summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-21s390/ap: Refine AP bus bindings complete processingHarald Freudenberger
With the rework of the AP bus scan and the introduction of a bindings complete completion also the timing until the userspace finally receives a AP bus binding complete uevent had increased. Unfortunately this event triggers some important jobs for preparation of KVM guests, for example the modification of card/queue masks to reassign AP resources to the alternate AP queue device driver (vfio_ap) which is the precondition for building mediated devices which may be a precondition for starting KVM guests using AP resources. This small fix now triggers the check for binding complete each time an AP device driver has registered. With this patch the bindings complete may be posted up to 30s earlier as there is no need to wait for the next AP bus scan any more. Fixes: 778412ab915d ("s390/ap: rearm APQNs bindings complete completion") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Cc: stable@vger.kernel.org Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-08-21s390/mm: Pin identity mapping base to zeroAlexander Gordeev
SIE instruction performs faster when the virtual address of SIE block matches the physical one. Pin the identity mapping base to zero for the benefit of SIE and other instructions that have similar performance impact. Still, randomize the base when DEBUG_VM kernel configuration option is enabled. Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-08-21s390/mm: Prevent lowcore vs identity mapping overlapAlexander Gordeev
The identity mapping position in virtual memory is randomized together with the kernel mapping. That position can never overlap with the lowcore even when the lowcore is relocated. Prevent overlapping with the lowcore to allow independent positioning of the identity mapping. With the current value of the alternative lowcore address of 0x70000 the overlap could happen in case the identity mapping is placed at zero. This is a prerequisite for uncoupling of randomization base of kernel image and identity mapping in virtual memory. Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2024-08-21drm/i915/gem: Calculate object page offset for partial memory mappingAndi Shyti
To enable partial memory mapping of GPU virtual memory, it's necessary to introduce an offset to the object's memory (obj->mm.pages) scatterlist. This adjustment compensates for instances when userspace mappings do not start from the beginning of the object. Based on a patch by Chris Wilson. Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240807100521.478266-3-andi.shyti@linux.intel.com
2024-08-21drm/i915/gem: Do not look for the exact address in nodeAndi Shyti
In preparation for the upcoming partial memory mapping feature, we want to make sure that when looking for a node we consider also the offset and not just the starting address of the virtual memory node. Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240807100521.478266-2-andi.shyti@linux.intel.com
2024-08-21io_uring/kbuf: sanitize peek buffer setupJens Axboe
Harden the buffer peeking a bit, by adding a sanity check for it having a valid size. Outside of that, arg->max_len is a size_t, though it's only ever set to a 32-bit value (as it's governed by MAX_RW_COUNT). Bump our needed check to a size_t so we know it fits. Finally, cap the calculated needed iov value to the PEEK_MAX_IMPORT, which is the maximum number of segments that should be peeked. Fixes: 35c8711c8fc4 ("io_uring/kbuf: add helpers for getting/peeking multiple buffers") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-08-21drm/i915/psr: Prevent Panel Replay if CRC calculation is enabledJouni Högander
Similarly as for PSR2 CRC calculation seems to timeout when Panel Replay is enabled. Fix this by falling back to PSR if CRC calculation is enabled. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2266 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240819092549.1298233-1-jouni.hogander@intel.com
2024-08-21drm/xe/display: drop unused rawclk_freq and RUNTIME_INFO()Jani Nikula
With rawclk_freq moved to display runtime info, xe has no users left for them. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9f09274bddc14f555c0102f37af6df23b4433102.1724144570.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-21drm/i915: move rawclk from runtime to display runtime infoJani Nikula
It's mostly about display, so move it under display. This should also fix rawclk freq initialization in the xe driver. v2: Change the init location Link: https://lore.kernel.org/r/20240819133138.147511-2-maarten.lankhorst@linux.intel.com Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/39330d09c48509e013f01fd0247a9b7c291173e2.1724144570.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-21ata: pata_macio: Use WARN instead of BUGMichael Ellerman
The overflow/underflow conditions in pata_macio_qc_prep() should never happen. But if they do there's no need to kill the system entirely, a WARN and failing the IO request should be sufficient and might allow the system to keep running. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-08-21ata: pata_macio: Fix DMA table overflowMichael Ellerman
Kolbjørn and Jonáš reported that their 32-bit PowerMacs were crashing in pata-macio since commit 09fe2bfa6b83 ("ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K"). For example: kernel BUG at drivers/ata/pata_macio.c:544! Oops: Exception in kernel mode, sig: 5 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 DEBUG_PAGEALLOC PowerMac ... NIP pata_macio_qc_prep+0xf4/0x190 LR pata_macio_qc_prep+0xfc/0x190 Call Trace: 0xc1421660 (unreliable) ata_qc_issue+0x14c/0x2d4 __ata_scsi_queuecmd+0x200/0x53c ata_scsi_queuecmd+0x50/0xe0 scsi_queue_rq+0x788/0xb1c __blk_mq_issue_directly+0x58/0xf4 blk_mq_plug_issue_direct+0x8c/0x1b4 blk_mq_flush_plug_list.part.0+0x584/0x5e0 __blk_flush_plug+0xf8/0x194 __submit_bio+0x1b8/0x2e0 submit_bio_noacct_nocheck+0x230/0x304 btrfs_work_helper+0x200/0x338 process_one_work+0x1a8/0x338 worker_thread+0x364/0x4c0 kthread+0x100/0x104 start_kernel_thread+0x10/0x14 That commit increased max_segment_size to 64KB, with the justification that the SCSI core was already using that size when PAGE_SIZE == 64KB, and that there was existing logic to split over-sized requests. However with a sufficiently large request, the splitting logic causes each sg to be split into two commands in the DMA table, leading to overflow of the DMA table, triggering the BUG_ON(). With default settings the bug doesn't trigger, because the request size is limited by max_sectors_kb == 1280, however max_sectors_kb can be increased, and apparently some distros do that by default using udev rules. Fix the bug for 4KB kernels by reverting to the old max_segment_size. For 64KB kernels the sg_tablesize needs to be halved, to allow for the possibility that each sg will be split into two. Fixes: 09fe2bfa6b83 ("ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K") Cc: stable@vger.kernel.org # v6.10+ Reported-by: Kolbjørn Barmen <linux-ppc@kolla.no> Closes: https://lore.kernel.org/all/62d248bb-e97a-25d2-bcf2-9160c518cae5@kolla.no/ Reported-by: Jonáš Vidra <vidra@ufal.mff.cuni.cz> Closes: https://lore.kernel.org/all/3b6441b8-06e6-45da-9e55-f92f2c86933e@ufal.mff.cuni.cz/ Tested-by: Kolbjørn Barmen <linux-ppc@kolla.no> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-08-20drm/amdgpu: fix eGPU hotplug regressionAlex Deucher
The driver needs to wait for the on board firmware to finish its initialization before probing the card. Commit 959056982a9b ("drm/amdgpu: Fix discovery initialization failure during pci rescan") switched from using msleep() to using usleep_range() which seems to have caused init failures on some navi1x boards. Switch back to msleep(). Fixes: 959056982a9b ("drm/amdgpu: Fix discovery initialization failure during pci rescan") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3559 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3500 Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Ma Jun <Jun.Ma2@amd.com> (cherry picked from commit c69b07f7bbc905022491c45097923d3487479529) Cc: stable@vger.kernel.org # 6.10.x
2024-08-20drm/amdgpu: Validate TA binary sizeCandice Li
Add TA binary size validation to avoid OOB write. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c0a04e3570d72aaf090962156ad085e37c62e442) Cc: stable@vger.kernel.org
2024-08-20drm/amdgpu/sdma5.2: limit wptr workaround to sdma 5.2.1Alex Deucher
The workaround seems to cause stability issues on other SDMA 5.2.x IPs. Fixes: a03ebf116303 ("drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3556 Acked-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2dc3851ef7d9c5439ea8e9623fc36878f3b40649) Cc: stable@vger.kernel.org
2024-08-20drm/amdgpu: fixing rlc firmware loading failure issueYang Wang
Skip rlc firmware validation to ignore firmware header size mismatch issues. This restores the workaround added in commit 849e133c973c ("drm/amdgpu: Fix the null pointer when load rlc firmware") Fixes: 3af2c80ae2f5 ("drm/amdgpu: refine gfx10 firmware loading") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3551 Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 89ec85d16eb8110d88c273d1d34f1fe5a70ba8cc)
2024-08-20drm/amd/gfx11: move the gfx mutex into the callerAlex Deucher
Otherwise we can fail to drop the software mutex when we fail to take the hardware mutex. Fixes: 76acba7b7f12 ("drm/amdgpu/gfx11: add a mutex for the gfx semaphore") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/pm: ensure the fw_info is not null before using itTim Huang
This resolves the dereference null return value warning reported by Coverity. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Jesse Zhang <jesse.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/amdgpu: allow use kiq to do hdp flush under sriovVictor Zhao
when use cpu to do page table update under sriov runtime, since mmio access is blocked, kiq has to be used to flush hdp. change WREG32_NO_KIQ to WREG32 to allow kiq. Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu: fix eGPU hotplug regressionAlex Deucher
The driver needs to wait for the on board firmware to finish its initialization before probing the card. Commit 959056982a9b ("drm/amdgpu: Fix discovery initialization failure during pci rescan") switched from using msleep() to using usleep_range() which seems to have caused init failures on some navi1x boards. Switch back to msleep(). Fixes: 959056982a9b ("drm/amdgpu: Fix discovery initialization failure during pci rescan") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3559 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3500 Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Ma Jun <Jun.Ma2@amd.com>
2024-08-20drm/amd/display: Promote DC to 3.2.297Martin Leung
- Various DML 2.1 fixes - Fix module unload - Fix construct_phy with MXM connector - Support UHBR10 link rate on eDP - Revert updated DCCG wrappers Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: DML2.1 Reintegration for Various FixesAustin Zheng
[Why and How] DML2.1 reintegration for several fixes and updates to the DML code. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Roman Li <roman.li@amd Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: fix double free issue during amdgpu module unloadTim Huang
Flexible endpoints use DIGs from available inflexible endpoints, so only the encoders of inflexible links need to be freed. Otherwise, a double free issue may occur when unloading the amdgpu module. [ 279.190523] RIP: 0010:__slab_free+0x152/0x2f0 [ 279.190577] Call Trace: [ 279.190580] <TASK> [ 279.190582] ? show_regs+0x69/0x80 [ 279.190590] ? die+0x3b/0x90 [ 279.190595] ? do_trap+0xc8/0xe0 [ 279.190601] ? do_error_trap+0x73/0xa0 [ 279.190605] ? __slab_free+0x152/0x2f0 [ 279.190609] ? exc_invalid_op+0x56/0x70 [ 279.190616] ? __slab_free+0x152/0x2f0 [ 279.190642] ? asm_exc_invalid_op+0x1f/0x30 [ 279.190648] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191096] ? __slab_free+0x152/0x2f0 [ 279.191102] ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191469] kfree+0x260/0x2b0 [ 279.191474] dcn10_link_encoder_destroy+0x19/0x30 [amdgpu] [ 279.191821] link_destroy+0xd7/0x130 [amdgpu] [ 279.192248] dc_destruct+0x90/0x270 [amdgpu] [ 279.192666] dc_destroy+0x19/0x40 [amdgpu] [ 279.193020] amdgpu_dm_fini+0x16e/0x200 [amdgpu] [ 279.193432] dm_hw_fini+0x26/0x40 [amdgpu] [ 279.193795] amdgpu_device_fini_hw+0x24c/0x400 [amdgpu] [ 279.194108] amdgpu_driver_unload_kms+0x4f/0x70 [amdgpu] [ 279.194436] amdgpu_pci_remove+0x40/0x80 [amdgpu] [ 279.194632] pci_device_remove+0x3a/0xa0 [ 279.194638] device_remove+0x40/0x70 [ 279.194642] device_release_driver_internal+0x1ad/0x210 [ 279.194647] driver_detach+0x4e/0xa0 [ 279.194650] bus_remove_driver+0x6f/0xf0 [ 279.194653] driver_unregister+0x33/0x60 [ 279.194657] pci_unregister_driver+0x44/0x90 [ 279.194662] amdgpu_exit+0x19/0x1f0 [amdgpu] [ 279.194939] __do_sys_delete_module.isra.0+0x198/0x2f0 [ 279.194946] __x64_sys_delete_module+0x16/0x20 [ 279.194950] do_syscall_64+0x58/0x120 [ 279.194954] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 279.194980] </TASK> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: DCN35 set min dispclk to 50MhzNicholas Susanto
[Why] Causes hard hangs when resuming after display off on extended/duplicate modes [How] Set the min dispclk to 50Mhz for DCN35 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Fix construct_phy with MXM connectorIlya Bakoulin
[Why/How] The call to construct_phy will fail in cases where connector type is MXM, and the dc_link won't be properly created/initialized. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Support UHBR10 link rate on eDPSung Joon Kim
[why] Supporting UHBR10 link rate on eDP leverages the existing DP2.0 code but need to add some small adjustments in code. [how] Acknowledge the given DPCD caps for UHBR10 link rate support and allow DP2.0 programming sequence and link training for eDP. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Hardware cursor changes color when switched to software cursorNevenko Stupar
[Why & How] DCN4 Cursor has separate degamma block and should always do Cursor degamma for Cursor color modes. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Allow UHBR Interop With eDP Supported Link Rates TableMichael Strauss
[WHY] eDP 2.0 is introducing support for UHBR link rates, however current eDP ILR link optimization does not account for UHBR capabilities. Either UHBR capabilities will be provided via the same 128b/132b rate DPCD caps that are currently used on DP2.1, or Table 4-13 may be updated to include UHBR rates. [HOW] Add extra Supported Link Rates table translations for UHBR10/13.5/20. Update eDP link setting optimization search to be aware of 128b/132b DPCD rate caps in order to unblock UHBR on panels with Supported Link Rates table. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Remove redundant check in DCN35 hwseqNicholas Susanto
Removing redundant condition. Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: remove an extraneous call for checking dchub clockAurabindo Pillai
when removing the amdgpu module and reinserting it, a call trace is triggered: [ 334.230602] RIP: 0010:hubbub2_get_dchub_ref_freq+0xbb/0xe0 [amdgpu] [ 334.230807] Code: 25 28 00 00 00 75 3c 48 8d 65 f0 5b 41 5c 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 45 31 db e9 55 a1 ca de <0f> 0b eb c6 0f 0b eb c2 d1 eb 8d 83 c0 63 ff ff 3d 20 4e 00 00 76 [ 334.230809] RSP: 0018:ffffbc8b823fb540 EFLAGS: 00010246 [ 334.230811] RAX: 0000000000001000 RBX: 00000000000186a0 RCX: 0000000000000000 [ 334.230812] RDX: ffffbc8b823fb544 RSI: 0000000000000000 RDI: 0000000000000000 [ 334.230813] RBP: ffffbc8b823fb560 R08: 0000000000000000 R09: 0000000000000000 [ 334.230814] R10: 0000000000000000 R11: 000000000000000f R12: ffff9e644f1f2bb0 [ 334.230815] R13: ffff9e6451361300 R14: 0000000000000000 R15: ffff9e6452c00000 [ 334.230816] FS: 00007af7c8519000(0000) GS:ffff9e737dd00000(0000) knlGS:0000000000000000 [ 334.230817] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 334.230818] CR2: 0000703576b9cbd0 CR3: 00000001095a2000 CR4: 0000000000750ee0 [ 334.230819] PKRU: 55555554 [ 334.230820] Call Trace: [ 334.230822] <TASK> [ 334.230824] ? show_regs+0x6d/0x80 [ 334.230828] ? __warn+0x89/0x160 [ 334.230832] ? hubbub2_get_dchub_ref_freq+0xbb/0xe0 [amdgpu] [ 334.231024] ? report_bug+0x17e/0x1b0 [ 334.231028] ? handle_bug+0x46/0x90 [ 334.231030] ? exc_invalid_op+0x18/0x80 [ 334.231032] ? asm_exc_invalid_op+0x1b/0x20 [ 334.231036] ? hubbub2_get_dchub_ref_freq+0xbb/0xe0 [amdgpu] [ 334.231217] dc_create_resource_pool+0xfd/0x320 [amdgpu] [ 334.231408] dc_create+0x256/0x700 [amdgpu] [ 334.231588] ? srso_alias_return_thunk+0x5/0x7f [ 334.231590] ? dmi_matches+0xa0/0x230 [ 334.231594] amdgpu_dm_init+0x28c/0x25f0 [amdgpu] [ 334.231791] ? prb_read_valid+0x1c/0x30 [ 334.231795] ? __irq_work_queue_local+0x43/0xf0 [ 334.231798] ? srso_alias_return_thunk+0x5/0x7f [ 334.231800] ? irq_work_queue+0x2f/0x70 [ 334.231802] ? srso_alias_return_thunk+0x5/0x7f [ 334.231803] ? __wake_up_klogd.part.0+0x40/0x70 [ 334.231805] ? srso_alias_return_thunk+0x5/0x7f [ 334.231807] ? vprintk_emit+0xd9/0x210 [ 334.231809] ? set_dev_info+0x130/0x1c0 [ 334.231812] ? srso_alias_return_thunk+0x5/0x7f [ 334.231813] ? dev_printk_emit+0xa1/0xe0 [ 334.231819] dm_hw_init+0x14/0x30 [amdgpu] [ 334.231993] amdgpu_device_init+0x23c7/0x2fc0 [amdgpu] [ 334.232134] ? pci_read_config_word+0x25/0x50 [ 334.232139] amdgpu_driver_load_kms+0x1a/0xd0 [amdgpu] [ 334.232284] amdgpu_pci_probe+0x1f9/0x620 [amdgpu] On DCN401, get_dchub_ref_freq() hook is called before init_hw() hook. Hence, it is expected to trigger an assert. Remove the extraneous call to get_dchub_ref_freq() to suppress the call trace Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Update HPO I/O When Handling Link Retrain Automation RequestMichael Strauss
[WHY] Previous multi-display HPO fix moved where HPO I/O enable/disable is performed. The codepath now taken to enable/disable HPO I/O is not used for compliance test automation, meaning that if a compliance box being driven at a DP1 rate requests retrain at UHBR, HPO I/O will remain off if it was previously off. [HOW] Explicitly update HPO I/O after allocating encoders for test request. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20Revert "drm/amd/display: Update to using new dccg callbacks"Hansen Dsouza
[Why] Revert updated DCCG wrappers due to regression [How] This reverts commit 680458d41aa46a009909482f58358205b5c4b438. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu: Validate TA binary sizeCandice Li
Add TA binary size validation to avoid OOB write. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdkfd: Update BadOpcode Interrupt handling with MESMukul Joshi
Based on the recommendation of MEC FW, update BadOpcode interrupt handling by unmapping all queues, removing the queue that got the interrupt from scheduling and remapping rest of the queues back when using MES scheduler. This is done to prevent the case where unmapping of the bad queue can fail thereby causing a GPU reset. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdkfd: Update queue unmap after VM fault with MESMukul Joshi
MEC FW expects MES to unmap all queues when a VM fault is observed on a queue and then resumed once the affected process is terminated. Use the MES Suspend and Resume APIs to achieve this. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu: Implement MES Suspend and Resume APIs for GFX11Mukul Joshi
Add implementation for MES Suspend and Resume APIs to unmap/map all queues for GFX11. Support for GFX12 will be added when the corresponding firmware support is in place. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdkfd: Enable processes isolation on gfx9Amber Lin
When amdgpu enable enforce_isolation, KFD enables single-process mode in HWS and sets exec_cleaner_shader bit in MAP_PROCESS. Signed-off-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu/gfx_v9_4_3: Apply Isolation Enforcement to GFX & Compute ringsSrinivasan Shanmugam
This commit applies isolation enforcement to the GFX and Compute rings in the gfx_v9_4_3 module. The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and `amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be called when a ring begins and ends its use, respectively. `amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring begins its use. This function cancels any scheduled `enforce_isolation_work` and, if necessary, signals the Kernel Fusion Driver (KFD) to stop the runqueue. `amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends its use. This function schedules `enforce_isolation_work` to be run after a delay. These functions are part of the Enforce Isolation Handler, which enforces shader isolation on AMD GPUs to prevent data leakage between different processes. The commit also includes a check for the type of the ring. If the type of the ring is `AMDGPU_RING_TYPE_COMPUTE`, the `xcp_id` of the `enforce_isolation` structure in the `gfx` structure of the `amdgpu_device` is set to the `xcp_id` of the ring. This ensures that the correct `xcp_id` is used when enforcing isolation on compute rings. The `xcp_id` is an identifier for an XCP partition, and different rings can be associated with different XCP partitions. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
2024-08-20drm/amdgpu/gfx9: Apply Isolation Enforcement to GFX & Compute ringsSrinivasan Shanmugam
This commit applies isolation enforcement to the GFX and Compute rings in the gfx_v9_0 module. The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and `amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be called when a ring begins and ends its use, respectively. `amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring begins its use. This function cancels any scheduled `enforce_isolation_work` and, if necessary, signals the Kernel Fusion Driver (KFD) to stop the runqueue. `amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends its use. This function schedules `enforce_isolation_work` to be run after a delay. These functions are part of the Enforce Isolation Handler, which enforces shader isolation on AMD GPUs to prevent data leakage between different processes. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Christian König <christian.koenig@amd.com>
2024-08-20drm/amdgpu: Implement Enforce Isolation Handler for KGD/KFD serializationSrinivasan Shanmugam
This commit introduces the Enforce Isolation Handler designed to enforce shader isolation on AMD GPUs, which helps to prevent data leakage between different processes. The handler counts the number of emitted fences for each GFX and compute ring. If there are any fences, it schedules the `enforce_isolation_work` to be run after a delay of `GFX_SLICE_PERIOD`. If there are no fences, it signals the Kernel Fusion Driver (KFD) to resume the runqueue. The function is synchronized using the `enforce_isolation_mutex`. This commit also introduces a reference count mechanism (kfd_sch_req_count) to keep track of the number of requests to enable the KFD scheduler. When a request to enable the KFD scheduler is made, the reference count is decremented. When the reference count reaches zero, a delayed work is scheduled to enforce isolation after a delay of GFX_SLICE_PERIOD. When a request to disable the KFD scheduler is made, the function first checks if the reference count is zero. If it is, it cancels the delayed work for enforcing isolation and checks if the KFD scheduler is active. If the KFD scheduler is active, it sends a request to stop the KFD scheduler and sets the KFD scheduler state to inactive. Then, it increments the reference count. The function is synchronized using the kfd_sch_mutex to ensure that the KFD scheduler state and reference count are updated atomically. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdkfd: APIs to stop/start KFD schedulingAmber Lin
Provide amdgpu_amdkfd_stop_sched() for amdgpu to stop KFD scheduling compute work on HIQ. amdgpu_amdkfd_start_sched() resumes the scheduling. When amdgpu_amdkfd_stop_sched is called, KFD will unmap queues from runlist. If users send ioctls to KFD to create queues, they'll be added but those queues won't be mapped to runlist (so not scheduled) until amdgpu_amdkfd_start_sched is called. v2: fix build (Alex) Signed-off-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu/gfx9: Add cleaner shader support for GFX9.4.4 hardwareSrinivasan Shanmugam
This commit extends the cleaner shader feature to support GFX9.4.4 hardware. The cleaner shader feature is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). This operation needs to be performed in isolation, while no other tasks should be running on the GPU at the same time. Previously, the cleaner shader feature was implemented for GFX9.4.3 hardware. This commit adds support for GFX9.4.4 hardware by allowing the cleaner shader to be used with this hardware version. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu/gfx9: Add cleaner shader for GFX9.4.3Srinivasan Shanmugam
This commit adds the cleaner shader microcode for GFX9.4.3 GPUs. The cleaner shader is a piece of GPU code that is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). Clearing these resources is important for ensuring data isolation between different workloads running on the GPU. Without the cleaner shader, residual data from a previous workload could potentially be accessed by a subsequent workload, leading to data leaks and incorrect computation results. The cleaner shader microcode is represented as an array of 32-bit words (`gfx_9_4_3_cleaner_shader_hex`). This array is the binary representation of the cleaner shader code, which is written in a low-level GPU instruction set. When the cleaner shader feature is enabled, the AMDGPU driver loads this array into a specific location in the GPU memory. The GPU then reads this memory location to fetch and execute the cleaner shader instructions. The cleaner shader is executed automatically by the GPU at the end of each workload, before the next workload starts. This ensures that all GPU resources are in a clean state before the start of each workload. This addition is part of the cleaner shader feature implementation. The cleaner shader feature helps improve GPU performance and resource utilization by cleaning up GPU resources after they are used. It also enhances security and reliability by preventing data leaks between workloads. v2: fix copyright date (Alex) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu/gfx9: Implement cleaner shader support for GFX9.4.3 hardwareSrinivasan Shanmugam
The patch modifies the gfx_v9_4_3_kiq_set_resources function to write the cleaner shader's memory controller address to the ring buffer. It also adds a new function, gfx_v9_4_3_ring_emit_cleaner_shader, which emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer. This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the gfx_v9_4_3 module. This packet is used to emit the cleaner shader, which is used to clear GPU memory before it's reused, helping to prevent data leakage between different processes. Finally, the patch updates the ring function structures to include the new gfx_v9_4_3_ring_emit_cleaner_shader function. This allows the cleaner shader to be emitted as part of the ring's operations. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu/gfx9: Implement cleaner shader support for GFX9 hardwareSrinivasan Shanmugam
The patch modifies the gfx_v9_0_kiq_set_resources function to write the cleaner shader's memory controller address to the ring buffer. It also adds a new function, gfx_v9_0_ring_emit_cleaner_shader, which emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer. This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the gfx_v9_0 module. This packet is used to emit the cleaner shader, which is used to clear GPU memory before it's reused, helping to prevent data leakage between different processes. Finally, the patch updates the ring function structures to include the new gfx_v9_0_ring_emit_cleaner_shader function. This allows the cleaner shader to be emitted as part of the ring's operations. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu: Add PACKET3_RUN_CLEANER_SHADER for cleaner shader executionSrinivasan Shanmugam
This commit adds the PACKET3_RUN_CLEANER_SHADER definition. This packet is a command packet used to instruct the GPU to execute the cleaner shader. The cleaner shader is a piece of GPU code that is used to clear or initialize certain GPU resources, such as Local Data Share (LDS), Vector General Purpose Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). Clearing these resources is important for ensuring data isolation between different workloads running on the GPU. The PACKET3_RUN_CLEANER_SHADER packet is used to trigger the execution of the cleaner shader on the GPU. The packet consists of a header followed by a RESERVED field, which is programmed to zero. When the GPU receives this packet, it fetches and executes the cleaner shader instructions from the location specified in the packet. The cleaner shader feature helps to enhances security and reliability by preventing data leaks between workloads. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu: Add sysfs interface for running cleaner shaderSrinivasan Shanmugam
This patch adds a new sysfs interface for running the cleaner shader on AMD GPUs. The cleaner shader is used to clear GPU memory before it's reused, which can help prevent data leakage between different processes. The new sysfs file is write-only and is named `run_cleaner_shader`. Write the number of the partition to this file to trigger the cleaner shader on that partition. There is only one partition on GPUs which do not support partitioning. Changes made in this patch: - Added `amdgpu_set_run_cleaner_shader` function to handle writes to the `run_cleaner_shader` sysfs file. - Added `run_cleaner_shader` to the list of device attributes in `amdgpu_device_attrs`. - Updated `default_attr_update` to handle `run_cleaner_shader`. - Added `AMDGPU_DEVICE_ATTR_WO` macro to create write-only device attributes. v2: fix error handling (Alex) Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
2024-08-20drm/amdgpu: Add enforce_isolation sysfs attributeSrinivasan Shanmugam
This commit adds a new sysfs attribute 'enforce_isolation' to control the 'enforce_isolation' setting per GPU. The attribute can be read and written, and accepts values 0 (disabled) and 1 (enabled). When 'enforce_isolation' is enabled, reserved VMIDs are allocated for each ring. When it's disabled, the reserved VMIDs are freed. The set function locks a mutex before changing the 'enforce_isolation' flag and the VMIDs, and unlocks it afterwards. This ensures that these operations are atomic and prevents race conditions and other concurrency issues. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amdgpu: Enforce isolation as part of the jobSrinivasan Shanmugam
This patch adds a new parameter 'enforce_isolation' to the amdgpu_job structure. This parameter is used to determine whether shader isolation should be enforced for a job. The enforce_isolation parameter is then stored in the amdgpu_job structure and used when flushing the VM. The enforce_isolation field of the amdgpu_job structure is set directly after the job is allocated This change allows more fine-grained control over shader isolation, making it possible to enforce isolation on a per-job basis rather than globally. This can be useful in scenarios where only certain jobs require isolation. Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Christian König <christian.koenig@amd.com>
2024-08-20Merge tag '6.11-rc4-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: - important reconnect fix - fix for memcpy issues on mount - two minor cleanup patches * tag '6.11-rc4-server-fixes' of git://git.samba.org/ksmbd: ksmbd: Replace one-element arrays with flexible-array members ksmbd: fix spelling mistakes in documentation ksmbd: fix race condition between destroy_previous_session() and smb2 operations() ksmbd: Use unsafe_memcpy() for ntlm_negotiate
2024-08-20Merge branch 'mptcp-pm-fix-ids-not-being-reusable'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: pm: fix IDs not being reusable Here are more fixes for the MPTCP in-kernel path-manager. In this series, the fixes are around the endpoint IDs not being reusable for on-going connections when re-creating endpoints with previously used IDs. - Patch 1 fixes this case for endpoints being used to send ADD_ADDR. Patch 2 validates this fix. The issue is present since v5.10. - Patch 3 fixes this case for endpoints being used to establish new subflows. Patch 4 validates this fix. The issue is present since v5.10. - Patch 5 fixes this case when all endpoints are flushed. Patch 6 validates this fix. The issue is present since v5.13. - Patch 7 removes a helper that is confusing, and introduced in v5.10. It helps simplifying the next patches. - Patch 8 makes sure a 'subflow' counter is only decremented when removing a 'subflow' endpoint. Can be backported up to v5.13. - Patch 9 is similar, but for a 'signal' counter. Can be backported up to v5.10. - Patch 10 checks the last max accepted ADD_ADDR limit before accepting new ADD_ADDR. For v5.10 as well. - Patch 11 removes a wrong restriction for the userspace PM, added during a refactoring in v6.5. - Patch 12 makes sure the fullmesh mode sets the ID 0 when a new subflow using the source address of the initial subflow is created. Patch 13 covers this case. This issue is present since v5.15. - Patch 14 avoid possible UaF when selecting an address from the endpoints list. ==================== Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-0-38035d40de5b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 09:04:35 +0000