summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-20USB: qmi_wwan: Add ZTE (Vodafone) K3520-ZAndrew Bird (Sphere Systems)
Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20USB: qmi_wwan: Add ZTE (Vodafone) K3765-ZAndrew Bird (Sphere Systems)
Add the ZTE (Vodafone) K3765-Z to the whitelist. This requires the previous patch to make the whitelist with forced interface 4 generic or the device fails to initialise. After applying this patch and loading the Option driver without usb-modeswitch's bind all interfaces trick, a wwan0 net interface and /dev/cdc-wdm0 device file were created. Using Bjorn Mork's perl connection script a connection was made to a mobile network using QMI and the network interface's IPv4 address was configured OK. Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20USB: qmi_wwan: Make forced int 4 whitelist genericAndrew Bird (Sphere Systems)
Change the forced interface 4 whitelist to use the generic shared binder instead of the Gobi specific one. Certain ZTE devices (K3520-Z & K3765-Z) don't work with the Gobi version, but function quite happily with the generic. This has been tested with the following devices: K3520-Z K3565-Z K3765-Z K4505-Z It hasn't been tested with the ZTE MF820D, which is the only other device that uses this whitelist at present. Although Bjorn doesn't expect any problems, any testing with that device would be appreciated. Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32: use flushi when run-time patching in per_cpu_patchSam Ravnborg
Davis S. Miller wrote: " The way we do that now is overkill. We only needed to use the MMU cache ops when we had sun4c around because sun4c lacked support for the "flush" instruction. But all sun4m and later chips have it so we can use it unconditionally. So in the per_cpu_patch() code, get rid of the cache ops invocation, and instead execute a "flush %reg" after each of the instruction patch assignments, where %reg is set to the address of the instruction that was stored into. Perhaps take the flushi() definition from asm/cacheflush_64.h and place it into asm/cacheflush.h, then you can simply use that. " Implemented as per suggestion. Moved run-time patching before we call paging_init(), so helper methods in paging_init() may utilise run-time patching too. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32: fix cpuid_patch run-time patchingSam Ravnborg
We hang forever when trying to do run-time patching of instructions identified by the cpuid_patch section Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20pinctrl: pinctrl-imx: add imx51 pinctrl driverDong Aisheng
ChangeLog v1->v2: * change PIN_FUNC_ID base in binding doc to 0 from 1. Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-20pinctrl: pinctrl-imx: add imx53 pinctrl driverDong Aisheng
ChangeLog v1->v2: * change PIN_FUNC_ID base in binding doc to 0 from 1. Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-20regulator: tps65910: use of_node of matched regulator being registerLaxman Dewangan
After getting matched regulators by using of_regulator_match(), initialize the config.of_node of regulator being register with of_regulator_match.of_node of that regulator. This is require for supporting regulator consumers in dt. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-20regulator: tps65910: dt: support when "regulators" node foundLaxman Dewangan
The device tree binding for the tps65910 is described as: tps65911 { reg = <0x2d> ::::::::: regulators { compatible = "ti,tps65911"; ldo1_reg: ldo1 { /** regulator entry */ }; ldo2_reg: ldo2 { /** regulator entry */ }; :::::::::: }; }; Support the regulators functionality only when there is "regulators" child node available for tps65910. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-20regulator: tps65910: add error message in case of failureLaxman Dewangan
Prints error message whenever there is failure on resource allocation. Also used dev_* to print messages instead of pr_* Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-20regulator: tps62360: dt: initialize of_node param for regulator register.Laxman Dewangan
Initialize config.of_node for regulator before registering. This is needed for DT based regulator support. Regulator stores this of_node value in rdev->dev.of_node and used for lookup when client ask for regulator_get(). Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-20m68k: add a defconfig for the M5475EVB ColdFire with MMU boardGreg Ungerer
Add a default configuration for the newly supported ColdFire CPUs running with MMU enabled. This is based on Freescales own M5475EVB demo board. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: unaligned.h fix for M68000 coreLuis Alves
This patch fixes unaligned memory access for the 68000 core based cpu's. Some time ago, my cpu (68000) was raising address/bus error's when mounting cifs shares (didn't bother to debug it at the time). After developing the MMC/SD card driver I was having the same issue when mounting the vfat fs. I've traced the issue down to the 'unaligned.h' file. (I guess nobody has ever used unaligned.h back in the 68328 'era'. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68k: merge the MMU and non-MMU versions of the arch dma codeGreg Ungerer
The majority of the m68k architecture dma code is the same, so merge the current separated files dma_no.c and dma_mm.c back into a single dma.c The main alloc and free routines are a little different, so we keep a single #ifdef based on CONFIG_MMU for them. All the other support functions are now identical. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-20m68knommu: reorganize the no-MMU cache flushing to match m68kGreg Ungerer
Introduce cache_push() and cache_clear() functions for the non-MMU m68k devices. With these in place we can more easily merge some of the common m68k arch code. In particular by reorganizing the __flush_cache_all() code and separating the cache push and clear functions it becomes trivial to implement the new cache_push() and cache_clear() functions. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-05-20m68knommu: move the 54xx platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 532x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5407 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5307 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 528x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 527x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5272 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5249 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 523x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 520x platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: move the 5206 platform code into the common ColdFire code directoryGreg Ungerer
All these separate directories for each ColdFire CPU SoC varient seems like overkill. The majority of them only contain a single small config file. Move these into the common ColdFire code directory. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68knommu: simplify the ColdFire 5407 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 532x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 5307 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 528x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 527x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 5272 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 5249 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 523x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 520x GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: simplify the ColdFire 5206 GPIO struct setupGreg Ungerer
The GPIO data struct setup is now the only remaining code in the platform gpio.c file. So move it to the platform config.c code and remove the gpio.c file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: make duplicated ColdFire GPIO init code common for allGreg Ungerer
The code that adds each ColdFire platforms GPIO signals is duplicated in each platforms specific code. Remove it from each platforms code and put a single version in the existing ColdFire gpio subsystem init code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 532x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5407 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5307 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 528x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. We also need to rename some of the GPIO registers to be consistent with all other ColdFire parts (we can't use the new GPIO macros otherwise). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 527x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5272 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5249 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 523x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 520x init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: switch to GPIO init macros in ColdFire 5206 init codeGreg Ungerer
Modify the GPIO setup table to use the mcfgpio.h macros for table init. Simplifies code and reduces line count significantly. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68knommu: introduce macros to simplify ColdFire GPIO table initializationGreg Ungerer
We have very large tables in the ColdFire CPU GPIO setup code that essentially boil down to 2 distinct types of GPIO pin initiaization. Using 2 macros we can reduce these large tables to at most a dozen lines of setup code, and in quite a few cases a single table entry. Introduce these 2 macros into the existing mcfgpio.h header. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Steven King <sfking@fdwdc.com>
2012-05-20m68k: fix compiler warning by properly inlining flat_set_persistent()Ezequiel Garcia
This patch removes the following warning: fs/binfmt_flat.c:752: warning: unused variable 'persistent'. There is neither functionality change, nor extra code generated. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-05-20m68k: merge the MMU and non-MMU signal.c codeGreg Ungerer
The MMU (signal_mm.c) and non-MMU (signal_no.c) versions of the m68k architecture signal handling code are very similar. Most of their code is the same. Merge the two back into a single signal.c, and move some of the code around inside the file to minimize the number of #ifdefs required. Specificially we can group out the CONFIG_FPU and the CONFIG_MMU code. We end up needing a few other "#ifdef CONFIG_MMU" as well, but not too many. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
generated by cgit (git 2.34.1) at 2025-09-22 11:57:02 +0000