| Age | Commit message (Collapse) | Author |
|---|
|
net/ipv6/ip6mr.c:1656:14: warning: unused variable 'do_wrmifwhole'
Move it to the CONFIG_IPV6_PIMSM_V2 scope where its used.
Fixes: 4b340a5a726d ("net: ip6mr: add support for passing full packet on wrong mif")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-05
Maciej Fijalkowski says:
We were solving issues around AF_XDP busy poll's not-so-usual scenarios,
such as very big busy poll budgets applied to very small HW rings. This
set carries the things that were found during that work that apply to
net tree.
One thing that was fixed for all in-tree ZC drivers was missing on ice
side all the time - it's about syncing RCU before destroying XDP
resources. Next one fixes the bit that is checked in ice_xsk_wakeup and
third one avoids false setting of DD bits on Tx descriptors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Following the recommendation in Documentation/memory-barriers.txt for
virtual machine guests.
Fixes: 8b6a877c060ed ("Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels")
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20220328154457.100872-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This adds basic audio support for the Cirrus Logic CS35L45 amplifier.
The first two patches add two generic helpers to ASoC, and patch 3 is
a kunit test for patch 2.
|
|
Merge series from Heiner Kallweit <hkallweit1@gmail.com>:
On a S905W-based system I get the following error:
debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
Turned out that multiple components having the same name triggers this
error in soc_init_component_debugfs(). The proposed solution allows
other drivers to adopt the same approach with minimal effort.
With the patch the error is gone and that's the debugfs entries.
/sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller
|
|
Currently there are known potential issues for balloon and hot-add on
ARM64:
* Unballoon requests from Hyper-V should only unballoon ranges
that are guest page size aligned, otherwise guests cannot handle
because it's impossible to partially free a page. This is a
problem when guest page size > 4096 bytes.
* Memory hot-add requests from Hyper-V should provide the NUMA
node id of the added ranges or ARM64 should have a functional
memory_add_physaddr_to_nid(), otherwise the node id is missing
for add_memory().
These issues require discussions on design and implementation. In the
meanwhile, post_status() is working and essential to guest monitoring.
Therefore instead of disabling the entire hv_balloon driver, the
ballooning (when page size > 4096 bytes) and hot-add are disabled
accordingly for now. Once the issues are fixed, they can be re-enable in
these cases.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220325023212.1570049-3-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
DM_STATUS_REPORT expects the numbers of pages in the unit of 4k pages
(HV_HYP_PAGE) instead of guest pages, so to make it work when guest page
sizes are larger than 4k, convert the numbers of guest pages into the
numbers of HV_HYP_PAGEs.
Note that the numbers of guest pages are still used for tracing because
tracing is internal to the guest kernel.
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220325023212.1570049-2-boqun.feng@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
signal_pending() checks TIF_NOTIFY_SIGNAL and TIF_SIGPENDING, which
signal that the task should bail out of the syscall when possible. This
is a separate concept from need_resched(), which checks
TIF_NEED_RESCHED, signaling that the task should preempt.
In particular, with the current code, the signal_pending() bailout
probably won't work reliably.
Change this to look like other functions that read lots of data, such as
read_zero().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The fast key erasure RNG design relies on the key that's used to be used
and then discarded. We do this, making judicious use of
memzero_explicit(). However, reads to /dev/urandom and calls to
getrandom() involve a copy_to_user(), and userspace can use FUSE or
userfaultfd, or make a massive call, dynamically remap memory addresses
as it goes, and set the process priority to idle, in order to keep a
kernel stack alive indefinitely. By probing
/proc/sys/kernel/random/entropy_avail to learn when the crng key is
refreshed, a malicious userspace could mount this attack every 5 minutes
thereafter, breaking the crng's forward secrecy.
In order to fix this, we just overwrite the stack's key with the first
32 bytes of the "free" fast key erasure output. If we're returning <= 32
bytes to the user, then we can still return those bytes directly, so
that short reads don't become slower. And for long reads, the difference
is hopefully lost in the amortization, so it doesn't change much, with
that amortization helping variously for medium reads.
We don't need to do this for get_random_bytes() and the various
kernel-space callers, and later, if we ever switch to always batching,
this won't be necessary either, so there's no need to change the API of
these functions.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Fixes: c92e040d575a ("random: add backtracking protection to the CRNG")
Fixes: 186873c549df ("random: use simpler fast key erasure flow on per-cpu keys")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The driver doesn't support clause 45 register access yet, but doesn't
check if the access is a c45 one either. This leads to spurious register
reads and writes. Add the check.
Fixes: 542671fe4d86 ("net: phy: mscc-miim: Add MDIO driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andy Chiu says:
====================
Fix broken link on Xilinx's AXI Ethernet in SGMII mode
The Ethernet driver use phy-handle to reference the PCS/PMA PHY. This
could be a problem if one wants to configure an external PHY via phylink,
since it use the same phandle to get the PHY. To fix this, introduce a
dedicated pcs-handle to point to the PCS/PMA PHY and deprecate the use
of pointing it with phy-handle. A similar use case of pcs-handle can be
seen on dpaa2 as well.
--- patch v5 ---
- Re-apply the v4 patch on the net tree.
- Describe the pcs-handle DT binding at ethernet-controller level.
--- patch v6 ---
- Remove "preferrably" to clearify usage of pcs_handle.
--- patch v7 ---
- Rebase the patch on latest net/master
--- patch v8 ---
- Rebase the patch on net-next/master
- Add "reviewed-by" tag in PATCH 3/4: dt-bindings: net: add pcs-handle
attribute
- Remove "fix" tag in last commit message since this is not a critical
bug and will not be back ported to stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some SGMII use cases where both a fixed link external PHY and the
internal PCS/PMA PHY need to be configured, we should explicitly use a
phandle "pcs-phy" to get the reference to the PCS/PMA PHY. Otherwise, the
driver would use "phy-handle" in the DT as the reference to both the
external and the internal PCS/PMA PHY.
In other cases where the core is connected to a SFP cage, we could still
point phy-handle to the intenal PCS/PMA PHY, and let the driver connect
to the SFP module, if exist, via phylink.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document the new pcs-handle attribute to support connecting to an
external PHY. For Xilinx's AXI Ethernet, this is used when the core
operates in SGMII or 1000Base-X modes and links through the internal
PCS/PMA PHY.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the struct member `phy_node` of struct axienet_local is not used by the
driver anymore after initialization. It might be a remnent of old code
and could be removed.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The call to axienet_mdio_setup should not depend on whether "phy-node"
pressents on the DT. Besides, since `lp->phy_node` is used if PHY is in
SGMII or 100Base-X modes, move it into the if statement. And the next patch
will remove `lp->phy_node` from driver's private structure and do an
of_node_put on it right away after use since it is not used elsewhere.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some cases, xdp tx_queue can get used before initialization.
1. interface up/down
2. ring buffer size change
When CPU cores are lower than maximum number of channels of sfc driver,
it creates new channels only for XDP.
When an interface is up or ring buffer size is changed, all channels
are initialized.
But xdp channels are always initialized later.
So, the below scenario is possible.
Packets are received to rx queue of normal channels and it is acted
XDP_TX and tx_queue of xdp channels get used.
But these tx_queues are not initialized yet.
If so, TX DMA or queue error occurs.
In order to avoid this problem.
1. initializes xdp tx_queues earlier than other rx_queue in
efx_start_channels().
2. checks whether tx_queue is initialized or not in efx_xdp_tx_buffers().
Splat looks like:
sfc 0000:08:00.1 enp8s0f1np1: TX queue 10 spurious TX completion id 250
sfc 0000:08:00.1 enp8s0f1np1: resetting (RECOVER_OR_ALL)
sfc 0000:08:00.1 enp8s0f1np1: MC command 0x80 inlen 100 failed rc=-22
(raw=22) arg=789
sfc 0000:08:00.1 enp8s0f1np1: has been disabled
Fixes: f28100cb9c96 ("sfc: fix lack of XDP TX queues - error XDP TX failed (-22)")
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current code can lead to the following race:
CPU0 CPU1
rxrpc_exit_net()
rxrpc_peer_keepalive_worker()
if (rxnet->live)
rxnet->live = false;
del_timer_sync(&rxnet->peer_keepalive_timer);
timer_reduce(&rxnet->peer_keepalive_timer, jiffies + delay);
cancel_work_sync(&rxnet->peer_keepalive_work);
rxrpc_exit_net() exits while peer_keepalive_timer is still armed,
leading to use-after-free.
syzbot report was:
ODEBUG: free active (active state 0) object type: timer_list hint: rxrpc_peer_keepalive_timeout+0x0/0xb0
WARNING: CPU: 0 PID: 3660 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Modules linked in:
CPU: 0 PID: 3660 Comm: kworker/u4:6 Not tainted 5.17.0-syzkaller-13993-g88e6c0207623 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd 00 1c 26 8a 4c 89 ee 48 c7 c7 00 10 26 8a e8 b1 e7 28 05 <0f> 0b 83 05 15 eb c5 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3
RSP: 0018:ffffc9000353fb00 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: ffff888029196140 RSI: ffffffff815efad8 RDI: fffff520006a7f52
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815ea4ae R11: 0000000000000000 R12: ffffffff89ce23e0
R13: ffffffff8a2614e0 R14: ffffffff816628c0 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1f2908924 CR3: 0000000043720000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__debug_check_no_obj_freed lib/debugobjects.c:992 [inline]
debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1023
kfree+0xd6/0x310 mm/slab.c:3809
ops_free_list.part.0+0x119/0x370 net/core/net_namespace.c:176
ops_free_list net/core/net_namespace.c:174 [inline]
cleanup_net+0x591/0xb00 net/core/net_namespace.c:598
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
</TASK>
Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: linux-afs@lists.infradead.org
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While parsing user-provided actions, openvswitch module may dynamically
allocate memory and store pointers in the internal copy of the actions.
So this memory has to be freed while destroying the actions.
Currently there are only two such actions: ct() and set(). However,
there are many actions that can hold nested lists of actions and
ovs_nla_free_flow_actions() just jumps over them leaking the memory.
For example, removal of the flow with the following actions will lead
to a leak of the memory allocated by nf_ct_tmpl_alloc():
actions:clone(ct(commit),0)
Non-freed set() action may also leak the 'dst' structure for the
tunnel info including device references.
Under certain conditions with a high rate of flow rotation that may
cause significant memory leak problem (2MB per second in reporter's
case). The problem is also hard to mitigate, because the user doesn't
have direct control over the datapath flows generated by OVS.
Fix that by iterating over all the nested actions and freeing
everything that needs to be freed recursively.
New build time assertion should protect us from this problem if new
actions will be added in the future.
Unfortunately, openvswitch module doesn't use NLA_F_NESTED, so all
attributes has to be explicitly checked. sample() and clone() actions
are mixing extra attributes into the user-provided action list. That
prevents some code generalization too.
Fixes: 34ae932a4036 ("openvswitch: Make tunnel set action attach a metadata dst")
Link: https://mail.openvswitch.org/pipermail/ovs-dev/2022-March/392922.html
Reported-by: Stéphane Graber <stgraber@ubuntu.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tlb_remove_huge_tlb_entry only considers PMD_SIZE and PUD_SIZE when
updating the mmu_gather structure.
Unfortunately on arm64 there are two additional huge page sizes that
need to be covered: CONT_PTE_SIZE and CONT_PMD_SIZE. Where an end-user
attempts to employ contiguous huge pages, a VM_BUG_ON can be experienced
due to the fact that the tlb structure hasn't been correctly updated by
the relevant tlb_flush_p.._range() call from tlb_remove_huge_tlb_entry.
This patch adds inequality logic to the generic implementation of
tlb_remove_huge_tlb_entry s.t. CONT_PTE_SIZE and CONT_PMD_SIZE are
effectively covered on arm64. Also, as well as ptes, pmds and puds;
p4ds are now considered too.
Reported-by: David Hildenbrand <david@redhat.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/linux-mm/811c5c8e-b3a2-85d2-049c-717f17c3a03a@redhat.com/
Signed-off-by: Steve Capper <steve.capper@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220330112543.863-1-steve.capper@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The alternatives code must be `noinstr` such that it does not patch itself,
as the cache invalidation is only performed after all the alternatives have
been applied.
Mark patch_alternative() as `noinstr`. Mark branch_insn_requires_update()
and get_alt_insn() with `__always_inline` since they are both only called
through patch_alternative().
Booting a kernel in QEMU TCG with KCSAN=y and ARM64_USE_LSE_ATOMICS=y caused
a boot hang:
[ 0.241121] CPU: All CPU(s) started at EL2
The alternatives code was patching the atomics in __tsan_read4() from LL/SC
atomics to LSE atomics.
The following fragment is using LL/SC atomics in the .text section:
| <__tsan_unaligned_read4+304>: ldxr x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This LL/SC atomic sequence was to be replaced with LSE atomics. However since
the alternatives code was instrumentable, __tsan_read4() was being called after
only the first instruction was replaced, which led to the following code in memory:
| <__tsan_unaligned_read4+304>: ldadd x5, x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This caused an infinite loop as the `stxr` instruction never completed successfully,
so `w7` was always 0.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220405104733.11476-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
CONFIG_SATA_LPM_MOBILE_POLICY was renamed to CONFIG_SATA_LPM_POLICY in
commit 4dd4d3deb502 ("ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY
configuration item").
This can potentially cause problems as users would invisibly lose
configuration policy defaults when they built the new kernel. To
avoid such problems, switch back to the old name (even if it's wrong).
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
There is often not a MAC address available in an EEPROM accessible by
Linux with Marvell devices. Instead the bootload has the MAC address
and directly programs it into the hardware. So don't consider an error
from of_get_mac_address() has fatal. However, the check was added for
the case where there is a MAC address in an the EEPROM, but the EEPROM
has not probed yet, and -EPROBE_DEFER is returned. In that case the
error should be returned. So make the check specific to this error
code.
Cc: Mauri Sandberg <maukka@ext.kapsi.fi>
Reported-by: Thomas Walther <walther-it@gmx.de>
Fixes: 42404d8f1c01 ("net: mv643xx_eth: process retval from of_get_mac_address")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220405000404.3374734-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'OVS_CLONE_ATTR_EXEC' is an internal attribute that is used for
performance optimization inside the kernel. It's added by the kernel
while parsing user-provided actions and should not be sent during the
flow dump as it's not part of the uAPI.
The issue doesn't cause any significant problems to the ovs-vswitchd
process, because reported actions are not really used in the
application lifecycle and only supposed to be shown to a human via
ovs-dpctl flow dump. However, the action list is still incorrect
and causes the following error if the user wants to look at the
datapath flows:
# ovs-dpctl add-dp system@ovs-system
# ovs-dpctl add-flow "<flow match>" "clone(ct(commit),0)"
# ovs-dpctl dump-flows
<flow match>, packets:0, bytes:0, used:never,
actions:clone(bad length 4, expected -1 for: action0(01 00 00 00),
ct(commit),0)
With the fix:
# ovs-dpctl dump-flows
<flow match>, packets:0, bytes:0, used:never,
actions:clone(ct(commit),0)
Additionally fixed an incorrect attribute name in the comment.
Fixes: b233504033db ("openvswitch: kernel datapath clone action")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20220404104150.2865736-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KS8851 selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL, so
make KS8851 also depend on PTP_1588_CLOCK_OPTIONAL.
Fixes kconfig warning and build errors:
WARNING: unmet direct dependencies detected for MICREL_PHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- KS8851 [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && SPI [=y]
ld.lld: error: undefined symbol: ptp_clock_register referenced by micrel.c
net/phy/micrel.o:(lan8814_probe) in archive drivers/built-in.a
ld.lld: error: undefined symbol: ptp_clock_index referenced by micrel.c
net/phy/micrel.o:(lan8814_ts_info) in archive drivers/built-in.a
Reported-by: kernel test robot <lkp@intel.com>
Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220405065936.4105272-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Incorrect comparison in bitmask .reduce, from Jeremy Sowden.
2) Missing GFP_KERNEL_ACCOUNT for dynamically allocated objects,
from Vasily Averin.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: memcg accounting for dynamically allocated objects
netfilter: bitwise: fix reduce comparisons
====================
Link: https://lore.kernel.org/r/20220405100923.7231-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On a S905W-based system I get the following error:
debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
Turned out that multiple components having the same name triggers this
error in soc_init_component_debugfs(). With the patch the error is gone
and that's the debugfs entries.
/sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/38053baf-c33b-7fdf-7593-99b22153a9c0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Allow the component debugfs_prefix to be set from
snd_soc_component_driver. First use case is avoiding a duplicate
debugfs entry error in case a device has multiple components
which have the same name therefore.
Note that we don't set component->debugfs_prefix if it's set already.
That's needed because partially component->debugfs_prefix is set
before calling snd_soc_component_initialize().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/d18bff6a-1df1-5f95-0cf8-10dbaa62d7be@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sc7280 platform
Update required clock-names used for MI2S primary path, VA macro's
codec memory path and HDMI path in sc7280 based platforms.
Update power domain names required for sc7280 platforms.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1647852981-27895-4-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add vdd mic bias supply, which is required to provide bias
for wcd938x codec.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1647852981-27895-3-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update dt-bindings for clocks as per ADSP bypass solutions, in which macro
dcodec GDSCs are enabled using power domains in lpass digital codec drivers.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1647852981-27895-2-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
AK4613 has STEREO/TDM512/TDM256/TDM128 mode.
Renesas is the only user of ak4613 on upstream for now,
and is using it as STEREO mode, because of board connection.
Thus, current driver is supporting STEREO mode only, and other
modes are not supported.
But I noticed that I can try first 2ch out of TDM256 mode 8ch
Playback even in such a situation.
But because of board connection, I can't test full TDM256 mode,
and/or other TDM mode. Thus I don't want to add new DT propaty for now.
This patch enables TDM256 mode test by "ifdef style",
but it has no effect to current supported STEREO mode.
You can define AK4613_ENABLE_TDM_TEST to try TDM256 mode.
Please don't hesitate to break current code if you can add full TDM256
and/or other TDM mode. You don't need to care compatibility with Renesas.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rskp9l0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
TDM support needs to use constraint_channels.
This patch renames current constraint to constraint_rates for it.
This is prepare for TDM support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6d0p9l7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current priv is using ->iface, but it is not good match
to support TDM. This patch adds ->ctrl1 instead of it.
This is prepare for TDM support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkxgp9lh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Renesas is only user of ak4613 on upstream, and it is tested
only under "clock consumer" because of board mounting situation.
Thus, "clock provider" is not supperted/tested.
This patch return error if it was setup as clock provider.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czhwp9lq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ak4613 driver is assuming symmetric format.
Thus, we don't need to have asymmetric table for judging the
iface at .hw_param.
This patch cleanup ak4613_interface for it.
This is prepare for TDM support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ee2cp9lz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need to use mutex_lock() for priv->cnt / priv->iface,
but we are missing it at ak4613_dai_startup().
This patch adds missing mutex_lock() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fsmsp9m7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace the last instance of acpi_bus_get_device(), added recently
by commit 87e59b36e5e2 ("spi: Support selection of the index of the
ACPI Spi Resource before alloc"), with acpi_fetch_acpi_dev() and
finally drop acpi_bus_get_device() that has no more users.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"Fixes and cleanups:
- A couple of mlx5 fixes related to cvq
- A couple of reverts dropping useless code (code that used it got
reverted earlier)"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa: mlx5: synchronize driver status with CVQ
vdpa: mlx5: prevent cvq work from hogging CPU
Revert "virtio_config: introduce a new .enable_cbs method"
Revert "virtio: use virtio_device_ready() in virtio_device_restore()"
|
|
The CS35L45 is a 15 V Boosted Mono Class D Amplifier with DSP
Speaker Protection and Adaptive Battery Management.
This initial driver provides standard non-boosted audio operation
without the DSP.
Signed-off-by: James Schulman <james.schulman@cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405135419.1230088-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds the schema binding for the Cirrus Logic CS35L45 Smart Amp
and associated header file.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220405135419.1230088-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Create a new kunit test for soc-utils and use it to test
snd_soc_tdm_params_to_bclk().
The test uses a table of values to avoid the possibility that an
on-the-fly generator contains the same algorithmic error as the
function-under-test and so fails to detect a bug.
There is no need to test every possible combination of values.
Enough test cases are included to give confidence that the function
is producing the correct results.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405135419.1230088-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a helper function snd_soc_tdm_params_to_bclk() to calculate
the bclk from params info and the tdm sots configuration.
When using a TDM frame of N slots of width W bits:
bclk = sample_rate * N * W
As a convenience to simplify calling code, if the slot count or
slot width are 0 a value will be obtained from the params. This
allows calling code to use this one function to handle cases of
TDM where only one parameter is fixed, or I2S where the slot width
is fixed (for example to set a 32-bit slot for 24-bit samples).
Also as a convenience the slot count can optionally be rounded up
to a multiple. This is mainly useful for I2S systems, since I2S has
two phases of LRCLK the number of slots is always a multiple of 2.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405135419.1230088-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a convenience macro for defining a single (mono) TLV control
with a signed value. This can already be done by using
SOC_DOUBLE_R_S_TLV() with the same address for left and right
registers, but a dedicated macro is more readable.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405135419.1230088-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After resuming from suspend-to-RAM, the MSRs that control CPU's
speculative execution behavior are not being restored on the boot CPU.
These MSRs are used to mitigate speculative execution vulnerabilities.
Not restoring them correctly may leave the CPU vulnerable. Secondary
CPU's MSRs are correctly being restored at S3 resume by
identify_secondary_cpu().
During S3 resume, restore these MSRs for boot CPU when restoring its
processor state.
Fixes: 772439717dbf ("x86/bugs/intel: Set proper CPU features and setup RDS")
Reported-by: Neelima Krishnan <neelima.krishnan@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The mechanism to save/restore MSRs during S3 suspend/resume checks for
the MSR validity during suspend, and only restores the MSR if its a
valid MSR. This is not optimal, as an invalid MSR will unnecessarily
throw an exception for every suspend cycle. The more invalid MSRs,
higher the impact will be.
Check and save the MSR validity at setup. This ensures that only valid
MSRs that are guaranteed to not throw an exception will be attempted
during suspend.
Fixes: 7a9c2dd08ead ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
AR context
In 1394 OHCI specification, descriptor of Asynchronous Receive DMA context
has timeStamp field in its trailer quadlet. The field is written by
the host controller for the time to receive asynchronous request
subaction in isochronous cycle time.
In Linux FireWire subsystem, the value of field is stored to fw_packet
structure and copied to fw_request structure as the part. The fw_request
structure is hidden from unit driver and passed as opaque pointer when
calling registered handler. It's inconvenient to the unit driver which
needs timestamp of packet.
This commit adds kernel API to pick up timestamp from opaque pointer to
fw_request structure.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220405072221.226217-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
1394 OHCI specification defined Isochronous Cycle Timer Register to get
value of CYCLE_TIME register defined by IEEE 1394 for CSR architecture
defined by ISO/IEC 13213. Unit driver can calculate packet time by
compute with the value of CYCLE_TIME and timeStamp field in descriptor
of each isochronous and asynchronous context. The resolution of CYCLE_TIME
is 49.576 MHz, while the one of timeStamp is 8,000 Hz.
Current implementation of Linux FireWire subsystem allows the driver to
get the value of CYCLE_TIMER CSR register by transaction service. The
transaction service has overhead in regard of access to MMIO register.
This commit adds kernel API for unit driver to access the register
directly.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220405072221.226217-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
(Hector Martin wrote)
This fixes segfaults when a card gets yanked off of the PCIe bus while
busy, e.g. with a userspace app trying to get the cycle time:
[8638860.994310] Call Trace:
[8638860.994313] ioctl_get_cycle_timer2+0x4f/0xd0 [firewire_core]
[8638860.994323] fw_device_op_ioctl+0xae/0x150 [firewire_core]
[8638860.994328] __x64_sys_ioctl+0x7d/0xb0
[8638860.994332] do_syscall_64+0x45/0x80
[8638860.994337] entry_SYSCALL_64_after_hwframe+0x44/0xae
(Takashi Sakamoto wrote)
As long as reading commit 20802224298c ("firewire: core: add forgotten
dummy driver methods, remove unused ones"), three functions are not
implemeted in dummy driver for reason; .read_csr, .write_csr, and
.set_config_rom.
In core of Linux FireWire subsystem, the callback of .set_config_rom is
under acquisition of mutual exclusive for local list of card. The
acquision is also done in process for removal of card, therefore it's
safe for missing implementation of .set_config_rom.
On the other hand, no lock primitive accompanies any call of .read_csr and
.write_csr. For userspace client, check of node shutdown is done in the
beginning of dispatch of ioctl request, while node shifts to shutdown
state in workqueue context enough after card shifts to dummy driver. It's
probable that these two functions are called for the dummy driver by the
code of userspace client. In-kernel unit driver has similar situation.
It's better to add implementation of the two functions for dummy driver.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220405072221.226217-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix:
sound/usb/midi.c: In function ‘snd_usbmidi_out_endpoint_create’:
sound/usb/midi.c:1389:2: error: case label does not reduce to an integer constant
case USB_ID(0xfc08, 0x0101): /* Unknown vendor Cable */
^~~~
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
[ A slight correction with parentheses around the argument by tiwai ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220405151517.29753-3-bp@alien8.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The variable i is being assigned a value that is never read, it
is being re-assigned in the following for-loop. The assignment is
redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220405135412.199251-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
