summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-22mac80211: notify driver on subsequent CSA beaconsSara Sharon
Some drivers may want to track further the CSA beacons, for example to compensate for buggy APs that change the beacon count or quiet mode during CSA flow. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: fix position of vendor_data readLiad Kaufman
The ieee80211_vendor_radiotap was read from the beginning of the skb->data regardless of the existence of other elements in radiotap that would cause it to move to another position. Fix this by taking into account where it really should be. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22radiotap: add 0-length PSDU "not captured" typeJohannes Berg
This type was defined in radiotap but we didn't add it to the header file, add it now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: abort CSA if beacon does not include CSA IEsSara Sharon
In case we receive a beacon without CSA IE while we are in the middle of channel switch - abort the operation. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: support max channel switch time elementSara Sharon
2018 REVmd of the spec introduces the max channel switch time element which is optionally included in beacons/probes when there is a channel switch / extended channel switch element. The value represents the maximum delay between the time the AP transmitted the last beacon in current channel and the expected time of the first beacon in the new channel, in TU. Parse the value and pass it to the driver. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: Report Association Request frame IEs in association eventsJouni Malinen
This extends the NL80211_CMD_ASSOCIATE event case to report NL80211_ATTR_REQ_IE similarly to what is already done with the NL80211_CMD_CONNECT events if the driver provides this information. In practice, this adds (Re)Association Request frame information element reporting to mac80211 drivers for the cases where user space SME is used. This provides more information for user space to figure out which capabilities were negotiated for the association. For example, this can be used to determine whether HT, VHT, or HE is used. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: pmsr: use eth_broadcast_addr() to assign broadcast addressMao Wenan
This patch is to use eth_broadcast_addr() to assign broadcast address insetad of memset(). Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: Change default tx_sk_pacing_shift to 7Toke Høiland-Jørgensen
When we did the original tests for the optimal value of sk_pacing_shift, we came up with 6 ms of buffering as the default. Sadly, 6 is not a power of two, so when picking the shift value I erred on the size of less buffering and picked 4 ms instead of 8. This was probably wrong; those 2 ms of extra buffering makes a larger difference than I thought. So, change the default pacing shift to 7, which corresponds to 8 ms of buffering. The point of diminishing returns really kicks in after 8 ms, and so having this as a default should cut down on the need for extensive per-device testing and overrides needed in the drivers. Cc: stable@vger.kernel.org Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211_hwsim: propagate genlmsg_reply return codeLi RongQing
genlmsg_reply can fail, so propagate its return code Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22Merge branch 'pm-cpufreq-fixes'Rafael J. Wysocki
* pm-cpufreq-fixes: cpufreq: scmi: Fix use-after-free in scmi_cpufreq_exit()
2019-02-21rocker: Add missing break for PRE_BRIDGE_FLAGSFlorian Fainelli
A missing break keyword should have been added after adding support for PRE_BRIDGE_FLAGS. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 93700458ff63 ("rocker: Check Handle PORT_PRE_BRIDGE_FLAGS") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== code optimizations & bugfixes for HNS3 driver This patchset includes bugfixes and code optimizations for the HNS3 ethernet controller driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: clear command queue's registers when unloading VF driverHuazhong Tan
According to the hardware's description, the driver should clear the command queue's registers when uloading VF driver. Otherwise, these existing value may lead the IMP get into a wrong state. Fixes: fedd0c15d288 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: uninitialize command queue while unloading PF driverHuazhong Tan
According to the hardware's description, the driver should clear the command queue's registers when uloading driver. Otherwise, these existing value may lead the IMP get into a wrong state. Also this patch adds hclge_cmd_uninit() to do the command queue uninitialization which includes clearing registers and freeing memory. Fixes: 68c0a5c70614 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: Record VF vlan tablesliuzhongzhu
Record the vlan tables that the VF sends to the chip. After the VF exception, the PF actively clears the VF to chip config. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: Record VF unicast and multicast tablesliuzhongzhu
Record the unicast and multicast tables that the VF sends to the chip. After the VF exception, the PF actively clears the VF to chip config. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: fix 6th bit of ppp mpf abnormal errorsWeihang Li
This patch modify print message of 6th bit of ppp mpf abnormal errors, there is a extra letter e in it. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: enable 8~11th bit of mac common msi-x errorWeihang Li
These bits are enabled now and have been test. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: some bugfix of ppu(rcb) ras errorsWeihang Li
The 3rd and 4th of PPU(RCB) PF Abnormal is RAS errors instead of MSI-X like other bits. This patch adds process of handling and logging this two bits. Otherwise, this patch modifies print message of 28th and 29th bit of PPU MPF Abnormal errors, which keep same with other errors now. Fixes: f69b10b317f9 ("net: hns3: handle hw errors of PPU(RCB)") Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: modify print message of ssu common ecc errorsWeihang Li
This patch add information of specific bit in log to be consistent with other type of errors, so that we can know which memory of ssu has occurred a ecc ras errors. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: fix port info query issue for copper portJian Shen
In original codes, for copper port which doesn't connect to phy, it always returns -EOPNOTSUPP when query port information. This patch fixes it by return the port information of MAC. Fixes: 5f373b158523 ("net: hns3: Fix speed/duplex information loss problem when executing ethtool ethx cmd of VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: convert mac advertize and supported from u32 to link modeJian Shen
The link mode with bits has been up to more than 31 for some MAC and phy. Convert to using a linkmode bitmap, which can support all link modes. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: Check variable is valid before assigning it to anotherYonglong Liu
In hnae3_register_ae_dev(), ae_algo->ops is assigned to ae_dev->ops before check that ae_algo->ops is valid. And in hnae3_register_ae_algo(), missing check for ae_algo->ops. This patch fixes them. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: add pointer checking at the beginning of the exported functions.Yonglong Liu
These functions are exported, add pointer checking at the beginning can make them more safe. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21phonet: fix building with clangArnd Bergmann
clang warns about overflowing the data[] member in the struct pnpipehdr: net/phonet/pep.c:295:8: warning: array index 4 is past the end of the array (which contains 1 element) [-Warray-bounds] if (hdr->data[4] == PEP_IND_READY) ^ ~ include/net/phonet/pep.h:66:3: note: array 'data' declared here u8 data[1]; Using a flexible array member at the end of the struct avoids the warning, but since we cannot have a flexible array member inside of the union, each index now has to be moved back by one, which makes it a little uglier. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rémi Denis-Courmont <remi@remlab.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2019-02-21 1) Don't do TX bytes accounting for the esp trailer when sending from a request socket as this will result in an out of bounds memory write. From Martin Willi. 2) Destroy xfrm_state synchronously on net exit path to avoid nested gc flush callbacks that may trigger a warning in xfrm6_tunnel_net_exit(). From Cong Wang. 3) Do an unconditionally clone in pfkey_broadcast_one() to avoid a race when freeing the skb. From Sean Tranchetti. 4) Fix inbound traffic via XFRM interfaces across network namespaces. We did the lookup for interfaces and policies in the wrong namespace. From Tobias Brunner. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21Merge branch 'report-erspan-version-field-just-for-erspan-tunnels'David S. Miller
Lorenzo Bianconi says: ==================== report erspan version field just for erspan tunnels Do not report erspan_version to userpsace for non erspan tunnels. Report IFLA_GRE_ERSPAN_INDEX only for erspan version 1 in ip6gre_fill_info ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: ip6_gre: do not report erspan_ver for ip6gre or ip6gretapLorenzo Bianconi
Report erspan version field to userspace in ip6gre_fill_info just for erspan_v6 tunnels. Moreover report IFLA_GRE_ERSPAN_INDEX only for erspan version 1. The issue can be triggered with the following reproducer: $ip link add name gre6 type ip6gre local 2001::1 remote 2002::2 $ip link set gre6 up $ip -d link sh gre6 14: grep6@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1448 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/gre6 2001::1 peer 2002::2 promiscuity 0 minmtu 0 maxmtu 0 ip6gre remote 2002::2 local 2001::1 hoplimit 64 encaplimit 4 tclass 0x00 flowlabel 0x00000 erspan_index 0 erspan_ver 0 addrgenmode eui64 Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: ip_gre: do not report erspan_ver for gre or gretapLorenzo Bianconi
Report erspan version field to userspace in ipgre_fill_info just for erspan tunnels. The issue can be triggered with the following reproducer: $ip link add name gre1 type gre local 192.168.0.1 remote 192.168.1.1 $ip link set dev gre1 up $ip -d link sh gre1 13: gre1@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1476 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/gre 192.168.0.1 peer 192.168.1.1 promiscuity 0 minmtu 0 maxmtu 0 gre remote 192.168.1.1 local 192.168.0.1 ttl inherit erspan_ver 0 addrgenmode eui64 numtxqueues 1 numrxqueues 1 Fixes: f551c91de262 ("net: erspan: introduce erspan v2 for ip_gre") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21Merge branch 'mlxsw-Support-for-shared-buffers-in-Spectrum-2'David S. Miller
Ido Schimmel says: ==================== mlxsw: Support for shared buffers in Spectrum-2 Petr says: Spectrum-2 will be configured with a different set of pools than Spectrum-1, their sizes will be larger, and the individual quotas will be different as well. It is therefore necessary to make the shared buffer module aware of this dependence on chip type, and adjust the individual tables. In patch #1, introduce a structure for keeping per-chip immutable and default values. In patch #2, structures for keeping current values of SBPM and SBPR (pool configuration and port-pool quota) are allocated dynamically to support varying pool counts. In patches #3 to #7, uses of individual shared buffer configuration tables are migrated from global definitions to fields in struct mlxsw_sp_sb_vals, which was introduced above. Up until this point, the actual configuration is still the one suitable for Spectrum-1. In patch #8 Spectrum-2 configuration is added. In patch #9, port headroom configuration is changed to take into account current recommended value for a 100-Gbps port, and the split factor. In patch #10, requests for overlarge headroom are rejected. This avoids potential chip freeze should such overlarge requests be made. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Reject overlarge headroom size requestsPetr Machata
cap_max_headroom_size holds maximum headroom size supported. Overstepping that limit might under certain conditions lead to ASIC freeze. Query and store the value, and add mlxsw_sp_sb_max_headroom_cells() for obtaining the stored value. In __mlxsw_sp_port_headroom_set(), reject requests where the total port buffer is larger than the advertised maximum. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Update port headroom configurationPetr Machata
The recommendation for headroom size for 100Gbps port and 100m cable is 101.6KB, reduced accordingly for split ports. The closest higher number evenly divisible by cell size for both Spectrum-1 and Spectrum-2, and such that the number of cells can be further divided by maximum split factor of 4, is 102528 bytes, or 25632 bytes per lane. Update mlxsw_sp_port_pb_init() to compute the headroom taking into account this recommended per-lane value and number of lanes actually dedicated to a given port. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Add Spectrum-2 shared buffer configurationPetr Machata
Customize the tables related to shared buffer configuration to match the current recommendation for Spectrum-2 systems. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Keep mlxsw_sp_sb_mm in sb_valsPetr Machata
The SBMM register configures the shared buffer quota for MC packets according to Switch-Priority. The default configuration depends on the chip type. Therefore keep the table and length in struct mlxsw_sp_sb_vals. Redirect the references from the global definitions to the fields. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Keep mlxsw_sp_sb_cm in sb_valsPetr Machata
The SBCM register configures shared buffer quota according to port-priority resp. port-TC. The default configuration depends on the chip type. Therefore keep the tables and their lengths in struct mlxsw_sp_sb_vals. Redirect the references from the global definitions to the fields. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Keep mlxsw_sp_sb_prs in mlxsw_sp_sb_valsPetr Machata
The SBPR register configures shared buffer pools. The default configuration depends on the chip type. Therefore keep it in struct mlxsw_sp_sb_vals. Redirect the one reference from the global array to the field. Because the pool descriptor ID is implicit in the ordering of array members, both this array and the pool descriptor array have the same length. Therefore reuse mlxsw_sp_sb.pool_dess_len for the purpose of determining the length of SBPR array. Drop the now useless MLXSW_SP_SB_PRS_LEN. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Keep mlxsw_sp_sb_pms in mlxsw_sp_sb_valsPetr Machata
The SBPM register can be used to configure quotas for packets ingressing from a certain pool to a certain port, and egressing from a certain pool to a certain port. The default configuration depends on the chip type. Therefore keep it in struct mlxsw_sp_sb_vals. Redirect the one reference from the global array to the field. Because the pool descriptor ID is implicit in the ordering of array members, both this array and the pool descriptor array have the same length. Therefore reuse mlxsw_sp_sb.pool_dess_len for the purpose of determining the length of SBPM array. Drop the now useless MLXSW_SP_SB_PMS_LEN. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Keep pool descriptors in mlxsw_sp_sb_valsPetr Machata
Keep the table of pool descriptors and its length in struct mlxsw_sp_sb_vals so that it can be specialized per chip type. Redirect all users from the global definitions to the mlxsw_sp_sb fields. Give mlxsw_sp_pool_count() an extra mlxsw_sp parameter so that it can access the descriptor table. Drop the now unnecessary MLXSW_SP_SB_POOL_DESS_LEN. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Allocate prs & pms dynamicallyPetr Machata
Spectrum-2 will be configured with a different set of pools than Spectrum-1. The size of prs and pms buffers will therefore depend on the chip type of the device. Therefore, instead of reserving an array directly in a structure definition, allocate the buffer in mlxsw_sp_sb_port{,s}_init(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum: Add struct mlxsw_sp_sb_valsPetr Machata
Spectrum-2 will be configured with a different shared buffer configuration than Spectrum-1. Therefore introduce a structure for keeping the chip-specific default and immutable configuration. Configuration mutable in runtime will still be kept in struct mlxsw_sp_sb. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21Merge branch 'net-stmmac-Performance-improvements-in-Multi-Queue'David S. Miller
Jose Abreu says: ==================== net: stmmac: Performance improvements in Multi-Queue Tested in XGMAC2 and GMAC5. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: stmmac: dwxgmac2: Also use TBU interrupt to clean TX pathJose Abreu
TBU interrupt is a normal interrupt and can be used to trigger the cleaning of TX path. Lets check if it's active in DMA interrupt handler. While at it, refactor a little bit the function: - Don't check if RI is enabled because at function exit we will only clear the interrupts that are enabled so, no event will be missed. In my tests withe XGMAC2 this increased performance. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: stmmac: dwmac4: Also use TBU interrupt to clean TX pathJose Abreu
TBU interrupt is a normal interrupt and can be used to trigger the cleaning of TX path. Lets check if it's active in DMA interrupt handler. While at it, refactor a little bit the function: - Don't check if RI is enabled because at function exit we will only clear the interrupts that are enabled so, no event will be missed. In my tests with GMAC5 this increased performance. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: stmmac: Fix NAPI poll in TX path when in multi-queueJose Abreu
Commit 8fce33317023 introduced the concept of NAPI per-channel and independent cleaning of TX path. This is currently breaking performance in some cases. The scenario happens when all packets are being received in Queue 0 but the TX is performed in Queue != 0. Fix this by using different NAPI instances per each TX and RX queue, as suggested by Florian. Changes from v2: - Only force restart transmission if there are pending packets Changes from v1: - Pass entire ring size to TX clean path (Florian) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes A bit bigger than normal for this week due to fixes for some long standing display issues that are bound for stable. These changes would be going to stable anyway, so I figured it was better via 5.0 than 5.1. - Several display fixes - Fix PX systems due to core changes in runtime pm - Disable bulk moves. They are fixed in 5.1, but fix is too invasive for 5.0 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190220225715.3240-1-alexander.deucher@amd.com
2019-02-21Merge branch 'net-Get-rid-of-switchdev_port_attr_get'David S. Miller
Florian Fainelli says: ==================== net: Get rid of switchdev_port_attr_get() This patch series splits the removal of the switchdev_ops that was proposed a few times before and first tackles the easy part which is the removal of the single call to switchdev_port_attr_get() within the bridge code. As suggestd by Ido, this patch series adds a SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS which is used in the same context as the caller of switchdev_port_attr_set(), so not deferred, and then the operation is carried out in deferred context with setting a support bridge port flag. Follow-up patches will do the switchdev_ops removal after introducing the proper helpers for the switchdev blocking notifier to work across stacked devices (unlike the previous submissions). David this does depend on Russell's "[PATCH net-next v5 0/3] net: dsa: mv88e6xxx: fix IPv6". Changes in v3: - rebased against net-next/master after Russell's IPv6 changes to DSA - ignore prepare/commit phase for PRE_BRIDGE_FLAGS since we don't want to trigger the WARN() in net/switchdev/switchdev.c in the commit phase Changes in v2: - differentiate callers not supporting switchdev_port_attr_set() from the driver not being able to support specific bridge flags - pass "mask" instead of "flags" for the PRE_BRIDGE_FLAGS check - skip prepare phase for PRE_BRIDGE_FLAGS - corrected documentation a bit more - tested bridge_vlan_aware.sh with veth/VRF ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: Get rid of switchdev_port_attr_get()Florian Fainelli
With the bridge no longer calling switchdev_port_attr_get() to obtain the supported bridge port flags from a driver but instead trying to set the bridge port flags directly and relying on driver to reject unsupported configurations, we can effectively get rid of switchdev_port_attr_get() entirely since this was the only place where it was called. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: Remove SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORTFlorian Fainelli
Now that we have converted the bridge code and the drivers to check for bridge port(s) flags at the time we try to set them, there is no need for a get() -> set() sequence anymore and SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT therefore becomes unused. Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: bridge: Stop calling switchdev_port_attr_get()Florian Fainelli
Now that all switchdev drivers have been converted to check the SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS flags and report flags that they do not support accordingly, we can migrate the bridge code to try to set that attribute first, check the results and then do the actual setting. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21rocker: Check Handle PORT_PRE_BRIDGE_FLAGSFlorian Fainelli
In preparation for getting rid of switchdev_port_attr_get(), have rocker check for the bridge flags being set through switchdev_port_attr_set() with the SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS attribute identifier. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 23:32:51 +0000