| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull core dumping fix from Kees Cook:
- Only sort VMAs when core_sort_vma sysctl is set
* tag 'execve-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
coredump: Only sort VMAs when core_sort_vma sysctl is set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix leaked extent map after error when reading chunks
- replace use of deprecated strncpy
- in zoned mode, fixed range when ulocking extent range, causing a hang
* tag 'for-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix a leaked chunk map issue in read_one_chunk()
btrfs: replace deprecated strncpy() with strscpy()
btrfs: zoned: fix extent range end unlock in cow_file_range()
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- TCP use after free fix on polling (Sagi)
- Controller memory buffer cleanup fixes (Icenowy)
- Free leaking requests on bad user passthrough commands (Keith)
- TCP error message fix (Maurizio)
- TCP corruption fix on partial PDU (Maurizio)
- TCP memory ordering fix for weakly ordered archs (Meir)
- Type coercion fix on message error for TCP (Dan)
- Name the RQF flags enum, fixing issues with anon enums and BPF import
of it
- ublk parameter setting fix
- GPT partition 7-bit conversion fix
* tag 'block-6.14-20250306' of git://git.kernel.dk/linux:
block: Name the RQF flags enum
nvme-tcp: fix signedness bug in nvme_tcp_init_connection()
block: fix conversion of GPT partition name to 7-bit
ublk: set_params: properly check if parameters can be applied
nvmet-tcp: Fix a possible sporadic response drops in weakly ordered arch
nvme-tcp: fix potential memory corruption in nvme_tcp_recv_pdu()
nvme-tcp: Fix a C2HTermReq error message
nvmet: remove old function prototype
nvme-ioctl: fix leaked requests on mapping error
nvme-pci: skip CMB blocks incompatible with PCI P2P DMA
nvme-pci: clean up CMBMSC when registering CMB fails
nvme-tcp: fix possible UAF in nvme_tcp_poll
|
|
Pull io_uring fix from Jens Axboe:
"A single fix for a regression introduced in the 6.14 merge window,
causing stalls/hangs with IOPOLL reads or writes"
* tag 'io_uring-6.14-20250306' of git://git.kernel.dk/linux:
io_uring/rw: ensure reissue path is correctly handled for IOPOLL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc scheduler fixes from Ingo Molnar:
- Fix deadline scheduler sysctl parameter setting bug
- Fix RT scheduler sysctl parameter setting bug
- Fix possible memory corruption in child_cfs_rq_on_list()
* tag 'sched-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Update limit of sched_rt sysctl in documentation
sched/deadline: Use online cpus for validating runtime
sched/fair: Fix potential memory corruption in child_cfs_rq_on_list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Fix a race between PMU registration and event creation, and fix
pmus_lock vs. pmus_srcu lock ordering"
* tag 'perf-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix perf_pmu_register() vs. perf_init_event()
perf/core: Fix pmus_lock vs. pmus_srcu ordering
|
|
Add the remaining SHF_ flags, as listed in the "Executable and
Linkable Format" Wikipedia page and the System V Application Binary
Interface[1]. This allows drivers to load and parse ELF images that use
some of those flags.
In particular, an upcoming change to the Nouveau GPU driver will
use some of the flags.
Link: https://refspecs.linuxfoundation.org/elf/gabi4+/ch4.sheader.html#sh_flags [1]
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250307171417.267488-1-ttabi@nvidia.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix CPUID leaf 0x2 parsing bugs
- Sanitize very early boot parameters to avoid crash
- Fix size overflows in the SGX code
- Make CALL_NOSPEC use consistent
* tag 'x86-urgent-2025-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Sanitize boot params before parsing command line
x86/sgx: Fix size overflows in sgx_encl_create()
x86/cpu: Properly parse CPUID leaf 0x2 TLB descriptor 0x63
x86/cpu: Validate CPUID leaf 0x2 EDX output
x86/cacheinfo: Validate CPUID leaf 0x2 EDX output
x86/speculation: Add a conditional CS prefix to CALL_NOSPEC
x86/speculation: Simplify and make CALL_NOSPEC consistent
|
|
Similarly to what was done with the memcpy() routines, make
copy_to_user(), copy_from_user() and clear_user() also use the Armv8.8
FEAT_MOPS instructions.
Both MOPS implementation options (A and B) are supported, including
asymmetric systems. The exception fixup code fixes up the registers
according to the option used.
In case of a fault the routines return precisely how much was not copied
(as required by the comment in include/linux/uaccess.h), as unprivileged
versions of CPY/SET are guaranteed not to have written past the
addresses reported in the GPRs.
The MOPS instructions could possibly be inlined into callers (and
patched to branch to the generic implementation if not detected;
similarly to what x86 does), but as a first step this patch just uses
them in the out-of-line routines.
Signed-off-by: Kristina Martšenko <kristina.martsenko@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250228170006.390100-4-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
A subsequent patch will use CPY* instructions to copy between user and
kernel memory. Add handling for PAN faults caused by an intended kernel
memory access erroneously accessing user memory, in order to make it
easier to debug kernel bugs and to keep the same behavior as with
regular loads/stores.
Signed-off-by: Kristina Martšenko <kristina.martsenko@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250228170006.390100-3-kristina.martsenko@arm.com
[catalin.marinas@arm.com: Folded the extable search into insn_may_access_user()]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This reverts commit 4d94f05558271654670d18c26c912da0c1c15549 which has
problems (see [1]) and is no longer needed since 581dd2dc168f
("Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating")
has reworked the code where the original bug has been found.
[1] Link: https://lore.kernel.org/linux-bluetooth/877c55ci1r.wl-tiwai@suse.de/T/#t
Fixes: 4d94f0555827 ("Bluetooth: hci_core: Fix sleeping function called from invalid context")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- xgene-hwmon: Fix a NULL vs IS_ERR_OR_NULL() check
- ad7314: Return error if leading zero bits are non-zero
- ntc_thermistor: Update/fix the ncpXXxh103 sensor table
- pmbus: Initialise page count in pmbus_identify()
- peci/dimmtemp: Do not provide fake threshold data
* tag 'hwmon-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: fix a NULL vs IS_ERR_OR_NULL() check in xgene_hwmon_probe()
hwmon: (ad7314) Validate leading zero bits and return error
hwmon: (ntc_thermistor) Fix the ncpXXxh103 sensor table
hwmon: (pmbus) Initialise page count in pmbus_identify()
hwmon: (peci/dimmtemp) Do not provide fake thresholds data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- protect gpio-aggregator against module unload
- use raw spinlock in gpio-rcar to fix a lockdep splat
- fix OF node leak in gpio-rcar
* tag 'gpio-fixes-for-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: rcar: Fix missing of_node_put() call
gpio: rcar: Use raw_spinlock to protect register access
gpio: aggregator: protect driver attr handlers against module unload
|
|
Passive scanning shall only be enabled when disconnecting LE links,
otherwise it may start result in triggering scanning when e.g. an ISO
link disconnects:
> HCI Event: LE Meta Event (0x3e) plen 29
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 257
CIG Synchronization Delay: 0 us (0x000000)
CIS Synchronization Delay: 0 us (0x000000)
Central to Peripheral Latency: 10000 us (0x002710)
Peripheral to Central Latency: 10000 us (0x002710)
Central to Peripheral PHY: LE 2M (0x02)
Peripheral to Central PHY: LE 2M (0x02)
Number of Subevents: 1
Central to Peripheral Burst Number: 1
Peripheral to Central Burst Number: 1
Central to Peripheral Flush Timeout: 2
Peripheral to Central Flush Timeout: 2
Central to Peripheral MTU: 320
Peripheral to Central MTU: 160
ISO Interval: 10.00 msec (0x0008)
...
> HCI Event: Disconnect Complete (0x05) plen 4
Status: Success (0x00)
Handle: 257
Reason: Remote User Terminated Connection (0x13)
< HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
Fixes: 9fcb18ef3acb ("Bluetooth: Introduce LE auto connect options")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
sco_conn refcount shall not be incremented a second time if the sk
already owns the refcount, so hold only when adding new chan.
Add sco_conn_hold() for clarity, as refcnt is never zero here due to the
sco_conn_add().
Fixes SCO socket shutdown not actually closing the SCO connection.
Fixes: ed9588554943 ("Bluetooth: SCO: remove the redundant sco_conn_put")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Automatically configure the altsetting for HCI_USER_CHANNEL when a SCO
is connected.
The motivation is to enable the HCI_USER_CHANNEL user to send out SCO
data through USB Bluetooth chips, which is mainly used for bidirectional
audio transfer (voice call). This was not capable because:
- Per Bluetooth Core Spec v5, Vol 4, Part B, 2.1, the corresponding
alternate setting should be set based on the air mode in order to
transfer SCO data, but
- The Linux Bluetooth HCI_USER_CHANNEL exposes the Bluetooth Host
Controller Interface to the user space, which is something above the
USB layer. The user space is not able to configure the USB alt while
keeping the channel open.
This patch intercepts the HCI_EV_SYNC_CONN_COMPLETE packets in btusb,
extracts the air mode, and configures the alt setting in btusb.
This patch is tested on ChromeOS devices. The USB Bluetooth models
(CVSD, TRANS alt3 and alt6) could work without a customized kernel.
Fixes: b16b327edb4d ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/pmf:
- Initialize 'cb_mutex'
- Support for new version of PMF-TA
- intel-hid: Fix volume buttons on Microsoft Surface Go 4 tablet
- intel/vsec: Add Diamond Rapids support
- thinkpad_acpi: Add battery quirk for ThinkPad X131e
* tag 'platform-drivers-x86-v6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmf: Update PMF Driver for Compatibility with new PMF-TA
platform/x86/amd/pmf: Propagate PMF-TA return codes
platform/x86/intel/vsec: Add Diamond Rapids support
platform/x86: thinkpad_acpi: Add battery quirk for ThinkPad X131e
platform/x86: intel-hid: fix volume buttons on Microsoft Surface Go 4 tablet
platform/x86/amd/pmf: Initialize and clean up `cb_mutex`
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"There is a single change in ALSA core (for sequencer code for the
module auto-loading in a wrong timing) while the all rest are various
HD- and USB-audio fixes.
Many of them are boring device-specific quirks, and should be safe to
take"
* tag 'sound-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add support for ASUS Zenbook UM3406KA Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS B5405 and B5605 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS B3405 and B3605 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for various ASUS Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix G614 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix GA603 Laptops using CS35L41 HDA
ALSA: hda/realtek: Add support for ASUS ROG Strix G814 Laptop using CS35L41 HDA
ALSA: hda: intel: Add Dell ALC3271 to power_save denylist
ALSA: hda/realtek: update ALC222 depop optimize
ALSA: hda: realtek: fix incorrect IS_REACHABLE() usage
ALSA: usx2y: validate nrpacks module parameter on probe
ALSA: hda/realtek - add supported Mic Mute LED for Lenovo platform
ALSA: seq: Avoid module auto-load handling at event delivery
ALSA: hda: Fix speakers on ASUS EXPERTBOOK P5405CSA 1.0
ALSA: hda/realtek: Fix Asus Z13 2025 audio
ALSA: hda/realtek: Remove (revert) duplicate Ally X config
|
|
Starting with the upcoming Rust 1.86.0 (to be released 2025-04-03),
Clippy warns:
error: doc list item overindented
--> drivers/gpu/drm/drm_panic_qr.rs:914:5
|
914 | /// will be encoded as binary segment, otherwise it will be encoded
| ^^^ help: try using ` ` (2 spaces)
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_overindented_list_items
The overindentation is slightly hard to notice, since all the items
start with a backquote that makes it look OK, but it is there.
Thus fix it.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fixes: cb5164ac43d0 ("drm/panic: Add a QR code panic screen")
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250301231602.917580-2-ojeda@kernel.org
|
|
Starting with the upcoming Rust 1.86.0 (to be released 2025-04-03),
Clippy warns:
error: manually reimplementing `div_ceil`
--> drivers/gpu/drm/drm_panic_qr.rs:548:26
|
548 | let pad_offset = (offset + 7) / 8;
| ^^^^^^^^^^^^^^^^ help: consider using `.div_ceil()`: `offset.div_ceil(8)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_div_ceil
And similarly for `stride`. Thus apply the suggestion to both.
The behavior (and thus codegen) is not exactly equivalent [1][2], since
`div_ceil()` returns the right value for the values that currently
would overflow.
Link: https://github.com/rust-lang/rust-clippy/issues/14333 [1]
Link: https://godbolt.org/z/dPq6nGnv3 [2]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fixes: cb5164ac43d0 ("drm/panic: Add a QR code panic screen")
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250301231602.917580-1-ojeda@kernel.org
|
|
A subsequent patch will use CPY* instructions to copy between user and
kernel memory. Add a new exception fixup type to avoid fixing up faults
on kernel memory accesses, in order to make it easier to debug kernel
bugs and to keep the same behavior as with regular loads/stores.
Signed-off-by: Kristina Martšenko <kristina.martsenko@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250228170006.390100-2-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Compared to the SNP Guest Request, the "Extended" version adds data pages for
receiving certificates. If not enough pages provided, the HV can report to the
VM how much is needed so the VM can reallocate and repeat.
Commit
ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
moved handling of the allocated/desired pages number out of scope of said
mutex and create a possibility for a race (multiple instances trying to
trigger Extended request in a VM) as there is just one instance of
snp_msg_desc per /dev/sev-guest and no locking other than snp_cmd_mutex.
Fix the issue by moving the data blob/size and the GHCB input struct
(snp_req_data) into snp_guest_req which is allocated on stack now and accessed
by the GHCB caller under that mutex.
Stop allocating SEV_FW_BLOB_MAX_SIZE in snp_msg_alloc() as only one of four
callers needs it. Free the received blob in get_ext_report() right after it is
copied to the userspace. Possible future users of snp_send_guest_request() are
likely to have different ideas about the buffer size anyways.
Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307013700.437505-3-aik@amd.com
|
|
Commit
ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
narrowed the command mutex scope to snp_send_guest_request(). However,
GET_REPORT, GET_DERIVED_KEY, and GET_EXT_REPORT share the req structure in
snp_guest_dev. Without the mutex protection, concurrent requests can overwrite
each other's data. Fix it by dynamically allocating the request structure.
Fixes: ae596615d93d ("virt: sev-guest: Reduce the scope of SNP command mutex")
Closes: https://github.com/AMDESE/AMDSEV/issues/265
Reported-by: andreas.stuehrk@yaxi.tech
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307013700.437505-2-aik@amd.com
|
|
Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results
in the following warning:
unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0)
Call Trace:
xen_read_msr+0x1e/0x30
amd_get_mmconfig_range+0x2b/0x80
quirk_amd_mmconfig_area+0x28/0x100
pnp_fixup_device+0x39/0x50
__pnp_add_device+0xf/0x150
pnp_add_device+0x3d/0x100
pnpacpi_add_device_handler+0x1f9/0x280
acpi_ns_get_device_callback+0x104/0x1c0
acpi_ns_walk_namespace+0x1d0/0x260
acpi_get_devices+0x8a/0xb0
pnpacpi_init+0x50/0x80
do_one_initcall+0x46/0x2e0
kernel_init_freeable+0x1da/0x2f0
kernel_init+0x16/0x1b0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the
right course of action, so no change is needed there.
This was most likely exposed by fixing the Xen MSR accessors to not be
silently-safe.
Fixes: 3fac3734c43a ("xen/pv: support selecting safe/unsafe msr accesses")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250307002846.3026685-1-andrew.cooper3@citrix.com
|
|
If the warning mode with disabled mitigation mode is used, then on each
CPU where the split lock occurred detection will be disabled in order to
make progress and delayed work will be scheduled, which then will enable
detection back.
Now it turns out that all CPUs use one global delayed work structure.
This leads to the fact that if a split lock occurs on several CPUs
at the same time (within 2 jiffies), only one CPU will schedule delayed
work, but the rest will not.
The return value of schedule_delayed_work_on() would have shown this,
but it is not checked in the code.
A diagram that can help to understand the bug reproduction:
- sld_update_msr() enables/disables SLD on both CPUs on the same core
- schedule_delayed_work_on() internally checks WORK_STRUCT_PENDING_BIT.
If a work has the 'pending' status, then schedule_delayed_work_on()
will return an error code and, most importantly, the work will not
be placed in the workqueue.
Let's say we have a multicore system on which split_lock_mitigate=0 and
a multithreaded application is running that calls splitlock in multiple
threads. Due to the fact that sld_update_msr() affects the entire core
(both CPUs), we will consider 2 CPUs from different cores. Let the 2
threads of this application schedule to CPU0 (core 0) and to CPU 2
(core 1), then:
| || |
| CPU 0 (core 0) || CPU 2 (core 1) |
|_________________________________||___________________________________|
| || |
| 1) SPLIT LOCK occured || |
| || |
| 2) split_lock_warn() || |
| || |
| 3) sysctl_sld_mitigate == 0 || |
| (work = &sl_reenable) || |
| || |
| 4) schedule_delayed_work_on() || |
| (reenable will be called || |
| after 2 jiffies on CPU 0) || |
| || |
| 5) disable SLD for core 0 || |
| || |
| ------------------------- || |
| || |
| || 6) SPLIT LOCK occured |
| || |
| || 7) split_lock_warn() |
| || |
| || 8) sysctl_sld_mitigate == 0 |
| || (work = &sl_reenable, |
| || the same address as in 3) ) |
| || |
| 2 jiffies || 9) schedule_delayed_work_on() |
| || fials because the work is in |
| || the pending state since 4). |
| || The work wasn't placed to the |
| || workqueue. reenable won't be |
| || called on CPU 2 |
| || |
| || 10) disable SLD for core 0 |
| || |
| || From now on SLD will |
| || never be reenabled on core 1 |
| || |
| ------------------------- || |
| || |
| 11) enable SLD for core 0 by || |
| __split_lock_reenable || |
| || |
If the application threads can be scheduled to all processor cores,
then over time there will be only one core left, on which SLD will be
enabled and split lock will be able to be detected; and on all other
cores SLD will be disabled all the time.
Most likely, this bug has not been noticed for so long because
sysctl_sld_mitigate default value is 1, and in this case a semaphore
is used that does not allow 2 different cores to have SLD disabled at
the same time, that is, strictly only one work is placed in the
workqueue.
In order to fix the warning mode with disabled mitigation mode,
delayed work has to be per-CPU. Implement it.
Fixes: 727209376f49 ("x86/split_lock: Add sysctl to control the misery mode")
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250115131704.132609-1-davydov-max@yandex-team.ru
|
|
Kenneth noticed that his laptop crashes randomly when resuming from
hibernate if there is device connected and display tunneled. I was able
to reproduce this as well with the following steps:
1. Boot the system up, nothing connected.
2. Connect Thunderbolt 4 dock to the host.
3. Connect monitor to the Thunderbolt 4 dock.
4. Verify that there is picture on the screen.
5. Enter hibernate.
6. Exit hibernate.
7. Wait for the system to resume.
Expectation: System resumes just fine, the connected monitor still
shows screen.
Actual result: There is crash during resume, screen is blank.
What happens is that during resume from hibernate we tear down any
existing tunnels created by the boot kernel and this ends up calling
tb_dp_dprx_stop() which calls tb_tunnel_put() dropping the reference
count to zero even though we never called tb_dp_dprx_start() for it (we
never do that for discovery). This makes the discovered DP tunnel memory
to be released and any access after that causes use-after-free and
possible crash.
Fix this so that we only stop DPRX flow if it has been started in the
first place.
Reported-by: Kenneth Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/linux-usb/8e175721-806f-45d6-892a-bd3356af80c9@panix.com/
Cc: stable@vger.kernel.org
Fixes: d6d458d42e1e ("thunderbolt: Handle DisplayPort tunnel activation asynchronously")
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The commit titled "block/bdev: lift block size restrictions to 64k"
lifted the block layer's max supported block size to 64k inside the
helper blk_validate_block_size() now that we support large folios.
However in lifting the block size we also removed the silly use
cases many filesystems have to use sb_set_blocksize() to *verify*
that the block size <= PAGE_SIZE. The call to sb_set_blocksize() was
used to check the block size <= PAGE_SIZE since historically we've
always supported userspace to create for example 64k block size
filesystems even on 4k page size systems, but what we didn't allow
was mounting them. Older filesystems have been using the check with
sb_set_blocksize() for years.
While, we could argue that such checks should be filesystem specific,
there are much more users of sb_set_blocksize() than LBS enabled
filesystem on upstream, so just do the easier thing and bring back
the PAGE_SIZE check for sb_set_blocksize() users and only skip it
for LBS enabled filesystems.
This will ensure that tests such as generic/466 when run in a loop
against say, ext4, won't try to try to actually mount a filesystem with
a block size larger than your filesystem supports given your PAGE_SIZE
and in the worst case crash.
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250307020403.3068567-1-mcgrof@kernel.org
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
A wiphy_work can be queued from the moment the wiphy is allocated and
initialized (i.e. wiphy_new_nm). When a wiphy_work is queued, the
rdev::wiphy_work is getting queued.
If wiphy_free is called before the rdev::wiphy_work had a chance to run,
the wiphy memory will be freed, and then when it eventally gets to run
it'll use invalid memory.
Fix this by canceling the work before freeing the wiphy.
Fixes: a3ee4dc84c4e ("wifi: cfg80211: add a work abstraction with special semantics")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306123626.efd1d19f6e07.I48229f96f4067ef73f5b87302335e2fd750136c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When MLO is used and SA Query processing isn't done by
userspace (e.g. wpa_supplicant w/o CONFIG_OCV), then
the mac80211 code kicks in but uses the wrong addresses.
Fix them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.bab48bb49061.I9391b22f1360d20ac8c4e92604de23f27696ba8f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The refactoring of the assoc link handling in order to
support multi-link reconfiguration broke the setting
of the assoc link ID, and thus resulted in the wrong
BSS "use_for" value being selected. Fix that for both
association and ML reconfiguration.
Fixes: 720fa448f5a7 ("wifi: nl80211: Split the links handling of an association request")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.7b233d769c32.I62fd04a8667dd55cedb9a1c0414cc92dd098da75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The worker really shouldn't be queued for a non-running interface.
Also, if ieee80211_setup_sdata is called between queueing and executing
the wk, it will be initialized, which will corrupt wiphy_work_list.
Fixes: f8891461a277 ("mac80211: do not start any work during reconfigure flow")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306123626.1e02caf82640.I4949e71ed56e7186ed4968fa9ddff477473fa2f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We first want to flush the station to make sure we no longer have any
frames being Tx by the station before the station is moved to
un-authorized state. Failing to do that will lead to races: a frame may
be sent after the station's state has been changed.
Since the API clearly states that the driver can't fail the sta_state()
transition down the list of state, we can easily flush the station
first, and only then call the driver's sta_state().
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306123626.450bc40e8b04.I636ba96843c77f13309c15c9fd6eb0c5a52a7976@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the restart work happens to run after the opmode left
(i.e. called iwl_trans_op_mode_leave), then the opmode memory (including
its mutex) is likely to be freed already, and trans->opmode is NULL.
Although the hw is stopped in that stage, which means that this restart
got aborted (i.e. STATUS_RESET_PENDING will be cleared),
it still can access trans->opmode (NULL pointer dereference)
or the opmodes memory (which is freed).
Fix this by canceling the restart wk in iwl_trans_op_mode_leave.
Also make sure that the restart wk is really aborted.
Fixes: 7391b2a4f7db ("wifi: iwlwifi: rework firmware error handling")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250306122425.801301ba1b8b.I6f6143f550b6335b699920c5d4b2b78449607a96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When MSI-X is not enabled, we mask all the interrupts in the interrupt
handler and re-enable them when the interrupt thread runs. If
STATUS_INT_ENABLED is not set, we won't re-enable in the thread.
In order to get the ALIVE interrupt, we allow the ALIVE interrupt
itself, and RX as well in order to receive the ALIVE notification (which
is received as an RX from the firmware.
The problem is that STATUS_INT_ENABLED is clear until the op_mode calls
trans_fw_alive which means that until trans_fw_alive is called, any
notification from the firmware will not be received.
This became a problem when we inserted the pnvm_load exactly between the
ALIVE and trans_fw_alive.
Fix that by calling trans_fw_alive before loading the PNVM. This will
allow to get the notification from the firmware about PNVM load being
complete and continue the flow normally.
This didn't happen on MSI-X because we don't disable the interrupts in
the ISR when MSI-X is available.
The error in the log looks like this:
iwlwifi 0000:00:03.0: Timeout waiting for PNVM load!
iwlwifi 0000:00:03.0: Failed to start RT ucode: -110
iwlwifi 0000:00:03.0: WRT: Collecting data: ini trigger 13 fired (delay=0ms).
Fixes: 70d3ca86b025 ("iwlwifi: mvm: ring the doorbell and wait for PNVM load completion")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306122425.0f2cf207aae1.I025d8f724b44f52eadf6c19069352eb9275613a8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The allocation of the scatter gather data structure should be done
based on the number of memory chunks that need to be mapped, and it
is not dependent on the overall payload length. Fix it.
In addition, as the skb_to_sgvec() function returns an 'int' do not
assign it to an 'unsigned int' as otherwise the error check would be
useless.
Fixes: 7f5e3038f029 ("wifi: iwlwifi: map entire SKB when sending AMSDUs")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306122425.8c0e23a3d583.I3cb4d6768c9d28ce3da6cd0a6c65466176cfc1ee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since I really don't want to be CC'ed on every patch
add X: entries for all the drivers that are otherwise
covered. In some cases, add a bit more to drivers that
have other entries, mostly for the vendor directories,
but for libertas also add libertas_tf.
While at it, also add all nl80211-related (vendor)
UAPI header files to the nl80211 entry.
Link: https://patch.msgid.link/20250306092831.f7fdfe7df7b2.I7c86da443038af32e9bcbaa5f53b1e4128a0d1f9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The irqsteer IP routes groups of input interrupts to a dedicated system
interrupt per group. Each group handles 64 input interrupts.
The current driver is limited to 8 groups, i.e. 512 input interrupts, which
is sufficient for the existing i.MX SoCs. The upcoming i.MX94 family
extends the irqsteer IP to 15 groups, i.e. 960 interrupts.
Extending the group limit to 15 enables this, but the new SoCs are not
guaranteed to utilize all 15 groups. Unused groups have no mapping for the
underlying output interrupt, which makes the probe function fail as it
expects a valid mapping for each group output.
Remove this limitation and stop the mapping loop, when no valid mapping is
detected.
[ tglx: Massage change log ]
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/all/20250305095522.2177843-1-ping.bai@nxp.com
|
|
The NMI controller in the Allwinner A523 is almost compatible to the
previous versions of this IP, but requires the extra bit 31 to be set in
the enable register to actually report the NMI.
Add a mask to allow such an enable bit to be specified, and add this to
the per-SoC data structure. As this struct was just for different register
offsets so far, it was consequently named "reg_offs", which is now no
longer applicable, so rename this to the more generic "data" on the way,
and move the existing offsets into a struct of its own.
Also add the respective Allwinner A523 compatible string, and set bit 31
in its enable mask, to add support for this SoC.
[ tglx: Mop up some coding style along with it ]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250307005712.16828-7-andre.przywara@arm.com
|
|
The Allwinner A523 SoC contains an NMI controller very close to the one
used in the recent Allwinner SoCs, but it adds another bit that needs to
be toggled to actually deliver the IRQs. Sigh.
Add the A523 specific name to the list of allowed compatible strings.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20250307005712.16828-6-andre.przywara@arm.com
|
|
The execution order of constructors in undefined and depends on the
toolchain. While recent toolchains seems to have a stable order, it
doesn't work for older ones and may also change at any time.
Stop validating the order and instead only validate that all
constructors are executed.
Reported-by: Willy Tarreau <w@1wt.eu>
Closes: https://lore.kernel.org/lkml/20250301110735.GA18621@1wt.eu/
Link: https://lore.kernel.org/r/20250306-nolibc-constructor-order-v1-1-68fd161cc5ec@weissschuh.net
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The fix to atomically read the pipe head and tail state when not holding
the pipe mutex has caused a number of headaches due to the size change
of the involved types.
It turns out that we don't have _that_ many places that access these
fields directly and were affected, but we have more than we strictly
should have, because our low-level helper functions have been designed
to have intimate knowledge of how the pipes work.
And as a result, that random noise of direct 'pipe->head' and
'pipe->tail' accesses makes it harder to pinpoint any actual potential
problem spots remaining.
For example, we didn't have a "is the pipe full" helper function, but
instead had a "given these pipe buffer indexes and this pipe size, is
the pipe full". That's because some low-level pipe code does actually
want that much more complicated interface.
But most other places literally just want a "is the pipe full" helper,
and not having it meant that those places ended up being unnecessarily
much too aware of this all.
It would have been much better if only the very core pipe code that
cared had been the one aware of this all.
So let's fix it - better late than never. This just introduces the
trivial wrappers for "is this pipe full or empty" and to get how many
pipe buffers are used, so that instead of writing
if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
the places that literally just want to know if a pipe is full can just
say
if (pipe_is_full(pipe))
instead. The existing trivial cases were converted with a 'sed' script.
This cuts down on the places that access pipe->head and pipe->tail
directly outside of the pipe code (and core splice code) quite a lot.
The splice code in particular still revels in doing the direct low-level
accesses, and the fuse fuse_dev_splice_write() code also seems a bit
unnecessarily eager to go very low-level, but it's at least a bit better
than it used to be.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull drm fixes from Dave Airlie:
"Fixes across the board, mostly xe and imagination with some amd and
misc others.
The xe fixes are mostly hmm related, though there are some others in
there as well, nothing really stands out otherwise.
The nouveau Kconfig to select FW_CACHE is in this, which we discussed
a while back.
nouveau:
- rely on fw caching Kconfig fix
imagination:
- avoid deadlock on fence release
- fix fence initialisation
- fix timestamps firmware traces
scheduler:
- fix include guard
bochs:
- dpms fix
i915:
- bump max stream count to match pipes
xe:
- Remove double page flip on initial plane
- Properly setup userptr pfn_flags_mask
- Fix GT "for each engine" workarounds
- Fix userptr races and missed validations
- Userptr invalid page access fixes
- Cleanup some style nits
amdgpu:
- Fix NULL check in DC code
- SMU 14 fix
amdkfd:
- Fix NULL check in queue validation
radeon:
- RS400 HyperZ fix"
* tag 'drm-fixes-2025-03-07' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
drm/bochs: Fix DPMS regression
drm/xe/userptr: Unmap userptrs in the mmu notifier
drm/xe/hmm: Don't dereference struct page pointers without notifier lock
drm/xe/hmm: Style- and include fixes
drm/xe: Add staging tree for VM binds
drm/xe: Fix fault mode invalidation with unbind
drm/xe/vm: Fix a misplaced #endif
drm/xe/vm: Validate userptr during gpu vma prefetching
drm/amd/pm: always allow ih interrupt from fw
drm/radeon: Fix rs400_gpu_init for ATI mobility radeon Xpress 200M
drm/amdkfd: Fix NULL Pointer Dereference in KFD queue
drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params
drm/xe: Fix GT "for each engine" workarounds
drm/xe/userptr: properly setup pfn_flags_mask
drm/i915/mst: update max stream count to match number of pipes
drm/xe: Remove double pageflip
drm/sched: Fix preprocessor guard
drm/imagination: Fix timestamps in firmware traces
drm/imagination: only init job done fences once
drm/imagination: Hold drm_gem_gpuva lock for unmap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix racy non-atomic read-then-increment operation with
PREEMPT_RT in nft_ct, from Sebastian Andrzej Siewior.
2) GC is not skipped when jiffies wrap around in nf_conncount,
from Nicklas Bo Jensen.
3) flush_work() on nf_tables_destroy_work waits for the last queued
instance, this could be an instance that is different from the one
that we must wait for, then make destruction work queue.
* tag 'nf-25-03-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: make destruction work queue pernet
netfilter: nf_conncount: garbage collection is not skipped when jiffies wrap around
netfilter: nft_ct: Use __refcount_inc() for per-CPU nft_ct_pcpu_template.
====================
Link: https://patch.msgid.link/20250306153446.46712-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 5f89154e8e9e3445f9b59 ("block: Use enum to define RQF_x bit
indexes") converted the RQF flags to an anonymous enum, which was
a beneficial change. This patch goes one step further by naming the enum
as "rqf_flags".
This naming enables exporting these flags to BPF clients, eliminating
the need to duplicate these flags in BPF code. Instead, BPF clients can
now access the same kernel-side values through CO:RE (Compile Once, Run
Everywhere), as shown in this example:
rqf_stats = bpf_core_enum_value(enum rqf_flags, __RQF_STATS)
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20250306-rqf_flags-v1-1-bbd64918b406@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The paravirtual implementation ID stuffs is 64-bit only and broke 32bit
arm builds. Slap an ifdef bandaid on the situation to get things rolling
again.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
If kzalloc in gred_init returns a NULL pointer, the code follows the
error handling path, invoking gred_destroy. This, in turn, calls
gred_offload, where memset could receive a NULL pointer as input,
potentially leading to a kernel crash.
When table->opt is NULL in gred_init(), gred_change_table_def()
is not called yet, so it is not necessary to call ->ndo_setup_tc()
in gred_offload().
Signed-off-by: Jun Yang <juny24602@gmail.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes: f25c0515c521 ("net: sched: gred: dynamically allocate tc_gred_qopt_offload")
Link: https://patch.msgid.link/20250305154410.3505642-1-juny24602@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-03-05 (ice)
This series contains updates to ice driver.
Larysa removes modification of destination override that caused LLDP
packets to be blocked.
Grzegorz fixes a memory leak in aRFS.
Marcin resolves an issue with operation of switchdev and LAG.
Przemek adjusts order of calls for registering devlink in relation to
health reporters.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: register devlink prior to creating health reporters
ice: Fix switchdev slow-path in LAG
ice: fix memory leak in aRFS after reset
ice: do not configure destination override for switchdev
====================
Link: https://patch.msgid.link/20250305213549.1514274-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.14-2025-03-06:
amdgpu:
- Fix NULL check in DC code
- SMU 14 fix
amdkfd:
- Fix NULL check in queue validation
radeon:
- RS400 HyperZ fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306193424.27413-1-alexander.deucher@amd.com
|
|
Pull bcachefs fixes from Kent Overstreet:
- Fix a compatibility issue: we shouldn't be setting incompat feature
bits unless explicitly requested
- Fix another bug where the journal alloc/resize path could spuriously
fail with -BCH_ERR_open_buckets_empty
- Copygc shouldn't run on read-only devices: fragmentation isn't an
issue if we're not currently writing to a given device, and it may
not have anywhere to move the data to
* tag 'bcachefs-2025-03-06' of git://evilpiepirate.org/bcachefs:
bcachefs: copygc now skips non-rw devices
bcachefs: Fix bch2_dev_journal_alloc() spuriously failing
bcachefs: Don't set BCH_FEATURE_incompat_version_field unless requested
|
|
There's no point in doing copygc on non-rw devices: the fragmentation
doesn't matter if we're not writing to them, and we may not have
anywhere to put the data on our other devices.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
