summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-21x86, alternative: Add header guards to <asm/alternative-asm.h>H. Peter Anvin
Add header guards to protect <asm/alternative-asm.h> against multiple inclusion. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1348256595-29119-6-git-send-email-hpa@linux.intel.com
2012-09-21x86, alternative: Use .pushsection/.popsectionH. Peter Anvin
.section/.previous doesn't nest. Use .pushsection/.popsection in <asm/alternative.h> so that they can be properly nested. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1348256595-29119-5-git-send-email-hpa@linux.intel.com
2012-09-21x86, smap: Add CR4 bit for SMAPH. Peter Anvin
Add X86_CR4_SMAP to <asm/processor-flags.h>. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1348256595-29119-4-git-send-email-hpa@linux.intel.com
2012-09-21x86-32, mm: The WP test should be done on a kernel pageH. Peter Anvin
PAGE_READONLY includes user permission, but this is a page used exclusively by the kernel; use PAGE_KERNEL_RO instead. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1348256595-29119-3-git-send-email-hpa@linux.intel.com
2012-09-21netlink: use <linux/export.h> instead of <linux/module.h>Pablo Neira Ayuso
Since (9f00d97 netlink: hide struct module parameter in netlink_kernel_create), linux/netlink.h includes linux/module.h because of the use of THIS_MODULE. Use linux/export.h instead, as suggested by Stephen Rothwell, which is significantly smaller and defines THIS_MODULES. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21Merge tag 'for-linus-v3.6-rc7' of git://oss.sgi.com/xfs/xfsLinus Torvalds
Pull xfs bugfixes from Ben Myers: - fix a regression related to xfs_sync_worker racing with unmount. - fix a race while discarding xfs buffers. * tag 'for-linus-v3.6-rc7' of git://oss.sgi.com/xfs/xfs: xfs: stop the sync worker before xfs_unmountfs xfs: fix race while discarding buffers [V4]
2012-09-21Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Fixes for big 3 drivers: nouveau: revert earlier MBP fix, put a dmi based MBP fix in its place (fixes a regression we found on some Dell eDP panels doing some internal testing) radeon: revert pll fixes, real fix is too invasive, fix scratch leak intel: 3 minor fixes, one for HDMI audio." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: add dmi quirk for gpio reset drm/radeon: Prevent leak of scratch register on resume from suspend Revert "drm/nv50-/gpio: initialise to vbios defaults during init" Revert "drm/radeon: rework pll selection (v3)" drm/i915: HDMI - Clear Audio Enable bit for Hot Plug drm/i915: Reduce a pin-leak BUG into a WARN drm/i915: enable lvds pin pairs before dpll on gen2
2012-09-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Updates for the input subsystem. Just a few driver updates mostly dealing with recent regressions." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: edt-ft5x06 - return -EFAULT on copy_to_user() error Input: sentelic - filter out erratic movement when lifting finger Input: ambakmi - [un]prepare clocks when enabling amd disabling Input: i8042 - disable mux on Toshiba C850D Revert "input: ab8500-ponkey: Create AB8500 domain IRQ mapping" Input: imx_keypad - fix missing clk conversions Input: usbtouchscreen - initialize eGalax devices
2012-09-21Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fixes from Wim Van Sebroeck: "Fix a kdump issue in hpwdt and a possible NULL dereference." * git://www.linux-watchdog.org/linux-watchdog: watchdog: move the dereference below the NULL test hpwdt: Fix kdump issue in hpwdt
2012-09-21Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Add missing 'name' sysfs attributes to ad7314 and ads7871 drivers - Bump maximum wait time for applesmc driver (again) - Fix build warning seen with W=1 in include/linux/kernel.h, introduced with commit b6d86d3d6d6e ("Fix DIV_ROUND_CLOSEST to support negative dividends") * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: linux/kernel.h: Fix warning seen with W=1 due to change in DIV_ROUND_CLOSEST hwmon: (applesmc) Bump max wait hwmon: (ad7314) Add 'name' sysfs attribute hwmon: (ads7871) Add 'name' sysfs attribute
2012-09-21sunbmac: Remove unused local variable.David S. Miller
Commit eb716c54b1c71ad28ab20461bff831bd481066c4 ("sunbmac: remove unnecessary setting of skb->dev") caused the local varible 'dev' in bigmac_init_rings to become unused. And now the compiler warns about it. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "There are two trivial fixes in pl330 driver and two in at_hdmac driver." * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: DMA: PL330: Check the pointer returned by kzalloc DMA: PL330: Fix potential NULL pointer dereference in pl330_submit_req() dmaengine: at_hdmac: check that each sg data length is non-null dmaengine: at_hdmac: fix comment in atc_prep_slave_sg()
2012-09-21Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc bug fixes from Olof Johansson: "A couple of samsung clock locking fixes, at91 device tree gpio configuration fix and a couple more for shmobile and i.MX. All small targeted fixes." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM i.MX25: Make timer irq work again ARM: imx: armadillo5x0: Fix illegal register access ARM: shmobile: kzm9g: bugfix: correct mmcif interrupt settings ARM: SAMSUNG: Use spin_lock_{irqsave,irqrestore} in clk_set_rate ARM: at91: fix missing #interrupt-cells on gpio-controller ARM: SAMSUNG: use spin_lock_irqsave() in clk_set_parent
2012-09-21sparc: fix the return value of module_alloc()Wei Yongjun
In case of error, function module_alloc() in other platform never returns ERR_PTR(), and all of the user only check for NULL, so we'd better return NULL instead of ERR_PTR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21sparc32: Enable the relocation target R_SPARC_DISP32 for sparc32Andreas Larsson
GNU Binutils 2.20.1 generates .eh_frame sections that uses R_SPARC_DISP32. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Bug fixes for 3.6-rc7, including some important patches for large page related memory management issues." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: fix read unit address configuration loop s390/dasd: fix pathgroup race s390/mm: fix user access page-table walk code s390/hwcaps: do not report high gprs for 31 bit kernel s390/cio: invalidate cdev pointer before deregistration s390/cio: fix IO subchannel event race s390/dasd: move wake_up call s390/hugetlb: use direct TLB flushing for hugetlbfs pages s390/mm: fix deadlock in unmap_hugepage_range()
2012-09-21drivers/sbus/char: removes unnecessary semicolonPeter Senna Tschudin
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21arch/sparc/kernel/pci_sun4v.c: removes unnecessary semicolonPeter Senna Tschudin
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21Merge tag 'stable/for-linus-3.6-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - Fix M2P batching re-using the incorrect structure field. In v3.5 we added batching for M2P override (Machine Frame Number -> Physical Frame Number), but the original MFN was saved in an incorrect structure - and we would oops/restore when restoring with the old MFN. - Disable BIOS SMP MP table search. A bootup issue that we had ignored until we found that on DL380 G6 it was needed. * tag 'stable/for-linus-3.6-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/boot: Disable BIOS SMP MP table search. xen/m2p: do not reuse kmap_op->dev_bus_addr
2012-09-21sparc64: Fix function argument comment in camellia_sparc64_key_expand asm.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21team: send port changed when addedJiri Pirko
On some hw, link is not up during adding iface to team. That causes event not being sent to userspace and that may cause confusion. Fix this bug by sending port changed event once it's added to team. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21net/stmmac: Use clk_prepare_enable and clk_disable_unprepareStefan Roese
This patch fixes an issue introduced by commit ID 6a81c26f [net/stmmac: remove conditional compilation of clk code], which switched from the internal stmmac_clk_{en}{dis}able calls to clk_{en}{dis}able. By this, calling clk_prepare and clk_unprepare was removed. clk_{un}prepare is mandatory for platforms using common clock framework. Since these drivers are used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for them. Otherwise the clocks are not correctly en-/disabled and ethernet support doesn't work. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21ipconfig: add nameserver IPs to kernel-parameter ip=Christoph Fritz
On small systems (e.g. embedded ones) IP addresses are often configured by bootloaders and get assigned to kernel via parameter "ip=". If set to "ip=dhcp", even nameserver entries from DHCP daemons are handled. These entries exported in /proc/net/pnp are commonly linked by /etc/resolv.conf. To configure nameservers for networks without DHCP, this patch adds option <dns0-ip> and <dns1-ip> to kernel-parameter 'ip='. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Tested-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21debugfs: fix u32_array race in format_array_allocLinus Torvalds
The format_array_alloc() function is fundamentally racy, in that it prints the array twice: once to figure out how much space to allocate for the buffer, and the second time to actually print out the data. If any of the array contents changes in between, the allocation size may be wrong, and the end result may be truncated in odd ways. Just don't do it. Allocate a maximum-sized array up-front, and just format the array contents once. The only user of the u32_array interfaces is the Xen spinlock statistics code, and it has 31 entries in the arrays, so the maximum size really isn't that big, and the end result is much simpler code without the bug. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-21net: change return values from -EACCES to -EPERMZhao Hongjiang
Change return value from -EACCES to -EPERM when the permission check fails. Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21Merge branch 'fixes-for-3.6' of git://gitorious.org/linux-can/linux-canDavid S. Miller
Marc Kleine-Budde says: ==================== two patches for the v3.6 release cycle. Ira W. Snyder fixed support for the older version of the Janz CMOD-IO Carrier Board. I found and fixed an oops in the ti_hecc driver, which occurs when removing the module if the network interface is still open. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21net/irda: sh_sir: fix return value check in sh_sir_set_baudrate()Wei Yongjun
In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21stmmac: fix return value check in stmmac_open_ext_timer()Wei Yongjun
In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21gianfar: fix phc index build failureRichard Cochran
This patch fixes a build failure introduced in commit 66636287 ("gianfar: Support the get_ts_info ethtool method."). Not only was a global variable inconsistently named, but also it was not exported as it should have been. This fix is also needed in stable version 3.5. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21ipv6: fix return value check in fib6_add()Wei Yongjun
In case of error, the function fib6_add_1() returns ERR_PTR() or NULL pointer. The ERR_PTR() case check is missing in fib6_add(). dpatch engine is used to generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21debugfs: fix race in u32_array_read and allocate array at openDavid Rientjes
u32_array_open() is racy when multiple threads read from a file with a seek position of zero, i.e. when two or more simultaneous reads are occurring after the non-seekable files are created. It is possible that file->private_data is double-freed because the threads races between kfree(file->private-data); and file->private_data = NULL; The fix is to only do format_array_alloc() when the file is opened and free it when it is closed. Note that because the file has always been non-seekable, you can't open it and read it multiple times anyway, so the data has always been generated just once. The difference is that now it is generated at open time rather than at the time of the first read, and that avoids the race. Reported-by: Dave Jones <davej@redhat.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Raghavendra <raghavendra.kt@linux.vnet.ibm.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-21bnx2x: remove false warning regarding interrupt numberAriel Elior
Since version 7.4 the FW configures in the pci config space the max number of interrupts available to the physical function, instead of the exact number to use. This causes a false warning in driver when comparing the number of configured interrupts to the number about to be used. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200Bjørn Mork
One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) <fangxiaozhi@huawei.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Cc: Dan Williams <dcbw@redhat.com> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21serial: omap: Remove unnecessary checks from suspend/resumeSourav Poddar
Drop the check for "up" being valid on suspend/resume callbacks. It should be valid always. Get rid of the "pdata" check also as serial_omap_get_context_loss_count() checks for it. Tested on omap4 panda and 3630 based Beagle board. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21Merge branch 'pci/yinghai-revert-pci_find_bus-and-remove-cleanup' into nextBjorn Helgaas
* pci/yinghai-revert-pci_find_bus-and-remove-cleanup: PCI: Stop all children first, before removing all children Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()"
2012-09-21ARM: reserve syscall 378 for kcmpRussell King
kcmp has appeared on x86, but has not been noticed because checksyscalls.sh is broken at the moment. Reserve ARM syscall 378 for this should we ever need it, and add an __IGNORE entry for this unimplemented syscall. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-21serial: imx: remove null check of sport in suspend/resume functionRichard Zhao
platform_get_drvdata always retrun a valid value after probe succeed. It also fixed smatch warnings: drivers/tty/serial/imx.c:1376 serial_imx_suspend() warn: variable dereferenced before check 'sport' (see line 1372) drivers/tty/serial/imx.c:1392 serial_imx_resume() warn: variable dereferenced before check 'sport' (see line 1388) Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21serial: imx: set sport as drvdata, like it's used elsewhereRichard Zhao
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-218250: fix autoconfig to work with serial consoleFlavio Leitner
The autoconfig prints messages while holding the port's spinlock and that causes a deadlock when using serial console. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21pty: Fix locking bug on error pathAlan Cox
We end up dropping the mutex twice on some errors. We don't want to do that. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21serial_core: Fix race in uart_handle_dcd_changeAlan Cox
If a serial driver is called post hangup with a second DCD event then we will attempt to get the ldisc of NULL. Check we have a tty before trying to do anything with it. This is still only safe within the uart layer if the caller holds the relevant uart locks. We could do with a version where the tty is passed for more general use. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21compat_ioctl: Add RS-485 IOCTLs to the listJaeden Amero
The RS-485 TIOCSRS485 and TIOCGRS485 ioctls are 32-bit compatible, so in order to call them on 64-bit systems from 32-bit user mode, we add them to the ioctl pointer list as compatible ioctls. Signed-off-by: Jaeden Amero <jaeden.amero@ni.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21USB: sierra_ms: don't keep unused variableAlan Cox
We need to call scsi_get_host_dev(sh) but we never use the return nor do we have any reason to check it. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21vfio: Fix virqfd release raceAlex Williamson
vfoi-pci supports a mechanism like KVM's irqfd for unmasking an interrupt through an eventfd. There are two ways to shutdown this interface: 1) close the eventfd, 2) ioctl (such as disabling the interrupt). Both of these do the release through a workqueue, which can result in a segfault if two jobs get queued for the same virqfd. Fix this by protecting the pointer to these virqfds by a spinlock. The vfio pci device will therefore no longer have a reference to it once the release job is queued under lock. On the ioctl side, we still flush the workqueue to ensure that any outstanding releases are completed. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2012-09-21vfio: Trivial Documentation correctionAlex Williamson
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2012-09-21fsl/usb: Add support for USB controller version 2.4Ramneek Mehresh
Add support for USB controller version 2.4 Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21USB: qcaux: add Pantech vendor class matchBjørn Mork
The three Pantech devices UML190 (106c:3716), UML290 (106c:3718) and P4200 (106c:3721) all use the same subclasses to identify vendor specific functions. Replace the existing device specific entries with generic vendor matching, adding support for the P4200. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Cc: Thomas Schäfer <tschaefer@t-online.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21USB: option: blacklist QMI interface on ZTE MF683Bjørn Mork
Interface #5 on ZTE MF683 is a QMI/wwan interface. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21USB: EHCI: convert warning messages to debug-levelAlan Stern
This patch (as1606) converts two warning messages in the ehci-hcd driver to debug messages, and adds a little extra information to each. The log messages occur when an EHCI controller takes too long (more than 20 ms) to turn its async or periodic schedule on or off. If this happens at all, it's liable to happen quite often and there's no point spamming the system log with these warnings. Furthermore, there's nothing much we can do about it when the problem happens. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Thomas Voegtle <tv@lio96.de> Cc: stable <stable@vger.kernel.org> # [3.6] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-21USB: EHCI: remove useless testAlan Stern
This patch (as1605) removes a useless test from the EHCI debugfs code. There's no point checking whether p.qh is non-NULL; we already know it is and in any case it gets dereferenced aerlier in the function. The useless test was identified by smatch. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>