summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-15Merge branch 'fixes' into for-gregFelipe Balbi
2011-08-12usb: musb: gadget: fix error pathSebastian Andrzej Siewior
In case one "forgot" to load the receiver i.e. doing |modprobe omap2430 |modprobe musb_hdrc he ends up with: |musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) |HS USB OTG: no transceiver configured |musb-hdrc musb-hdrc: musb_init_controller failed with status -19 |(NULL device *): gadget not registered. |Unable to handle kernel NULL pointer dereference at virtual address 0000001c |Internal error: Oops: 17 [#1] SMP |[<c011383c>] (sysfs_find_dirent+0x4/0x60) from [<c01138c0>] (sysfs_get_dirent+0x28/0x78) |[<c01138c0>] (sysfs_get_dirent+0x28/0x78) from [<c0115b78>] (sysfs_unmerge_group+0x1c/0x90) |[<c0115b78>] (sysfs_unmerge_group+0x1c/0x90) from [<c0179ba4>] (dpm_sysfs_remove+0x14/0x3c) |[<c0179ba4>] (dpm_sysfs_remove+0x14/0x3c) from [<c01742f8>] (device_del+0x40/0x1b4) |[<c01742f8>] (device_del+0x40/0x1b4) from [<c0174478>] (device_unregister+0xc/0x18) |[<c0174478>] (device_unregister+0xc/0x18) from [<bf0489b4>] (musb_free+0x24/0x88 [musb_hdrc]) |[<bf0489b4>] (musb_free+0x24/0x88 [musb_hdrc]) from [<bf057d18>] (musb_probe+0xb50/0xe3c [musb_hdrc]) |[<bf057d18>] (musb_probe+0xb50/0xe3c [musb_hdrc]) from [<c01779c4>] (platform_drv_probe+0x1c/0x24) The problem is that musb_free() tries to figure out what was initializued and what wasn't and clean up only the initialized part. This works well for usb_del_gadget_udc() but device_unregister() can't deal with it. Therefore we rely on the fact the we always have a parent device and only then remove the device. I broke this in 0f91349 ("usb: gadget: convert all users to the new udc infrastructure") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: gadget: f_phonet: unlock in error caseSebastian Andrzej Siewior
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: blackfin: include prefetch head fileBob Liu
After the prefetch/list.h restructure, drivers need to explicitly include linux/prefetch.h in order to use the prefetch() function. Otherwise, the current driver fails to build: drivers/usb/musb/blackfin.c: In function 'musb_write_fifo': drivers/usb/musb/blackfin.c:43: error: implicit declaration of function 'prefetch' Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: tusb6010: fix compilationFelipe Balbi
earlier commits have broken compilation of tusb6010 glue layer, fix it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: gadget: renesas_usbhs: fix DMA build by including dma-mapping.hKuninori Morimoto
Include dma-mapping.h to fix build of the renesas_usbhs driver | CC drivers/usb/renesas_usbhs/mod_gadget.o | drivers/usb/renesas_usbhs/mod_gadget.c: In function 'usbhsg_dma_map': | drivers/usb/renesas_usbhs/mod_gadget.c:190: error: implicit declaration of function 'dma_map_single' | drivers/usb/renesas_usbhs/mod_gadget.c:192: error: implicit declaration of function 'dma_sync_single_for_device' | drivers/usb/renesas_usbhs/mod_gadget.c:196: error: implicit declaration of function 'dma_mapping_error' | drivers/usb/renesas_usbhs/mod_gadget.c: In function 'usbhsg_dma_unmap': | drivers/usb/renesas_usbhs/mod_gadget.c:217: error: implicit declaration of function 'dma_unmap_single' | drivers/usb/renesas_usbhs/mod_gadget.c:219: error: implicit declaration of function 'dma_sync_single_for_cpu' | make[5]: *** [drivers/usb/renesas_usbhs/mod_gadget.o] Error 1 | make[4]: *** [drivers/usb/renesas_usbhs] Error 2 Reported-by: Magnus Damm <damm@opensource.se> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: cppi: fix build errors due to DBG and missing musb variablePer Forlin
Replace DBG with dev_dbg and fix invalid access of musb->controller. With this patch cppi_dma builds successfully. Cc: <stable@kernel.org> Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: ux500: replace missing DBG with dev_dbgPer Forlin
ux500_dma.c fail to compile becase DBG has been removed from musb_debug. Use dev_dbg for all prints. Cc: stable@vger.kernel.org Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Mian Yousaf Kaukab<mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: ux500: set dma config for both src and dstPer Forlin
The dma driver requires both src and dst to be set. This fix is needed in order to run gadget mass storage. Patch is verified on snowball. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: fix oops on musb_gadget_pullupJohn Stultz
an 'unhandled fault' is causes when a gadget driver calls usb_gadget_connect() while the USB cable isn't plugged into the OTG port. the fault is caused by an access to MUSB's memory space while its clock is turned off due to pm_runtime kicking in. in order to fix the fault, we enclose musb_gadget_pullup() with pm_runtime_get_sync() ... pm_runtime_put() calls to be sure we will always reach that path with clock turned on. [ balbi@ti.com : simplified commit log; removed few things which didn't belong there ] Cc: stable@kernel.org Reported-by: Zach Pfeffer <zach.pfeffer@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: host: ehci-omap: fix .remove and failure handling path of .probe(v1)Ming Lei
Obviously, disabling & put regulator and iounmap(hcd->regs) are missed in .remove and failure handling path of .probe, so add them. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Keshava Munegowda <Keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: gadget: hid: don't STALL when processing a HID Descriptor requestSebastian Bauer
This is a patch to fix an issue with the HID gadget which, at the moment, returns STALL on a HID descriptor request. Essentially, the patch changes the hid gadget such that a request for the HID descriptor is handled by copying the descriptor into the response buffer, rather than falling through the default case, in which the request is answered by a STALL. Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: fix KconfigRabin Vincent
After 622859634 (usb: musb: drop a gigantic amount of ifdeferry): - USB_GADGET_MUSB_HDRC is no longer selectable because it depends on the removed USB_MUSB_PERIPHERAL and USB_MUSB_OTG options - The Kconfig comment still says "Enable Host or Gadget support to see Inventra options", even though you now need to enable both of them to see Inventra options. Fix the dependency and drop the anyway unnecessary comment. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: musb: tusb6010_omap: fix build failure: error: 'musb' undeclaredSergei Trofimovich
CC drivers/usb/musb/tusb6010_omap.o drivers/usb/musb/tusb6010_omap.c: In function 'tusb_omap_use_shared_dmareq': drivers/usb/musb/tusb6010_omap.c:92: error: 'musb' undeclared (first use in this function) drivers/usb/musb/tusb6010_omap.c:92: error: (Each undeclared identifier is reported only once drivers/usb/musb/tusb6010_omap.c:92: error: for each function it appears in.) Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: gadget: composite: fix bMaxPacketSize for SuperSpeedSebastian Andrzej Siewior
For bMaxPacketSize0 we usually take what is specified in ep0->maxpacket. This is fine in most cases, however on SuperSpeed bMaxPacketSize0 specifies the exponent instead of the actual size in bytes. The only valid value on SS is 9 which denotes 512 bytes. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: gadget: fusb300: remove #if 0 blockSebastian Andrzej Siewior
The code in this block is unused and the Author is fine with removing: | These functions were used to debug unstable hw fifo while developing | fusb300. It's much more stable now. | So these functions can be removed. Cc: "Wendy Yuan-Hsin Chen" <yhchen@faraday-tech.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-12usb: gadget: s3c2410_udc: fix unterminated platform_device_id tableAxel Lin
platform_device_id structures need a NULL terminating entry, add it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-10USB: Serial: Add PID(0xF7C0) to FTDI SIO driver for a zeitcontrol-deviceArtur Zimmer
Here is a patch for a new PID (zeitcontrol-device mifare-reader FT232BL(like FT232BM but lead free)). Signed-off-by: Artur Zimmer <artur128@3dzimmer.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-10USB: Serial: Add device ID for Sierra Wireless MC8305Florian Echtler
A new device ID pair is added for Sierra Wireless MC8305. Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: Serial: Added device ID for Qualcomm Modem in Sagemcom's HiLo3GVijay Chavan
A new device ID pair is added for Qualcomm Modem present in Sagemcom's HiLo3G module. Signed-off-by: Vijay Chavan <VijayChavan007@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08usb/host/pci-quirks.c: correct annotation of `ehci_dmi_nohandoff_table'Arnaud Lacombe
ehci_bios_handoff() is marked __devinit, `ehci_dmi_nohandoff_table' should be marked __devinitconst, not __initconst. This fixes the following section mismatch: WARNING: vmlinux.o(.devinit.text+0x4f08): Section mismatch in reference from the function ehci_bios_handoff() to the variable .init.rodata:ehci_dmi_nohandoff_table The function __devinit ehci_bios_handoff() references a variable __initconst ehci_dmi_nohandoff_table. If ehci_dmi_nohandoff_table is only used by ehci_bios_handoff then annotate ehci_dmi_nohandoff_table with a matching annotation. Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: option driver: add PID for Vodafone-Huawei K4511Andrew Bird
This patch adds the product ID of Huawei's Vodafone K4511 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: option driver: add PID for Vodafone-Huawei K4510Andrew Bird
This patch adds the product ID of Huawei's Vodafone K4510 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: option driver: add PID for Vodafone-Huawei K3771Andrew Bird
This patch adds the product ID of Huawei's Vodafone K3771 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: option driver: add PID for Vodafone-Huawei K3770Andrew Bird
This patch adds the product ID of Huawei's Vodafone K3770 mobile broadband modem to option.c. This is necessary so that the driver gets loaded on demand without the intervention of usb_modeswitch. This has the benefit of it becoming available faster and also ensures that the option driver is not bound to a network interface that should be claimed by cdc_ether. Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08usb: serial: ftdi_sio.c: For the FT232H FTDI_SIO_SET_BAUDRATE_REQUEST, index ↵Uwe Bonnes
needs to be shifted too the recent addition of the FT232H showed that baudrate was set wrong. See gmane.linux.usb.general: "[ftdi_sio] FT232H support". With the old code, the MSB of the 4 encoded fractional divider bits and more important the clock predivider bits got lost. Adding the FT232H to the code patch were these bits are shifted solves the problem. I verified baud rates with a scope now. I suspect, that the BM device probably needs these bits shifted too. But there is no predivider bit, so this is not obvious, and a missing MSB of the encoded fractional divider only shifts the resulting baudrate minimal. The AM has only 3 bits of encoded fractional divider, so it is not impacted. I have no BM device to test, so I only added a comment and left the code for the BM untouched. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08usb/isp1760: Added missing call to usb_hcd_check_unlink_urb() during unlinkArvid Brodin
Signed-off-by: Arvid Brodin <arvid.brodin@enea.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: EHCI: Fix test mode sequenceBoris Todorov
The sequence to put port in test mode is not complete. According EHCI specification all enabled ports must be put in suspend. Signed-off-by: Boris Todorov <boris.st.todorov@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: ftdi_sio: fix minor typo in get_ftdi_divisorIonut Nicu
Even if it's unlikely for this to cause an error, there is a typo in the code that uses the bitwise-AND operator instead of the logical one. Signed-off-by: Ionut Nicu <ionut.nicu@cloudbit.ro> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: at91_udc: include linux/prefetch.h explicitlyJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: usb-storage: unusual_devs entry for ARM V2M motherboard.Nick Bowler
Connecting the V2M to a Linux host results in a constant stream of errors spammed to the console, all of the form sd 1:0:0:0: ioctl_internal_command return code = 8070000 : Sense Key : 0x4 [current] : ASC=0x0 ASCQ=0x0 The errors appear to be otherwise harmless. Add an unusual_devs entry which eliminates all of the error messages. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08usb/ehci-mxc: add missing inclusion of mach/hardware.hShawn Guo
As cpu_is_mx stuff is being used in the driver, header mach/hardware.h should be explicitly included. The missing of the header is causing today's linux-next build error as bleow. CC drivers/usb/host/ehci-hcd.o In file included from linux-next/drivers/usb/host/ehci-hcd.c:1190:0: linux-next/drivers/usb/host/ehci-mxc.c: In function 'ehci_mxc_drv_probe': linux-next/drivers/usb/host/ehci-mxc.c:175:2: error: implicit declaration of function 'cpu_is_mx35' linux-next/drivers/usb/host/ehci-mxc.c:175:2: error: implicit declaration of function 'cpu_is_mx25' linux-next/drivers/usb/host/ehci-mxc.c:185:2: error: implicit declaration of function 'cpu_is_mx51' Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08USB: assign instead of equal in usbtmc.cMaxim Nikulin
Assign operator instead of equality test in the usbtmc_ioctl_abort_bulk_in() function. Signed-off-by: Maxim A. Nikulin <M.A.Nikulin@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08usb: renesas_usbhs: fixup usbhsg_for_each_uep 1st posKuninori Morimoto
1st pos of __usbhsg_for_each_uep() was wrong. Expected uep were ep1, ep2, ep3... but each uep were ep0, ep2, ep3 ... This patch modify it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08usb: renesas_usbhs: fix DMA build by including dma-mapping.hKuninori Morimoto
Include dma-mapping.h to fix build of the renesas_usbhs driver CC drivers/usb/renesas_usbhs/mod_gadget.o drivers/usb/renesas_usbhs/mod_gadget.c: In function 'usbhsg_dma_map': drivers/usb/renesas_usbhs/mod_gadget.c:190: error: implicit declaration of function 'dma_map_single' drivers/usb/renesas_usbhs/mod_gadget.c:192: error: implicit declaration of function 'dma_sync_single_for_device' drivers/usb/renesas_usbhs/mod_gadget.c:196: error: implicit declaration of function 'dma_mapping_error' drivers/usb/renesas_usbhs/mod_gadget.c: In function 'usbhsg_dma_unmap': drivers/usb/renesas_usbhs/mod_gadget.c:217: error: implicit declaration of function 'dma_unmap_single' drivers/usb/renesas_usbhs/mod_gadget.c:219: error: implicit declaration of function 'dma_sync_single_for_cpu' make[5]: *** [drivers/usb/renesas_usbhs/mod_gadget.o] Error 1 make[4]: *** [drivers/usb/renesas_usbhs] Error 2 Reported-by: Magnus Damm <damm@opensource.se> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-08usb: gadget: net2272 - Correct includesGeert Uytterhoeven
<linux/irq.h> states: * Please do not include this file in generic code. There is currently * no requirement for any architecture to implement anything held * within this file. prefetch() and prefetchw() need <linux/prefetch.h> on m68k: drivers/usb/gadget/net2272.c: In function ‘net2272_write_fifo’: drivers/usb/gadget/net2272.c:468: error: implicit declaration of function ‘prefetch’ drivers/usb/gadget/net2272.c: In function ‘net2272_read_fifo’: drivers/usb/gadget/net2272.c:574: error: implicit declaration of function ‘prefetchw’ Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-07Merge 3.1-rc1 into usb-linusGreg Kroah-Hartman
Gives us a good starting point to base patches off of. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-07Linux 3.1-rc1v3.1-rc1Linus Torvalds
2011-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Fix build with DEBUG_PAGEALLOC enabled.
2011-08-07sh: Fix boot crash related to SCIRafael J. Wysocki
Commit d006199e72a9 ("serial: sh-sci: Regtype probing doesn't need to be fatal.") made sci_init_single() return when sci_probe_regmap() succeeds, although it should return when sci_probe_regmap() fails. This causes systems using the serial sh-sci driver to crash during boot. Fix the problem by using the right return condition. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07arm: remove stale export of 'sha_transform'Linus Torvalds
The generic library code already exports the generic function, this was left-over from the ARM-specific version that just got removed. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07arm: remove "optimized" SHA1 routinesLinus Torvalds
Since commit 1eb19a12bd22 ("lib/sha1: use the git implementation of SHA-1"), the ARM SHA1 routines no longer work. The reason? They depended on the larger 320-byte workspace, and now the sha1 workspace is just 16 words (64 bytes). So the assembly version would overwrite the stack randomly. The optimized asm version is also probably slower than the new improved C version, so there's no reason to keep it around. At least that was the case in git, where what appears to be the same assembly language version was removed two years ago because the optimized C BLK_SHA1 code was faster. Reported-and-tested-by: Joachim Eastwood <manabian@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07fix rcu annotations noise in cred.hAl Viro
task->cred is declared as __rcu, and access to other tasks' ->cred is, indeed, protected. Access to current->cred does not need rcu_dereference() at all, since only the task itself can change its ->cred. sparse, of course, has no way of knowing that... Add force-cast in current_cred(), make current_fsuid() et.al. use it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07vfs: rename 'do_follow_link' to 'should_follow_link'Linus Torvalds
Al points out that the do_follow_link() helper function really is misnamed - it's about whether we should try to follow a symlink or not, not about actually doing the following. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07Fix POSIX ACL permission checkAri Savolainen
After commit 3567866bf261: "RCUify freeing acls, let check_acl() go ahead in RCU mode if acl is cached" posix_acl_permission is being called with an unsupported flag and the permission check fails. This patch fixes the issue. Signed-off-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-06Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds
* 'for-linus' of git://git.open-osd.org/linux-open-osd: ore: Make ore its own module exofs: Rename raid engine from exofs/ios.c => ore exofs: ios: Move to a per inode components & device-table exofs: Move exofs specific osd operations out of ios.c exofs: Add offset/length to exofs_get_io_state exofs: Fix truncate for the raid-groups case exofs: Small cleanup of exofs_fill_super exofs: BUG: Avoid sbi realloc exofs: Remove pnfs-osd private definitions nfs_xdr: Move nfs4_string definition out of #ifdef CONFIG_NFS_V4
2011-08-06vfs: optimize inode cache access patternsLinus Torvalds
The inode structure layout is largely random, and some of the vfs paths really do care. The path lookup in particular is already quite D$ intensive, and profiles show that accessing the 'inode->i_op->xyz' fields is quite costly. We already optimized the dcache to not unnecessarily load the d_op structure for members that are often NULL using the DCACHE_OP_xyz bits in dentry->d_flags, and this does something very similar for the inode ops that are used during pathname lookup. It also re-orders the fields so that the fields accessed by 'stat' are together at the beginning of the inode structure, and roughly in the order accessed. The effect of this seems to be in the 1-2% range for an empty kernel "make -j" run (which is fairly kernel-intensive, mostly in filename lookup), so it's visible. The numbers are fairly noisy, though, and likely depend a lot on exact microarchitecture. So there's more tuning to be done. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-06vfs: renumber DCACHE_xyz flags, remove some stale onesLinus Torvalds
Gcc tends to generate better code with small integers, including the DCACHE_xyz flag tests - so move the common ones to be first in the list. Also just remove the unused DCACHE_INOTIFY_PARENT_WATCHED and DCACHE_AUTOFS_PENDING values, their users no longer exists in the source tree. And add a "unlikely()" to the DCACHE_OP_COMPARE test, since we want the common case to be a nice straight-line fall-through. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Compute protocol sequence numbers and fragment IDs using MD5. crypto: Move md5_transform to lib/md5.c
2011-08-06ore: Make ore its own moduleBoaz Harrosh
Export everything from ore need exporting. Change Kbuild and Kconfig to build ore.ko as an independent module. Import ore from exofs Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
generated by cgit (git 2.34.1) at 2025-09-16 12:11:53 +0000