summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-07-04ARM: dts: aspeed: harma: add mmc healthPeter Yin
Add a GPIO expander node at address 0x13 on i2c11 bus to monitor MMC health status via a dedicated GPIO line. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://patch.msgid.link/20250611080514.3123335-6-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-07-04ARM: dts: aspeed: Harma: revise gpio bride pin for batteryPeter Yin
Update the GPIO bridge pin configuration for the battery circuit on the Harma platform to reflect the correct hardware design. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://patch.msgid.link/20250611080514.3123335-5-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-07-04ARM: dts: aspeed: harma: add ADC128D818 for voltage monitoringPeter Yin
Add the ADC128D818 device to I2C bus 29 to support voltage monitoring on the Harma platform. This enables accurate measurement of system voltages through the onboard ADC. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://patch.msgid.link/20250611080514.3123335-4-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-07-04ARM: dts: aspeed: harma: add fan board I/O expanderPeter Yin
Add GPIO I/O expander node for the fan board to detect and monitor fan board status. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://patch.msgid.link/20250611080514.3123335-3-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-07-04ARM: dts: aspeed: harma: add E1.S power monitorPeter Yin
Add the E1.S power monitor device node to the Harma device tree to enable power monitoring functionality for E1.S drives. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://patch.msgid.link/20250611080514.3123335-2-peteryin.openbmc@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-07-04ARM: dts: aspeed: catalina: Enable MCTP for frontend NIC managementPotin Lai
Add the `mctp-controller` property and MCTP nodes to enable support for frontend NIC management via PLDM over MCTP. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20250611-catalina-mctp-i2c-10-15-v1-1-2a882e461ed9@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMCWillie Thai
The GB200NVL BMC is an Aspeed Ast2600 based BMC [1] for Nvidia Blackwell GB200NVL platform [2]. Co-developed-by: Mars Yang <maryang@nvidia.com> Signed-off-by: Mars Yang <maryang@nvidia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Cc: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://www.aspeedtech.com/server_ast2600/ [1] Link: https://nvdam.widen.net/s/wwnsxrhm2w/blackwell-datasheet-3384703 [2] Signed-off-by: Willie Thai <wthai@nvidia.com> Link: https://patch.msgid.link/20250401153955.314860-3-wthai@nvidia.com [arj: tidy commit message] Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMCWillie Thai
Add Nvidia's GB200NVL BMC board compatible. Co-developed-by: Mars Yang <maryang@nvidia.com> Signed-off-by: Mars Yang <maryang@nvidia.com> Signed-off-by: Willie Thai <wthai@nvidia.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250401153955.314860-2-wthai@nvidia.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: catalina: Enable MCTP support for NIC managementPotin Lai
Add the `mctp-controller` property and MCTP nodes to enable support for backend NIC management via PLDM over MCTP. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20250321-potin-catalina-dts-update-20250102-v6-10-4bd85efeb9b4@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: catalina: Update CBC FRU EEPROM I2C bus and addressPotin Lai
Revise the I2C bus and address for the Cable Backplane Cartridge (CBC) FRU EEPROM in the Catalina device tree. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20250321-potin-catalina-dts-update-20250102-v6-9-4bd85efeb9b4@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: catalina: Enable multi-master on additional I2C busesPotin Lai
Update the device tree to enable `multi-master` mode on I2C buses shared between the host BMC and the NV module with HMC. This ensures proper bus arbitration and coordination in multi-master environments, preventing communication conflicts and improving reliability. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20250321-potin-catalina-dts-update-20250102-v6-8-4bd85efeb9b4@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: catalina: Remove INA238 and INA230 nodesPotin Lai
Remove INA238 and INA230 power sensor nodes from the device tree (DTS) due to incompatibility with the second-source ISL28022, which shares the same I2C address. Move the driver probe to userspace to handle sensor dynamically. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20250321-potin-catalina-dts-update-20250102-v6-7-4bd85efeb9b4@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: catalina: Add second source HSC node supportPotin Lai
Add device tree nodes for the XDP710 Hot-Swap Controller (HSC) to support the Power Distribution Board (PDB) with a second-source configuration. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20250321-potin-catalina-dts-update-20250102-v6-6-4bd85efeb9b4@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: catalina: Add second source fan controller supportPotin Lai
Add device tree nodes for the NCT7363 fan controllers on the second-source Power Distribution Board (PDB). Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20250321-potin-catalina-dts-update-20250102-v6-5-4bd85efeb9b4@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: catalina: Add fan controller supportPotin Lai
Add device tree nodes for the MAX31790 fan controllers on the Power Distribution Board (PDB). These nodes enable fan speed control and monitoring, improving thermal management and system reliability. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20250321-potin-catalina-dts-update-20250102-v6-4-4bd85efeb9b4@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: catalina: Add MP5990 power sensor nodePotin Lai
Add a device tree node for the MP5990 power sensor to enable monitoring of the P12V supplying power to the fans. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20250321-potin-catalina-dts-update-20250102-v6-3-4bd85efeb9b4@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: catalina: Add Front IO board remote thermal sensorPotin Lai
Add a remote thermal sensor node for the Front IO board in the Catalina platform device tree. This sensor enables monitoring of the inlet temperature. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20250321-potin-catalina-dts-update-20250102-v6-2-4bd85efeb9b4@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: catalina: Add IO Mezz board thermal sensor nodesPotin Lai
Add thermal sensor nodes for the IO Mezzanine (IO Mezz) board in the Catalina platform device tree. These nodes enable temperature monitoring for the backend NIC, improving thermal management and monitoring capabilities. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20250321-potin-catalina-dts-update-20250102-v6-1-4bd85efeb9b4@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: system1: Disable gpio pull downNinad Palsule
Disable internal pull down for the following GPIO lines. - GPIOL4 - Reset PCH registers in the rtc. - GPIOL5 - Reset portition of Intel ME - GPIOL6 - FM smi active - GPIOL7 - psu all dc power good. Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://patch.msgid.link/20250204194115.3899174-10-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: system1: Mark GPIO line high/lowNinad Palsule
- Mark following GPIO lines as input high: - GPIOL4 (reset PCH registers) - GPIOL5 (reset portition of intel ME) - Mark isolate errors from cpu1 gpio (GPIOO6) as active low output. - The fan controller reset line should be active high. Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://patch.msgid.link/20250204194115.3899174-9-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: system1: Remove VRs max8952Ninad Palsule
Removing voltage regulators max8952 from device tree. Those are fully controlled by hardware and firmware should not touch them. Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://patch.msgid.link/20250204194115.3899174-8-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: system1: Update LED gpio nameNinad Palsule
Rename LEDs with meaningful names for easier identification. Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://patch.msgid.link/20250204194115.3899174-7-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: system1: Reduce sgpio speedNinad Palsule
Reduce sgpio speed to improve stability with the current PCB layout. Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://patch.msgid.link/20250204194115.3899174-6-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: system1: Add GPIO line nameNinad Palsule
Add following GPIO line name so that userspace can control them - Flash write override - pch-reset Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://patch.msgid.link/20250204194115.3899174-5-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: system1: Add IPMB deviceNinad Palsule
Add IPMB device sitting behind PCH module Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://patch.msgid.link/20250204194115.3899174-4-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11dt-bindings: ipmi: Add binding for IPMB deviceNinad Palsule
Add device tree binding document for the IPMB device interface. This device is already in use in both driver and .dts files. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Acked-by: Corey Minyard <corey@minyard.net> Link: https://patch.msgid.link/20250204194115.3899174-2-ninad@linux.ibm.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: bletchley: remove unused ethernet-phy nodePotin Lai
Remove the unused `ethernet-phy` node and the `phy-handle` property from the Bletchley device tree. This fixes warnings reported by the kernel DTB checks. Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://patch.msgid.link/20250213-bletchley-dts-fix-v1-1-c953315eb894@gmail.com Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: Align GPIO hog name with bindingsKrzysztof Kozlowski
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it to fix dtbs_check warnings like: aspeed-bmc-lenovo-hr630.dtb: pin_gpio_b5: $nodename:0: 'pin_gpio_b5' does not match '^.+-hog(-[0-9]+)?$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Ninad Palsule <ninad@linux.ibm.com> Link: https://patch.msgid.link/20250116090009.87338-1-krzysztof.kozlowski@linaro.org Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-11ARM: dts: aspeed: Remove swift machineJoel Stanley
This machine is no longer in use, and support was deleted from openbmc in March 2022. Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://patch.msgid.link/20250115112239.430636-1-joel@jms.id.au Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
2025-06-08Linux 6.16-rc1v6.16-rc1Linus Torvalds
2025-06-08Merge tag 'turbostat-2025.06.08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - Add initial DMR support, which required smarter RAPL probe - Fix AMD MSR RAPL energy reporting - Add RAPL power limit configuration output - Minor fixes * tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 2025.06.08 tools/power turbostat: Add initial support for BartlettLake tools/power turbostat: Add initial support for DMR tools/power turbostat: Dump RAPL sysfs info tools/power turbostat: Avoid probing the same perf counters tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared tools/power turbostat: Clean up add perf/msr counter logic tools/power turbostat: Introduce add_msr_counter() tools/power turbostat: Remove add_msr_perf_counter_() tools/power turbostat: Remove add_cstate_perf_counter_() tools/power turbostat: Remove add_rapl_perf_counter_() tools/power turbostat: Quit early for unsupported RAPL counters tools/power turbostat: Always check rapl_joules flag tools/power turbostat: Fix AMD package-energy reporting tools/power turbostat: Fix RAPL_GFX_ALL typo tools/power turbostat: Add Android support for MSR device handling tools/power turbostat.8: pm_domain wording fix tools/power turbostat.8: fix typo: idle_pct should be pct_idle
2025-06-08Merge tag 'timers-cleanups-2025-06-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanup from Thomas Gleixner: "The delayed from_timer() API cleanup: The renaming to the timer_*() namespace was delayed due massive conflicts against Linux-next. Now that everything is upstream finish the conversion" * tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide, timers: Rename from_timer() to timer_container_of()
2025-06-08Merge tag 'x86-urgent-2025-06-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A small set of x86 fixes: - Cure IO bitmap inconsistencies A failed fork cleans up all resources of the newly created thread via exit_thread(). exit_thread() invokes io_bitmap_exit() which does the IO bitmap cleanups, which unfortunately assume that the cleanup is related to the current task, which is obviously bogus. Make it work correctly - A lockdep fix in the resctrl code removed the clearing of the command buffer in two places, which keeps stale error messages around. Bring them back. - Remove unused trace events" * tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex x86/iopl: Cure TIF_IO_BITMAP inconsistencies x86/fpu: Remove unused trace events
2025-06-08Merge tag 'timers-urgent-2025-06-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "Add the missing seq_file forward declaration in the timer namespace header" * tag 'timers-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timens: Add struct seq_file forward declaration
2025-06-08tools/power turbostat: version 2025.06.08Len Brown
Add initial DMR support, which required smarter RAPL probe Fix AMD MSR RAPL energy reporting Add RAPL power limit configuration output Minor fixes Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add initial support for BartlettLakeZhang Rui
Add initial support for BartlettLake. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add initial support for DMRZhang Rui
Add initial support for DMR. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Dump RAPL sysfs infoZhang Rui
for example: intel-rapl:1: psys 28.0s:100W 976.0us:100W intel-rapl:0: package-0 28.0s:57W,max:15W 2.4ms:57W intel-rapl:0/intel-rapl:0:0: core disabled intel-rapl:0/intel-rapl:0:1: uncore disabled intel-rapl-mmio:0: package-0 28.0s:28W,max:15W 2.4ms:57W [lenb: simplified format] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> squish me Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Avoid probing the same perf countersZhang Rui
For the RAPL package energy status counter, Intel and AMD share the same perf_subsys and perf_name, but with different MSR addresses. Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are introduced to describe this counter for different Vendors. As a result, the perf counter is probed twice, and causes a failure in in get_rapl_counters() because expected_read_size and actual_read_size don't match. Fix the problem by skipping the already probed counter. Note, this is not a perfect fix. For example, if different vendors/platforms use the same MSR value for different purpose, the code can be fooled when it probes a rapl_counter_arch_infos[] entry that does not belong to the running Vendor/Platform. In a long run, better to put rapl_counter_arch_infos[] into the platform_features so that this becomes Vendor/Platform specific. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs ↵Zhang Rui
cleared platform_features->rapl_msrs describes the RAPL MSRs supported. While RAPL Perf counters can be exposed from different kernel backend drivers, e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver. Thus, turbostat should first blindly probe all the available RAPL Perf counters, and falls back to the RAPL MSR counters if they are listed in platform_features->rapl_msrs. With this, platforms that don't have RAPL MSRs can clear the platform_features->rapl_msrs bits and use RAPL Perf counters only. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Clean up add perf/msr counter logicZhang Rui
Increase the code readability by moving the no_perf/no_msr flag and the cai->perf_name/cai->msr sanity checks into the counter probe functions. No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Introduce add_msr_counter()Zhang Rui
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR counters and MPERF/APERF/SMI MSR counters, thus its name is misleading. Similar to add_perf_counter(), introduce add_msr_counter() to probe a counter via MSR. Introduce wrapper function add_rapl_msr_counter() at the same time to add extra check for Zero return value for specified RAPL counters. No functional change intended. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Remove add_msr_perf_counter_()Zhang Rui
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter() just gives extra debug output on top. There is no need to keep both functions. Remove add_msr_perf_counter_() and move all the logic to add_msr_perf_counter(). No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Remove add_cstate_perf_counter_()Zhang Rui
As the only caller of add_cstate_perf_counter_(), add_cstate_perf_counter() just gives extra debug output on top. There is no need to keep both functions. Remove add_cstate_perf_counter_() and move all the logic to add_cstate_perf_counter(). No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Remove add_rapl_perf_counter_()Zhang Rui
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter() just gives extra debug output on top. There is no need to keep both functions. Remove add_rapl_perf_counter_() and move all the logic to add_rapl_perf_counter(). No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Quit early for unsupported RAPL countersZhang Rui
Quit early for unsupported RAPL counters. No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Always check rapl_joules flagZhang Rui
rapl_joules bit should always be checked even if platform_features->rapl_msrs is not set or no_msr flag is used. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Fix AMD package-energy reportingGautham R. Shenoy
commit 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf") that adds support to read RAPL counters via perf defines the notion of a RAPL domain_id which is set to physical_core_id on platforms which support per_core_rapl counters (Eg: AMD processors Family 17h onwards) and is set to the physical_package_id on all the other platforms. However, the physical_core_id is only unique within a package and on platforms with multiple packages more than one core can have the same physical_core_id and thus the same domain_id. (For eg, the first cores of each package have the physical_core_id = 0). This results in all these cores with the same physical_core_id using the same entry in the rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the perf-initialization for cores whose domain_ids have already been visited, cores that have the same physical_core_id always read the perf file corresponding to the physical_core_id of the first package and thus the package-energy is incorrectly reported to be the same value for different packages. Note: This issue only arises when RAPL counters are read via perf and not when they are read via MSRs since in the latter case the MSRs are read separately on each core. Fix this issue by associating each CPU with rapl_core_id which is unique across all the packages in the system. Fixes: 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf") Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Fix RAPL_GFX_ALL typoKaushlendra Kumar
Fix typo in the currently unused RAPL_GFX_ALL macro definition. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add Android support for MSR device handlingKaushlendra Kumar
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr, updates error messages and permission checks to reflect the Android device path, and wraps platform-specific code with #if defined(ANDROID) to ensure correct behavior on both Android and non-Android systems. These changes improve compatibility and usability of turbostat on Android devices. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit (git 2.34.1) at 2025-09-11 10:47:19 +0000