summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-14net: netlink: rename NETLINK_DUMP_STRICT_CHK -> NETLINK_GET_STRICT_CHKJakub Kicinski
NETLINK_DUMP_STRICT_CHK can be used for all GET requests, dumps as well as doit handlers. Replace the DUMP in the name with GET make that clearer. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-14Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux mlx5-next shared branch with rdma subtree to avoid mlx5 rdma v.s. netdev conflicts. Highlights: 1) Lag refactroing and flow counter affinity bits. 2) mlx5 core cleanups By Roi Dayan (2) and others * 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5: Fold the modify lag code into function net/mlx5: Add lag affinity info to log net/mlx5: Split the activate lag function into two routines net/mlx5: E-Switch, Introduce flow counter affinity IB/mlx5: Unify e-switch representors load approach between uplink and VFs net/mlx5: Use lowercase 'X' for hex values net/mlx5: Remove duplicated include from eswitch.c Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14net/mlx5: Fold the modify lag code into functionShahar Klein
Handle the code of modifying the lag affinity within a separate function. Signed-off-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14net/mlx5: Add lag affinity info to logRoi Dayan
Report the initial LAG port affinity upon LAG creation. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14net/mlx5: Split the activate lag function into two routinesRoi Dayan
Split the activate lag function in order to be symmetric with the deactivate lag function. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14net/mlx5: E-Switch, Introduce flow counter affinityShahar Klein
This dictates the device affinity for eswitch flow counters, set by the FW according to the HW device capabilities. Under "source eswitch" affinity, the counter should be allocated on the device related to the source vport in the match. This covers both non merged e-switch mode as well as old FW that does not advertise this cap. Under "flow eswitch" affinity, the counter should be allocated on the device where the eswitch rule is set. Signed-off-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14IB/mlx5: Unify e-switch representors load approach between uplink and VFsMark Bloch
When in switchdev mode and the add function is called by the core level driver, make sure we only register the callbacks, but don't create the mlx5 IB device or initialize anything. With this change all the IB devices in switchdev mode are created only once the load callback is invoked by the e-switch core sub-module. This follows the design paradigm under which the all the Eth representors must be loaded before any of IB reprs is loaded. Signed-off-by: Mark Bloch <markb@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14net/mlx5: Use lowercase 'X' for hex valuesSaeed Mahameed
Apparently gcc is cool with upper case '0X' but it is not commonly used. Replace '0X' with lowercase '0x' in mlx5_ifc.h file. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-14Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Invalidate the caches before clearing the DMA buffer via the non-cacheable alias in the FORCE_CONTIGUOUS case" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: dma-mapping: Fix FORCE_CONTIGUOUS buffer clearing
2018-12-14Merge tag 'powerpc-4.20-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One notable fix for our change to split pt_regs between user/kernel, we forgot to update BPF to use the user-visible type which was an ABI break for BPF programs. A slightly ugly but minimal fix to do_syscall_trace_enter() so that we use tracehook_report_syscall_entry() properly. We'll rework the code in next to avoid the empty if body. Seven commits fixing bugs in the new papr_scm (Storage Class Memory) driver. The driver was finally able to be tested on the other hypervisor which exposed several bugs. The fixes are all fairly minimal at least. Fix a crash in our MSI code if an MSI-capable device is plugged into a non-MSI capable PHB, only seen on older hardware (MPC8378). Fix our legacy serial code to look for "stdout-path" since the device trees were updated to use that instead of "linux,stdout-path". A change to the COFF zImage code to fix booting old powermacs. A couple of minor build fixes. Thanks to: Benjamin Herrenschmidt, Daniel Axtens, Dmitry V. Levin, Elvira Khabirova, Oliver O'Halloran, Paul Mackerras, Radu Rendec, Rob Herring, Sandipan Das" * tag 'powerpc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/ptrace: replace ptrace_report_syscall() with a tracehook call powerpc/mm: Fallback to RAM if the altmap is unusable powerpc/papr_scm: Use ibm,unit-guid as the iset cookie powerpc/papr_scm: Fix DIMM device registration race powerpc/papr_scm: Remove endian conversions powerpc/papr_scm: Update DT properties powerpc/papr_scm: Fix resource end address powerpc/papr_scm: Use depend instead of select powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT powerpc/boot: Fix build failures with -j 1 powerpc: Look for "stdout-path" when setting up legacy consoles powerpc/msi: Fix NULL pointer access in teardown code powerpc/mm: Fix linux page tables build with some configs powerpc: Fix COFF zImage booting on old powermacs
2018-12-14PCI/AER: Queue one GHES event, not several uninitialized onesYanjiang Jin
ecae65e133f2 ("PCI/AER: Use kfifo_in_spinlocked() to insert locked elements") replaced kfifo_put() with kfifo_in_spinlocked(), but passed the *size* of the queue entry, where kfifo_in_spinlocked() expects the *number* of entries to be copied. We want to insert only one element into kfifo, not "sizeof(entry) = 16". Without this patch, we would get 15 uninitialized elements. Fixes: ecae65e133f2 ("PCI/AER: Use kfifo_in_spinlocked() to insert locked elements") Signed-off-by: Yanjiang Jin <yanjiang.jin@hxt-semitech.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-12-14Merge tag 'ceph-for-4.20-rc7' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fix from Ilya Dryomov: "Luis discovered a problem with the new copyfrom offload on the server side. Disable it for now" * tag 'ceph-for-4.20-rc7' of https://github.com/ceph/ceph-client: ceph: make 'nocopyfrom' a default mount option
2018-12-14Merge tag 'pinctrl-v4.20-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Three pin control fixes for the v4.20 series. Just odd drivers, so nothing particularly interesting: - Set the tile property on Qualcomm SDM60. - Fix up enable register calculation for the Meson - Fix an IRQ offset on the Sunxi (Allwinner)" * tag 'pinctrl-v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11 pinctrl: meson: fix pull enable register calculation pinctrl: sdm660: Set tile property for pingroups
2018-12-14Merge tag 'drm-fixes-2018-12-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "While I hoped things would calm down, the world hasn't joined with me, but it's a few things scattered over a wide area. The i915 workarounds regression fix is probably the largest, the rest are more usual sized. We also get some new AMD PCI IDs. There is also a patch in here to MAINTAINERS to added Daniel as an official DRM toplevel co-maintainer, he's decided he wants to step up and share the glory, and he'll likely process next weeks fixes while I'm away on holidays. Summary: amdgpu: - some new PCI IDs - fixed firmware image updates - power management fixes - locking warning fix nouveau: - framebuffer flushing fix - memory leak fix - tegra device init regression fix vmwgfx: - OOM kernel memory fix - excess return in function fix i915: - the biggest fix is a regression fix where workarounds weren't getting reapplied after a gpu hang causing further crashing, this fixes the workaround application to make it happen again - GPU hang fixes for Braswell and some GEN3 GPUs - GVT fix for broadwell tiling rockchip: - revert to fix a regression causing a WARN on shutdown mediatek: - avoid crash attaching to non-existant bridges" * tag 'drm-fixes-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (23 commits) drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3 MAINTAINERS: Daniel for drm co-maintainer drm/amdgpu: drop fclk/gfxclk ratio setting drm/vmwgfx: remove redundant return ret statement drm/i915: Flush GPU relocs harder for gen3 drm/i915: Allocate a common scratch page drm/i915/execlists: Apply a full mb before execution for Braswell drm/nouveau/kms: Fix memory leak in nv50_mstm_del() drm/nouveau/kms/nv50-: also flush fb writes when rewinding push buffer drm/amdgpu: Fix DEBUG_LOCKS_WARN_ON(depth <= 0) in amdgpu_ctx.lock Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec" drm/nouveau/drm/nouveau: tegra: Call nouveau_drm_device_init() drm/amdgpu/powerplay: Apply avfs cks-off voltages on VI drm/amdgpu: update SMC firmware image for polaris10 variants drm/amdkfd: add new vega20 pci id drm/amdkfd: add new vega10 pci ids drm/amdgpu: add some additional vega20 pci ids drm/amdgpu: add some additional vega10 pci ids drm/amdgpu: update smu firmware images for VI variants (v2) drm/i915: Introduce per-engine workarounds ...
2018-12-14Merge tag 'usb-serial-4.20-rc7' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 4.20-rc7 Here are some new modem device ids. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-4.20-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit LN940 series USB: serial: option: add Fibocom NL668 series USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode) USB: serial: option: add GosunCn ZTE WeLink ME3630 USB: serial: option: add HP lt4132
2018-12-14Merge tag 'iwlwifi-next-for-kalle-2018-12-14' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Third batch of iwlwifi patches intended for v4.21 * Some cleanups in the HW configuration structures; * More work on the debugging infrastructure; * Fixes related to 802.11ax; * Other cleanups and small fixes;
2018-12-14Merge tag 'hyperv-fixes-4.20-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux into char-misc-linus Sasha writes: hyperv-fixes-4.20-rc6 * tag 'hyperv-fixes-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels x86, hyperv: remove PCI dependency
2018-12-14xhci: Don't prevent USB2 bus suspend in state check intended for USB3 onlyMathias Nyman
The code to prevent a bus suspend if a USB3 port was still in link training also reacted to USB2 port polling state. This caused bus suspend to busyloop in some cases. USB2 polling state is different from USB3, and should not prevent bus suspend. Limit the USB3 link training state check to USB3 root hub ports only. The origial commit went to stable so this need to be applied there as well Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-14iwlwifi: mvm: don't check if a pointer is set if it can't be unsetEmmanuel Grumbach
We used to have many versions of statistics notification coming from the firmware. In one of the cleanup patches, we forgot to clean the code that checks if data->general is set. Since it is always set, remove the check. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: pcie: set cmd_len in the correct placeSara Sharon
command len is set too early in the code, since when building AMSDU, the size changes. This causes the byte count table to have the wrong size. Fixes: a0ec0169b7a9 ("iwlwifi: support new tx api") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: mvm: radiotap: remove UL_DL bit in HE TRIG_BASEDShaul Triebitz
UL_DL is irrelevant to HE TRIG_BASED PPDU. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: mvm: add L-SIG length to radiotapShaul Triebitz
We may have the L-SIG length depending on the phy_data info type; add it to radiotap when we do. Move getting the phy_data out one layer up and the info type into it so we can use this data more generically. We need to call the iwl_mvm_rx_he() function for other reasons as well, so can't just combine all of that into something like iwl_mvm_parse_phy_data(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: mvm: change PHY data RX for HE radiotapShaul Triebitz
The firmware changed the PHY data API, so follow suit. Some data is now available even for HT/VHT frames, so the info type in the metadata was changed. This change isn't backwards compatible, but 1) the firmware with the old API was never released; 2) the only overlap in the info type field is from the old type of TB to the new of HT, so this basically just means that with older FW and newer driver the data will be considered missing. While at it, remove the extra code to set the LTF syms corresponding to the streams and use the data from the device instead - we don't really need this in any case other than when we have it from the device. As the new API gives use the spatial reuse 1-4 fields for trigger-based PPDUs, also expose that to radiotap. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: pcie: fix erroneous printSara Sharon
When removing the driver, the following flow can happen: 1. host command is in progress, for example at index 68. 2. RX interrupt is received with the response. 3. Before it is processed, the remove flow kicks in, and calls iwl_pcie_txq_unmap. The function cleans all DMA, and promotes the read pointer to 69. 4. RX thread proceeds with the processing, and is calling iwl_pcie_cmdq_reclaim, which will print this error: iwl_pcie_cmdq_reclaim: Read index for DMA queue txq id (0), index 4 is out of range [0-256] 69 69. Detect this situation, and avoid the print. Change it to warning while at it, to make such issues more noticeable in the future. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: mvm: force TCM re-evaluation on TCM resumeAvraham Stern
When traffic load is not low or low latency is active, TCM schedules re-evaluation work so in case traffic stops TCM will detect that traffic load has become low or that low latency is no longer active. However, if TCM is paused when the re-evaluation work runs, it does not re-evaluate and the re-evaluation work is no longer scheduled. As a result, TCM will not indicate that low latency is no longer active or that traffic load is low when traffic stops. Fix this by forcing TCM re-evaluation when TCM is resumed in case low latency is active or traffic load is not low. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: remove all unnecessary occurrences of nvm_calib_verLuca Coelho
Now that nvm_calib_ver is not checked in opmodes other than dvm, we can remove it from all irrelevant configurations. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: move iwl_nvm_check_version() into dvmLuca Coelho
This function is only half-used by mvm (i.e. only the nvm_version part matters, since the calibration version is irrelevant), so it's pointless to export it from iwlwifi. If mvm uses this function, it has the additional complexity of setting the calib version to a bogus value on all cfg structs. To avoid this, move the function to dvm and make a simple comparison of the nvm_version in mvm instead. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: remove useless NVM_HW_SECTION_NUM_FAMILY_* macrosLuca Coelho
These macros are useless because each one of them is used only once and the element they are assigned to is already pretty clear about what they mean, "nvm_hw_section_num". Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: don't define OTP_LOW_IMAGE_SIZE per family, but per sizeLuca Coelho
Using OTP_LOW_IMAGE_SIZE_FAMILY_8000/9000/22000 only obfuscates the actual values, since these 3 are the same. Redefine the values per size so it's easier to understand and compare the different configurations. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: mvm: activate apply pointsSara Sharon
Call the previously introduced apply points entry point when reaching an apply point. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: add support for triggering ini triggersSara Sharon
Add support for ini triggers. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: dbg: dump data according to the new ini TLVsSara Sharon
When ini TLVs are loaded, dump data according to the stored configuration. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: move common 9000 cfg parameters to common macroLuca Coelho
The ht_params, nvm_ver, nvm_calib_ver and max_ht_ampdu_exponent elements in 9000 devices are always the same. Move them to the common macro. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-13qed: Fix command number mismatch between driver and the mfwSudarsana Reddy Kalluru
The value for OEM_CFG_UPDATE command differs between driver and the Management firmware (mfw). Fix this gap with adding a reserved field. Fixes: cac6f691546b ("qed: Add support for Unified Fabric Port.") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13Merge tag 'mlx5-fixes-2018-12-13' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-fixes-2018-12-13 Subject: [pull request][net 0/9] Mellanox, mlx5 fixes 2018-12-13 Saeed Mahameed says: ==================== This series introduces some fixes to the mlx5 core and mlx5e netdevice driver. ======= Conflict with net-next: When merged with net-next this series will cause a moderate conflict: 1) in drivers/net/ethernet/mellanox/mlx5/core/en_tc.c (2 hunks) Take hunks from net only and just replace *attr->mirror_count to *attr->split_count 1.1) there is one more instance of slow_attr->mirror_count to be replaced with slow_attr->split_count, it doesn't appear in the conflict, it will cause a compilation error if left out. 2) in mlx5_ifc.h, take hunks only from net. Example for the merge resolution can be found at: https://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git/commit/?h=merge/mlx5-fixes&id=48830adf29804d85d77ed8a251d625db0eb5b8a8 branch merge/mlx5-fixes of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux (I simply merged this pull request tag into net-next and resolved the conflict) I don't know if it's ok with you, but to save your time, you can just: git pull git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux merge/mlx5-fixes Into net-next, before your next net merge, and you will have a clean merge of net into net-next (at least for mlx5 files). ====== Please pull and let me know if there's any problem. For -stable v4.18 338d615be484 ('net/mlx5e: Cancel DIM work on close SQ') 91f40f9904ad ('net/mlx5e: RX, Verify MPWQE stride size is in range') For -stable v4.19 c5c7e1c41bbe ('net/mlx5e: Remove unused UDP GSO remaining counter') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13Merge branch 'Introduce-NETDEV_PRE_CHANGEADDR'David S. Miller
Petr Machata says: ==================== Introduce NETDEV_PRE_CHANGEADDR Spectrum devices have a limitation that all router interfaces need to have the same address prefix. In Spectrum-1, the requirement is for the initial 38 bits of all RIFs to be the same, in Spectrum-2 the limit is 36 bits. Currently violations of this requirement are not diagnosed. At the same time, if the condition is not upheld, the mismatched MAC address ends up overwriting the common prefix, and all RIF MAC addresses silently change to the new prefix. It is therefore desirable to be able at least to diagnose the issue, and better to reject attempts to change MAC addresses in ways that is incompatible with the device. Currently MAC address changes are notified through emission of NETDEV_CHANGEADDR, which is done after the change. Extending this message to allow vetoing is certainly possible, but several other notification types have instead adopted a simple two-stage approach: first a "pre" notification is sent to make sure all interested parties are OK with the change that's about to be done. Then the change is done, and afterwards a "post" notification is sent. This dual approach is easier to use: when the change is vetoed, nothing has changed yet, and it's therefore unnecessary to roll anything back. Therefore this patchset introduces it for NETDEV_CHANGEADDR as well. One prominent path to emitting NETDEV_CHANGEADDR is through dev_set_mac_address(). Therefore in patch #1, give this function an extack argument, so that a textual reason for rejection (or a warning) can be communicated back to the user. In patch #2, add the new notification type. In patch #3, have dev.c emit the notification for instances of dev_addr change, or addition of an address to dev_addrs list. In patches #4 and #5, extend the bridge driver to handle and emit the new notifier. In patch #6, change IPVLAN to emit the new notifier. Likewise for bonding driver in patches #7 and #8. Note that the team driver doesn't need this treatment, as it goes through dev_set_mac_address(). In patches #9, #10 and #11 adapt mlxsw to veto MAC addresses on router interfaces, if they violate the requirement that all RIF MAC addresses have the same prefix. Finally in patches #12 and #13, add a test for vetoing of a direct change of a port device MAC, and indirect change of a bridge MAC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13selftests: mlxsw: Test FID RIF MAC vetoingPetr Machata
When a FID RIF is created for a bridge with IP address, its MAC address must obey the same requirements as other RIFs. Test that attempts to change the address incompatibly by attaching a device are vetoed with extack. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13selftests: mlxsw: Test RIF MAC vetoingPetr Machata
Test that attempts to change address in a way that violates Spectrum requirements are vetoed with extack. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13mlxsw: spectrum_router: Veto unsupported RIF MAC addressesPetr Machata
On NETDEV_PRE_CHANGEADDR, if the change is related to a RIF interface, verify that it satisfies the criterion that all RIF interfaces have the same MAC address prefix, as indicated by mlxsw_sp.mac_mask. Additionally, besides explicit address changes, check that the address of an interface for which a RIF is about to be added matches the required pattern as well. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13mlxsw: spectrum: Add mlxsw_sp.mac_maskPetr Machata
The Spectrum hardware demands that all router interfaces in the system have the same first 38 resp. 36 bits of MAC address: the former limit holds on Spectrum, the latter on Spectrum-2. Add a field that refers to the required prefix mask and initialize in mlxsw_sp1_init() and mlxsw_sp2_init(). Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13mlxsw: spectrum_router: Generalize mlxsw_sp_netdevice_router_port_event()Petr Machata
Prepare mlxsw_sp_netdevice_router_port_event() for handling of NETDEV_PRE_CHANGEADDR. Split out the part that deals with the actual changes and call it for the two events currently handled. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13net: bonding: Issue NETDEV_PRE_CHANGEADDRPetr Machata
Give interested parties an opportunity to veto an impending HW address change. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13net: bonding: Give bond_set_dev_addr() a return valuePetr Machata
Before NETDEV_CHANGEADDR, bond driver should emit NETDEV_PRE_CHANGEADDR, and allow consumers to veto the address change. To propagate further the return code from NETDEV_PRE_CHANGEADDR, give the function that implements address change a return value. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13net: ipvlan: Issue NETDEV_PRE_CHANGEADDRPetr Machata
A NETDEV_CHANGEADDR event implies a change of address of each of the IPVLANs of this IPVLAN device. Therefore propagate NETDEV_PRE_CHANGEADDR to all the IPVLANs. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13net: bridge: Handle NETDEV_PRE_CHANGEADDR from portsPetr Machata
When a port device seeks approval of a potential new MAC address, make sure that should the bridge device end up using this address, all interested parties would agree with it. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13net: bridge: Issue NETDEV_PRE_CHANGEADDRPetr Machata
When a port is attached to a bridge, the address of the bridge in question may change as well. Even if it would not change at this point (because the current bridge address is lower), it might end up changing later as a result of detach of another port, which can't be vetoed. Therefore issue NETDEV_PRE_CHANGEADDR regardless of whether the address will be used at this point or not, and make sure all involved parties would agree with the change. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13net: dev: Issue NETDEV_PRE_CHANGEADDRPetr Machata
When a device address is about to be changed, or an address added to the list of device HW addresses, it is necessary to ensure that all interested parties can support the address. Therefore, send the NETDEV_PRE_CHANGEADDR notification, and if anyone bails on it, do not change the address. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13net: dev: Add NETDEV_PRE_CHANGEADDRPetr Machata
The NETDEV_CHANGEADDR notification is emitted after a device address changes. Extending this message to allow vetoing is certainly possible, but several other notification types have instead adopted a simple two-stage approach: first a "pre" notification is sent to make sure all interested parties are OK with a change that's about to be done. Then the change is done, and afterwards a "post" notification is sent. This dual approach is easier to use: when the change is vetoed, nothing has changed yet, and it's therefore unnecessary to roll anything back. Therefore adopt it for NETDEV_CHANGEADDR as well. To that end, add NETDEV_PRE_CHANGEADDR and an info structure to go along with it. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13net: dev: Add extack argument to dev_set_mac_address()Petr Machata
A follow-up patch will add a notifier type NETDEV_PRE_CHANGEADDR, which allows vetoing of MAC address changes. One prominent path to that notification is through dev_set_mac_address(). Therefore give this function an extack argument, so that it can be packed together with the notification. Thus a textual reason for rejection (or a warning) can be communicated back to the user. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13Merge tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds
Pull XArray fixes from Matthew Wilcox: "Two bugfixes, each with test-suite updates, two improvements to the test-suite without associated bugs, and one patch adding a missing API" * tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix xa_alloc when id exceeds max XArray tests: Check iterating over multiorder entries XArray tests: Handle larger indices more elegantly XArray: Add xa_cmpxchg_irq and xa_cmpxchg_bh radix tree: Don't return retry entries from lookup
generated by cgit (git 2.34.1) at 2025-09-14 00:50:52 +0000