summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-19mt76: fix the wiphy's available antennas to the correct valueBo Jiao
the wiphy's available antennas may be incorrect When ext phy's antenna_mask is different from main phy Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: do not pass the received frame with decryption errorXing Song
MAC80211 doesn't care any decryption error in 802.3 path, so received frame will be dropped if HW tell us that the cipher configuration is not matched as well as the header has been translated to 802.3. This case only appears when IEEE80211_FCTL_PROTECTED is 0 and cipher suit is not none in the corresponding HW entry. The received frame is only reported to monitor interface if HW decryption block tell us there is ICV error or CCMP/BIP/WPI MIC error. Note in this case the reported frame is decrypted 802.11 frame and the payload may be malformed due to mismatched key. Signed-off-by: Xing Song <xing.song@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: connac: remove PHY_MODE_AX_6G configuration in mt76_connac_get_phy_modeLorenzo Bianconi
Get rid of PHY_MODE_AX_6G configuration in mt76_connac_get_phy_mode routine since mode is an u8 and PHY_MODE_AX_6G is set in phymode_ext field in mt76_connac_bss_basic_tlv. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7615: remove dead code in get_omac_idxLorenzo Bianconi
Remove always false if condition in get_omac_idx for sta type Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: connac: fix a theoretical NULL pointer dereference in ↵Lorenzo Bianconi
mt76_connac_get_phy_mode Even if it is not a real bug since mt76_connac_get_phy_mode runs just for mt7921 where only STA is supported, fix a theoretical NULL pointer dereference if new added modes do not support HE Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921: fix possible NULL pointer dereference in mt7921_mac_write_txwiLorenzo Bianconi
Fix a possible NULL pointer deference issue in mt7921_mac_write_txwi routine if vif is NULL. Fixes: 33920b2bf0483 ("mt76: add support for setting mcast rate") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: fix possible OOB issue in mt76_calculate_default_rateLorenzo Bianconi
Cap max offset value to ARRAY_SIZE(mt76_rates) - 1 in mt76_calculate_default_rate routine in order to avoid possible Out Of Bound accesses. Fixes: 33920b2bf0483 ("mt76: add support for setting mcast rate") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: mt7921: introduce 160 MHz channel bandwidth supportDeren Wu
Introduce the basic configuration for BW160 capability in 7922 Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19mt76: debugfs: fix queue reporting for mt76-usbLorenzo Bianconi
Fix number of rx-queued frames reported by mt76_usb driver. Reported-by: kernel test robot <lkp@intel.com> Fixes: 2d8be76c1674 ("mt76: debugfs: improve queue node readability") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19Merge branch 'tc-action-offload'David S. Miller
Simon Horman says: ==================== allow user to offload tc action to net device Baowen Zheng says: Allow use of flow_indr_dev_register/flow_indr_dev_setup_offload to offload tc actions independent of flows. The motivation for this work is to prepare for using TC police action instances to provide hardware offload of OVS metering feature - which calls for policers that may be used by multiple flows and whose lifecycle is independent of any flows that use them. This patch includes basic changes to offload drivers to return EOPNOTSUPP if this feature is used - it is not yet supported by any driver. Tc cli command to offload and quote an action: # tc qdisc del dev $DEV ingress && sleep 1 || true # tc actions delete action police index 200 || true # tc qdisc add dev $DEV ingress # tc qdisc show dev $DEV ingress # tc actions add action police rate 100mbit burst 10000k index 200 skip_sw # tc -s -d actions list action police total acts 1 action order 0: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify overhead 0b linklayer ethernet ref 1 bind 0 installed 142 sec used 0 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 skip_sw in_hw in_hw_count 1 used_hw_stats delayed # tc filter add dev $DEV protocol ip parent ffff: \ flower skip_sw ip_proto tcp action police index 200 # tc -s -d filter show dev $DEV protocol ip parent ffff: filter pref 49152 flower chain 0 filter pref 49152 flower chain 0 handle 0x1 eth_type ipv4 ip_proto tcp skip_sw in_hw in_hw_count 1 action order 1: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify overhead 0b linklayer ethernet ref 2 bind 1 installed 300 sec used 0 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 skip_sw in_hw in_hw_count 1 used_hw_stats delayed # tc filter add dev $DEV protocol ipv6 parent ffff: \ flower skip_sw ip_proto tcp action police index 200 # tc -s -d filter show dev $DEV protocol ipv6 parent ffff: filter pref 49151 flower chain 0 filter pref 49151 flower chain 0 handle 0x1 eth_type ipv6 ip_proto tcp skip_sw in_hw in_hw_count 1 action order 1: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify overhead 0b linklayer ethernet ref 3 bind 2 installed 761 sec used 0 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 skip_sw in_hw in_hw_count 1 used_hw_stats delayed # tc -s -d actions list action police total acts 1 action order 0: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify overhead 0b linklayer ethernet ref 3 bind 2 installed 917 sec used 0 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 skip_sw in_hw in_hw_count 1 used_hw_stats delayed Changes between v7 and v8: * Rename enum offload_act_command as enum flow_offload_act_command * Add a single patch to rename exts stats update function for readability. * Fix the kernel test robot issue reported by Oliver Sang. Changes between v6 and v7: * Add a single patch to rename offload functions with offload for readability. * Post 166b6a46b78b ("flow_offload: return EOPNOTSUPP for the unsupported mpls action type") as a bug fix to netdev. * Rename enum flow_act_command as enum flow_offload_act_command * Rename the new added action offload setup ops with offload instead of flow * Rename the new added action offload function with offload instead of flow. * Add more selftest cases for validate filter and actions. Changes between v5 and v6: * Fix issue reported by Dan Carpenter found using Smatch. Changes beteeen v4 and v5: * Made changes of code style according to the public review comments. * Add a fix for unsupported mpls action type in flow action setup stage. * Add ops to tc_action_ops for flow action setup to facilitate adding a standalone action module. * Add notification process when deleting action in reoffload process. Changes between v3 and v4: * Made changes according to the public review comments. * Validate flags inside tcf_action_init() instead of creating new tcf_exts_validate_actions() function. * Exactly match when validating flags of actions and filters. * Add index to flow_action_entry for driver to identify actions. Changes between v2 and v3: * Made changes according to the review comments. * Delete in_hw and not_in_hw flag and user can judge if the action is offloaded to any hardware by in_hw_count. * Split the main patch of the action offload to three single patch to facilitate code review. Changes between v1 and v2: * Add the skip_hw/skip_sw for user to specify if the action should be in hardware or software. * Fix issue of sleeping function called from invalid context. * Change the action offload/delete from batch to one by one. * Add some parameters to the netlink message for user space to look up the offload status of the actions. * Add reoffload process to update action hw_count when driver is inserted or removed. Changes between v1 and RFC: * Fix robot test failure. * Change actions offload process in action add function rather than action init. * Change actions offload delete process after tcf_del_notify to keep undeleted actions. * Add process to update actions stats from hardware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19selftests: tc-testing: add action offload selftest for action and filterBaowen Zheng
Add selftest cases in action police with skip_hw. Add selftest case to validate flags of filter and action. These tests depend on corresponding iproute2 command support. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: validate flags of filter and actionsBaowen Zheng
Add process to validate flags of filter and actions when adding a tc filter. We need to prevent adding filter with flags conflicts with its actions. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: add reoffload process to update hw_countBaowen Zheng
Add reoffload process to update hw_count when driver is inserted or removed. We will delete the action if it is with skip_sw flag and not offloaded to any hardware in reoffload process. When reoffloading actions, we still offload the actions that are added independent of filters. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19net: sched: save full flags for tc actionBaowen Zheng
Save full action flags and return user flags when return flags to user space. Save full action flags to distinguish if the action is created independent from classifier. We made this change mainly for further patch to reoffload tc actions. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: add process to update action stats from hardwareBaowen Zheng
When collecting stats for actions update them using both hardware and software counters. Stats update process should not run in context of preempt_disable. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: rename exts stats update functions with hwBaowen Zheng
Rename exts stats update functions with hw for readability. We make this change also to update stats from hw for an action when it is offloaded to hw as a single action. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: add skip_hw and skip_sw to control if offload the actionBaowen Zheng
We add skip_hw and skip_sw for user to control if offload the action to hardware. We also add in_hw_count for user to indicate if the action is offloaded to any hardware. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: allow user to offload tc action to net deviceBaowen Zheng
Use flow_indr_dev_register/flow_indr_dev_setup_offload to offload tc action. We need to call tc_cleanup_flow_action to clean up tc action entry since in tc_setup_action, some actions may hold dev refcnt, especially the mirror action. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: add ops to tc_action_ops for flow action setupBaowen Zheng
Add a new ops to tc_action_ops for flow action setup. Refactor function tc_setup_flow_action to use this new ops. We make this change to facilitate to add standalone action module. We will also use this ops to offload action independent of filter in following patch. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: rename offload functions with offload instead of flowBaowen Zheng
To improves readability, we rename offload functions with offload instead of flow. The term flow is related to exact matches, so we rename these functions with offload. We make this change to facilitate single action offload functions naming. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: add index to flow_action_entry structureBaowen Zheng
Add index to flow_action_entry structure and delete index from police and gate child structure. We make this change to offload tc action for driver to identify a tc action. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: reject to offload tc actions in offload driversBaowen Zheng
A follow-up patch will allow users to offload tc actions independent of classifier in the software datapath. In preparation for this, teach all drivers that support offload of the flow tables to reject such configuration as currently none of them support it. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: fill flags to action structureBaowen Zheng
Fill flags to action structure to allow user control if the action should be offloaded to hardware or not. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19gpio: dln2: Fix interrupts when replugging the deviceNoralf Trønnes
When replugging the device the following message shows up: gpio gpiochip2: (dln2): detected irqchip that is shared with multiple gpiochips: please fix the driver. This also has the effect that interrupts won't work. The same problem would also show up if multiple devices where plugged in. Fix this by allocating the irq_chip data structure per instance like other drivers do. I don't know when this problem appeared, but it is present in 5.10. Cc: <stable@vger.kernel.org> # 5.10+ Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-12-18bpf: Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument supportKumar Kartikeya Dwivedi
Allow passing PTR_TO_CTX, if the kfunc expects a matching struct type, and punt to PTR_TO_MEM block if reg->type does not fall in one of PTR_TO_BTF_ID or PTR_TO_SOCK* types. This will be used by future commits to get access to XDP and TC PTR_TO_CTX, and pass various data (flags, l4proto, netns_id, etc.) encoded in opts struct passed as pointer to kfunc. For PTR_TO_MEM support, arguments are currently limited to pointer to scalar, or pointer to struct composed of scalars. This is done so that unsafe scenarios (like passing PTR_TO_MEM where PTR_TO_BTF_ID of in-kernel valid structure is expected, which may have pointers) are avoided. Since the argument checking happens basd on argument register type, it is not easy to ascertain what the expected type is. In the future, support for PTR_TO_MEM for kfunc can be extended to serve other usecases. The struct type whose pointer is passed in may have maximum nesting depth of 4, all recursively composed of scalars or struct with scalars. Future commits will add negative tests that check whether these restrictions imposed for kfunc arguments are duly rejected by BPF verifier or not. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211217015031.1278167-4-memxor@gmail.com
2021-12-18NFSD: Fix READDIR buffer overflowChuck Lever
If a client sends a READDIR count argument that is too small (say, zero), then the buffer size calculation in the new init_dirlist helper functions results in an underflow, allowing the XDR stream functions to write beyond the actual buffer. This calculation has always been suspect. NFSD has never sanity- checked the READDIR count argument, but the old entry encoders managed the problem correctly. With the commits below, entry encoding changed, exposing the underflow to the pointer arithmetic in xdr_reserve_space(). Modern NFS clients attempt to retrieve as much data as possible for each READDIR request. Also, we have no unit tests that exercise the behavior of READDIR at the lower bound of @count values. Thus this case was missed during testing. Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Fixes: f5dcccd647da ("NFSD: Update the NFSv2 READDIR entry encoder to use struct xdr_stream") Fixes: 7f87fc2d34d4 ("NFSD: Update NFSv3 READDIR entry encoders to use struct xdr_stream") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-12-18Merge branch 'Introduce composable bpf types'Alexei Starovoitov
Hao Luo says: ==================== This patch set consists of two changes: - a cleanup of arg_type, ret_type and reg_type which try to make those types composable. (patch 1/9 - patch 6/9) - a bug fix that prevents bpf programs from writing kernel memory. (patch 7/9 - patch 9/9) The purpose of the cleanup is to find a scalable way to express type nullness and read-onliness. This patchset introduces two flags that can be applied on all three types: PTR_MAYBE_NULL and MEM_RDONLY. Previous types such as ARG_XXX_OR_NULL can now be written as ARG_XXX | PTR_MAYBE_NULL Similarly, PTR_TO_RDONLY_BUF is now "PTR_TO_BUF | MEM_RDONLY". Flags can be composed, as ARGs can be both MEM_RDONLY and MAYBE_NULL. ARG_PTR_TO_MEM | PTR_MAYBE_NULL | MEM_RDONLY Based on this new composable types, patch 7/9 applies MEM_RDONLY on PTR_TO_MEM, in order to tag the returned memory from per_cpu_ptr as read-only. Therefore fixing a previous bug that one can leverage per_cpu_ptr to modify kernel memory within BPF programs. Patch 8/9 generalizes the use of MEM_RDONLY further by tagging a set of helper arguments ARG_PTR_TO_MEM with MEM_RDONLY. Some helper functions may override their arguments, such as bpf_d_path, bpf_snprintf. In this patch, we narrow the ARG_PTR_TO_MEM to be compatible with only a subset of memory types. This prevents these helpers from writing read-only memories. For the helpers that do not write its arguments, we add tag MEM_RDONLY to allow taking a RDONLY memory as argument. Changes since v1: - use %u to print base_type(type) instead of %lu. (Andrii, patch 3/9) - improve reg_type_str() by appending '_or_null' and prepending 'rdonly_'. use preallocated buffer in 'bpf_env'. - unified handling of the previous XXX_OR_NULL in adjust_ptr_min_max_vals (Andrii, patch 4/9) - move PTR_TO_MAP_KEY up to PTR_TO_MAP_VALUE so that we don't have to change to drivers that assume the numeric values of bpf_reg. (patch 4/9) - reintroduce the typo from previous commits in fixes tags (Andrii, patch 7/9) - extensive comments on the reason behind folding flags in check_reg_type (Andrii, patch 8/9) Changes since RFC v2: - renamed BPF_BASE_TYPE to a more succinct name base_type and move its definition to bpf_verifier.h. Same for BPF_TYPE_FLAG. (Alexei) - made checking MEM_RDONLY in check_reg_type() universal (Alexei) - ran through majority of test_progs and fixed bugs in RFC v2: - fixed incorrect BPF_BASE_TYPE_MASK. The high bit of GENMASK should be BITS - 1, rather than BITS. patch 1/9. - fixed incorrect conditions when checking ARG_PTR_TO_MAP_VALUE in check_func_arg(). See patch 2/9. - fixed a bug where PTR_TO_BTF_ID may be combined with MEM_RDONLY, causing the check in check_mem_access() to fall through to the 'else' branch. See check_helper_call() in patch 7/9. - fixed build failure on netronome driver. Entries in bpf_reg_type have been ordered. patch 4/9. - fixed build warnings of using '%d' to print base_type. patch 4/9 - unify arg_type_may_be_null() and reg_type_may_be_null() into a single type_may_be_null(). Previous versions: v1: https://lwn.net/Articles/877938/ RFC v2: https://lwn.net/Articles/877171/ RFC v1: https://lore.kernel.org/bpf/20211109003052.3499225-1-haoluo@google.com/T/ https://lore.kernel.org/bpf/20211109021624.1140446-8-haoluo@google.com/T/ ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-12-18bpf/selftests: Test PTR_TO_RDONLY_MEMHao Luo
This test verifies that a ksym of non-struct can not be directly updated. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211217003152.48334-10-haoluo@google.com
2021-12-18bpf: Add MEM_RDONLY for helper args that are pointers to rdonly mem.Hao Luo
Some helper functions may modify its arguments, for example, bpf_d_path, bpf_get_stack etc. Previously, their argument types were marked as ARG_PTR_TO_MEM, which is compatible with read-only mem types, such as PTR_TO_RDONLY_BUF. Therefore it's legitimate, but technically incorrect, to modify a read-only memory by passing it into one of such helper functions. This patch tags the bpf_args compatible with immutable memory with MEM_RDONLY flag. The arguments that don't have this flag will be only compatible with mutable memory types, preventing the helper from modifying a read-only memory. The bpf_args that have MEM_RDONLY are compatible with both mutable memory and immutable memory. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211217003152.48334-9-haoluo@google.com
2021-12-18bpf: Make per_cpu_ptr return rdonly PTR_TO_MEM.Hao Luo
Tag the return type of {per, this}_cpu_ptr with RDONLY_MEM. The returned value of this pair of helpers is kernel object, which can not be updated by bpf programs. Previously these two helpers return PTR_OT_MEM for kernel objects of scalar type, which allows one to directly modify the memory. Now with RDONLY_MEM tagging, the verifier will reject programs that write into RDONLY_MEM. Fixes: 63d9b80dcf2c ("bpf: Introducte bpf_this_cpu_ptr()") Fixes: eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()") Fixes: 4976b718c355 ("bpf: Introduce pseudo_btf_id") Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211217003152.48334-8-haoluo@google.com
2021-12-18bpf: Convert PTR_TO_MEM_OR_NULL to composable types.Hao Luo
Remove PTR_TO_MEM_OR_NULL and replace it with PTR_TO_MEM combined with flag PTR_MAYBE_NULL. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211217003152.48334-7-haoluo@google.com
2021-12-18bpf: Introduce MEM_RDONLY flagHao Luo
This patch introduce a flag MEM_RDONLY to tag a reg value pointing to read-only memory. It makes the following changes: 1. PTR_TO_RDWR_BUF -> PTR_TO_BUF 2. PTR_TO_RDONLY_BUF -> PTR_TO_BUF | MEM_RDONLY Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211217003152.48334-6-haoluo@google.com
2021-12-18bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULLHao Luo
We have introduced a new type to make bpf_reg composable, by allocating bits in the type to represent flags. One of the flags is PTR_MAYBE_NULL which indicates a pointer may be NULL. This patch switches the qualified reg_types to use this flag. The reg_types changed in this patch include: 1. PTR_TO_MAP_VALUE_OR_NULL 2. PTR_TO_SOCKET_OR_NULL 3. PTR_TO_SOCK_COMMON_OR_NULL 4. PTR_TO_TCP_SOCK_OR_NULL 5. PTR_TO_BTF_ID_OR_NULL 6. PTR_TO_MEM_OR_NULL 7. PTR_TO_RDONLY_BUF_OR_NULL 8. PTR_TO_RDWR_BUF_OR_NULL Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211217003152.48334-5-haoluo@google.com
2021-12-18Merge tag 'tty-5.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two small tty/serial fixes for 5.16-rc6. They include: - n_hdlc fix for syzbot reported problem that you were previously copied on. - 8250_fintek driver fix that resolved a console problem by removing a previous change. Both have been in linux-next with no reported issues" * tag 'tty-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_fintek: Fix garbled text for console tty: n_hdlc: make n_hdlc_tty_wakeup() asynchronous
2021-12-18Merge tag 'usb-5.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for reported problems. They include: - dwc2 driver fixes - xhci driver fixes - cdnsp driver fixes - typec driver fix - gadget u_ether driver fix - new quirk additions - usb gadget endpoint calculation fix - usb serial new device ids - revert of a xhci-dbg change that broke early debug booting All changes, except for the revert, have been in linux-next with no reported problems. The revert was from yesterday, and it was reported by the developers affected that it resolved their problem" * tag 'usb-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "usb: early: convert to readl_poll_timeout_atomic()" usb: typec: tcpm: fix tcpm unregister port but leave a pending timer usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04) usb: xhci: Extend support for runtime power management for AMD's Yellow carp. usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe USB: gadget: bRequestType is a bitfield, not a enum USB: serial: option: add Telit FN990 compositions USB: serial: cp210x: fix CP2105 GPIO registration usb: cdnsp: Fix incorrect status for control request usb: cdnsp: Fix issue in cdnsp_log_ep trace event usb: cdnsp: Fix incorrect calling of cdnsp_died function usb: xhci-mtk: fix list_del warning when enable list debug usb: gadget: u_ether: fix race in setting MAC address in setup phase
2021-12-18bpf: Replace RET_XXX_OR_NULL with RET_XXX | PTR_MAYBE_NULLHao Luo
We have introduced a new type to make bpf_ret composable, by reserving high bits to represent flags. One of the flag is PTR_MAYBE_NULL, which indicates a pointer may be NULL. When applying this flag to ret_types, it means the returned value could be a NULL pointer. This patch switches the qualified arg_types to use this flag. The ret_types changed in this patch include: 1. RET_PTR_TO_MAP_VALUE_OR_NULL 2. RET_PTR_TO_SOCKET_OR_NULL 3. RET_PTR_TO_TCP_SOCK_OR_NULL 4. RET_PTR_TO_SOCK_COMMON_OR_NULL 5. RET_PTR_TO_ALLOC_MEM_OR_NULL 6. RET_PTR_TO_MEM_OR_BTF_ID_OR_NULL 7. RET_PTR_TO_BTF_ID_OR_NULL This patch doesn't eliminate the use of these names, instead it makes them aliases to 'RET_PTR_TO_XXX | PTR_MAYBE_NULL'. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211217003152.48334-4-haoluo@google.com
2021-12-18bpf: Replace ARG_XXX_OR_NULL with ARG_XXX | PTR_MAYBE_NULLHao Luo
We have introduced a new type to make bpf_arg composable, by reserving high bits of bpf_arg to represent flags of a type. One of the flags is PTR_MAYBE_NULL which indicates a pointer may be NULL. When applying this flag to an arg_type, it means the arg can take NULL pointer. This patch switches the qualified arg_types to use this flag. The arg_types changed in this patch include: 1. ARG_PTR_TO_MAP_VALUE_OR_NULL 2. ARG_PTR_TO_MEM_OR_NULL 3. ARG_PTR_TO_CTX_OR_NULL 4. ARG_PTR_TO_SOCKET_OR_NULL 5. ARG_PTR_TO_ALLOC_MEM_OR_NULL 6. ARG_PTR_TO_STACK_OR_NULL This patch does not eliminate the use of these arg_types, instead it makes them an alias to the 'ARG_XXX | PTR_MAYBE_NULL'. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211217003152.48334-3-haoluo@google.com
2021-12-18bpf: Introduce composable reg, ret and arg types.Hao Luo
There are some common properties shared between bpf reg, ret and arg values. For instance, a value may be a NULL pointer, or a pointer to a read-only memory. Previously, to express these properties, enumeration was used. For example, in order to test whether a reg value can be NULL, reg_type_may_be_null() simply enumerates all types that are possibly NULL. The problem of this approach is that it's not scalable and causes a lot of duplication. These properties can be combined, for example, a type could be either MAYBE_NULL or RDONLY, or both. This patch series rewrites the layout of reg_type, arg_type and ret_type, so that common properties can be extracted and represented as composable flag. For example, one can write ARG_PTR_TO_MEM | PTR_MAYBE_NULL which is equivalent to the previous ARG_PTR_TO_MEM_OR_NULL The type ARG_PTR_TO_MEM are called "base type" in this patch. Base types can be extended with flags. A flag occupies the higher bits while base types sits in the lower bits. This patch in particular sets up a set of macro for this purpose. The following patches will rewrite arg_types, ret_types and reg_types respectively. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211217003152.48334-2-haoluo@google.com
2021-12-18Merge tag 'perf-tools-fixes-for-v5.16-2021-12-18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix segfaults in 'perf inject' related to usage of unopened files - The return value of hashmap__new() should be checked using IS_ERR() * tag 'perf-tools-fixes-for-v5.16-2021-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf inject: Fix segfault due to perf_data__fd() without open perf inject: Fix segfault due to close without open perf expr: Fix missing check for return value of hashmap__new()
2021-12-18qlcnic: potential dereference null pointer of rx_queue->page_ringJiasheng Jiang
The return value of kcalloc() needs to be checked. To avoid dereference of null pointer in case of the failure of alloc. Therefore, it might be better to change the return type of qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and return 0 the others. Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable() should deal with the return value of qlcnic_sriov_alloc_vlans(). Fixes: 154d0c810c53 ("qlcnic: VLAN enhancement for 84XX adapters") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-18xdp: move the if dev statements to the firstYajun Deng
The xdp_rxq_info_unreg() called by xdp_rxq_info_reg() is meaningless when dev is NULL, so move the if dev statements to the first. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-18ax25: NPD bug when detaching AX25 deviceLin Ma
The existing cleanup routine implementation is not well synchronized with the syscall routine. When a device is detaching, below race could occur. static int ax25_sendmsg(...) { ... lock_sock() ax25 = sk_to_ax25(sk); if (ax25->ax25_dev == NULL) // CHECK ... ax25_queue_xmit(skb, ax25->ax25_dev->dev); // USE ... } static void ax25_kill_by_device(...) { ... if (s->ax25_dev == ax25_dev) { s->ax25_dev = NULL; ... } Other syscall functions like ax25_getsockopt, ax25_getname, ax25_info_show also suffer from similar races. To fix them, this patch introduce lock_sock() into ax25_kill_by_device in order to guarantee that the nullify action in cleanup routine cannot proceed when another socket request is pending. Signed-off-by: Hanjie Wu <nagi@zju.edu.cn> Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-18hamradio: improve the incomplete fix to avoid NPDLin Ma
The previous commit 3e0588c291d6 ("hamradio: defer ax25 kfree after unregister_netdev") reorder the kfree operations and unregister_netdev operation to prevent UAF. This commit improves the previous one by also deferring the nullify of the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs. Partial of the stack trace is shown below. BUG: kernel NULL pointer dereference, address: 0000000000000538 RIP: 0010:ax_xmit+0x1f9/0x400 ... Call Trace: dev_hard_start_xmit+0xec/0x320 sch_direct_xmit+0xea/0x240 __qdisc_run+0x166/0x5c0 __dev_queue_xmit+0x2c7/0xaf0 ax25_std_establish_data_link+0x59/0x60 ax25_connect+0x3a0/0x500 ? security_socket_connect+0x2b/0x40 __sys_connect+0x96/0xc0 ? __hrtimer_init+0xc0/0xc0 ? common_nsleep+0x2e/0x50 ? switch_fpu_return+0x139/0x1a0 __x64_sys_connect+0x11/0x20 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The crash point is shown as below static void ax_encaps(...) { ... set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL! ... } By placing the nullify action after the unregister_netdev, the ax->tty pointer won't be assigned as NULL net_device framework layer is well synchronized. Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-18Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-12-17 Brett Creeley says: This patch series adds support in the iavf driver for communicating and using VIRTCHNL_VF_OFFLOAD_VLAN_V2. The current VIRTCHNL_VF_OFFLOAD_VLAN is very limited and covers all 802.1Q VLAN offloads and filtering with no granularity. The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 adds more granularity, flexibility, and support for 802.1ad offloads and filtering. This includes the VF negotiating which VLAN offloads/filtering it's allowed, where VLAN tags should be inserted and/or stripped into and from descriptors, and the supported VLAN protocols. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-18Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-17 Maciej Fijalkowski says: It seems that previous [0] Rx fix was not enough and there are still issues with AF_XDP Rx ZC support in ice driver. Elza reported that for multiple XSK sockets configured on a single netdev, some of them were becoming dead after a while. We have spotted more things that needed to be addressed this time. More of information can be found in particular commit messages. It also carries Alexandr's patch that was sent previously which was overlapping with this set. [0]: https://lore.kernel.org/bpf/20211129231746.2767739-1-anthony.l.nguyen@intel.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-18perf inject: Fix segfault due to perf_data__fd() without openAdrian Hunter
The fixed commit attempts to get the output file descriptor even if the file was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. __GI___fileno (fp=0x0) at fileno.c:35 35 fileno.c: No such file or directory. (gdb) bt #0 __GI___fileno (fp=0x0) at fileno.c:35 #1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72 #2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69 #3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017 #4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313 #5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539 (gdb) Fixes: 0ae03893623dd1dd ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-18perf inject: Fix segfault due to close without openAdrian Hunter
The fixed commit attempts to close inject.output even if it was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 48 iofclose.c: No such file or directory. (gdb) bt #0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 #1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376 #2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085 #3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313 #4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 #6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539 (gdb) Fixes: 02e6246f5364d526 ("perf inject: Close inject.output on exit") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-18perf expr: Fix missing check for return value of hashmap__new()Miaoqian Lin
The hashmap__new() function may return ERR_PTR(-ENOMEM) when malloc() fails, add IS_ERR() checking for ctx->ids. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20211212062504.25841-1-linmq006@gmail.com [ s/kfree()/free()/ and add missing linux/err.h include ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-18mt76: mt7921: add support for PCIe ID 0x0608/0x0616Deren Wu
New mt7921 serials chip support Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18mt76: testmode: add support to set MACShayne Chen
Add support to set SA/DA/BSSID in testmode. During mass production stage, some test scripts or test equipments need to set fixed addresses to detect or parse if a test is passed. Also, MAC setting is necessary for some tx/rx tests with rx filter, to make sure rx site only receives expected packets. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-09-15 04:50:15 +0000