summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-12-03net: hns3: optimize function hclge_cfg_common_loopback()Yufeng Mo
hclge_cfg_common_loopback() is a bit too long, so encapsulate hclge_cfg_common_loopback_cmd_send() and hclge_cfg_common_loopback_wait() two functions to improve readability. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-03bus: mhi: pci_generic: Fix device recovery failed issueSlark Xiao
For Foxconn T99W175 device(sdx55 platform) in some host platform, it would be unavailable once the host execute the err handler. After checking, it's caused by the delay time too short to get a successful reset. Please see my test evidence as bewlow(BTW, I add some extra test logs in function mhi_pci_reset_prepare and mhi_pci_reset_done): When MHI_POST_RESET_DELAY_MS equals to 500ms: Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222477] mhi mhi0: Device MHI is not in valid state Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222628] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222631] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 14:30:03 jbd-ThinkEdge kernel: [ 146.222632] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.839993] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 14:30:05 jbd-ThinkEdge kernel: [ 147.902063] mhi-pci-generic 0000:2d:00.0: reset failed When MHI_POST_RESET_DELAY_MS equals to 1000ms or 1500ms: Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.067857] mhi mhi0: Device MHI is not in valid state Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068029] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068032] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 19:07:26 jbd-ThinkEdge kernel: [ 157.068034] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607006] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 19:07:29 jbd-ThinkEdge kernel: [ 159.607152] mhi mhi0: Requested to power ON Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.302872] mhi mhi0: Failed to reset MHI due to syserr state Nov 4 19:07:51 jbd-ThinkEdge kernel: [ 181.303011] mhi-pci-generic 0000:2d:00.0: failed to power up MHI controller When MHI_POST_RESET_DELAY_MS equals to 2000ms: Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180527] mhi mhi0: Failed to transition from PM state: Linkdown or Error Fatal Detect to: SYS ERROR Process Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180535] mhi mhi0: Device MHI is not in valid state Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180722] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare reset Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180725] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_prepare mhi_soc_reset Nov 4 17:51:08 jbd-ThinkEdge kernel: [ 147.180727] mhi mhi0: mhi_soc_reset write soc to reset Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230787] mhi-pci-generic 0000:2d:00.0: mhi_pci_reset_done Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.230928] mhi mhi0: Requested to power ON Nov 4 17:51:11 jbd-ThinkEdge kernel: [ 150.231173] mhi mhi0: Power on setup success Nov 4 17:51:14 jbd-ThinkEdge kernel: [ 153.254747] mhi mhi0: Wait for device to enter SBL or Mission mode I also tried big data like 3000, and it worked as well. 500ms may not be enough for all support mhi device. We shall increase it to 2000ms at least. Link: https://lore.kernel.org/r/20211108113127.3938-1-slark_xiao@163.com [mani: massaged commit message little bit, added Fixes tag and CCed stable] Fixes: 8ccc3279fcad ("mhi: pci_generic: Add support for reset") Cc: stable@vger.kernel.org Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20211126104951.35685-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-03Merge tag 'phy-fixes-5.16' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy: fixes for 5.16 Fixes for: - kernel-doc warnings for various drivers - error handling fix for HiSilicon driver - name fix for zynqmp phy - property name fix in stm32 phy * tag 'phy-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: HiSilicon: Fix copy and paste bug in error handling dt-bindings: phy: zynqmp-psgtr: fix USB phy name phy: ti: omap-usb2: Fix the kernel-doc style phy: qualcomm: ipq806x-usb: Fix kernel-doc style phy: ti: tusb1210: Fix the kernel-doc warn phy: qualcomm: usb-hsic: Fix the kernel-doc warn phy: qualcomm: qmp: Add missing struct documentation phy: mvebu-cp110-utmi: Fix kernel-doc warns phy: ti: report 2 non-kernel-doc comments phy: stm32: fix st,slow-hs-slew-rate with st,decrease-hs-slew-rate
2021-12-03HID: intel-ish-hid: ipc: only enable IRQ wakeup when requestedThomas Weißschuh
Fixes spurious wakeups from s0ix on Lenovo ThinkPad X1 Cargon Gen 9 on lid close. These wakeups are generated by interrupts from the ISH on changes to the lid status. By disabling the wake IRQ from the ISH we inhibit these spurious wakeups while keeping the resume from LID open through the ACPI interrupt. Reports on the Lenovo forums indicate that Lenovo ThinkPad X1 Yoga Gen6 is also affected. Fixes: ae02e5d40d5f ("HID: intel-ish-hid: ipc layer") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214855 Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211130060117.3026-1-linux@weissschuh.net
2021-12-03HID: google: add eel USB idxiazhengqiao
Add one additional hammer-like device. Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211203030119.28612-1-xiazhengqiao@huaqin.corp-partner.google.com
2021-12-03HID: add USB_HID dependancy to hid-prodikeysGreg Kroah-Hartman
The prodikeys HID driver only controls USB devices, yet did not have a dependancy on USB_HID. This causes build errors on some configurations like nios2 when building due to new changes to the prodikeys driver. Reported-by: kernel test robot <lkp@intel.com> Cc: stable@vger.kernel.org Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211203081231.2856936-1-gregkh@linuxfoundation.org
2021-12-03HID: add USB_HID dependancy to hid-chiconyGreg Kroah-Hartman
The chicony HID driver only controls USB devices, yet did not have a dependancy on USB_HID. This causes build errors on some configurations like sparc when building due to new changes to the chicony driver. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: stable@vger.kernel.org Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211203075927.2829218-1-gregkh@linuxfoundation.org
2021-12-03x86/64/mm: Map all kernel memory into trampoline_pgdJoerg Roedel
The trampoline_pgd only maps the 0xfffffff000000000-0xffffffffffffffff range of kernel memory (with 4-level paging). This range contains the kernel's text+data+bss mappings and the module mapping space but not the direct mapping and the vmalloc area. This is enough to get the application processors out of real-mode, but for code that switches back to real-mode the trampoline_pgd is missing important parts of the address space. For example, consider this code from arch/x86/kernel/reboot.c, function machine_real_restart() for a 64-bit kernel: #ifdef CONFIG_X86_32 load_cr3(initial_page_table); #else write_cr3(real_mode_header->trampoline_pgd); /* Exiting long mode will fail if CR4.PCIDE is set. */ if (boot_cpu_has(X86_FEATURE_PCID)) cr4_clear_bits(X86_CR4_PCIDE); #endif /* Jump to the identity-mapped low memory code */ #ifdef CONFIG_X86_32 asm volatile("jmpl *%0" : : "rm" (real_mode_header->machine_real_restart_asm), "a" (type)); #else asm volatile("ljmpl *%0" : : "m" (real_mode_header->machine_real_restart_asm), "D" (type)); #endif The code switches to the trampoline_pgd, which unmaps the direct mapping and also the kernel stack. The call to cr4_clear_bits() will find no stack and crash the machine. The real_mode_header pointer below points into the direct mapping, and dereferencing it also causes a crash. The reason this does not crash always is only that kernel mappings are global and the CR3 switch does not flush those mappings. But if theses mappings are not in the TLB already, the above code will crash before it can jump to the real-mode stub. Extend the trampoline_pgd to contain all kernel mappings to prevent these crashes and to make code which runs on this page-table more robust. Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20211202153226.22946-5-joro@8bytes.org
2021-12-03objtool: Fix pv_ops noinstr validationPeter Zijlstra
Boris reported that in one of his randconfig builds, objtool got infinitely stuck. Turns out there's trivial list corruption in the pv_ops tracking when a function is both in a static table and in a code assignment. Avoid re-adding function to the pv_ops[] lists when they're already on it. Fixes: db2b0c5d7b6f ("objtool: Support pv_opsindirect calls for noinstr") Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20211202204534.GA16608@worktop.programming.kicks-ass.net
2021-12-02Merge tag 'mlx5-updates-2021-12-02' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-12-02 Misc updates to mlx5 driver 1) Various code cleanups 2) Error path handling fixes of latest features 3) Print more information on pci error handling 4) Dynamically resize flow counters query buffer ==================== Link: https://lore.kernel.org/r/20211203005622.183325-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-02scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc()Igor Pylypiv
Calling scsi_remove_host() before scsi_add_host() results in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000108 RIP: 0010:device_del+0x63/0x440 Call Trace: device_unregister+0x17/0x60 scsi_remove_host+0xee/0x2a0 pm8001_pci_probe+0x6ef/0x1b90 [pm80xx] local_pci_probe+0x3f/0x90 We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host() has not been called yet at that point in time. Function call tree: pm8001_pci_probe() | `- pm8001_pci_alloc() | | | `- pm8001_alloc() | | | `- scsi_remove_host() | `- scsi_add_host() Link: https://lore.kernel.org/r/20211201041627.1592487-1-ipylypiv@google.com Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-02selftests/fib_tests: Rework fib_rp_filter_test()Peilin Ye
Currently rp_filter tests in fib_tests.sh:fib_rp_filter_test() are failing. ping sockets are bound to dummy1 using the "-I" option (SO_BINDTODEVICE), but socket lookup is failing when receiving ping replies, since the routing table thinks they belong to dummy0. For example, suppose ping is using a SOCK_RAW socket for ICMP messages. When receiving ping replies, in __raw_v4_lookup(), sk->sk_bound_dev_if is 3 (dummy1), but dif (skb_rtable(skb)->rt_iif) says 2 (dummy0), so the raw_sk_bound_dev_eq() check fails. Similar things happen in ping_lookup() for SOCK_DGRAM sockets. These tests used to pass due to a bug [1] in iputils, where "ping -I" actually did not bind ICMP message sockets to device. The bug has been fixed by iputils commit f455fee41c07 ("ping: also bind the ICMP socket to the specific device") in 2016, which is why our rp_filter tests started to fail. See [2] . Fixing the tests while keeping everything in one netns turns out to be nontrivial. Rework the tests and build the following topology: ┌─────────────────────────────┐ ┌─────────────────────────────┐ │ network namespace 1 (ns1) │ │ network namespace 2 (ns2) │ │ │ │ │ │ ┌────┐ ┌─────┐ │ │ ┌─────┐ ┌────┐ │ │ │ lo │<───>│veth1│<────────┼────┼─>│veth2│<──────────>│ lo │ │ │ └────┘ ├─────┴──────┐ │ │ ├─────┴──────┐ └────┘ │ │ │192.0.2.1/24│ │ │ │192.0.2.1/24│ │ │ └────────────┘ │ │ └────────────┘ │ └─────────────────────────────┘ └─────────────────────────────┘ Consider sending an ICMP_ECHO packet A in ns2. Both source and destination IP addresses are 192.0.2.1, and we use strict mode rp_filter in both ns1 and ns2: 1. A is routed to lo since its destination IP address is one of ns2's local addresses (veth2); 2. A is redirected from lo's egress to veth2's egress using mirred; 3. A arrives at veth1's ingress in ns1; 4. A is redirected from veth1's ingress to lo's ingress, again, using mirred; 5. In __fib_validate_source(), fib_info_nh_uses_dev() returns false, since A was received on lo, but reverse path lookup says veth1; 6. However A is not dropped since we have relaxed this check for lo in commit 66f8209547cc ("fib: relax source validation check for loopback packets"); Making sure A is not dropped here in this corner case is the whole point of having this test. 7. As A reaches the ICMP layer, an ICMP_ECHOREPLY packet, B, is generated; 8. Similarly, B is redirected from lo's egress to veth1's egress (in ns1), then redirected once again from veth2's ingress to lo's ingress (in ns2), using mirred. Also test "ping 127.0.0.1" from ns2. It does not trigger the relaxed check in __fib_validate_source(), but just to make sure the topology works with loopback addresses. Tested with ping from iputils 20210722-41-gf9fb573: $ ./fib_tests.sh -t rp_filter IPv4 rp_filter tests TEST: rp_filter passes local packets [ OK ] TEST: rp_filter passes loopback packets [ OK ] [1] https://github.com/iputils/iputils/issues/55 [2] https://github.com/iputils/iputils/commit/f455fee41c077d4b700a473b2f5b3487b8febc1d Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: adb701d6cfa4 ("selftests: add a test case for rp_filter") Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211201004720.6357-1-yepeilin.cs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-02clk: imx: use module_platform_driverMiles Chen
Replace builtin_platform_driver_probe with module_platform_driver_probe because CONFIG_CLK_IMX8QXP can be set to =m (kernel module). Fixes: e0d0d4d86c766 ("clk: imx8qxp: Support building i.MX8QXP clock driver as module") Cc: Fabio Estevam <festevam@gmail.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Miles Chen <miles.chen@mediatek.com> Link: https://lore.kernel.org/r/20210904235418.2442-1-miles.chen@mediatek.com Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-12-02clk: qcom: clk-alpha-pll: Don't reconfigure running TrionBjorn Andersson
In the event that the bootloader has configured the Trion PLL as source for the display clocks, e.g. for the continuous splashscreen, then there will also be RCGs that are clocked by this instance. Reconfiguring, and in particular disabling the output of, the PLL will cause issues for these downstream RCGs and has been shown to prevent them from being re-parented. Follow downstream and skip configuration if it's determined that the PLL is already running. Fixes: 59128c20a6a9 ("clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20211123162508.153711-1-bjorn.andersson@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-12-02net/mlx5: Dynamically resize flow counters query bufferAvihai Horon
The flow counters bulk query buffer is allocated once during mlx5_fc_init_stats(). For PFs and VFs this buffer usually takes a little more than 512KB of memory, which is aligned to the next power of 2, to 1MB. For SFs, this buffer is reduced and takes around 128 Bytes. The buffer size determines the maximum number of flow counters that can be queried at a time. Thus, having a bigger buffer can improve performance for users that need to query many flow counters. There are cases that don't use many flow counters and don't need a big buffer (e.g. SFs, VFs). Since this size is critical with large scale, in these cases the buffer size should be reduced. In order to reduce memory consumption while maintaining query performance, change the query buffer's allocation scheme to the following: - First allocate the buffer with small initial size. - If the number of counters surpasses the initial size, resize the buffer to the maximum size. The buffer only grows and isn't shrank, because users with many flow counters don't care about the buffer size and we don't want to add resize overhead if the current number of counters drops. This solution is preferable to the current one, which is less accurate and only addresses SFs. Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02net/mlx5e: TC, Set flow attr ip_version earlierRoi Dayan
Setting flow attr ip_version is not related to parsing tc flow actions. It needs to be set after parsing flower matches which changes the spec. So move it outside parse_tc_fdb_actions() and set it in __mlx5e_add_fdb_flow(). Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02net/mlx5e: TC, Move common flow_action checks into functionRoi Dayan
Remove duplicate checks on flow_action by using common function. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02net/mlx5e: Remove redundant actions arg from vlan push/pop funcsRoi Dayan
Passing actions is redundant and can be retrieved from flow attr. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02net/mlx5e: Remove redundant actions arg from validate_goto_chain()Roi Dayan
Passing actions is redundant and can be retrieved from flow. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02net/mlx5e: TC, Remove redundant action stack varRoi Dayan
Remove the action stack var from parse tc fdb actions and prase tc nic actions, use the flow attr action var directly. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02net/mlx5e: Hide function mlx5e_num_channels_changedTariq Toukan
No calls for mlx5e_num_channels_changed() out of en_main.c, turn it static and remove from header. Keep the wrapper function mlx5e_num_channels_changed_ctx exposed. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02net/mlx5e: SHAMPO, clean MLX5E_MAX_KLM_PER_WQE macroBen Ben-Ishay
This commit reduces unused variable from MLX5E_MAX_KLM_PER_WQE macro that introduced by commit d7b896acbdcb ("net/mlx5e: Add support to klm_umr_wqe"). Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02net/mlx5: Print more info on pci error handlersSaeed Mahameed
In case mlx5_pci_err_detected was called with state equals to pci_channel_io_perm_failure, the driver will never come back up. It is nice to know why the driver went to zombie land, so print some useful information on pci err handlers. Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
2021-12-02net/mlx5: SF, silence an uninitialized variable warningDan Carpenter
This code sometimes calls mlx5_sf_hw_table_hwc_init() when "ext_base_id" is uninitialized. It's not used on that path, but it generates a static checker warning to pass uninitialized variables to another function. It may also generate runtime UBSan warnings depending on if the mlx5_sf_hw_table_hwc_init() function is inlined or not. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'Christophe JAILLET
All the error handling paths of 'mlx5e_tc_add_fdb_flow()' end to 'err_out' where 'flow_flag_set(flow, FAILED);' is called. All but the new error handling paths added by the commits given in the Fixes tag below. Fix these error handling paths and branch to 'err_out'. Fixes: 166f431ec6be ("net/mlx5e: Add indirect tc offload of ovs internal port") Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02net/mlx5: Fix error return code in esw_qos_create()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 85c5f7c9200e ("net/mlx5: E-switch, Create QoS on demand") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02mlx5: fix mlx5i_grp_sw_update_stats() stack usageArnd Bergmann
The mlx5e_sw_stats structure has grown to the point of triggering a warning when put on the stack of a function: mlx5/core/ipoib/ipoib.c: In function 'mlx5i_grp_sw_update_stats': mlx5/core/ipoib/ipoib.c:136:1: error: the frame size of 1028 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] In this case, only five of the structure members are actually set, so it's sufficient to have those as separate local variables. As en_rep.c uses 'struct rtnl_link_stats64' for this, just use the same one here for consistency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02mlx5: fix psample_sample_packet link errorArnd Bergmann
When PSAMPLE is a loadable module, built-in drivers cannot use it: aarch64-linux-ld: drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.o: in function `mlx5e_tc_sample_skb': sample.c:(.text+0xd68): undefined reference to `psample_sample_packet' Add the same dependency here that is used for MLXSW Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-02Merge branch 'Deprecate bpf_prog_load_xattr() API'Alexei Starovoitov
Andrii Nakryiko says: ==================== Few lines in the last patch to mark bpf_prog_load_xattr() deprecated required a decent amount of clean ups in all the other patches. samples/bpf is big part of the clean up. This patch set also bumps libbpf version to 0.7, as libbpf v0.6 release will be cut shortly. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-12-02libbpf: Deprecate bpf_prog_load_xattr() APIAndrii Nakryiko
bpf_prog_load_xattr() is high-level API that's named as a low-level BPF_PROG_LOAD wrapper APIs, but it actually operates on struct bpf_object. It's badly and confusingly misnamed as it will load all the progs insige bpf_object, returning prog_fd of the very first BPF program. It also has a bunch of ad-hoc things like log_level override, map_ifindex auto-setting, etc. All this can be expressed more explicitly and cleanly through existing libbpf APIs. This patch marks bpf_prog_load_xattr() for deprecation in libbpf v0.8 ([0]). [0] Closes: https://github.com/libbpf/libbpf/issues/308 Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211201232824.3166325-10-andrii@kernel.org
2021-12-02samples/bpf: Get rid of deprecated libbpf API usesAndrii Nakryiko
Replace deprecated APIs with new ones. Also mute source code using deprecated AF_XDP (xsk.h). Figuring out what to do with all the AF_XDP stuff is a separate problem that should be solved with its own set of changes. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211201232824.3166325-9-andrii@kernel.org
2021-12-02samples/bpf: Clean up samples/bpf build failesAndrii Nakryiko
Remove xdp_samples_user.o rule redefinition which generates Makefile warning and instead override TPROGS_CFLAGS. This seems to work fine when building inside selftests/bpf. That was one big head-scratcher before I found that generic Makefile.target hid this surprising specialization for for xdp_samples_user.o. Main change is to use actual locally installed libbpf headers. Also drop printk macro re-definition (not even used!). Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211201232824.3166325-8-andrii@kernel.org
2021-12-02selftests/bpf: Remove all the uses of deprecated bpf_prog_load_xattr()Andrii Nakryiko
Migrate all the selftests that were still using bpf_prog_load_xattr(). Few are converted to skeleton, others will use bpf_object__open_file() API. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211201232824.3166325-7-andrii@kernel.org
2021-12-02selftests/bpf: Mute xdpxceiver.c's deprecation warningsAndrii Nakryiko
xdpxceiver.c is using AF_XDP APIs that are deprecated starting from libbpf 0.7. Until we migrate the test to libxdp or solve this issue in some other way, mute deprecation warnings within xdpxceiver.c. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211201232824.3166325-6-andrii@kernel.org
2021-12-02selftests/bpf: Remove recently reintroduced legacy btf__dedup() useAndrii Nakryiko
We've added one extra patch that added back the use of legacy btf__dedup() variant. Clean that up. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211201232824.3166325-5-andrii@kernel.org
2021-12-02bpftool: Migrate off of deprecated bpf_create_map_xattr() APIAndrii Nakryiko
Switch to bpf_map_create() API instead. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211201232824.3166325-4-andrii@kernel.org
2021-12-02libbpf: Add API to get/set log_level at per-program levelAndrii Nakryiko
Add bpf_program__set_log_level() and bpf_program__log_level() to fetch and adjust log_level sent during BPF_PROG_LOAD command. This allows to selectively request more or less verbose output in BPF verifier log. Also bump libbpf version to 0.7 and make these APIs the first in v0.7. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211201232824.3166325-3-andrii@kernel.org
2021-12-02libbpf: Use __u32 fields in bpf_map_create_optsAndrii Nakryiko
Corresponding Linux UAPI struct uses __u32, not int, so keep it consistent. Fixes: 992c4225419a ("libbpf: Unify low-level map creation APIs w/ new bpf_map_create()") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211201232824.3166325-2-andrii@kernel.org
2021-12-02clk: qcom: regmap-mux: fix parent clock lookupDmitry Baryshkov
The function mux_get_parent() uses qcom_find_src_index() to find the parent clock index, which is incorrect: qcom_find_src_index() uses src enum for the lookup, while mux_get_parent() should use cfg field (which corresponds to the register value). Add qcom_find_cfg_index() function doing this kind of lookup and use it for mux parent lookup. Fixes: df964016490b ("clk: qcom: add parent map for regmap mux") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211115233407.1046179-1-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-12-02Merge tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Bit of an uptick in patch count this week, though it's all relatively small overall. I suspect msm has been queuing up a few fixes to skew it here. Otherwise amdgpu has a scattered bunch of small fixes, and then some vc4, i915. virtio-gpu changes an rc1 introduced uAPI mistake, and makes it operate more like other drivers. This should be fine as no userspace relies on the behaviour yet. Summary: dma-buf: - memory leak fix msm: - kasan found memory overwrite - mmap flags - fencing error bug - ioctl NULL ptr - uninit var - devfreqless devices fix - dsi lanes fix - dp: avoid unpowered aux xfers amdgpu: - IP discovery based enumeration fixes - vkms fixes - DSC fixes for DP MST - Audio fix for hotplug with tiled displays - Misc display fixes - DP tunneling fix - DP fix - Aldebaran fix amdkfd: - Locking fix - Static checker fix - Fix double free i915: - backlight regression - Intel HDR backlight detection fix - revert TGL workaround that caused hangs virtio-gpu: - switch back to drm_poll vc4: - memory leak - error check fix - HVS modesetting fixes" * tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm: (41 commits) Revert "drm/i915: Implement Wa_1508744258" drm/amdkfd: process_info lock not needed for svm drm/amdgpu: adjust the kfd reset sequence in reset sriov function drm/amd/display: add connector type check for CRC source set drm/amdkfd: fix double free mem structure drm/amdkfd: set "r = 0" explicitly before goto drm/amd/display: Add work around for tunneled MST. drm/amd/display: Fix for the no Audio bug with Tiled Displays drm/amd/display: Clear DPCD lane settings after repeater training drm/amd/display: Allow DSC on supported MST branch devices drm/amdgpu: Don't halt RLC on GFX suspend drm/amdgpu: fix the missed handling for SDMA2 and SDMA3 drm/amdgpu: check atomic flag to differeniate with legacy path drm/amdgpu: cancel the correct hrtimer on exit drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLID drm/i915/dp: Perform 30ms delay after source OUI write dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flow drm/i915: Add support for panels with VESA backlights with PWM enable/disable drm/vc4: kms: Fix previous HVS commit wait drm/vc4: kms: Don't duplicate pending commit ...
2021-12-02Merge branch 'Fixes for kfunc-mod regressions and warnings'Andrii Nakryiko
Kumar Kartikeya says: ==================== This set includes fixes for two regressions and one build warning introduced by the kfunc for modules series. Changelog: ---------- v1 -> v2: v1: https://lore.kernel.org/bpf/20211115191840.496263-1-memxor@gmail.com * Instead of demoting resolve_btfids warning to debug, only skip in case of set->cnt == 0. ==================== Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2021-12-02tools/resolve_btfids: Skip unresolved symbol warning for empty BTF setsKumar Kartikeya Dwivedi
resolve_btfids prints a warning when it finds an unresolved symbol, (id == 0) in id_patch. This can be the case for BTF sets that are empty (due to disabled config options), hence printing warnings for certain builds, most recently seen in [0]. The reason behind this is because id->cnt aliases id->id in btf_id struct, leading to empty set showing up as ID 0 when we get to id_patch, which triggers the warning. Since sets are an exception here, accomodate by reusing hole in btf_id for bool is_set member, setting it to true for BTF set when setting id->cnt, and use that to skip extraneous warning. [0]: https://lore.kernel.org/all/1b99ae14-abb4-d18f-cc6a-d7e523b25542@gmail.com Before: ; ./tools/bpf/resolve_btfids/resolve_btfids -v -b vmlinux net/ipv4/tcp_cubic.ko adding symbol tcp_cubic_kfunc_ids WARN: resolve_btfids: unresolved symbol tcp_cubic_kfunc_ids patching addr 0: ID 0 [tcp_cubic_kfunc_ids] sorting addr 4: cnt 0 [tcp_cubic_kfunc_ids] update ok for net/ipv4/tcp_cubic.ko After: ; ./tools/bpf/resolve_btfids/resolve_btfids -v -b vmlinux net/ipv4/tcp_cubic.ko adding symbol tcp_cubic_kfunc_ids patching addr 0: ID 0 [tcp_cubic_kfunc_ids] sorting addr 4: cnt 0 [tcp_cubic_kfunc_ids] update ok for net/ipv4/tcp_cubic.ko Fixes: 0e32dfc80bae ("bpf: Enable TCP congestion control kfunc from modules") Reported-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20211122144742.477787-4-memxor@gmail.com
2021-12-02bpf: Fix bpf_check_mod_kfunc_call for built-in modulesKumar Kartikeya Dwivedi
When module registering its set is built-in, THIS_MODULE will be NULL, hence we cannot return early in case owner is NULL. Fixes: 14f267d95fe4 ("bpf: btf: Introduce helpers for dynamic BTF set registration") Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20211122144742.477787-3-memxor@gmail.com
2021-12-02bpf: Make CONFIG_DEBUG_INFO_BTF depend upon CONFIG_BPF_SYSCALLKumar Kartikeya Dwivedi
Vinicius Costa Gomes reported [0] that build fails when CONFIG_DEBUG_INFO_BTF is enabled and CONFIG_BPF_SYSCALL is disabled. This leads to btf.c not being compiled, and then no symbol being present in vmlinux for the declarations in btf.h. Since BTF is not useful without enabling BPF subsystem, disallow this combination. However, theoretically disabling both now could still fail, as the symbol for kfunc_btf_id_list variables is not available. This isn't a problem as the compiler usually optimizes the whole register/unregister call, but at lower optimization levels it can fail the build in linking stage. Fix that by adding dummy variables so that modules taking address of them still work, but the whole thing is a noop. [0]: https://lore.kernel.org/bpf/20211110205418.332403-1-vinicius.gomes@intel.com Fixes: 14f267d95fe4 ("bpf: btf: Introduce helpers for dynamic BTF set registration") Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20211122144742.477787-2-memxor@gmail.com
2021-12-02selftests/bpf: Update test names for xchg and cmpxchgPaul E. McKenney
The test_cmpxchg() and test_xchg() functions say "test_run add". Therefore, make them say "test_run cmpxchg" and "test_run xchg", respectively. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211201005030.GA3071525@paulmck-ThinkPad-P17-Gen-1
2021-12-03Merge tag 'drm-intel-fixes-2021-12-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fixing a regression where the backlight brightness control stopped working. - Fix the Intel HDR backlight support detection. - Reverting a w/a to fix a gpu Hang in TGL. The w/a itself was also for a hang, but in a much rarer scenario. The proper solution need to be done with help from user space and it will be addressed later. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yakf9hdnR5or+zNP@intel.com
2021-12-03Merge tag 'drm-misc-fixes-2021-12-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Switch back to drm_poll for virtio, multiple fixes (memory leak, improper error check, some functional fixes too) for vc4, memory leak fix in dma-buf, Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211202084440.u3b7lbeulj7k3ltg@houat
2021-12-02selftests/bpf: Build testing_helpers.o out of treeJean-Philippe Brucker
Add $(OUTPUT) prefix to testing_helpers.o, so it can be built out of tree when necessary. At the moment, in addition to being built in-tree even when out-of-tree is required, testing_helpers.o is not built with the right recipe when cross-building. For consistency the other helpers, cgroup_helpers and trace_helpers, can also be passed as objects instead of source. Use *_HELPERS variable to keep the Makefile readable. Fixes: f87c1930ac29 ("selftests/bpf: Merge test_stub.c into testing_helpers.c") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20211201145101.823159-1-jean-philippe@linaro.org
2021-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-02Merge tag 'net-5.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, and wireguard. Mostly scattered driver changes this week, with one big clump in mv88e6xxx. Nothing of note, really. Current release - regressions: - smc: keep smc_close_final()'s error code during active close Current release - new code bugs: - iwlwifi: various static checker fixes (int overflow, leaks, missing error codes) - rtw89: fix size of firmware header before transfer, avoid crash - mt76: fix timestamp check in tx_status; fix pktid leak; - mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set() Previous releases - regressions: - smc: fix list corruption in smc_lgr_cleanup_early - ipv4: convert fib_num_tclassid_users to atomic_t Previous releases - always broken: - tls: fix authentication failure in CCM mode - vrf: reset IPCB/IP6CB when processing outbound pkts, prevent incorrect processing - dsa: mv88e6xxx: fixes for various device errata - rds: correct socket tunable error in rds_tcp_tune() - ipv6: fix memory leak in fib6_rule_suppress - wireguard: reset peer src endpoint when netns exits - wireguard: improve resilience to DoS around incoming handshakes - tcp: fix page frag corruption on page fault which involves TCP - mpls: fix missing attributes in delete notifications - mt7915: fix NULL pointer dereference with ad-hoc mode Misc: - rt2x00: be more lenient about EPROTO errors during start - mlx4_en: update reported link modes for 1/10G" * tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: dsa: b53: Add SPI ID table gro: Fix inconsistent indenting selftests: net: Correct case name net/rds: correct socket tunable error in rds_tcp_tune() mctp: Don't let RTM_DELROUTE delete local routes net/smc: Keep smc_close_final rc during active close ibmvnic: drop bad optimization in reuse_tx_pools() ibmvnic: drop bad optimization in reuse_rx_pools() net/smc: fix wrong list_del in smc_lgr_cleanup_early Fix Comment of ETH_P_802_3_MIN ethernet: aquantia: Try MAC address from device tree ipv4: convert fib_num_tclassid_users to atomic_t net: avoid uninit-value from tcp_conn_request net: annotate data-races on txq->xmit_lock_owner octeontx2-af: Fix a memleak bug in rvu_mbox_init() net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family ...
generated by cgit (git 2.34.1) at 2025-09-23 14:49:40 +0000