACCESS for page directories to allow them to be reused for compute VMs * Don't create shadow BOs for page tables in compute VMs v2: move more logic into amdgpu_vm_bo_param Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Kent Russell <Kent.Russell@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: enable AGP aperture for GMC9 v2Christian König
Enable the old AGP aperture to avoid GART mappings. v2: don't enable it for SRIOV Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: Clean up KFD init and finiFelix Kuehling
Only initialize KFD once by moving amdgpu_amdkfd_init from amdgpu_pci_probe to amdgpu_init. This fixes kernel oopses and hangs when booting multi-GPU systems. Also removed some vestiges of KFD being its own module. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: Add invariant support instrumentation in driverJun Lei
Existing debug dump are all invariant, new “low 32-bit of address” dump is not invariant Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: clean code for transition event log.Chiawen Huang
[Why] There are same purpose transition events. [How] remove the redundant event log. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: Remove call to amdgpu_pm_compute_clocksDavid Francis
[Why] The extraneous call to amdgpu_pm_compute_clocks is deprecated. [How] Remove it. Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: use link type to decide stream enc acquisitionEric Yang
[Why] Virtual sink is used when set mode happens on a disconnected display to allow the mode set to proceed. This did not work with MST because the logic for acquiring stream encoder uses stream signal to determine the special handling is required, and stream signal is virtual instead of DP in this case. [How] Use link type to decide instead. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: dc 3.1.65Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Steven Chiu <Steven.Chiu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: Reorder resource_pool to put i2c with auxDavid Francis
[Why] The i2c and aux engines are similar, and should be placed next to eachother for readability [How] Reorder the elements of the resource_pool struct Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 00:34:03 +0000