| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a small cleanup in the drivers/xen/xenbus Makefile
- a fix of the Xen xenstore driver to improve connecting to a late
started Xenstore
- an enhancement for better support of ballooning in PVH guests
- a cleanup using try_cmpxchg() instead of open coding it
* tag 'for-linus-6.10a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers/xen: Improve the late XenStore init protocol
xen/xenbus: Use *-y instead of *-objs in Makefile
xen/x86: add extra pages to unpopulated-alloc if available
locking/x86/xen: Use try_cmpxchg() in xen_alloc_p2m_entry()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs updates from David Sterba:
"A few more updates, mostly stability fixes or user visible changes:
- fix race in zoned mode during device replace that can lead to
use-after-free
- update return codes and lower message levels for quota rescan where
it's causing false alerts
- fix unexpected qgroup id reuse under some conditions
- fix condition when looking up extent refs
- add option norecovery (removed in 6.8), the intended replacements
haven't been used and some aplications still rely on the old one
- build warning fixes"
* tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: re-introduce 'norecovery' mount option
btrfs: fix end of tree detection when searching for data extent ref
btrfs: scrub: initialize ret in scrub_simple_mirror() to fix compilation warning
btrfs: zoned: fix use-after-free due to race with dev replace
btrfs: qgroup: fix qgroup id collision across mounts
btrfs: qgroup: update rescan message levels and error codes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull more erofs updates from Gao Xiang:
"The main ones are metadata API conversion to byte offsets by Al Viro.
Another patch gets rid of unnecessary memory allocation out of DEFLATE
decompressor. The remaining one is a trivial cleanup.
- Convert metadata APIs to byte offsets
- Avoid allocating DEFLATE streams unnecessarily
- Some erofs_show_options() cleanup"
* tag 'erofs-for-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: avoid allocating DEFLATE streams before mounting
z_erofs_pcluster_begin(): don't bother with rounding position down
erofs: don't round offset down for erofs_read_metabuf()
erofs: don't align offset for erofs_read_metabuf() (simple cases)
erofs: mechanically convert erofs_read_metabuf() to offsets
erofs: clean up erofs_show_options()
|
|
Pull bcachefs fixes from Kent Overstreet:
"Nothing exciting, just syzbot fixes (except for the one
FMODE_CAN_ODIRECT patch).
Looks like syzbot reports have slowed down; this is all catch up from
two weeks of conferences.
Next hardening project is using Thomas's error injection tooling to
torture test repair"
* tag 'bcachefs-2024-05-24' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix race path in bch2_inode_insert()
bcachefs: Ensure we're RW before journalling
bcachefs: Fix shutdown ordering
bcachefs: Fix unsafety in bch2_dirent_name_bytes()
bcachefs: Fix stack oob in __bch2_encrypt_bio()
bcachefs: Fix btree_trans leak in bch2_readahead()
bcachefs: Fix bogus verify_replicas_entry() assert
bcachefs: Check for subvolues with bogus snapshot/inode fields
bcachefs: bch2_checksum() returns 0 for unknown checksum type
bcachefs: Fix bch2_alloc_ciphers()
bcachefs: Add missing guard in bch2_snapshot_has_children()
bcachefs: Fix missing parens in drop_locks_do()
bcachefs: Improve bch2_assert_pos_locked()
bcachefs: Fix shift overflows in replicas.c
bcachefs: Fix shift overflow in btree_lost_data()
bcachefs: Fix ref in trans_mark_dev_sbs() error path
bcachefs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
bcachefs: Fix rcu splat in check_fix_ptrs()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a change to input core to trim amount of keys data in modalias string
in case when a device declares too many keys and they do not fit in
uevent buffer instead of reporting an error which results in uevent
not being generated at all
- support for Machenike G5 Pro Controller added to xpad driver
- support for FocalTech FT5452 and FT8719 added to edt-ft5x06
- support for new SPMI vibrator added to pm8xxx-vibrator driver
- missing locking added to cyapa touchpad driver
- removal of unused fields in various driver structures
- explicit initialization of i2c_device_id::driver_data to 0 dropped
from input drivers
- other assorted fixes and cleanups.
* tag 'input-for-v6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
Input: edt-ft5x06 - add support for FocalTech FT5452 and FT8719
dt-bindings: input: touchscreen: edt-ft5x06: Document FT5452 and FT8719 support
Input: xpad - add support for Machenike G5 Pro Controller
Input: try trimming too long modalias strings
Input: drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: zet6223 - remove an unused field in struct zet6223_ts
Input: chipone_icn8505 - remove an unused field in struct icn8505_data
Input: cros_ec_keyb - remove an unused field in struct cros_ec_keyb
Input: lpc32xx-keys - remove an unused field in struct lpc32xx_kscan_drv
Input: matrix_keypad - remove an unused field in struct matrix_keypad
Input: tca6416-keypad - remove unused struct tca6416_drv_data
Input: tca6416-keypad - remove an unused field in struct tca6416_keypad_chip
Input: da7280 - remove an unused field in struct da7280_haptic
Input: ff-core - prefer struct_size over open coded arithmetic
Input: cyapa - add missing input core locking to suspend/resume functions
input: pm8xxx-vibrator: add new SPMI vibrator support
dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
input: pm8xxx-vibrator: refactor to support new SPMI vibrator
Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculation
Input: sur40 - convert le16 to cpu before use
...
|
|
bio_vec start offset may be relatively large particularly when large
folio gets added to the bio. A bigger offset will result in avoiding the
single-segment mapping optimization and end up using expensive
mempool_alloc further.
Rather than using absolute value, adjust bv_offset by
NVME_CTRL_PAGE_SIZE while checking if segment can be fitted into one/two
PRP entries.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
sgs/sws are unused, so remove these from nvme_ns_head structure.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 6.10-rc1. Most of changes are various
device-specific fixes and quirks, while there are a few small changes
in ALSA core timer and module / built-in fixes"
* tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 440/460 G11.
ALSA: core: Enable proc module when CONFIG_MODULES=y
ALSA: core: Fix NULL module pointer assignment at card init
ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
ASoC: dt-bindings: stm32: Ensure compatible pattern matches whole string
ASoC: tas2781: Fix wrong loading calibrated data sequence
ASoC: tas2552: Add TX path for capturing AUDIO-OUT data
ALSA: usb-audio: Fix for sampling rates support for Mbox3
Documentation: sound: Fix trailing whitespaces
ALSA: timer: Set lower bound of start tick time
ASoC: codecs: ES8326: solve hp and button detect issue
ASoC: rt5645: mic-in detection threshold modification
ASoC: Intel: sof_sdw_rt_sdca_jack_common: Use name_prefix for `-sdca` detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is one remaining bugfix for 6.10-rc1 that missed the 6.9-final
merge window, and has been sitting in my tree and linux-next for quite
a while now, but wasn't sent to you (my fault, travels...)
It is a bugfix to resolve an error in the speakup code that could
overflow a buffer.
It has been in linux-next for a while with no reported problems"
* tag 'char-misc-6.10-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
speakup: Fix sizeof() vs ARRAY_SIZE() bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and Serial driver fixes that missed the
6.9-final merge window, but have been in my tree for weeks (my fault,
travel caused me to miss this)
These fixes include:
- more n_gsm fixes for reported problems
- 8520_mtk driver fix
- 8250_bcm7271 driver fix
- sc16is7xx driver fix
All of these have been in linux-next for weeks without any reported
problems"
* tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescaler
serial: 8250_bcm7271: use default_mux_rate if possible
serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeup
tty: n_gsm: fix missing receive state reset after mode switch
tty: n_gsm: fix possible out-of-bounds in gsm0_receive()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module
decompression (Stephen Boyd)
- ubsan: Restore dependency on ARCH_HAS_UBSAN
- kunit/fortify: Fix memcmp() test to be amplitude agnostic
* tag 'hardening-v6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kunit/fortify: Fix memcmp() test to be amplitude agnostic
ubsan: Restore dependency on ARCH_HAS_UBSAN
loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module decompression
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs/eventfs updates from Steven Rostedt:
"Bug fixes:
- The eventfs directories need to have unique inode numbers. Make
sure that they do not get the default file inode number.
- Update the inode uid and gid fields on remount.
When a remount happens where a uid and/or gid is specified, all the
tracefs files and directories should get the specified uid and/or
gid. But this can be sporadic when some uids were assigned already.
There's already a list of inodes that are allocated. Just update
their uid and gid fields at the time of remount.
- Update the eventfs_inodes on remount from the top level "events"
descriptor.
There was a bug where not all the eventfs files or directories
where getting updated on remount. One fix was to clear the
SAVED_UID/GID flags from the inode list during the iteration of the
inodes during the remount. But because the eventfs inodes can be
freed when the last referenced is released, not all the
eventfs_inodes were being updated. This lead to the ownership
selftest to fail if it was run a second time (the first time would
leave eventfs_inodes with no corresponding tracefs_inode).
Instead, for eventfs_inodes, only process the "events"
eventfs_inode from the list iteration, as it is guaranteed to have
a tracefs_inode (it's never freed while the "events" directory
exists). As it has a list of its children, and the children have a
list of their children, just iterate all the eventfs_inodes from
the "events" descriptor and it is guaranteed to get all of them.
- Clear the EVENT_INODE flag from the tracefs_drop_inode() callback.
Currently the EVENTFS_INODE FLAG is cleared in the tracefs_d_iput()
callback. But this is the wrong location. The iput() callback is
called when the last reference to the dentry inode is hit. There
could be a case where two dentry's have the same inode, and the
flag will be cleared prematurely. The flag needs to be cleared when
the last reference of the inode is dropped and that happens in the
inode's drop_inode() callback handler.
Cleanups:
- Consolidate the creation of a tracefs_inode for an eventfs_inode
A tracefs_inode is created for both files and directories of the
eventfs system. It is open coded. Instead, consolidate it into a
single eventfs_get_inode() function call.
- Remove the eventfs getattr and permission callbacks.
The permissions for the eventfs files and directories are updated
when the inodes are created, on remount, and when the user sets
them (via setattr). The inodes hold the current permissions so
there is no need to have custom getattr or permissions callbacks as
they will more likely cause them to be incorrect. The inode's
permissions are updated when they should be updated. Remove the
getattr and permissions inode callbacks.
- Do not update eventfs_inode attributes on creation of inodes.
The eventfs_inodes attribute field is used to store the permissions
of the directories and files for when their corresponding inodes
are freed and are created again. But when the creation of the
inodes happen, the eventfs_inode attributes are recalculated. The
recalculation should only happen when the permissions change for a
given file or directory. Currently, the attribute changes are just
being set to their current files so this is not a bug, but it's
unnecessary and error prone. Stop doing that.
- The events directory inode is created once when the events
directory is created and deleted when it is deleted. It is now
updated on remount and when the user changes the permissions.
There's no need to use the eventfs_inode of the events directory to
store the events directory permissions. But using it to store the
default permissions for the files within the directory that have
not been updated by the user can simplify the code"
* tag 'trace-tracefs-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Do not use attributes for events directory
eventfs: Cleanup permissions in creation of inodes
eventfs: Remove getattr and permission callbacks
eventfs: Consolidate the eventfs_inode update in eventfs_get_inode()
tracefs: Clear EVENT_INODE flag in tracefs_drop_inode()
eventfs: Update all the eventfs_inodes from the events descriptor
tracefs: Update inode permissions on remount
eventfs: Keep the directories from having the same inode number as files
|
|
err is a 32-bit integer, but elf_update returns an off_t, which is 64-bit
at least on 64-bit platforms. If symbols_patch is called on a binary between
2-4GB in size, the result will be negative when cast to a 32-bit integer,
which the code assumes means an error occurred. This can wrongly trigger
build failures when building very large kernel images.
Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240514070931.199694-1-friedrich.vock@gmx.de
|
|
Since commit a6aa8fca4d79 ("dma-buf/sw-sync: Reduce irqsave/irqrestore from
known context") by error replaced spin_unlock_irqrestore() with
spin_unlock_irq() for both sync_debugfs_show() and sync_print_obj() despite
sync_print_obj() is called from sync_debugfs_show(), lockdep complains
inconsistent lock state warning.
Use plain spin_{lock,unlock}() for sync_print_obj(), for
sync_debugfs_show() is already using spin_{lock,unlock}_irq().
Reported-by: syzbot <syzbot+a225ee3df7e7f9372dbe@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=a225ee3df7e7f9372dbe
Fixes: a6aa8fca4d79 ("dma-buf/sw-sync: Reduce irqsave/irqrestore from known context")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c2e46020-aaa6-4e06-bf73-f05823f913f0@I-love.SAKURA.ne.jp
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Tariq Toukan says:
====================
mlx5 fixes 24-05-22
This patchset provides bug fixes to mlx5 core and Eth drivers.
Series generated against:
commit 9c91c7fadb17 ("net: mana: Fix the extra HZ in mana_hwc_send_request")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the skb is encapsulated, adjust the inner UDP header instead of the
outer one, and account for UDP header (instead of TCP) in the inline
header size calculation.
Fixes: 689adf0d4892 ("net/mlx5e: Add UDP GSO support")
Reported-by: Jason Baron <jbaron@akamai.com>
Closes: https://lore.kernel.org/netdev/c42961cb-50b9-4a9a-bd43-87fe48d88d29@akamai.com/
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
exhaustion
Previously, the driver incorrectly used rx_dropped to report device
buffer exhaustion.
According to the documentation, rx_dropped should not be used to count
packets dropped due to buffer exhaustion, which is the purpose of
rx_missed_errors.
Use rx_missed_errors as intended for counting packets dropped due to
buffer exhaustion.
Fixes: 269e6b3af3bf ("net/mlx5e: Report additional error statistics in get stats ndo")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ptp channel instance is only initialized when ptp traffic is first
processed by the driver. This means that there is a window in between when
port timestamping is enabled and ptp traffic is sent where the ptp channel
instance is not initialized. Accessing statistics during this window will
lead to an access violation (NULL + member offset). Check the validity of
the instance before attempting to query statistics.
BUG: unable to handle page fault for address: 0000000000003524
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 109dfc067 P4D 109dfc067 PUD 1064ef067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 420 Comm: ethtool Not tainted 6.9.0-rc2-rrameshbabu+ #245
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/204
RIP: 0010:mlx5e_stats_ts_get+0x4c/0x130
<snip>
Call Trace:
<TASK>
? show_regs+0x60/0x70
? __die+0x24/0x70
? page_fault_oops+0x15f/0x430
? do_user_addr_fault+0x2c9/0x5c0
? exc_page_fault+0x63/0x110
? asm_exc_page_fault+0x27/0x30
? mlx5e_stats_ts_get+0x4c/0x130
? mlx5e_stats_ts_get+0x20/0x130
mlx5e_get_ts_stats+0x15/0x20
<snip>
Fixes: 3579032c08c1 ("net/mlx5e: Implement ethtool hardware timestamping statistics")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove faulty check disabling checksum offload and GSO for offload of
simple IPsec tunnel L4 traffic. Comment previously describing the deleted
code incorrectly claimed the check prevented double tunnel (or three layers
of ip headers).
Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rx_create no longer allocates a modify_hdr instance that needs to be
cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer
dereference. A leak in the rules also previously occurred since there are
now two rules populated related to status.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 109907067 P4D 109907067 PUD 116890067 PMD 0
Oops: 0000 [#1] SMP
CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70
<snip>
Call Trace:
<TASK>
? show_regs+0x60/0x70
? __die+0x24/0x70
? page_fault_oops+0x15f/0x430
? free_to_partial_list.constprop.0+0x79/0x150
? do_user_addr_fault+0x2c9/0x5c0
? exc_page_fault+0x63/0x110
? asm_exc_page_fault+0x27/0x30
? mlx5_modify_header_dealloc+0xd/0x70
rx_create+0x374/0x590
rx_add_rule+0x3ad/0x500
? rx_add_rule+0x3ad/0x500
? mlx5_cmd_exec+0x2c/0x40
? mlx5_create_ipsec_obj+0xd6/0x200
mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0
mlx5e_xfrm_add_state+0x426/0xc00
<snip>
Fixes: 94af50c0a9bb ("net/mlx5e: Unify esw and normal IPsec status table creation/destruction")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MTMP register (0x900a) capability offset is off-by-one, move it to
the right place.
Fixes: 1f507e80c700 ("net/mlx5: Expose NIC temperature via hardware monitoring kernel API")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A proper query to MPIR needs to set the correct value in the depth field.
On embedded CPU this value is not necessarily zero. As there is no real
use case for multi-PF netdev on the embedded CPU of the smart NIC, block
this option.
This fixes the following failure:
ACCESS_REG(0x805) op_mod(0x1) failed, status bad system state(0x4), syndrome (0x685f19), err(-5)
Fixes: 678eb448055a ("net/mlx5: SD, Implement basic query and instantiation")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the driver does not enforce that lag bond slaves must have
matching roce capabilities. Yet, in mlx5_do_bond(), the driver attempts
to enable roce on all vports of the bond slaves, causing the following
syndrome when one slave has no roce fw support:
mlx5_cmd_out_err:809:(pid 25427): MODIFY_NIC_VPORT_CONTEXT(0×755) op_mod(0×0)
failed, status bad parameter(0×3), syndrome (0xc1f678), err(-22)
Thus, create HW lag only if bond's slaves agree on roce state,
either all slaves have roce support resulting in a roce lag bond,
or none do, resulting in a raw eth bond.
Fixes: 7907f23adc18 ("net/mlx5: Implement RoCE LAG feature")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Otherwise we can cause spurious EBUSY issues when trying to mount the
rootfs later on.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218845
Reported-by: Petri Kaukasoina <petri.kaukasoina@tuni.fi>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix netfs_perform_write() to set BDP_ASYNC if IOCB_NOWAIT is set rather
than if IOCB_SYNC is not set. It reflects asynchronicity in the sense of
not waiting rather than synchronicity in the sense of not returning until
the op is complete.
Without this, generic/590 fails on cifs in strict caching mode with a
complaint that one of the writes fails with EAGAIN. The test can be
distilled down to:
mount -t cifs /my/share /mnt -ostuff
xfs_io -i -c 'falloc 0 8191M -c fsync -f /mnt/file
xfs_io -i -c 'pwrite -b 1M -W 0 8191M' /mnt/file
Fixes: c38f4e96e605 ("netfs: Provide func to copy data to pagecache for buffered write")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/316306.1716306586@warthog.procyon.org.uk
Reviewed-by: Jens Axboe <axboe@kernel.dk>
cc: Jeff Layton <jlayton@kernel.org>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit fbe38120eb1d ("signalfd: convert to ->read_iter()") removed the
call to anon_inode_getfd() by splitting fd setup into two parts. Drop the
comment referencing the internal details of that function.
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://lore.kernel.org/r/20240520090819.76342-2-pchelkin@ispras.ru
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If anon_inode_getfile() fails, return appropriate error code. This looks
like a single typo: the similar code changes in timerfd and userfaultfd
are okay.
Found by Linux Verification Center (linuxtesting.org).
Fixes: fbe38120eb1d ("signalfd: convert to ->read_iter()")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://lore.kernel.org/r/20240520090819.76342-1-pchelkin@ispras.ru
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since commit (5d8edfb900d5 "iomap: Copy larger chunks from userspace"),
iomap will try to copy in larger chunks than PAGE_SIZE. However, if the
mapping doesn't support large folio, only one page of maximum 4KB will
be created and 4KB data will be writen to pagecache each time. Then,
next 4KB will be handled in next iteration. This will cause potential
write performance problem.
If chunk is 2MB, total 512 pages need to be handled finally. During this
period, fault_in_iov_iter_readable() is called to check iov_iter readable
validity. Since only 4KB will be handled each time, below address space
will be checked over and over again:
start end
-
buf, buf+2MB
buf+4KB, buf+2MB
buf+8KB, buf+2MB
...
buf+2044KB buf+2MB
Obviously the checking size is wrong since only 4KB will be handled each
time. So this will get a correct chunk to let iomap work well in non-large
folio case.
With this change, the write speed will be stable. Tested on ARM64 device.
Before:
- dd if=/dev/zero of=/dev/sda bs=400K count=10485 (334 MB/s)
- dd if=/dev/zero of=/dev/sda bs=800K count=5242 (278 MB/s)
- dd if=/dev/zero of=/dev/sda bs=1600K count=2621 (204 MB/s)
- dd if=/dev/zero of=/dev/sda bs=2200K count=1906 (170 MB/s)
- dd if=/dev/zero of=/dev/sda bs=3000K count=1398 (150 MB/s)
- dd if=/dev/zero of=/dev/sda bs=4500K count=932 (139 MB/s)
After:
- dd if=/dev/zero of=/dev/sda bs=400K count=10485 (339 MB/s)
- dd if=/dev/zero of=/dev/sda bs=800K count=5242 (330 MB/s)
- dd if=/dev/zero of=/dev/sda bs=1600K count=2621 (332 MB/s)
- dd if=/dev/zero of=/dev/sda bs=2200K count=1906 (333 MB/s)
- dd if=/dev/zero of=/dev/sda bs=3000K count=1398 (333 MB/s)
- dd if=/dev/zero of=/dev/sda bs=4500K count=932 (333 MB/s)
Fixes: 5d8edfb900d5 ("iomap: Copy larger chunks from userspace")
Cc: stable@vger.kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240521114939.2541461-2-xu.yang_2@nxp.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add mapping_max_folio_size() to get the maximum folio size for this
pagecache mapping.
Fixes: 5d8edfb900d5 ("iomap: Copy larger chunks from userspace")
Cc: stable@vger.kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240521114939.2541461-1-xu.yang_2@nxp.com
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If an error occurs whilst we're doing an AIO write in write-through mode,
we may end up calling ->ki_complete() *and* returning an error from
->write_iter(). This can result in either a UAF (the ->ki_complete() func
pointer may get overwritten, for example) or a refcount underflow in
io_submit() as ->ki_complete is called twice.
Fix this by making netfs_end_writethrough() - and thus
netfs_perform_write() - unconditionally return -EIOCBQUEUED if we're doing
an AIO write and wait for completion if we're not.
Fixes: 288ace2f57c9 ("netfs: New writeback implementation")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/295052.1716298587@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This can be triggered by mounting a cifs filesystem with a cache=strict
mount option and then, using the fsx program from xfstests, doing:
ltp/fsx -A -d -N 1000 -S 11463 -P /tmp /cifs-mount/foo \
--replay-ops=gen112-fsxops
Where gen112-fsxops holds:
fallocate 0x6be7 0x8fc5 0x377d3
copy_range 0x9c71 0x77e8 0x2edaf 0x377d3
write 0x2776d 0x8f65 0x377d3
The problem is that netfs_io_request::len is being used for two purposes
and ends up getting set to the amount of data we transferred, not the
amount of data the caller asked to be transferred (for various reasons,
such as mmap'd writes, we might end up rounding out the data written to the
server to include the entire folio at each end).
Fix this by keeping the amount we were asked to write in ->len and using
->submitted to track what we issued ops for. Then, when we come to calling
->ki_complete(), ->len is the right size.
This also required netfs_cleanup_dio_write() to change since we're no
longer advancing wreq->len. Use wreq->transferred instead as we might have
done a short read.
With this, the generic/112 xfstest passes if cifs is forced to put all
non-DIO opens into write-through mode.
Fixes: 288ace2f57c9 ("netfs: New writeback implementation")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/295086.1716298663@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: Steve French <stfrench@microsoft.com>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Following a similar reinstate for the KSZ8081 and KSZ9031.
Older kernels would use the genphy_soft_reset if the PHY did not implement
a .soft_reset.
The KSZ8061 errata described here:
https://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8061-Errata-DS80000688B.pdf
and worked around with 232ba3a51c ("net: phy: Micrel KSZ8061: link failure after cable connect")
is back again without this soft reset.
Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Tested-by: Karim Ben Houcine <karim.benhoucine@landisgyr.com>
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
irq_find_at_or_after() dereferences the interrupt descriptor which is
returned by mt_find() while neither holding sparse_irq_lock nor RCU read
lock, which means the descriptor can be freed between mt_find() and the
dereference:
CPU0 CPU1
desc = mt_find()
delayed_free_desc(desc)
irq_desc_get_irq(desc)
The use-after-free is reported by KASAN:
Call trace:
irq_get_next_irq+0x58/0x84
show_stat+0x638/0x824
seq_read_iter+0x158/0x4ec
proc_reg_read_iter+0x94/0x12c
vfs_read+0x1e0/0x2c8
Freed by task 4471:
slab_free_freelist_hook+0x174/0x1e0
__kmem_cache_free+0xa4/0x1dc
kfree+0x64/0x128
irq_kobj_release+0x28/0x3c
kobject_put+0xcc/0x1e0
delayed_free_desc+0x14/0x2c
rcu_do_batch+0x214/0x720
Guard the access with a RCU read lock section.
Fixes: 721255b9826b ("genirq: Use a maple tree for interrupt descriptor management")
Signed-off-by: dicken.ding <dicken.ding@mediatek.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240524091739.31611-1-dicken.ding@mediatek.com
|
|
If we somehow attempt to read beyond the directory size, an error
is supposed to be returned.
However, in some cases, read requests do not stop and instead enter
into a loop.
To avoid this, we set the position in the directory to the end.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org
|
|
In most cases when adding a cluster to the directory index,
they are placed at the end, and in the bitmap, this cluster corresponds
to the last bit. The new directory size is calculated as follows:
data_size = (u64)(bit + 1) << indx->index_bits;
In the case of reusing a non-final cluster from the index,
data_size is calculated incorrectly, resulting in the directory size
differing from the actual size.
A check for cluster reuse has been added, and the size update is skipped.
Fixes: 82cae269cfa95 ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: stable@vger.kernel.org
|
|
The implicit conversion from unsigned int to enum
proc_cn_event is invalid, so explicitly cast it
for compilation in a C++ compiler.
/usr/include/linux/cn_proc.h: In function 'proc_cn_event valid_event(proc_cn_event)':
/usr/include/linux/cn_proc.h:72:17: error: invalid conversion from 'unsigned int' to 'proc_cn_event' [-fpermissive]
72 | ev_type &= PROC_EVENT_ALL;
| ^
| |
| unsigned int
Signed-off-by: Matt Jan <zoo868e@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sealing read-only of elf mapping so it can't be changed by mprotect.
[jeffxu@chromium.org: style change]
Link: https://lkml.kernel.org/r/20240416220944.2481203-2-jeffxu@chromium.org
[amer.shanawany@gmail.com: fix linker error for inline function]
Link: https://lkml.kernel.org/r/20240420202346.546444-1-amer.shanawany@gmail.com
[jeffxu@chromium.org: fix compile warning]
Link: https://lkml.kernel.org/r/20240420003515.345982-2-jeffxu@chromium.org
[jeffxu@chromium.org: fix arm build]
Link: https://lkml.kernel.org/r/20240502225331.3806279-2-jeffxu@chromium.org
Link: https://lkml.kernel.org/r/20240415163527.626541-6-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Signed-off-by: Amer Al Shanawany <amer.shanawany@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add documentation for mseal().
Link: https://lkml.kernel.org/r/20240415163527.626541-5-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
selftest for memory sealing change in mmap() and mseal().
Link: https://lkml.kernel.org/r/20240415163527.626541-4-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The new mseal() is an syscall on 64 bit CPU, and with following signature:
int mseal(void addr, size_t len, unsigned long flags)
addr/len: memory range.
flags: reserved.
mseal() blocks following operations for the given memory range.
1> Unmapping, moving to another location, and shrinking the size,
via munmap() and mremap(), can leave an empty space, therefore can
be replaced with a VMA with a new set of attributes.
2> Moving or expanding a different VMA into the current location,
via mremap().
3> Modifying a VMA via mmap(MAP_FIXED).
4> Size expansion, via mremap(), does not appear to pose any specific
risks to sealed VMAs. It is included anyway because the use case is
unclear. In any case, users can rely on merging to expand a sealed VMA.
5> mprotect() and pkey_mprotect().
6> Some destructive madvice() behaviors (e.g. MADV_DONTNEED) for anonymous
memory, when users don't have write permission to the memory. Those
behaviors can alter region contents by discarding pages, effectively a
memset(0) for anonymous memory.
Following input during RFC are incooperated into this patch:
Jann Horn: raising awareness and providing valuable insights on the
destructive madvise operations.
Linus Torvalds: assisting in defining system call signature and scope.
Liam R. Howlett: perf optimization.
Theo de Raadt: sharing the experiences and insight gained from
implementing mimmutable() in OpenBSD.
Finally, the idea that inspired this patch comes from Stephen Röttger's
work in Chrome V8 CFI.
[jeffxu@chromium.org: add branch prediction hint, per Pedro]
Link: https://lkml.kernel.org/r/20240423192825.1273679-2-jeffxu@chromium.org
Link: https://lkml.kernel.org/r/20240415163527.626541-3-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Introduce mseal", v10.
This patchset proposes a new mseal() syscall for the Linux kernel.
In a nutshell, mseal() protects the VMAs of a given virtual memory range
against modifications, such as changes to their permission bits.
Modern CPUs support memory permissions, such as the read/write (RW) and
no-execute (NX) bits. Linux has supported NX since the release of kernel
version 2.6.8 in August 2004 [1]. The memory permission feature improves
the security stance on memory corruption bugs, as an attacker cannot
simply write to arbitrary memory and point the code to it. The memory
must be marked with the X bit, or else an exception will occur.
Internally, the kernel maintains the memory permissions in a data
structure called VMA (vm_area_struct). mseal() additionally protects the
VMA itself against modifications of the selected seal type.
Memory sealing is useful to mitigate memory corruption issues where a
corrupted pointer is passed to a memory management system. For example,
such an attacker primitive can break control-flow integrity guarantees
since read-only memory that is supposed to be trusted can become writable
or .text pages can get remapped. Memory sealing can automatically be
applied by the runtime loader to seal .text and .rodata pages and
applications can additionally seal security critical data at runtime. A
similar feature already exists in the XNU kernel with the
VM_FLAGS_PERMANENT [3] flag and on OpenBSD with the mimmutable syscall
[4]. Also, Chrome wants to adopt this feature for their CFI work [2] and
this patchset has been designed to be compatible with the Chrome use case.
Two system calls are involved in sealing the map: mmap() and mseal().
The new mseal() is an syscall on 64 bit CPU, and with following signature:
int mseal(void addr, size_t len, unsigned long flags)
addr/len: memory range.
flags: reserved.
mseal() blocks following operations for the given memory range.
1> Unmapping, moving to another location, and shrinking the size,
via munmap() and mremap(), can leave an empty space, therefore can
be replaced with a VMA with a new set of attributes.
2> Moving or expanding a different VMA into the current location,
via mremap().
3> Modifying a VMA via mmap(MAP_FIXED).
4> Size expansion, via mremap(), does not appear to pose any specific
risks to sealed VMAs. It is included anyway because the use case is
unclear. In any case, users can rely on merging to expand a sealed VMA.
5> mprotect() and pkey_mprotect().
6> Some destructive madvice() behaviors (e.g. MADV_DONTNEED) for anonymous
memory, when users don't have write permission to the memory. Those
behaviors can alter region contents by discarding pages, effectively a
memset(0) for anonymous memory.
The idea that inspired this patch comes from Stephen Röttger’s work in
V8 CFI [5]. Chrome browser in ChromeOS will be the first user of this
API.
Indeed, the Chrome browser has very specific requirements for sealing,
which are distinct from those of most applications. For example, in the
case of libc, sealing is only applied to read-only (RO) or read-execute
(RX) memory segments (such as .text and .RELRO) to prevent them from
becoming writable, the lifetime of those mappings are tied to the lifetime
of the process.
Chrome wants to seal two large address space reservations that are managed
by different allocators. The memory is mapped RW- and RWX respectively
but write access to it is restricted using pkeys (or in the future ARM
permission overlay extensions). The lifetime of those mappings are not
tied to the lifetime of the process, therefore, while the memory is
sealed, the allocators still need to free or discard the unused memory.
For example, with madvise(DONTNEED).
However, always allowing madvise(DONTNEED) on this range poses a security
risk. For example if a jump instruction crosses a page boundary and the
second page gets discarded, it will overwrite the target bytes with zeros
and change the control flow. Checking write-permission before the discard
operation allows us to control when the operation is valid. In this case,
the madvise will only succeed if the executing thread has PKEY write
permissions and PKRU changes are protected in software by control-flow
integrity.
Although the initial version of this patch series is targeting the Chrome
browser as its first user, it became evident during upstream discussions
that we would also want to ensure that the patch set eventually is a
complete solution for memory sealing and compatible with other use cases.
The specific scenario currently in mind is glibc's use case of loading and
sealing ELF executables. To this end, Stephen is working on a change to
glibc to add sealing support to the dynamic linker, which will seal all
non-writable segments at startup. Once this work is completed, all
applications will be able to automatically benefit from these new
protections.
In closing, I would like to formally acknowledge the valuable
contributions received during the RFC process, which were instrumental in
shaping this patch:
Jann Horn: raising awareness and providing valuable insights on the
destructive madvise operations.
Liam R. Howlett: perf optimization.
Linus Torvalds: assisting in defining system call signature and scope.
Theo de Raadt: sharing the experiences and insight gained from
implementing mimmutable() in OpenBSD.
MM perf benchmarks
==================
This patch adds a loop in the mprotect/munmap/madvise(DONTNEED) to
check the VMAs’ sealing flag, so that no partial update can be made,
when any segment within the given memory range is sealed.
To measure the performance impact of this loop, two tests are developed.
[8]
The first is measuring the time taken for a particular system call,
by using clock_gettime(CLOCK_MONOTONIC). The second is using
PERF_COUNT_HW_REF_CPU_CYCLES (exclude user space). Both tests have
similar results.
The tests have roughly below sequence:
for (i = 0; i < 1000, i++)
create 1000 mappings (1 page per VMA)
start the sampling
for (j = 0; j < 1000, j++)
mprotect one mapping
stop and save the sample
delete 1000 mappings
calculates all samples.
Below tests are performed on Intel(R) Pentium(R) Gold 7505 @ 2.00GHz,
4G memory, Chromebook.
Based on the latest upstream code:
The first test (measuring time)
syscall__ vmas t t_mseal delta_ns per_vma %
munmap__ 1 909 944 35 35 104%
munmap__ 2 1398 1502 104 52 107%
munmap__ 4 2444 2594 149 37 106%
munmap__ 8 4029 4323 293 37 107%
munmap__ 16 6647 6935 288 18 104%
munmap__ 32 11811 12398 587 18 105%
mprotect 1 439 465 26 26 106%
mprotect 2 1659 1745 86 43 105%
mprotect 4 3747 3889 142 36 104%
mprotect 8 6755 6969 215 27 103%
mprotect 16 13748 14144 396 25 103%
mprotect 32 27827 28969 1142 36 104%
madvise_ 1 240 262 22 22 109%
madvise_ 2 366 442 76 38 121%
madvise_ 4 623 751 128 32 121%
madvise_ 8 1110 1324 215 27 119%
madvise_ 16 2127 2451 324 20 115%
madvise_ 32 4109 4642 534 17 113%
The second test (measuring cpu cycle)
syscall__ vmas cpu cmseal delta_cpu per_vma %
munmap__ 1 1790 1890 100 100 106%
munmap__ 2 2819 3033 214 107 108%
munmap__ 4 4959 5271 312 78 106%
munmap__ 8 8262 8745 483 60 106%
munmap__ 16 13099 14116 1017 64 108%
munmap__ 32 23221 24785 1565 49 107%
mprotect 1 906 967 62 62 107%
mprotect 2 3019 3203 184 92 106%
mprotect 4 6149 6569 420 105 107%
mprotect 8 9978 10524 545 68 105%
mprotect 16 20448 21427 979 61 105%
mprotect 32 40972 42935 1963 61 105%
madvise_ 1 434 497 63 63 115%
madvise_ 2 752 899 147 74 120%
madvise_ 4 1313 1513 200 50 115%
madvise_ 8 2271 2627 356 44 116%
madvise_ 16 4312 4883 571 36 113%
madvise_ 32 8376 9319 943 29 111%
Based on the result, for 6.8 kernel, sealing check adds
20-40 nano seconds, or around 50-100 CPU cycles, per VMA.
In addition, I applied the sealing to 5.10 kernel:
The first test (measuring time)
syscall__ vmas t tmseal delta_ns per_vma %
munmap__ 1 357 390 33 33 109%
munmap__ 2 442 463 21 11 105%
munmap__ 4 614 634 20 5 103%
munmap__ 8 1017 1137 120 15 112%
munmap__ 16 1889 2153 263 16 114%
munmap__ 32 4109 4088 -21 -1 99%
mprotect 1 235 227 -7 -7 97%
mprotect 2 495 464 -30 -15 94%
mprotect 4 741 764 24 6 103%
mprotect 8 1434 1437 2 0 100%
mprotect 16 2958 2991 33 2 101%
mprotect 32 6431 6608 177 6 103%
madvise_ 1 191 208 16 16 109%
madvise_ 2 300 324 24 12 108%
madvise_ 4 450 473 23 6 105%
madvise_ 8 753 806 53 7 107%
madvise_ 16 1467 1592 125 8 108%
madvise_ 32 2795 3405 610 19 122%
The second test (measuring cpu cycle)
syscall__ nbr_vma cpu cmseal delta_cpu per_vma %
munmap__ 1 684 715 31 31 105%
munmap__ 2 861 898 38 19 104%
munmap__ 4 1183 1235 51 13 104%
munmap__ 8 1999 2045 46 6 102%
munmap__ 16 3839 3816 -23 -1 99%
munmap__ 32 7672 7887 216 7 103%
mprotect 1 397 443 46 46 112%
mprotect 2 738 788 50 25 107%
mprotect 4 1221 1256 35 9 103%
mprotect 8 2356 2429 72 9 103%
mprotect 16 4961 4935 -26 -2 99%
mprotect 32 9882 10172 291 9 103%
madvise_ 1 351 380 29 29 108%
madvise_ 2 565 615 49 25 109%
madvise_ 4 872 933 61 15 107%
madvise_ 8 1508 1640 132 16 109%
madvise_ 16 3078 3323 245 15 108%
madvise_ 32 5893 6704 811 25 114%
For 5.10 kernel, sealing check adds 0-15 ns in time, or 10-30
CPU cycles, there is even decrease in some cases.
It might be interesting to compare 5.10 and 6.8 kernel
The first test (measuring time)
syscall__ vmas t_5_10 t_6_8 delta_ns per_vma %
munmap__ 1 357 909 552 552 254%
munmap__ 2 442 1398 956 478 316%
munmap__ 4 614 2444 1830 458 398%
munmap__ 8 1017 4029 3012 377 396%
munmap__ 16 1889 6647 4758 297 352%
munmap__ 32 4109 11811 7702 241 287%
mprotect 1 235 439 204 204 187%
mprotect 2 495 1659 1164 582 335%
mprotect 4 741 3747 3006 752 506%
mprotect 8 1434 6755 5320 665 471%
mprotect 16 2958 13748 10790 674 465%
mprotect 32 6431 27827 21397 669 433%
madvise_ 1 191 240 49 49 125%
madvise_ 2 300 366 67 33 122%
madvise_ 4 450 623 173 43 138%
madvise_ 8 753 1110 357 45 147%
madvise_ 16 1467 2127 660 41 145%
madvise_ 32 2795 4109 1314 41 147%
The second test (measuring cpu cycle)
syscall__ vmas cpu_5_10 c_6_8 delta_cpu per_vma %
munmap__ 1 684 1790 1106 1106 262%
munmap__ 2 861 2819 1958 979 327%
munmap__ 4 1183 4959 3776 944 419%
munmap__ 8 1999 8262 6263 783 413%
munmap__ 16 3839 13099 9260 579 341%
munmap__ 32 7672 23221 15549 486 303%
mprotect 1 397 906 509 509 228%
mprotect 2 738 3019 2281 1140 409%
mprotect 4 1221 6149 4929 1232 504%
mprotect 8 2356 9978 7622 953 423%
mprotect 16 4961 20448 15487 968 412%
mprotect 32 9882 40972 31091 972 415%
madvise_ 1 351 434 82 82 123%
madvise_ 2 565 752 186 93 133%
madvise_ 4 872 1313 442 110 151%
madvise_ 8 1508 2271 763 95 151%
madvise_ 16 3078 4312 1234 77 140%
madvise_ 32 5893 8376 2483 78 142%
From 5.10 to 6.8
munmap: added 250-550 ns in time, or 500-1100 in cpu cycle, per vma.
mprotect: added 200-750 ns in time, or 500-1200 in cpu cycle, per vma.
madvise: added 33-50 ns in time, or 70-110 in cpu cycle, per vma.
In comparison to mseal, which adds 20-40 ns or 50-100 CPU cycles, the
increase from 5.10 to 6.8 is significantly larger, approximately ten times
greater for munmap and mprotect.
When I discuss the mm performance with Brian Makin, an engineer who worked
on performance, it was brought to my attention that such performance
benchmarks, which measuring millions of mm syscall in a tight loop, may
not accurately reflect real-world scenarios, such as that of a database
service. Also this is tested using a single HW and ChromeOS, the data
from another HW or distribution might be different. It might be best to
take this data with a grain of salt.
This patch (of 5):
Wire up mseal syscall for all architectures.
Link: https://lkml.kernel.org/r/20240415163527.626541-1-jeffxu@chromium.org
Link: https://lkml.kernel.org/r/20240415163527.626541-2-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com> [Bug #2]
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Recent changes made uprobe_cpu_buffer preparation lazy, and moved it
deeper into __uprobe_trace_func(). This is problematic because
__uprobe_trace_func() is called inside rcu_read_lock()/rcu_read_unlock()
block, which then calls prepare_uprobe_buffer() -> uprobe_buffer_get() ->
mutex_lock(&ucb->mutex), leading to a splat about using mutex under
non-sleepable RCU:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 98231, name: stress-ng-sigq
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
...
Call Trace:
<TASK>
dump_stack_lvl+0x3d/0xe0
__might_resched+0x24c/0x270
? prepare_uprobe_buffer+0xd5/0x1d0
__mutex_lock+0x41/0x820
? ___perf_sw_event+0x206/0x290
? __perf_event_task_sched_in+0x54/0x660
? __perf_event_task_sched_in+0x54/0x660
prepare_uprobe_buffer+0xd5/0x1d0
__uprobe_trace_func+0x4a/0x140
uprobe_dispatcher+0x135/0x280
? uprobe_dispatcher+0x94/0x280
uprobe_notify_resume+0x650/0xec0
? atomic_notifier_call_chain+0x21/0x110
? atomic_notifier_call_chain+0xf8/0x110
irqentry_exit_to_user_mode+0xe2/0x1e0
asm_exc_int3+0x35/0x40
RIP: 0033:0x7f7e1d4da390
Code: 33 04 00 0f 1f 80 00 00 00 00 f3 0f 1e fa b9 01 00 00 00 e9 b2 fc ff ff 66 90 f3 0f 1e fa 31 c9 e9 a5 fc ff ff 0f 1f 44 00 00 <cc> 0f 1e fa b8 27 00 00 00 0f 05 c3 0f 1f 40 00 f3 0f 1e fa b8 6e
RSP: 002b:00007ffd2abc3608 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000076d325f1 RCX: 0000000000000000
RDX: 0000000076d325f1 RSI: 000000000000000a RDI: 00007ffd2abc3690
RBP: 000000000000000a R08: 00017fb700000000 R09: 00017fb700000000
R10: 00017fb700000000 R11: 0000000000000246 R12: 0000000000017ff2
R13: 00007ffd2abc3610 R14: 0000000000000000 R15: 00007ffd2abc3780
</TASK>
Luckily, it's easy to fix by moving prepare_uprobe_buffer() to be called
slightly earlier: into uprobe_trace_func() and uretprobe_trace_func(), outside
of RCU locked section. This still keeps this buffer preparation lazy and helps
avoid the overhead when it's not needed. E.g., if there is only BPF uprobe
handler installed on a given uprobe, buffer won't be initialized.
Note, the other user of prepare_uprobe_buffer(), __uprobe_perf_func(), is not
affected, as it doesn't prepare buffer under RCU read lock.
Link: https://lore.kernel.org/all/20240521053017.3708530-1-andrii@kernel.org/
Fixes: 1b8f85defbc8 ("uprobes: prepare uprobe args buffer lazily")
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
MST colorspace property support was disabled due to a series of warnings
that came up when the device was plugged in since the properties weren't
made at device creation. Create the properties in advance instead.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 69a959610229 ("drm/amd/display: Temporary Disable MST DP Colorspace Property").
Reported-and-tested-by: Tyler Schneider <tyler.schneider@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3353
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
hbm filed takes bit 13 and bit 14 in boot status.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull NFS client updates from Trond Myklebust:
"Stable fixes:
- nfs: fix undefined behavior in nfs_block_bits()
- NFSv4.2: Fix READ_PLUS when server doesn't support OP_READ_PLUS
Bugfixes:
- Fix mixing of the lock/nolock and local_lock mount options
- NFSv4: Fixup smatch warning for ambiguous return
- NFSv3: Fix remount when using the legacy binary mount api
- SUNRPC: Fix the handling of expired RPCSEC_GSS contexts
- SUNRPC: fix the NFSACL RPC retries when soft mounts are enabled
- rpcrdma: fix handling for RDMA_CM_EVENT_DEVICE_REMOVAL
Features and cleanups:
- NFSv3: Use the atomic_open API to fix open(O_CREAT|O_TRUNC)
- pNFS/filelayout: S layout segment range in LAYOUTGET
- pNFS: rework pnfs_generic_pg_check_layout to check IO range
- NFSv2: Turn off enabling of NFS v2 by default"
* tag 'nfs-for-6.10-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: fix undefined behavior in nfs_block_bits()
pNFS: rework pnfs_generic_pg_check_layout to check IO range
pNFS/filelayout: check layout segment range
pNFS/filelayout: fixup pNfs allocation modes
rpcrdma: fix handling for RDMA_CM_EVENT_DEVICE_REMOVAL
NFS: Don't enable NFS v2 by default
NFS: Fix READ_PLUS when server doesn't support OP_READ_PLUS
sunrpc: fix NFSACL RPC retry on soft mount
SUNRPC: fix handling expired GSS context
nfs: keep server info for remounts
NFSv4: Fixup smatch warning for ambiguous return
NFS: make sure lock/nolock overriding local_lock mount option
NFS: add atomic_open for NFSv3 to handle O_TRUNC correctly.
pNFS/filelayout: Specify the layout segment range in LAYOUTGET
pNFS/filelayout: Remove the whole file layout requirement
|
|
Pull more block updates from Jens Axboe:
"Followup block updates, mostly due to NVMe being a bit late to the
party. But nothing major in there, so not a big deal.
In detail, this contains:
- NVMe pull request via Keith:
- Fabrics connection retries (Daniel, Hannes)
- Fabrics logging enhancements (Tokunori)
- RDMA delete optimization (Sagi)
- ublk DMA alignment fix (me)
- null_blk sparse warning fixes (Bart)
- Discard support for brd (Keith)
- blk-cgroup list corruption fixes (Ming)
- blk-cgroup stat propagation fix (Waiman)
- Regression fix for plugging stall with md (Yu)
- Misc fixes or cleanups (David, Jeff, Justin)"
* tag 'block-6.10-20240523' of git://git.kernel.dk/linux: (24 commits)
null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'
blk-throttle: remove unused struct 'avg_latency_bucket'
block: fix lost bio for plug enabled bio based device
block: t10-pi: add MODULE_DESCRIPTION()
blk-mq: add helper for checking if one CPU is mapped to specified hctx
blk-cgroup: Properly propagate the iostat update up the hierarchy
blk-cgroup: fix list corruption from reorder of WRITE ->lqueued
blk-cgroup: fix list corruption from resetting io stat
cdrom: rearrange last_media_change check to avoid unintentional overflow
nbd: Fix signal handling
nbd: Remove a local variable from nbd_send_cmd()
nbd: Improve the documentation of the locking assumptions
nbd: Remove superfluous casts
nbd: Use NULL to represent a pointer
brd: implement discard support
null_blk: Fix two sparse warnings
ublk_drv: set DMA alignment mask to 3
nvme-rdma, nvme-tcp: include max reconnects for reconnect logging
nvmet-rdma: Avoid o(n^2) loop in delete_ctrl
nvme: do not retry authentication failures
...
|
|
When disabling an nvmet namespace, there is a period where the
subsys->lock is released, as the ns disable waits for backend IO to
complete, and the ns percpu ref to be properly killed. The original
intent was to avoid taking the subsystem lock for a prolong period as
other processes may need to acquire it (for example new incoming
connections).
However, it opens up a window where another process may come in and
enable the ns, (re)intiailizing the ns percpu_ref, causing the disable
sequence to hang.
Solve this by taking the global nvmet_config_sem over the entire configfs
enable/disable sequence.
Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
There are io stats accounting that needs to be handled, so don't call
blk_mq_end_request() directly. Use the existing nvme_end_req() helper
that already handles everything.
Fixes: d4d957b53d91ee ("nvme-multipath: support io stats on the mpath device")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Batched completions were missing the io stats accounting and bio trace
events. Move the common code to a helper and call it from the batched
and non-batched functions.
Fixes: d4d957b53d91ee ("nvme-multipath: support io stats on the mpath device")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull io_uring fixes from Jens Axboe:
"Single fix here for a regression in 6.9, and then a simple cleanup
removing some dead code"
* tag 'io_uring-6.10-20240523' of git://git.kernel.dk/linux:
io_uring: remove checks for NULL 'sq_offset'
io_uring/sqpoll: ensure that normal task_work is also run timely
|
