| Age | Commit message (Collapse) | Author |
|---|
|
amifd.h and amifdreg.h are only used from amiflop.c, and they're pretty
small, so move the contents to amiflop.c and get rid of the .h files.
This is preparation for adding a struct blk_mq_tag_set to struct
amiga_floppy_struct.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pretty simple conversion. grab_drive() could probably be replaced by
some freeze/quiesce incantation, but I left it alone, and just used
freeze/quiesce for eject. Compile-tested only.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Converted to blk_mq_init_sq_queue().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The driver doesn't have support for removing a device that has already
been configured, but with more careful ordering we can avoid the need
for that and make sure that we don't leak generic resources.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only interesting thing here is that there may be two floppies (i.e.,
request queues) sharing the same controller, so we use the global struct
swim_priv->lock to check whether the controller is busy. Compile-tested
only.
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Converted to blk_mq_init_sq_queue()
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we fail to allocate the request queue for a disk, we still need to
free that disk, not just the previous ones. Additionally, we need to
cleanup the previous request queues.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On x86 we cannot do fetch_or() with a single instruction and thus end up
using a cmpxchg loop, this reduces determinism. Replace the fetch_or()
with a composite operation: tas-pending + load.
Using two instructions of course opens a window we previously did not
have. Consider the scenario:
CPU0 CPU1 CPU2
1) lock
trylock -> (0,0,1)
2) lock
trylock /* fail */
3) unlock -> (0,0,0)
4) lock
trylock -> (0,0,1)
5) tas-pending -> (0,1,1)
load-val <- (0,1,0) from 3
6) clear-pending-set-locked -> (0,0,1)
FAIL: _2_ owners
where 5) is our new composite operation. When we consider each part of
the qspinlock state as a separate variable (as we can when
_Q_PENDING_BITS == 8) then the above is entirely possible, because
tas-pending will only RmW the pending byte, so the later load is able
to observe prior tail and lock state (but not earlier than its own
trylock, which operates on the whole word, due to coherence).
To avoid this we need 2 things:
- the load must come after the tas-pending (obviously, otherwise it
can trivially observe prior state).
- the tas-pending must be a full word RmW instruction, it cannot be an XCHGB for
example, such that we cannot observe other state prior to setting
pending.
On x86 we can realize this by using "LOCK BTS m32, r32" for
tas-pending followed by a regular load.
Note that observing later state is not a problem:
- if we fail to observe a later unlock, we'll simply spin-wait for
that store to become visible.
- if we observe a later xchg_tail(), there is no difference from that
xchg_tail() having taken place before the tas-pending.
Suggested-by: Will Deacon <will.deacon@arm.com>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: andrea.parri@amarulasolutions.com
Cc: longman@redhat.com
Fixes: 59fb586b4a07 ("locking/qspinlock: Remove unbounded cmpxchg() loop from locking slowpath")
Link: https://lkml.kernel.org/r/20181003130957.183726335@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently the GEN_*_RMWcc() macros include a return statement, which
pretty much mandates we directly wrap them in a (inline) function.
Macros with return statements are tricky and, as per the above, limit
use, so remove the return statement and make them
statement-expressions. This allows them to be used more widely.
Also, shuffle the arguments a bit. Place the @cc argument as 3rd, this
makes it consistent between UNARY and BINARY, but more importantly, it
makes the @arg0 argument last.
Since the @arg0 argument is now last, we can do CPP trickery and make
it an optional argument, simplifying the users; 17 out of 18
occurences do not need this argument.
Finally, change to asm symbolic names, instead of the numeric ordering
of operands, which allows us to get rid of __BINARY_RMWcc_ARG and get
cleaner code overall.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: JBeulich@suse.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: hpa@linux.intel.com
Link: https://lkml.kernel.org/r/20181003130957.108960094@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
While working my way through the code again; I felt the comments could
use help.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andrea.parri@amarulasolutions.com
Cc: longman@redhat.com
Link: https://lkml.kernel.org/r/20181003130257.156322446@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Flip the branch condition after atomic_fetch_or_acquire(_Q_PENDING_VAL)
such that we loose the indent. This also result in a more natural code
flow IMO.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andrea.parri@amarulasolutions.com
Cc: longman@redhat.com
Link: https://lkml.kernel.org/r/20181003130257.156322446@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/infiniband/core/ucm.c:1127 ib_ucm_write() warn: potential
spectre issue 'ucm_cmd_table' [r] (local cap)
Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
unify jump-label work
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The size of the resulting cpu map can be smaller than a multiple of
sizeof(u64), resulting in SIGBUS on cpus like Sparc as the next event
will not be aligned properly.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Fixes: 6c872901af07 ("perf cpu_map: Add cpu_map event synthesize function")
Link: http://lkml.kernel.org/r/20181011.224655.716771175766946817.davem@davemloft.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Memory events depends on PEBS support and access to LDLAT MSR, but we
display them in /sys/devices/cpu/events even if the CPU does not
provide those, like for KVM guests.
That brings the false assumption that those events should be
available, while they fail event to open.
Separating the mem-* events attributes and merging them with
cpu_events only if there's PEBS support detected.
We could also check if LDLAT MSR is available, but the PEBS check
seems to cover the need now.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20180906135748.GC9577@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If there's no tracefs (RHEL7) support the tracing_path_mount
returns debugfs path which results in following fail:
# perf probe sys_write
kprobe_events file does not exist - please rebuild kernel with CONFIG_KPROBE_EVENTS.
Error: Failed to add events.
In tracing_path_debugfs_mount function we need to return the
'tracing' path instead of just the mount to make it work:
# perf probe sys_write
Added new event:
probe:sys_write (on sys_write)
You can now use it in all perf tools, such as:
perf record -e probe:sys_write -aR sleep 1
Adding the 'return tracing_path;' also to tracing_path_tracefs_mount
function just for consistency with tracing_path_debugfs_mount.
Upstream keeps working, because it has the tracefs support.
Link: http://lkml.kernel.org/n/tip-yiwkzexq9fk1ey1xg3gnjlw4@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: 23773ca18b39 ("perf tools: Make perf aware of tracefs")
Link: http://lkml.kernel.org/r/20181016114818.3595-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Andrey reported a build error for the BPF kselftest suite when compiled on
a machine which does not have tls related header bits installed natively:
test_sockmap.c:120:23: fatal error: linux/tls.h: No such file or directory
#include <linux/tls.h>
^
compilation terminated.
Fix it by adding the header to the tools include infrastructure and add
definitions such as SOL_TLS that could potentially be missing.
Fixes: e9dd904708c4 ("bpf: add tls support for testing in test_sockmap")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When a build is run from something like a cron job, the user's $PATH is
rather minimal, of note, not including /usr/sbin in my own case. Because
of that, an automated rpm package build ultimately fails to find
libperf-jvmti.so, because somewhere within the build, this happens...
/bin/sh: alternatives: command not found
/bin/sh: alternatives: command not found
Makefile.config:849: No openjdk development package found, please install
JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel
...and while the build continues, libperf-jvmti.so isn't built, and
things fall down when rpm tries to find all the %files specified. Exact
same system builds everything just fine when the job is launched from a
login shell instead of a cron job, since alternatives is in $PATH, so
openjdk is actually found.
The test required to get into this section of code actually specifies
the full path, as does a block just above it, so let's do that here too.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Fixes: d4dfdf00d43e ("perf jvmti: Plug compilation into perf build")
Link: http://lkml.kernel.org/r/20180906221812.11167-1-jarod@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are two poly_store, but one should have been poly_show.
|adma.c:4382:16: error: conflicting types for 'poly_store'
| static ssize_t poly_store(struct device_driver *dev, const char *buf,
| ^~~~~~~~~~
|adma.c:4363:16: note: previous definition of 'poly_store' was here
| static ssize_t poly_store(struct device_driver *dev, char *buf)
| ^~~~~~~~~~
CC: stable@vger.kernel.org
Fixes: 13efe1a05384 ("dmaengine: ppc4xx: remove DRIVER_ATTR() usage")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Schedule MR cache work only after bucket was initialized.
Cc: <stable@vger.kernel.org> # 4.10
Fixes: 49780d42dfc9 ("IB/mlx5: Expose MR cache for mlx5_ib")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add missing check for failure of cm_init_av_by_path
Fixes: e1444b5a163e ("IB/cm: Fix automatic path migration support")
Reported-by: Slava Shwartsman <slavash@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
IPCB should be cleared before icmp_send, since it may contain data from
previous layers and the data could be misinterpreted as ip header options,
which later caused the ihl to be set to an invalid value and resulted in
the following stack corruption:
[ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping
[ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping
[ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping
[ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping
[ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034387] ==================================================================
[ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310
[ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7
[ 1083.034990]
[ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.19.0-rc5+ #1
[ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib]
[ 1083.035750] Call Trace:
[ 1083.035888] dump_stack+0x9a/0xeb
[ 1083.036031] print_address_description+0xe3/0x2e0
[ 1083.036213] kasan_report+0x18a/0x2e0
[ 1083.036356] ? __ip_options_echo+0xf08/0x1310
[ 1083.036522] __ip_options_echo+0xf08/0x1310
[ 1083.036688] icmp_send+0x7b9/0x1cd0
[ 1083.036843] ? icmp_route_lookup.constprop.9+0x1070/0x1070
[ 1083.037018] ? netif_schedule_queue+0x5/0x200
[ 1083.037180] ? debug_show_all_locks+0x310/0x310
[ 1083.037341] ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120
[ 1083.037519] ? debug_locks_off+0x11/0x80
[ 1083.037673] ? debug_check_no_obj_freed+0x207/0x4c6
[ 1083.037841] ? check_flags.part.27+0x450/0x450
[ 1083.037995] ? debug_check_no_obj_freed+0xc3/0x4c6
[ 1083.038169] ? debug_locks_off+0x11/0x80
[ 1083.038318] ? skb_dequeue+0x10e/0x1a0
[ 1083.038476] ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib]
[ 1083.038642] ? netif_schedule_queue+0xa8/0x200
[ 1083.038820] ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.038996] ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.039174] process_one_work+0x912/0x1830
[ 1083.039336] ? wq_pool_ids_show+0x310/0x310
[ 1083.039491] ? lock_acquire+0x145/0x3a0
[ 1083.042312] worker_thread+0x87/0xbb0
[ 1083.045099] ? process_one_work+0x1830/0x1830
[ 1083.047865] kthread+0x322/0x3e0
[ 1083.050624] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 1083.053354] ret_from_fork+0x3a/0x50
For instance __ip_options_echo is failing to proceed with invalid srr and
optlen passed from another layer via IPCB
[ 762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0
[ 762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533
[ 762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84
[ 762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0
[ 762.140269] ==================================================================
[ 762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0
[ 762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680
[ 762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7
Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Nullify the resource task struct pointer to ensure that subsequent calls
won't try to release task_struct again.
------------[ cut here ]------------
ODEBUG: free active (active state 1) object type: rcu_head hint:
(null)
WARNING: CPU: 0 PID: 6048 at lib/debugobjects.c:329
debug_print_object+0x16a/0x210 lib/debugobjects.c:326
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 6048 Comm: syz-executor022 Not tainted
4.19.0-rc7-next-20181008+ #89
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x244/0x3ab lib/dump_stack.c:113
panic+0x238/0x4e7 kernel/panic.c:184
__warn.cold.8+0x163/0x1ba kernel/panic.c:536
report_bug+0x254/0x2d0 lib/bug.c:186
fixup_bug arch/x86/kernel/traps.c:178 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271
do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290
invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969
RIP: 0010:debug_print_object+0x16a/0x210 lib/debugobjects.c:326
Code: 41 88 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 92 00 00 00 48 8b 14
dd
60 02 41 88 4c 89 fe 48 c7 c7 00 f8 40 88 e8 36 2f b4 fd <0f> 0b 83 05
a9
f4 5e 06 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f
RSP: 0018:ffff8801d8c3eda8 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8164d235 RDI: 0000000000000005
RBP: ffff8801d8c3ede8 R08: ffff8801d70aa280 R09: ffffed003b5c3eda
R10: ffffed003b5c3eda R11: ffff8801dae1f6d7 R12: 0000000000000001
R13: ffffffff8939a760 R14: 0000000000000000 R15: ffffffff8840fca0
__debug_check_no_obj_freed lib/debugobjects.c:786 [inline]
debug_check_no_obj_freed+0x3ae/0x58d lib/debugobjects.c:818
kmem_cache_free+0x202/0x290 mm/slab.c:3759
free_task_struct kernel/fork.c:163 [inline]
free_task+0x16e/0x1f0 kernel/fork.c:457
__put_task_struct+0x2e6/0x620 kernel/fork.c:730
put_task_struct include/linux/sched/task.h:96 [inline]
finish_task_switch+0x66c/0x900 kernel/sched/core.c:2715
context_switch kernel/sched/core.c:2834 [inline]
__schedule+0x8d7/0x21d0 kernel/sched/core.c:3480
schedule+0xfe/0x460 kernel/sched/core.c:3524
freezable_schedule include/linux/freezer.h:172 [inline]
futex_wait_queue_me+0x3f9/0x840 kernel/futex.c:2530
futex_wait+0x45c/0xa50 kernel/futex.c:2645
do_futex+0x31a/0x26d0 kernel/futex.c:3528
__do_sys_futex kernel/futex.c:3589 [inline]
__se_sys_futex kernel/futex.c:3557 [inline]
__x64_sys_futex+0x472/0x6a0 kernel/futex.c:3557
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x446549
Code: e8 2c b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 2b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f3a998f5da8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: ffffffffffffffda RBX: 00000000006dbc38 RCX: 0000000000446549
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006dbc38
RBP: 00000000006dbc30 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc3c
R13: 2f646e6162696e69 R14: 666e692f7665642f R15: 00000000006dbd2c
Kernel Offset: disabled
Reported-by: syzbot+71aff6ea121ffefc280f@syzkaller.appspotmail.com
Fixes: ed7a01fd3fd7 ("RDMA/restrack: Release task struct which was hold by CM_ID object")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Straight forward conversion, using an internal list to enable the
driver to pull requests at will.
Dynamically allocate the tag set to avoid having to pull in the
block headers for blktrans.h, since various mtd drivers use
block conflicting names for defines and functions.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Tested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
HDMI Forum VSDB YCBCR420 deep color capability bits are 2:0. Correct
definitions in the header for the mask to work correctly.
Fixes: e6a9a2c3dc43 ("drm/edid: parse ycbcr 420 deep color information")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107893
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538776335-12569-1-git-send-email-clinton.a.taylor@intel.com
|
|
kbuild robot reports that since commit ce76d938dd98 ("lib: Add memcat_p():
paste 2 pointer arrays together") the ia64/hp/sim/boot fails to link:
> LD arch/ia64/hp/sim/boot/bootloader
> lib/string.o: In function `__memcat_p':
> string.c:(.text+0x1f22): undefined reference to `__kmalloc'
> string.c:(.text+0x1ff2): undefined reference to `__kmalloc'
> make[1]: *** [arch/ia64/hp/sim/boot/Makefile:37: arch/ia64/hp/sim/boot/bootloader] Error 1
The reason is, the above commit, via __memcat_p(), adds a call to
__kmalloc to string.o, which happens to be used in the bootloader, but
there's no kmalloc or slab or anything.
Since the linker would only pull in objects that contain referenced
symbols, moving __memcat_p() to a different compilation unit solves the
problem.
Fixes: ce76d938dd98 ("lib: Add memcat_p(): paste 2 pointer arrays together")
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
perf_event__synthesize_event_update_cpus
John reported crash when recording on an event under PMU with cpumask defined:
root@localhost:~# ./perf_debug_ record -e armv8_pmuv3_0/br_mis_pred/ sleep 1
perf: Segmentation fault
Obtained 9 stack frames.
./perf_debug_() [0x4c5ef8]
[0xffff82ba267c]
./perf_debug_() [0x4bc5a8]
./perf_debug_() [0x419550]
./perf_debug_() [0x41a928]
./perf_debug_() [0x472f58]
./perf_debug_() [0x473210]
./perf_debug_() [0x4070f4]
/lib/aarch64-linux-gnu/libc.so.6(__libc_start_main+0xe0) [0xffff8294c8a0]
Segmentation fault (core dumped)
We synthesize an update event that needs to touch the evsel id array, which is
not defined at that time. Fixing this by forcing the id allocation for events
with their own cpus.
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Fixes: bfd8f72c2778 ("perf record: Synthesize unit/scale/... in event update")
Link: http://lkml.kernel.org/r/20181003212052.GA32371@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more") checks the
transfer flags for URBs submitted from userspace via usbfs. However,
the check for whether the USBDEVFS_URB_SHORT_NOT_OK flag should be
allowed for a control transfer was added in the wrong place, before
the code has properly determined the direction of the control
transfer. (Control transfers are special because for them, the
direction is set by the bRequestType byte of the Setup packet rather
than direction bit of the endpoint address.)
This patch moves code which sets up the allow_short flag for control
transfers down after is_in has been set to the correct value.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+24a30223a4b609bb802e@syzkaller.appspotmail.com
Fixes: 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more")
CC: Oliver Neukum <oneukum@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When there is a mismatch in the CTR_EL0 field, we trap
access to CTR from EL0 on all CPUs to expose the safe
value. However, we could skip trapping on a CPU which
matches the safe value.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
CTR_EL0.IDC reports the data cache clean requirements for instruction
to data coherence. However, if the field is 0, we need to check the
CLIDR_EL1 fields to detect the status of the feature. Currently we
don't do this and generate a warning with tainting the kernel, when
there is a mismatch in the field among the CPUs. Also the userspace
doesn't have a reliable way to check the CLIDR_EL1 register to check
the status.
This patch fixes the problem by checking the CLIDR_EL1 fields, when
(CTR_EL0.IDC == 0) and updates the kernel's copy of the CTR_EL0 for
the CPU with the actual status of the feature. This would allow the
sanity check infrastructure to do the proper checking of the fields
and also allow the CTR_EL0 emulation code to supply the real status
of the feature.
Now, if a CPU has raw CTR_EL0.IDC == 0 and effective IDC == 1 (with
overall system wide IDC == 1), we need to expose the real value to
the user. So, we trap CTR_EL0 access on the CPU which reports incorrect
CTR_EL0.IDC.
Fixes: commit 6ae4b6e057888 ("arm64: Add support for new control bits CTR_EL0.DIC and CTR_EL0.IDC")
Cc: Shanker Donthineni <shankerd@codeaurora.org>
Cc: Philip Elcan <pelcan@codeaurora.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The matches() routine for a capability must honor the "scope"
passed to it and return the proper results.
i.e, when passed with SCOPE_LOCAL_CPU, it should check the
status of the capability on the current CPU. This is used by
verify_local_cpu_capabilities() on a late secondary CPU to make
sure that it's compliant with the established system features.
However, ARM64_HAS_CACHE_{IDC/DIC} always checks the system wide
registers and this could mean that a late secondary CPU could return
"true" (since the CPU hasn't updated the system wide registers yet)
and thus lead the system in an inconsistent state, where
the system assumes it has IDC/DIC feature, while the new CPU
doesn't.
Fixes: commit 6ae4b6e0578886eb36 ("arm64: Add support for new control bits CTR_EL0.DIC and CTR_EL0.IDC")
Cc: Philip Elcan <pelcan@codeaurora.org>
Cc: Shanker Donthineni <shankerd@codeaurora.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Provide a resource managed version of kstrdup_const(). This variant
internally calls devm_kstrdup() on pointers that are outside of
.rodata section and returns the string as is otherwise.
Make devm_kfree() check if the passed pointer doesn't point to .rodata
and if so - don't actually destroy the resource.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Export this routine so that we can use it later in devm_kstrdup_const()
and devm_kfree().
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make devm_kfree() signature uniform with that of kfree(). To avoid
compiler warnings: cast p to (void *) when calling devres_destroy().
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Many bus attributes are write-only, so provide a simple macro for that
to be able to match the other driver core attribute macros.
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The UIO file mask in MAINTAINERS was incorrectly directing UIOVEC
(include/linux/uio.h) patches to Greg.
Tag Al as the UIOVEC maintainer as Ingo and others have explicitly
required his ack before taking architecture patches that touch
lib/iov_iter.c.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Power-saving is causing plops on audio start/stop on Dell Precision T3600
laptops and Intel DZ77BH boards, add these to the power_save blacklist.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If the policy limits change between invocations of cs_dbs_update(),
the requested frequency value stored in dbs_info may not be updated
and the function may use a stale value of it next time. Moreover, if
idle periods are takem into account by cs_dbs_update(), the requested
frequency value stored in dbs_info may be below the min policy limit,
which is incorrect.
To fix these problems, always update the requested frequency value
in dbs_info along with the local copy of it when the previous
requested frequency is beyond the policy limits and avoid decreasing
the requested frequency below the min policy limit when taking
idle periods into account.
Fixes: abb6627910a1 (cpufreq: conservative: Fix next frequency selection)
Fixes: 00bfe05889e9 (cpufreq: conservative: Decrease frequency faster for deferred updates)
Reported-by: Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Waldemar Rymarkiewicz <waldemarx.rymarkiewicz@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
As noticed by Dave Anglin, the last commit introduced a small bug where
the potentially uninitialized r struct is used instead of the regs
pointer as input for unwind_frame_init(). Fix it.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: John David Anglin <dave.anglin@bell.net>
|
|
This patch fixes a minor, incorrect piece of grammar in the UIO howto.
Signed-off-by: Will Korteland <will@korte.land>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clarify the intention that interfaces and upper layers use
regions rather than managers directly.
Rearrange API documentation to better group the API functions
used to create FPGA mgr/bridge/regions and the API used for
programming FPGAs.
Signed-off-by: Alan Tull <atull@kernel.org>
Suggested-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add devm_fpga_region_create() which is the
managed version of fpga_region_create().
Change current region drivers to use
devm_fpga_region_create().
Signed-off-by: Alan Tull <atull@kernel.org>
Suggested-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add devm_fpga_bridge_create() which is the managed
version of fpga_bridge_create().
Change current bridge drivers to use
devm_fpga_bridge_create().
Signed-off-by: Alan Tull <atull@kernel.org>
Suggested-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add devm_fpga_mgr_create() which is the managed
version of fpga_mgr_create().
Change current FPGA manager drivers to use
devm_fpga_mgr_create()
Signed-off-by: Alan Tull <atull@kernel.org>
Suggested-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When an invalid mount option is passed to jffs2, jffs2_parse_options()
will fail and jffs2_sb_info will be freed, but then jffs2_sb_info will
be used (use-after-free) and freeed (double-free) in jffs2_kill_sb().
Fix it by removing the buggy invocation of kfree() when getting invalid
mount options.
Fixes: 92abc475d8de ("jffs2: implement mount option parsing and compression overriding")
Cc: stable@kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
Updated documentation to explain base_frequency attribute.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Expose base_frequency to user space via cpufreq sysfs when HWP is in
use.
This HWP base frequency is read from the ACPI _CPC object if present,
or from the HWP Capabilities MSR otherwise.
On the majority of the HWP platforms the _CPC object will point to
the HWP Capabilities MSR using the "Functional Fixed Hardware"
address space type. The address space type also can simply be
ACPI_TYPE_INTEGER, however, in which case the platform firmware
can set its value at the initialization time based on the system
constraints.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Continuous Performance Control package may contain an optional
guaranteed performance field.
Add support to read guaranteed performance from _CPC.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux into pm-tools
Pull cpupower utility changes for 4.20 from Shuah Khan:
"This cpupower update consists of fixes for bugs and compile warnings
from Prarit Bhargava and Anders Roxell."
* tag 'linux-cpupower-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Fix coredump on VMWare
cpupower: Fix AMD Family 0x17 msr_pstate size
cpupower: remove stringop-truncation waring
|
|
If 'krealloc()' fails, 'pctl->functions' is set to NULL.
We should instead use a temp variable in order to be able to free the
previously allocated memeory, in case of OOM.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Some new Intel servers provide an interface so that the OS can ask the
BIOS to translate a system physical address to a memory address (socket,
memory controller, channel, rank, dimm, etc.). This is useful for EDAC
drivers that want to take the address of an error reported in a machine
check bank and let the user know which DIMM may need to be replaced.
Specification for this interface is available at:
https://cdrdv2.intel.com/v1/dl/getContent/603354
[ Based on earlier code by Qiuxu Zhuo <qiuxu.zhuo@intel.com>. ]
[ bp: Make the first pr_info() in adxl_init() pr_debug() so that it
doesn't pollute every dmesg. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
CC: Len Brown <lenb@kernel.org>
CC: linux-acpi@vger.kernel.org
CC: linux-edac@vger.kernel.org
Link: http://lkml.kernel.org/r/20181015202620.23610-1-tony.luck@intel.com
|
|
The reason of including <linux/bitops.h> here is just for BIT() and
GENMASK macros.
Since commit 8bd9cb51daac8 ("locking/atomics, asm-generic: Move some
macros from <linux/bitops.h> to a new <linux/bits.h> file"),
<linux/bits.h> is enough for such compile-time macros.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
