summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-13Merge branch 'md-next' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.5/drivers Pull MD changes from Song. * 'md-next' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid10: prevent access of uninitialized resync_pages offset md: avoid invalid memory access for array sb->dev_roles md/raid1: avoid soft lockup under high load
2019-11-13net: cdc_ncm: Signedness bug in cdc_ncm_set_dgram_size()Dan Carpenter
This code is supposed to test for negative error codes and partial reads, but because sizeof() is size_t (unsigned) type then negative error codes are type promoted to high positive values and the condition doesn't work as expected. Fixes: 332f989a3b00 ("CDC-NCM: handle incomplete transfer of MTU") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13io_uring: Fix getting file for timeoutPavel Begunkov
For timeout requests io_uring tries to grab a file with specified fd, which is usually stdin/fd=0. Update io_op_needs_file() Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-13Merge tag 'gpio-v5.4-rc8-fixes-for-linus' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes gpio fixes for v5.4-rc8 - fix debounce times in max776520 and bd70528 - fix parallel build of gpio tools
2019-11-13gpiolib: acpi: Add Terra Pad 1061 to the run_edge_events_on_boot_blacklistHans de Goede
The Terra Pad 1061 has the usual micro-USB-B id-pin handler, but instead of controlling the actual micro-USB-B it turns the 5V boost for the tablet's USB-A connector and its keyboard-cover connector off. The actual micro-USB-B connector on the tablet is wired for charging only, and its id pin is *not* connected to the GPIO which is used for the (broken) id-pin event handler in the DSDT. While at it not only add a comment why the Terra Pad 1061 is on the blacklist, but also fix the missing comment for the Minix Neo Z83-4 entry. Fixes: 61f7f7c8f978 ("gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-13drm/i915/tgl: MOCS table updateMatt Roper
The bspec was just updated with a minor correction to entry 61 (it shouldn't have had the SCF bit set). v2: - Add a MOCS_ENTRY_UNUSED() and use it to declare the explicitly-reserved MOCS entries. (Lucas) - Move the warning suppression from the Makefile to a #pragma that only affects the TGL table. (Lucas) v3: - Entries 16 and 17 are identical to ICL now, so no need to explicitly adjust them (or mess with compiler warning overrides). Bspec: 45101 Fixes: 2ddf992179c4 ("drm/i915/tgl: Define MOCS entries for Tigerlake") Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Francisco Jerez <francisco.jerez.plata@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-2-matthew.d.roper@intel.com Reviewed-by: Francisco Jerez <currojerez@riseup.net> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> (cherry picked from commit bfb0e8e63d865559cc97af235aea583b7dcc235f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-13Revert "drm/i915/ehl: Update MOCS table for EHL"Matt Roper
This reverts commit f4071997f1de016780ec6b79c63d90cd5886ee83. These extra EHL entries won't behave as expected without a bit more work on the kernel side so let's drop them until that kernel work has had a chance to land. Userspace trying to use these new entries won't get the advantage of the new functionality these entries are meant to provide, but at least it won't misbehave. When we do add these back in the future, we'll probably want to explicitly use separate tables for ICL and EHL so that userspace software that mistakenly uses these entries (which are undefined on ICL) sees the same behavior it sees with all the other undefined entries. Cc: Francisco Jerez <francisco.jerez.plata@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: <stable@vger.kernel.org> # v5.3+ Fixes: f4071997f1de ("drm/i915/ehl: Update MOCS table for EHL") Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191112224757.25116-1-matthew.d.roper@intel.com Reviewed-by: Francisco Jerez <currojerez@riseup.net> (cherry picked from commit 046091758b50a5fff79726a31c1391614a3d84c8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-11-13io-wq: ensure we have a stable view of ->cur_work for cancellationsJens Axboe
worker->cur_work is currently protected by the lock of the wqe that the worker belongs to. When we send a signal to a worker, we need a stable view of ->cur_work, so we need to hold that lock. But this doesn't work so well, since we have the opposite order potentially on queueing work. If POLL_ADD is used with a signalfd, then io_poll_wake() is called with the signal lock, and that sometimes needs to insert work items. Add a specific worker lock that protects the current work item. Then we can guarantee that the task we're sending a signal is currently processing the exact work we think it is. Reported-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Fixes to the Synaptics RMI4 driver and fix for use after free in error path handling of the Cypress TTSP driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyttsp4_core - fix use after free bug Input: synaptics-rmi4 - clear IRQ enables for F54 Input: synaptics-rmi4 - remove unused result_bits mask Input: synaptics-rmi4 - do not consume more data than we have (F11, F12) Input: synaptics-rmi4 - disable the relative position IRQ in the F12 driver Input: synaptics-rmi4 - fix video buffer size
2019-11-13docs: fs-verity: mention statx() supportEric Biggers
Document that the statx() system call can now be used to check whether a file is a verity file. Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-11-13f2fs: support STATX_ATTR_VERITYEric Biggers
Set the STATX_ATTR_VERITY bit when the statx() system call is used on a verity file on f2fs. Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-11-13ext4: support STATX_ATTR_VERITYEric Biggers
Set the STATX_ATTR_VERITY bit when the statx() system call is used on a verity file on ext4. Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-11-13statx: define STATX_ATTR_VERITYEric Biggers
Add a statx attribute bit STATX_ATTR_VERITY which will be set if the file has fs-verity enabled. This is the statx() equivalent of FS_VERITY_FL which is returned by FS_IOC_GETFLAGS. This is useful because it allows applications to check whether a file is a verity file without opening it. Opening a verity file can be expensive because the fsverity_info is set up on open, which involves parsing metadata and optionally verifying a cryptographic signature. This is analogous to how various other bits are exposed through both FS_IOC_GETFLAGS and statx(), e.g. the encrypt bit. Reviewed-by: Andreas Dilger <adilger@dilger.ca> Acked-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-11-13docs: fs-verity: document first supported kernel versionEric Biggers
I had meant to replace these TODOs with the actual version when applying the patches, but forgot to do so. Do it now. Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-11-13slip: Fix memory leak in slip_open error pathJouni Hogander
Driver/net/can/slcan.c is derived from slip.c. Memory leak was detected by Syzkaller in slcan. Same issue exists in slip.c and this patch is addressing the leak in slip.c. Here is the slcan memory leak trace reported by Syzkaller: BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096): comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s) hex dump (first 32 bytes): 73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0.......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000a06eec0d>] __kmalloc+0x18b/0x2c0 [<0000000083306e66>] kvmalloc_node+0x3a/0xc0 [<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080 [<0000000061a996c9>] slcan_open+0x3ae/0x9a0 [<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0 [<0000000019289631>] tty_set_ldisc+0x28c/0x5f0 [<000000004de5a617>] tty_ioctl+0x48d/0x1590 [<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510 [<0000000059068dbc>] ksys_ioctl+0x99/0xb0 [<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0 [<0000000053d0332e>] do_syscall_64+0x16f/0x580 [<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000008ea75434>] 0xfffffffffffffff Cc: "David S. Miller" <davem@davemloft.net> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13Merge tag 'for-5.4-rc7-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "A fix for an older bug that has started to show up during testing (because of an updated test for rename exchange). It's an in-memory corruption caused by local variable leaking out of the function scope" * tag 'for-5.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix log context list corruption after rename exchange operation
2019-11-13net: usb: qmi_wwan: add support for Foxconn T77W968 LTE modulesAleksander Morgado
These are the Foxconn-branded variants of the Dell DW5821e modules, same USB layout as those. The QMI interface is exposed in USB configuration #1: P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13sbitmap: Delete sbitmap_any_bit_clear()John Garry
Since the only caller of this function has been deleted, delete this one also. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-13blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue()John Garry
These functions are not referenced, so delete them. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-13Merge tag 'linux-can-fixes-for-5.4-20191113' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-11-13 this is a pull request of 9 patches for net/master, hopefully for the v5.4 release cycle. All nine patches are by Oleksij Rempel and fix locking and use-after-free bugs in the j1939 stack found by the syzkaller syzbot. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2019-11-13 1) Fix a page memleak on xfrm state destroy. 2) Fix a refcount imbalance if a xfrm_state gets invaild during async resumption. From Xiaodong Xu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13io_wq: add get/put_work handlers to io_wq_create()Jens Axboe
For cancellation, we need to ensure that the work item stays valid for as long as ->cur_work is valid. Right now we can't safely dereference the work item even under the wqe->lock, because while the ->cur_work pointer will remain valid, the work could be completing and be freed in parallel. Only invoke ->get/put_work() on items we know that the caller queued themselves. Add IO_WQ_WORK_INTERNAL for io-wq to use, which is needed when we're queueing a flush item, for instance. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-13KVM: Forbid /dev/kvm being opened by a compat task when CONFIG_KVM_COMPAT=nMarc Zyngier
On a system without KVM_COMPAT, we prevent IOCTLs from being issued by a compat task. Although this prevents most silly things from happening, it can still confuse a 32bit userspace that is able to open the kvm device (the qemu test suite seems to be pretty mad with this behaviour). Take a more radical approach and return a -ENODEV to the compat task. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-13io_uring: check for validity of ->rings in teardownJens Axboe
Normally the rings are always valid, the exception is if we failed to allocate the rings at setup time. syzbot reports this: RSP: 002b:00007ffd6e8aa078 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441229 RDX: 0000000000000002 RSI: 0000000020000140 RDI: 0000000000000d0d RBP: 00007ffd6e8aa090 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffffff R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8903 Comm: syz-executor410 Not tainted 5.4.0-rc7-next-20191113 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline] RIP: 0010:__io_commit_cqring fs/io_uring.c:496 [inline] RIP: 0010:io_commit_cqring+0x1e1/0xdb0 fs/io_uring.c:592 Code: 03 0f 8e df 09 00 00 48 8b 45 d0 4c 8d a3 c0 00 00 00 4c 89 e2 48 c1 ea 03 44 8b b8 c0 01 00 00 48 b8 00 00 00 00 00 fc ff df <0f> b6 14 02 4c 89 e0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 61 RSP: 0018:ffff88808f51fc08 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff815abe4a RDX: 0000000000000018 RSI: ffffffff81d168d5 RDI: ffff8880a9166100 RBP: ffff88808f51fc70 R08: 0000000000000004 R09: ffffed1011ea3f7d R10: ffffed1011ea3f7c R11: 0000000000000003 R12: 00000000000000c0 R13: ffff8880a91661c0 R14: 1ffff1101522cc10 R15: 0000000000000000 FS: 0000000001e7a880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000140 CR3: 000000009a74c000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: io_cqring_overflow_flush+0x6b9/0xa90 fs/io_uring.c:673 io_ring_ctx_wait_and_kill+0x24f/0x7c0 fs/io_uring.c:4260 io_uring_create fs/io_uring.c:4600 [inline] io_uring_setup+0x1256/0x1cc0 fs/io_uring.c:4626 __do_sys_io_uring_setup fs/io_uring.c:4639 [inline] __se_sys_io_uring_setup fs/io_uring.c:4636 [inline] __x64_sys_io_uring_setup+0x54/0x80 fs/io_uring.c:4636 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441229 Code: e8 5c ae 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd6e8aa078 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441229 RDX: 0000000000000002 RSI: 0000000020000140 RDI: 0000000000000d0d RBP: 00007ffd6e8aa090 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffffff R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace b0f5b127a57f623f ]--- RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline] RIP: 0010:__io_commit_cqring fs/io_uring.c:496 [inline] RIP: 0010:io_commit_cqring+0x1e1/0xdb0 fs/io_uring.c:592 Code: 03 0f 8e df 09 00 00 48 8b 45 d0 4c 8d a3 c0 00 00 00 4c 89 e2 48 c1 ea 03 44 8b b8 c0 01 00 00 48 b8 00 00 00 00 00 fc ff df <0f> b6 14 02 4c 89 e0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 61 RSP: 0018:ffff88808f51fc08 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff815abe4a RDX: 0000000000000018 RSI: ffffffff81d168d5 RDI: ffff8880a9166100 RBP: ffff88808f51fc70 R08: 0000000000000004 R09: ffffed1011ea3f7d R10: ffffed1011ea3f7c R11: 0000000000000003 R12: 00000000000000c0 R13: ffff8880a91661c0 R14: 1ffff1101522cc10 R15: 0000000000000000 FS: 0000000001e7a880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000140 CR3: 000000009a74c000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 which is exactly the case of failing to allocate the SQ/CQ rings, and then entering shutdown. Check if the rings are valid before trying to access them at shutdown time. Reported-by: syzbot+21147d79607d724bd6f3@syzkaller.appspotmail.com Fixes: 1d7bb1d50fb4 ("io_uring: add support for backlogged CQ ring") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-13KVM: X86: Reset the three MSR list number variables to 0 in kvm_init_msr_list()Xiaoyao Li
When applying commit 7a5ee6edb42e ("KVM: X86: Fix initialization of MSR lists"), it forgot to reset the three MSR lists number varialbes to 0 while removing the useless conditionals. Fixes: 7a5ee6edb42e (KVM: X86: Fix initialization of MSR lists) Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-13selftests: kvm: fix build with glibc >= 2.30Vitaly Kuznetsov
Glibc-2.30 gained gettid() wrapper, selftests fail to compile: lib/assert.c:58:14: error: static declaration of ‘gettid’ follows non-static declaration 58 | static pid_t gettid(void) | ^~~~~~ In file included from /usr/include/unistd.h:1170, from include/test_util.h:18, from lib/assert.c:10: /usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here 34 | extern __pid_t gettid (void) __THROW; | ^~~~~~ Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-13kvm: x86: disable shattered huge page recovery for PREEMPT_RT.Paolo Bonzini
If a huge page is recovered (and becomes no executable) while another thread is executing it, the resulting contention on mmu_lock can cause latency spikes. Disabling recovery for PREEMPT_RT kernels fixes this issue. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-13drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.Yunhao Tian
The datasheet of V3s (and various other chips) wrote that TCON0_DCLK_DIV can be >= 1 if only dclk is used, and must >= 6 if dclk1 or dclk2 is used. As currently neither dclk1 nor dclk2 is used (no writes to these bits), let's set minimal division to 1. If this minimal division is 6, some common dot clock frequencies can't be produced (e.g. 30MHz will not be possible and will fallback to 25MHz), which is obviously not an expected behaviour. Signed-off-by: Yunhao Tian <t123yh@outlook.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/
2019-11-13tools: gpio: Correctly add make dependencies for gpio_utilsLaura Abbott
gpio tools fail to build correctly with make parallelization: $ make -s -j24 ld: gpio-utils.o: file not recognized: file truncated make[1]: *** [/home/labbott/linux_upstream/tools/build/Makefile.build:145: lsgpio-in.o] Error 1 make: *** [Makefile:43: lsgpio-in.o] Error 2 make: *** Waiting for unfinished jobs.... This is because gpio-utils.o is used across multiple targets. Fix this by making gpio-utios.o a proper dependency. Cc: <stable@vger.kernel.org> Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-11-13x86/resctrl: Fix potential lockdep warningXiaochen Shen
rdtgroup_cpus_write() and mkdir_rdt_prepare() call rdtgroup_kn_lock_live() -> kernfs_to_rdtgroup() to get 'rdtgrp', and then call the rdt_last_cmd_{clear,puts,...}() functions which will check if rdtgroup_mutex is held/requires its caller to hold rdtgroup_mutex. But if 'rdtgrp' returned from kernfs_to_rdtgroup() is NULL, rdtgroup_mutex is not held and calling rdt_last_cmd_{clear,puts,...}() will result in a self-incurred, potential lockdep warning. Remove the rdt_last_cmd_{clear,puts,...}() calls in these two paths. Just returning error should be sufficient to report to the user that the entry doesn't exist any more. [ bp: Massage. ] Fixes: 94457b36e8a5 ("x86/intel_rdt: Add diagnostics when writing the cpus file") Fixes: cfd0f34e4cd5 ("x86/intel_rdt: Add diagnostics when making directories") Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: pei.p.jia@intel.com Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1573079796-11713-1-git-send-email-xiaochen.shen@intel.com
2019-11-13scripts/tools-support-relr.sh: un-quote variablesIlie Halip
When the CC variable contains quotes, e.g. when using ccache (make CC="ccache <compiler>"), this script always fails, so CONFIG_RELR is never enabled, even when the toolchain supports this feature. Removing the /dev/null redirect and invoking the script manually shows the issue: $ CC='/usr/bin/ccache clang' ./scripts/tools-support-relr.sh ./scripts/tools-support-relr.sh: 7: ./scripts/tools-support-relr.sh: /usr/bin/ccache clang: not found Fix this by un-quoting the variables. Before: $ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \ NM=llvm-nm OBJCOPY=llvm-objcopy defconfig $ grep RELR .config CONFIG_ARCH_HAS_RELR=y With this change: $ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \ NM=llvm-nm OBJCOPY=llvm-objcopy defconfig $ grep RELR .config CONFIG_TOOLS_SUPPORT_RELR=y CONFIG_ARCH_HAS_RELR=y CONFIG_RELR=y Fixes: 5cf896fb6be3 ("arm64: Add support for relocating the kernel with RELR relocations") Reported-by: Dmitry Golovin <dima@golovin.in> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://github.com/ClangBuiltLinux/linux/issues/769 Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-13ALSA: pcm: Fix stream lock usage in snd_pcm_period_elapsed()paulhsia
If the nullity check for `substream->runtime` is outside of the lock region, it is possible to have a null runtime in the critical section if snd_pcm_detach_substream is called right before the lock. Signed-off-by: paulhsia <paulhsia@chromium.org> Link: https://lore.kernel.org/r/20191112171715.128727-2-paulhsia@chromium.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-13ALSA: usb-audio: not submit urb for stopped endpointHenry Lin
While output urb's snd_complete_urb() is executing, calling prepare_outbound_urb() may cause endpoint stopped before prepare_outbound_urb() returns and result in next urb submitted to stopped endpoint. usb-audio driver cannot re-use it afterwards as the urb is still hold by usb stack. This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again to let snd_complete_urb() know the endpoint already stopped and does not submit next urb. Below kind of error will be fixed: [ 213.153103] usb 1-2: timeout: still 1 active urbs on EP #1 [ 213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error Signed-off-by: Henry Lin <henryl@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191113021420.13377-1-henryl@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-13can: j1939: warn if resources are still linked on destroyOleksij Rempel
j1939_session_destroy() and __j1939_priv_release() should be called only if session, ecu or socket are not linked or used by any one else. If at least one of these resources is linked, then the reference counting is broken somewhere. This warning will be triggered before KASAN will do, and will make it easier to debug initial issue. This works on platforms without KASAN support. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: j1939_can_recv(): add priv refcountingOleksij Rempel
j1939_can_recv() can be called in parallel with socket release. In this case sk_release and sk_destruct can be done earlier than j1939_can_recv() is processed. Reported-by: syzbot+ca172a0ac477ac90f045@syzkaller.appspotmail.com Reported-by: syzbot+07ca5bce8530070a5650@syzkaller.appspotmail.com Reported-by: syzbot+a47537d3964ef6c874e1@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: transport: j1939_cancel_active_session(): use ↵Oleksij Rempel
hrtimer_try_to_cancel() instead of hrtimer_cancel() This part of the code protected by lock used in the hrtimer as well. Using hrtimer_cancel() will trigger dead lock. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: make sure socket is held as long as session existsOleksij Rempel
We link the socket to the session to be able provide socket specific notifications. For example messages over error queue. We need to keep the socket held, while we have a reference to it. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: transport: make sure the aborted session will be deactivated ↵Oleksij Rempel
only once j1939_session_cancel() was modifying session->state without protecting it by locks and without checking actual state of the session. This patch moves j1939_tp_set_rxtimeout() into j1939_session_cancel() and adds the missing locking. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: socket: rework socket locking for j1939_sk_release() and ↵Oleksij Rempel
j1939_sk_sendmsg() j1939_sk_sendmsg() should be protected by lock_sock() to avoid race with j1939_sk_bind() and j1939_sk_release(). Reported-by: syzbot+afd421337a736d6c1ee6@syzkaller.appspotmail.com Reported-by: syzbot+6d04f6a1b31a0ae12ca9@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: main: j1939_ndev_to_priv(): avoid crash if can_ml_priv is NULLOleksij Rempel
This patch avoids a NULL pointer deref crash if ndev->ml_priv is NULL. Reported-by: syzbot+95c8e0d9dffde15b6c5c@syzkaller.appspotmail.com Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: j1939: move j1939_priv_put() into sk_destruct callbackOleksij Rempel
This patch delays the j1939_priv_put() until the socket is destroyed via the sk_destruct callback, to avoid use-after-free problems. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13can: af_can: export can_sock_destruct()Oleksij Rempel
In j1939 we need our own struct sock::sk_destruct callback. Export the generic af_can can_sock_destruct() that allows us to chain-call it. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
2019-11-13perf/core: Fix missing static inline on perf_cgroup_switch()Ben Dooks (Codethink)
It looks like a "static inline" has been missed in front of the empty definition of perf_cgroup_switch() under certain configurations. Fixes the following sparse warning: kernel/events/core.c:1035:1: warning: symbol 'perf_cgroup_switch' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20191106132527.19977-1-ben.dooks@codethink.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13perf/core: Consistently fail fork on allocation failuresAlexander Shishkin
Commit: 313ccb9615948 ("perf: Allocate context task_ctx_data for child event") makes the inherit path skip over the current event in case of task_ctx_data allocation failure. This, however, is inconsistent with allocation failures in perf_event_alloc(), which would abort the fork. Correct this by returning an error code on task_ctx_data allocation failure and failing the fork in that case. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20191105075702.60319-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13perf/aux: Disallow aux_output for kernel eventsAlexander Shishkin
Commit ab43762ef0109 ("perf: Allow normal events to output AUX data") added 'aux_output' bit to the attribute structure, which relies on AUX events and grouping, neither of which is supported for the kernel events. This notwithstanding, attempts have been made to use it in the kernel code, suggesting the necessity of an explicit hard -EINVAL. Fix this by rejecting attributes with aux_output set for kernel events. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20191030134731.5437-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13perf/core: Reattach a misplaced commentAlexander Shishkin
A comment is in a wrong place in perf_event_create_kernel_counter(). Fix that. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20191030134731.5437-2-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13perf/aux: Fix the aux_output group inheritance fixAlexander Shishkin
Commit f733c6b508bc ("perf/core: Fix inheritance of aux_output groups") adds a NULL pointer dereference in case inherit_group() races with perf_release(), which causes the below crash: > BUG: kernel NULL pointer dereference, address: 000000000000010b > #PF: supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > PGD 3b203b067 P4D 3b203b067 PUD 3b2040067 PMD 0 > Oops: 0000 [#1] SMP KASAN > CPU: 0 PID: 315 Comm: exclusive-group Tainted: G B 5.4.0-rc3-00181-g72e1839403cb-dirty #878 > RIP: 0010:perf_get_aux_event+0x86/0x270 > Call Trace: > ? __perf_read_group_add+0x3b0/0x3b0 > ? __kasan_check_write+0x14/0x20 > ? __perf_event_init_context+0x154/0x170 > inherit_task_group.isra.0.part.0+0x14b/0x170 > perf_event_init_task+0x296/0x4b0 Fix this by skipping over events that are getting closed, in the inheritance path. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: f733c6b508bc ("perf/core: Fix inheritance of aux_output groups") Link: https://lkml.kernel.org/r/20191101151248.47327-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13perf/core: Disallow uncore-cgroup eventsPeter Zijlstra
While discussing uncore event scheduling, I noticed we do not in fact seem to dis-allow making uncore-cgroup events. Such events make no sense what so ever because the cgroup is a CPU local state where uncore counts across a number of CPUs. Disallow them. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13sched/pelt: Fix update of blocked PELT orderingVincent Guittot
update_cfs_rq_load_avg() can call cpufreq_update_util() to trigger an update of the frequency. Make sure that RT, DL and IRQ PELT signals have been updated before calling cpufreq. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: dsmythies@telus.net Cc: juri.lelli@redhat.com Cc: mgorman@suse.de Cc: rostedt@goodmis.org Fixes: 371bf4273269 ("sched/rt: Add rt_rq utilization tracking") Fixes: 3727e0e16340 ("sched/dl: Add dl_rq utilization tracking") Fixes: 91c27493e78d ("sched/irq: Add IRQ utilization tracking") Link: https://lkml.kernel.org/r/1572434309-32512-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-13sched/core: Avoid spurious lock dependenciesPeter Zijlstra
While seemingly harmless, __sched_fork() does hrtimer_init(), which, when DEBUG_OBJETS, can end up doing allocations. This then results in the following lock order: rq->lock zone->lock.rlock batched_entropy_u64.lock Which in turn causes deadlocks when we do wakeups while holding that batched_entropy lock -- as the random code does. Solve this by moving __sched_fork() out from under rq->lock. This is safe because nothing there relies on rq->lock, as also evident from the other __sched_fork() callsite. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Cc: bigeasy@linutronix.de Cc: cl@linux.com Cc: keescook@chromium.org Cc: penberg@kernel.org Cc: rientjes@google.com Cc: thgarnie@google.com Cc: tytso@mit.edu Cc: will@kernel.org Fixes: b7d5dc21072c ("random: add a spinlock_t to struct batched_entropy") Link: https://lkml.kernel.org/r/20191001091837.GK4536@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-28 10:44:20 +0000