summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-20xen: Fixed assignment error in if statementLisa Nguyen
Fixed assignment error in if statement in balloon.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-20xen/xenbus: Fixed over 80 character limit issueLisa Nguyen
Fixed the format length of the xenbus_backend_ioctl() function to meet the 80 character limit in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-20xen/xenbus: Fixed indentation error in switch caseLisa Nguyen
Fixed the indentation error in the switch case in xenbus_dev_backend.c Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-20gpio: mxs: Use set and clear capabilities of the gpio controllerMaxime Ripard
The current driver doesn't use the set and clear registers found on the mxs gpio controller. This leads the generic gpio controller to be using some internal value to avoid looking up the value stored in the registers, making it behave pretty much like a cache. This raises some coherency problem when a gpio is not modified by the gpio controller, while it can easily be fixed by using the set and clear registers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20gpio-langwell: fix irq conflicts when DT is not usedDavid Cohen
When DT is not used IOAPIC does not register irq domain. As result IOAPIC won't care about gpio-langwell's virq and may cause conflict if an irq number is equal to gpio-langwell's virq mapped beforehand. This patch tells gpio_langwell to not ignore irq_base if != 0 and preferably use it to avoid the conflict. If DT is used, irq_base can safely be 0. Signed-off-by: David Cohen <david.a.cohen@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache nodeGregory CLEMENT
During the conversion to the internal-regs' subnode, the L2-cache node haven not been converted (due to a wrong choice made by myself during the resolution of the merge conflict when I rebased the commit). This leads to wrong address for L2 cache which prevent it to be used on Armada 370. This commit fix the address reg of the e L2-cache node. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-20ARM: plat-orion: Fix num_resources and id for ge10 and ge11Gregory CLEMENT
When platform data were moved from arch/arm/mach-mv78xx0/common.c to arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion: Consolidate ethernet platform data", there were few typo made on gigabit Ethernet interface ge10 and ge11. This commit writes back their initial value, which allows to use this interfaces again. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Cc: <stable@vger.kernel.org> # v3.0.x Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-20gpio: mcp23s08: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=mAxel Lin
This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m && CONFIG_GPIO_MCP23S08=y. LD init/built-in.o drivers/built-in.o: In function `mcp23017_write': clkdev.c:(.text+0x1e14): undefined reference to `i2c_smbus_write_word_data' drivers/built-in.o: In function `mcp23017_read': clkdev.c:(.text+0x1e24): undefined reference to `i2c_smbus_read_word_data' drivers/built-in.o: In function `mcp23008_write': clkdev.c:(.text+0x1e8c): undefined reference to `i2c_smbus_write_byte_data' drivers/built-in.o: In function `mcp23008_read': clkdev.c:(.text+0x1e98): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23008_read_regs': clkdev.c:(.text+0x1ed0): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23s08_init': clkdev.c:(.init.text+0x30): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `mcp23s08_exit': clkdev.c:(.exit.text+0x30): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support. Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m. The real fix though is to break the driver apart into a SPI part, an I2C part and a common part. But that's something for 3.11 while this is something for 3.10/stable. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20ASoC: wm5110: Add missing speaker initialisationMark Brown
Add callback to initialise the speaker in the core following the recent changes to handling of integration with the thermal interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-21ARM: dts: Enabling samsung-usb2phy driver for exynos5250Vivek Gautam
Adding usbphy node for Exynos5250 along with the necessary device data to be parsed. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-05-20Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, ↵Bjorn Helgaas
00:03.0" This reverts commit dd72be99d11dbf738d910a38479ce414a51eb21e. Andy Shevchenko <andy.shevchenko@gmail.com> reported that this commit broke Intel Medfield devices. Reference: https://lkml.kernel.org/r/CAHp75Vdf6gFZChS47=grUygHBDWcoOWDYPzw+Zj5bdVCWj85Jw@mail.gmail.com Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-05-20drm/radeon: add Hainan pci idsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-05-20drm/radeon: add golden register settings for Hainan (v2)Alex Deucher
v2: fix typo Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-05-20drm/radeon: sun/hainan chips do not have UVD (v2)Alex Deucher
Skip UVD handling on them. v2: split has_uvd tracking into separate patch Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-20drm/radeon: track which asics have UVDAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-20drm/radeon: radeon-asic updates for HainanAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-05-20drm/radeon: fill in ucode loading support for HainanAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-05-20drm/radeon: don't touch DCE or VGA regs on Hainan (v3)Alex Deucher
Hainan has no display hardware: - no DCE (crtc, uniphy, dac, etc.) - no VGA v2: fix bios fetch v3: fix interrupts Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-05-20staging: ramster: add how-to documentDan Magenheimer
Add how-to documentation that provides a step-by-step guide for configuring and trying out a ramster cluster. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20drm/radeon: fill in GPU init for Hainan (v2)Alex Deucher
v2: fix gb_addr_config value Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-20drm/radeon: add chip family for HainanAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-05-20Merge tag 'pinctrl-fixes-v3.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: - Three fixes to make the boot path for device tree work properly on the Nomadik pin controller. - Compile warning fix for the vt8500 driver. - Fix error path in pinctrl-single. - Free mappings in error path of the Lantiq controller. - Documentation fixes. * tag 'pinctrl-fixes-v3.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl/lantiq: Free mapping configs for both pin and groups pinctrl: single: fix error return code in pcs_parse_one_pinctrl_entry() pinctrl: generic: Fix typos and clarify comments pinctrl: vt8500: Fix incorrect data in WM8750 pinctrl table pinctrl: abx500: Rejiggle platform data and DT initialisation pinctrl: abx500: Specify failed sub-driver by ID instead of driver_data
2013-05-20Merge branch 'rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fix from Michal Marek: "In an attempt to improve make rpm-pkg, I broke make binrpm-pkg" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: package: Makefile: unbreak binrpm-pkg target
2013-05-20drm/radeon/dce2: use 10khz units for audio dto calculationAlex Deucher
Avoids overflows on DCE2.x devices. Also clarify the calculation on other asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-05-20drm/radeon: Fix VRAM size calculation for VRAM >= 4GBNiels Ole Salscheider
Add ULL prefix to avoid overflow. Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-05-20drm/radeon: Remove superfluous variableNiels Ole Salscheider
bool in_mode_set from struct radeon_crtc is not used anymore. Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-05-20MAINTAINERS: Add myself as maintainer for LM95234 and TMP401 driversGuenter Roeck
I wrote the LM95234 driver and extended the TMP401 driver substantially, and I have hardware to test both, so it makes sense to explicitly maintain them. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2013-05-20ASoC: soc-compress: Send correct stream event for capture startCharles Keepax
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-20ASoC: max98090: request IRQF_ONESHOT interruptAndrew Bresticker
request_threaded_irq() rejects calls which both do not specify a handler (indicating that the primary IRQ handler should be used) and do not set IRQF_ONESHOT because the combination is unsafe with level-triggered interrupts. It is safe in this case, though, since max98090 IRQs are edge-triggered and the interrupts aren't ACK'ed until the codec's IRQ status register is read. Because of this, an IRQF_ONESHOT interrupt doesn't really make a difference, but request one anyway in order to make request_threaded_irq() happy. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-20bnx2x: Fix GSO for 57710/57711 chipsYuval Mintz
Starting with commit 91226790bbe2dbfbba48dd79d49f2b38ef10eb97 `bnx2x: use FW 7.8.17', the bnx2x driver no longer requests the FW to perform IP checksums for IPv4 packets. This behaviour needs to be revised for 57710/57711 chips - when using GSO, if the driver will not set the IP checksum flag then packets will be transmitted by the chip without a valid IP checksum, resulting in a drop of all such packets on the receiver-side. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20ip_gre: fix a possible crash in ipgre_err()Eric Dumazet
Another fix needed in ipgre_err(), as parse_gre_header() might change skb->head. Bug added in commit c54419321455 (GRE: Refactor GRE tunneling code.) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20r8169: fix offloaded tx checksum for small packets.françois romieu
8168evl offloaded checksums are wrong since commit e5195c1f31f399289347e043d6abf3ffa80f0005 ("r8169: fix 8168evl frame padding.") pads small packets to 60 bytes (without ethernet checksum). Typical symptoms appear as UDP checksums which are wrong by the count of added bytes. It isn't worth compensating. Let the driver checksum. Due to the skb length changes, TSO code is moved before the Tx descriptor gets written. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-19bonding: fix multiple 3ad mode sysfs race conditionsnikolay@redhat.com
When bond_3ad_get_active_agg_info() is used in all show_ad_ functions it is not protected against slave manipulation and since it walks over the slaves and uses them, this can easily result in NULL pointer dereference or use of freed memory. Both the new wrapper and the internal function are exported to the bonding as they're needed in different places. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-19bonding: arp_ip_count and arp_targets can be wrongnikolay@redhat.com
When getting arp_ip_targets if we encounter a bad IP, arp_ip_count still gets increased and all the targets after the wrong one will not be probed if arp_interval is enabled after that (unless a new IP target is added through sysfs) because of the zero entry, in this case reading arp_ip_target through sysfs will show valid targets even if there's a zero entry. Example: 1.2.3.4,4.5.6.7,blah,5.6.7.8 When retrieving the list from arp_ip_target the output would be: 1.2.3.4,4.5.6.7,5.6.7.8 but there will be a 0 entry between 4.5.6.7 and 5.6.7.8. If arp_interval is enabled after that 5.6.7.8 will never be checked because of that. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-19bonding: replace %x with %pI4 for IPv4 addressesnikolay@redhat.com
There're few pr_debug() places that can provide the IPv4 address in dotted decimal format instead which is more helpful. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-19bonding: fix set mode race conditionsnikolay@redhat.com
Changing the mode without any locking can result in multiple races (e.g. upping a bond, enslaving/releasing). Depending on which race is hit the impact can vary from incosistent bond state to kernel crash. Use RTNL to synchronize the mode setting with the dangerous races. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20Merge branch 'drm-nouveau-fixes-3.10' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Fixes some s/r problem with copy engines and ZCULL issues and playlist issues * 'drm-nouveau-fixes-3.10' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: ensure channels are stopped before saving fences for suspend drm/nv50/fifo: prevent races between clients updating playlists drm/nvc0/fifo: prevent CHAN_TABLE_ERROR:CHANNEL_PENDING on fifo fini drm/nvc0/fifo: prevent races between clients updating playlists drm/nve0/fifo: prevent races between clients updating playlists drm/nve0/ltcg: poke the partition count into yet another register drm/nvc0/ltcg: fix handling of disabled partitions drm/nvc0/ce: disable ce1 on a number of chipsets drm/nouveau/bios: fix thinko in ZM_MASK_ADD opcode drm/nouveau: fix build with nv50->nvc0
2013-05-20drm/nouveau: ensure channels are stopped before saving fences for suspendBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-05-20drm/nv50/fifo: prevent races between clients updating playlistsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-05-20drm/nvc0/fifo: prevent CHAN_TABLE_ERROR:CHANNEL_PENDING on fifo finiBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-05-20drm/nvc0/fifo: prevent races between clients updating playlistsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-05-20drm/nve0/fifo: prevent races between clients updating playlistsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-05-20drm/nve0/ltcg: poke the partition count into yet another registerBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-05-20drm/nvc0/ltcg: fix handling of disabled partitionsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-05-20drm/nvc0/ce: disable ce1 on a number of chipsetsBen Skeggs
The falcon is present, but the rest of the copy engine doesn't appear to be... PUNITS doesn't report disabled (maybe the bits for the copy engines got added later?), so we end up trying to use a non-functional CE1, and bust all sorts of things.. Most notably, suspend/resume.. Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-05-20drm/nouveau/bios: fix thinko in ZM_MASK_ADD opcodeBen Skeggs
Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-05-20drm/nouveau: fix build with nv50->nvc0Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-20virtio_console: fix uapi headerMichael S. Tsirkin
uapi should use __u32 not u32. Fix a macro in virtio_console.h which uses u32. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
2013-05-20Hoist memcpy_fromiovec/memcpy_toiovec into lib/Rusty Russell
ERROR: "memcpy_fromiovec" [drivers/vhost/vhost_scsi.ko] undefined! That function is only present with CONFIG_NET. Turns out that crypto/algif_skcipher.c also uses that outside net, but it actually needs sockets anyway. In addition, commit 6d4f0139d642c45411a47879325891ce2a7c164a added CONFIG_NET dependency to CONFIG_VMCI for memcpy_toiovec, so hoist that function and revert that commit too. socket.h already includes uio.h, so no callers need updating; trying only broke things fo x86_64 randconfig (thanks Fengguang!). Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-05-19ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apisSantosh Shilimkar
With the OMAP serial driver sysc cleanup patches in this series, we can now remove the hwmod external apis for sysc fiddling. While at this, also remove unused sysc auto idle api from hwmod code. Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Rajendra nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda Signed-off-by: Paul Walmsley <paul@pwsan.com>
generated by cgit (git 2.34.1) at 2025-09-13 23:36:16 +0000