summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-03-22arm64: kaslr: Fix up the kernel image alignmentNeeraj Upadhyay
If kernel image extends across alignment boundary, existing code increases the KASLR offset by size of kernel image. The offset is masked after resizing. There are cases, where after masking, we may still have kernel image extending across boundary. This eventually results in only 2MB block getting mapped while creating the page tables. This results in data aborts while accessing unmapped regions during second relocation (with kaslr offset) in __primary_switch. To fix this problem, round up the kernel image size, by swapper block size, before adding it for correction. For example consider below case, where kernel image still crosses 1GB alignment boundary, after masking the offset, which is fixed by rounding up kernel image size. SWAPPER_TABLE_SHIFT = 30 Swapper using section maps with section size 2MB. CONFIG_PGTABLE_LEVELS = 3 VA_BITS = 39 _text : 0xffffff8008080000 _end : 0xffffff800aa1b000 offset : 0x1f35600000 mask = ((1UL << (VA_BITS - 2)) - 1) & ~(SZ_2M - 1) (_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7c (_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d offset after existing correction (before mask) = 0x1f37f9b000 (_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d (_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d offset (after mask) = 0x1f37e00000 (_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7c (_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d new offset w/ rounding up = 0x1f38000000 (_text + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d (_end + offset) >> SWAPPER_TABLE_SHIFT = 0x3fffffe7d Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR") Cc: <stable@vger.kernel.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by: Srinivas Ramana <sramana@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-03-22iommu: Disambiguate MSI region typesRobin Murphy
The introduction of reserved regions has left a couple of rough edges which we could do with sorting out sooner rather than later. Since we are not yet addressing the potential dynamic aspect of software-managed reservations and presenting them at arbitrary fixed addresses, it is incongruous that we end up displaying hardware vs. software-managed MSI regions to userspace differently, especially since ARM-based systems may actually require one or the other, or even potentially both at once, (which iommu-dma currently has no hope of dealing with at all). Let's resolve the former user-visible inconsistency ASAP before the ABI has been baked into a kernel release, in a way that also lays the groundwork for the latter shortcoming to be addressed by follow-up patches. For clarity, rename the software-managed type to IOMMU_RESV_SW_MSI, use IOMMU_RESV_MSI to describe the hardware type, and document everything a little bit. Since the x86 MSI remapping hardware falls squarely under this meaning of IOMMU_RESV_MSI, apply that type to their regions as well, so that we tell the same story to userspace across all platforms. Secondly, as the various region types require quite different handling, and it really makes little sense to ever try combining them, convert the bitfield-esque #defines to a plain enum in the process before anyone gets the wrong impression. Fixes: d30ddcaa7b02 ("iommu: Add a new type field in iommu_resv_region") Reviewed-by: Eric Auger <eric.auger@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: David Woodhouse <dwmw2@infradead.org> CC: kvm@vger.kernel.org Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22iommu/exynos: Workaround FLPD cache flush issues for SYSMMU v5Marek Szyprowski
For some unknown reasons, in some cases, FLPD cache invalidation doesn't work properly with SYSMMU v5 controllers found in Exynos5433 SoCs. This can be observed by a firmware crash during initialization phase of MFC video decoder available in the mentioned SoCs when IOMMU support is enabled. To workaround this issue perform a full TLB/FLPD invalidation in case of replacing any first level page descriptors in case of SYSMMU v5. Fixes: 740a01eee9ada ("iommu/exynos: Add support for v5 SYSMMU") CC: stable@vger.kernel.org # v4.10+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22iommu/exynos: Block SYSMMU while invalidating FLPD cacheMarek Szyprowski
Documentation specifies that SYSMMU should be in blocked state while performing TLB/FLPD cache invalidation, so add needed calls to sysmmu_block/unblock. Fixes: 66a7ed84b345d ("iommu/exynos: Apply workaround of caching fault page table entries") CC: stable@vger.kernel.org # v4.10+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22blk-mq: don't complete un-started request in timeout handlerMing Lei
When iterating busy requests in timeout handler, if the STARTED flag of one request isn't set, that means the request is being processed in block layer or driver, and isn't submitted to hardware yet. In current implementation of blk_mq_check_expired(), if the request queue becomes dying, un-started requests are handled as being completed/freed immediately. This way is wrong, and can cause rq corruption or double allocation[1][2], when doing I/O and removing&resetting NVMe device at the sametime. This patch fixes several issues reported by Yi Zhang. [1]. oops log 1 [ 581.789754] ------------[ cut here ]------------ [ 581.789758] kernel BUG at block/blk-mq.c:374! [ 581.789760] invalid opcode: 0000 [#1] SMP [ 581.789761] Modules linked in: vfat fat ipmi_ssif intel_rapl sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm nvme irqbypass crct10dif_pclmul nvme_core crc32_pclmul ghash_clmulni_intel intel_cstate ipmi_si mei_me ipmi_devintf intel_uncore sg ipmi_msghandler intel_rapl_perf iTCO_wdt mei iTCO_vendor_support mxm_wmi lpc_ich dcdbas shpchp pcspkr acpi_power_meter wmi nfsd auth_rpcgss nfs_acl lockd dm_multipath grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ahci libahci crc32c_intel tg3 libata megaraid_sas i2c_core ptp fjes pps_core dm_mirror dm_region_hash dm_log dm_mod [ 581.789796] CPU: 1 PID: 1617 Comm: kworker/1:1H Not tainted 4.10.0.bz1420297+ #4 [ 581.789797] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016 [ 581.789804] Workqueue: kblockd blk_mq_timeout_work [ 581.789806] task: ffff8804721c8000 task.stack: ffffc90006ee4000 [ 581.789809] RIP: 0010:blk_mq_end_request+0x58/0x70 [ 581.789810] RSP: 0018:ffffc90006ee7d50 EFLAGS: 00010202 [ 581.789811] RAX: 0000000000000001 RBX: ffff8802e4195340 RCX: ffff88028e2f4b88 [ 581.789812] RDX: 0000000000001000 RSI: 0000000000001000 RDI: 0000000000000000 [ 581.789813] RBP: ffffc90006ee7d60 R08: 0000000000000003 R09: ffff88028e2f4b00 [ 581.789814] R10: 0000000000001000 R11: 0000000000000001 R12: 00000000fffffffb [ 581.789815] R13: ffff88042abe5780 R14: 000000000000002d R15: ffff88046fbdff80 [ 581.789817] FS: 0000000000000000(0000) GS:ffff88047fc00000(0000) knlGS:0000000000000000 [ 581.789818] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 581.789819] CR2: 00007f64f403a008 CR3: 000000014d078000 CR4: 00000000001406e0 [ 581.789820] Call Trace: [ 581.789825] blk_mq_check_expired+0x76/0x80 [ 581.789828] bt_iter+0x45/0x50 [ 581.789830] blk_mq_queue_tag_busy_iter+0xdd/0x1f0 [ 581.789832] ? blk_mq_rq_timed_out+0x70/0x70 [ 581.789833] ? blk_mq_rq_timed_out+0x70/0x70 [ 581.789840] ? __switch_to+0x140/0x450 [ 581.789841] blk_mq_timeout_work+0x88/0x170 [ 581.789845] process_one_work+0x165/0x410 [ 581.789847] worker_thread+0x137/0x4c0 [ 581.789851] kthread+0x101/0x140 [ 581.789853] ? rescuer_thread+0x3b0/0x3b0 [ 581.789855] ? kthread_park+0x90/0x90 [ 581.789860] ret_from_fork+0x2c/0x40 [ 581.789861] Code: 48 85 c0 74 0d 44 89 e6 48 89 df ff d0 5b 41 5c 5d c3 48 8b bb 70 01 00 00 48 85 ff 75 0f 48 89 df e8 7d f0 ff ff 5b 41 5c 5d c3 <0f> 0b e8 71 f0 ff ff 90 eb e9 0f 1f 40 00 66 2e 0f 1f 84 00 00 [ 581.789882] RIP: blk_mq_end_request+0x58/0x70 RSP: ffffc90006ee7d50 [ 581.789889] ---[ end trace bcaf03d9a14a0a70 ]--- [2]. oops log2 [ 6984.857362] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 6984.857372] IP: nvme_queue_rq+0x6e6/0x8cd [nvme] [ 6984.857373] PGD 0 [ 6984.857374] [ 6984.857376] Oops: 0000 [#1] SMP [ 6984.857379] Modules linked in: ipmi_ssif vfat fat intel_rapl sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_si iTCO_wdt iTCO_vendor_support mxm_wmi ipmi_devintf intel_cstate sg dcdbas intel_uncore mei_me intel_rapl_perf mei pcspkr lpc_ich ipmi_msghandler shpchp acpi_power_meter wmi nfsd auth_rpcgss dm_multipath nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect crc32c_intel sysimgblt fb_sys_fops ttm nvme drm nvme_core ahci libahci i2c_core tg3 libata ptp megaraid_sas pps_core fjes dm_mirror dm_region_hash dm_log dm_mod [ 6984.857416] CPU: 7 PID: 1635 Comm: kworker/7:1H Not tainted 4.10.0-2.el7.bz1420297.x86_64 #1 [ 6984.857417] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016 [ 6984.857427] Workqueue: kblockd blk_mq_run_work_fn [ 6984.857429] task: ffff880476e3da00 task.stack: ffffc90002e90000 [ 6984.857432] RIP: 0010:nvme_queue_rq+0x6e6/0x8cd [nvme] [ 6984.857433] RSP: 0018:ffffc90002e93c50 EFLAGS: 00010246 [ 6984.857434] RAX: 0000000000000000 RBX: ffff880275646600 RCX: 0000000000001000 [ 6984.857435] RDX: 0000000000000fff RSI: 00000002fba2a000 RDI: ffff8804734e6950 [ 6984.857436] RBP: ffffc90002e93d30 R08: 0000000000002000 R09: 0000000000001000 [ 6984.857437] R10: 0000000000001000 R11: 0000000000000000 R12: ffff8804741d8000 [ 6984.857438] R13: 0000000000000040 R14: ffff880475649f80 R15: ffff8804734e6780 [ 6984.857439] FS: 0000000000000000(0000) GS:ffff88047fcc0000(0000) knlGS:0000000000000000 [ 6984.857440] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6984.857442] CR2: 0000000000000010 CR3: 0000000001c09000 CR4: 00000000001406e0 [ 6984.857443] Call Trace: [ 6984.857451] ? mempool_free+0x2b/0x80 [ 6984.857455] ? bio_free+0x4e/0x60 [ 6984.857459] blk_mq_dispatch_rq_list+0xf5/0x230 [ 6984.857462] blk_mq_process_rq_list+0x133/0x170 [ 6984.857465] __blk_mq_run_hw_queue+0x8c/0xa0 [ 6984.857467] blk_mq_run_work_fn+0x12/0x20 [ 6984.857473] process_one_work+0x165/0x410 [ 6984.857475] worker_thread+0x137/0x4c0 [ 6984.857478] kthread+0x101/0x140 [ 6984.857480] ? rescuer_thread+0x3b0/0x3b0 [ 6984.857481] ? kthread_park+0x90/0x90 [ 6984.857489] ret_from_fork+0x2c/0x40 [ 6984.857490] Code: 8b bd 70 ff ff ff 89 95 50 ff ff ff 89 8d 58 ff ff ff 44 89 95 60 ff ff ff e8 b7 dd 12 e1 8b 95 50 ff ff ff 48 89 85 68 ff ff ff <4c> 8b 48 10 44 8b 58 18 8b 8d 58 ff ff ff 44 8b 95 60 ff ff ff [ 6984.857511] RIP: nvme_queue_rq+0x6e6/0x8cd [nvme] RSP: ffffc90002e93c50 [ 6984.857512] CR2: 0000000000000010 [ 6984.895359] ---[ end trace 2d7ceb528432bf83 ]--- Cc: stable@vger.kernel.org Reported-by: Yi Zhang <yizhan@redhat.com> Tested-by: Yi Zhang <yizhan@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-22[media] exynos-gsc: Do not swap cb/cr for semi planar formatsThibault Saunier
In the case of semi planar formats cb and cr are in the same plane in memory, meaning that will be set to 'cb' whatever the format is, and whatever the (packed) order of those components are. Suggested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Thibault Saunier <thibault.saunier@osg.samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22[media] bdisp: Clean up file handle in open() error pathShailendra Verma
The File handle is not yet added in the vdev list.So no need to call v4l2_fh_del(&ctx->fh)if it fails to create control. Signed-off-by: Shailendra Verma <shailendra.v@samsung.com> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22[media] coda/imx-vdoa: platform_driver should not be constArnd Bergmann
The device driver platform is actually written to during registration, for setting the owner field, so platform_driver_register() does not take a const pointer: drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_init': drivers/media/platform/coda/imx-vdoa.c:333:213: error: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] module_platform_driver(vdoa_driver); In file included from drivers/media/platform/coda/imx-vdoa.c:22:0: include/linux/platform_device.h:199:12: note: expected 'struct platform_driver *' but argument is of type 'const struct platform_driver *' extern int __platform_driver_register(struct platform_driver *, ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_exit': drivers/media/platform/coda/imx-vdoa.c:333:626: error: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] Remove the modifier again. Fixes: d2fe28feaebb ("[media] coda/imx-vdoa: constify structs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22netfilter: nfnl_cthelper: Fix memory leakJeffy Chen
We have memory leaks of nf_conntrack_helper & expect_policy. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-03-22netfilter: nfnl_cthelper: fix runtime expectation policy updatesPablo Neira Ayuso
We only allow runtime updates of expectation policies for timeout and maximum number of expectations, otherwise reject the update. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Liping Zhang <zlpnobody@gmail.com>
2017-03-22Merge tag 'extcon-fixes-for-4.11-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-linus Chanwoo writes: Update extcon for v4.11-rc3 This patch fixes issues for Intel INT3496 ACPI device as following: - Propagate error code of gpiod_to_irq(). - Set the ID pin as the input direction if firmware has the bug - Rename the gpio name for bining according to the documentation. - Add gpio acpi mapping table and the dependency on X86. - Use the devm_gpiod_get() instead of gpiod_get_index because of acpi mapping table.
2017-03-22Merge tag 'iio-fixes-for-4.11c' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Thirds set of IIO fixes for the 4.11 cycle. * core - iio sw-device - ensure configfs is enabled both when building as module and built in. * ak8974 - drop incorrect __exit markup on remove. * hid-sensor-trigger - code reorganise to avoid losing settings if a power cycle occurs during S3. * lsm6dsx - fix incorrect overwrite of parts of FIFO_CTRL2 register during watermark configuration. * ti-am335x - fix a hard to hit bug when reenabling from a fifo overrun by waiting for current cycle to finish.
2017-03-22iommu/vt-d: Fix NULL pointer dereference in device_to_iommuKoos Vriezen
The function device_to_iommu() in the Intel VT-d driver lacks a NULL-ptr check, resulting in this oops at boot on some platforms: BUG: unable to handle kernel NULL pointer dereference at 00000000000007ab IP: [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0 PGD 0 [...] Call Trace: ? find_or_alloc_domain.constprop.29+0x1a/0x300 ? dw_dma_probe+0x561/0x580 [dw_dmac_core] ? __get_valid_domain_for_dev+0x39/0x120 ? __intel_map_single+0x138/0x180 ? intel_alloc_coherent+0xb6/0x120 ? sst_hsw_dsp_init+0x173/0x420 [snd_soc_sst_haswell_pcm] ? mutex_lock+0x9/0x30 ? kernfs_add_one+0xdb/0x130 ? devres_add+0x19/0x60 ? hsw_pcm_dev_probe+0x46/0xd0 [snd_soc_sst_haswell_pcm] ? platform_drv_probe+0x30/0x90 ? driver_probe_device+0x1ed/0x2b0 ? __driver_attach+0x8f/0xa0 ? driver_probe_device+0x2b0/0x2b0 ? bus_for_each_dev+0x55/0x90 ? bus_add_driver+0x110/0x210 ? 0xffffffffa11ea000 ? driver_register+0x52/0xc0 ? 0xffffffffa11ea000 ? do_one_initcall+0x32/0x130 ? free_vmap_area_noflush+0x37/0x70 ? kmem_cache_alloc+0x88/0xd0 ? do_init_module+0x51/0x1c4 ? load_module+0x1ee9/0x2430 ? show_taint+0x20/0x20 ? kernel_read_file+0xfd/0x190 ? SyS_finit_module+0xa3/0xb0 ? do_syscall_64+0x4a/0xb0 ? entry_SYSCALL64_slow_path+0x25/0x25 Code: 78 ff ff ff 4d 85 c0 74 ee 49 8b 5a 10 0f b6 9b e0 00 00 00 41 38 98 e0 00 00 00 77 da 0f b6 eb 49 39 a8 88 00 00 00 72 ce eb 8f <41> f6 82 ab 07 00 00 04 0f 85 76 ff ff ff 0f b6 4d 08 88 0e 49 RIP [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0 RSP <ffffc90001457a78> CR2: 00000000000007ab ---[ end trace 16f974b6d58d0aad ]--- Add the missing pointer check. Fixes: 1c387188c60f53b338c20eee32db055dfe022a9b ("iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions") Signed-off-by: Koos Vriezen <koos.vriezen@gmail.com> Cc: stable@vger.kernel.org # 4.8.15+ Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22MIPS: IRQ Stack: Unwind IRQ stack onto task stackMatt Redfearn
When the separate IRQ stack was introduced, stack unwinding only proceeded as far as the top of the IRQ stack, leading to kernel backtraces being less useful, lacking the trace of what was interrupted. Fix this by providing a means for the kernel to unwind the IRQ stack onto the interrupted task stack. The processor state is saved to the kernel task stack on interrupt. The IRQ_STACK_START macro reserves an unsigned long at the top of the IRQ stack where the interrupted task stack pointer can be saved. After the active stack is switched to the IRQ stack, save the interrupted tasks stack pointer to the reserved location. Fix the stack unwinding code to look for the frame being the top of the IRQ stack and if so get the next frame from the saved location. The existing test does not work with the separate stack since the ra is no longer pointed at ret_from_{irq,exception}. The test to stop unwinding the stack 32 bytes from the top of a stack must be modified to allow unwinding to continue up to the location of the saved task stack pointer when on the IRQ stack. The low / high marks of the stack are set depending on whether the sp is on an irq stack or not. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15788/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-03-22extcon: int3496: Set the id pin to direction-input if necessaryHans de Goede
With the new more strict ACPI gpio code the dsdt's IoRestriction flags are honored on gpiod_get, but in some dsdt's it is wrong, so explicitly call gpiod_direction_input on the id gpio if necessary. This fixes the following errors when the int3496 code is used together with the new more strict ACPI gpio code: [ 2382.484415] gpio gpiochip1: (INT33FF:01): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 2382.484425] gpio gpiochip1: (INT33FF:01): unable to lock HW IRQ 3 for IRQ [ 2382.484429] genirq: Failed to request resources for INT3496:00 (irq 174) on irqchip chv-gpio [ 2382.484518] intel-int3496 INT3496:00: can't request IRQ for USB ID GPIO: -22 [ 2382.500359] intel-int3496: probe of INT3496:00 failed with error -22 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22extcon: int3496: Use gpiod_get instead of gpiod_get_indexHans de Goede
Now that we've an acpi mapping table we should be using gpiod_get instead of gpiod_get_index. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22extcon: int3496: Add dependency on X86 as it's Intel specificPeter Robinson
Add dependency on X86 so it doesn't show up on other arches and add a option for compile test so it still gets build coverage. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22extcon: int3496: Add GPIO ACPI mapping tableAndy Shevchenko
In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22extcon: int3496: Rename GPIO pins in accordance with bindingAndy Shevchenko
Update GPIO pin names in extcon-intel-int3496.c driver to follow the existing extcon binding. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-03-22usb: gadget: f_hid: fix: Don't access hidg->req without spinlock heldKrzysztof Opasiak
hidg->req should be accessed only with write_spinlock held as it is set to NULL when we get disabled by host. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-22usb: gadget: udc: remove pointer dereference after freeGustavo A. R. Silva
Remove pointer dereference after free. Addresses-Coverity-ID: 1091173 Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-22usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeedRoger Quadros
As per USB3.0 Specification "Table 9-20. Standard Endpoint Descriptor", for interrupt and isochronous endpoints, wMaxPacketSize must be set to 1024 if the endpoint defines bMaxBurst to be greater than zero. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-22usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerIntervalRoger Quadros
The streaming_maxburst module parameter is 0 offset (0..15) so we must add 1 while using it for wBytesPerInterval calculation for the SuperSpeed companion descriptor. Without this host uvcvideo driver will always see the wrong wBytesPerInterval for SuperSpeed uvc gadget and may not find a suitable video interface endpoint. e.g. for streaming_maxburst = 0 case it will always fail as wBytePerInterval was evaluating to 0. Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-22usb: gadget: acm: fix endianness in notificationsOliver Neukum
The gadget code exports the bitfield for serial status changes over the wire in its internal endianness. The fix is to convert to little endian before sending it over the wire. Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: 家瑋 <momo1208@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-22usb: dwc3: gadget: delay unmap of bounced requestsJanusz Dziedzic
In the case of bounced ep0 requests, we must delay DMA operation until after ->complete() otherwise we might overwrite contents of req->buf. This caused problems with RNDIS gadget. Signed-off-by: Janusz Dziedzic <januszx.dziedzic@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-03-22x86/mce: Fix copy/paste error in exception table entriesTony Luck
Back in commit: 92b0729c34cab ("x86/mm, x86/mce: Add memcpy_mcsafe()") ... I made a copy/paste error setting up the exception table entries and ended up with two for label .L_cache_w3 and none for .L_cache_w2. This means that if we take a machine check on: .L_cache_w2: movq 2*8(%rsi), %r10 then we don't have an exception table entry for this instruction and we can't recover. Fix: s/3/2/ Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 92b0729c34cab ("x86/mm, x86/mce: Add memcpy_mcsafe()") Link: http://lkml.kernel.org/r/1490046030-25862-1-git-send-email-tony.luck@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-22s390/pkey: Fix wrong handling of secure key with old MKVPHarald Freudenberger
When a secure key with an old Master Key Verification Pattern was given to the pkey_findcard function, there was no responsible card found because only the current MKVP of each card was compared. With this fix also the old MKVP values are considered and so a matching card able to handle the key is reported back to the caller. Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22s390/smp: fix ipl from cpu with non-zero addressHeiko Carstens
Commit af51160ebd3c ("s390/smp: initialize cpu_present_mask in setup_arch") initializes the cpu_present_mask much earlier than before. However the cpu detection code relies on the fact that iff logical cpu 0 is marked present then also the corresponding physical cpu address within the pcpu_devices array slot is valid. Since commit 44fd22992cb7 ("[PATCH] Register the boot-cpu in the cpu maps earlier") this assumption is not true anymore. The patch marks logical cpu 0 as present in common code without that architecture code had a chance to setup the logical to physical map. With that change the cpu detection code assumes that the physical cpu address of cpu 0 is also 0, which is not necessarily true. Subsequently the physical cpu address of the ipl cpu will be mapped to a different logical cpu. If that cpu is brought online later the ipl cpu will send itself an initial cpu reset sigp signal. This in turn completely resets the ipl cpu and the system stops working. A dump of such a system looks like a "store status" has been forgotten. But actually the kernel itself removed all traces which would allow to easily tell what went wrong. To fix this initialize the logical to physical cpu address already in smp_setup_processor_id(). In addition remove the initialization of the cpu_present_mask and cpu_online_mask for cpu 0, since that has already been done. Also add a sanity check, just in case common code will be changed again... The problem can be easily reproduced within a z/VM guest: > chcpu -d 0 > vmcp ipl Fixes: af51160ebd3c ("s390/smp: initialize cpu_present_mask in setup_arch") Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22s390/decompressor: fix initrd corruption caused by bss clearMarcelo Henrique Cerri
Reorder the operations in decompress_kernel() to ensure initrd is moved to a safe location before the bss section is zeroed. During decompression bss can overlap with the initrd and this can corrupt the initrd contents depending on the size of the compressed kernel (which affects where the initrd is placed by the bootloader) and the size of the bss section of the decompressor. Also use the correct initrd size when checking for overlaps with parmblock. Fixes: 06c0dd72aea3 ([S390] fix boot failures with compressed kernels) Cc: stable@vger.kernel.org Reviewed-by: Joy Latten <joy.latten@canonical.com> Reviewed-by: Vineetha HariPai <vineetha.hari.pai@canonical.com> Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-22hwmon: Add missing HWMON_T_ALARMPeter Huewe
Unfortunately the HWMON_T_ALARM define was missing, although the associated entry was present in hwmon_temp_attributes. This is needed to convert drivers to the new interface which use channel based alarms. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-22hwmon: (it87) Avoid registering the same chip on both SIO addressesGuenter Roeck
IT8705F is known to respond on both SIO addresses. Registering it twice may result in system lockups. Reported-by: Russell King <linux@armlinux.org.uk> Fixes: e84bd9535e2b ("hwmon: (it87) Add support for second Super-IO chip") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-22hwmon: (max31790) Set correct PWM valueAlex Hemme
Traced fans not spinning to incorrect PWM value being written. The passed in value was written instead of the calulated value. Fixes: 54187ff9d766 ("hwmon: (max31790) Convert to use new hwmon registration API") Signed-off-by: Alex Hemme <ahemme@cisco.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-22x86/platform/uv: Fix calculation of Global Physical AddressMike Travis
The calculation of the global physical address (GPA) on UV4 is incorrect. The gnode_extra/upper global offset should only be applied for fixed address space systems (UV1..3). Tested-by: John Estabrook <john.estabrook@hpe.com> Signed-off-by: Mike Travis <mike.travis@hpe.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: John Estabrook <estabrook@sgi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <russ.anderson@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170321231646.667689538@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-22drm/i915/gvt: Use force single submit flag to distinguish gvt request from ↵Changbin Du
i915 request In my previous Commit ab9da627906a ("drm/i915: make context status notifier head be per engine") rely on scheduler->current_workload[x] to distinguish gvt spacial request from i915 request. But this is not always true since no synchronization between workload_thread and lrc irq handler. lrc irq handler workload_thread ---- ---- pick i915 requests; intel_vgpu_submit_execlist(); current_workload[x] = xxx; shadow_context_status_change(); Then current_workload[x] is not null but current request is of i915 self. So instead we check ctx flag CONTEXT_FORCE_SINGLE_SUBMISSION. Only gvt request set this flag and always set. v2: Reverse the order of multi-condition 'if' statement. Fixes: ab9da6279 ("drm/i915: make context status notifier head be per engine") Signed-off-by: Changbin Du <changbin.du@intel.com> Reviewed-by: Yulei Zhang <yulei.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-03-21net: qmi_wwan: Add USB IDs for MDM6600 modem on Motorola Droid 4Tony Lindgren
This gets qmicli working with the MDM6600 modem. Cc: Bjørn Mork <bjorn@mork.no> Reviewed-by: Sebastian Reichel <sre@kernel.org> Tested-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21selftests/bpf: fix broken build, take 2Zi Shen Lim
Merge of 'linux-kselftest-4.11-rc1': 1. Partially removed use of 'test_objs' target, breaking force rebuild of BPFOBJ, introduced in commit d498f8719a09 ("bpf: Rebuild bpf.o for any dependency update"). Update target so dependency on BPFOBJ is restored. 2. Introduced commit 2047f1d8ba28 ("selftests: Fix the .c linking rule") which fixes order of LDLIBS. Commit d02d8986a768 ("bpf: Always test unprivileged programs") added libcap dependency into CFLAGS. Use LDLIBS instead to fix linking of test_verifier. 3. Introduced commit d83c3ba0b926 ("selftests: Fix selftests build to just build, not run tests"). Reordering the Makefile allows us to remove the 'all' target. Tested both: selftests/bpf$ make and selftests$ make TARGETS=bpf on Ubuntu 16.04.2. Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21tcp: mark skbs with SCM_TIMESTAMPING_OPT_STATSSoheil Hassas Yeganeh
SOF_TIMESTAMPING_OPT_STATS can be enabled and disabled while packets are collected on the error queue. So, checking SOF_TIMESTAMPING_OPT_STATS in sk->sk_tsflags is not enough to safely assume that the skb contains OPT_STATS data. Add a bit in sock_exterr_skb to indicate whether the skb contains opt_stats data. Fixes: 1c885808e456 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING") Reported-by: JongHwan Kim <zzoru007@gmail.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21tcp: fix SCM_TIMESTAMPING_OPT_STATS for normal skbsSoheil Hassas Yeganeh
__sock_recv_timestamp can be called for both normal skbs (for receive timestamps) and for skbs on the error queue (for transmit timestamps). Commit 1c885808e456 (tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING) assumes any skb passed to __sock_recv_timestamp are from the error queue, containing OPT_STATS in the content of the skb. This results in accessing invalid memory or generating junk data. To fix this, set skb->pkt_type to PACKET_OUTGOING for packets on the error queue. This is safe because on the receive path on local sockets skb->pkt_type is never set to PACKET_OUTGOING. With that, copy OPT_STATS from a packet, only if its pkt_type is PACKET_OUTGOING. Fixes: 1c885808e456 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING") Reported-by: JongHwan Kim <zzoru007@gmail.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22cpufreq: Restore policy min/max limits on CPU onlineViresh Kumar
On CPU online the cpufreq core restores the previous governor (or the previous "policy" setting for ->setpolicy drivers), but it does not restore the min/max limits at the same time, which is confusing, inconsistent and real pain for users who set the limits and then suspend/resume the system (using full suspend), in which case the limits are reset on all CPUs except for the boot one. Fix this by making cpufreq_online() restore the limits when an inactive policy is brought online. The commit log and patch are inspired from Rafael's earlier work. Reported-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.3+ <stable@vger.kernel.org> # 4.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-03-21sctp: out_qlen should be updated when pruning unsent queueXin Long
This patch is to fix the issue that sctp_prsctp_prune_sent forgot to update q->out_qlen when removing a chunk from unsent queue. Fixes: 8dbdf1f5b09c ("sctp: implement prsctp PRIO policy") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21sctp: define dst_pending_confirm as a bit in sctp_transportXin Long
As tp->dst_pending_confirm's value can only be set 0 or 1, this patch is to change to define it as a bit instead of __u32. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21sctp: remove temporary variable confirm from sctp_packet_transmitXin Long
Commit c86a773c7802 ("sctp: add dst_pending_confirm flag") introduced a temporary variable "confirm" in sctp_packet_transmit. But it broke the rule that longer lines should be above shorter ones. Besides, this variable is not necessary, so this patch is to just remove it and use tp->dst_pending_confirm directly. Fixes: c86a773c7802 ("sctp: add dst_pending_confirm flag") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: vrf: Reset rt6i_idev in local dst after putDavid Ahern
The VRF driver takes a reference to the inet6_dev on the VRF device for its rt6_local dst when handling local traffic through the VRF device as a loopback. When the device is deleted the driver does a put on the idev but does not reset rt6i_idev in the rt6_info struct. When the dst is destroyed, dst_destroy calls ip6_dst_destroy which does a second put for what is essentially the same reference causing it to be prematurely freed. Reset rt6i_idev after the put in the vrf driver. Fixes: b4869aa2f881e ("net: vrf: ipv6 support for local traffic to local addresses") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21bna: integer overflow bug in debugfsDan Carpenter
We could allocate less memory than intended because we do: bnad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. Fixes: 7afc5dbde091 ("bna: Add debugfs interface.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Rasesh Mody <rasesh.mody@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21Merge tag 'at91-ab-4.11-fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes Fixes for 4.11: - Fix USB host for sama5d2 - Fix cpuidle on sama5 * tag 'at91-ab-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91: pm: cpu_idle: switch DDR to power-down mode Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node" Signed-off-by: Olof Johansson <olof@lixom.net>
2017-03-21Merge tag 'reset-fixes-for-4.11' of git://git.pengutronix.de/git/pza/linux ↵Olof Johansson
into fixes Reset controller fixes for v4.11 Fix optional reset_control_get_stubs to return NULL and remove warnings from reset_control_* stubs. This fixes commit bb475230b8e5 ("reset: make optional functions really optional"), which was merged in reset-for-4.11, and would cause consumer drivers depending on the new behaviour of optional resets to fail probing if RESET_CONTROLLER Kconfig option is disabled. * tag 'reset-fixes-for-4.11' of git://git.pengutronix.de/git/pza/linux: reset: fix optional reset_control_get stubs to return NULL Signed-off-by: Olof Johansson <olof@lixom.net>
2017-03-21Merge tag 'sunxi-fixes-for-4.11' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.11 A bunch of device tree fixes for various boards / SoCs. * tag 'sunxi-fixes-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: sun8i: a23/a33: drop bl_en_pin GPIO pinmux in reference design DTSI ARM: dts: sun7i: lamobo-r1: Fix CPU port RGMII settings ARM: sun8i: Fix the mali clock rate Signed-off-by: Olof Johansson <olof@lixom.net>
2017-03-21Merge tag 'imx-fixes-4.11' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.11: - A fix to reboot hang seen on imx6sx-udoo-neo board, by removing arm-supply and soc-supply and using LDO enabled mode. * tag 'imx-fixes-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6sx-udoo-neo: Fix reboot hang Signed-off-by: Olof Johansson <olof@lixom.net>
2017-03-21qmi_wwan: add Dell DW5811eBjørn Mork
This is a Dell branded Sierra Wireless EM7455. It is operating in MBIM mode by default, but can be configured to provide two QMI/RMNET functions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21sch_dsmark: fix invalid skb_cow() usageEric Dumazet
skb_cow(skb, sizeof(ip header)) is not very helpful in this context. First we need to use pskb_may_pull() to make sure the ip header is in skb linear part, then use skb_try_make_writable() to address clones issues. Fixes: 4c30719f4f55 ("[PKT_SCHED] dsmark: handle cloned and non-linear skb's") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 23:28:49 +0000