| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management fixes from Zhang Rui:
- Fix a race condition that sysfs could be accessed before necessary
initialization in int340x thermal driver. (Aaron Hill)
- Fix a NULL vs IS_ERR() check in int340x thermal driver. (Dan
Carpenter)
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
drivers: thermal: int340x_thermal: Fix sysfs race condition
thermal: int340x_thermal: Fix a NULL vs IS_ERR() check
|
|
memcpy_fromio() doesn't provide any control over access size. For example,
on arm64, it is implemented using readb and readq. This may trigger a
synchronous external abort:
[ 3.729943] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
[ 3.737000] Modules linked in:
[ 3.744371] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G S 4.20.0-rc4 #16
[ 3.747413] Hardware name: Qualcomm Technologies, Inc. MSM8998 v1 MTP (DT)
[ 3.755295] pstate: 00000005 (nzcv daif -PAN -UAO)
[ 3.761978] pc : __memcpy_fromio+0x68/0x80
[ 3.766718] lr : ufshcd_dump_regs+0x50/0xb0
[ 3.770767] sp : ffff00000807ba00
[ 3.774830] x29: ffff00000807ba00 x28: 00000000fffffffb
[ 3.778344] x27: ffff0000089db068 x26: ffff8000f6e58000
[ 3.783728] x25: 000000000000000e x24: 0000000000000800
[ 3.789023] x23: ffff8000f6e587c8 x22: 0000000000000800
[ 3.794319] x21: ffff000008908368 x20: ffff8000f6e1ab80
[ 3.799615] x19: 000000000000006c x18: ffffffffffffffff
[ 3.804910] x17: 0000000000000000 x16: 0000000000000000
[ 3.810206] x15: ffff000009199648 x14: ffff000089244187
[ 3.815502] x13: ffff000009244195 x12: ffff0000091ab000
[ 3.820797] x11: 0000000005f5e0ff x10: ffff0000091998a0
[ 3.826093] x9 : 0000000000000000 x8 : ffff8000f6e1ac00
[ 3.831389] x7 : 0000000000000000 x6 : 0000000000000068
[ 3.836676] x5 : ffff8000f6e1abe8 x4 : 0000000000000000
[ 3.841971] x3 : ffff00000928c868 x2 : ffff8000f6e1abec
[ 3.847267] x1 : ffff00000928c868 x0 : ffff8000f6e1abe8
[ 3.852567] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____))
[ 3.857900] Call trace:
[ 3.864473] __memcpy_fromio+0x68/0x80
[ 3.866683] ufs_qcom_dump_dbg_regs+0x1c0/0x370
[ 3.870522] ufshcd_print_host_regs+0x168/0x190
[ 3.874946] ufshcd_init+0xd4c/0xde0
[ 3.879459] ufshcd_pltfrm_init+0x3c8/0x550
[ 3.883264] ufs_qcom_probe+0x24/0x60
[ 3.887188] platform_drv_probe+0x50/0xa0
Assuming aligned 32-bit registers, let's use readl, after making sure
that 'offset' and 'len' are indeed multiples of 4.
Fixes: ba80917d9932d ("scsi: ufs: ufshcd_dump_regs to use memcpy_fromio")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes: a94a2572b977 ("scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mike Christie <mchristi@redhat.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The connect_local_phy should return NULL (not negative errno) on
error, since its caller expects it.
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Assign fc_vport to ln->fc_vport before calling csio_fcoe_alloc_vnp() to
avoid a NULL pointer dereference in csio_vport_set_state().
ln->fc_vport is dereferenced in csio_vport_set_state().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We cannot wait on a completion object in the lpfc_nvme_targetport structure
in the _destroy_targetport() code path because the NVMe/fc transport will
free that structure immediately after the .targetport_delete() callback.
This results in a use-after-free, and a hang if slub_debug=FZPU is enabled.
Fix this by putting the completion on the stack.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We cannot wait on a completion object in the lpfc_nvme_lport structure in
the _destroy_localport() code path because the NVMe/fc transport will free
that structure immediately after the .localport_delete() callback. This
results in a use-after-free, and a hang if slub_debug=FZPU is enabled.
Fix this by putting the completion on the stack.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a host driver sets a maximum segment size we should not only propagate
that setting to the block layer, which can merge segments, but also to the
DMA mapping layer which can merge segments as well.
Fixes: 50c2e9107f ("scsi: introduce a max_segment_size host_template parameters")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Converted to use "imply" instead of "select" for PTP_1588_CLOCK
driver selecting. This could break the hard dependency between
the PTP clock subsystem and ethernet drivers.
This patch also set "default y" for dpaa2 ptp driver building to
provide user an available ptp clock in default.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Michal Kalderon says:
====================
qed*: Error recovery process
Parity errors might happen in the device's memories due to momentary bit
flips which are caused by radiation.
Errors that are not correctable initiate a process kill event, which blocks
the device access towards the host and the network, and a recovery process
is started in the management FW and in the driver.
This series adds the support of this process in the qed core module and in
the qede driver (patches 2 & 3).
Patch 1 in the series revises the load sequence, to avoid PCI errors that
might be observed during a recovery process.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the error recovery process in the qede driver.
The process includes a partial/customized driver unload and load, which
allows it to look like a short suspend period to the kernel while
preserving the net devices' state.
Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the detection and handling of a parity error ("process kill
event"), including the update of the protocol drivers, and the prevention
of any HW access that will lead to device access towards the host while
recovery is in progress.
It also provides the means for the protocol drivers to trigger a recovery
process on their decision.
Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initiating final cleanup after an ungraceful driver unload can lead to bad
PCI accesses towards the host.
This patch revises the load sequence so final cleanup is sent while the
internal master enable is cleared, to prevent the host accesses, and clears
the internal error indications just before enabling the internal master
enable.
Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in6_dump_addrs() returns a positive 1 if there was nothing to dump.
This return value can not be passed as return from inet6_dump_addr()
as is, because it will confuse rtnetlink, resulting in NLMSG_DONE
never getting set:
$ ip addr list dev lo
EOF on netlink
Dump terminated
v2: flip condition to avoid a new goto (DaveA)
Fixes: 7c1e8a3817c5 ("netlink: fixup regression in RTM_GETADDR")
Reported-by: Brendan Galloway <brendan.galloway@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"This is a sort of random collection of clk fixes that have come in
since the merge window:
- Handful of memory allocation and potentially bad pointer usage
fixes
- JSON format was incorrect for clk_dump because it missed a comma
- Two Kconfig fixes, one duplicate and one missing select line
- Compiler warning fix for the VC5 clk driver
- Name and rate fixes for PLLs in the stratix10 driver so it can
properly detect PLL rates and parents"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: socfpga: stratix10: fix naming convention for the fixed-clocks
clk: socfpga: stratix10: fix rate calculation for pll clocks
clk: qcom: Select QCOM_GDSC with MSM_GCC_8998
clk: vc5: Abort clock configuration without upstream clock
clk: sysfs: fix invalid JSON in clk_dump
clk: imx: Remove Kconfig duplicate include
clk: zynqmp: Fix memory allocation in zynqmp_clk_setup
clk: tegra: dfll: Fix a potential Oop in remove()
clk: imx: fix potential NULL dereference in imx8qxp_lpcg_clk_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to rtc, seccomp and other tests"
* tag 'linux-kselftest-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/seccomp: Abort without user notification support
selftests: gpio-mockup-chardev: Check asprintf() for error
selftests: seccomp: use LDLIBS instead of LDFLAGS
selftests/vm/gup_benchmark.c: match gup struct to kernel
tools/testing/selftests/x86/unwind_vdso.c: Remove duplicate header
x86/mpx/selftests: fix spelling mistake "succeded" -> "succeeded"
selftests: rtc: rtctest: add alarm test on minute boundary
selftests: rtc: rtctest: fix alarm tests
|
|
sync_inodes_sb() can race against cgwb (cgroup writeback) membership
switches and fail to writeback some inodes. For example, if an inode
switches to another wb while sync_inodes_sb() is in progress, the new
wb might not be visible to bdi_split_work_to_wbs() at all or the inode
might jump from a wb which hasn't issued writebacks yet to one which
already has.
This patch adds backing_dev_info->wb_switch_rwsem to synchronize cgwb
switch path against sync_inodes_sb() so that sync_inodes_sb() is
guaranteed to see all the target wbs and inodes can't jump wbs to
escape syncing.
v2: Fixed misplaced rwsem init. Spotted by Jiufei.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jiufei Xue <xuejiufei@gmail.com>
Link: http://lkml.kernel.org/r/dc694ae2-f07f-61e1-7097-7c8411cee12d@gmail.com
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use ERSPAN key header field as tunnel key in gre_parse_header routine
since ERSPAN protocol sets the key field of the external GRE header to
0 resulting in a tunnel lookup fail in ip6gre_err.
In addition remove key field parsing and pskb_may_pull check in
erspan_rcv and ip6erspan_rcv
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The recent addition of SPDX license identifiers to the files in
drivers/net/ethernet/sun created a licensing conflict.
The cassini driver files contain a proper license notice:
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
but the SPDX change added:
SPDX-License-Identifier: GPL-2.0
So the file got tagged GPL v2 only while in fact it is licensed under GPL
v2 or later.
It's nice that people care about the SPDX tags, but they need to be more
careful about it. Not everything under (the) sun belongs to ...
Fix up the SPDX identifier and remove the boiler plate text as it is
redundant.
Fixes: c861ef83d771 ("sun: Add SPDX license tags to Sun network drivers")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Shannon Nelson <shannon.nelson@oracle.com>
Cc: Zhu Yanjun <yanjun.zhu@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Shannon Nelson <shannon.lee.nelson@gmail.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Provides useful context about bio splits in blktrace.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Otherwise targets that don't support/expect IO splitting could resubmit
bios using code paths with unnecessary IO splitting complexity.
Depends-on: 24113d487843 ("dm: avoid indirect call in __dm_make_request")
Fixes: 978e51ba38e00 ("dm: optimize bio-based NVMe IO submission")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- descriptor parsing regression fix for devices that have more than 16
collections, from Peter Hutterer (and followup cleanup from Philipp
Zabel)
- quirk for Goodix touchpad
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: core: simplify active collection tracking
HID: i2c-hid: Disable runtime PM on Goodix touchpad
HID: core: replace the collection tree pointers with indices
|
|
The recently added nvlink2 VFIO driver introduced a license conflict in two
files. In both cases the SPDX license identifier is:
SPDX-License-Identifier: GPL-2.0+
but the files contain also the following license boiler plate text:
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation
The latter is GPL-2.9-only and not GPL-2.0=.
Looking deeper. The nvlink source file is derived from vfio_pci_igd.c which
is also licensed under GPL-2.0-only and it can be assumed that the file was
copied and modified. As the original file is licensed GPL-2.0-only it's not
possible to relicense derivative work to GPL-2.0-or-later.
Fix the SPDX identifier and remove the boiler plate as it is redundant.
Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: kvm@vger.kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Except for blk_queue_split(), bio_split() is used for splitting bio too,
then the remained bio is often resubmit to queue via generic_make_request().
So the same queue enter recursion exits in this case too. Unfortunatley
commit cd4a4ae4683dc2 doesn't help this case.
This patch covers the above case by setting BIO_QUEUE_ENTERED before calling
q->make_request_fn.
In theory the per-bio flag is used to simulate one stack variable, it is
just fine to clear it after q->make_request_fn is returned. Especially
the same bio can't be submitted from another context.
Fixes: cd4a4ae4683dc2 ("block: don't use blocking queue entered for recursive bio submits")
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: NeilBrown <neilb@suse.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After commit
5d32a66541c4 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
dependencies on CONFIG_PCI that previously were satisfied implicitly
through dependencies on CONFIG_ACPI have to be specified directly.
PCI_LOCKLESS_CONFIG depends on PCI but this dependency has not been
mentioned in the Kconfig so add an explicit dependency here and fix
WARNING: unmet direct dependencies detected for PCI_LOCKLESS_CONFIG
Depends on [n]: PCI [=n]
Selected by [y]:
- X86 [=y]
Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190121231958.28255-2-okaya@kernel.org
|
|
On a DIO_SKIP_HOLES filesystem, the ->get_block() method is currently
not allowed to create blocks for an empty inode. This confusion comes
from trying to bit shift a negative number, so check the size of the
inode first.
The problem is most visible for hfsplus, because the fallback to
buffered I/O doesn't happen and the write fails with EIO. This is in
part the fault of the module, because it gives a wrong return value on
->get_block(); that will be fixed in a separate patch.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
- Move SoC config options (moved in commit 062887bf5ef73313 ("ARM:
shmobile: Move SoC Kconfig symbols to drivers/soc/renesas/")),
- Move PCI config options (moved in commit eb01d42a77785ff9 ("PCI:
consolidate PCI config entry in drivers/pci")),
- Drop CONFIG_I2C_MUX=y (auto-enabled since commit ea6b13e9fed0fda9
("drm/bridge/sii902x: Add missing dependency on I2C_MUX")),
- Drop CONFIG_SH_DMAE=y (no longer selectable since commit
a19788612f51b787 ("dmaengine: sh: Remove R-Mobile APE6 support")),
- Drop CONFIG_ARM_UNWIND (auto-enabled since commit f9b58e8c7d031b0d
("ARM: 8800/1: use choice for kernel unwinders")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Fix a cut'n'paste typo.
Checking 'master->sysclk' is expected here.
Fixes: 603f2bee2c54 ("i3c: master: Add driver for Cadence IP")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a previous commit we switched from a d_alloc_name() + d_lookup()
combination to setup a new dentry and find potential duplicates to the more
idiomatic lookup_one_len(). As far as I understand, this also means we need
to switch from d_add() to d_instantiate() since lookup_one_len() will
create a new dentry when it doesn't find an existing one and add the new
dentry to the hash queues. So we only need to call d_instantiate() to
connect the dentry to the inode and turn it into a positive dentry.
If we were to use d_add() we sure see stack traces like the following
indicating that adding the same dentry twice over the same inode:
[ 744.441889] CPU: 4 PID: 2849 Comm: landscape-sysin Not tainted 5.0.0-rc1-brauner-binderfs #243
[ 744.441889] Hardware name: Dell DCS XS24-SC2 /XS24-SC2 , BIOS S59_3C20 04/07/2011
[ 744.441889] RIP: 0010:__d_lookup_rcu+0x76/0x190
[ 744.441889] Code: 89 75 c0 49 c1 e9 20 49 89 fd 45 89 ce 41 83 e6 07 42 8d 04 f5 00 00 00 00 89 45 c8 eb 0c 48 8b 1b 48 85 db 0f 84 81 00 00 00 <44> 8b 63 fc 4c 3b 6b 10 75 ea 48 83 7b 08 00 74 e3 41 83 e4 fe 41
[ 744.441889] RSP: 0018:ffffb8c984e27ad0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
[ 744.441889] RAX: 0000000000000038 RBX: ffff9407ef770c08 RCX: ffffb8c980011000
[ 744.441889] RDX: ffffb8c984e27b54 RSI: ffffb8c984e27ce0 RDI: ffff9407e6689600
[ 744.441889] RBP: ffffb8c984e27b28 R08: ffffb8c984e27ba4 R09: 0000000000000007
[ 744.441889] R10: ffff9407e5c4f05c R11: 973f3eb9d84a94e5 R12: 0000000000000002
[ 744.441889] R13: ffff9407e6689600 R14: 0000000000000007 R15: 00000007bfef7a13
[ 744.441889] FS: 00007f0db13bb740(0000) GS:ffff9407f3b00000(0000) knlGS:0000000000000000
[ 744.441889] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 744.441889] CR2: 00007f0dacc51024 CR3: 000000032961a000 CR4: 00000000000006e0
[ 744.441889] Call Trace:
[ 744.441889] lookup_fast+0x53/0x300
[ 744.441889] walk_component+0x49/0x350
[ 744.441889] ? inode_permission+0x63/0x1a0
[ 744.441889] link_path_walk.part.33+0x1bc/0x5a0
[ 744.441889] ? path_init+0x190/0x310
[ 744.441889] path_lookupat+0x95/0x210
[ 744.441889] filename_lookup+0xb6/0x190
[ 744.441889] ? __check_object_size+0xb8/0x1b0
[ 744.441889] ? strncpy_from_user+0x50/0x1a0
[ 744.441889] user_path_at_empty+0x36/0x40
[ 744.441889] ? user_path_at_empty+0x36/0x40
[ 744.441889] vfs_statx+0x76/0xe0
[ 744.441889] __do_sys_newstat+0x3d/0x70
[ 744.441889] __x64_sys_newstat+0x16/0x20
[ 744.441889] do_syscall_64+0x5a/0x120
[ 744.441889] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 744.441889] RIP: 0033:0x7f0db0ec2775
[ 744.441889] Code: 00 00 00 75 05 48 83 c4 18 c3 e8 26 55 02 00 66 0f 1f 44 00 00 83 ff 01 48 89 f0 77 30 48 89 c7 48 89 d6 b8 04 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 03 f3 c3 90 48 8b 15 e1 b6 2d 00 f7 d8 64 89
[ 744.441889] RSP: 002b:00007ffc36bc9388 EFLAGS: 00000246 ORIG_RAX: 0000000000000004
[ 744.441889] RAX: ffffffffffffffda RBX: 00007ffc36bc9300 RCX: 00007f0db0ec2775
[ 744.441889] RDX: 00007ffc36bc9400 RSI: 00007ffc36bc9400 RDI: 00007f0dad26f050
[ 744.441889] RBP: 0000000000c0bc60 R08: 0000000000000000 R09: 0000000000000001
[ 744.441889] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc36bc9400
[ 744.441889] R13: 0000000000000001 R14: 00000000ffffff9c R15: 0000000000c0bc60
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The binderfs_binder_ctl_create() call is a no-op on subsequent calls and
the first call is done before we unlock the suberblock. Hence, there is no
need to take inode_lock() in there. Let's remove it.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Al pointed out that first calling kill_litter_super() before cleaning up
info is more correct since destroying info doesn't depend on the state of
the dentries and inodes. That the opposite remains true is not guaranteed.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- switch from d_alloc_name() + d_lookup() to lookup_one_len():
Instead of using d_alloc_name() and then doing a d_lookup() with the
allocated dentry to find whether a device with the name we're trying to
create already exists switch to using lookup_one_len(). The latter will
either return the existing dentry or a new one.
- switch from kmalloc() + strscpy() to kmemdup():
Use a more idiomatic way to copy the name for the new dentry that
userspace gave us.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Al pointed out that on binderfs_fill_super() error
deactivate_locked_super() will call binderfs_kill_super() so all of the
freeing and putting we currently do in binderfs_fill_super() is unnecessary
and buggy. Let's simply return errors and let binderfs_fill_super() take
care of cleaning up on error.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- make binderfs control dentry immutable:
We don't allow to unlink it since it is crucial for binderfs to be
useable but if we allow to rename it we make the unlink trivial to
bypass. So prevent renaming too and simply treat the control dentry as
immutable.
- add is_binderfs_control_device() helper:
Take the opportunity and turn the check for the control dentry into a
separate helper is_binderfs_control_device() since it's now used in two
places.
- simplify binderfs_rename():
Instead of hand-rolling our custom version of simple_rename() just dumb
the whole function down to first check whether we're trying to rename the
control dentry. If we do EPERM the caller and if not call simple_rename().
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The comment stems from an early version of that patchset and is just
confusing now.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We allow more then 255 binderfs binder devices to be created since there
are workloads that require more than that. If we use __u8 we'll overflow
after 255. So let's use a __u32.
Note that there's no released kernel with binderfs out there so this is
not a regression.
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When we switched over from binder_ctl.h to binderfs.h we forgot to change
the include guards. It's minor but it's obviously correct.
Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Often userspace doesn't know when the kernel will be calling dma_buf_detach
on the buffer.
If userpace starts its CPU access at the same time as the sg list is being
freed it could end up accessing the sg list after it has been freed.
Thread A Thread B
- DMA_BUF_IOCTL_SYNC IOCT
- ion_dma_buf_begin_cpu_access
- list_for_each_entry
- ion_dma_buf_detatch
- free_duped_table
- dma_sync_sg_for_cpu
Fix this by getting the ion_buffer lock before freeing the sg table memory.
Fixes: 2a55e7b5e544 ("staging: android: ion: Call dma_map_sg for syncing and mapping")
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit cbffaf7aa09e ("can: flexcan: Always use last mailbox for TX")
introduced a loop letting i run up to (including) ARRAY_SIZE(regs->mb)
and in the body accessed regs->mb[i] which is an out-of-bounds array
access that then resulted in an access to an reserved register area.
Later this was changed by commit 0517961ccdf1 ("can: flexcan: Add
provision for variable payload size") to iterate a bit differently but
still runs one iteration too much resulting to call
flexcan_get_mb(priv, priv->mb_count)
which results in a WARN_ON and then a NULL pointer exception. This
only affects devices compatible with "fsl,p1010-flexcan",
"fsl,imx53-flexcan", "fsl,imx35-flexcan", "fsl,imx25-flexcan",
"fsl,imx28-flexcan", so newer i.MX SoCs are not affected.
Fixes: cbffaf7aa09e ("can: flexcan: Always use last mailbox for TX")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org> # >= 4.20
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Fix a static code checker warning:
drivers/net/can/flexcan.c:1435 flexcan_setup_stop_mode() warn: passing zero to 'PTR_ERR'
Fixes: de3578c198c6 ("can: flexcan: add self wakeup support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Kyungtae Kim detected a potential integer overflow in bcm_[rx|tx]_setup()
when the conversion into ktime multiplies the given value with NSEC_PER_USEC
(1000).
Reference: https://marc.info/?l=linux-can&m=154732118819828&w=2
Add a check for the given tv_usec, so that the value stays below one second.
Additionally limit the tv_sec value to a reasonable value for CAN related
use-cases of 400 days and ensure all values to be positive.
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org> # >= 2.6.26
Tested-by: Kyungtae Kim <kt0755@gmail.com>
Acked-by: Andre Naujoks <nautsch2@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
removing it
This patch revert commit 7da11ba5c506
("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb")
After introduction of this change we encountered following new error
message on various i.MX plattforms (flexcan):
| flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non
| existing skb: can_priv::echo_skb[0]
The introduction of the message was a mistake because
priv->echo_skb[idx] = NULL is a perfectly valid in following case: If
CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type
of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In
this case can_put_echo_skb will not set priv->echo_skb[idx]. It is
therefore kept NULL.
As additional argument for revert: The order of check and usage of idx
was changed. idx is used to access an array element before checking it's
boundaries.
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Fixes: 7da11ba5c506 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Although TMDS clock is required for HDMI to properly function,
nobody called clk_prepare_enable(). This fixes reference counting
issues and makes sure clock is running when it needs to be running.
Due to TDMS clock being parent clock for DDC clock, TDMS clock
was turned on/off for each EDID probe, causing spurious failures
for certain HDMI/DVI screens.
Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Signed-off-by: Priit Laes <priit.laes@paf.com>
[Maxime: Moved the TMDS clock enable earlier]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122073232.7240-1-plaes@plaes.org
|
|
Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4.
Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp>
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The geni set/get_mctrl() functions currently do nothing unless
hardware flow control is enabled. Remove this arbitrary limitation.
Suggested-by: Johan Hovold <johan@kernel.org>
Fixes: 8a8a66a1a18a ("tty: serial: qcom_geni_serial: Add support for flow control")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SPDX license identifier and the boiler plate text are
contradicting. Only the SPDX license identifier is needed. The
other one is removed.
Fixes: 86958dcc5ad7 ("mmc: dw_mmc-bluefield: Add driver extension")
Cc: stable@vger.kernel.org
Reviewed-by: David Woods <dwoods@mellanox.com>
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
card detection fails on "BeeLink Mini M8 SII" if enabled too early
mmc1: error -110 whilst initialising MMC card
Fixes: 71645e65729f ("mmc: meson-gx: add signal resampling")
Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Pull XArray fixes from Matthew Wilcox:
"Fix some oversights in the XArray porcelain API:
- support for m68k's two-byte aligned pointers
- reserving entries using xa_insert()
- missing xa_insert_bh() and xa_insert_irq() functions
- simplify using xa_for_each()
- use lockdep correctly
- a few other minor fixes and improvements"
* tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-dax:
XArray: Fix an arithmetic error in xa_is_err
XArray tests: Check mark 2 gets squashed
XArray: Fix typo in comment
XArray: Honour reserved entries in xa_insert
XArray: Permit storing 2-byte-aligned pointers
XArray: Change xa_for_each iterator
XArray: Turn xa_init_flags into a static inline
XArray tests: Add RCU locking
|
|
Fixes: ec7d9c9ce8 ("ide: replace ->proc_fops with ->proc_show")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
gfxclk for OD setting is limited to 1980M for non-acg
ASICs of Vega10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
