summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-13Merge branch 'linux-4.20' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
Three fixes: tegra regression fix display flushing fix mst cleanup fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7WCPzjQZonk+eS1FgEUKirz-4LOrVpMUVMM=D-GjbVpg@mail.gmail.com
2018-12-12selftests/bpf: add btf annotations for cgroup_local_storage mapsRoman Gushchin
Add btf annotations to cgroup local storage maps (per-cpu and shared) in the network packet counting example. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-12bpf: add bpffs pretty print for cgroup local storage mapsRoman Gushchin
Implement bpffs pretty printing for cgroup local storage maps (both shared and per-cpu). Output example (captured for tools/testing/selftests/bpf/netcnt_prog.c): Shared: $ cat /sys/fs/bpf/map_2 # WARNING!! The output is for debug purpose only # WARNING!! The output format will change {4294968594,1}: {9999,1039896} Per-cpu: $ cat /sys/fs/bpf/map_1 # WARNING!! The output is for debug purpose only # WARNING!! The output format will change {4294968594,1}: { cpu0: {0,0,0,0,0} cpu1: {0,0,0,0,0} cpu2: {1,104,0,0,0} cpu3: {0,0,0,0,0} } Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-12bpf: pass struct btf pointer to the map_check_btf() callbackRoman Gushchin
If key_type or value_type are of non-trivial data types (e.g. structure or typedef), it's not possible to check them without the additional information, which can't be obtained without a pointer to the btf structure. So, let's pass btf pointer to the map_check_btf() callbacks. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-12selftests/bpf: use __bpf_constant_htons in test_prog.cStanislav Fomichev
For some reason, my older GCC (< 4.8) isn't smart enough to optimize the !__builtin_constant_p() branch in bpf_htons, I see: error: implicit declaration of function '__builtin_bswap16' Let's use __bpf_constant_htons as suggested by Daniel Borkmann. I tried to use simple htons, but it produces the following: test_progs.c:54:17: error: braced-group within expression allowed only inside a function .eth.h_proto = htons(ETH_P_IP), Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-13Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Fixes for 4.20: - Stability fixes for new polaris variants (e.g., RX590) - New vega pci ids - Vega20 smu fix - Ctx locking fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181212203022.3054-1-alexander.deucher@amd.com
2018-12-12Merge branch 'stmmac-mt2712-support'David S. Miller
Biao Huang says: ==================== add Ethernet driver support for mt2712 Changes in v6: modifications according to comments from Rob/Andrew/Sean: 1. use delay_ps instead of delay stage. 2. add comments in driver to avoid confusion. 2. rewrite set_delay function. 3. modify binding document for properties: tx-delay-ps/rx-delay-ps/pericfg etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12dt-binding: mediatek-dwmac: add binding document for MediaTek MT2712 DWMACBiao Huang
The commit adds the device tree binding documentation for the MediaTek DWMAC found on MediaTek MT2712. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12stmmac: dwmac-mediatek: add support for mt2712Biao Huang
Add Ethernet support for MediaTek SoCs from the mt2712 family Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12i40e: fix mac filter delete when setting mac addressStefan Assmann
A previous commit moved the ether_addr_copy() in i40e_set_mac() before the mac filter del/add to avoid a race. However it wasn't taken into account that this alters the mac address being handed to i40e_del_mac_filter(). Also changed i40e_add_mac_filter() to operate on netdev->dev_addr, hopefully that makes the code easier to read. Fixes: 458867b2ca0c ("i40e: don't remove netdev->dev_addr when syncing uc list") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-12-13Merge tag 'drm-misc-fixes-2018-12-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - rockchip: Revert change causing WARN on shutdown (Brian) Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181212204309.GA150523@art_vandelay
2018-12-13Merge tag 'drm-intel-fixes-2018-12-12-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Two fixes to avoid GPU hangs (on Braswell and Gen3) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181212134010.GA18900@jlahtine-desk.ger.corp.intel.com
2018-12-13Merge tag 'drm-intel-fixes-2018-12-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix for system crash after GPU hang (Bugzilla #107945) - GVT fix for guest graphics corruption (https://github.com/intel/gvt-linux/issues/61) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181207104352.GA18214@jlahtine-desk.ger.corp.intel.com
2018-12-12drm/amdgpu: drop fclk/gfxclk ratio settingEvan Quan
Since this is not needed any more on the latest SMC firmware. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-12IB/core: Fix oops in netdev_next_upper_dev_rcu()Mark Zhang
When support for bonding of RoCE devices was added, there was necessarily a link between the RoCE device and the paired netdevice that was part of the bond. If you remove the mlx4_en module, that paired association is broken (the RoCE device is still present but the paired netdevice has been released). We need to account for this in is_upper_ndev_bond_master_filter() and filter out those links with a broken pairing or else we later oops in netdev_next_upper_dev_rcu(). Fixes: 408f1242d940 ("IB/core: Delete lower netdevice default GID entries in bonding scenario") Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-12USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)Jörgen Storvist
Added USB serial option driver support for Simcom SIM7500/SIM7600 series cellular modules exposing MBIM interface (VID 0x1e0e,PID 0x9003) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9003 Rev=03.18 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 6 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-12USB: serial: option: add GosunCn ZTE WeLink ME3630Jörgen Storvist
Added USB serial option driver support for GosunCn ZTE WeLink ME3630 series cellular modules for USB modes ECM/NCM and MBIM. usb-devices output MBIM mode: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0602 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim usb-devices output ECM/NCM mode: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1476 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-12dm thin: bump target versionMike Snitzer
Decoupled version bump from commit f6c367585d0 ("dm thin: send event about thin-pool state change _after_ making it") because version bumps just create conflicts when backporting to the stable trees. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-12-12drm/vmwgfx: remove redundant return ret statementColin Ian King
The return statement is redundant as there is a return statement immediately before it so we have dead code that can be removed. Also remove the unused declaration of ret. Detected by CoverityScan, CID#1473793 ("Structurally dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-12-12drm/i915: Flush GPU relocs harder for gen3Chris Wilson
Adding an extra MI_STORE_DWORD_IMM to the gpu relocation path for gen3 was good, but still not good enough. To survive 24+ hours under test we needed to perform not one, not two but three extra store-dw. Doing so for each GPU relocation was a little unsightly and since we need to worry about userspace hitting the same issues, we should apply the dummy store-dw into the EMIT_FLUSH. Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing") References: 7fa28e146994 ("drm/i915: Write GPU relocs harder with gen3") Testcase: igt/gem_tiled_fence_blits # blb/pnv Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181207134037.11848-1-chris@chris-wilson.co.uk (cherry picked from commit a889580c087a9cf91fddb3832ece284174214183) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-12-12drm/i915: Allocate a common scratch pageChris Wilson
Currently we allocate a scratch page for each engine, but since we only ever write into it for post-sync operations, it is not exposed to userspace nor do we care for coherency. As we then do not care about its contents, we can use one page for all, reducing our allocations and avoid complications by not assuming per-engine isolation. For later use, it simplifies engine initialisation (by removing the allocation that required struct_mutex!) and means that we can always rely on there being a scratch page. v2: Check that we allocated a large enough scratch for I830 w/a Fixes: 06e562e7f515 ("drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5") # v4.18.20 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108850 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181204141522.13640-1-chris@chris-wilson.co.uk Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.18.20+ (cherry picked from commit 5179749925933575a67f9d8f16d0cc204f98a29f) [Joonas: Use new function in gen9_init_indirectctx_bb too] Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-12-12drm/i915/execlists: Apply a full mb before execution for BraswellChris Wilson
Braswell is really picky about having our writes posted to memory before we execute or else the GPU may see stale values. A wmb() is insufficient as it only ensures the writes are visible to other cores, we need a full mb() to ensure the writes are in memory and visible to the GPU. The most frequent failure in flushing before execution is that we see stale PTE values and execute the wrong pages. References: 987abd5c62f9 ("drm/i915/execlists: Force write serialisation into context image vs execution") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181206084431.9805-3-chris@chris-wilson.co.uk (cherry picked from commit 490b8c65b9db45896769e1095e78725775f47b3e) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-12-11Merge branch 'mlxsw-Add-Spectrum-2-multicast-routing-support'David S. Miller
Ido Schimmel says: ==================== mlxsw: Add Spectrum-2 multicast routing support Nir says: In Spectrum the firmware provided an abstraction for multicast routing on top of the policy engine. In Spectrum-2 this is no longer the case and the driver must interact directly with the policy engine in order to program multicast routes. Every route is written as an ACL rule, its priority set according to route type (*,G) or (S,G) and its action is an appropriate multicast routing action. Multicast routes are written to a specific ACL group which is bound to the appropriate IP protocol IPv4/IPv6. Patch #1 adds PEMRBT register needed to declare which ACL group is dedicated for each IP protocol multicast routing function. Patch #2 Changes initialization order and puts ACL before router as multicast router now uses ACL module. Patch #3 adds Spectrum-2 ACL keys needed for multicast route matching. Patch #4 adds another ACL profile - in addition to existing flower profile - which allows the multicast routing module to program rules directly into the ACL block. Patch #5 adds the ability to update ACL rules' action, since multicast routes actions may be updated after being configured. Patch #6 separates rule creation operation and rule action creation operation as in multicast router the action is created before the route is inserted. Patch #7 sharpens priority handling in Spectrum-2, to ensure incorrect values are not set to rule's priority. Patch #8 adds the implementation of multicast routing for IPv4 and IPv6 over existing ACL rule programming Finally, patch #9 adds a test for IPv4/IPv6 multicast routing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11selftests: forwarding: Add multicast routing testNir Dotan
Introduce basic testing for both IPv4 and IPv6 multicast. The test creates an (S,G) type route, sends traffic and verifies traffic arrives when the route is present and then verifies traffic does not arrive after deleting the route. This test requires smcroute - https://github.com/troglobit/smcroute which is a tool that allows creation of static multicast routes. Signed-off-by: Nir Dotan <nird@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11mlxsw: spectrum_router: Add Multicast routing support for Spectrum-2Nir Dotan
Add implementation of Spectrum-2 multicast routes for both IPv4 and IPv6 by using ACL module explicitly. In Spectrum-2, multicast routes are set as ACL rules, so initialization takes care of creating dedicated ACL groups and binding them to the appropriate multicast routing protocol IPv4/IPv6, and afterwards routes configuration translates to setting explicit ACL rules. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11mlxsw: spectrum_acl: Limit priority valueNir Dotan
In Spectrum-2, higher priority value wins and priority valid values are in the range of {1,cap_kvd_size-1}. mlxsw_sp_acl_tcam_priority_get converts from lower-bound priorities alike tc flower to Spectrum-2 HW range. Up until now tc flower did not provide priority 0 or reached the maximal value, however multicast routing does provide priority 0. Therefore, Change mlxsw_sp_acl_tcam_priority_get to verify priority is in the correct range. Make sure priority is never set to zero and never exceeds the maximal allowed value. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11mlxsw: spectrum_acl: Support rule creation without action creationNir Dotan
Up until now, when ACL rule was created its action was created with it. It suits well for tc flower where ACL rule always needs an action, however it does not suit multicast router, where the action is created prior to setting a route, which in Spectrum-2 is actually an ACL rule. Add support for rule creation without action creation. Do it by adding afa_block argument to mlxsw_sp_acl_rule_create, which if NULL then an action would be created, also add an indication within struct mlxsw_sp_acl_rule_info that tells if the action should be destroyed when the rule is destroyed. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11mlxsw: spectrum_acl: Add replace rule action operationNir Dotan
Multicast routes actions may be updated after creation. An example for that is an addition of an egress interface to an existing route. So far, as tc flower API dictated, ACL rules were either created or deleted. Since multicast routes in Spectrum-2 are written to ACL as any rule, it is required to allow the update of a rule's action as it may change. Add methods and operations to support updating rule's action. This is supported only for Spectrum-2. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11mlxsw: spectrum_acl: Add multicast router profile operationsNir Dotan
Add specific ACL operations needed for programming multicast routing ACL groups and routes. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11mlxsw: spectrum_acl: Add Spectrum-2 keysNir Dotan
Add virtual router ID fields to Spectrum-2 key blocks set, as the field is required for multicast routing. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11mlxsw: spectrum: Change stage of ACL initializationNir Dotan
In Spectrum-2, MC routing is implemented using ACL block explicitly, so router initialization should take place after ACL initialization. Set the initialization of the ACL block before IP router initizalization takes place, so multicast router will be able to allocate ACL data structures and create its required chains. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11mlxsw: reg: Add Policy Engine Multicast Router Binding Table RegisterNir Dotan
In Spectrum-2, multicast routing is implemented explicitly using policy engine (ACL) block. PEMRBT register is used to bind a dedicated ACL group to a specific IP protocol. Add the register to be later used in multicast router implementation. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12drm/nouveau/kms: Fix memory leak in nv50_mstm_del()Lyude Paul
Noticed this while working on redoing the reference counting scheme in the DP MST helpers. Nouveau doesn't attempt to call drm_dp_mst_topology_mgr_destroy() at all, which leaves it leaking all of the resources for drm_dp_mst_topology_mgr and it's children mstbs+ports. Fixes: f479c0ba4a17 ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream") Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-12-12drm/nouveau/kms/nv50-: also flush fb writes when rewinding push bufferBen Skeggs
Should hopefully fix a regression some people have been seeing since EVO push buffers were moved to VRAM by default on Pascal GPUs. Fixes: d00ddd9da ("drm/nouveau/kms/nv50-: allocate push buffers in vidmem on pascal") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: <stable@vger.kernel.org> # 4.19+
2018-12-11r8169: fix crash if CONFIG_DEBUG_SHIRQ is enabledHeiner Kallweit
If CONFIG_DEBUG_SHIRQ is enabled __free_irq() intentionally fires a spurious interrupt. This interrupt causes a crash because tp->dev->phydev is NULL at that time. Fixes: 38caff5a445b ("r8169: handle all interrupt events in the hard irq handler") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11hinic: optmize rx refill buffer mechanismXue Chaojing
There is no need to schedule a different tasklet for refill, This patch remove it. Suggested-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64KDaniel Borkmann
Michael and Sandipan report: Commit ede95a63b5 introduced a bpf_jit_limit tuneable to limit BPF JIT allocations. At compile time it defaults to PAGE_SIZE * 40000, and is adjusted again at init time if MODULES_VADDR is defined. For ppc64 kernels, MODULES_VADDR isn't defined, so we're stuck with the compile-time default at boot-time, which is 0x9c400000 when using 64K page size. This overflows the signed 32-bit bpf_jit_limit value: root@ubuntu:/tmp# cat /proc/sys/net/core/bpf_jit_limit -1673527296 and can cause various unexpected failures throughout the network stack. In one case `strace dhclient eth0` reported: setsockopt(5, SOL_SOCKET, SO_ATTACH_FILTER, {len=11, filter=0x105dd27f8}, 16) = -1 ENOTSUPP (Unknown error 524) and similar failures can be seen with tools like tcpdump. This doesn't always reproduce however, and I'm not sure why. The more consistent failure I've seen is an Ubuntu 18.04 KVM guest booted on a POWER9 host would time out on systemd/netplan configuring a virtio-net NIC with no noticeable errors in the logs. Given this and also given that in near future some architectures like arm64 will have a custom area for BPF JIT image allocations we should get rid of the BPF_JIT_LIMIT_DEFAULT fallback / default entirely. For 4.21, we have an overridable bpf_jit_alloc_exec(), bpf_jit_free_exec() so therefore add another overridable bpf_jit_alloc_exec_limit() helper function which returns the possible size of the memory area for deriving the default heuristic in bpf_jit_charge_init(). Like bpf_jit_alloc_exec() and bpf_jit_free_exec(), the new bpf_jit_alloc_exec_limit() assumes that module_alloc() is the default JIT memory provider, and therefore in case archs implement their custom module_alloc() we use MODULES_{END,_VADDR} for limits and otherwise for vmalloc_exec() cases like on ppc64 we use VMALLOC_{END,_START}. Additionally, for archs supporting large page sizes, we should change the sysctl to be handled as long to not run into sysctl restrictions in future. Fixes: ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations") Reported-by: Sandipan Das <sandipan@linux.ibm.com> Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-12bpf: arm64: Enable arm64 jit to provide bpf_line_infoMartin KaFai Lau
This patch enables arm64's bpf_int_jit_compile() to provide bpf_line_info by calling bpf_prog_fill_jited_linfo(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-11selftests/seccomp: Remove SIGSTOP si_pid checkKees Cook
Commit f149b3155744 ("signal: Never allocate siginfo for SIGKILL or SIGSTOP") means that the seccomp selftest cannot check si_pid under SIGSTOP anymore. Since it's believed[1] there are no other userspace things depending on the old behavior, this removes the behavioral check in the selftest, since it's more a "extra" sanity check (which turns out, maybe, not to have been useful to test). [1] https://lkml.kernel.org/r/CAGXu5jJaZAOzP1qFz66tYrtbuywqb+UN2SOA1VLHpCCOiYvYeg@mail.gmail.com Reported-by: Tycho Andersen <tycho@tycho.ws> Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <shuah@kernel.org>
2018-12-11block: Fix null_blk_zoned creation failure with small number of zonesShin'ichiro Kawasaki
null_blk_zoned creation fails if the number of zones specified is equal to or is smaller than 64 due to a memory allocation failure in blk_alloc_zones(). With such a small number of zones, the required memory size for all zones descriptors fits in a single page, and the page order for alloc_pages_node() is zero. Allow this value in blk_alloc_zones() for the allocation to succeed. Fixes: bf5054569653 "block: Introduce blk_revalidate_disk_zones()" Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-11net/mlx5e: Use monitor counters for update statsEyal Davidovich
- Adding new notifier block (struct mlx5_nb) monitor_counters_nb for handeling MONITOR_COUNTER new event type. - Adding work queue element: monitor_counters_work for re-arm and update stats. - We re-queue the update stat work, only when working over firmware that doesn't support the monitored counters. Signed-off-by: Eyal Davidovich <eyald@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-11net/mlx5e: Monitor counters commands supportEyal Davidovich
new file monitor_stats.c for the new API. add arm_monitor_counter new command support. add set_monitor_counter new command support. The device can monitor specific counters and provide an event to notify when these counters are changed. The monitoring is done in best effort manner where the minimum notification period is 200 ms, however when the device is loaded, the notification might be delayed. To configure the required counters to be monitored, the SET_MONITOR_COUNTER command shall be used with a list of counters to be monitored. The device firmware can monitor up to HCA_CAP.max_num_of_monitor_counters. The configuration is done based on counter type (such as ppcnt, q counter, etc) and additional param according to the type of counter selected. Upon monitor counter change, the device will generate Monitor_Counter_Change event. The device will not generate new events unless the driver re-arms the monitoring functionality, using the ARM_MONITOR_COUNTER command. Signed-off-by: Eyal Davidovich <eyald@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-11net/mlx5e: Avoid query PPCNT register if not supported by the deviceEyal Davidovich
PPCNT is not supported if PCAM access reg is supported and ppcnt bit is clear. Signed-off-by: Eyal Davidovich <eyald@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-11net/mlx5e: Use CQE padding for Ethernet CQsDaniel Jurgens
Writing 64B CQEs to 128B cache lines results in a RMW operation. Padding the CQEs to 128B if possible improves performance on 128B cache line systems like PPC. Testing on PPC showed up to a 24% improvement in small packet throughput vs the default behavior, depending on the workload and system topology. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-11net/mlx5e: Support multiple encapsulations for a TC flowEli Britstein
Currently a flow is associated with a single encap structure. The FW extended destination features enables the driver to associate a flow with multiple encap instances. Change the encap id field from a flow scope to a per destination value in the flow attributes struct. Use the encaps array to associate a flow table entry with multiple encap entries. Update the neigh logic to offload only if all encapsulations used in a flow are connected, and un-offload upon the first one disconnected. Note that the driver can now support up to two encap destinations. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-11net/mlx5e: Allow association of a flow to multiple encapsEli Britstein
Currently a flow can be associated with a single encap entry. The extended destination feature enables the driver to configure multiple encap entries per flow. Change the encap flow association field to array as a pre-step towards supporting multiple encap destinations. Use only the first array element, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-11net/mlx5e: Change parse attr struct to accommodate multiple tunnel infosEli Britstein
Currently the driver can support only a single TC tunnel_set action. Change the tunnel info fields to arrays, as a pre-step to support multiple encapsulations for a single flow, with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-11net/mlx5e: Support header rewrite actions with remote port mirroringEli Britstein
A rule with the following actions is split to a two level FDB: 1. Forward to local mirror vport 2. Header rewrite 3. Forward to local vport In the first level flow table, forward the packet to the local port and forward the packet to the second level flow table for header rewrite and local port forwarding. This configuration fails when mirroring to a remote encapsulated destination because currently an FTE cannot support encap and table destinations. Use the extended destination capabilities to configure the first level flow table with a multi-destination FTE to the uplink and second level table and the second level flow table for the header rewrite and local port forwarding. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-11net/mlx5e: Replace the split logic with extended destinationEli Britstein
Currently the FTE encap flag applies to all destinations. To support mirroring encapsulated traffic to a local port the driver split the two destinations to two flow table entries: Table#0: - FWD to the local vport - Goto table#1 Table#1: - Encap and FWD to wire The firmware extended destination capabilities enable the driver to set an encapsulation flag per destination. Remove the split logic and use the extended destination mechanism instead. Note that split technique is still required for pedit and VLAN push scenarios. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-11net/mlx5e: Annul encap action ordering requirementEli Britstein
Currently a FW syndrome is emitted if the driver configures a multi-destination FTE where the first destination is a tunneled uplink port and the second destination is a local vPort. Support this scenario by creating a multi-destination FTE using the firmware's extended destination capabilities. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-14 17:06:49 +0000