summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-10drm/amd/display: Use DRM helper for best_encoderLeo Li
[Why] Our implementation is functionally identical to DRM's Note that instead of checking if the provided id is 0, the helper follows through with the mode object search. However, It will still return NULL, since 0 is not a valid object id, and missed searches will return NULL. [How] Remove our implementation, and replace it with drm_atomic_helper_best_encoder. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: num of sw i2c/aux engines less than num of connectorsHersen Wu
[why] AMD Stoney reference board, there are only 2 pipes (not include underlay), and 3 connectors. resource creation, only 2 I2C/AUX engines are created. Within dc_link_aux_transfer, when pin_data_en =2, refer to enengines[ddc_pin->pin_data->en] = NULL. NULL point is referred later causing system crash. [how] each asic design has fixed number of ddc engines at hw side. for each ddc engine, create its i2x/aux engine at sw side. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: add aux transition event log.Chiawen Huang
[Why] Enhance aux transition debugging information. [How] Added Aux request and reply event log. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: add disconnect_delay to dc_panel_patchDerek Lai
Some display need disconnect delay. Adding this parameter for future use Signed-off-by: Derek Lai <Derek.Lai@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: remove unused clk_src codeDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: remove dead dc vbios codeDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: Add driver-side parsing for CMJun Lei
Although 4 unique register values exist for gamma modes, two are actually the same (the two RAMs) It’s not possible for caller to understand this HW specific behavior, so some parsing is necessary in driver Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: Fix DAL217 tests modify DTN logs for other testsGary Kattan
[Why]Update Code to get DTN golden log check to pass for tests run after DAL217 tests. [How]Change how dcn10_log_hw_state function prints HW state info (CM_GAMUT_REMAP_Cx_Cx registers) when GAMUT REMAP is in bypass mode. Signed-off-by: Gary Kattan <gary.kattan@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: Add DP YCbCr 4:2:0 supportEric Bernstein
[Why] For supporting DP YCbCr 4:2:0 output. [How] Update mod_build_vsc_infopacket to support Pixel Encoding/Colorimetry Format indication for VSC SDP rev5. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: Build stream update and plane updates in dmBhawanpreet Lakha
[Why] We currently lock modeset by setting a boolean in dm. We want to lock Based on what DC tells us. [How] Build stream_updates and plane_update based on what changed. Then we call check_update_surfaces_for_stream() to get the update type We lock only if update_type is not fast Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/display: dc 3.1.64Tony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: manually map the shadow BOs againChristian König
Otherwise we won't be able to use the AGP aperture. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: use the AGP aperture for system memory access v2Christian König
Start to use the old AGP aperture for system memory access. v2: Move that to amdgpu_ttm_alloc_gart Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: add amdgpu_gmc_agp_location v3Christian König
Helper to figure out the location of the AGP BAR. v2: fix a couple of bugs v3: correctly add one to vram_end Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: correctly sign extend 48bit addresses v3Christian König
Correct sign extend the GMC addresses to 48bit. v2: sign extending turned out easier than thought. v3: clean up the defines and move them into amdgpu_gmc.h as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: improve VM state machine documentation v2Christian König
Since we have a lot of FAQ on the VM state machine try to improve the documentation by adding functions for each state move. v2: fix typo in amdgpu_vm_bo_invalidated, use amdgpu_vm_bo_relocated in one more place as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: fix amdgpu_mn_unlock() in the CS error pathChristian König
Avoid unlocking a lock we never locked. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: separate per VM BOs from normal in the moved stateChristian König
Allows us to avoid taking the spinlock in more places. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amdgpu: move size calculations to the front of the file againChristian König
amdgpu_vm_bo_* functions should come much later. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/powerplay: correct data type to support under voltageEvan Quan
For under voltage, negative value will be applied to voltage offset. Update the data type to cover this case. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-10drm/amd/powerplay: added vega20 overdrive support V3Evan Quan
Added vega20 overdrive support based on existing OD sysfs APIs. However, the OD logics are simplified on vega20. So, the behavior will be a little different and works only on some limited levels. V2: fix typo fix commit description revise error logs add support for clock OD V3: separate clock from voltage OD settings Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-11Merge tag 'drm-intel-next-2018-09-06-2' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Merge tag 'gvt-next-2018-09-04' drm-intel-next-2018-09-06-1: UAPI Changes: - GGTT coherency GETPARAM: GGTT has turned out to be non-coherent for some platforms, which we've failed to communicate to userspace so far. SNA was modified to do extra flushing on non-coherent GGTT access, while Mesa will mitigate by always requiring WC mapping (which is non-coherent anyway). - Neuter Resource Streamer uAPI: There never really were users for the feature, so neuter it while keeping the interface bits for compatibility. This is a long due item from past. Cross-subsystem Changes: - Backmerge of branch drm-next-4.19 for DP_DPCD_REV_14 changes Core Changes: - None Driver Changes: - A load of Icelake (ICL) enabling patches (Paulo, Manasi) - Enabled full PPGTT for IVB,VLV and HSW (Chris) - Bugzilla #107113: Distribute DDB based on display resolutions (Mahesh) - Bugzillas #100023,#107476,#94921: Support limited range DP displays (Jani) - Bugzilla #107503: Increase LSPCON timeout (Fredrik) - Avoid boosting GPU due to an occasional stall in interactive workloads (Chris) - Apply GGTT coherency W/A only for affected systems instead of all (Chris) - Fix for infinite link training loop for faulty USB-C MST hubs (Nathan) - Keep KMS functional on Gen4 and earlier when GPU is wedged (Chris) - Stop holding ppGTT reference from closed VMAs (Chris) - Clear error registers after error capture (Lionel) - Various Icelake fixes (Anusha, Jyoti, Ville, Tvrtko) - Add missing Coffeelake (CFL) PCI IDs (Rodrigo) - Flush execlists tasklet directly from reset-finish (Chris) - Fix LPE audio runtime PM (Chris) - Fix detection of out of range surface positions (GLK/CNL) (Ville) - Remove wait-for-idle for PSR2 (Dhinakaran) - Power down existing display hardware resources when display is disabled (Chris) - Don't allow runtime power management if RC6 doesn't exist (Chris) - Add debugging checks for runtime power management paths (Imre) - Increase symmetry in display power init/fini paths (Imre) - Isolate GVT specific macros from i915_reg.h (Lucas) - Increase symmetry in power management enable/disable paths (Chris) - Increase IP disable timeout to 100 ms to avoid DRM_ERROR (Imre) - Fix memory leak from HDMI HDCP write function (Brian, Rodrigo) - Reject Y/Yf tiling on interlaced modes (Ville) - Use a cached mapping for the physical HWS on older gens (Chris) - Force slow path of writing relocations to buffer if unable to write to userspace (Chris) - Do a full device reset after being wedged (Chris) - Keep forcewake counts over reset (in case of debugfs user) (Imre, Chris) - Avoid false-positive errors from power wells during init (Imre) - Reset engines forcibly in exchange of declaring whole device wedged (Mika) - Reduce context HW ID lifetime in preparation for Icelake (Chris) - Attempt to recover from module load failures (Chris) - Keep select interrupts over a reset to avoid missing/losing them (Chris) - GuC submission backend improvements (Jakub) - Terminate context images with BB_END (Chris, Lionel) - Make GCC evaluate GGTT view struct size assertions again (Ville) - Add selftest to exercise suspend/hibernate code-paths for GEM (Chris) - Use a full emulation of a user ppgtt context in selftests (Chris) - Exercise resetting in the middle of a wait-on-fence in selftests (Chris) - Fix coherency issues on selftests for Baytrail (Chris) - Various other GEM fixes / self-test updates (Chris, Matt) - GuC doorbell self-tests (Daniele) - PSR mode control through debugfs for IGTs (Maarten) - Degrade expected WM latency errors to DRM_DEBUG_KMS (Chris) - Cope with errors better in MST link training (Dhinakaran) - Fix WARN on KBL external displays (Azhar) - Power well code cleanups (Imre) - Fixes to PSR debugging (Dhinakaran) - Make forcewake errors louder for easier catching in CI (WARNs) (Chris) - Fortify tiling code against programmer errors (Chris) - Bunch of fixes for CI exposed corner cases (multiple authors, mostly Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907105446.GA22860@jlahtine-desk.ger.corp.intel.com
2018-09-10hexagon: modify ffs() and fls() to return intRandy Dunlap
Building drivers/mtd/nand/raw/nandsim.c on arch/hexagon/ produces a printk format build warning. This is due to hexagon's ffs() being coded as returning long instead of int. Fix the printk format warning by changing all of hexagon's ffs() and fls() functions to return int instead of long. The variables that they return are already int instead of long. This return type matches the return type in <asm-generic/bitops/>. ../drivers/mtd/nand/raw/nandsim.c: In function 'init_nandsim': ../drivers/mtd/nand/raw/nandsim.c:760:2: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'long int' [-Wformat] There are no ffs() or fls() allmodconfig build errors after making this change. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-hexagon@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Patch-mainline: linux-kernel @ 07/22/2018, 16:03 Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
2018-09-10arch/hexagon: fix kernel/dma.c build warningRandy Dunlap
Fix build warning in arch/hexagon/kernel/dma.c by casting a void * to unsigned long to match the function parameter type. ../arch/hexagon/kernel/dma.c: In function 'arch_dma_alloc': ../arch/hexagon/kernel/dma.c:51:5: warning: passing argument 2 of 'gen_pool_add' makes integer from pointer without a cast [enabled by default] ../include/linux/genalloc.h:112:19: note: expected 'long unsigned int' but argument is of type 'void *' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Patch-mainline: linux-kernel @ 07/20/2018, 20:17 [rkuo@codeaurora.org: fixed architecture name] Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
2018-09-11netfilter: xt_hashlimit: use s->file instead of s->privateCong Wang
After switching to the new procfs API, it is supposed to retrieve the private pointer from PDE_DATA(file_inode(s->file)), s->private is no longer referred. Fixes: 1cd671827290 ("netfilter/x_tables: switch to proc_create_seq_private") Reported-by: Sami Farin <hvtaifwkbgefbaei@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Christoph Hellwig <hch@lst.de> Tested-by: Sami Farin <hvtaifwkbgefbaei@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-09-11netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEATMichal 'vorner' Vaner
NF_REPEAT places the packet at the beginning of the iptables chain instead of accepting or rejecting it right away. The packet however will reach the end of the chain and continue to the end of iptables eventually, so it needs the same handling as NF_ACCEPT and NF_DROP. Fixes: 368982cd7d1b ("netfilter: nfnetlink_queue: resolve clash for unconfirmed conntracks") Signed-off-by: Michal 'vorner' Vaner <michal.vaner@avast.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-09-11netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to typePablo Neira Ayuso
Compiler did not catch incorrect typing in the rcu hook assignment. % nfct add timeout test-tcp inet tcp established 100 close 10 close_wait 10 % iptables -I OUTPUT -t raw -p tcp -j CT --timeout test-tcp dmesg - xt_CT: Timeout policy `test-tcp' can only be used by L3 protocol number 25000 The CT target bails out with incorrect layer 3 protocol number. Fixes: 6c1fd7dc489d ("netfilter: cttimeout: decouple timeout policy from nfnetlink_cttimeout object") Reported-by: Harsha Sharma <harshasharmaiitr@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-09-11netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUTPablo Neira Ayuso
Now that cttimeout support for nft_ct is in place, these should depend on CONFIG_NF_CONNTRACK_TIMEOUT otherwise we can crash when dumping the policy if this option is not enabled. [ 71.600121] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [...] [ 71.600141] CPU: 3 PID: 7612 Comm: nft Not tainted 4.18.0+ #246 [...] [ 71.600188] Call Trace: [ 71.600201] ? nft_ct_timeout_obj_dump+0xc6/0xf0 [nft_ct] Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-09-11netfilter: conntrack: reset tcp maxwin on re-registerFlorian Westphal
Doug Smythies says: Sometimes it is desirable to temporarily disable, or clear, the iptables rule set on a computer being controlled via a secure shell session (SSH). While unwise on an internet facing computer, I also do it often on non-internet accessible computers while testing. Recently, this has become problematic, with the SSH session being dropped upon re-load of the rule set. The problem is that when all rules are deleted, conntrack hooks get unregistered. In case the rules are re-added later, its possible that tcp window has moved far enough so that all packets are considered invalid (out of window) until entry expires (which can take forever, default established timeout is 5 days). Fix this by clearing maxwin of existing tcp connections on register. v2: don't touch entries on hook removal. v3: remove obsolete expiry check. Reported-by: Doug Smythies <dsmythies@telus.net> Fixes: 4d3a57f23dec59 ("netfilter: conntrack: do not enable connection tracking unless needed") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-09-10dm thin metadata: try to avoid ever aborting transactionsJoe Thornber
Committing a transaction can consume some metadata of it's own, we now reserve a small amount of metadata to cover this. Free metadata reported by the kernel will not include this reserve. If any of the reserve has been used after a commit we enter a new internal state PM_OUT_OF_METADATA_SPACE. This is reported as PM_READ_ONLY, so no userland changes are needed. If the metadata device is resized the pool will move back to PM_WRITE. These changes mean we never need to abort and rollback a transaction due to running out of metadata space. This is particularly important because there have been a handful of reports of data corruption against DM thin-provisioning that can all be attributed to the thin-pool having ran out of metadata space. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-09-10platform/x86: alienware-wmi: Correct a memory leakMario Limonciello
An ACPI buffer that was allocated was not being freed after use. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Cc: stable@vger.kernel.org Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-09-10platform/x86: dell-smbios-wmi: Correct a memory leakMario Limonciello
ACPI buffers were being allocated but never freed. Reported-by: Pinzhen Xu <pinzhen.xu@intel.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Cc: stable@vger.kernel.org Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-09-10drm: udl: Destroy framebuffer only if it was initializedEmil Lundmark
This fixes a NULL pointer dereference that can happen if the UDL driver is unloaded before the framebuffer is initialized. This can happen e.g. if the USB device is unplugged right after it was plugged in. As explained by Stéphane Marchesin: It happens when fbdev is disabled (which is the case for Chrome OS). Even though intialization of the fbdev part is optional (it's done in udlfb_create which is the callback for fb_probe()), the teardown isn't optional (udl_driver_unload -> udl_fbdev_cleanup -> udl_fbdev_destroy). Note that udl_fbdev_cleanup *tries* to be conditional (you can see it does if (!udl->fbdev)) but that doesn't work, because udl->fbdev is always set during udl_fbdev_init. Cc: stable@vger.kernel.org Suggested-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Emil Lundmark <lndmrk@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180528142711.142466-1-lndmrk@chromium.org Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-09-10drm/sun4i: Remove R40 display pipeline compatiblesChen-Yu Tsai
Two patches from the R40 display pipeline support series weren't applied with the rest of the series. When they did get applied, the -rc6 deadline for drm-misc-next had past, so they didn't get into 4.19-rc1 with the rest of the series. However, the two patches are crucial in the parsing of the R40's display pipeline graph in the device tree. Without them, the driver crashes because it can't follow the odd graph structure. This patch removes the R40 compatibles from the sun4i-drm driver, effectively disabling DRM support for the R40 for one release cycle. This will prevent the driver from crashing upon probing. The compatibles should be reinstated for the next release. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180827083950.602-1-wens@csie.org Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-09-10drm/pl111: Make sure of_device_id tables are NULL terminatedzhong jiang
We prefer to of_device_id tables are NULL terminated. So make vexpress_muxfpga_match is NULL terminated. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1533379767-15629-1-git-send-email-zhongjiang@huawei.com Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-09-10drm/vc4: Fix the "no scaling" case on multi-planar YUV formatsBoris Brezillon
When there's no scaling requested ->is_unity should be true no matter the format. Also, when no scaling is requested and we have a multi-planar YUV format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only set ->x_scaling[0] to VC4_SCALING_PPF. Doing this fixes an hardly visible artifact (seen when using modetest and a rather big overlay plane in YUV420). Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180725122907.13702-1-boris.brezillon@bootlin.com Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-09-10Merge tag 'gvt-fixes-2018-09-10' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi
drm-intel-fixes gvt-fixes-2018-09-10 - KVM mm access reference fix (Zhenyu) - Fix child device config length for virtual opregion (Weinan) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180910092212.GZ20737@zhen-hp.sh.intel.com
2018-09-10drm/i915/guc: Update GuC power domain statesMichal Wajdeczko
We should update GuC power domain states also when GuC submission is disabled, otherwise GuC might complain or ignore our requests. This seems to be required for all currently released GuC firmwares. v2: it is only needed by pre-Gen11 firmwares Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180910104150.101752-1-michal.wajdeczko@intel.com
2018-09-10Revert "cdc-acm: implement put_char() and flush_chars()"Oliver Neukum
This reverts commit a81cf9799ad7299b03a4dff020d9685f9ac5f3e0. The patch causes a regression, which I cannot find the reason for. So let's revert for now, as a revert hurts only performance. Original report: I was trying to resolve the problem with Oliver but we don't get any conclusion for 5 months, so I am now sending this to mail list and cdc_acm authors. I am using simple request-response protocol to obtain the boiller parameters in constant intervals. A simple one transaction is: 1. opening the /dev/ttyACM0 2. sending the following 10-bytes request to the device: unsigned char req[] = {0x02, 0xfe, 0x01, 0x05, 0x08, 0x02, 0x01, 0x69, 0xab, 0x03}; 3. reading response (frame of 74 bytes length). 4. closing the descriptor I am doing this transaction with 5 seconds intervals. Before the bad commit everything was working correctly: I've got a requests and a responses in a timely manner. After the bad commit more time I am using the kernel module, more problems I have. The graph [2] is showing the problem. As you can see after module load all seems fine but after about 30 minutes I've got a plenty of EAGAINs when doing read()'s and trying to read back the data. When I rmmod and insmod the cdc_acm module again, then the situation is starting over again: running ok shortly after load, and more time it is running, more EAGAINs I have when calling read(). As a bonus I can see the problem on the device itself: The device is configured as you can see here on this screen [3]. It has two transmision LEDs: TX and RX. Blink duration is set for 100ms. This is a recording before the bad commit when all is working fine: [4] And this is with the bad commit: [5] As you can see the TX led is blinking wrongly long (indicating transmission?) and I have problems doing read() calls (EAGAIN). Reported-by: Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: a81cf9799ad7 ("cdc-acm: implement put_char() and flush_chars()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10usb: Change usb_of_get_companion_dev() place to usb/commonYoshihiro Shimoda
Since renesas_usb3 udc driver calls usb_of_get_companion_dev() which is on usb/core/of.c, build error like below happens if we disable CONFIG_USB because the usb/core/ needs CONFIG_USB: ERROR: "usb_of_get_companion_dev" [drivers/usb/gadget/udc/renesas_usb3.ko] undefined! According to the usb/gadget/Kconfig, "NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!". So, to fix the issue, this patch changes the usb_of_get_companion_dev() place from usb/core/of.c to usb/common/common.c to be called by both host and gadget. Reported-by: John Garry <john.garry@huawei.com> Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10usb: xhci: fix interrupt transfer error happened on MTK platformsChunfeng Yun
The MTK xHCI controller use some reserved bytes in endpoint context for bandwidth scheduling, so need keep them in xhci_endpoint_copy(); The issue is introduced by: commit f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") It resets endpoints and will drop bandwidth scheduling parameters used by interrupt or isochronous endpoints on MTK xHCI controller. Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10qmi_wwan: Support dynamic config on Quectel EP06Kristian Evensen
Quectel EP06 (and EM06/EG06) supports dynamic configuration of USB interfaces, without the device changing VID/PID or configuration number. When the configuration is updated and interfaces are added/removed, the interface numbers change. This means that the current code for matching EP06 does not work. This patch removes the current EP06 interface number match, and replaces it with a match on class, subclass and protocol. Unfortunately, matching on those three alone is not enough, as the diag interface exports the same values as QMI. The other serial interfaces + adb export different values and do not match. The diag interface only has two endpoints, while the QMI interface has three. I have therefore added a check for number of interfaces, and we ignore the interface if the number of endpoints equals two. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10drm/i915/bdw: Increase IPS disable timeout to 100msImre Deak
During IPS disabling the current 42ms timeout value leads to occasional timeouts, increase it to 100ms which seems to get rid of the problem. References: https://bugs.freedesktop.org/show_bug.cgi?id=107494 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107562 Reported-by: Diego Viola <diego.viola@gmail.com> Tested-by: Diego Viola <diego.viola@gmail.com> Cc: Diego Viola <diego.viola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905100005.7663-1-imre.deak@intel.com (cherry picked from commit acb3ef0ee40ea657280a4a11d9f60eb2937c0dca) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-09-10ethernet: renesas: convert to SPDX identifiersKuninori Morimoto
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10staging: gasket: TODO: re-implement using UIOAhmed S. Darwish
The gasket in-kernel framework, recently introduced under staging, re-implements what is already long-time provided by the UIO subsystem, with extra PCI BAR remapping and MSI conveniences. Before moving it out of staging, make sure we add the new bits to the UIO framework instead, then transform its signle client, the Apex driver, to a proper UIO driver (uio_driver.h). Link: https://lkml.kernel.org/r/20180828103817.GB1397@do-kernel Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10tty: hvc: hvc_write() fix break conditionNicholas Piggin
Commit 550ddadcc758 ("tty: hvc: hvc_write() may sleep") broke the termination condition in case the driver stops accepting characters. This can result in unnecessary polling of the busy driver. Restore it by testing the hvc_push return code. Tested-by: Matteo Croce <mcroce@redhat.com> Tested-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10tty: hvc: hvc_poll() fix read loop batchingNicholas Piggin
Commit ec97eaad1383 ("tty: hvc: hvc_poll() break hv read loop") removes get_chars batching entirely, which slows down large console operations like paste -- virtio console "feels worse than a 9600 baud serial line," reports Matteo. This adds back batching in a more latency friendly way. If the caller can sleep then we try to fill the entire flip buffer, releasing the lock and scheduling between each iteration. If it can not sleep, then batches are limited to 128 bytes. Matteo confirms this fixes the performance problem. Latency testing the powerpc OPAL console with OpenBMC UART with a large paste shows about 0.25ms latency, which seems reasonable. 10ms latencies were typical for this case before the latency breaking work, so we still see most of the benefit. kopald-1204 0d.h. 5us : hvc_poll <-hvc_handle_interrupt kopald-1204 0d.h. 5us : __hvc_poll <-hvc_handle_interrupt kopald-1204 0d.h. 5us : _raw_spin_lock_irqsave <-__hvc_poll kopald-1204 0d.h. 5us : tty_port_tty_get <-__hvc_poll kopald-1204 0d.h. 6us : _raw_spin_lock_irqsave <-tty_port_tty_get kopald-1204 0d.h. 6us : _raw_spin_unlock_irqrestore <-tty_port_tty_get kopald-1204 0d.h. 6us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 7us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 7us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 36us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 36us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 36us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 65us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 65us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 66us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 94us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 95us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 95us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 124us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 124us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 125us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 154us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 154us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 154us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 183us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 184us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 184us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 213us : tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 213us : __tty_buffer_request_room <-__hvc_poll kopald-1204 0d.h. 213us+: opal_get_chars <-__hvc_poll kopald-1204 0d.h. 242us : _raw_spin_unlock_irqrestore <-__hvc_poll kopald-1204 0d.h. 242us : tty_flip_buffer_push <-__hvc_poll kopald-1204 0d.h. 243us : queue_work_on <-tty_flip_buffer_push kopald-1204 0d.h. 243us : tty_kref_put <-__hvc_poll kopald-1204 0d.h. 243us : hvc_kick <-hvc_handle_interrupt kopald-1204 0d.h. 243us : wake_up_process <-hvc_kick kopald-1204 0d.h. 244us : try_to_wake_up <-hvc_kick kopald-1204 0d.h. 244us : _raw_spin_lock_irqsave <-try_to_wake_up kopald-1204 0d.h. 244us : _raw_spin_unlock_irqrestore <-try_to_wake_up Reported-by: Matteo Croce <mcroce@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Tested-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10tty: hvc: hvc_poll() fix read loop hangNicholas Piggin
Commit ec97eaad1383 ("tty: hvc: hvc_poll() break hv read loop") causes the virtio console to hang at times (e.g., if you paste a bunch of characters to it. The reason is that get_chars must return 0 before we can be sure the driver will kick or poll input again, but this change only scheduled a poll if get_chars had returned a full count. Change this to poll on any > 0 count. Reported-by: Matteo Croce <mcroce@redhat.com> Reported-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Matteo Croce <mcroce@redhat.com> Tested-by: Jason Gunthorpe <jgg@mellanox.com> Tested-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10mfd: da9063: Fix DT probing with constraintsPhilipp Zabel
Commit 1c892e38ce59 ("regulator: da9063: Handle less LDOs on DA9063L") reordered the da9063_regulator_info[] array, but not the DA9063_ID_* regulator ids and not the da9063_matches[] array, because ids are used as indices in the array initializer. This mismatch between regulator id and da9063_regulator_info[] array index causes the driver probe to fail because constraints from DT are not applied to the correct regulator: da9063 0-0058: Device detected (chip-ID: 0x61, var-ID: 0x50) DA9063_BMEM: Bringing 900000uV into 3300000-3300000uV DA9063_LDO9: Bringing 3300000uV into 2500000-2500000uV DA9063_LDO1: Bringing 900000uV into 3300000-3300000uV DA9063_LDO1: failed to apply 3300000-3300000uV constraint(-22) This patch reorders the DA9063_ID_* as apparently intended, and with them the entries in the da90630_matches[] array. Fixes: 1c892e38ce59 ("regulator: da9063: Handle less LDOs on DA9063L") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-09-10ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFOWilly Tarreau
snd_emu10k1_fx8010_ioctl(SNDRV_EMU10K1_IOCTL_INFO) allocates memory using kmalloc() and partially fills it by calling snd_emu10k1_fx8010_info() before returning the resulting structure to userspace, leaving uninitialized holes. Let's just use kzalloc() here. BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html Signed-off-by: Willy Tarreau <w@1wt.eu> Cc: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-13 05:59:18 +0000