summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-21arm64: vdso: Fix CFI directives in sigreturn trampolineWill Deacon
Daniel reports that the .cfi_startproc is misplaced for the sigreturn trampoline, which causes LLVM's unwinder to misbehave: | I run into this with LLVM’s unwinder. | This combination was always broken. This prompted Dave to question our use of CFI directives more generally, and I ended up going down a rabbit hole trying to figure out how this very poorly documented stuff gets used. Move the CFI directives so that the "mysterious NOP" is included in the .cfi_{start,end}proc block and add a bunch of comments so that I can save myself another headache in future. Cc: Tamas Zsoldos <tamas.zsoldos@arm.com> Reported-by: Dave Martin <dave.martin@arm.com> Reported-by: Daniel Kiss <daniel.kiss@arm.com> Tested-by: Daniel Kiss <daniel.kiss@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-05-21arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instructionWill Deacon
For better or worse, GDB relies on the exact instruction sequence in the VDSO sigreturn trampoline in order to unwind from signals correctly. Commit c91db232da48 ("arm64: vdso: Convert to modern assembler annotations") unfortunately added a BTI C instruction to the start of __kernel_rt_sigreturn, which breaks this check. Thankfully, it's also not required, since the trampoline is called from a RET instruction when returning from the signal handler Remove the unnecessary BTI C instruction from __kernel_rt_sigreturn, and do the same for the 32-bit VDSO as well for good measure. Cc: Daniel Kiss <daniel.kiss@arm.com> Cc: Tamas Zsoldos <tamas.zsoldos@arm.com> Reviewed-by: Dave Martin <dave.martin@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Fixes: c91db232da48 ("arm64: vdso: Convert to modern assembler annotations") Signed-off-by: Will Deacon <will@kernel.org>
2020-05-21kernel/printk: add kmsg SEEK_CUR handlingBruno Meneguele
Userspace libraries, e.g. glibc's dprintf(), perform a SEEK_CUR operation over any file descriptor requested to make sure the current position isn't pointing to junk due to previous manipulation of that same fd. And whenever that fd doesn't have support for such operation, the userspace code expects -ESPIPE to be returned. However, when the fd in question references the /dev/kmsg interface, the current kernel code state returns -EINVAL instead, causing an unexpected behavior in userspace: in the case of glibc, when -ESPIPE is returned it gets ignored and the call completes successfully, while returning -EINVAL forces dprintf to fail without performing any action over that fd: if (_IO_SEEKOFF (fp, (off64_t)0, _IO_seek_cur, _IOS_INPUT|_IOS_OUTPUT) == _IO_pos_BAD && errno != ESPIPE) return NULL; With this patch we make sure to return the correct value when SEEK_CUR is requested over kmsg and also add some kernel doc information to formalize this behavior. Link: https://lore.kernel.org/r/20200317103344.574277-1-bmeneg@redhat.com Cc: linux-kernel@vger.kernel.org Cc: rostedt@goodmis.org, Cc: David.Laight@ACULAB.COM Signed-off-by: Bruno Meneguele <bmeneg@redhat.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-05-21printk: Fix a typo in comment "interator"->"iterator"Ethon Paul
There is a typo in comment, fix it. Signed-off-by: Ethon Paul <ethp@qq.com> Cc: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-05-21irqdomain: Allow software nodes for IRQ domain creationAndy Shevchenko
In some cases we need to have an IRQ domain created out of software node. One of such cases is DesignWare GPIO driver when it's instantiated from half-baked ACPI table (alas, we can't fix it for devices which are few years on market) and thus using software nodes to quirk this. But the driver is using IRQ domains based on per GPIO port firmware nodes, which are in the above case software ones. This brings a warning message to be printed [ 73.957183] irq: Invalid fwnode type for irqdomain and creates an anonymous IRQ domain without a debugfs entry. Allowing software nodes to be valid for IRQ domains rids us of the warning and debugs gets correctly populated. % ls -1 /sys/kernel/debug/irq/domains/ ... intel-quark-dw-apb-gpio:portA Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [maz: refactored commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200520164927.39090-3-andriy.shevchenko@linux.intel.com
2020-05-21irqdomain: Get rid of special treatment for ACPI in __irq_domain_add()Andy Shevchenko
Now that __irq_domain_add() is able to better deals with generic fwnodes, there is no need to special-case ACPI anymore. Get rid of the special treatment for ACPI. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200520164927.39090-2-andriy.shevchenko@linux.intel.com
2020-05-21irqdomain: Make __irq_domain_add() less OF-dependentAndy Shevchenko
__irq_domain_add() relies in some places on the fact that the fwnode can be only of type OF. This prevents refactoring of the code to support other types of fwnode. Make it less OF-dependent by switching it to use the fwnode directly where it makes sense. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200520164927.39090-1-andriy.shevchenko@linux.intel.com
2020-05-21kobject: Make sure the parent does not get released before its childrenHeikki Krogerus
In the function kobject_cleanup(), kobject_del(kobj) is called before the kobj->release(). That makes it possible to release the parent of the kobject before the kobject itself. To fix that, adding function __kboject_del() that does everything that kobject_del() does except release the parent reference. kobject_cleanup() then calls __kobject_del() instead of kobject_del(), and separately decrements the reference count of the parent kobject after kobj->release() has been called. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: kernel test robot <rong.a.chen@intel.com> Fixes: 7589238a8cf3 ("Revert "software node: Simplify software_node_release() function"") Suggested-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20200513151840.36400-1-heikki.krogerus@linux.intel.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-21driver core: Fix handling of SYNC_STATE_ONLY + STATELESS device linksSaravana Kannan
Commit 21c27f06587d ("driver core: Fix SYNC_STATE_ONLY device link implementation") didn't completely fix STATELESS + SYNC_STATE_ONLY handling. What looks like an optimization in that commit is actually a bug that causes an if condition to always take the else path. This prevents reordering of devices in the dpm_list when a DL_FLAG_STATELESS device link is create on top of an existing DL_FLAG_SYNC_STATE_ONLY device link. Fixes: 21c27f06587d ("driver core: Fix SYNC_STATE_ONLY device link implementation") Signed-off-by: Saravana Kannan <saravanak@google.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200520043626.181820-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-21mips: MAAR: Use more precise address maskSerge Semin
Indeed according to the MIPS32 Privileged Resource Architecgture the MAAR pair register address field either takes [12:31] bits for non-XPA systems and [12:55] otherwise. In any case the current address mask is just wrong for 64-bit and 32-bits XPA chips. So lets extend it to 59-bits of physical address value. This shall cover the 64-bits architecture and systems with XPA enabled, and won't cause any problem for non-XPA 32-bit systems, since address values exceeding the architecture specific MAAR mask will be just truncated with setting zeros in the unsupported upper bits. Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-21MIPS: SGI-IP27: Remove not used definition TICK_SIZE in ip27-timer.cTiezhu Yang
After commit f5ff0a280201 ("[MIPS] Use generic NTP code for all MIPS platforms"), TICK_SIZE is not used in ip27-timer.c for many years, remove it. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-20igc: Remove mac_table from igc_adapterAndre Guedes
In igc_adapter we keep a sort of shadow copy of RAL and RAH registers. There is not much benefit in keeping it, at the cost of maintainability, since adding/removing MAC address filters is not hot path, and we already keep filters information in adapter->nfc_filter_list for cleanup and restoration purposes. So in order to simplify the MAC address filtering code and prepare it for source address support, this patch removes the mac_table from igc_adapter. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-20igc: Remove IGC_MAC_STATE_SRC_ADDR flagAndre Guedes
MAC address filters based on source address are not currently supported by the IGC driver. Despite of that, the driver have some dangling code to handle it, inherited from IGB driver. This patch removes that code to prepare for a follow up patch that adds proper source MAC address filter support. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-20net: nlmsg_cancel() if put fails for nhmsgStephen Worley
Fixes data remnant seen when we fail to reserve space for a nexthop group during a larger dump. If we fail the reservation, we goto nla_put_failure and cancel the message. Reproduce with the following iproute2 commands: ===================== ip link add dummy1 type dummy ip link add dummy2 type dummy ip link add dummy3 type dummy ip link add dummy4 type dummy ip link add dummy5 type dummy ip link add dummy6 type dummy ip link add dummy7 type dummy ip link add dummy8 type dummy ip link add dummy9 type dummy ip link add dummy10 type dummy ip link add dummy11 type dummy ip link add dummy12 type dummy ip link add dummy13 type dummy ip link add dummy14 type dummy ip link add dummy15 type dummy ip link add dummy16 type dummy ip link add dummy17 type dummy ip link add dummy18 type dummy ip link add dummy19 type dummy ip link add dummy20 type dummy ip link add dummy21 type dummy ip link add dummy22 type dummy ip link add dummy23 type dummy ip link add dummy24 type dummy ip link add dummy25 type dummy ip link add dummy26 type dummy ip link add dummy27 type dummy ip link add dummy28 type dummy ip link add dummy29 type dummy ip link add dummy30 type dummy ip link add dummy31 type dummy ip link add dummy32 type dummy ip link set dummy1 up ip link set dummy2 up ip link set dummy3 up ip link set dummy4 up ip link set dummy5 up ip link set dummy6 up ip link set dummy7 up ip link set dummy8 up ip link set dummy9 up ip link set dummy10 up ip link set dummy11 up ip link set dummy12 up ip link set dummy13 up ip link set dummy14 up ip link set dummy15 up ip link set dummy16 up ip link set dummy17 up ip link set dummy18 up ip link set dummy19 up ip link set dummy20 up ip link set dummy21 up ip link set dummy22 up ip link set dummy23 up ip link set dummy24 up ip link set dummy25 up ip link set dummy26 up ip link set dummy27 up ip link set dummy28 up ip link set dummy29 up ip link set dummy30 up ip link set dummy31 up ip link set dummy32 up ip link set dummy33 up ip link set dummy34 up ip link set vrf-red up ip link set vrf-blue up ip link set dummyVRFred up ip link set dummyVRFblue up ip ro add 1.1.1.1/32 dev dummy1 ip ro add 1.1.1.2/32 dev dummy2 ip ro add 1.1.1.3/32 dev dummy3 ip ro add 1.1.1.4/32 dev dummy4 ip ro add 1.1.1.5/32 dev dummy5 ip ro add 1.1.1.6/32 dev dummy6 ip ro add 1.1.1.7/32 dev dummy7 ip ro add 1.1.1.8/32 dev dummy8 ip ro add 1.1.1.9/32 dev dummy9 ip ro add 1.1.1.10/32 dev dummy10 ip ro add 1.1.1.11/32 dev dummy11 ip ro add 1.1.1.12/32 dev dummy12 ip ro add 1.1.1.13/32 dev dummy13 ip ro add 1.1.1.14/32 dev dummy14 ip ro add 1.1.1.15/32 dev dummy15 ip ro add 1.1.1.16/32 dev dummy16 ip ro add 1.1.1.17/32 dev dummy17 ip ro add 1.1.1.18/32 dev dummy18 ip ro add 1.1.1.19/32 dev dummy19 ip ro add 1.1.1.20/32 dev dummy20 ip ro add 1.1.1.21/32 dev dummy21 ip ro add 1.1.1.22/32 dev dummy22 ip ro add 1.1.1.23/32 dev dummy23 ip ro add 1.1.1.24/32 dev dummy24 ip ro add 1.1.1.25/32 dev dummy25 ip ro add 1.1.1.26/32 dev dummy26 ip ro add 1.1.1.27/32 dev dummy27 ip ro add 1.1.1.28/32 dev dummy28 ip ro add 1.1.1.29/32 dev dummy29 ip ro add 1.1.1.30/32 dev dummy30 ip ro add 1.1.1.31/32 dev dummy31 ip ro add 1.1.1.32/32 dev dummy32 ip next add id 1 via 1.1.1.1 dev dummy1 ip next add id 2 via 1.1.1.2 dev dummy2 ip next add id 3 via 1.1.1.3 dev dummy3 ip next add id 4 via 1.1.1.4 dev dummy4 ip next add id 5 via 1.1.1.5 dev dummy5 ip next add id 6 via 1.1.1.6 dev dummy6 ip next add id 7 via 1.1.1.7 dev dummy7 ip next add id 8 via 1.1.1.8 dev dummy8 ip next add id 9 via 1.1.1.9 dev dummy9 ip next add id 10 via 1.1.1.10 dev dummy10 ip next add id 11 via 1.1.1.11 dev dummy11 ip next add id 12 via 1.1.1.12 dev dummy12 ip next add id 13 via 1.1.1.13 dev dummy13 ip next add id 14 via 1.1.1.14 dev dummy14 ip next add id 15 via 1.1.1.15 dev dummy15 ip next add id 16 via 1.1.1.16 dev dummy16 ip next add id 17 via 1.1.1.17 dev dummy17 ip next add id 18 via 1.1.1.18 dev dummy18 ip next add id 19 via 1.1.1.19 dev dummy19 ip next add id 20 via 1.1.1.20 dev dummy20 ip next add id 21 via 1.1.1.21 dev dummy21 ip next add id 22 via 1.1.1.22 dev dummy22 ip next add id 23 via 1.1.1.23 dev dummy23 ip next add id 24 via 1.1.1.24 dev dummy24 ip next add id 25 via 1.1.1.25 dev dummy25 ip next add id 26 via 1.1.1.26 dev dummy26 ip next add id 27 via 1.1.1.27 dev dummy27 ip next add id 28 via 1.1.1.28 dev dummy28 ip next add id 29 via 1.1.1.29 dev dummy29 ip next add id 30 via 1.1.1.30 dev dummy30 ip next add id 31 via 1.1.1.31 dev dummy31 ip next add id 32 via 1.1.1.32 dev dummy32 i=100 while [ $i -le 200 ] do ip next add id $i group 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19 echo $i ((i++)) done ip next add id 999 group 1/2/3/4/5/6 ip next ls ======================== Fixes: ab84be7e54fc ("net: Initial nexthop code") Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20ax25: fix setsockopt(SO_BINDTODEVICE)Eric Dumazet
syzbot was able to trigger this trace [1], probably by using a zero optlen. While we are at it, cap optlen to IFNAMSIZ - 1 instead of IFNAMSIZ. [1] BUG: KMSAN: uninit-value in strnlen+0xf9/0x170 lib/string.c:569 CPU: 0 PID: 8807 Comm: syz-executor483 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 strnlen+0xf9/0x170 lib/string.c:569 dev_name_hash net/core/dev.c:207 [inline] netdev_name_node_lookup net/core/dev.c:277 [inline] __dev_get_by_name+0x75/0x2b0 net/core/dev.c:778 ax25_setsockopt+0xfa3/0x1170 net/ax25/af_ax25.c:654 __compat_sys_setsockopt+0x4ed/0x910 net/compat.c:403 __do_compat_sys_setsockopt net/compat.c:413 [inline] __se_compat_sys_setsockopt+0xdd/0x100 net/compat.c:410 __ia32_compat_sys_setsockopt+0x62/0x80 net/compat.c:410 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3bf/0x6d0 arch/x86/entry/common.c:398 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f57dd9 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000ffae8c1c EFLAGS: 00000217 ORIG_RAX: 000000000000016e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000101 RDX: 0000000000000019 RSI: 0000000020000000 RDI: 0000000000000004 RBP: 0000000000000012 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Local variable ----devname@ax25_setsockopt created at: ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536 ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20Merge branch 'wireguard-fixes'David S. Miller
Jason A. Donenfeld says: ==================== wireguard fixes for 5.7-rc7 Hopefully these are the last fixes for 5.7: 1) A trivial bump in the selftest harness to support gcc-10. build.wireguard.com is still on gcc-9 but I'll probably switch to gcc-10 in the coming weeks. 2) A concurrency fix regarding userspace modifying the pre-shared key at the same time as packets are being processed, reported by Matt Dunwoodie. 3) We were previously clearing skb->hash on egress, which broke fq_codel, cake, and other things that actually make use of the flow hash for queueing, reported by Dave Taht and Toke Høiland-Jørgensen. 4) A fix for the increased memory usage caused by (3). This can be thought of as part of patch (3), but because of the separate reasoning and breadth of it I thought made it a bit cleaner to put in a standalone commit. Fixes (2), (3), and (4) are -stable material. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20wireguard: noise: separate receive counter from send counterJason A. Donenfeld
In "wireguard: queueing: preserve flow hash across packet scrubbing", we were required to slightly increase the size of the receive replay counter to something still fairly small, but an increase nonetheless. It turns out that we can recoup some of the additional memory overhead by splitting up the prior union type into two distinct types. Before, we used the same "noise_counter" union for both sending and receiving, with sending just using a simple atomic64_t, while receiving used the full replay counter checker. This meant that most of the memory being allocated for the sending counter was being wasted. Since the old "noise_counter" type increased in size in the prior commit, now is a good time to split up that union type into a distinct "noise_replay_ counter" for receiving and a boring atomic64_t for sending, each using neither more nor less memory than required. Also, since sometimes the replay counter is accessed without necessitating additional accesses to the bitmap, we can reduce cache misses by hoisting the always-necessary lock above the bitmap in the struct layout. We also change a "noise_replay_counter" stack allocation to kmalloc in a -DDEBUG selftest so that KASAN doesn't trigger a stack frame warning. All and all, removing a bit of abstraction in this commit makes the code simpler and smaller, in addition to the motivating memory usage recuperation. For example, passing around raw "noise_symmetric_key" structs is something that really only makes sense within noise.c, in the one place where the sending and receiving keys can safely be thought of as the same type of object; subsequent to that, it's important that we uniformly access these through keypair->{sending,receiving}, where their distinct roles are always made explicit. So this patch allows us to draw that distinction clearly as well. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20wireguard: queueing: preserve flow hash across packet scrubbingJason A. Donenfeld
It's important that we clear most header fields during encapsulation and decapsulation, because the packet is substantially changed, and we don't want any info leak or logic bug due to an accidental correlation. But, for encapsulation, it's wrong to clear skb->hash, since it's used by fq_codel and flow dissection in general. Without it, classification does not proceed as usual. This change might make it easier to estimate the number of innerflows by examining clustering of out of order packets, but this shouldn't open up anything that can't already be inferred otherwise (e.g. syn packet size inference), and fq_codel can be disabled anyway. Furthermore, it might be the case that the hash isn't used or queried at all until after wireguard transmits the encrypted UDP packet, which means skb->hash might still be zero at this point, and thus no hash taken over the inner packet data. In order to address this situation, we force a calculation of skb->hash before encrypting packet data. Of course this means that fq_codel might transmit packets slightly more out of order than usual. Toke did some testing on beefy machines with high quantities of parallel flows and found that increasing the reply-attack counter to 8192 takes care of the most pathological cases pretty well. Reported-by: Dave Taht <dave.taht@gmail.com> Reviewed-and-tested-by: Toke Høiland-Jørgensen <toke@toke.dk> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20wireguard: noise: read preshared key while taking lockJason A. Donenfeld
Prior we read the preshared key after dropping the handshake lock, which isn't an actual crypto issue if it races, but it's still not quite correct. So copy that part of the state into a temporary like we do with the rest of the handshake state variables. Then we can release the lock, operate on the temporary, and zero it out at the end of the function. In performance tests, the impact of this was entirely unnoticable, probably because those bytes are coming from the same cacheline as other things that are being copied out in the same manner. Reported-by: Matt Dunwoodie <ncon@noconroy.net> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20wireguard: selftests: use newer iproute2 for gcc-10Jason A. Donenfeld
gcc-10 switched to defaulting to -fno-common, which broke iproute2-5.4. This was fixed in iproute-5.6, so switch to that. Because we're after a stable testing surface, we generally don't like to bump these unnecessarily, but in this case, being able to actually build is a basic necessity. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20bpf: Prevent mmap()'ing read-only maps as writableAndrii Nakryiko
As discussed in [0], it's dangerous to allow mapping BPF map, that's meant to be frozen and is read-only on BPF program side, because that allows user-space to actually store a writable view to the page even after it is frozen. This is exacerbated by BPF verifier making a strong assumption that contents of such frozen map will remain unchanged. To prevent this, disallow mapping BPF_F_RDONLY_PROG mmap()'able BPF maps as writable, ever. [0] https://lore.kernel.org/bpf/CAEf4BzYGWYhXdp6BJ7_=9OQPJxQpgug080MMjdSB72i9R+5c6g@mail.gmail.com/ Fixes: fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY") Suggested-by: Jann Horn <jannh@google.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/bpf/20200519053824.1089415-1-andriin@fb.com
2020-05-20security: Fix hook iteration for secid_to_secctxKP Singh
secid_to_secctx is not stackable, and since the BPF LSM registers this hook by default, the call_int_hook logic is not suitable which "bails-on-fail" and casues issues when other LSMs register this hook and eventually breaks Audit. In order to fix this, directly iterate over the security hooks instead of using call_int_hook as suggested in: https: //lore.kernel.org/bpf/9d0eb6c6-803a-ff3a-5603-9ad6d9edfc00@schaufler-ca.com/#t Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks") Fixes: 625236ba3832 ("security: Fix the default value of secid_to_secctx hook") Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/bpf/20200520125616.193765-1-kpsingh@chromium.org
2020-05-20Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2020-05-19 This series contains updates to igc only. Sasha cleans up the igc driver code that is not used or needed. Vitaly cleans up driver code that was used to support Virtualization on a device that is not supported by igc, so remove the dead code. Andre renames a few macros to align with register and field names described in the data sheet. Also adds the VLAN Priority Queue Fliter and EType Queue Filter registers to the list of registers dumped by igc_get_regs(). Added additional debug messages and updated return codes for unsupported features. Refactored the VLAN priority filtering code to move the core logic into igc_main.c. Cleaned up duplicate code and useless code. ==================== Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20Merge branch 'uaccess.net' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Al Viro says: ==================== uaccess-related stuff in net/* Assorted uaccess-related work in net/*. First, there's getting rid of compat_alloc_user_space() mess in MCAST_... [gs]etsockopt() - no need to play with copying to/from temporary object on userland stack, etc., when ->compat_[sg]etsockopt() instances in question can easly do everything without that. That's the first 13 patches. Then there's a trivial bit in net/batman-adv (completely unrelated to everything else) and finally getting the atm compat ioctls into simpler shape. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-21Merge tag 'drm-intel-next-fixes-2020-05-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Fix for TypeC power domain toggling on resets (Cc: stable). Two compile time warning fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200520123227.GA21104@jlahtine-desk.ger.corp.intel.com
2020-05-20atm: switch do_atmif_sioc() to direct use of atm_dev_ioctl()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20atm: lift copyin from atm_dev_ioctl()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20atm: switch do_atm_iobuf() to direct use of atm_getnames()Al Viro
... and sod the compat_alloc_user_space() with its complications Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20atm: move copyin from atm_getnames() into the callerAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20atm: separate ATM_GETNAMES handling from the rest of atm_dev_ioctl()Al Viro
atm_dev_ioctl() does copyin in two different ways - one for ATM_GETNAMES, another for everything else. Start with separating the former into a new helper (atm_getnames()). The next step will be to lift the copyin into the callers. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20batadv_socket_read(): get rid of pointless access_ok()Al Viro
address is passed only to copy_to_user() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20get rid of compat_mc_setsockopt()Al Viro
not used anymore Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20handle the group_source_req options directlyAl Viro
Native ->setsockopt() handling of these options (MCAST_..._SOURCE_GROUP and MCAST_{,UN}BLOCK_SOURCE) consists of copyin + call of a helper that does the actual work. The only change needed for ->compat_setsockopt() is a slightly different copyin - the helpers can be reused as-is. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20ipv6: take handling of group_source_req options into a helperAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20ipv4: take handling of group_source_req options into a helperAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20ipv[46]: do compat setsockopt for MCAST_{JOIN,LEAVE}_GROUP directlyAl Viro
direct parallel to the way these two are handled in the native ->setsockopt() instances - the helpers that do the real work are already separated and can be reused as-is in this case. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20ipv6: do compat setsockopt for MCAST_MSFILTER directlyAl Viro
similar to the ipv4 counterpart of that patch - the same trick used to align the tail array properly. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20ip6_mc_msfilter(): pass the address list separatelyAl Viro
that way we'll be able to reuse it for compat case Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20ipv4: do compat setsockopt for MCAST_MSFILTER directlyAl Viro
Parallel to what the native setsockopt() does, except that unlike the native setsockopt() we do not use memdup_user() - we want the sockaddr_storage fields properly aligned, so we allocate 4 bytes more and copy compat_group_filter at the offset 4, which yields the proper alignments. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20set_mcast_msfilter(): take the guts of setsockopt(MCAST_MSFILTER) into a helperAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20get rid of compat_mc_getsockopt()Al Viro
now we can do MCAST_MSFILTER in compat ->getsockopt() without playing silly buggers with copying things back and forth. We can form a native struct group_filter (sans the variable-length tail) on stack, pass that + pointer to the tail of original request to the helper doing the bulk of the work, then do the rest of copyout - same as the native getsockopt() does. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20ip*_mc_gsfget(): lift copyout of struct group_filter into callersAl Viro
pass the userland pointer to the array in its tail, so that part gets copied out by our functions; copyout of everything else is done in the callers. Rationale: reuse for compat; the array is the same in native and compat, the layout of parts before it is different for compat. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20compat_ip{,v6}_setsockopt(): enumerate MCAST_... options explicitlyAl Viro
We want to check if optname is among the MCAST_... ones; do that as an explicit switch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-20lift compat definitions of mcast [sg]etsockopt requests into net/compat.hAl Viro
We want to get rid of compat_mc_[sg]etsockopt() and to have that stuff handled without compat_alloc_user_space(), extra copying through userland, etc. To do that we'll need ipv4 and ipv6 instances of ->compat_[sg]etsockopt() to manipulate the 32bit variants of mcast requests, so we need to move the definitions of those out of net/compat.c and into a public header. This patch just does a mechanical move to include/net/compat.h Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-05-21Merge tag 'exynos-drm-next-for-v5.8' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Check imported buffer mapping in generic way - This patch reworks exynos_drm_gem_prime_import_sg_table function, which checks if the imported buffer has been mapped as contiguous or not in generic way, and flag a exynos gem buffer type properly according to the mapped way. Fixups - Drop a reference count to in_bridge_node correctly. - Enable the runtime power management correctly. . The runtime pm should be enabled before calling compont_add(). Cleanups - Do not register "by hand" a sysfs file, and use dev_groups instead. - Drop internal 'pages' array which aren't needed. - Remove dead-code. - Correct type casting. - Drop unnecessary error messages. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1589952785-24210-1-git-send-email-inki.dae@samsung.com
2020-05-20ARM: dts: bcm: HR2: Fix PPI interrupt typesHamish Martin
These error messages are output when booting on a BCM HR2 system: GIC: PPI11 is secure or misconfigured GIC: PPI13 is secure or misconfigured Per ARM documentation these interrupts are triggered on a rising edge. See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1, Section 3.3.8 Interrupt Configuration Registers. The same issue was resolved for NSP systems in commit 5f1aa51c7a1e ("ARM: dts: NSP: Fix PPI interrupt types"). Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-05-20ARM: dts: bcm2835-rpi-zero-w: Fix led polarityVincent Stehlé
The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low. This has been verified on a board and somewhat confirmed by both the GPIO name ("STATUS_LED_N") and the reduced schematics [1]. [1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2020-05-20drm/dp: Lenovo X13 Yoga OLED panel brightness fixMark Pearson
Add another panel that needs the edid quirk to the list so that brightness control works correctly. Fixes issue seen on Lenovo X13 Yoga with OLED panel Co-developed-by: jendrina@lenovo.com Signed-off-by: Mark Pearson <mpearson@gmail.com> [fixed commit message, sobs] Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200519025635.22846-1-mpearson@lenovo.com
2020-05-20riscv: Fix print_vm_layout build error if NOMMUKefeng Wang
arch/riscv/mm/init.c: In function ‘print_vm_layout’: arch/riscv/mm/init.c:68:37: error: ‘FIXADDR_START’ undeclared (first use in this function); arch/riscv/mm/init.c:69:20: error: ‘FIXADDR_TOP’ undeclared arch/riscv/mm/init.c:70:37: error: ‘PCI_IO_START’ undeclared arch/riscv/mm/init.c:71:20: error: ‘PCI_IO_END’ undeclared arch/riscv/mm/init.c:72:38: error: ‘VMEMMAP_START’ undeclared arch/riscv/mm/init.c:73:20: error: ‘VMEMMAP_END’ undeclared (first use in this function); Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-20audit: add subj creds to NETFILTER_CFG record toRichard Guy Briggs
Some table unregister actions seem to be initiated by the kernel to garbage collect unused tables that are not initiated by any userspace actions. It was found to be necessary to add the subject credentials to cover this case to reveal the source of these actions. A sample record: The uid, auid, tty, ses and exe fields have not been included since they are in the SYSCALL record and contain nothing useful in the non-user context. Here are two sample orphaned records: type=NETFILTER_CFG msg=audit(2020-05-20 12:14:36.505:5) : table=filter family=ipv4 entries=0 op=register pid=1 subj=kernel comm=swapper/0 type=NETFILTER_CFG msg=audit(2020-05-20 12:15:27.701:301) : table=nat family=bridge entries=0 op=unregister pid=30 subj=system_u:system_r:kernel_t:s0 comm=kworker/u4:1 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
generated by cgit (git 2.34.1) at 2025-09-23 16:06:18 +0000