Age | Commit message (Collapse) | Author |
|
Add check for the return value of __pgd_alloc() in pgd_alloc() to prevent
null pointer dereference.
Link: https://lkml.kernel.org/r/20250217160017.2375536-1-haoxiang_li2024@163.com
Fixes: a9b3c355c2e6 ("asm-generic: pgalloc: provide generic __pgd_{alloc,free}")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Sam Creasey <sammy@sammy.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
further reduced
damos_quota_goal.py selftest see if DAMOS quota goals tuning feature
increases or reduces the effective size quota for given score as expected.
The tuning feature sets the minimum quota size as one byte, so if the
effective size quota is already one, we cannot expect it further be
reduced. However the test is not aware of the edge case, and fails since
it shown no expected change of the effective quota. Handle the case by
updating the failure logic for no change to see if it was the case, and
simply skips to next test input.
Link: https://lkml.kernel.org/r/20250217182304.45215-1-sj@kernel.org
Fixes: f1c07c0a1662 ("selftests/damon: add a test for DAMOS quota goal")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502171423.b28a918d-lkp@intel.com
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org> [6.10.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit a5c6bc590094a1a73cf6fa3f505e1945d2bf2461.
The general approach described in commit e076eaca5906 ("selftests: break
the dependency upon local header files") was taken one step too far here:
it should not have been extended to include the syscall numbers. This is
because doing so would require per-arch support in tools/include/uapi, and
no such support exists.
This revert fixes two separate reports of test failures, from Dave
Hansen[1], and Li Wang[2]. An excerpt of Dave's report:
Before this commit (a5c6bc590094a1a73cf6fa3f505e1945d2bf2461) things are
fine. But after, I get:
running PKEY tests for unsupported CPU/OS
An excerpt of Li's report:
I just found that mlock2_() return a wrong value in mlock2-test
[1] https://lore.kernel.org/dc585017-6740-4cab-a536-b12b37a7582d@intel.com
[2] https://lore.kernel.org/CAEemH2eW=UMu9+turT2jRie7+6ewUazXmA6kL+VBo3cGDGU6RA@mail.gmail.com
Link: https://lkml.kernel.org/r/20250214033850.235171-1-jhubbard@nvidia.com
Fixes: a5c6bc590094 ("selftests/mm: remove local __NR_* definitions")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Li Wang <liwang@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Andrei Vagin <avagin@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is helpful to vary the number of the LCOFI interrupts generated
by the overflow test. Allow additional argument for overflow test
to accommodate that. It can be easily cross-validated with
/proc/interrupts output in the host.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250303-kvm_pmu_improve-v2-4-41d177e45929@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The PMU test commandline option takes an argument to disable a
certain test. The initial assumption behind this was a common use case
is just to run all the test most of the time. However, running a single
test seems more useful instead. Especially, the overflow test has been
helpful to validate PMU virtualizaiton interrupt changes.
Switching the command line option to run a single test instead
of disabling a single test also allows to provide additional
test specific arguments to the test. The default without any options
remains unchanged which continues to run all the tests.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250303-kvm_pmu_improve-v2-3-41d177e45929@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
There is no need to start the counter in the overflow handler as we
intend to trigger precise number of LCOFI interrupts through these
tests. The overflow irq handler has already stopped the counter. As
a result, the stop call from the test function may return already
stopped error which is fine as well.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250303-kvm_pmu_improve-v2-2-41d177e45929@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The perf event should be marked disabled during the creation as
it is not ready to be scheduled until there is SBI PMU start call
or config matching is called with auto start. Otherwise, event add/start
gets called during perf_event_create_kernel_counter function.
It will be enabled and scheduled to run via perf_event_enable during
either the above mentioned scenario.
Fixes: 0cb74b65d2e5 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250303-kvm_pmu_improve-v2-1-41d177e45929@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
On MMIO devices (e.g. MT7988 or EN7581) unicast traffic received on lanX
port is flooded on all other user ports if the DSA switch is configured
without VLAN support since PORT_MATRIX in PCR regs contains all user
ports. Similar to MDIO devices (e.g. MT7530 and MT7531) fix the issue
defining default VLAN-ID 0 for MT7530 MMIO devices.
Fixes: 110c18bfed414 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20250304-mt7988-flooding-fix-v1-1-905523ae83e9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The capability actually fails with EINVAL if vCPUs have already been
created.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305230825.484091-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM recently added a capability that allows userspace to override the
'implementation ID' registers presented to the VM. MIDR_EL1 is a special
example, where the hypervisor can directly set the value when read from
EL1 using VPIDR_EL2.
Copy the VM-wide value for MIDR_EL1 into the hyp VM for non-protected
guests when the capability is enabled so VPIDR_EL2 gets set up
correctly.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/kvmarm/ac594b9c-4bbb-46c8-9391-e7a68ce4de5b@sirena.org.uk/
Fixes: 3adaee783061 ("KVM: arm64: Allow userspace to change the implementation ID registers")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305230825.484091-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Since commit 2843cae26644 ("KVM: arm64: Treat CTR_EL0 as a VM feature
ID register") KVM has allowed userspace to configure the VM-wide view of
CTR_EL0, falling back to trap-n-emulate if the value doesn't match
hardware. It appears that this has worked by chance in protected-mode
for some time, and on systems with FEAT_EVT protected-mode
unconditionally sets TID4 (i.e. TID2 traps sans CTR_EL0).
Forward the guest CTR_EL0 value through to the hyp VM and align the
TID2/TID4 configuration with the non-protected setup.
Fixes: 2843cae26644 ("KVM: arm64: Treat CTR_EL0 as a VM feature ID register")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305230825.484091-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Added missing newline at the end of pr_warn! usage
so the log is not missed.
Fixes: 6551a7fe0acb ("rust: error: Add Error::from_errno{_unchecked}()")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-2-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Fix adding a newline at the end of the usage of pr_info! in the
documentation
Fixes: e3c3d34507c7 ("docs: rust: Add description of Rust documentation test as KUnit ones")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-1-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
ISO C's `aligned_alloc` is partially implementation-defined; on some
systems it inherits stricter requirements from POSIX's `posix_memalign`.
This causes the call added in commit dd09538fb409 ("rust: alloc:
implement `Cmalloc` in module allocator_test") to fail on macOS because
it doesn't meet the requirements of `posix_memalign`.
Adjust the call to meet the POSIX requirement and add a comment. This
fixes failures in `make rusttest` on macOS.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Cc: stable@vger.kernel.org
Fixes: dd09538fb409 ("rust: alloc: implement `Cmalloc` in module allocator_test")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250213-aligned-alloc-v7-1-d2a2d0be164b@gmail.com
[ Added Cc: stable. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
`Option<KBox<T>>`
According to [1], `NonNull<T>` and `#[repr(transparent)]` wrapper types
such as our custom `KBox<T>` have the null pointer optimization only if
`T: Sized`. Thus remove the `Zeroable` implementation for the unsized
case.
Link: https://doc.rust-lang.org/stable/std/option/index.html#representation [1]
Reported-by: Alice Ryhl <aliceryhl@google.com>
Closes: https://lore.kernel.org/rust-for-linux/CAH5fLghL+qzrD8KiCF1V3vf2YcC6aWySzkmaE2Zzrnh1gKj-hw@mail.gmail.com/
Cc: stable@vger.kernel.org # v6.12+ (a custom patch will be needed for 6.6.y)
Fixes: 38cde0bd7b67 ("rust: init: add `Zeroable` trait and `init::zeroed` function")
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250305132836.2145476-1-benno.lossin@proton.me
[ Added Closes tag and moved up the Reported-by one. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
In commit 392e34b6bc22 ("kbuild: rust: remove the `alloc` crate and
`GlobalAlloc`") we stopped using the upstream `alloc` crate.
Thus remove a few leftover mentions treewide.
Cc: stable@vger.kernel.org # Also to 6.12.y after the `alloc` backport lands
Fixes: 392e34b6bc22 ("kbuild: rust: remove the `alloc` crate and `GlobalAlloc`")
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250303171030.1081134-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Passing a variable string as the format to dev_set_name() causes a W=1 warning:
drivers/edac/edac_device.c:736:9: error: format not a string literal and no format arguments [-Werror=format-security]
736 | ret = dev_set_name(&ctx->dev, name);
| ^~~
Use a literal "%s" instead so the name can be the argument.
Fixes: db99ea5f2c03 ("EDAC: Add support for EDAC device features control")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250304143603.995820-1-arnd@kernel.org
|
|
around
nf_conncount is supposed to skip garbage collection if it has already
run garbage collection in the same jiffy. Unfortunately, this is broken
when jiffies wrap around which this patch fixes.
The problem is that last_gc in the nf_conncount_list struct is an u32,
but jiffies is an unsigned long which is 8 bytes on my systems. When
those two are compared it only works until last_gc wraps around.
See bug report: https://bugzilla.netfilter.org/show_bug.cgi?id=1778
for more details.
Fixes: d265929930e2 ("netfilter: nf_conncount: reduce unnecessary GC")
Signed-off-by: Nicklas Bo Jensen <njensen@akamai.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The IOPOLL path posts CQEs when the io_kiocb is marked as completed,
so it cannot rely on the usual retry that non-IOPOLL requests do for
read/write requests.
If -EAGAIN is received and the request should be retried, go through
the normal completion path and let the normal flush logic catch it and
reissue it, like what is done for !IOPOLL reads or writes.
Fixes: d803d123948f ("io_uring/rw: handle -EAGAIN retry at IO completion time")
Reported-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/io-uring/2b43ccfa-644d-4a09-8f8f-39ad71810f41@oracle.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If userptr pages are freed after a call to the xe mmu notifier,
the device will not be blocked out from theoretically accessing
these pages unless they are also unmapped from the iommu, and
this violates some aspects of the iommu-imposed security.
Ensure that userptrs are unmapped in the mmu notifier to
mitigate this. A naive attempt would try to free the sg table, but
the sg table itself may be accessed by a concurrent bind
operation, so settle for only unmapping.
v3:
- Update lockdep asserts.
- Fix a typo (Matthew Auld)
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304173342.22009-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit ba767b9d01a2c552d76cf6f46b125d50ec4147a6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The pnfs that we obtain from hmm_range_fault() point to pages that
we don't have a reference on, and the guarantee that they are still
in the cpu page-tables is that the notifier lock must be held and the
notifier seqno is still valid.
So while building the sg table and marking the pages accesses / dirty
we need to hold this lock with a validated seqno.
However, the lock is reclaim tainted which makes
sg_alloc_table_from_pages_segment() unusable, since it internally
allocates memory.
Instead build the sg-table manually. For the non-iommu case
this might lead to fewer coalesces, but if that's a problem it can
be fixed up later in the resource cursor code. For the iommu case,
the whole sg-table may still be coalesced to a single contigous
device va region.
This avoids marking pages that we don't own dirty and accessed, and
it also avoid dereferencing struct pages that we don't own.
v2:
- Use assert to check whether hmm pfns are valid (Matthew Auld)
- Take into account that large pages may cross range boundaries
(Matthew Auld)
v3:
- Don't unnecessarily check for a non-freed sg-table. (Matthew Auld)
- Add a missing up_read() in an error path. (Matthew Auld)
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304173342.22009-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit ea3e66d280ce2576664a862693d1da8fd324c317)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add proper #ifndef around the xe_hmm.h header, proper spacing
and since the documentation mostly follows kerneldoc format,
make it kerneldoc. Also prepare for upcoming -stable fixes.
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Matthew Brost <Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304173342.22009-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit bbe2b06b55bc061c8fcec034ed26e88287f39143)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Concurrent VM bind staging and zapping of PTEs from a userptr notifier
do not work because the view of PTEs is not stable. VM binds cannot
acquire the notifier lock during staging, as memory allocations are
required. To resolve this race condition, use a staging tree for VM
binds that is committed only under the userptr notifier lock during the
final step of the bind. This ensures a consistent view of the PTEs in
the userptr notifier.
A follow up may only use staging for VM in fault mode as this is the
only mode in which the above race exists.
v3:
- Drop zap PTE change (Thomas)
- s/xe_pt_entry/xe_pt_entry_staging (Thomas)
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org>
Fixes: e8babb280b5e ("drm/xe: Convert multiple bind ops into single job")
Fixes: a708f6501c69 ("drm/xe: Update PT layer with better error handling")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228073058.59510-5-thomas.hellstrom@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
(cherry picked from commit 6f39b0c5ef0385eae586760d10b9767168037aa5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fix fault mode invalidation racing with unbind leading to the
PTE zapping potentially traversing an invalid page-table tree.
Do this by holding the notifier lock across PTE zapping. This
might transfer any contention waiting on the notifier seqlock
read side to the notifier lock read side, but that shouldn't be
a major problem.
At the same time get rid of the open-coded invalidation in the bind
code by relying on the notifier even when the vma bind is not
yet committed.
Finally let userptr invalidation call a dedicated xe_vm function
performing a full invalidation.
Fixes: e8babb280b5e ("drm/xe: Convert multiple bind ops into single job")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228073058.59510-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 100a5b8dadfca50d91d9a4c9fc01431b42a25cab)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fix a (harmless) misplaced #endif leading to declarations
appearing multiple times.
Fixes: 0eb2a18a8fad ("drm/xe: Implement VM snapshot support for BO's and userptr")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228073058.59510-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit fcc20a4c752214b3e25632021c57d7d1d71ee1dd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If a userptr vma subject to prefetching was already invalidated
or invalidated during the prefetch operation, the operation would
repeatedly return -EAGAIN which would typically cause an infinite
loop.
Validate the userptr to ensure this doesn't happen.
v2:
- Don't fallthrough from UNMAP to PREFETCH (Matthew Brost)
Fixes: 5bd24e78829a ("drm/xe/vm: Subclass userptr vmas")
Fixes: 617eebb9c480 ("drm/xe: Fix array of binds")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228073058.59510-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 03c346d4d0d85d210d549d43c8cfb3dfb7f20e0a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently PLL142XX locktime is 270. As per spec, it should be 150. Hence
update PLL142XX controller locktime to 150.
Cc: stable@vger.kernel.org
Fixes: 4f346005aaed ("clk: samsung: fsd: Add initial clock support")
Signed-off-by: Varada Pavani <v.pavani@samsung.com>
Link: https://lore.kernel.org/r/20250225131918.50925-3-v.pavani@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
EARLY_WAKEUP_SW_TRIG_*_SET and EARLY_WAKEUP_SW_TRIG_*_CLEAR
registers are only writeable. Attempting to read these registers
during samsung_clk_save() causes a synchronous external abort.
Remove these 8 registers from cmu_top_clk_regs[] array so that
system suspend gets further.
Note: the code path can be exercised using the following command:
echo mem > /sys/power/state
Fixes: 2c597bb7d66a ("clk: samsung: clk-gs101: Add cmu_top, cmu_misc and cmu_apm support")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250303-clk-suspend-fix-v1-1-c2edaf66260f@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
mappings
While the kselftest was added at the same time with the kernel support
for MTE on hugetlb mappings, the tests may be run on older kernels. Skip
the tests if PROT_MTE is not supported on MAP_HUGETLB mappings.
Fixes: 27879e8cb6b0 ("selftests: arm64: add hugetlb mte tests")
Cc: Yang Shi <yang@os.amperecomputing.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250221093331.2184245-3-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
check_hugetlb_options.c
The architecture doesn't define precise/imprecise MTE tag check modes,
only synchronous and asynchronous. Use the correct naming and also
ensure they match the MTE_{ASYNC,SYNC}_ERR type.
Fixes: 27879e8cb6b0 ("selftests: arm64: add hugetlb mte tests")
Cc: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250221093331.2184245-2-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
CS35L41 HDA
Laptop uses 2 CS35L41 Amps with HDA, using External boost with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-8-sbinding@opensource.cirrus.com
|
|
CS35L41 HDA
Add support for ASUS B5605CCA and B5405CCA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-7-sbinding@opensource.cirrus.com
|
|
CS35L41 HDA
Add support for ASUS B3405CCA / P3405CCA, B3605CCA / P3605CCA,
B3405CCA, B3605CCA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-6-sbinding@opensource.cirrus.com
|
|
Add support for ASUS B3405CVA, B5405CVA, B5605CVA, B3605CVA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-5-sbinding@opensource.cirrus.com
|
|
Add support for ASUS G614PH/PM/PP and G614FH/FM/FP.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-4-sbinding@opensource.cirrus.com
|
|
CS35L41 HDA
Add support for ASUS GA603KP, GA603KM and GA603KH.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-3-sbinding@opensource.cirrus.com
|
|
Add support for ASUS G814PH/PM/PP and G814FH/FM/FP.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-2-sbinding@opensource.cirrus.com
|
|
controllers
The cgroup v2 cpu controller has a limitation that if
CONFIG_RT_GROUP_SCHED is enabled, the cpu controller can be enabled only
if all the realtime processes are in the root cgroup. The other
controllers have no such restriction. They can be used for the resource
control of realtime processes irrespective of whether
CONFIG_RT_GROUP_SCHED is enabled or not.
Signed-off-by: Shashank Balaji <shashank.mahadasyam@sony.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The kernel_recvmsg() function returns an int which could be either
negative error codes or the number of bytes received. The problem is
that the condition:
if (ret < sizeof(*icresp)) {
is type promoted to type unsigned long and negative values are treated
as high positive values which is success, when they should be treated as
failure. Handle invalid positive returns separately from negative
error codes to avoid this problem.
Fixes: 578539e09690 ("nvme-tcp: fix connect failure on receiving partial ICResp PDU")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Let's be consistent in using pud_sect_supported() for PUD_SIZE sized pages.
Hence change hugetlb_mask_last_page() and arch_make_huge_pte() as required.
Also re-arranged the switch statement for a common warning message.
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250220050534.799645-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When CONFIG_ARM64_PA_BITS_52 is enabled, page table helpers __pte_to_phys()
and __phys_to_pte_val() are functions which return phys_addr_t and pteval_t
respectively as expected. But otherwise without this config being enabled,
they are defined as macros and their return types are implicit.
Until now this has worked out correctly as both pte_t and phys_addr_t data
types have been 64 bits. But with the introduction of 128 bit page tables,
pte_t becomes 128 bits. Hence this ends up with incorrect widths after the
conversions, which leads to compiler warnings.
Fix these warnings by converting __pte_to_phys() and __phys_to_pte_val()
as functions instead where the return types are handled explicitly.
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250227022412.2015835-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- power management fix in intel-thc-hid (Even Xu)
- nintendo gencon mapping fix (Ryan McClelland)
- fix for UAF on device diconnect path in hid-steam (Vicki Pfau)
- two fixes for UAF on device disconnect path in intel-ish-hid (Zhang
Lixu)
- fix for potential NULL dereference in hid-appleir (Daniil Dulov)
- few other small cosmetic fixes (e.g. typos)
* tag 'hid-for-linus-2025030501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Intel-thc-hid: Intel-quickspi: Correct device state after S4
HID: intel-thc-hid: Fix spelling mistake "intput" -> "input"
HID: hid-steam: Fix use-after-free when detaching device
HID: debug: Fix spelling mistake "Messanger" -> "Messenger"
HID: appleir: Fix potential NULL dereference at raw event handle
HID: apple: disable Fn key handling on the Omoton KB066
HID: i2c-hid: improve i2c_hid_get_report error message
HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove()
HID: intel-ish-hid: Fix use-after-free issue in hid_ishtp_cl_remove()
HID: google: fix unused variable warning under !CONFIG_ACPI
HID: nintendo: fix gencon button events map
HID: corsair-void: Update power supply values with a unified work handler
|
|
While looking for incorrect users of the pipe head/tail fields (see
commit c27c66afc449: "fs/pipe: Fix pipe_occupancy() with 16-bit
indexes"), I found a bug in pipe_discard_from() that looked entirely
broken.
However, the fix is trivial: this buggy function isn't actually called
by anything, so let's just remove it ASAP.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
always allow ih interrupt from fw on smu v14 based on
the interface requirement
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a3199eba46c54324193607d9114a1e321292d7a1)
Cc: stable@vger.kernel.org # 6.12.x
|
|
num_gb_pipes was set to a wrong value using r420_pipe_config
This have lead to HyperZ glitches on fast Z clearing.
Closes: https://bugs.freedesktop.org/show_bug.cgi?id=110897
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Richard Thier <u9vata@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 044e59a85c4d84e3c8d004c486e5c479640563a6)
Cc: stable@vger.kernel.org
|
|
Mateusz Guzik <mjguzik@gmail.com> says:
The stock kernel transitioning the file to no refs held penalizes the
caller with an extra atomic to block any increments.
For cases where the file is highly likely to be going away this is
easily avoidable.
In the open+close case the win is very modest because of the following
problems:
- kmem and memcg having terrible performance
- putname using an atomic (I have a wip to whack that)
- open performing an extra ref/unref on the dentry (there are patches to
do it, including by Al. I mailed about them in [1])
- creds using atomics (I have a wip to whack that)
- apparmor using atomics (ditto, same mechanism)
On top of that I have a WIP patch to dodge some of the work at lookup
itself.
All in all there is several % avoidably lost here.
stats colected during a kernel build with:
bpftrace -e 'kprobe:filp_close,kprobe:fput,kprobe:fput_close* { @[probe] = hist(((struct file *)arg0)->f_ref.refcnt.counter > 0); }'
@[kprobe:filp_close]:
[0] 32195 |@@@@@@@@@@ |
[1] 164567 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
@[kprobe:fput]:
[0] 339240 |@@@@@@ |
[1] 2888064 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
@[kprobe:fput_close]:
[0] 5116767 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[1] 164544 |@ |
@[kprobe:fput_close_sync]:
[0] 5340660 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[1] 358943 |@@@ |
0 indicates the last reference, 1 that there is more.
filp_close is largely skewed because of close_on_exec.
vast majority of last fputs are from remove_vma. I think that code wants
to be patched to batch them (as in something like fput_many should be
added -- something for later).
[1] https://lore.kernel.org/linux-fsdevel/20250304165728.491785-1-mjguzik@gmail.com/T/#u
* patches from https://lore.kernel.org/r/20250305123644.554845-1-mjguzik@gmail.com:
fs: use fput_close() in path_openat()
fs: use fput_close() in filp_close()
fs: use fput_close_sync() in close()
file: add fput and file_ref_put routines optimized for use when closing a fd
Link: https://lore.kernel.org/r/20250305123644.554845-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This bumps failing open rate by 1.7% on Sapphire Rapids by avoiding one
atomic.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250305123644.554845-5-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When tracing a kernel build over refcounts seen this is a wash:
@[kprobe:filp_close]:
[0] 32195 |@@@@@@@@@@ |
[1] 164567 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
I verified vast majority of the skew comes from do_close_on_exec() which
could be changed to use a different variant instead.
Even without changing that, the 19.5% of calls which got here still can
save the extra atomic. Calls here are borderline non-existent compared
to fput (over 3.2 mln!), so they should not negatively affect
scalability.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250305123644.554845-4-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This bumps open+close rate by 1% on Sapphire Rapids by eliding one
atomic.
It would be higher if it was not for several other slowdowns of the same
nature.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250305123644.554845-3-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Vast majority of the time closing a file descriptor also operates on the
last reference, where a regular fput usage will result in 2 atomics.
This can be changed to only suffer 1.
See commentary above file_ref_put_close() for more information.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250305123644.554845-2-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|