summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-06drivers: clk: st: Fix FSYN channel valuesGabriel Fernandez
This patch fixes the value for disabling the FSYN channel clock. The 'is_enabled' returned value is also fixed. Signed-off-by: Pankaj Dev <pankaj.dev@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06drivers: clk: st: Remove unused codeGabriel Fernandez
Remove this duplicated code due to a bad copy / paste. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06clk: qcom: Use parent rate when set rate to pixel RCG clockHai Li
Since the parent rate has been recalculated, pixel RCG clock should rely on it to find the correct M/N values during set_rate, instead of calling __clk_round_rate() to its parent again. Signed-off-by: Hai Li <hali@codeaurora.org> Tested-by: Archit Taneja <architt@codeaurora.org> Fixes: 99cbd064b059 ("clk: qcom: Support display RCG clocks") [sboyd@codeaurora.org: Silenced unused parent variable warning] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06intel_pmc_ipc: Fix compiler casting warningsqipeng.zha
Avoid casting variables to different sizes due to different compilers and settings. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: qipeng.zha <qipeng.zha@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-07-06usb: gadget: f_midi: fix error recovery pathAndrzej Pietrasiewicz
In case kstrdup() fails the resources to release are midi->in_port[] and midi. No cards have been registered, so no need to unregister any. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: phy: mxs: suspend to RAM causes NULL pointer dereferenceStefan Wahren
Triggering suspend to RAM via sysfs on a i.MX28 causes a NULL pointer dereference. This patch avoids the oops in mxs_phy_get_vbus_status() by aborting since there is no syscon available. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: efdbd3a5d6e ("usb: phy: mxs: do not set PWD.RXPWD1PT1 for low speed connection") CC: <stable@vger.kernel.org> # 4.0 Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: gadget: udc: fix free_irq() after request_irq() failedTakeshi Yoshimura
My static checker detected the mistake. I fix this by changing "goto err_irq" to "goto err_req". The label err_irq is not used now so this patch also removes it. Signed-off-by: Takeshi Yoshimura <yos@sslab.ics.keio.ac.jp> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: gadget: composite: Fix NULL pointer dereferenceKishon Vijay Abraham I
commit f563d230903210acc ("usb: gadget: composite: add req_match method to usb_function") accesses cdev->config even before set config is invoked causing a NULL pointer dereferencing error while running Lecroy Mass Storage Compliance test. Fix it here by accessing cdev->config only if it is non NULL. Fixes: commit f563d230903210acc ("usb: gadget: composite: add req_match method to usb_function"). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: gadget: f_fs: do not set cancel function on synchronous {read,write}Rui Miguel Silva
do not try to set cancel function in synchronous operations in ffs_epfile_{read,write}_iter. Cc: <stable@vger.kernel.org> # v4.0+ Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: f_mass_storage: limit number of reported LUNsMichal Nazarewicz
Mass storage function created via configfs always reports eight LUNs to the hosts even if only one LUN has been configured. Adjust the number when the USB function is allocated based on LUNs that user has created. Cc: <stable@vger.kernel.org> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: dwc3: core: avoid NULL pointer dereferenceFelipe Balbi
commit 3e10a2ce98d1 ("usb: dwc3: add hsphy_interface property") introduced a possible NULL pointer dereference because dwc->hsphy_interface can be NULL. In order to fix it, all we have to do is guard strncmp() against a NULL argument. Fixes: 3e10a2ce98d1 ("usb: dwc3: add hsphy_interface property") Tested-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: dwc2: embed storage for reg backup in struct dwc2_hsotgMian Yousaf Kaukab
Register backup function can be called from atomic context. Instead of using atomic memory pool, embed backup storage space in struct dwc2_hsotg. Also add a valid flag in each struct as NULL pointer can't be used as the content validity check any more. Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: dwc2: host: allocate qtd before atomic enqueueMian Yousaf Kaukab
To avoid sleep while atomic bugs, allocate qtd before calling dwc2_hcd_urb_enqueue. No need to pass mem_flags to dwc2_hcd_urb_enqueue any more as no memory allocations are done in it. Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: dwc2: host: allocate qh before atomic enqueueMian Yousaf Kaukab
To avoid sleep while atomic bugs, allocate qh before calling dwc2_hcd_urb_enqueue. qh pointer can be used directly now instead of passing ep->hcpriv as double pointer. Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06usb: musb: host: rely on port_mode to call musb_start()Felipe Balbi
Currently, we're calling musb_start() twice for DRD ports in some situations. This has been observed to cause enumeration issues after suspend/resume cycles with AM335x. In order to fix the problem, we just have to fix the check on musb_has_gadget() so that it only returns true if current mode is Host and ignore the fact that we have or not a gadget driver loaded. Fixes: ae44df2e21b5 (usb: musb: call musb_start() only once in OTG mode) Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: <stable@vger.kernel.org> # v3.11+ Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-07-06staging: make board support depend on OF_IRQ and CLKDEV_LOOKUPPaul Gortmaker
Building allmodconfig for arch/cris currently fails with: drivers/built-in.o: In function `board_staging_register_clock': drivers/staging/board/board.c:131: undefined reference to `clk_add_alias' make: *** [vmlinux] Error 1 The clk_add_alias lives in drivers/clk/clkdev.c and that file is only compiled for CONFIG_CLKDEV_LOOKUP, so it would seem we need to add a dependency on that. Geert also reported seeing this in his build coverage: There seems to be another missing dependency on OF_IRQ: drivers/built-in.o: In function `board_staging_gic_fixup_resources': (.init.text+0x21c2): undefined reference to `irq_create_of_mapping' so we might as well fix that at the same time since it is on the same line. Cc: Magnus Damm <damm+renesas@opensource.se> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-06arm64: defconfig: Add Ceva ahci to the defconfigSuneel Garapati
The Ceva ahci controller is available on the Xilinx Zynq UltraScale+ MPSoC. Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [catalin.marinas@arm.com: removed unnecessary defconfig changes] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-07-06arm64: remove another unnecessary libfdt include pathArd Biesheuvel
Patch 63a4aea55670 ("of: clean-up unnecessary libfdt include paths") removed all explicit libfdt include paths, since those are no longer necessary after the latest dtc upgrade. However, this one snuck in during the same merge window. Remove it. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-07-06Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Take tracefs into account when reporting errors about accessing tracepoint information in tools like 'perf trace' (Arnaldo Carvalho de Melo) - Let user have timestamps with per-thread recording in 'perf record' (Adrian Hunter) Infrastructure changes: - Introduce series of functions to build event filters so that we can set them in just one ioctl call, useful to set up common_pid, raw_syscalls:sys_{enter,exit}'s "id" filters to use with 'perf trace' (Arnaldo Carvalho de Melo) - Delete an unnecessary check before calling strfilter__delete() (Markus Elfring) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/earlyprintk: Allow early_printk() to use console style parameters like ↵Steven Rostedt
'115200n8' When I enable early_printk on a kernel, I cut and paste the console= input and add to earlyprintk parameter. But I notice recently that ktest has not been detecting triple faults. The way it detects it, is by seeing the kernel banner "Linux version .." with a different kernel version pop up. Then I noticed that early printk was no longer working on my console, which was why ktest was not seeing it. I bisected it down and it was added to 4.0 with this commit: ea9e9d802902 ("Specify PCI based UART for earlyprintk") because it converted the simple_strtoul() that converts the baud number into a kstrtoul(). The problem with this is, I had as my baud rate, 115200n8 (acceptable for console=ttyS0), but because of the "n8", the kstrtoul() doesn't parse the baud rate and returns an error, which sets the baud rate to the default 9600. This explains the garbage on my screen. Now, earlyprintk= kernel parameter does not say it accepts that format. Thus, one answer would simply be me changing my kernel parameters to remove the "n8" since it isn't parsed anyway. But I wonder if other people run into this, and it seems strange that the two consoles for serial accepts different input. I could also extend this to have earlyprintk do something with that "n8" or whatever it has and have it match the console parsing (which, BTW, still uses simple_strtoul(), as I guess it has to). This patch just makes my old kernel parameter parsing work like it use to. Although, simple_strtoull() is considered obsolete, it is the only standard string parsing function that parses a number that is attached to text. Ironically, commit ea9e9d802902 also added several calls to simple_strtoul()! Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Alan Cox <alan@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stuart R. Anderson <stuart.r.anderson@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150706101434.5f6a351b@gandalf.local.home [ Cleaned it up a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06tools lib api debugfs: Check for tracefs when reporting errorsArnaldo Carvalho de Melo
Now that we have two mountpoints, one for debugfs and another, for tracefs, we end up needing to check permissions for both, so, on a system with default config we were always asking the user to check the permission of the debugfs mountpoint, even when it was already sufficient. Fix it. E.g.: $ trace -e nanosleep usleep 1 Error: No permissions to read /sys/kernel/debug/tracing/events/raw_syscalls/sys_(enter|exit) Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug' $ sudo mount -o remount,mode=755 /sys/kernel/debug $ trace -e nanosleep usleep 1 Error: No permissions to read /sys/kernel/debug/tracing/events/raw_syscalls/sys_(enter|exit) Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing' $ sudo mount -o remount,mode=755 /sys/kernel/debug/tracing $ trace -e nanosleep usleep 1 0.326 ( 0.061 ms): usleep/11961 nanosleep(rqtp: 0x7ffef1081c50) = 0 $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-0viljeuhc7q84ic8kobsna43@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-06dm btree: silence lockdep lock inversion in dm_btree_del()Joe Thornber
Allocate memory using GFP_NOIO when deleting a btree. dm_btree_del() can be called via an ioctl and we don't want to recurse into the FS or block layer. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-07-06x86/espfix: Init espfix on the boot CPU sideZhu Guihua
As we alloc pages with GFP_KERNEL in init_espfix_ap() which is called before we enable local irqs, so the lockdep sub-system would (correctly) trigger a warning about the potentially blocking API. So we allocate them on the boot CPU side when the secondary CPU is brought up by the boot CPU, and hand them over to the secondary CPU. And we use alloc_pages_node() with the secondary CPU's node, to make sure the espfix stack is NUMA-local to the CPU that is going to use it. Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Cc: <bp@alien8.de> Cc: <luto@amacapital.net> Cc: <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/c97add2670e9abebb90095369f0cfc172373ac94.1435824469.git.zhugh.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/espfix: Add 'cpu' parameter to init_espfix_ap()Zhu Guihua
Add a CPU index parameter to init_espfix_ap(), so that the parameter could be propagated to the function for espfix page allocation. Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Cc: <bp@alien8.de> Cc: <luto@amacapital.net> Cc: <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/cde3fcf1b3211f3f03feb1a995bce3fee850f0fc.1435824469.git.zhugh.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/kasan: Move KASAN_SHADOW_OFFSET to the arch KconfigAndrey Ryabinin
KASAN_SHADOW_OFFSET is purely arch specific setting, so it should be in arch's Kconfig file. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-7-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/kasan: Add message about KASAN being initializedAndrey Ryabinin
Print informational message to tell user that kernel runs with KASAN enabled. Add a "kasan: " prefix to all messages in kasan_init_64.c. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-6-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/kasan: Fix boot crash on AMD processorsAndrey Ryabinin
While populating zero shadow wrong bits in upper level page tables used. __PAGE_KERNEL_RO that was used for pgd/pud/pmd has _PAGE_BIT_GLOBAL set. Global bit is present only in the lowest level of the page translation hierarchy (ptes), and it should be zero in upper levels. This bug seems doesn't cause any troubles on Intel cpus, while on AMDs it cause kernel crash on boot. Use _KERNPG_TABLE bits for pgds/puds/pmds to fix this. Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-5-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/kasan: Flush TLBs after switching CR3Andrey Ryabinin
load_cr3() doesn't cause tlb_flush if PGE enabled. This may cause tons of false positive reports spamming the kernel to death. To fix this __flush_tlb_all() should be called explicitly after CR3 changed. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-4-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/kasan: Fix KASAN shadow region page tablesAlexander Popov
Currently KASAN shadow region page tables created without respect of physical offset (phys_base). This causes kernel halt when phys_base is not zero. So let's initialize KASAN shadow region page tables in kasan_early_init() using __pa_nodebug() which considers phys_base. This patch also separates x86_64_start_kernel() from KASAN low level details by moving kasan_map_early_shadow(init_level4_pgt) into kasan_early_init(). Remove the comment before clear_bss() which stopped bringing much profit to the code readability. Otherwise describing all the new order dependencies would be too verbose. Signed-off-by: Alexander Popov <alpopov@ptsecurity.com> Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-3-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/init: Clear 'init_level4_pgt' earlierAndrey Ryabinin
Currently x86_64_start_kernel() has two KASAN related function calls. The first call maps shadow to early_level4_pgt, the second maps shadow to init_level4_pgt. If we move clear_page(init_level4_pgt) earlier, we could hide KASAN low level detail from generic x86_64 initialization code. The next patch will do it. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-2-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06Merge branch 'fixes-rc1' into omap-for-v4.2/fixesTony Lindgren
2015-07-06ARM: dts: am4372.dtsi: disable rfbiTomi Valkeinen
When DSS nodes were added to am4372.dtsi, the rfbi node was not marked as disabled. This should have been done, as the rule of thumb is to disable all DSS nodes that are not used, and especially rfbi, as we don't have a driver for rfbi. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-06ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2Roger Quadros
Without this USB2 breaks if USB1 is disabled or USB1 initializes after USB2 e.g. due to deferred probing. Fixes: 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15") Signed-off-by: Roger Quadros <rogerq@ti.com> Cc: stable@vger.kernel.org (v3.19+) Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-06sched/fair: Test list head instead of list entry in throttle_cfs_rq()Cong Wang
According to the comments, we need to test if this is the first throttled task, however, list_empty() tests on the entry cfs_rq->throttled_list, not the head, this is wrong. This is a bug because we don't re-init the list entry after removing it from the list, so list_empty() could return false even if the list is really empty. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435174907-432-1-git-send-email-xiyou.wangcong@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06ARM: dts: am4372: Add emif nodeDave Gerlach
Add node for TI AM4372 EMIF. Without this we get a warning with the recent commit fabbe6df (ARM: OMAP: AM43xx hwmod: Add data for am43xx emif hwmod). Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-06Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep"Johan Hovold
This reverts commit 3d76be5b933e2a66d85a2f7444e68e99e8a48ad4. The latest revision of Beaglebone Black does not support RTC-only mode. To avoid potential hardware damage, RTC-only mode was disabled by default by commit 7a6cb0abe1aa ("ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage"). Unfortunately, an incorrect fix had already been applied, which instead of just disabling RTC-only mode, prevents the Beaglebone from powering down at all. Revert this patch to fix the power-off regression. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-06perf/x86: Fix copy_from_user_nmi() return if range is not okYann Droneaud
Commit 0a196848ca36 ("perf: Fix arch_perf_out_copy_user default"), changes copy_from_user_nmi() to return the number of remaining bytes so that it behave like copy_from_user(). Unfortunately, when the range is outside of the process memory, the return value is still the number of byte copied, eg. 0, instead of the remaining bytes. As all users of copy_from_user_nmi() were modified as part of commit 0a196848ca36, the function should be fixed to return the total number of bytes if range is not correct. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435001923-30986-1-git-send-email-ydroneaud@opteya.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06perf: Fix AUX buffer refcountingPeter Zijlstra
Its currently possible to drop the last refcount to the aux buffer from NMI context, which results in the expected fireworks. The refcounting needs a bigger overhaul, but to cure the immediate problem, delay the freeing by using an irq_work. Reviewed-and-tested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150618103249.GK19282@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06perf record: Let user have timestamps with per-thread recordingAdrian Hunter
If the option -T is used with option --per-thread, then time is still not sampled. Fix that by using OPT_BOOLEAN_SET to distinguish when the user used the -T option as opposed to the default case when timestamps are enabled but only for per-cpu recording. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1436183461-1918-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-06perf probe: Delete an unnecessary check before the function call ↵Markus Elfring
"strfilter__delete" The strfilter__delete() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-janitors@vger.kernel.org Link: http://lkml.kernel.org/r/5597751A.5000506@users.sourceforge.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-06perf trace: Use event filters for the event qualifier listArnaldo Carvalho de Melo
We use raw_syscalls:sys_{enter,exit} events to show the syscalls, but were using a rather lazy/inneficient way to implement our 'strace -e' equivalent: filter out after reading the events in the ring buffer. Deflect more work to the kernel by appending a filter expression for that, that, together with the pid list, that is always present, if only to filter the tracer itself, reduces pressure on the ring buffer and otherwise use infrastructure already in place in the kernel to do early filtering. If we use it with -v we can see the filter passed to the kernel, for instance, for this contrieved case: # trace -v -e \!open,close,write,poll,recvfrom,select,recvmsg,writev,sendmsg,read,futex,epoll_wait,ioctl,eventfd --filter-pids 2189,2566,1398,2692,4475,4532 <SNIP> (common_pid != 2514 && common_pid != 1398 && common_pid != 2189 && common_pid != 2566 && common_pid != 2692 && common_pid != 4475 && common_pid != 4532) && (id != 3 && id != 232 && id != 284 && id != 202 && id != 16 && id != 2 && id != 7 && id != 0 && id != 45 && id != 47 && id != 23 && id != 46 && id != 1 && id != 20) 0.011 (0.011 ms): caribou/2295 eventfd2(flags: CLOEXEC|NONBLOCK) = 18 16.946 (0.019 ms): caribou/2295 eventfd2(flags: CLOEXEC|NONBLOCK) = 18 38.598 (0.167 ms): chronyd/794 socket(family: INET, type: DGRAM ) = 4 38.603 (0.002 ms): chronyd/794 fcntl(fd: 4<socket:[239307]>, cmd: GETFD) = 0 38.605 (0.001 ms): chronyd/794 fcntl(fd: 4<socket:[239307]>, cmd: SETFD, arg: 1) = 0 ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ti2tg18atproqpguc2moinp6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-06perf evsel: Introduce append_filter() methodArnaldo Carvalho de Melo
To allow building filters in evsel->filter, that will eventually be applied via perf_evsel__apply_filter(). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-sjfoes3pycx7nlpmgedca13v@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-06perf evlist: Make perf_evlist__set_filter use perf_evsel__set_filterArnaldo Carvalho de Melo
Instead of calling perf_evsel__apply_filter straight away, so that we can, in the next patches, expand the filter with more conditions before actually calling the ioctl to pass the end result filter to the kernel. Now we need to call perf_evlist__apply_filters() after the filter is completely setup, i.e. do the ioctl calls. The perf_evlist__apply_filters() method was already in place, because that is the model for the other tools that receives filters in the command line: go on setting then in the evsel->filter and only at the end, after parsing the whole command line, apply them. We get, as a bonus, a more expressive message that states which event, if any, failed to have the filter applied to, with an error message stating what happened. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-f429pgz75ryz7tpe6v74etre@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-06perf evsel: Introduce set_filter methodArnaldo Carvalho de Melo
Replaces existing filter string with the one provided. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-jst49z83li0yx3g18o54u51a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-06perf evsel: Rename set_filter to apply_filterArnaldo Carvalho de Melo
We need to be able to go on constructing a complex filter in multiple stages, since we can only set one filter per event. For instance, we need to be able, in 'perf trace' to filter by the 'common_pid' field all the time, if only for the tracer itself, to avoid a feedback loop, and, in addition, we may want to filter the raw_syscalls:sys_{enter,exit} events by its 'id' filter, when using 'perf trace -e open,close' or 'perf trace -e !open,close', i.e. when we are interested in just a subset of syscalls or when we are not interested in it. So we will have: perf_evsel__set_filter(evsel, char *filter) Replaces whatever is in evsel->filter. perf_evsel__append_filter(evsel, const char *op, char *filter) Appends, using op ("&&" or "||") with what is in evsel->filter. perf_evsel__apply_filter(evsel, filter): That actually applies a filter, be it the one being constructed in evsel->filter, or any other, for tools with more specific ways to build the filter, issuing the appropriate ioctl for all the evsel fds. The same changes will be made to the evlist__{set,apply} variants to keep everything consistent. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-2s5z9xtpnc2lwio3cv5x0jek@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-06perf trace: Store the syscall ids for the event qualifiers in a tableArnaldo Carvalho de Melo
That we will use to set a filter on raw_syscalls:sys_{enter,exit} events. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-2acxrcxyu7tlolrfilpty38y@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-06perf trace: Remember what are the syscalls tracepoint evselsArnaldo Carvalho de Melo
We will need to set filters on then. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-u8hpgjpf3w8o1prnnjnwegwf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-06perf tools: Asprintf like functions to format integer filter expressionArnaldo Carvalho de Melo
char *asprintf_expr_in_ints(const char *var, size_t nints, int *ints); char *asprintf_expr_not_in_ints(const char *var, size_t nints, int *ints); Example of output formatted with those functions: # ./tp_filter 6 12 2015 asprintf_expr_in_ints: id == 6 || id == 12 || id == 2015 asprintf_expr_not_in_ints: id != 6 && id != 12 && id != 2015 # It'll be used with, for instance, perf_evsel__set_filter_in_ints(), that will be used in turn to ask the kernel to filter out all raw_syscalls:* except for the ones specified by the user via: $ perf trace -e some,list,of,syscalls Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-jt07vfp6bd8y50c05j1t7hrn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-06USB: cp210x: add ID for Aruba Networks controllersPeter Sanford
Add the USB serial console device ID for Aruba Networks 7xxx series controllers which have a USB port for their serial console. Signed-off-by: Peter Sanford <peter@sanford.io> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-07-06powerpc/powernv: Fix opal-elog interrupt handlerAlistair Popple
The conversion of opal events to a proper irqchip means that handlers are called until the relevant opal event has been cleared by processing it. Events that queue work should therefore use a threaded handler to mask the event until processing is complete. Signed-off-by: Alistair Popple <alistair@popple.id.au> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-16 03:11:56 +0000