summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-05mac80211: use 16 bit alignment for the if_ibss bssid fieldFelix Fietkau
Several MAC address comparison functions assume 16 bit alignment for pointers passed to them. Since the addition of the control_port field, alignment for the IBSS bssid was off by one, causing a severe performance hit on architectures without efficient unaligned access (e.g. MIPS). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mwifiex: endian bug in mwifiex_drv_change_adhoc_chan()Dan Carpenter
In mwifiex_drv_change_adhoc_chan() we pass channel to mwifiex_bss_ioctl_ibss_channel() which sets the high 16 bits. This works on little endian systems but not on big endian ones. I've changed mwifiex_drv_change_adhoc_chan() to use a 16 bit variable. This matches the other functions in the file. I considered changing mwifiex_change_adhoc_chan() as well but it turns out that the function isn't implemented so I just removed the definition. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05p54spi: Release GPIO lines and IRQ on error in p54spi_probeMax Filippov
This makes it possible to reload driver if insmod has failed due to missing firmware. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05rndis_wlan: use u8 for key indexesJussi Kivilinna
cfg80211 uses u8 for key indexes and so should rndis_wlan. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05rndis_wlan: use RNDIS_WLAN_NUM_KEYS for all key index checksJussi Kivilinna
Use new RNDIS_WLAN_NUM_KEYS for checks in add_wep_key() and add_wpa_key(). Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05rndis_wlan: fix le16/le32_to_cpu mix up with config.beacon_periodJussi Kivilinna
'beacon_period' in 'struct ndis_80211_conf' is __le32 instead of __le16 so le32_to_cpu must be used instead of le16_to_cpu. Also correct 'beacon_interval' variables used for passing this value forward from u16 to u32 and rename those variables 'beacon_period' This is to avoid confusion because 'beacon_interval' is defined as __le16 at other structure, 'struct ndis_80211_fixed_ies'. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05rndis_wlan: prevent integer overflow in indication()Dan Carpenter
If we pick a high value for "offset" then it could lead to an integer overflow and we would get past the check for: if (offset + len > buflen) { ... Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05rndis_wlan: make some variables unsignedDan Carpenter
These variables can never be less than zero because we cap them in get_device_pmkids(). Let's make them unsigned here because it's simpler to not have to worry about negative numbers when we read the code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05rndis_wlan: remove unneeded variablesDan Carpenter
We never use the "len" variable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05rndis_wlan: integer overflows in rndis_wlan_do_link_up_work()Dan Carpenter
If "offset" is negative then we can get past this check: if (offset > CONTROL_BUFFER_SIZE) Or if we pick a very high "req_ie_len" then we can get around the check: if (offset + req_ie_len > CONTROL_BUFFER_SIZE) I made "resp_ie_len" and "req_ie_len" unsigned. I don't know if it was intentional that they were signed in the original. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05{nl,cfg,mac}80211: Implement RSSI threshold for mesh peeringAshok Nagarajan
Mesh peer links are established only if average rssi of the peer candidate satisfies the threshold. This is not in 802.11s specification but was requested by David Fulgham, an open80211s user. This is a way to avoid marginal peer links with stations that are barely within range. This patch adds a new mesh configuration parameter, mesh_rssi_threshold. This feature is supported only for hardwares that report signal in dBm. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05b43: prevent firmware on bcm5354 from taking over wrong GPIO pinsHauke Mehrtens
When using the bcm5354 (Soc with integrated LP-PHY Wifi) with a recent firmware >= 478.104 it runs out of memory after a very short time in OpenWrt after doing an active scan or any thing else where packages are send. This was cased by a gpio misconfiguration, the firmware triggered the GPIO pins used for buttons on some devices and that caused an other driver (OpenWrt diag) listening for these buttons irqs to send many messages to the user space. This patch fixes the bug for my devices (Asus WL-520GU) and makes it work with firmware 666.2. Now the firmware just uses LED GPIO pin number 1 and not the button pins any more. This is the GPIO Pin layout used on my device, see [0]. GPIO pin layout: pin# name type 0 power led 1 wlan led 2 reset button 3 ses buttom This is the nvram configuration output of "nvram show |grep gpio" related nvram configuration: wl0gpio2=11 wl0gpio3=11 wl0gpio0=11 wl0gpio1=0x02 reset_gpio=2 [0]: https://dev.openwrt.org/browser/trunk/package/broadcom-diag/src/diag.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ath9k: make use of list_for_each_entry_safeMohammed Shafi Shajakhan
this does the same thing as the previous code Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ath9k: completely zero intialize valid_phy_rate_idxMohammed Shafi Shajakhan
its better to zero initialize the 'valid_phy_rate_idx' array completely Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mac80211: Fix the generation of PREQs in proactive RANN mechanism of HWMPChun-Yeow Yeoh
According to Section Y.7.4 Actions on receipt of proactive RANN, an individually addressed PREQ should be generated towards the neighbor peer mesh STA indicated in the RANN Sender Address field in the forwarding information. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mwifiex: fix bug in wildcard scan handlingAmitkumar Karwar
Currently if valid SSID list is provided in scan request, driver performs specific SSID scan otherwise wildcard scan is chosen. When wpa_supplicant provides valid SSID list followed by zero-length SSID for wildcard scan, only specific SSID scan is performed by driver. Actually driver is expected to do both type of scanning in this case. The patch fixes this issue. Also, use SSID list pointer provided by stack directly, instead of copying SSID's to local structure. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mwifiex: remove unnecessary struct mwifiex_802_11_ssidAmitkumar Karwar
Use struct cfg80211_ssid available in include/net/cfg80211.h instead of having similar definition in driver. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mwifiex: correct bitrates advertised to cfg80211Avinash Patil
1. Driver and firmware do not support 22Mbps and 72Mbps bitrates. Remove them from the rate table advertised to cfg80211. 2. First 4 rates from mwifiex_rates table are not valid for 5GHz/A band. Set correct bitrate array's index and no of rates for ieee80211_supported_band for 5GHz band. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05MIPS: BCM47XX: provide sprom to bcma busHauke Mehrtens
On SoCs the sprom is often stored in nvram in the flashchip. This patch registers a sprom fallback callback handler in bcma and provides the sprom needed for this device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05MIPS: BCM47XX: move and extend sprom parsingHauke Mehrtens
Move the sprom parsing from nvram into sprom.c. There are all values needed for sprom version 1 to 9 read from nvram and there are more sanity checks added. This is based on the sprom parsing in the open source part of the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05MIPS: BCM47XX: fix signature of nvram_parse_macaddrHauke Mehrtens
Explicitly enforce an char array of 6 bytes for the mac address. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05MIPS: BCM47XX: return number of written bytes in nvram_getenvHauke Mehrtens
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05bcma: add support for sprom not found on the deviceHauke Mehrtens
On SoCs the sprom is stored in the nvram in a special partition on the flash chip. The nvram contains the sprom for the main bus, but sometimes also for a pci devices using bcma. This patch makes it possible for the arch code to register a function to fetch the needed sprom from the nvram and provide it to the bcma code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05bcma: export bcma_find_coreHauke Mehrtens
This function is needed by the bcm47xx arch code to get the number of the ieee80211 core. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: add some missing sprom attributesHauke Mehrtens
This patch extends the sprom struct to contain all sprom attributes found in sprom version 1 to 9. This was done accordingly to the open source part of the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: add alpha2Hauke Mehrtens
This member contains the country code encoded with two chars Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: fix per path sprom varsHauke Mehrtens
On sprom version 4 and 5 there are 4 values for pa_2g, pa_5gl, pa_5g and pa_5gh, for sprom version 8 and 9 there are only 3. Make the per path sprom store also work for older sprom versions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: remove 5GHz antenna gain from spromHauke Mehrtens
There is no 2.4 GHz or 5GHz antenna gain stored in sprom. The sprom just stores the gain values for antenna 1 and 2 or 1 to 4 for more recent sprom versions. On old devices antenna 2 was used for 5 GHz wifi. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ssb: sprom fix some sizes / signednessHauke Mehrtens
Some parts of the sprom struct are bigger than needed. The leddc and maxpwr values are just 8 bit long and not 16. rxpo2g and rxpo5g are signed I got these information for the open source part of the Broadcom SDK covering sprom version 1 to 9. rxpo2g contained a negative number on my bcm5354 based device, this cased an error and Broadcom SDK says this is signed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ath9k: fix drv_tx_last_beacon on AR9003 by processing beacon tx statusFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ath9k_hw: enable interrupts for beacon tx completion eventsFelix Fietkau
Not doing so could cause the tx status queue to overflow during longer periods of time without non-beacon tx. These events are also required for proper drv_tx_last_beacon handling. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05ath9k: do not call ath9k_hw_txprocdesc on AR9003 outside of the tx taskletFelix Fietkau
Since AR9003 uses a global tx status queue, processing tx status outside of the regular tx tasklet is dangerous and messes up hardware/software synchronization of tx status events. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05Revert "ath9k_hw: Fix false tx hung detection in AR9003 chips"Felix Fietkau
The approach of this change is flawed, as it triggers tx status processing from more callsites, yet the chips only have one global tx status queue. Subsequent patches will properly fix the issue that this one tried to address. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mwifiex: handle auto authentication mode correctlyAmitkumar Karwar
When authentication type is configured to NL80211_AUTHTYPE_AUTOMATIC, driver tries to connect using open mode. The association is failed if AP is configured in shared mode. This patch adds code to try association using shared mode as well if open mode association fails. Now since we returned exact error code in association response handler (instead of -1), corresponding changes are done in mwifiex_process_cmdresp(). Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-03-05iwlwifi: fix wowlan suspendJohannes Berg
This was broken by the commit 023ca58f1 "iwlwifi: Move the core suspend function to iwl-agn-lib" where for some reason the code changed while moving, from .len[0] = sizeof(*key_data.rsc_tsc), to .len[0] = sizeof(key_data.rsc_tsc), Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05Merge remote branch 'wireless-next/master' into ath6kl-nextKalle Valo
Conflicts: drivers/net/wireless/ath/ath6kl/cfg80211.c
2012-03-05ath6kl: Restrict memcpy to bounce buffer only for write requestRaja Mani
No need to copy received local buffer content to bounce buffer (DMA buffer) while performing sync READ operation from the chip. It's applicable for only WRITE operation. Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-05Merge tag 'mmc-fixes-for-3.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc MMC fixes from Chris Ball for 3.3: - atmel-mci: oops fix against regression introduced in 3.2 - core: power saving regression fix against 3.3-rc1 - core: suspend/resume fix for UHS-I cards - esdhc-imx: MMC card regression fix against 3.0 - mmci: oops fix for ARM systems with large (64k) pages - MAINTAINERS update for atmel-mci. * tag 'mmc-fixes-for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: mmc: core: Fixup suspend/resume issues for UHS-I cards mmc: mmci: reduce max_blk_count to avoid overflowing max_req_size mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5 mmc: core: fix regression: set default clock gating delay to 0 MAINTAINERS: hand over atmel-mci (sd/mmc interface) mmc: atmel-mci: don't use dma features when using DMA with no chan available
2012-03-05Merge branch 'upstream-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull from Jiri Kosina: "Please pull to receive updates for HID layer. Nikolai's patch is rather important and should still go in for 3.3, as it's a regression fix for commit b4b583d." * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-input: allow array fields out of range HID: usbhid: Add NOGET quirk for the AIREN Slim+ keyboard
2012-03-05ARM: OMAP: fix iommu, not mailboxOhad Ben-Cohen
For some weird (freudian?) reason, commit 435792d "ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp" unintentionally changed the mailbox's initcall instead of the iommu's. Fix that. Reported-by: Fernando Guzman Lugo <fernando.lugo@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Joerg Roedel <Joerg.Roedel@amd.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-03-05drm/gma500: Fix Cedarview boot failures in 3.3-rcAlan Cox
Production GMA3600/3650 hardware turns out to be subtly different to the development platforms. This combined with a minor driver bug is causing the kernel to hang on these platforms. This patch does the following - turn down a couple of messages that were meant to be debug and are causing much confusion - ensure the hotplug interrupt is disabled on Cedartrail systems. - fix a bug where gtt roll mode called psbfb_sync, which tries to sync the 2D engine. On other devices it is harmless as the 2D engine is present but not in use when in gtt roll mode, on Cedartrail it causes a hang Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-05wl12xx: print the tx packet lenEliad Peller
Add the packet length to the tx debug print. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05wl12xx: avoid bug_on_recovery during fw switchEliad Peller
Add a flag to indicate we initiated a recovery work on purpose, in order to avoid triggering BUG() (when the bug_on_recovery module param was set). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05wl12xx: configure the correct beacon_intervalEliad Peller
We didn't update the beacon interval on association (or on a change notification when working as sta), so the default interval (100ms) was always used. Update the beacon interval according to the bss_conf before starting the sta role (on association). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05wl12xx: don't allow scanning while device is in ROCEliad Peller
return EBUSY on scan when there is any role in ROC (not necessarily the one we are going to use) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05wl12xx: don't handle change_channel while associatedEliad Peller
Currently, CHANGE_CHANNEL indication while associated is considered as roaming attempt. However, with the new auth/assoc redesign, we no longer have to handle this case, so remove it. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05wl12xx: set correct vif type in change_interface callbackEliad Peller
In some cases, the wrong vif type was set in the change_interface callback (P2P_CLIENT/P2P_GO instead of STA/AP) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05wl12xx: increment session_counter for device role as wellEliad Peller
The sesssion_counter has to be incremented each time the dev is started (similar to sta role). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05wl12xx: set authorized AP on sta_state notificationEliad Peller
wl12xx currently looks for AP authorization by registering a netdev notifier and waiting for the IF_OPER_UP notification, which is quite cumbersome. Use the newly introduced sta_state callback (waiting for assoc -> auth notification) instead, in order to simplify it. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
generated by cgit (git 2.34.1) at 2025-09-14 17:06:46 +0000