summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-10net/mlx5: Remove the get protocol device interface entryOr Gerlitz
This isn't used anywhere across the mlx5 driver stack, remove it. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-10net/mlx5: Support extended destination format in flow steering commandEli Britstein
Update the flow steering command formatting according to the extended destination API. Note that the FW dictates that multi destination FTEs that involve at least one encap must use the extended destination format, while single destination ones must use the legacy format. Using extended destination format requires FW support. Check for its capabilities and return error if not supported. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-10net/mlx5: E-Switch, Change vhca id valid bool field to bit flagEli Britstein
Change the driver flow destination struct to use bit flags with the vhca id valid being the 1st one. The flags field is more extendable and will be used in downstream patch. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-10net/mlx5: Introduce extended destination fieldsEli Britstein
Extended destinations provide the ability to configure different encapsulation properties per destination on a single FTE. This is needed for use-cases such as remote mirroring over tunneled networks. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-10net/mlx5: Revise gre and nvgre key formatsOz Shlomo
GRE RFC defines a 32 bit key field. NVGRE RFC splits the 32 bit key field to 24 bit VSID (gre_key_h) and 8 bit flow entropy (gre_key_l). Define the two key parsing alternatives in a union, thus enabling both access methods. Signed-off-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-10net/mlx5: Add monitor commands layout and event dataEyal Davidovich
Will be used in downstream patch to monitor counter changes by the HCA and report it to the driver by an event. The driver will update its counters cached data accordingly. Signed-off-by: Eyal Davidovich <eyald@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-10net/mlx5: Add support for plugged-disabled cable status in PMEMikhael Goikhman
Support a new hardware module status in port module events: - module_status=0x4 (Cable plugged, but disabled) Signed-off-by: Mikhael Goikhman <migo@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-10net/mlx5: Add support for PCIe power slot exceeded error in PMEMikhael Goikhman
Support a new hardware error type in port module events: - error_type=0xc (PCIe system power slot exceeded) Signed-off-by: Mikhael Goikhman <migo@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-10net/mlx5: Rework handling of port module eventsMikhael Goikhman
Add explicit HW defined error values. For simplicity, keep counters for all statuses starting from 0, although currently status=0 is not used. Additionally, when HW signals an unexpected cable status, it is reported now rather than ignored. And status counter is now updated on errors. Signed-off-by: Mikhael Goikhman <migo@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-10block/bio: Do not zero user pagesKeith Busch
We don't need to zero fill the bio if not using kernel allocated pages. Fixes: f3587d76da05 ("block: Clear kernel memory before copying to user") # v4.20-rc2 Reported-by: Todd Aiken <taiken@mvtech.ca> Cc: Laurence Oberman <loberman@redhat.com> Cc: stable@vger.kernel.org Cc: Bart Van Assche <bvanassche@acm.org> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10drm/amdgpu/powerplay: Apply avfs cks-off voltages on VIKenneth Feng
Instead of EVV cks-off voltages, avfs cks-off voltages can avoid the overshoot voltages when switching sclk. Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-10drm/amdgpu: update SMC firmware image for polaris10 variantsJunwei Zhang
Some new variants require different firmwares. Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-10drm/amdkfd: add new vega20 pci idAlex Deucher
New vega20 id. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-10drm/amdkfd: add new vega10 pci idsAlex Deucher
New vega10 ids. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-10drm/amdgpu: add some additional vega20 pci idsAlex Deucher
New vega ids. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-10drm/amdgpu: add some additional vega10 pci idsAlex Deucher
New vega ids. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-12-10bpf: bpftool: Fix newline and p_err issueMartin KaFai Lau
This patch fixes a few newline issues and also replaces p_err with p_info in prog.c Fixes: b053b439b72a ("bpf: libbpf: bpftool: Print bpf_line_info during prog dump") Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-10ipv4: Fix potential Spectre v1 vulnerabilityGustavo A. R. Silva
vr.vifi is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: net/ipv4/ipmr.c:1616 ipmr_ioctl() warn: potential spectre issue 'mrt->vif_table' [r] (local cap) net/ipv4/ipmr.c:1690 ipmr_compat_ioctl() warn: potential spectre issue 'mrt->vif_table' [r] (local cap) Fix this by sanitizing vr.vifi before using it to index mrt->vif_table' Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10tcp: handle EOR and FIN conditions the same in tcp_tso_should_defer()Eric Dumazet
In commit f9bfe4e6a9d0 ("tcp: lack of available data can also cause TSO defer") we moved the test in tcp_tso_should_defer() for packets with a FIN flag, and we mentioned that the same would be done later for EOR flag. Both flags should be handled at the same time, after all other heuristics have been considered. They both mean that no more bytes can be added to this skb by an application. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10Merge branch 'dsa-ksz-Add-reset-GPIO-handling'David S. Miller
Marek Vasut says: ==================== net: dsa: ksz: Add reset GPIO handling Add code to handle optional reset GPIO in the KSZ switch driver and a matching DT property adjustments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10net: dsa: ksz: Add reset GPIO handlingMarek Vasut
Add code to handle optional reset GPIO in the KSZ switch driver. The switch has a reset GPIO line which can be controlled by the CPU, so make sure it is configured correctly in such setups. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: David S. Miller <davem@davemloft.net> Cc: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10net: dsa: ksz: Add optional reset GPIO to Microchip KSZ switch bindingMarek Vasut
Add optional reset GPIO, as such a signal is available on the KSZ switches. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10bonding: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10fjes: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10net: xenbus: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10ieee802154: at86rf230: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10ipvlan: Remove a useless comparisonYueHaibing
Fix following gcc warning: drivers/net/ipvlan/ipvlan_main.c:543:12: warning: comparison is always false due to limited range of data type [-Wtype-limits] 'mode' is a u16 variable, IPVLAN_MODE_L2 is zero, the comparison is always false Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10sctp: initialize sin6_flowinfo for ipv6 addrs in sctp_inet6addr_eventXin Long
syzbot reported a kernel-infoleak, which is caused by an uninitialized field(sin6_flowinfo) of addr->a.v6 in sctp_inet6addr_event(). The call trace is as below: BUG: KMSAN: kernel-infoleak in _copy_to_user+0x19a/0x230 lib/usercopy.c:33 CPU: 1 PID: 8164 Comm: syz-executor2 Not tainted 4.20.0-rc3+ #95 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x32d/0x480 lib/dump_stack.c:113 kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683 kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743 kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634 _copy_to_user+0x19a/0x230 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:183 [inline] sctp_getsockopt_local_addrs net/sctp/socket.c:5998 [inline] sctp_getsockopt+0x15248/0x186f0 net/sctp/socket.c:7477 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:2937 __sys_getsockopt+0x489/0x550 net/socket.c:1939 __do_sys_getsockopt net/socket.c:1950 [inline] __se_sys_getsockopt+0xe1/0x100 net/socket.c:1947 __x64_sys_getsockopt+0x62/0x80 net/socket.c:1947 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 sin6_flowinfo is not really used by SCTP, so it will be fixed by simply setting it to 0. The issue exists since very beginning. Thanks Alexander for the reproducer provided. Reported-by: syzbot+ad5d327e6936a2e284be@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10net: hns3: fix spelling mistake "offser" -> "offset"Colin Ian King
There is a spelling mistake in a msg string, fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10clk: qcom: qcs404: Fix gpll0_out_main parentSrinivas Kandagatla
gpll0_out_main parent is cxo so fix it. Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10selftests/bpf: add missing pointer dereference for map stacktrace fixupStanislav Fomichev
I get a segfault without it, other fixups always do dereference, and without dereference I don't understand how it can ever work. Fixes: 7c85c448e7d74 ("selftests/bpf: test_verifier, check bpf_map_lookup_elem access in bpf prog") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID subsystem fixes from Jiri Kosina: - two device-specific quirks from Hans de Goede and Nic Soudée - reintroduction of (mistakenly remocved) ABS_RESERVED from Peter Hutterer * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: Input: restore EV_ABS ABS_RESERVED HID: quirks: fix RetroUSB.com devices HID: ite: Add USB id match for another ITE based keyboard rfkill key quirk
2018-12-10Merge tag 'backlight-fixes-4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight fix from Lee Jones: "Fix brightness levels when !DT in pwm_bl driver" * tag 'backlight-fixes-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Fix brightness levels for non-DT case.
2018-12-10bpf: relax verifier restriction on BPF_MOV | BPF_ALUJiong Wang
Currently, the destination register is marked as unknown for 32-bit sub-register move (BPF_MOV | BPF_ALU) whenever the source register type is SCALAR_VALUE. This is too conservative that some valid cases will be rejected. Especially, this may turn a constant scalar value into unknown value that could break some assumptions of verifier. For example, test_l4lb_noinline.c has the following C code: struct real_definition *dst 1: if (!get_packet_dst(&dst, &pckt, vip_info, is_ipv6)) 2: return TC_ACT_SHOT; 3: 4: if (dst->flags & F_IPV6) { get_packet_dst is responsible for initializing "dst" into valid pointer and return true (1), otherwise return false (0). The compiled instruction sequence using alu32 will be: 412: (54) (u32) r7 &= (u32) 1 413: (bc) (u32) r0 = (u32) r7 414: (95) exit insn 413, a BPF_MOV | BPF_ALU, however will turn r0 into unknown value even r7 contains SCALAR_VALUE 1. This causes trouble when verifier is walking the code path that hasn't initialized "dst" inside get_packet_dst, for which case 0 is returned and we would then expect verifier concluding line 1 in the above C code pass the "if" check, therefore would skip fall through path starting at line 4. Now, because r0 returned from callee has became unknown value, so verifier won't skip analyzing path starting at line 4 and "dst->flags" requires dereferencing the pointer "dst" which actually hasn't be initialized for this path. This patch relaxed the code marking sub-register move destination. For a SCALAR_VALUE, it is safe to just copy the value from source then truncate it into 32-bit. A unit test also included to demonstrate this issue. This test will fail before this patch. This relaxation could let verifier skipping more paths for conditional comparison against immediate. It also let verifier recording a more accurate/strict value for one register at one state, if this state end up with going through exit without rejection and it is used for state comparison later, then it is possible an inaccurate/permissive value is better. So the real impact on verifier processed insn number is complex. But in all, without this fix, valid program could be rejected. >From real benchmarking on kernel selftests and Cilium bpf tests, there is no impact on processed instruction number when tests ares compiled with default compilation options. There is slightly improvements when they are compiled with -mattr=+alu32 after this patch. Also, test_xdp_noinline/-mattr=+alu32 now passed verification. It is rejected before this fix. Insn processed before/after this patch: default -mattr=+alu32 Kernel selftest === test_xdp.o 371/371 369/369 test_l4lb.o 6345/6345 5623/5623 test_xdp_noinline.o 2971/2971 rejected/2727 test_tcp_estates.o 429/429 430/430 Cilium bpf === bpf_lb-DLB_L3.o: 2085/2085 1685/1687 bpf_lb-DLB_L4.o: 2287/2287 1986/1982 bpf_lb-DUNKNOWN.o: 690/690 622/622 bpf_lxc.o: 95033/95033 N/A bpf_netdev.o: 7245/7245 N/A bpf_overlay.o: 2898/2898 3085/2947 NOTE: - bpf_lxc.o and bpf_netdev.o compiled by -mattr=+alu32 are rejected by verifier due to another issue inside verifier on supporting alu32 binary. - Each cilium bpf program could generate several processed insn number, above number is sum of them. v1->v2: - Restrict the change on SCALAR_VALUE. - Update benchmark numbers on Cilium bpf tests. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-10Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "The usual batch; most of them are DT tweaks to fix misdescribed hardware. Beyond that: - A bugfix for MMP2 CPU detection, it's been there quite a while but makes sense to fix now anyway. - Some power management tweaks: + disabling of CPU idle power state on Marvell Armada 7K/8K (Macchiatobin et al) + Increase of minimum voltage on BananaPi M3 + Tweak of power ramp time for DVFS on NXP/Freescale i.MX7SX - A couple of MAINTAINER updates: + MMP has a new volunteer to look after it + Mediatek adds a few keywords, IRC channel and wiki URL" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock ARM: imx: update the cpu power up timing setting on i.mx6sx Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K" ARM: dts: imx7d-pico: Describe the Wifi clock ARM: dts: realview: Fix some more duplicate regulator nodes MAINTAINERS: update entry for MMP platform ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt MAINTAINERS: mediatek: Update SoC entry ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs arm64: dts: mt7622: Drop the general purpose timer node arm64: dts: mt7622: fix no more console output on BPI-R64 board arm64: dts: mt7622: fix no more console output on rfb1 ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V
2018-12-10backlight: pwm_bl: Fix brightness levels for non-DT case.Enric Balletbo i Serra
Commit '88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye")' allows the possibility to compute a default brightness table when there isn't the brightness-levels property in the DT. Unfortunately the changes made broke the pwm backlight for the non-DT boards. Usually, the non-DT boards don't pass the brightness levels via platform data, instead, it sets the max_brightness in their platform data and the driver calculates the level without a table. The offending patch assumed that when there is no brightness levels table we should create one, but this is clearly wrong for the non-DT case. After this patch the code handles the DT and the non-DT case taking in consideration also if max_brightness is set or not. Fixes: 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye") Reported-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-12-10xfrm: clean an indentation issue, remove a spaceColin Ian King
Trivial fix to clean up indentation issue, remove an extraneous space. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-12-10ALSA: hda/realtek: Enable audio jacks of ASUS UX433FN/UX333FA with ALC294Jian-Hong Pan
The ASUS UX433FN and UX333FA with ALC294 cannot detect the headset MIC and output through the internal speaker and the headphone until ALC294_FIXUP_ASUS_SPK and ALC294_FIXUP_ASUS_HEADSET_MIC quirk applied. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-10ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294Jian-Hong Pan
The ASUS UX533FD with ALC294 cannot detect the headset MIC and outputs through the internal speaker and the headphone until ALC294_FIXUP_ASUS_SPK and ALC294_FIXUP_ASUS_HEADSET_MIC quirk applied. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-10ALSA: hda/realtek: ALC294 mic and headset-mode fixups for ASUS X542UNChris Chiu
The known ALC256_FIXUP_ASUS_MIC fixup can fix the headphone jack sensing and enable use of the internal microphone on this laptop X542UN. However, it's ALC294 so create a new fixup named ALC294_FIXUP_ASUS_MIC to avoid confusion. Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Chris Chiu <chiu@endlessm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-10USB: serial: option: add HP lt4132Tore Anderson
The HP lt4132 is a rebranded Huawei ME906s-158 LTE modem. The interface with protocol 0x16 is "CDC ECM & NCM" according to the *.inf files included with the Windows driver. Attaching the option driver to it doesn't result in a /dev/ttyUSB* device being created, so I've excluded it. Note that it is also excluded for corresponding Huawei-branded devices, cf. commit d544db293a44 ("USB: support new huawei devices in option.c"). T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=03f0 ProdID=a31d Rev=01.02 S: Manufacturer=HP Inc. S: Product=HP lt4132 LTE/HSPA+ 4G Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=06 Prot=16 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=03f0 ProdID=a31d Rev=01.02 S: Manufacturer=HP Inc. S: Product=HP lt4132 LTE/HSPA+ 4G Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option I: If#=0x6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=03f0 ProdID=a31d Rev=01.02 S: Manufacturer=HP Inc. S: Product=HP lt4132 LTE/HSPA+ 4G Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 3 Cfg#= 3 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option Signed-off-by: Tore Anderson <tore@fud.no> Cc: stable@vger.kernel.org [ johan: drop id defines ] Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-10fuse: Fix memory leak in fuse_dev_free()Takeshi Misawa
When ntfs is unmounted, the following leak is reported by kmemleak. kmemleak report: unreferenced object 0xffff880052bf4400 (size 4096): comm "mount.ntfs", pid 16530, jiffies 4294861127 (age 3215.836s) hex dump (first 32 bytes): 00 44 bf 52 00 88 ff ff 00 44 bf 52 00 88 ff ff .D.R.....D.R.... 10 44 bf 52 00 88 ff ff 10 44 bf 52 00 88 ff ff .D.R.....D.R.... backtrace: [<00000000bf4a2f8d>] fuse_fill_super+0xb22/0x1da0 [fuse] [<000000004dde0f0c>] mount_bdev+0x263/0x320 [<0000000025aebc66>] mount_fs+0x82/0x2bf [<0000000042c5a6be>] vfs_kern_mount.part.33+0xbf/0x480 [<00000000ed10cd5b>] do_mount+0x3de/0x2ad0 [<00000000d59ff068>] ksys_mount+0xba/0xd0 [<000000001bda1bcc>] __x64_sys_mount+0xba/0x150 [<00000000ebe26304>] do_syscall_64+0x151/0x490 [<00000000d25f2b42>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000002e0abd2c>] 0xffffffffffffffff fuse_dev_alloc() allocate fud->pq.processing. But this hash table is not freed. Fix this by freeing fud->pq.processing. Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: be2ff42c5d6e ("fuse: Use hash table to link processing request")
2018-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several conflicts, seemingly all over the place. I used Stephen Rothwell's sample resolutions for many of these, if not just to double check my own work, so definitely the credit largely goes to him. The NFP conflict consisted of a bug fix (moving operations past the rhashtable operation) while chaning the initial argument in the function call in the moved code. The net/dsa/master.c conflict had to do with a bug fix intermixing of making dsa_master_set_mtu() static with the fixing of the tagging attribute location. cls_flower had a conflict because the dup reject fix from Or overlapped with the addition of port range classifiction. __set_phy_supported()'s conflict was relatively easy to resolve because Andrew fixed it in both trees, so it was just a matter of taking the net-next copy. Or at least I think it was :-) Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup() intermixed with changes on how the sdif and caller_net are calculated in these code paths in net-next. The remaining BPF conflicts were largely about the addition of the __bpf_md_ptr stuff in 'net' overlapping with adjustments and additions to the relevant data structure where the MD pointer macros are used. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10powerpc/ptrace: replace ptrace_report_syscall() with a tracehook callElvira Khabirova
Arch code should use tracehook_*() helpers, as documented in include/linux/tracehook.h, ptrace_report_syscall() is not expected to be used outside that file. The patch does not look very nice, but at least it is correct and opens the way for PTRACE_GET_SYSCALL_INFO API. Co-authored-by: Dmitry V. Levin <ldv@altlinux.org> Fixes: 5521eb4bca2d ("powerpc/ptrace: Add support for PTRACE_SYSEMU") Signed-off-by: Elvira Khabirova <lineprinter@altlinux.org> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> [mpe: Take this as a minimal fix for 4.20, we'll rework it later] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-09net/mlx5: Move flow counters data structures from flow steering headerSaeed Mahameed
After the following flow counters API refactoring: ("net/mlx5: Use flow counter IDs and not the wrapping cache object") flow counters private data structures mlx5_fc_cache and mlx5_fc are redundantly exposed in fs_core.h, they have nothing to do with flow steering core and they are private to fs_counter.c, this patch moves them to where they belong and reduces their exposure in the driver. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-09IB/mlx5: Use helper to get CQE opcodeTariq Toukan
Use the new helper that extracts the opcode from a CQE (completion queue entry) structure. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com>
2018-12-09net/mlx5: Use helper to get CQE opcodeTariq Toukan
Introduce and use a helper that extracts the opcode from a CQE (completion queue entry) structure. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-09net/mlx5: When fetching CQEs return CQE instead of void pointerDaniel Jurgens
The function is only used to retrieve CQEs, use the proper type as the return value. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-12-09Linux 4.20-rc6v4.20-rc6Linus Torvalds
2018-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "A decent batch of fixes here. I'd say about half are for problems that have existed for a while, and half are for new regressions added in the 4.20 merge window. 1) Fix 10G SFP phy module detection in mvpp2, from Baruch Siach. 2) Revert bogus emac driver change, from Benjamin Herrenschmidt. 3) Handle BPF exported data structure with pointers when building 32-bit userland, from Daniel Borkmann. 4) Memory leak fix in act_police, from Davide Caratti. 5) Check RX checksum offload in RX descriptors properly in aquantia driver, from Dmitry Bogdanov. 6) SKB unlink fix in various spots, from Edward Cree. 7) ndo_dflt_fdb_dump() only works with ethernet, enforce this, from Eric Dumazet. 8) Fix FID leak in mlxsw driver, from Ido Schimmel. 9) IOTLB locking fix in vhost, from Jean-Philippe Brucker. 10) Fix SKB truesize accounting in ipv4/ipv6/netfilter frag memory limits otherwise namespace exit can hang. From Jiri Wiesner. 11) Address block parsing length fixes in x25 from Martin Schiller. 12) IRQ and ring accounting fixes in bnxt_en, from Michael Chan. 13) For tun interfaces, only iface delete works with rtnl ops, enforce this by disallowing add. From Nicolas Dichtel. 14) Use after free in liquidio, from Pan Bian. 15) Fix SKB use after passing to netif_receive_skb(), from Prashant Bhole. 16) Static key accounting and other fixes in XPS from Sabrina Dubroca. 17) Partially initialized flow key passed to ip6_route_output(), from Shmulik Ladkani. 18) Fix RTNL deadlock during reset in ibmvnic driver, from Thomas Falcon. 19) Several small TCP fixes (off-by-one on window probe abort, NULL deref in tail loss probe, SNMP mis-estimations) from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits) net/sched: cls_flower: Reject duplicated rules also under skip_sw bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips. bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips. bnxt_en: Keep track of reserved IRQs. bnxt_en: Fix CNP CoS queue regression. net/mlx4_core: Correctly set PFC param if global pause is turned off. Revert "net/ibm/emac: wrong bit is used for STA control" neighbour: Avoid writing before skb->head in neigh_hh_output() ipv6: Check available headroom in ip6_xmit() even without options tcp: lack of available data can also cause TSO defer ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl mlxsw: spectrum_router: Relax GRE decap matching check mlxsw: spectrum_switchdev: Avoid leaking FID's reference count mlxsw: spectrum_nve: Remove easily triggerable warnings ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes sctp: frag_point sanity check tcp: fix NULL ref in tail loss probe tcp: Do not underestimate rwnd_limited net: use skb_list_del_init() to remove from RX sublists ...
generated by cgit (git 2.34.1) at 2025-09-15 00:03:21 +0000