summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-14netfilter: ipset: replace a strncpy() with strscpy()Qian Cai
To make overflows as obvious as possible and to prevent code from blithely proceeding with a truncated string. This also has a side-effect to fix a compilation warning when using GCC 8.2.1. net/netfilter/ipset/ip_set_core.c: In function 'ip_set_sockfn_get': net/netfilter/ipset/ip_set_core.c:2027:3: warning: 'strncpy' writing 32 bytes into a region of size 2 overflows the destination [-Wstringop-overflow=] Signed-off-by: Qian Cai <cai@gmx.us> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-14netfilter: ipset: fix ip_set_byindex functionFlorent Fourcot
New function added by "Introduction of new commands and protocol version 7" is not working, since we return skb2 to user Signed-off-by: Victorien Molle <victorien.molle@wifirst.fr> Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-13selftests/bpf: Fix sk lookup usage in test_sock_addrAndrey Ignatov
Semantic of netns_id argument of bpf_sk_lookup_tcp and bpf_sk_lookup_udp was changed (fixed) in f71c6143c203. Corresponding changes have to be applied to all call sites in selftests. The patch fixes corresponding call sites in test_sock_addr test: pass BPF_F_CURRENT_NETNS instead of 0 in netns_id argument. Fixes: f71c6143c203 ("bpf: Support sk lookup in netns with id 0") Reported-by: Yonghong Song <yhs@fb.com> Signed-off-by: Andrey Ignatov <rdna@fb.com> Acked-by: Joe Stringer <joe@wand.net.nz> Tested-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13Merge tag 'linux-kselftest-4.20-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "A single fix for a seccomp test from Kees Cook." * tag 'linux-kselftest-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/seccomp: Remove SIGSTOP si_pid check
2018-12-13bpf: remove obsolete prog->aux sanitation in bpf_insn_prepare_dumpDaniel Borkmann
This logic is not needed anymore since we got rid of the verifier rewrite that was using prog->aux address in f6069b9aa993 ("bpf: fix redirect to map under tail calls"). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-13Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal fixes from Eduardo Valentin: "Fixes for STM and HISI thermal drivers" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: stm32: Fix stm_thermal_read_factory_settings thermal: stm32: read factory settings inside stm_thermal_prepare thermal/drivers/hisi: Fix number of sensors on hi3660 thermal/drivers/hisi: Fix wrong platform_get_irq_byname()
2018-12-13Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channelsDexuan Cui
Before 98f4c651762c, we returned zeros for unopened channels. With 98f4c651762c, we started to return random on-stack values. We'd better return -EINVAL instead. Fixes: 98f4c651762c ("hv: move ringbuffer bus attributes to dev_groups") Cc: stable@vger.kernel.org Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-13x86, hyperv: remove PCI dependencySinan Kaya
Need to be able to boot without PCI devices present. Signed-off-by: Sinan Kaya <okaya@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-14Merge branch 'vmwgfx-fixes-4.20' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes One regression fix for avoiding kernel OOM, one cleanup return fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181213122815.10581-1-thellstrom@vmware.com
2018-12-13USB: serial: option: add Telit LN940 seriesJörgen Storvist
Added USB serial option driver support for Telit LN940 series cellular modules. Covering both QMI and MBIM modes. usb-devices output (0x1900): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1900 Rev=03.10 S: Manufacturer=Telit S: Product=Telit LN940 Mobile Broadband S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option usb-devices output (0x1901): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 20 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1901 Rev=03.10 S: Manufacturer=Telit S: Product=Telit LN940 Mobile Broadband S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-13XArray: Fix xa_alloc when id exceeds maxMatthew Wilcox
Specifying a starting ID greater than the maximum ID isn't something attempted very often, but it should fail. It was succeeding due to xas_find_marked() returning the wrong error state, so add tests for both xa_alloc() and xas_find_marked(). Fixes: b803b42823d0 ("xarray: Add XArray iterators") Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-12-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Doug Ledford: "We have 5 small fixes for this pull request. One is a performance regression, so not necessarily strictly a fix, but it was small and reasonable and claimed to avoid thrashing in the scheduler, so I took it. The remaining are all legitimate fixes that match the "we take fixes any time" criteria. Summary: - One performance regression for hfi1 - One kasan fix for hfi1 - A couple mlx5 fixes - A core oops fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/core: Fix oops in netdev_next_upper_dev_rcu() IB/mlx5: Block DEVX umem from the non applicable cases IB/mlx5: Fix implicit ODP interrupted page fault IB/hfi1: Fix an out-of-bounds access in get_hw_stats IB/hfi1: Fix a latency issue for small messages
2018-12-13Merge tag 'mmc-v4.20-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull mmc fixes from Ulf Hansson: "MMC core: - Fixup RPMB requests to use mrq->sbc when sending CMD23 MMC host: - omap: Fix broken MMC/SD on OMAP15XX/OMAP5910/OMAP310 - sdhci-omap: Fix DCRC error handling during tuning - sdhci: Fixup the timeout check window for clock and reset" * tag 'mmc-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci: fix the timeout check window for clock and reset mmc: sdhci-omap: Fix DCRC error handling during tuning MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310 mmc: core: use mrq->sbc when sending CMD23 for RPMB
2018-12-13Merge tag 'sound-4.20-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Only usual suspects here: a few more fixups for Realtek HD-audio on various PCs, including a regression fix in the previous fix for Lenovo X1 Carbon, as well as a typo fix in the recent Fireface patch" * tag 'sound-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Enable audio jacks of ASUS UX433FN/UX333FA with ALC294 ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294 ALSA: hda/realtek: ALC294 mic and headset-mode fixups for ASUS X542UN ALSA: fireface: fix reference to wrong register for clock configuration ALSA: hda/realtek - Fix the mute LED regresion on Lenovo X1 Carbon ALSA: hda/realtek - Fixed headphone issue for ALC700
2018-12-13bpf: verifier: make sure callees don't prune with caller differencesJakub Kicinski
Currently for liveness and state pruning the register parentage chains don't include states of the callee. This makes some sense as the callee can't access those registers. However, this means that READs done after the callee returns will not propagate into the states of the callee. Callee will then perform pruning disregarding differences in caller state. Example: 0: (85) call bpf_user_rnd_u32 1: (b7) r8 = 0 2: (55) if r0 != 0x0 goto pc+1 3: (b7) r8 = 1 4: (bf) r1 = r8 5: (85) call pc+4 6: (15) if r8 == 0x1 goto pc+1 7: (05) *(u64 *)(r9 - 8) = r3 8: (b7) r0 = 0 9: (95) exit 10: (15) if r1 == 0x0 goto pc+0 11: (95) exit Here we acquire unknown state with call to get_random() [1]. Then we store this random state in r8 (either 0 or 1) [1 - 3], and make a call on line 5. Callee does nothing but a trivial conditional jump (to create a pruning point). Upon return caller checks the state of r8 and either performs an unsafe read or not. Verifier will first explore the path with r8 == 1, creating a pruning point at [11]. The parentage chain for r8 will include only callers states so once verifier reaches [6] it will mark liveness only on states in the caller, and not [11]. Now when verifier walks the paths with r8 == 0 it will reach [11] and since REG_LIVE_READ on r8 was not propagated there it will prune the walk entirely (stop walking the entire program, not just the callee). Since [6] was never walked with r8 == 0, [7] will be considered dead and replaced with "goto -1" causing hang at runtime. This patch weaves the callee's explored states onto the callers parentage chain. Rough parentage for r8 would have looked like this before: [0] [1] [2] [3] [4] [5] [10] [11] [6] [7] | | ,---|----. | | | sl0: sl0: / sl0: \ sl0: sl0: sl0: fr0: r8 <-- fr0: r8<+--fr0: r8 `fr0: r8 ,fr0: r8<-fr0: r8 \ fr1: r8 <- fr1: r8 / \__________________/ after: [0] [1] [2] [3] [4] [5] [10] [11] [6] [7] | | | | | | sl0: sl0: sl0: sl0: sl0: sl0: fr0: r8 <-- fr0: r8 <- fr0: r8 <- fr0: r8 <-fr0: r8<-fr0: r8 fr1: r8 <- fr1: r8 Now the mark from instruction 6 will travel through callees states. Note that we don't have to connect r0 because its overwritten by callees state on return and r1 - r5 because those are not alive any more once a call is made. v2: - don't connect the callees registers twice (Alexei: suggestion & code) - add more details to the comment (Ed & Alexei) v1: don't unnecessarily link caller saved regs (Jiong) Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)") Reported-by: David Beckett <david.beckett@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-13rtlwifi: rtl8821ae: remove set but not used variable 'type' in ↵YueHaibing
translate_rx_signal_stuff Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/trx.c: In function 'translate_rx_signal_stuff': drivers/net/wireless/realtek/rtlwifi/rtl8821ae/trx.c:309:6: warning: variable 'type' set but not used [-Wunused-but-set-variable] It never used since commit 21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13rtl818x: fix potential use after freePan Bian
entry is released via usb_put_urb just after calling usb_submit_urb. However, entry is used if the submission fails, resulting in a use after free bug. The patch fixes this. Signed-off-by: Pan Bian <bianpan2016@163.com> ACKed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13b43: remove set but not used variables 'tx_pwr_state,tmp2'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/broadcom/b43/phy_n.c: In function 'b43_nphy_op_recalc_txpower': drivers/net/wireless/broadcom/b43/phy_n.c:5898:7: warning: variable 'tx_pwr_state' set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/b43/phy_n.c:6047:20: warning: variable 'tmp2' set but not used [-Wunused-but-set-variable] 'tx_pwr_state' never used since introduction in commit 8615eb2870f1 ("b43: N-PHY: support setting custom TX power") 'tmp2' not used any more since commit c002831a07dd ("b43: N-PHY: use helper for checking IPA") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: fix false-positive -Wmaybe-unintialized warningArnd Bergmann
When CONFIG_NO_AUTO_INLINE is set, we get a false-postive warning for the brcmf_fw_request_nvram_done() function, after gcc figures out that brcmf_fw_nvram_from_efi() might not set the 'data_len' variable, but fails to notice that it always returns NULL: drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c: In function 'brcmf_fw_request_nvram_done': drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c:560:11: error: 'data_len' may be used uninitialized in this function [-Werror=maybe-uninitialized] Mark it 'inline' to force gcc to understand this. Fixes: ce2e6db554fa ("brcmfmac: Add support for getting nvram contents from EFI variables") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: disable command decode in sdio_aosWright Feng
AOS is a part of the SDIOD core that becomes active when the rest of SDIOD is sleeping to keep SDIO bus alive responding to reduced set of commands. Transaction between AOS and SDIOD is not protected, and if cmd 52 is received in AOS and in the middle of response state changed from AOS to SDIOD, response is corrupted and it causes to SDIO Host controller to hang. Command decode for below chips are disabled in this commit: - 4339 - 4345 - 4354 - 4373 Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: 4373 save-restore supportChi-Hsien Lin
Use chipcommon sr_control0 register to check 4373 sr support. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: update 43012 F2 watermark setting to fix DMA Error during UDP RX ↵Naveen Gupta
Traffic The number of words that the read FIFO has to contain except the end of frame before sends data back to the host. Max watermark = (512B - 2* (BurstLength))/4 = (512 - 128)/4 = 384/4 = 0x60 so if burst length (i.e. BurstLength = 64) is increased, watermark has to be reduced. This is the optimal setting for this chip. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Naveen Gupta <naveen.gupta@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: allow GCI core enumurationChi-Hsien Lin
GCI core is needed for ULP operation. Allow GCI core enumuration with below changes: - Allow GCI to be added to core list even when it doesn't have a wrapper. - Allow 8K address space size. - Don't overwrite the address value when an additional size descriptor is in place. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: add support for CYW43012 SDIO chipsetChi-Hsien Lin
CYW43012 is a 1x1 802.11a/b/g/n Dual-Band HT20, 256-QAM/Turbo QAM. It is an Ultra Low Power WLAN+BT combo chip. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Praveen Babu C <praveen.chandran@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: set SDIO F1 MesBusyCtrl for CYW4373Madhan Mohan R
Along with F2 watermark (existing) configuration, F1 MesBusyCtrl should be enabled & sdio device RX FIFO watermark should be configured to avoid overflow errors. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: set F2 watermark to 256 for 4373Wright Feng
We got SDIO_CRC_ERROR with 4373 on SDR104 when doing bi-directional throughput test. Enable watermark to 256 to guarantee the operation stability. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: add 4354 raw pcie device idWinnie Chang
Add the raw 4354 PCIe device ID for unprogrammed Cypress boards. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Winnie Chang <winnie.chang@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: handle compressed tx status signalChung-Hsien Hsu
Firmware inform the driver about tx status by normal tx status signal or compressed tx status signal. This patch adds support to handle the compressed tx status signal. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: enable frameburst mode in default firmware settingWright Feng
The frameburst feature can enable per-packet framebursting in firmware side and get higher TX throughput in High Throughput(HT) mode. To enhance TX throughput, we enable frameburst mode in default firmware setting. Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: add credit numbers updating supportWright Feng
The credit numbers are static and tunable per chip in firmware side. However the credit number may be changed that is based on packet pool length and will send BRCMF_E_FIFO_CREDIT_MAP event to notify host driver updates the credit numbers during interface up. The purpose of this patch is making host driver has ability of updating the credit numbers when receiving the BRCMF_E_FIFO_CREDIT_MAP event. Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mwifiex: add NL80211_STA_INFO_RX_BITRATE supportBrian Norris
Comparing the existing TX_BITRATE parsing code (in mwifiex_parse_htinfo()) with the RX bitrate histograms in debugfs.c, it appears that the rxpd_rate and rxpd_htinfo fields have the same format. At least, they give reasonable results when I parse them this way. So this patch adds support for RX_BITRATE to our station info dump. Along the way, I add legacy bitrate parsing into the same function, using the debugfs code (mwifiex_histogram_read() and mwifiex_adjust_data_rate()) as reference. Additionally, to satisfy the requirements of NL80211_STA_INFO_RX_BITRATE, I skip logging the bitrate of multicast packets. This shouldn't add a lot of overhead to the RX path, as there are already several similar 802.3 header checks in this same codepath. We can also bias the branch behavior to favor unicast, as that's the common performance-sensitive case. I'd consider this support somewhat experimental, as I have zero documentation from Marvell. But the existing driver code gives me good reason to think this is correct. I've tested this on a few different 802.11{a,b,g,n,ac} networks, and the reported bitrates look good to me. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mwifiex: refactor mwifiex_parse_htinfo() for reuseBrian Norris
This function converts some firmware-specific parameters into cfg80211 'rate_info' structures. It currently assumes it's dealing only with TX bitrate, but the RX bitrate looks to be the same, so refactor this function to be reusable. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mwifiex: debugfs: correct histogram spacing, formattingBrian Norris
Currently, snippets of this file look like: rx rates (in Mbps): 0=1M 1=2M2=5.5M 3=11M 4=6M 5=9M 6=12M 7=18M 8=24M 9=36M 10=48M 11=54M12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40) 44-53=MCS0-9(VHT:BW20)54-63=MCS0-9(VHT:BW40)64-73=MCS0-9(VHT:BW80) ... noise_flr[--96dBm] = 22 noise_flr[--95dBm] = 149 noise_flr[--94dBm] = 9 noise_flr[--93dBm] = 2 We're missing some spaces, and we're adding a minus sign ('-') on values that are already negative signed integers. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mwifiex: fix potential NULL dereference and use after freePan Bian
There are two defects: (1) passing a NULL bss to mwifiex_save_hidden_ssid_channels will result in NULL dereference, (2) using bss after dropping the reference to it via cfg80211_put_bss. To fix them, the patch moves the buggy code to the branch that bss is not NULL and puts it before cfg80211_put_bss. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mt76: add entry in MAINTAINERS fileLorenzo Bianconi
Add entry for mt76 driver in MAINTAINERS file Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mt76: fix potential NULL pointer dereference in mt76_stop_tx_queuesLorenzo Bianconi
Starting from mac80211 commit adf8ed01e4fd ("mac80211: add an optional TXQ for other PS-buffered frames") and commit 0eeb2b674f05 ("mac80211: add an option for station management TXQ") a new per-sta queue has been introduced for bufferable management frames. sta->txq[IEEE80211_NUM_TIDS] is initialized just if the driver reports the following hw flags: - IEEE80211_HW_STA_MMPDU_TXQ - IEEE80211_HW_BUFF_MMPDU_TXQ This can produce a NULL pointer dereference in mt76_stop_tx_queues since mt76 iterates on all available sta tx queues assuming they are initialized by mac80211. This issue has been spotted analyzing the code (it has not triggered any crash yet) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13Merge tag 'mt76-for-kvalo-2018-11-30' of https://github.com/nbd168/wirelessKalle Valo
first batch of mt76 patches for 4.21 * use the same firmware for mt76x2e and mt76x2u * mt76x2 fixes * mt76x0 fixes * mt76x0e survey support * more unification between mt76x2 and mt76x0 * mt76x0e AP mode support * mt76x0e DFS support * rework and fix tx status handling for mt76x0 and mt76x2 kvalo: fixed a conflict in drivers/net/wireless/mediatek/mt76/mt76x2/pci_main.c and a build problem in drivers/net/wireless/mediatek/mt76/mt76x02_util.c
2018-12-13Revert "mwifiex: restructure rx_reorder_tbl_lock usage"Brian Norris
This reverts commit 5188d5453bc9380ccd4ae1086138dd485d13aef2, because it introduced lock recursion: BUG: spinlock recursion on CPU#2, kworker/u13:1/395 lock: 0xffffffc0e28a47f0, .magic: dead4ead, .owner: kworker/u13:1/395, .owner_cpu: 2 CPU: 2 PID: 395 Comm: kworker/u13:1 Not tainted 4.20.0-rc4+ #2 Hardware name: Google Kevin (DT) Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex] Call trace: dump_backtrace+0x0/0x140 show_stack+0x20/0x28 dump_stack+0x84/0xa4 spin_bug+0x98/0xa4 do_raw_spin_lock+0x5c/0xdc _raw_spin_lock_irqsave+0x38/0x48 mwifiex_flush_data+0x2c/0xa4 [mwifiex] call_timer_fn+0xcc/0x1c4 run_timer_softirq+0x264/0x4f0 __do_softirq+0x1a8/0x35c do_softirq+0x54/0x64 netif_rx_ni+0xe8/0x120 mwifiex_recv_packet+0xfc/0x10c [mwifiex] mwifiex_process_rx_packet+0x1d4/0x238 [mwifiex] mwifiex_11n_dispatch_pkt+0x190/0x1ac [mwifiex] mwifiex_11n_rx_reorder_pkt+0x28c/0x354 [mwifiex] mwifiex_process_sta_rx_packet+0x204/0x26c [mwifiex] mwifiex_handle_rx_packet+0x15c/0x16c [mwifiex] mwifiex_rx_work_queue+0x104/0x134 [mwifiex] worker_thread+0x4cc/0x72c kthread+0x134/0x13c ret_from_fork+0x10/0x18 This was clearly not tested well at all. I simply performed 'wget' in a loop and it fell over within a few seconds. Fixes: 5188d5453bc9 ("mwifiex: restructure rx_reorder_tbl_lock usage") Cc: <stable@vger.kernel.org> Cc: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13rtlwifi: Fix leak of skb when processing C2H_BT_INFOLarry Finger
With commit 0a9f8f0a1ba9 ("rtlwifi: fix btmpinfo timeout while processing C2H_BT_INFO"), calling rtl_c2hcmd_enqueue() with rtl_c2h_fast_cmd() true, the routine returns without freeing that skb, thereby leaking it. This issue has been discussed at https://github.com/lwfinger/rtlwifi_new/issues/401 and the fix tested there. Fixes: 0a9f8f0a1ba9 ("rtlwifi: fix btmpinfo timeout while processing C2H_BT_INFO") Reported-and-tested-by: Francisco Machado Magalhães Neto <franmagneto@gmail.com> Cc: Francisco Machado Magalhães Neto <franmagneto@gmail.com> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Stable <stable@vger.kernel.org> # 4.18+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3Thomas Hellstrom
With the new validation code, a malicious user-space app could potentially submit command streams with enough buffer-object and resource references in them to have the resulting allocated validion nodes and relocations make the kernel run out of GFP_KERNEL memory. Protect from this by having the validation code reserve TTM graphics memory when allocating. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> --- v2: Removed leftover debug printouts
2018-12-13bpf: sync tools/include/uapi/linux/bpf.hSong Liu
Sync bpf.h for nr_prog_tags and prog_tags. Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13bpf: include sub program tags in bpf_prog_infoSong Liu
Changes v2 -> v3: 1. remove check for bpf_dump_raw_ok(). Changes v1 -> v2: 1. Fix error path as Martin suggested. This patch adds nr_prog_tags and prog_tags to bpf_prog_info. This is a reliable way for user space to get tags of all sub programs. Before this patch, user space need to find sub program tags via kallsyms. This feature will be used in BPF introspection, where user space queries information about BPF programs via sys_bpf. Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13Merge branch 'bpf-fix-kptr-checks'Daniel Borkmann
Martin KaFai Lau says: ==================== This patch set removes the bpf_dump_raw_ok() guard for the func_info and line_info during bpf_prog_get_info_by_fd(). ==================== Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13bpf: Remove !func_info and !line_info check from test_btf and bpftoolMartin KaFai Lau
kernel can provide the func_info and line_info even it fails the btf_dump_raw_ok() test because they don't contain kernel address. This patch removes the corresponding '== 0' test. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13bpf: Remove bpf_dump_raw_ok() check for func_info and line_infoMartin KaFai Lau
The func_info and line_info have the bpf insn offset but they do not contain kernel address. They will still be useful for the userspace tool to annotate the xlated insn. This patch removes the bpf_dump_raw_ok() guard for the func_info and line_info during bpf_prog_get_info_by_fd(). The guard stays for jited_line_info which contains the kernel address. Although this bpf_dump_raw_ok() guard behavior has started since the earlier func_info patch series, I marked the Fixes tag to the latest line_info patch series which contains both func_info and line_info and this patch is fixing for both of them. Fixes: c454a46b5efd ("bpf: Add bpf_line_info support") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13Merge branch 'bpf-bpftool-license-update'Daniel Borkmann
Jakub Kicinski says: ==================== We are changing/clarifying the license on bpftool to GPLv2-only + BSD-2-Clause for all files. Current license mix is incompatible with libbfd (which is GPLv3-only) and therefore Debian maintainers are apprehensive about packaging bpftool. Acks include authors of code which has been copied into bpftool (e.g. JSON writer from iproute2, code from tools/bpf, code from BPF samples and selftests, etc.) Thanks again to all the authors who acked the change! ==================== Acked-by: Roman Gushchin <guro@fb.com> Acked-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Sean Young <sean@mess.org> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: David Calavera <david.calavera@gmail.com> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Joe Stringer <joe@wand.net.nz> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Acked-by: Petar Penkov <ppenkov@stanford.edu> Acked-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> CC: okash.khawaja@gmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13tools: bpftool: dual license all filesJakub Kicinski
Currently bpftool contains a mix of GPL-only and GPL or BSD2 licensed files. Make sure all files are dual licensed under GPLv2 and BSD-2-Clause. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Sean Young <sean@mess.org> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: David Calavera <david.calavera@gmail.com> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Joe Stringer <joe@wand.net.nz> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Acked-by: Petar Penkov <ppenkov@stanford.edu> Acked-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> CC: okash.khawaja@gmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13tools: bpftool: replace Netronome boilerplate with SPDX license headersJakub Kicinski
Replace the repeated license text with SDPX identifiers. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Sean Young <sean@mess.org> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: David Calavera <david.calavera@gmail.com> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Joe Stringer <joe@wand.net.nz> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Acked-by: Petar Penkov <ppenkov@stanford.edu> Acked-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> CC: okash.khawaja@gmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13tools: bpftool: fix SPDX format in headersJakub Kicinski
Documentation/process/license-rules.rst sayeth: 2. Style: The SPDX license identifier is added in form of a comment. The comment style depends on the file type:: C source: // SPDX-License-Identifier: <SPDX License Expression> C header: /* SPDX-License-Identifier: <SPDX License Expression> */ Headers should use C comment style. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Roman Gushchin <guro@fb.com> Acked-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Sean Young <sean@mess.org> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: David Calavera <david.calavera@gmail.com> Acked-by: Andrey Ignatov <rdna@fb.com> Acked-by: Joe Stringer <joe@wand.net.nz> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Acked-by: Petar Penkov <ppenkov@stanford.edu> Acked-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> CC: okash.khawaja@gmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-13USB: serial: option: add Fibocom NL668 seriesJörgen Storvist
Added USB serial option driver support for Fibocom NL668 series cellular modules. Reserved USB endpoints 4, 5 and 6 for network + ADB interfaces. usb-devices output (QMI mode) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1508 ProdID=1001 Rev=03.18 S: Manufacturer=Nodecom NL668 Modem S: Product=Nodecom NL668-CN Modem S: SerialNumber= C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) usb-devices output (ECM mode) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1508 ProdID=1001 Rev=03.18 S: Manufacturer=Nodecom NL668 Modem S: Product=Nodecom NL668-CN Modem S: SerialNumber= C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 11:59:51 +0000