summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-09-06printk/tracing: Do not trace printk_nmi_enter()Steven Rostedt (VMware)
I hit the following splat in my tests: ------------[ cut here ]------------ IRQs not enabled as expected WARNING: CPU: 3 PID: 0 at kernel/time/tick-sched.c:982 tick_nohz_idle_enter+0x44/0x8c Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6table_filter ip6_tables ipv6 CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.0-rc2-test+ #2 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 EIP: tick_nohz_idle_enter+0x44/0x8c Code: ec 05 00 00 00 75 26 83 b8 c0 05 00 00 00 75 1d 80 3d d0 36 3e c1 00 75 14 68 94 63 12 c1 c6 05 d0 36 3e c1 01 e8 04 ee f8 ff <0f> 0b 58 fa bb a0 e5 66 c1 e8 25 0f 04 00 64 03 1d 28 31 52 c1 8b EAX: 0000001c EBX: f26e7f8c ECX: 00000006 EDX: 00000007 ESI: f26dd1c0 EDI: 00000000 EBP: f26e7f40 ESP: f26e7f38 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010296 CR0: 80050033 CR2: 0813c6b0 CR3: 2f342000 CR4: 001406f0 Call Trace: do_idle+0x33/0x202 cpu_startup_entry+0x61/0x63 start_secondary+0x18e/0x1ed startup_32_smp+0x164/0x168 irq event stamp: 18773830 hardirqs last enabled at (18773829): [<c040150c>] trace_hardirqs_on_thunk+0xc/0x10 hardirqs last disabled at (18773830): [<c040151c>] trace_hardirqs_off_thunk+0xc/0x10 softirqs last enabled at (18773824): [<c0ddaa6f>] __do_softirq+0x25f/0x2bf softirqs last disabled at (18773767): [<c0416bbe>] call_on_stack+0x45/0x4b ---[ end trace b7c64aa79e17954a ]--- After a bit of debugging, I found what was happening. This would trigger when performing "perf" with a high NMI interrupt rate, while enabling and disabling function tracer. Ftrace uses breakpoints to convert the nops at the start of functions to calls to the function trampolines. The breakpoint traps disable interrupts and this makes calls into lockdep via the trace_hardirqs_off_thunk in the entry.S code. What happens is the following: do_idle { [interrupts enabled] <interrupt> [interrupts disabled] TRACE_IRQS_OFF [lockdep says irqs off] [...] TRACE_IRQS_IRET test if pt_regs say return to interrupts enabled [yes] TRACE_IRQS_ON [lockdep says irqs are on] <nmi> nmi_enter() { printk_nmi_enter() [traced by ftrace] [ hit ftrace breakpoint ] <breakpoint exception> TRACE_IRQS_OFF [lockdep says irqs off] [...] TRACE_IRQS_IRET [return from breakpoint] test if pt_regs say interrupts enabled [no] [iret back to interrupt] [iret back to code] tick_nohz_idle_enter() { lockdep_assert_irqs_enabled() [lockdep say no!] Although interrupts are indeed enabled, lockdep thinks it is not, and since we now do asserts via lockdep, it gives a false warning. The issue here is that printk_nmi_enter() is called before lockdep_off(), which disables lockdep (for this reason) in NMIs. By simply not allowing ftrace to see printk_nmi_enter() (via notrace annotation) we keep lockdep from getting confused. Cc: stable@vger.kernel.org Fixes: 42a0bb3f71383 ("printk/nmi: generic solution for safe printk in NMI") Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-09-06Merge tag 'mlx5e-fixes-2018-09-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-09-05 This pull request contains some fixes for mlx5 etherent netdevice and core driver. Please pull and let me know if there's any problem. For -stable v4.9: ('net/mlx5: Fix debugfs cleanup in the device init/remove flow') For -stable v4.12: ("net/mlx5: E-Switch, Fix memory leak when creating switchdev mode FDB tables") For -stable v4.13: ("net/mlx5: Fix use-after-free in self-healing flow") For -stable v4.14: ("net/mlx5: Check for error in mlx5_attach_interface") For -stable v4.15: ("net/mlx5: Fix not releasing read lock when adding flow rules") For -stable v4.17: ("net/mlx5: Fix possible deadlock from lockdep when adding fte to fg") For -stable v4.18: ("net/mlx5: Use u16 for Work Queue buffer fragment size") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06HID: i2c-hid: Don't reset device upon system resumeKai-Heng Feng
Raydium touchscreen triggers interrupt storm after system-wide suspend: [ 179.085033] i2c_hid i2c-CUST0000:00: i2c_hid_get_input: incomplete report (58/65535) According to Raydium, Windows driver does not reset the device after system resume. The HID over I2C spec does specify a reset should be used at intialization, but it doesn't specify if reset is required for system suspend. Tested this patch on other i2c-hid touchpanels I have and those touchpanels do work after S3 without doing reset. If any regression happens to other touchpanel vendors, we can use quirk for Raydium devices. There's still one device uses I2C_HID_QUIRK_RESEND_REPORT_DESCR so keep it there. Cc: Aaron Ma <aaron.ma@canonical.com> Cc: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-09-06rbd: support cloning across namespacesIlya Dryomov
If parent_get class method is not supported by the OSDs, fall back to the legacy class method and assume that the parent is in the default (i.e. "") namespace. The "use the child's image namespace" workaround is no longer needed because creating images within namespaces will require parent_get aware OSDs. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2018-09-06rbd: factor out get_parent_info()Ilya Dryomov
In preparation for the new parent_get and parent_overlap_get class methods, factor out the fetching and decoding of parent data. As a side effect, we now decode all four fields in the "no parent" case. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2018-09-06ceph: avoid a use-after-free in ceph_destroy_options()Ilya Dryomov
syzbot reported a use-after-free in ceph_destroy_options(), called from ceph_mount(). The problem was that create_fs_client() consumed the opt pointer on some errors, but not on all of them. Make sure it always consumes both libceph and ceph options. Reported-by: syzbot+8ab6f1042021b4eed062@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-09-06drm/i915: Update DRIVER_DATE to 20180906Joonas Lahtinen
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-09-06Merge tag 'gvt-next-2018-09-04' of https://github.com/intel/gvt-linux into ↵Joonas Lahtinen
drm-intel-next-queued gvt-next-2018-09-04 - guest context shadow optimization for restore inhibit one (Yan) - cmd parser optimization (Yan) - W=1 warning fixes (Zhenyu) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> # Conflicts: # drivers/gpu/drm/i915/gvt/reg.h From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904030154.GG20737@zhen-hp.sh.intel.com
2018-09-06drm/i915: Update DRIVER_DATE to 20180906Joonas Lahtinen
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-09-06cpu/hotplug: Prevent state corruption on error rollbackThomas Gleixner
When a teardown callback fails, the CPU hotplug code brings the CPU back to the previous state. The previous state becomes the new target state. The rollback happens in undo_cpu_down() which increments the state unconditionally even if the state is already the same as the target. As a consequence the next CPU hotplug operation will start at the wrong state. This is easily to observe when __cpu_disable() fails. Prevent the unconditional undo by checking the state vs. target before incrementing state and fix up the consequently wrong conditional in the unplug code which handles the failure of the final CPU take down on the control CPU side. Fixes: 4dddfb5faa61 ("smp/hotplug: Rewrite AP state machine core") Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: josh@joshtriplett.org Cc: peterz@infradead.org Cc: jiangshanlai@gmail.com Cc: dzickus@redhat.com Cc: brendan.jackman@arm.com Cc: malat@debian.org Cc: sramana@codeaurora.org Cc: linux-arm-msm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1809051419580.1416@nanos.tec.linutronix.de ----
2018-09-06cpu/hotplug: Adjust misplaced smb() in cpuhp_thread_fun()Neeraj Upadhyay
The smp_mb() in cpuhp_thread_fun() is misplaced. It needs to be after the load of st->should_run to prevent reordering of the later load/stores w.r.t. the load of st->should_run. Fixes: 4dddfb5faa61 ("smp/hotplug: Rewrite AP state machine core") Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infraded.org> Cc: josh@joshtriplett.org Cc: peterz@infradead.org Cc: jiangshanlai@gmail.com Cc: dzickus@redhat.com Cc: brendan.jackman@arm.com Cc: malat@debian.org Cc: mojha@codeaurora.org Cc: sramana@codeaurora.org Cc: linux-arm-msm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1536126727-11629-1-git-send-email-neeraju@codeaurora.org
2018-09-06x86/process: Don't mix user/kernel regs in 64bit __show_regs()Jann Horn
When the kernel.print-fatal-signals sysctl has been enabled, a simple userspace crash will cause the kernel to write a crash dump that contains, among other things, the kernel gsbase into dmesg. As suggested by Andy, limit output to pt_regs, FS_BASE and KERNEL_GS_BASE in this case. This also moves the bitness-specific logic from show_regs() into process_{32,64}.c. Fixes: 45807a1df9f5 ("vdso: print fatal signals") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180831194151.123586-1-jannh@google.com
2018-09-06x86/tsc: Prevent result truncation on 32bitChuanhua Lei
Loops per jiffy is calculated by multiplying tsc_khz with 1e3 and then dividing it by HZ. Both tsc_khz and the temporary variable holding the multiplication result are of type unsigned long, so on 32bit the result is truncated to the lower 32bit. Use u64 as type for the temporary variable and cast tsc_khz to it before multiplying. [ tglx: Massaged changelog and removed pointless braces ] Fixes: cf7a63ef4e02 ("x86/tsc: Calibrate tsc only once") Signed-off-by: Chuanhua Lei <chuanhua.lei@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: yixin.zhu@linux.intel.com Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Tatashin <pasha.tatashin@microsoft.com> Cc: Rajvi Jingar <rajvi.jingar@intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Link: https://lkml.kernel.org/r/1536228203-18701-1-git-send-email-chuanhua.lei@linux.intel.com
2018-09-06drm/i915: Update DRIVER_DATE to 20180906Joonas Lahtinen
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-09-06ACPI / LPSS: Force LPSS quirks on bootZhang Rui
Commit 12864ff8545f (ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation) bypasses lpss quirks for S3 and S4, by setting a flag for S3/S4 in acpi_lpss_suspend(), and check that flag in acpi_lpss_resume(). But this overlooks the boot case where acpi_lpss_resume() may get called without a corresponding acpi_lpss_suspend() having been called. Thus force setting the flag during boot. Fixes: 12864ff8545f (ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation) Link: https://bugzilla.kernel.org/show_bug.cgi?id=200989 Reported-and-tested-by: William Lieurance <william.lieurance@namikoda.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: 4.15+ <stable@vger.kernel.org> # 4.15+: 12864ff8545f (ACPI / LPSS: Avoid ...) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-09-06ACPI / bus: Only call dmi_check_system() on X86Jean Delvare
Calling dmi_check_system() early only works on X86. Other architectures initialize the DMI subsystem later so it's not ready yet when ACPI itself gets initialized. In the best case it results in a useless call to a function which will do nothing. But depending on the dmi implementation, it could also result in warnings. Best is to not call the function when it can't work and isn't needed. Additionally, if anyone ever needs to add non-x86 quirks, it would surprisingly not work, so document the limitation to avoid confusion. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: cce4f632db20 (ACPI: fix early DSDT dmi check warnings on ia64) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-09-06ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFERKuninori Morimoto
Current rsnd driver will fallback to PIO mode if it can't get DMA handler. But, DMA might return -EPROBE_DEFER when probe timing. This driver always fallback to PIO mode especially from commit ac6bbf0cdf4206c ("iommu: Remove IOMMU_OF_DECLARE") because of this reason. The DMA driver will be probed later, but sound driver might be probed as PIO mode in such case. This patch fixup this issue. Then, -EPROBE_DEFER is not error. Thus, let's don't indicate error message in such case. And it needs to call rsnd_adg_remove() individually if probe failed, because it registers clk which should be unregister. Maybe PIO fallback feature itself is not needed, but let's keep it so far. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-06ASoC: rsnd: adg: care clock-frequency sizeKuninori Morimoto
ADG has buffer over flow bug if DT has more than 3 clock-frequency. This patch fixup this issue, and uses first 2 values. clock-frequency = <x y>; /* this is OK */ clock-frequency = <x y z>; /* this is NG */ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-06Merge tag 'fixes-for-v4.19-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.19-rc2 NET2280 got a fix to an old patch attempting to fix locking for gadget framework callbacks. DWC2 fixed a bug where driver was attempting to access registers before clocks were enabled. DWC3 got a fix for ULPI clock configuration on Baytrail devices. FOTG210 plugged a memory leak and Renesas USB3 fixed ep0 maxpacket size.
2018-09-06drm: expand replace_fence to support timeline point v2Chunming Zhou
we can place a fence to a timeline point after expanded. v2: change func parameter order Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246543/
2018-09-06drm: expand drm_syncobj_find_fence to support timeline point v2Chunming Zhou
we can fetch timeline point fence after expanded. v2: The parameter fence is the result of the function and should come last. Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246541/
2018-09-06drm: rename null fence to stub fence in syncobj v2Chunming Zhou
moved to front of file. stub fence will be used by timeline syncobj as well. Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246539/
2018-09-06drm: fix syncobj null_fence_enable_signalingChunming Zhou
That is certainly totally nonsense. dma_fence_enable_sw_signaling() is the function who is calling this callback. Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/246535/
2018-09-06drm: Reject unknown legacy bpp and depth for drm_mode_addfb ioctlChris Wilson
Since this is handling user provided bpp and depth, we need to sanity check and propagate the EINVAL back rather than assume what the insane client intended and fill the logs with DRM_ERROR. v2: Check both bpp and depth match the builtin pixel format, and introduce a canonical DRM_FORMAT_INVALID to reserve 0 against any future fourcc. v3: Mark up DRM_FORMAT_C8 as being {bpp:8, depth:8} Testcase: igt/kms_addfb_basic/legacy-format Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180905153116.28924-1-chris@chris-wilson.co.uk
2018-09-06drm: fix drm_mode_addfb() on big endian machines.Gerd Hoffmann
Userspace on big endian machhines typically expects the ADDFB ioctl returns a big endian framebuffer. drm_mode_addfb() will call drm_mode_addfb2() unconditionally with little endian DRM_FORMAT_* values though, which is wrong. This patch fixes that. Drivers (both kernel and xorg) have quirks in place to deal with the broken drm_mode_addfb() behavior. Because of this we can't just change drm_mode_addfb() behavior for everybody without breaking things. Add the quirk_addfb_prefer_host_byte_order field to mode_config, so drivers can opt-in. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-5-kraxel@redhat.com
2018-09-06drm: do not mask out DRM_FORMAT_BIG_ENDIANGerd Hoffmann
framebuffer_check() expects that drm_get_format_info() will not fail if the __drm_format_info() call was successful. That'll work only in case both are called with the same pixel_format value, so masking out the DRM_FORMAT_BIG_ENDIAN flag isn't a good idea. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-4-kraxel@redhat.com
2018-09-06drm: byteorder: add DRM_FORMAT_HOST_*Gerd Hoffmann
Add fourcc variants in host byte order. With these at hand we don't need #ifdefs in drivers which support framebuffers in cpu endianess. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-3-kraxel@redhat.com
2018-09-06drm: replace DRIVER_PREFER_XBGR_30BPP driver flag with mode_config quirkGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-2-kraxel@redhat.com
2018-09-05Merge branch 'iucv-fixes'David S. Miller
Julian Wiedmann says: ==================== net/iucv: fixes 2018-09-05 please apply three straight-forward fixes for iucv. One that prevents leaking the skb on malformed inbound packets, one to fix the error handling on transmit error, and one to get rid of a compile warning. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05net/iucv: declare iucv_path_table_empty() as staticJulian Wiedmann
Fixes a compile warning. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05net/af_iucv: fix skb handling on HiperTransport xmit errorJulian Wiedmann
When sending an skb, afiucv_hs_send() bails out on various error conditions. But currently the caller has no way of telling whether the skb was freed or not - resulting in potentially either a) leaked skbs from iucv_send_ctrl(), or b) double-free's from iucv_sock_sendmsg(). As dev_queue_xmit() will always consume the skb (even on error), be consistent and also free the skb from all other error paths. This way callers no longer need to care about managing the skb. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05net/af_iucv: drop inbound packets with invalid flagsJulian Wiedmann
Inbound packets may have any combination of flag bits set in their iucv header. If we don't know how to handle a specific combination, drop the skb instead of leaking it. To clarify what error is returned in this case, replace the hard-coded 0 with the corresponding macro. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05net/sched: fix memory leak in act_tunnel_key_init()Davide Caratti
If users try to install act_tunnel_key 'set' rules with duplicate values of 'index', the tunnel metadata are allocated, but never released. Then, kmemleak complains as follows: # tc a a a tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 index 111 # echo clear > /sys/kernel/debug/kmemleak # tc a a a tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 index 111 Error: TC IDR already exists. We have an error talking to the kernel # echo scan > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8800574e6c80 (size 256): comm "tc", pid 5617, jiffies 4298118009 (age 57.990s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 1c e8 b0 ff ff ff ff ................ 81 24 c2 ad ff ff ff ff 00 00 00 00 00 00 00 00 .$.............. backtrace: [<00000000b7afbf4e>] tunnel_key_init+0x8a5/0x1800 [act_tunnel_key] [<000000007d98fccd>] tcf_action_init_1+0x698/0xac0 [<0000000099b8f7cc>] tcf_action_init+0x15c/0x590 [<00000000dc60eebe>] tc_ctl_action+0x336/0x5c2 [<000000002f5a2f7d>] rtnetlink_rcv_msg+0x357/0x8e0 [<000000000bfe7575>] netlink_rcv_skb+0x124/0x350 [<00000000edab656f>] netlink_unicast+0x40f/0x5d0 [<00000000b322cdcb>] netlink_sendmsg+0x6e8/0xba0 [<0000000063d9d490>] sock_sendmsg+0xb3/0xf0 [<00000000f0d3315a>] ___sys_sendmsg+0x654/0x960 [<00000000c06cbd42>] __sys_sendmsg+0xd3/0x170 [<00000000ce72e4b0>] do_syscall_64+0xa5/0x470 [<000000005caa2d97>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000fac1b476>] 0xffffffffffffffff This problem theoretically happens also in case users attempt to setup a geneve rule having wrong configuration data, or when the kernel fails to allocate 'params_new'. Ensure that tunnel_key_init() releases the tunnel metadata also in the above conditions. Addresses-Coverity-ID: 1373974 ("Resource leak") Fixes: d0f6dd8a914f4 ("net/sched: Introduce act_tunnel_key") Fixes: 0ed5269f9e41f ("net/sched: add tunnel option support to act_tunnel_key") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05tipc: orphan sock in tipc_release()Cong Wang
Before we unlock the sock in tipc_release(), we have to detach sk->sk_socket from sk, otherwise a parallel tipc_sk_fill_sock_diag() could stil read it after we free this socket. Fixes: c30b70deb5f4 ("tipc: implement socket diagnostics for AF_TIPC") Reported-and-tested-by: syzbot+48804b87c16588ad491d@syzkaller.appspotmail.com Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06drm/i915/gvt: Fix the incorrect length of child_device_config issueWeinan Li
GVT-g emualte the opregion for guest with bdb version as '186' which child_device_config length should be '33'. v2: split into 2 patch. 1st for issue fix, 2nd for code clean up.(Zhenyu) v3: add fixes tag.(Zhenyu) Fixes: 4023f301d28f ("drm/i915/gvt: opregion virtualization for win") CC: Xiaolin Zhang <xiaolin.zhang@intel.com> Reviewed-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-09-05net/mlx5: Fix possible deadlock from lockdep when adding fte to fgRoi Dayan
This is a false positive report due to incorrect nested lock annotations as we lock multiple fgs with the same subclass. Instead of locking all fgs only lock the one being used as was done before. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-05net/mlx5e: Ethtool steering, fix udp source port valueSaeed Mahameed
Copy and paste bug was introduced in the offending patch. We need to write udp source port value into the headers value and not headers criteria "mask". Fixes: 142644f8a1f8 ("net/mlx5e: Ethtool steering flow parsing refactoring") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-05net/mlx5: Check for error in mlx5_attach_interfaceHuy Nguyen
Currently, mlx5_attach_interface does not check for error after calling intf->attach or intf->add. When these two calls fails, the client is not initialized and will cause issues such as kernel panic on invalid address in the teardown path (mlx5_detach_interface) Fixes: 737a234bb638 ("net/mlx5: Introduce attach/detach to interface API") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-05net/mlx5: Consider PCI domain in search for next devDaniel Jurgens
The PCI BDF is not unique. PCI domain must also be considered when searching for the next physical device during lag setup. Example below: mlx5_core 0000:01:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0) mlx5_core 0000:01:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0) mlx5_core 0001:01:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0) mlx5_core 0001:01:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0) Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-05net/mlx5: Fix not releasing read lock when adding flow rulesRoi Dayan
If building match list fg fails and we never jumped to search_again_locked label then the function returned without unlocking the read lock. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-05net/mlx5: E-Switch, Fix memory leak when creating switchdev mode FDB tablesRaed Salem
The memory allocated for the slow path table flow group input structure was not freed upon successful return, fix that. Fixes: 1967ce6ea5c8 ("net/mlx5: E-Switch, Refactor fast path FDB table creation in switchdev mode") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-05net/mlx5: Use u16 for Work Queue buffer strides offsetTariq Toukan
Minimal stride size is 16. Hence, the number of strides in a fragment (of PAGE_SIZE) is <= PAGE_SIZE / 16 <= 4K. u16 is sufficient to represent this. Fixes: d7037ad73daa ("net/mlx5: Fix QP fragmented buffer allocation") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-05net/mlx5: Use u16 for Work Queue buffer fragment sizeTariq Toukan
Minimal stride size is 16. Hence, the number of strides in a fragment (of PAGE_SIZE) is <= PAGE_SIZE / 16 <= 4K. u16 is sufficient to represent this. Fixes: 388ca8be0037 ("IB/mlx5: Implement fragmented completion queue (CQ)") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-05net/mlx5: Fix debugfs cleanup in the device init/remove flowJack Morgenstein
When initializing the device (procedure init_one), the driver calls mlx5_pci_init to perform pci initialization. As part of this initialization, mlx5_pci_init creates a debugfs directory. If this creation fails, init_one aborts, returning failure to the caller (which is the probe method caller). The main reason for such a failure to occur is if the debugfs directory already exists. This can happen if the last time mlx5_pci_close was called, debugfs_remove (silently) failed due to the debugfs directory not being empty. Guarantee that such a debugfs_remove failure will not occur by instead calling debugfs_remove_recursive in procedure mlx5_pci_close. Fixes: 59211bd3b632 ("net/mlx5: Split the load/unload flow into hardware and software flows") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-05net/mlx5: Fix use-after-free in self-healing flowJack Morgenstein
When the mlx5 health mechanism detects a problem while the driver is in the middle of init_one or remove_one, the driver needs to prevent the health mechanism from scheduling future work; if future work is scheduled, there is a problem with use-after-free: the system WQ tries to run the work item (which has been freed) at the scheduled future time. Prevent this by disabling work item scheduling in the health mechanism when the driver is in the middle of init_one() or remove_one(). Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-09-05RDMA/uverbs: Fix error cleanup path of ib_uverbs_add_one()Parav Pandit
If ib_uverbs_create_uapi() fails, dev_num should be freed from the bitmap. Fixes: 7d96c9b17636 ("IB/uverbs: Have the core code create the uverbs_root_spec") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-05block: don't warn when doing fsync on read-only devicesMikulas Patocka
It is possible to call fsync on a read-only handle (for example, fsck.ext2 does it when doing read-only check), and this call results in kernel warning. The patch b089cfd95d32 ("block: don't warn for flush on read-only device") attempted to disable the warning, but it is buggy and it doesn't (op_is_flush tests flags, but bio_op strips off the flags). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 721c7fc701c7 ("block: fail op_is_write() requests to read-only partitions") Cc: stable@vger.kernel.org # 4.18 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-05bnxt_re: Fix couple of memory leaks that could lead to IOMMU call tracesSomnath Kotur
1. DMA-able memory allocated for Shadow QP was not being freed. 2. bnxt_qplib_alloc_qp_hdr_buf() had a bug wherein the SQ pointer was erroneously pointing to the RQ. But since the corresponding free_qp_hdr_buf() was correct, memory being free was less than what was allocated. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-05hwmon: (nct6775) Set weight source to zero correctlyDan Carpenter
This is dead code because j can never be 1 at this point. We had intended to just test if the bit was clear. Fixes: bbd8decd4123 ("hwmon: (nct6775) Add support for weighted fan control") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-09-05IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handlerAaron Knister
Inside of start_xmit() the call to check if the connection is up and the queueing of the packets for later transmission is not atomic which leaves a window where cm_rep_handler can run, set the connection up, dequeue pending packets and leave the subsequently queued packets by start_xmit() sitting on neigh->queue until they're dropped when the connection is torn down. This only applies to connected mode. These dropped packets can really upset TCP, for example, and cause multi-minute delays in transmission for open connections. Here's the code in start_xmit where we check to see if the connection is up: if (ipoib_cm_get(neigh)) { if (ipoib_cm_up(neigh)) { ipoib_cm_send(dev, skb, ipoib_cm_get(neigh)); goto unref; } } The race occurs if cm_rep_handler execution occurs after the above connection check (specifically if it gets to the point where it acquires priv->lock to dequeue pending skb's) but before the below code snippet in start_xmit where packets are queued. if (skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE) { push_pseudo_header(skb, phdr->hwaddr); spin_lock_irqsave(&priv->lock, flags); __skb_queue_tail(&neigh->queue, skb); spin_unlock_irqrestore(&priv->lock, flags); } else { ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); } The patch acquires the netif tx lock in cm_rep_handler for the section where it sets the connection up and dequeues and retransmits deferred skb's. Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support") Cc: stable@vger.kernel.org Signed-off-by: Aaron Knister <aaron.s.knister@nasa.gov> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-13 19:58:00 +0000