summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-03drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDTJames Morse
The cacheinfo structures are alloced/freed by cpu online/offline callbacks. Originally these were only used by sysfs to expose the cache topology to user space. Without any in-kernel dependencies CPUHP_AP_ONLINE_DYN was an appropriate choice. resctrl has started using these structures to identify CPUs that share a cache. It updates its 'domain' structures from cpu online/offline callbacks. These depend on the cacheinfo structures (resctrl_online_cpu()->domain_add_cpu()->get_cache_id()-> get_cpu_cacheinfo()). These also run as CPUHP_AP_ONLINE_DYN. Now that there is an in-kernel dependency, move the cacheinfo work earlier so we know its done before resctrl's CPUHP_AP_ONLINE_DYN work runs. Fixes: 2264d9c74dda1 ("x86/intel_rdt: Build structures for each resource based on cache topology") Cc: <stable@vger.kernel.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: James Morse <james.morse@arm.com> Link: https://lore.kernel.org/r/20190624173656.202407-1-james.morse@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03dt-bindings: usb: ehci: Fix example warningsMaxime Ripard
The example of the EHCI binding generates a bunch of warnings now that the examples are validated too. Most notably, phy-names isn't used at all, and the node name should be USB. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-03dt-bindings: net: Use phy-mode instead of phy-connection-typeMaxime Ripard
When adding support for the DWMAC (and derivatives) bindings, phy-connection-type was required, even though the previous binding required the equivalent phy-mode. Let's fix this by using phy-mode as we should have. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-03dt-bindings: simple-framebuffer: Add requirement for pipelinesMaxime Ripard
Both the allwinner and amlogic compatibles require that either the allwinner,pipeline or the amlogic,pipeline property is set. This was dropped during the conversion since we didn't have conditionals back then, but we can express this properly now. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-03dt-bindings: display: Fix simple-framebuffer exampleMaxime Ripard
The simple-framebuffer binding has a compatible that isn't one of the valid options. Since an Allwinner pipeline is being described, let's add the matching compatible. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-03dt-bindings: net: mdio: Add child nodesMaxime Ripard
The child nodes of a mdio bus are supposed to be ethernet PHYs, with a reg property. Make sure that's validated as well. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-03dt-bindings: net: mdio: Add address and size cellsMaxime Ripard
MDIO controllers should have child nodes with a singe value in their reg properties being the ID of the PHY in the bus. Let's add the proper constraints on #address-cells and #size-cells. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-03dt-bindings: net: mdio: Add a nodename patternMaxime Ripard
The node name of an MDIO controller should be MDIO. Let's add a rule for this. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-03fsi: sbefifo: Don't fail operations when in SBE IPL stateEddie James
SBE fifo operations should be allowed while the SBE is in any of the "IPL" states. Operations should succeed in this state. Fixes: 9f4a8a2d7f9d fsi/sbefifo: Add driver for the SBE FIFO Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/1561575415-3282-1-git-send-email-eajames@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03coresight: tmc: Smatch: Fix potential NULL pointer dereferenceSuzuki K Poulose
Based on the following report from Smatch, fix the potential NULL pointer dereference check. The patch 743256e214e8: "coresight: tmc: Clean up device specific data" from May 22, 2019, leads to the following Smatch complaint: drivers/hwtracing/coresight/coresight-tmc-etr.c:625 tmc_etr_free_flat_buf() warn: variable dereferenced before check 'flat_buf' (see line 623) drivers/hwtracing/coresight/coresight-tmc-etr.c 622 struct etr_flat_buf *flat_buf = etr_buf->private; 623 struct device *real_dev = flat_buf->dev->parent; ^^^^^^^^^^ The patch introduces a new NULL check 624 625 if (flat_buf && flat_buf->daddr) ^^^^^^^^ but the existing code assumed it can be NULL. 626 dma_free_coherent(real_dev, flat_buf->size, 627 flat_buf->vaddr, flat_buf->daddr); Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20190621175205.24551-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03coresight: etm3x: Smatch: Fix potential NULL pointer dereferenceSuzuki K Poulose
Based on the following report from Smatch tool, make sure we have a valid drvdata before we dereference it to find the real dev. The patch 21d26b905c05: "coresight: etm: Clean up device specific data" from May 22, 2019, leads to the following Smatch complaint: ./drivers/hwtracing/coresight/coresight-etm3x.c:460 etm_get_trace_id() warn: variable dereferenced before check 'drvdata' (see line 458) ./drivers/hwtracing/coresight/coresight-etm3x.c 457 int trace_id = -1; 458 struct device *etm_dev = drvdata->csdev->dev.parent; ^^^^^^^^^ New dereference 459 460 if (!drvdata) ^^^^^^^^ Checked too late. Delete the check? 461 goto out; 462 Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20190621175205.24551-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03coresight: Potential uninitialized variable in probe()Dan Carpenter
The "drvdata->atclk" clock is optional, but if it gets set to an error pointer then we're accidentally return an uninitialized variable instead of success. Fixes: 78e6427b4e7b ("coresight: funnel: Support static funnel") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190620221237.3536-6-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03coresight: etb10: Do not call smp_processor_id from preemptibleSuzuki K Poulose
During a perf session we try to allocate buffers on the "node" associated with the CPU the event is bound to. If it is not bound to a CPU, we use the current CPU node, using smp_processor_id(). However this is unsafe in a pre-emptible context and could generate the splats as below : BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544 Use NUMA_NO_NODE hint instead of using the current node for events not bound to CPUs. Fixes: 2997aa4063d97fdb39 ("coresight: etb10: implementing AUX API") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: stable <stable@vger.kernel.org> # 4.6+ Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20190620221237.3536-5-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03coresight: tmc-etf: Do not call smp_processor_id from preemptibleSuzuki K Poulose
During a perf session we try to allocate buffers on the "node" associated with the CPU the event is bound to. If it is not bound to a CPU, we use the current CPU node, using smp_processor_id(). However this is unsafe in a pre-emptible context and could generate the splats as below : BUG: using smp_processor_id() in preemptible [00000000] code: perf/2544 caller is tmc_alloc_etf_buffer+0x5c/0x60 CPU: 2 PID: 2544 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019 Call trace: dump_backtrace+0x0/0x150 show_stack+0x14/0x20 dump_stack+0x9c/0xc4 debug_smp_processor_id+0x10c/0x110 tmc_alloc_etf_buffer+0x5c/0x60 etm_setup_aux+0x1c4/0x230 rb_alloc_aux+0x1b8/0x2b8 perf_mmap+0x35c/0x478 mmap_region+0x34c/0x4f0 do_mmap+0x2d8/0x418 vm_mmap_pgoff+0xd0/0xf8 ksys_mmap_pgoff+0x88/0xf8 __arm64_sys_mmap+0x28/0x38 el0_svc_handler+0xd8/0x138 el0_svc+0x8/0xc Use NUMA_NO_NODE hint instead of using the current node for events not bound to CPUs. Fixes: 2e499bbc1a929ac ("coresight: tmc: implementing TMC-ETF AUX space API") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: stable <stable@vger.kernel.org> # 4.7+ Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20190620221237.3536-4-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03coresight: tmc-etr: alloc_perf_buf: Do not call smp_processor_id from ↵Suzuki K Poulose
preemptible During a perf session we try to allocate buffers on the "node" associated with the CPU the event is bound to. If it is not bound to a CPU, we use the current CPU node, using smp_processor_id(). However this is unsafe in a pre-emptible context and could generate the splats as below : BUG: using smp_processor_id() in preemptible [00000000] code: perf/1743 caller is tmc_alloc_etr_buffer+0x1bc/0x1f0 CPU: 1 PID: 1743 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019 Call trace: dump_backtrace+0x0/0x150 show_stack+0x14/0x20 dump_stack+0x9c/0xc4 debug_smp_processor_id+0x10c/0x110 tmc_alloc_etr_buffer+0x1bc/0x1f0 etm_setup_aux+0x1c4/0x230 rb_alloc_aux+0x1b8/0x2b8 perf_mmap+0x35c/0x478 mmap_region+0x34c/0x4f0 do_mmap+0x2d8/0x418 vm_mmap_pgoff+0xd0/0xf8 ksys_mmap_pgoff+0x88/0xf8 __arm64_sys_mmap+0x28/0x38 el0_svc_handler+0xd8/0x138 el0_svc+0x8/0xc Use NUMA_NO_NODE hint instead of using the current node for events not bound to CPUs. Fixes: 22f429f19c4135d51e9 ("coresight: etm-perf: Add support for ETR backend") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: stable <stable@vger.kernel.org> # 4.20+ Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20190620221237.3536-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03coresight: tmc-etr: Do not call smp_processor_id() from preemptibleSuzuki K Poulose
During a perf session we try to allocate buffers on the "node" associated with the CPU the event is bound to. If it's not bound to a CPU, we use the current CPU node, using smp_processor_id(). However this is unsafe in a pre-emptible context and could generate the splats as below : BUG: using smp_processor_id() in preemptible [00000000] code: perf/1743 caller is alloc_etr_buf.isra.6+0x80/0xa0 CPU: 1 PID: 1743 Comm: perf Not tainted 5.1.0-rc6-147786-g116841e #344 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019 Call trace: dump_backtrace+0x0/0x150 show_stack+0x14/0x20 dump_stack+0x9c/0xc4 debug_smp_processor_id+0x10c/0x110 alloc_etr_buf.isra.6+0x80/0xa0 tmc_alloc_etr_buffer+0x12c/0x1f0 etm_setup_aux+0x1c4/0x230 rb_alloc_aux+0x1b8/0x2b8 perf_mmap+0x35c/0x478 mmap_region+0x34c/0x4f0 do_mmap+0x2d8/0x418 vm_mmap_pgoff+0xd0/0xf8 ksys_mmap_pgoff+0x88/0xf8 __arm64_sys_mmap+0x28/0x38 el0_svc_handler+0xd8/0x138 el0_svc+0x8/0xc Use NUMA_NO_NODE hint instead of using the current node for events not bound to CPUs. Fixes: 855ab61c16bf70b646 ("coresight: tmc-etr: Refactor function tmc_etr_setup_perf_buf()") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190620221237.3536-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03docs: misc-devices: convert files without extension to ReSTMauro Carvalho Chehab
Those files are also text files. Convert them to ReST and add to the misc-files index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Link: https://lore.kernel.org/r/b7dc829809673bd8cffe0e7bbe9c9308681c6fe2.1561756511.git.mchehab+samsung@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-07-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix the interpreter to properly handle BPF_ALU32 | BPF_ARSH on BE architectures, from Jiong. 2) Fix several bugs in the x32 BPF JIT for handling shifts by 0, from Luke and Xi. 3) Fix NULL pointer deref in btf_type_is_resolve_source_only(), from Stanislav. 4) Properly handle the check that forwarding is enabled on the device in bpf_ipv6_fib_lookup() helper code, from Anton. 5) Fix UAPI bpf_prog_info fields alignment for archs that have 16 bit alignment such as m68k, from Baruch. 6) Fix kernel hanging in unregister_netdevice loop while unregistering device bound to XDP socket, from Ilya. 7) Properly terminate tail update in xskq_produce_flush_desc(), from Nathan. 8) Fix broken always_inline handling in test_lwt_seg6local, from Jiri. 9) Fix bpftool to use correct argument in cgroup errors, from Jakub. 10) Fix detaching dummy prog in XDP redirect sample code, from Prashant. 11) Add Jonathan to AF_XDP reviewers, from Björn. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03net: hns: add support for vlan TSOYonglong Liu
The hip07 chip support vlan TSO, this patch adds NETIF_F_TSO and NETIF_F_TSO6 flags to vlan_features to improve the performance after adding vlan to the net ports. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03sctp: count data bundling sack chunk for outctrlchunksXin Long
Now all ctrl chunks are counted for asoc stats.octrlchunks and net SCTP_MIB_OUTCTRLCHUNKS either after queuing up or bundling, other than the chunk maked and bundled in sctp_packet_bundle_sack, which caused 'outctrlchunks' not consistent with 'inctrlchunks' in peer. This issue exists since very beginning, here to fix it by increasing both net SCTP_MIB_OUTCTRLCHUNKS and asoc stats.octrlchunks when sack chunk is maked and bundled in sctp_packet_bundle_sack. Reported-by: Ja Ram Jeon <jajeon@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03qlcnic: remove redundant assignment to variable errColin Ian King
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03atl1c: remove redundant assignment to variable tpd_reqColin Ian King
The variable tpd_req is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03r8152: move calling r8153b_rx_agg_chg_indicate()Hayes Wang
r8153b_rx_agg_chg_indicate() needs to be called after enabling TX/RX and before calling rxdy_gated_en(tp, false). Otherwise, the change of the settings of RX aggregation wouldn't work. Besides, adjust rtl8152_set_coalesce() for the same reason. If rx_coalesce_usecs is changed, restart TX/RX to let the setting work. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03qed: Add support for Timestamping the unicast PTP packets.Sudarsana Reddy Kalluru
This patch adds driver changes to detect/timestamp the unicast PTP packets. Changes from previous version: ------------------------------- v2: Defined a macro for unicast ptp param mask. Please consider applying this to "net-next". Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03gve: Fix u64_stats_sync to initialize startCatherine Sullivan
u64_stats_fetch_begin needs to initialize start. Signed-off-by: Catherine Sullivan <csully@google.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03net: don't warn in inet diag when IPV6 is disabledStephen Hemminger
If IPV6 was disabled, then ss command would cause a kernel warning because the command was attempting to dump IPV6 socket information. The fix is to just remove the warning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202249 Fixes: 432490f9d455 ("net: ip, diag -- Add diag interface for raw sockets") Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03loopback: fix lockdep splatMahesh Bandewar
dev_init_scheduler() and dev_activate() expect the caller to hold RTNL. Since we don't want blackhole device to be initialized per ns, we are initializing at init. [ 3.855027] Call Trace: [ 3.855034] dump_stack+0x67/0x95 [ 3.855037] lockdep_rcu_suspicious+0xd5/0x110 [ 3.855044] dev_init_scheduler+0xe3/0x120 [ 3.855048] ? net_olddevs_init+0x60/0x60 [ 3.855050] blackhole_netdev_init+0x45/0x6e [ 3.855052] do_one_initcall+0x6c/0x2fa [ 3.855058] ? rcu_read_lock_sched_held+0x8c/0xa0 [ 3.855066] kernel_init_freeable+0x1e5/0x288 [ 3.855071] ? rest_init+0x260/0x260 [ 3.855074] kernel_init+0xf/0x180 [ 3.855076] ? rest_init+0x260/0x260 [ 3.855078] ret_from_fork+0x24/0x30 Fixes: 4de83b88c66 ("loopback: create blackhole net device similar to loopack.") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03arch_topology: Remove error messages on out-of-memory conditionsGeert Uytterhoeven
There is no need to print error messages if kcalloc() or alloc_cpumask_var() fail, as the memory allocation core already takes care of that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190527122703.6303-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03net/mlx5: Expose device definitions for object eventsYishai Hadas
Expose an extra device definitions for objects events. It includes: object_type values for legacy objects and generic data header for any other object. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-07-03net/mlx5: Report EQE data upon CQ completionYishai Hadas
Report EQE data upon CQ completion to let upper layers use this data. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-07-03net/mlx5: Report a CQ error event only when a handler was setYishai Hadas
Report a CQ error event only when a handler was set. This enables mlx5_ib to not set a handler upon CQ creation and use some other mechanism to get this event as of other events by the mlx5_eq_notifier_register API. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-07-03net/mlx5: mlx5_core_create_cq() enhancementsYishai Hadas
Enhance mlx5_core_create_cq() to get the command out buffer from the callers to let them use the output. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-07-03fpga: dfl: fme: align PR buffer size per PR datawidthWu Hao
Current driver checks if input bitstream file size is aligned or not per PR data width (default 32bits). It requires one additional step for end user when they generate the bitstream file, padding extra zeros to bitstream file to align its size per PR data width, but they don't have to as hardware will drop extra padding bytes automatically. In order to simplify the user steps, this patch aligns PR buffer size per PR data width in driver, to allow user to pass unaligned size bitstream files to driver. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20190628004951.6202-4-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03fpga: dfl: fme: remove copy_to_user() in ioctl for PRWu Hao
This patch removes copy_to_user() code in partial reconfiguration ioctl, as it's useless as user never needs to read the data structure after ioctl. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20190628004951.6202-3-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03fpga: dfl-fme-mgr: fix FME_PR_INTFC_ID register address.Wu Hao
FME_PR_INTFC_ID is used as compat_id for fpga manager and region, but high 64 bits and low 64 bits of the compat_id are swapped by mistake. This patch fixes this problem by fixing register address. Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20190628004951.6202-2-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03net/mlx5: Expose the API to register for ANY eventYishai Hadas
Expose the API to register for ANY event, mlx5_ib will be able to use this functionality for its needs. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-07-03net/mlx5: Use event mask based on device capabilitiesYishai Hadas
Use the reported device capabilities for the supported user events (i.e. affiliated and un-affiliated) to set the EQ mask. As the event mask can be up to 256 defined by 4 entries of u64 change the applicable code to work accordingly. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-07-03net/mlx5: Fix mlx5_core_destroy_cq() error flowYishai Hadas
The firmware command to destroy a CQ might fail when the object is referenced by other object and the ref count is managed by the firmware. To enable a second successful destruction post the first failure need to change mlx5_eq_del_cq() to be a void function. As an error in mlx5_eq_del_cq() is quite fatal from the option to recover, a debug message inside it should be good enougth and it was changed to be void. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-07-03serial: imx: set_termios(): preserve RTS stateSergey Organov
imx_set_termios() cleared RTS on every call, now fixed. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1561558293-7683-5-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: imx: set_termios(): clarify RTS/CTS bits calculationSergey Organov
Avoid repeating the same code for rs485 twice. Make it obvious we clear CRTSCTS bit in termios->c_cflag whenever sport->have_rtscts is false. Make it obvious we clear UCR2_IRTS whenever CRTSCTS is set. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1561558293-7683-4-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: imx: set_termios(): factor-out 'ucr2' initial valueSergey Organov
Set common bits in a separate statement to make initialization explicit and not repeat the common part. Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sergey Organov <sorganov@gmail.com> Reviewed-by: Uwe Kleine-Knig <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/1561558293-7683-3-git-send-email-sorganov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: sh-sci: Terminate TX DMA during buffer flushingGeert Uytterhoeven
While the .flush_buffer() callback clears sci_port.tx_dma_len since commit 1cf4a7efdc71cab8 ("serial: sh-sci: Fix race condition causing garbage during shutdown"), it does not terminate a transmit DMA operation that may be in progress. Fix this by terminating any pending DMA operations, and resetting the corresponding cookie. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20190624123540.20629-3-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: sh-sci: Fix TX DMA buffer flushing and workqueue racesGeert Uytterhoeven
When uart_flush_buffer() is called, the .flush_buffer() callback zeroes the tx_dma_len field. This may race with the work queue function handling transmit DMA requests: 1. If the buffer is flushed before the first DMA API call, dmaengine_prep_slave_single() may be called with a zero length, causing the DMA request to never complete, leading to messages like: rcar-dmac e7300000.dma-controller: Channel Address Error happen and, with debug enabled: sh-sci e6e88000.serial: sci_dma_tx_work_fn: ffff800639b55000: 0...0, cookie 126 and DMA timeouts. 2. If the buffer is flushed after the first DMA API call, but before the second, dma_sync_single_for_device() may be called with a zero length, causing the transmit data not to be flushed to RAM, and leading to stale data being output. Fix this by: 1. Letting sci_dma_tx_work_fn() return immediately if the transmit buffer is empty, 2. Extending the critical section to cover all DMA preparational work, so tx_dma_len stays consistent for all of it, 3. Using local copies of circ_buf.head and circ_buf.tail, to make sure they match the actual operation above. Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> Suggested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20190624123540.20629-2-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: mpsc: Remove obsolete MPSC driverMark Greer
Support for the Marvell MV64x60 line of bridge chips that contained MPSC controllers has been removed and there are no other components that have that controller so remove its driver. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Link: https://lore.kernel.org/r/20190626160553.28518-1-mgreer@animalcreek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: 8250: 8250_core: Fix missing unlock on error in ↵Wei Yongjun
serial8250_register_8250_port() Add the missing unlock before return from function serial8250_register_8250_port() in the error handling case. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20190703055908.141294-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03usb :fsl: Change string format for errata propertyNikhil Badola
Remove USB errata checking code from driver. Applicability of erratum is retrieved by reading corresponding property in device tree. This property is written during device tree fixup. Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Link: https://lore.kernel.org/r/20190624072219.15258-5-yinbo.zhu@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03usb: host: Stops USB controller init if PLL fails to lockRamneek Mehresh
USB erratum-A006918 workaround tries to start internal PHY inside uboot (when PLL fails to lock). However, if the workaround also fails, then USB initialization is also stopped inside Linux. Erratum-A006918 workaround failure creates "fsl,erratum_a006918" node in device-tree. Presence of this node in device-tree is used to stop USB controller initialization in Linux Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Link: https://lore.kernel.org/r/20190624072219.15258-4-yinbo.zhu@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918Yinbo Zhu
This patch is to add member has_fsl_erratum_a006918 in platform data Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Link: https://lore.kernel.org/r/20190624072219.15258-3-yinbo.zhu@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03usb: phy: Workaround for USB erratum-A005728Suresh Gupta
PHY_CLK_VALID bit for UTMI PHY in USBDR does not set even if PHY is providing valid clock. Workaround for this involves resetting of PHY and check PHY_CLK_VALID bit multiple times. If PHY_CLK_VALID bit is still not set even after 5 retries, it would be safe to deaclare that PHY clock is not available. This erratum is applicable for USBDR less then ver 2.4. Signed-off-by: Suresh Gupta <B42813@freescale.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Link: https://lore.kernel.org/r/20190624072219.15258-2-yinbo.zhu@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03usb: fsl: Set USB_EN bit to select ULPI phyNikhil Badola
Set USB_EN bit to select ULPI phy for USB controller version 2.5 Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Link: https://lore.kernel.org/r/20190624072219.15258-1-yinbo.zhu@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-15 11:23:57 +0000