| Age | Commit message (Collapse) | Author |
|---|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pcmcia-2.6:
pcmcia: document return value of pcmcia_loop_config
pcmcia: dtl1_cs: fix pcmcia_loop_config logic
pcmcia: drop non-existant includes
pcmcia: disable prefetch/burst for OZ6933
pcmcia: fix incorrect argument order to list_add_tail()
pcmcia: drivers/pcmcia/pcmcia_resource.c: Remove unnecessary semicolons
pcmcia: Use phys_addr_t for physical addresses
pcmcia: drivers/pcmcia: Make static
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (75 commits)
PCI hotplug: clean up acpi_run_hpp()
PCI hotplug: acpiphp: use generic pci_configure_slot()
PCI hotplug: shpchp: use generic pci_configure_slot()
PCI hotplug: pciehp: use generic pci_configure_slot()
PCI hotplug: add pci_configure_slot()
PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface
PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridge
PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluation
PCI: Clear saved_state after the state has been restored
PCI PM: Return error codes from pci_pm_resume()
PCI: use dev_printk in quirk messages
PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset()
PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle
PCI Hotplug: acpiphp: find bridges the easy way
PCI: pcie portdrv: remove unused variable
PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support
ACPI PM: Replace wakeup.prepared with reference counter
PCI PM: Introduce device flag wakeup_prepared
PCI / ACPI PM: Rework some debug messages
PCI PM: Simplify PCI wake-up code
...
Fixed up conflict in arch/powerpc/kernel/pci_64.c due to OF device tree
scanning having been moved and merged for the 32- and 64-bit cases. The
'needs_freset' initialization added in 6e19314cc ("PCI/powerpc: support
PCIe fundamental reset") is now in arch/powerpc/kernel/pci_of_scan.c.
|
|
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: fix linkage problem with blk_iopoll and !CONFIG_BLOCK
|
|
* 'writeback' of git://git.kernel.dk/linux-2.6-block:
writeback: fix possible bdi writeback refcounting problem
writeback: Fix bdi use after free in wb_work_complete()
writeback: improve scalability of bdi writeback work queues
writeback: remove smp_mb(), it's not needed with list_add_tail_rcu()
writeback: use schedule_timeout_interruptible()
writeback: add comments to bdi_work structure
writeback: splice dirty inode entries to default bdi on bdi_destroy()
writeback: separate starting of sync vs opportunistic writeback
writeback: inline allocation failure handling in bdi_alloc_queue_work()
writeback: use RCU to protect bdi_list
writeback: only use bdi_writeback_all() for WB_SYNC_NONE writeout
fs: Assign bdi in super_block
writeback: make wb_writeback() take an argument structure
writeback: merely wakeup flusher thread if work allocation fails for WB_SYNC_NONE
writeback: get rid of wbc->for_writepages
fs: remove bdev->bd_inode_backing_dev_info
|
|
Sysbench thinks SD_BALANCE_WAKE is too agressive and kbuild doesn't
really mind too much, SD_BALANCE_NEWIDLE picks up most of the
slack.
On a dual socket, quad core, dual thread nehalem system:
sysbench (--num_threads=16):
SD_BALANCE_WAKE-: 13982 tx/s
SD_BALANCE_WAKE+: 15688 tx/s
kbuild (-j16):
SD_BALANCE_WAKE-: 47.648295846 seconds time elapsed ( +- 0.312% )
SD_BALANCE_WAKE+: 47.608607360 seconds time elapsed ( +- 0.026% )
(same within noise)
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
For consistencies sake, rename the argument (again).
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Clean up the code a little.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We don't need to call update_shares() for each domain we iterate,
just got the largets one.
However, we should call it before wake_affine() as well, so that
that can use up-to-date values too.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This prints a textual context-switching outline of workload
captured via perf sched record.
For example, on a 16 CPU box it outputs:
N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs
N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs
N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs
N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs
*L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs
L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs
L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089
L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs
*N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs
N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs
N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs
N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs
N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs
N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs
N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs
N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs
N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs
N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs
N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs
N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs
N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs
*N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs
*N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs
Columns stand for individual CPUs, from CPU0 to CPU15, and the
two-letter shortcuts stand for tasks that are running on a CPU.
'*' denotes the CPU that had the event.
A dot signals an idle CPU.
New tasks are assigned new two-letter shortcuts - when they occur
first they are printed. In the above example 'T1' stood for irqbalance:
T1 => irqbalance:2089
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
wb_clear_pending AFAIKS should not be called after the item has been
put on the list, except by the worker threads. It could lead to the
situation where the refcount is decremented below 0 and cause lots of
problems.
Presumably the !wb_has_dirty_io case is not a common one, so it can
be discovered when the thread wakes up to check?
Also add a comment in bdi_work_clear.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
By the time bdi_work_on_stack gets evaluated again in bdi_work_free, it
can already have been deallocated and used for something else in the
!on stack case, giving a false positive in this test and causing
corruption.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
If you're going to do an atomic RMW on each list entry, there's not much
point in all the RCU complexities of the list walking. This is only going
to help the multi-thread case I guess, but it doesn't hurt to do now.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
list_add_tail_rcu contains required barriers.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Gets rid of a manual set_current_state().
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
And document its retriever, get_next_work_item().
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
We cannot safely ensure that the inodes are all gone at this point
in time, and we must not destroy this bdi with inodes having off it.
So just splice our entries to the default bdi since that one will
always persist.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
bdi_start_writeback() is currently split into two paths, one for
WB_SYNC_NONE and one for WB_SYNC_ALL. Add bdi_sync_writeback()
for WB_SYNC_ALL writeback and let bdi_start_writeback() handle
only WB_SYNC_NONE.
Push down the writeback_control allocation and only accept the
parameters that make sense for each function. This cleans up
the API considerably.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This gets rid of work == NULL in bdi_queue_work() and puts the
OOM handling where it belongs.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Now that bdi_writeback_all() no longer handles integrity writeback,
it doesn't have to block anymore. This means that we can switch
bdi_list reader side protection to RCU.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Data integrity writeback must use bdi_start_writeback() and ensure
that wbc->sb and wbc->bdi are set.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
We do this automatically in get_sb_bdev() from the set_bdev_super()
callback. Filesystems that have their own private backing_dev_info
must assign that in ->fill_super().
Note that ->s_bdi assignment is required for proper writeback!
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
We need to be able to pass in range_cyclic as well, so instead
of growing yet another argument, split the arguments into a
struct wb_writeback_args structure that we can use internally.
Also makes it easier to just copy all members to an on-stack
struct, since we can't access work after clearing the pending
bit.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
WB_SYNC_NONE
Since it's an opportunistic writeback and not a data integrity action,
don't punt to blocking writeback. Just wakeup the thread and it will
flush old data.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
It's only set, it's never checked. Kill it.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
It has been unused since it was introduced in:
commit 520808bf20e90fdbdb320264ba7dd5cf9d47dcac
Author: Andrew Morton <akpm@osdl.org>
Date: Fri May 21 00:46:17 2004 -0700
[PATCH] block device layer: separate backing_dev_info infrastructure
So lets just kill it.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Fix the condition of strcmp for "*".
Also fix NULL pointer dereference when glob is NULL.
Signed-off-by: Atsushi Tsuji <a-tsuji@bk.jp.nec.com>
LKML-Reference: <4AAF6726.5090905@bk.jp.nec.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
get/set_wallclock() have already a set of platform dependent
implementations (default, EFI, paravirt). MRST will add another
variant.
Moving them to platform ops simplifies the existing code and minimizes
the effort to integrate new variants.
Signed-off-by: Feng Tang <feng.tang@intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Make the max_background and congestion_threshold parameters of a FUSE
mount tunable at runtime by adding the respective knobs to its directory
within the fusectl filesystem.
Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
An untrusted user could DoS the system if s/he were allowed to accumulate an
arbitrary number of pending background requests by setting the above limits
to extremely high values in INIT. This patch excludes this possibility by
imposing global upper limits on the possible values of per-mount "max
background requests" and "congestion threshold" parameters for unprivileged
FUSE filesystems.
These global limits are implemented as module parameters.
Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
drop_nlink() is the API function to decrease the link count of an inode.
However, at a place the control filesystem used the decrement operator
on i_nlink directly. Fix this.
Cc: Anand Avati <avati@gluster.com>
Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
|
|
The old code was using smp_call_function_many which skips the current
cpu if it is in the supplied cpumask. Switch to the rdmsr_on_cpus()
interface which takes care of that.
In addition, add get_cpus_on_this_dct_cpumask helper which computes a
cpumask of all the cores on a node and thus on a DCT.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Simplify the procedure by checking if there is any DIMM in each channel.
This patch will fix the bugs such as when there is no DIMMs under
certain node, two DIMMs in the same channel, and only one DIMM in each
channel of the node.
Borislav: minor fixups
Signed-off-by: Wan Wei <wanwei@mail.dawning.com.cn>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Simplify code flow and make sure return value is always valid since
further driver init depends on it. Carve out long warning string and
make code more readable. Shorten some names, while at it.
There should be no functional change resulting from this patch.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
|
|
Peter noticed that we have 3 ways of referring to the idle thread:
[idle]:0
swapper:0
swapper-0
Standardize on 'swapper:0'.
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Use 'perf sched latency' to track the current task based on
context-switch events, and flag the cases where there's some
impossible transition: such as a PID being switched out that
was not switched in.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Cc: chris.mason@oracle.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
Useful for some testing scenarios, although specific testing is often
done better through MADV_POISON
This can be done with the x86 level MCE injector too, but this interface
allows it to do independently from low level x86 changes.
v2: Add module license (Haicheng Li)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
Impact: optional, useful for debugging
Add a new madvice sub command to inject poison for some
pages in a process' address space. This is useful for
testing the poison page handling.
This patch can allow root to tie up large amounts of memory.
I got feedback from container developers and they didn't see any
problem.
v2: Use write flag for get_user_pages to make sure to always get
a fresh page
v3: Don't request write mapping (Fengguang Wu)
v4: Move MADV_* number to avoid conflict with KSM (Hugh Dickins)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
Enable hardware memory error handling for NFS
Truncation of data pages at runtime should be safe in NFS,
even when it doesn't support migration so far.
Trond tells me migration is also queued up for 2.6.32.
Acked-by: Trond.Myklebust@netapp.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
Enable removing of corrupted pages through truncation
for a bunch of file systems: ext*, xfs, gfs2, ocfs2, ntfs
These should cover most server needs.
I chose the set of migration aware file systems for this
for now, assuming they have been especially audited.
But in general it should be safe for all file systems
on the data area that support read/write and truncate.
Caveat: the hardware error handler does not take i_mutex
for now before calling the truncate function. Is that ok?
Cc: tytso@mit.edu
Cc: hch@infradead.org
Cc: mfasheh@suse.com
Cc: aia21@cantab.net
Cc: hugh.dickins@tiscali.co.uk
Cc: swhiteho@redhat.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
Add the high level memory handler that poisons pages
that got corrupted by hardware (typically by a two bit flip in a DIMM
or a cache) on the Linux level. The goal is to prevent everyone
from accessing these pages in the future.
This done at the VM level by marking a page hwpoisoned
and doing the appropriate action based on the type of page
it is.
The code that does this is portable and lives in mm/memory-failure.c
To quote the overview comment:
High level machine check handler. Handles pages reported by the
hardware as being corrupted usually due to a 2bit ECC memory or cache
failure.
This focuses on pages detected as corrupted in the background.
When the current CPU tries to consume corruption the currently
running process can just be killed directly instead. This implies
that if the error cannot be handled for some reason it's safe to
just ignore it because no corruption has been consumed yet. Instead
when that happens another machine check will happen.
Handles page cache pages in various states. The tricky part
here is that we can access any page asynchronous to other VM
users, because memory failures could happen anytime and anywhere,
possibly violating some of their assumptions. This is why this code
has to be extremely careful. Generally it tries to use normal locking
rules, as in get the standard locks, even if that means the
error handling takes potentially a long time.
Some of the operations here are somewhat inefficient and have non
linear algorithmic complexity, because the data structures have not
been optimized for this case. This is in particular the case
for the mapping from a vma to a process. Since this case is expected
to be rare we hope we can get away with this.
There are in principle two strategies to kill processes on poison:
- just unmap the data and wait for an actual reference before
killing
- kill as soon as corruption is detected.
Both have advantages and disadvantages and should be used
in different situations. Right now both are implemented and can
be switched with a new sysctl vm.memory_failure_early_kill
The default is early kill.
The patch does some rmap data structure walking on its own to collect
processes to kill. This is unusual because normally all rmap data structure
knowledge is in rmap.c only. I put it here for now to keep
everything together and rmap knowledge has been seeping out anyways
Includes contributions from Johannes Weiner, Chris Mason, Fengguang Wu,
Nick Piggin (who did a lot of great work) and others.
Cc: npiggin@suse.de
Cc: riel@redhat.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
|
|
This allows processes to override their early/late kill
behaviour on hardware memory errors.
Typically applications which are memory error aware is
better of with early kill (see the error as soon
as possible), all others with late kill (only
see the error when the error is really impacting execution)
There's a global sysctl, but this way an application
can set its specific policy.
We're using two bits, one to signify that the process
stated its intention and that
I also made the prctl future proof by enforcing
the unused arguments are 0.
The state is inherited to children.
Note this makes us officially run out of process flags
on 32bit, but the next patch can easily add another field.
Manpage patch will be supplied separately.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
The dirtying of page and set_page_dirty() can be moved into the page lock.
- In shmem_write_end(), the page was dirtied while the page lock was held,
but it's being marked dirty just after dropping the page lock.
- In shmem_symlink(), both dirtying and marking can be moved into page lock.
It's valuable for the hwpoison code to know whether one bad page can be dropped
without losing data. It mainly judges by testing the PG_dirty bit after taking
the page lock. So it becomes important that the dirtying of page and the
marking of dirtiness are both done inside the page lock. Which is a common
practice, but sadly not a rule.
The noticeable exceptions are
- mapped pages
- pages with buffer_heads
The above pages could go dirty at any time. Fortunately the hwpoison will
unmap the page and release the buffer_heads beforehand anyway.
Many other types of pages (eg. metadata pages) can also be dirtied at will by
their owners, the hwpoison code cannot do meaningful things to them anyway.
Only the dirtiness of pagecache pages owned by regular files are interested.
v2: AK: Add comment about set_page_dirty rules (suggested by Peter Zijlstra)
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
Truncating metadata pages is not safe right now before
we haven't audited all file systems.
To enable truncation only for data address space define
a new address_space callback error_remove_page.
This is used for memory_failure.c memory error handling.
This can be then set to truncate_inode_page()
This patch just defines the new operation and adds documentation.
Callers and users come in followon patches.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
Add a simple way to invalidate a single page
This is just a refactoring of the truncate.c code.
Originally from Fengguang, modified by Andi Kleen.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
Extract out truncate_inode_page() out of the truncate path so that
it can be used by memory-failure.c
[AK: description, headers, fix typos]
v2: Some white space changes from Fengguang Wu
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
If memory corruption hits the free buddy pages, we can safely ignore them.
No one will access them until page allocation time, then prep_new_page()
will automatically check and isolate PG_hwpoison page for us (for 0-order
allocation).
This patch expands prep_new_page() to check every component page in a high
order page allocation, in order to completely stop PG_hwpoison pages from
being recirculated.
Note that the common case -- only allocating a single page, doesn't
do any more work than before. Allocating > order 0 does a bit more work,
but that's relatively uncommon.
This simple implementation may drop some innocent neighbor pages, hopefully
it is not a big problem because the event should be rare enough.
This patch adds some runtime costs to high order page users.
[AK: Improved description]
v2: Andi Kleen:
Port to -mm code
Move check into separate function.
Don't dump stack in bad_pages for hwpoisoned pages.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
When a page has the poison bit set replace the PTE with a poison entry.
This causes the right error handling to be done later when a process runs
into it.
v2: add a new flag to not do that (needed for the memory-failure handler
later) (Fengguang)
v3: remove unnecessary is_migration_entry() test (Fengguang, Minchan)
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
try_to_unmap currently has multiple modi (migration, munlock, normal unmap)
which are selected by magic flag variables. The logic is not very straight
forward, because each of these flag change multiple behaviours (e.g.
migration turns off aging, not only sets up migration ptes etc.)
Also the different flags interact in magic ways.
A later patch in this series adds another mode to try_to_unmap, so
this becomes quickly unmanageable.
Replace the different flags with a action code (migration, munlock, munmap)
and some additional flags as modifiers (ignore mlock, ignore aging).
This makes the logic more straight forward and allows easier extension
to new behaviours. Change all the caller to declare what they want to
do.
This patch is supposed to be a nop in behaviour. If anyone can prove
it is not that would be a bug.
Cc: Lee.Schermerhorn@hp.com
Cc: npiggin@suse.de
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
Add VM_FAULT_HWPOISON handling to the x86 page fault handler. This is
very similar to VM_FAULT_OOM, the only difference is that a different
si_code is passed to user space and the new addr_lsb field is initialized.
v2: Make the printk more verbose/unique
Cc: x86@kernel.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
