summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-18Merge tag 'usb-serial-5.0-rc3' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.0-rc3 Here's a fix for the new ftdi gpio support, which failed to take autosuspend into account, and a patch adding missing SPDX identifiers to the keyspan headers. Included are also some new device ids. All but the SPDX patch have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.0-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: keyspan_usa: add proper SPDX lines for .h files USB: serial: pl2303: add new PID to support PL2303TB USB: serial: ftdi_sio: fix GPIO not working in autosuspend USB: serial: simple: add Motorola Tetra TPG2200 device id
2019-01-18Merge tag 'phy-for-5.0-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 5.0 -rc *) Fix de-reference before null check in TI's phy-gmii-sel driver *) Fix build breakage in AHCI platform driver (patch was merged in AHCI before dependent patches were merged in PHY layer) *) Fix the power on error path in ath79-usb PHY driver *) Fix the reset binding name to match the DT binding documentation in ath79-usb PHY driver. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.0-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy: ath79-usb: Fix the main reset name to match the DT binding phy: ath79-usb: Fix the power on error path phy: fix build breakage: add PHY_MODE_SATA phy: ti: ensure priv is not null before dereferencing it
2019-01-18Merge branch 'acpi-pci'Rafael J. Wysocki
* acpi-pci: drivers: thermal: int340x_thermal: Make PCI dependency explicit x86/intel/lpss: Make PCI dependency explicit platform/x86: apple-gmux: Make PCI dependency explicit platform/x86: intel_pmc: Make PCI dependency explicit platform/x86: intel_ips: make PCI dependency explicit vga-switcheroo: make PCI dependency explicit ata: pata_acpi: Make PCI dependency explicit ACPI / LPSS: Make PCI dependency explicit
2019-01-18USB: serial: keyspan_usa: add proper SPDX lines for .h filesGreg Kroah-Hartman
The keyspan_usa??msg.h files are under a BSD-3 style license, so properly label them as such with a SPDX line at the top of the file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-01-18staging: rtl8723bs: Fix build error with Clang when inlining is disabledNathan Chancellor
When CONFIG_NO_AUTO_INLINE was present in linux-next (which added '-fno-inline-functions' to KBUILD_CFLAGS), an allyesconfig build with Clang failed at the modpost stage: ERROR: "is_broadcast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! ERROR: "is_zero_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! ERROR: "is_multicast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined! These functions were marked as extern inline, meaning that if inlining doesn't happen, the function will be undefined, as it is above. This happens to work with GCC because the '-fno-inline-functions' option respects the __inline attribute so all instances of these functions are inlined as expected and the definition doesn't actually matter. However, with Clang and '-fno-inline-functions', a function has to be marked with the __always_inline attribute to be considered for inlining, which none of these functions are. Clang tries to find the symbol definition elsewhere as it was told and fails, which trickles down to modpost. To make sure that this code compiles regardless of compiler and make the intention of the code clearer, use 'static' to ensure these functions are always defined, regardless of inlining. Additionally, silence a checkpatch warning by switching from '__inline' to 'inline'. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-18mtd: rawnand: denali: get ->setup_data_interface() working againMasahiro Yamada
Commit 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops") missed to invert the if-conditonal for denali. Since then, the Denali NAND driver cannnot invoke setup_data_interface. Fixes: 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-18mtd: nand: jz4740: fix '__iomem *' vs. '* __iomem'Luc Van Oostenryck
The function jz_nand_ioremap_resource() needs a pointer to an __iomem pointer as its last argument but this argument is declared as: void * __iomem *base Fix this by using the correct declaration: void __iomem **base which then also removes the following Sparse's warnings: 282:15: warning: incorrect type in assignment (different address spaces) 282:15: expected void *[noderef] <asn:2> 282:15: got void [noderef] <asn:2> * 322:57: warning: incorrect type in argument 4 (different address spaces) 322:57: expected void *[noderef] <asn:2> *base 322:57: got void [noderef] <asn:2> ** 402:67: warning: incorrect type in argument 4 (different address spaces) 402:67: expected void *[noderef] <asn:2> *base 402:67: got void [noderef] <asn:2> ** Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-18USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLELubomir Rintel
This fixes autoloading the module by the OF compatible string. Fixes: 813e18b18a87 ("USB: EHCI: ehci-mv: add DT support") Cc: stable@vger.kernel.org Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-18USB: leds: fix regression in usbport led triggerChristian Lamparter
The patch "usb: simplify usbport trigger" together with "leds: triggers: add device attribute support" caused an regression for the usbport trigger. it will no longer enumerate any active usb hub ports under the "ports" directory in the sysfs class directory, if the usb host drivers are fully initialized before the usbport trigger was loaded. The reason is that the usbport driver tries to register the sysfs entries during the activate() callback. And this will fail with -2 / ENOENT because the patch "leds: triggers: add device attribute support" made it so that the sysfs "ports" group was only being added after the activate() callback succeeded. This version of the patch reverts parts of the "usb: simplify usbport trigger" patch and restores usbport trigger's functionality. Fixes: 6f7b0bad8839 ("usb: simplify usbport trigger") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-18usb: chipidea: fix static checker warning for NULL pointerPeter Chen
During the static checker, "data->usbmisc_data" may be NULL. Fix it by adding this pointer judgement before using. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-18MAINTAINERS: email address update in MAINTAINERS entriesShuah Khan
Update email address in MAINTAINERS entries. Signed-off-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-18USB: usbip: delete README fileGreg Kroah-Hartman
The README file ni the drivers/usb/usbip/ directory is not needed anymore, so just delete it. Cc: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Shuah Khan <shuah@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-18Merge tag 'fixes-for-v5.0-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v5.0-rc2 Few minor bug fixes on dwc3: adding a missing synchronize_irq() to prevent a very rare spurious interrupt during suspend; clearing needs_extra_trb flag to prevent it from being left erroneously set and confusing the driver when the request is recycled; initializing link_to a sensible default during init. Apart from these, one minor fix on dwc2 and another on f_sourcesink.c * tag 'fixes-for-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing usb: gadget: Potential NULL dereference on allocation error usb: dwc3: gadget: Fix the uninitialized link_state when udc starts usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup usb: dwc3: gadget: synchronize_irq dwc irq in suspend
2019-01-18drivers: thermal: int340x_thermal: Fix sysfs race conditionAaron Hill
Changes since V1: * Use dev_info instead of printk * Use dev_warn instead of BUG_ON Previously, sysfs_create_group was called before all initialization had fully run - specifically, before pci_set_drvdata was called. Since the sysctl group is visible to userspace as soon as sysfs_create_group returns, a small window of time existed during which a process could read from an uninitialized/partially-initialized device. This commit moves the creation of the sysctl group to after all initialized is completed. This ensures that it's impossible for userspace to read from a sysctl file before initialization has fully completed. To catch any future regressions, I've added a check to ensure that proc_thermal_emum_mode is never PROC_THERMAL_NONE when a process tries to read from a sysctl file. Previously, the aforementioned race condition could result in the 'else' branch running while PROC_THERMAL_NONE was set, leading to a null pointer deference. Signed-off-by: Aaron Hill <aa1ronham@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-01-17macvlan: replace kfree_skb by consume_skb for drop profilesYang Wei
Replace the kfree_skb() by consume_skb() to be drop monitor(dropwatch, perf) friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17neighbour: Do not perturb drop profiles when neigh_probeYang Wei
Replace the kfree_skb() by consume_skb() to be drop monitor(dropwatch, perf) friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17amd-xgbe: Fix mdio access for non-zero ports and clause 45 PHYsLendacky, Thomas
The XGBE hardware has support for performing MDIO operations using an MDIO command request. The driver mistakenly uses the mdio port address as the MDIO command request device address instead of the MDIO command request port address. Additionally, the driver does not properly check for and create a clause 45 MDIO command. Check the supplied MDIO register to determine if the request is a clause 45 operation (MII_ADDR_C45). For a clause 45 operation, extract the device address and register number from the supplied MDIO register and use them to set the MDIO command request device address and register number fields. For a clause 22 operation, the MDIO request device address is set to zero and the MDIO command request register number is set to the supplied MDIO register. In either case, the supplied MDIO port address is used as the MDIO command request port address. Fixes: 732f2ab7afb9 ("amd-xgbe: Add support for MDIO attached PHYs") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net: phy: add missing phy driver featuresCamelia Groza
The phy drivers for CS4340 and TN2020 are missing their features attributes. Add them. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Reported-by: Scott Wood <oss@buserror.net> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17dpaa_eth: NETIF_F_LLTX requires to do our own update of trans_startMadalin Bucur
As txq_trans_update() only updates trans_start when the lock is held, trans_start does not get updated if NETIF_F_LLTX is declared. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net: bridge: Fix ethernet header pointer before check skb forwardableYunjian Wang
The skb header should be set to ethernet header before using is_skb_forwardable. Because the ethernet header length has been considered in is_skb_forwardable(including dev->hard_header_len length). To reproduce the issue: 1, add 2 ports on linux bridge br using following commands: $ brctl addbr br $ brctl addif br eth0 $ brctl addif br eth1 2, the MTU of eth0 and eth1 is 1500 3, send a packet(Data 1480, UDP 8, IP 20, Ethernet 14, VLAN 4) from eth0 to eth1 So the expect result is packet larger than 1500 cannot pass through eth0 and eth1. But currently, the packet passes through success, it means eth1's MTU limit doesn't take effect. Fixes: f6367b4660dd ("bridge: use is_skb_forwardable in forward path") Cc: bridge@lists.linux-foundation.org Cc: Nkolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17vhost: log dirty page correctlyJason Wang
Vhost dirty page logging API is designed to sync through GPA. But we try to log GIOVA when device IOTLB is enabled. This is wrong and may lead to missing data after migration. To solve this issue, when logging with device IOTLB enabled, we will: 1) reuse the device IOTLB translation result of GIOVA->HVA mapping to get HVA, for writable descriptor, get HVA through iovec. For used ring update, translate its GIOVA to HVA 2) traverse the GPA->HVA mapping to get the possible GPA and log through GPA. Pay attention this reverse mapping is not guaranteed to be unique, so we should log each possible GPA in this case. This fix the failure of scp to guest during migration. In -next, we will probably support passing GIOVA->GPA instead of GIOVA->HVA. Fixes: 6b1e6cc7855b ("vhost: new device IOTLB API") Reported-by: Jintack Lim <jintack@cs.columbia.edu> Cc: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17Documentation: timestamping: correct path to net_tstamp.hJakub Kicinski
net_tstamp.h is an UAPI header, so it was moved under include/uapi. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18Merge branch 'linux-4.21' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
nouveau support for TU102 (RTX 2080 Ti) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA=mQsRr0BpRpv3n6UjthHush4u_kQR3oUGHkBtAHTmyCYw@mail.gmail.com
2019-01-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes frfom Jason Gunthorpe: "Not much so far. We have the usual batch of bugs and two fixes to code merged this cycle: - Restore valgrind support for the ioctl verbs interface merged this window, and fix a missed error code on an error path from that conversion - A user reported crash on obsolete mthca hardware - pvrdma was using the wrong command opcode toward the hypervisor - NULL pointer crash regression when dumping rdma-cm over netlink - Be conservative about exposing the global rkey" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/uverbs: Mark ioctl responses with UVERBS_ATTR_F_VALID_OUTPUT RDMA/mthca: Clear QP objects during their allocation RDMA/vmw_pvrdma: Return the correct opcode when creating WR RDMA/cma: Add cm_id restrack resource based on kernel or user cm_id type RDMA/nldev: Don't expose unsafe global rkey to regular user RDMA/uverbs: Fix post send success return value in case of error
2019-01-18Merge tag 'drm-fixes-2019-01-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "The rc3 fixes are a bit scattered: - meson, sun4i and rockchip all had missing of_node_put. - qxl and virtio both were advertising dma-buf to userspace when they really shouldn't have. Otherwise: meson: - modesetting regression fix i915 GVT: - one cmd parser failure fix - region cleanup fix in vGPU destroy amdgpu: - KFD fixes for arm64 mixed APU/DGPU - vega12 powerplay fix - raven DC fixes - freesync fix" * tag 'drm-fixes-2019-01-18' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Detach backlight from stream drm/sun4i: backend: add missing of_node_puts Revert "drm/amdgpu: validate user pitch alignment" Revert "drm/amdgpu: validate user GEM object size" drm/meson: Fix atomic mode switching regression drm/i915/gvt: Fix mmap range check drm/i915/gvt: free VFIO region space in vgpu detach drm/amd/display: Fix disabled cursor on top screen edge drm/amd/display: fix warning on raven hotplug drm/amd/display: fix PME notification not working in RV desktop drm/amd/display: Only get the connector state for VRR when toggled drm/amd/display: Pack DMCU iRAM alignment drm/amd/powerplay: run acg btc for Vega12 drm/amdkfd: Don't assign dGPUs to APU topology devices drm/amdkfd: Allow building KFD on ARM64 (v2) drm/meson: add missing of_node_put drm/virtio: drop prime import/export callbacks drm/qxl: drop prime import/export callbacks drm/i915/gvt: Allow F_CMD_ACCESS on mmio 0x21f0 drm/rockchip: add missing of_node_put
2019-01-18Merge tag 'led-fix-for-5.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fix from Jacek Anaszewski. * tag 'led-fix-for-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: lp5523: fix a missing check of return value of lp55xx_read
2019-01-18Merge tag 'hwmon-for-v5.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Minor fixes/regressions" * tag 'hwmon-for-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (tmp421) Correct the misspelling of the tmp442 compatible attribute in OF device ID table hwmon: (occ) Fix potential integer overflow hwmon: (lm80) Fix missing unlock on error in set_fan_div() hwmon: (nct6775) Enable IO mapping for NCT6797D and NCT6798D hwmon: (nct6775) Fix chip ID for NCT6798D
2019-01-17block: Cleanup license noticeThomas Gleixner
Remove the imprecise and sloppy: "This files is licensed under the GPL." license notice in the top level comment. 1) The file already contains a SPDX license identifier which clearly states that the license of the file is GPL V2 only 2) The notice resolves to GPL v1 or later for scanners which is just contrary to the intent of SPDX identifiers to provide clear and non ambiguous license information. Aside of that the value add of this notice is below zero, Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Matias Bjorling <mb@lightnvm.io> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Fixes: 6a5ac9846508 ("block: Make struct request_queue smaller for CONFIG_BLK_DEV_ZONED=n") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-18drm/nouveau/core: recognise TU102Ben Skeggs
Would usually do this split-out, verifying each component indivitually, but this has been squashed together to be more palatable for merging in 5.0-rc. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-01-17ARCv2: lib: memeset: fix doing prefetchw outside of bufferEugeniy Paltsev
ARCv2 optimized memset uses PREFETCHW instruction for prefetching the next cache line but doesn't ensure that the line is not past the end of the buffer. PRETECHW changes the line ownership and marks it dirty, which can cause issues in SMP config when next line was already owned by other core. Fix the issue by avoiding the PREFETCHW Some more details: The current code has 3 logical loops (ignroing the unaligned part) (a) Big loop for doing aligned 64 bytes per iteration with PREALLOC (b) Loop for 32 x 2 bytes with PREFETCHW (c) any left over bytes loop (a) was already eliding the last 64 bytes, so PREALLOC was safe. The fix was removing PREFETCW from (b). Another potential issue (applicable to configs with 32 or 128 byte L1 cache line) is that PREALLOC assumes 64 byte cache line and may not do the right thing specially for 32b. While it would be easy to adapt, there are no known configs with those lie sizes, so for now, just compile out PREALLOC in such cases. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: stable@vger.kernel.org #4.4+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: rewrote changelog, used asm .macro vs. "C" macro]
2019-01-17ARC: mm: do_page_fault fixes #1: relinquish mmap_sem if signal arrives while ↵Vineet Gupta
handle_mm_fault do_page_fault() forgot to relinquish mmap_sem if a signal came while handling handle_mm_fault() - due to say a ctl+c or oom etc. This would later cause a deadlock by acquiring it twice. This came to light when running libc testsuite tst-tls3-malloc test but is likely also the cause for prior seen LTP failures. Using lockdep clearly showed what the issue was. | # while true; do ./tst-tls3-malloc ; done | Didn't expect signal from child: got `Segmentation fault' | ^C | ============================================ | WARNING: possible recursive locking detected | 4.17.0+ #25 Not tainted | -------------------------------------------- | tst-tls3-malloc/510 is trying to acquire lock: | 606c7728 (&mm->mmap_sem){++++}, at: __might_fault+0x28/0x5c | |but task is already holding lock: |606c7728 (&mm->mmap_sem){++++}, at: do_page_fault+0x9c/0x2a0 | | other info that might help us debug this: | Possible unsafe locking scenario: | | CPU0 | ---- | lock(&mm->mmap_sem); | lock(&mm->mmap_sem); | | *** DEADLOCK *** | ------------------------------------------------------------ What the change does is not obvious (note to myself) prior code was | do_page_fault | | down_read() <-- lock taken | handle_mm_fault <-- signal pending as this runs | if fatal_signal_pending | if VM_FAULT_ERROR | up_read | if user_mode | return <-- lock still held, this was the BUG New code | do_page_fault | | down_read() <-- lock taken | handle_mm_fault <-- signal pending as this runs | if fatal_signal_pending | if VM_FAULT_RETRY | return <-- not same case as above, but still OK since | core mm already relinq lock for FAULT_RETRY | ... | | < Now falls through for bug case above > | | up_read() <-- lock relinquished Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-01-17af_packet: fix raw sockets over 6in4 tunnelNicolas Dichtel
Since commit cb9f1b783850, scapy (which uses an AF_PACKET socket in SOCK_RAW mode) is unable to send a basic icmp packet over a sit tunnel: Here is a example of the setup: $ ip link set ntfp2 up $ ip addr add 10.125.0.1/24 dev ntfp2 $ ip tunnel add tun1 mode sit ttl 64 local 10.125.0.1 remote 10.125.0.2 dev ntfp2 $ ip addr add fd00:cafe:cafe::1/128 dev tun1 $ ip link set dev tun1 up $ ip route add fd00:200::/64 dev tun1 $ scapy >>> p = [] >>> p += IPv6(src='fd00:100::1', dst='fd00:200::1')/ICMPv6EchoRequest() >>> send(p, count=1, inter=0.1) >>> quit() $ ip -s link ls dev tun1 | grep -A1 "TX.*errors" TX: bytes packets errors dropped carrier collsns 0 0 1 0 0 0 The problem is that the network offset is set to the hard_header_len of the output device (tun1, ie 14 + 20) and in our case, because the packet is small (48 bytes) the pskb_inet_may_pull() fails (it tries to pull 40 bytes (ipv6 header) starting from the network offset). This problem is more generally related to device with variable hard header length. To avoid a too intrusive patch in the current release, a (ugly) workaround is proposed in this patch. It has to be cleaned up in net-next. Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=993675a3100b1 Link: http://patchwork.ozlabs.org/patch/1024489/ Fixes: cb9f1b783850 ("ip: validate header length on virtual device xmit") CC: Willem de Bruijn <willemb@google.com> CC: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-18genirq/irqdesc: Fix double increment in alloc_descs()Huacai Chen
The recent rework of alloc_descs() introduced a double increment of the loop counter. As a consequence only every second affinity mask is validated. Remove it. [ tglx: Massaged changelog ] Fixes: c410abbbacb9 ("genirq/affinity: Add is_managed to struct irq_affinity_desc") Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhuacai@gmail.com> Cc: Dou Liyang <douliyangs@gmail.com> Link: https://lkml.kernel.org/r/1547694009-16261-1-git-send-email-chenhc@lemote.com
2019-01-18x86/entry/64/compat: Fix stack switching for XEN PVJan Beulich
While in the native case entry into the kernel happens on the trampoline stack, PV Xen kernels get entered with the current thread stack right away. Hence source and destination stacks are identical in that case, and special care is needed. Other than in sync_regs() the copying done on the INT80 path isn't NMI / #MC safe, as either of these events occurring in the middle of the stack copying would clobber data on the (source) stack. There is similar code in interrupt_entry() and nmi(), but there is no fixup required because those code paths are unreachable in XEN PV guests. [ tglx: Sanitized subject, changelog, Fixes tag and stable mail address. Sigh ] Fixes: 7f2590a110b8 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries") Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: xen-devel@lists.xenproject.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/5C3E1128020000780020DFAD@prv1-mh.provo.novell.com
2019-01-18bpf: fix SO_MAX_PACING_RATE to support TCP internal pacingYuchung Cheng
If sch_fq packet scheduler is not used, TCP can fallback to internal pacing, but this requires sk_pacing_status to be properly set. Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Lawrence Brakmo <brakmo@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-18bpf: bpf_setsockopt: reset sock dst on SO_MARK changesPeter Oskolkov
In sock_setsockopt() (net/core/sock.h), when SO_MARK option is used to change sk_mark, sk_dst_reset(sk) is called. The same should be done in bpf_setsockopt(). Fixes: 8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf") Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Peter Oskolkov <posk@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-18genirq: Fix the kerneldoc comment for struct irq_affinity_descJonathan Corbet
A recent commit added a new field but did not update the kerneldoc comment, leading to this build warning: ./include/linux/interrupt.h:268: warning: Function parameter or member 'is_managed' not described in 'irq_affinity_desc' Add the missing information, making the docs build 0.001% quieter. Fixes: c410abbbacb9 ("genirq/affinity: Add is_managed to struct irq_affinity_desc") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dou Liyang <douliyangs@gmail.com> Link: https://lkml.kernel.org/r/20190108170432.59bae8a6@lwn.net
2019-01-18Merge tag 'drm-misc-fixes-2019-01-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.0-rc3: - Add missing calls to of_node_put to sun4i, meson, and rockchip. - Drop unimplemented prime callbacks in virtio and qxl, so support for prime is not advertised on those drivers. - Fix mode switching regression in meson. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9af07312-f435-2fda-65a2-9fe92cdf5da4@linux.intel.com
2019-01-18Merge tag 'drm-intel-fixes-2019-01-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915/gvt fixes for v5.0-rc3 "This contains one cmd parser failure fix to allow cmd access for one register, and fix region cleanup properly in vGPU destroy, and another fix for critical mmap size check mistake." Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87ef9bfusc.fsf@intel.com
2019-01-18Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Fixes for 5.0: - Fix KFD on ARM64 - Fix KFD topology with mixed APU and dGPU systems - Powerplay fix for vega12 - DC Raven fixes - Freesync fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190116224524.3314-1-alexander.deucher@amd.com
2019-01-17udp6: add missing rehash callback to udpliteAlexey Kodanev
After commit 23b0269e58ae ("net: udp6: prefer listeners bound to an address"), UDP-Lite only works when specifying a local address for the sockets. This is related to the problem addressed in the commit 719f835853a9 ("udp: add rehash on connect()"). Moreover, __udp6_lib_lookup() now looks for a socket immediately in the secondary hash table. And this issue was found with LTP/network tests as well. Fixes: 23b0269e58ae ("net: udp6: prefer listeners bound to an address") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17udp: add missing rehash callback to udpliteAlexey Kodanev
After commit 4cdeeee9252a ("net: udp: prefer listeners bound to an address"), UDP-Lite only works when specifying a local address for the sockets. This is related to the problem addressed in the commit 719f835853a9 ("udp: add rehash on connect()"). Moreover, __udp4_lib_lookup() now looks for a socket immediately in the secondary hash table. The issue was found with LTP/network tests (UDP-Lite test-cases). Fixes: 4cdeeee9252a ("net: udp: prefer listeners bound to an address") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net/sched: cls_flower: allocate mask dynamically in fl_change()Ivan Vecera
Recent changes (especially 05cd271fd61a ("cls_flower: Support multiple masks per priority")) in the fl_flow_mask structure grow it and its current size e.g. on x86_64 with defconfig is 760 bytes and more than 1024 bytes with some debug options enabled. Prior the mentioned commit its size was 176 bytes (using defconfig on x86_64). With regard to this fact it's reasonable to allocate this structure dynamically in fl_change() to reduce its stack size. v2: - use kzalloc() instead of kcalloc() Fixes: 05cd271fd61a ("cls_flower: Support multiple masks per priority") Cc: Jiri Pirko <jiri@resnulli.us> Cc: Paul Blakey <paulb@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17ARC: show_regs: lockdep: re-enable preemptionVineet Gupta
signal handling core calls show_regs() with preemption disabled which on ARC takes mmap_sem for mm/vma access, causing lockdep splat. | [ARCLinux]# ./segv-null-ptr | potentially unexpected fatal signal 11. | BUG: sleeping function called from invalid context at kernel/fork.c:1011 | in_atomic(): 1, irqs_disabled(): 0, pid: 70, name: segv-null-ptr | no locks held by segv-null-ptr/70. | CPU: 0 PID: 70 Comm: segv-null-ptr Not tainted 4.18.0+ #69 | | Stack Trace: | arc_unwind_core+0xcc/0x100 | ___might_sleep+0x17a/0x190 | mmput+0x16/0xb8 | show_regs+0x52/0x310 | get_signal+0x5ee/0x610 | do_signal+0x2c/0x218 | resume_user_mode_begin+0x90/0xd8 Workaround by re-enabling preemption temporarily. Note that the preemption disabling in core code around show_regs() was introduced by commit 3a9f84d354ce ("signals, debug: fix BUG: using smp_processor_id() in preemptible code in print_fatal_signal()") to silence a differnt lockdep seen on x86 bakc in 2009. Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-01-17ARC: show_regs: lockdep: avoid page allocator...Vineet Gupta
and use smaller/on-stack buffer instead The motivation for this change was lockdep splat like below. | potentially unexpected fatal signal 11. | BUG: sleeping function called from invalid context at ../mm/page_alloc.c:4317 | in_atomic(): 1, irqs_disabled(): 0, pid: 57, name: segv | no locks held by segv/57. | Preemption disabled at: | [<8182f17e>] get_signal+0x4a6/0x7c4 | CPU: 0 PID: 57 Comm: segv Not tainted 4.17.0+ #23 | | Stack Trace: | arc_unwind_core.constprop.1+0xd0/0xf4 | __might_sleep+0x1f6/0x234 | __get_free_pages+0x174/0xca0 | show_regs+0x22/0x330 | get_signal+0x4ac/0x7c4 # print_fatal_signals() -> preempt_disable() | do_signal+0x30/0x224 | resume_user_mode_begin+0x90/0xd8 So signal handling core calls show_regs() with preemption disabled but an ensuing GFP_KERNEL page allocator call is flagged by lockdep. We could have switched to GFP_NOWAIT, but turns out that is not enough anways and eliding page allocator call leads to less code and instruction traces to sift thru when debugging pesky crashes. FWIW, this patch doesn't cure the lockdep splat (which next patch does). Reviewed-by: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-01-17ARC: perf: avoid kernel killing where it is possibleEugeniy Paltsev
No, not gonna die tonight. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-01-17ARC: perf: move HW events mapping to separate functionEugeniy Paltsev
Move HW events mapping to separate function to make code more readable. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-01-17ARC: perf: introduce Kernel PMU events supportEugeniy Paltsev
Export all available ARC architected hardware events as kernel PMU events to make non-generic events accessible. ARC PMU HW allow us to read the list of all available events names. So we generate kernel PMU event list dynamically in arc_pmu_device_probe() using human-readable events names we got from HW instead of using pre-defined events list. -------------------------->8-------------------------- $ perf list [snip] arc_pmu/bdata64/ [Kernel PMU event] arc_pmu/bdcstall/ [Kernel PMU event] arc_pmu/bdslot/ [Kernel PMU event] arc_pmu/bfbmp/ [Kernel PMU event] arc_pmu/bfirqex/ [Kernel PMU event] arc_pmu/bflgstal/ [Kernel PMU event] arc_pmu/bflush/ [Kernel PMU event] -------------------------->8-------------------------- Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-01-17ARC: perf: trivial code cleanupEugeniy Paltsev
* Use BIT(), lower_32_bits(), upper_32_bits() macroses, fix code style violations. * Use u32, u64, s64 instead of uint32_t, uint64_t, int64_t * Fix description comment as this code doesn't belong only to ARC700 anymore. * Use SPDX License Identifier. * Remove useless ifdefs. ifdef around 'arc_pmu_match' structure declaration is useless as we refer to 'arc_pmu_match' in several places which aren't guarded with ifdef. Nevertheless 'ARC' option selects 'OF' unconditionally so we can simply get rid of this ifdef. Acked-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-01-17ARC: perf: map generic branches to correct hardware conditionEugeniy Paltsev
So far we've mapped branches to "ijmp" which also counts conditional branches NOT taken. This makes us different from other architectures such as ARM which seem to be counting only taken branches. So use "ijmptak" hardware condition which only counts (all jump instructions that are taken) 'ijmptak' event is available on both ARCompact and ARCv2 ISA based cores. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked changelog]
generated by cgit (git 2.34.1) at 2025-09-12 02:41:31 +0000