summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-16scsi: mpi3mr: Fix duplicate device entries when scanning through sysfsSreekanth Reddy
When scanning devices through the 'scan' attribute in sysfs, the user will observe duplicate device entries in lsscsi command output. Set the shost's max_channel to zero to avoid this. Link: https://lore.kernel.org/r/20211014055425.30719-1-sreekanth.reddy@broadcom.com Fixes: 824a156633df ("scsi: mpi3mr: Base driver code") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16Input: cpcap-pwrbutton - do not set input parent explicitlyDmitry Torokhov
We are using devm_input_allocate_device() that already sets parent of the input device, there is no need to do that again. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/YWpiZqrfC9+GQsM4@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-16pinctrl: amd: disable and mask interrupts on probeSachi King
Some systems such as the Microsoft Surface Laptop 4 leave interrupts enabled and configured for use in sleep states on boot, which cause unexpected behaviour such as spurious wakes and failed resumes in s2idle states. As interrupts should not be enabled until they are claimed and explicitly enabled, disabling any interrupts mistakenly left enabled by firmware should be safe. Signed-off-by: Sachi King <nakato@nakato.io> Link: https://lore.kernel.org/r/20211009033240.21543-1-nakato@nakato.io Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-16Merge tag 'perf-tools-fixes-for-v5.15-2021-10-16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix 'perf test evsel' build error on !x86 architectures - Fix libperf's test_stat_cpu mixup of CPU numbers and CPU indexes - Output offsets for decompressed records, not just useless zeros * tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: libperf tests: Fix test_stat_cpu libperf test evsel: Fix build error on !x86 architectures perf report: Output non-zero offset for decompressed records
2021-10-16Merge tag 'fixes-2021-10-16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fix from Mike Rapoport: "Fix handling of NOMAP regions with kmemleak. NOMAP regions don't have linear map entries so an attempt to scan these areas in kmemleak would fault. Prevent such faults by excluding NOMAP regions from kmemleak" * tag 'fixes-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock: exclude NOMAP regions from kmemleak
2021-10-16Merge tag 'trace-v5.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Tracing fixes for 5.15: - Fix defined but not use warning/error for osnoise function - Fix memory leak in event probe - Fix memblock leak in bootconfig - Fix the API of event probes to be like kprobes - Added test to check removal of event probe API - Fix recordmcount.pl for nds32 failed build * tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^' selftests/ftrace: Update test for more eprobe removal process tracing: Fix event probe removal from dynamic events tracing: Fix missing * in comment block bootconfig: init: Fix memblock leak in xbc_make_cmdline() tracing: Fix memory leak in eprobe_register() tracing: Fix missing osnoise tracer on max_latency
2021-10-16Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver fixes from Stephen Boyd: "Clk driver fixes for critical issues found in the past few weeks: - Select gdsc config so qcom sm6350 driver probes - Fix a register offset in qcom gcc-sm6115 so the correct clk is controlled - Fix inverted logic in Renesas RZ/G2L .is_enabled() - Mark some more clks critical in Renesas clk driver - Remove a duplicate clk in the agilex driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: add select QCOM_GDSC for SM6350 clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc clk: socfpga: agilex: fix duplicate s2f_user0_clk clk: renesas: rzg2l: Fix clk status function clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical
2021-10-16Merge tag 'for-5.15/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM verity target to skip redundant processing on I/O errors. - Fix request-based DM so that it doesn't queue request to blk-mq when DM device is suspended. - Fix DM core mempool NULL pointer race when completing IO. - Make DM clone target's 'descs' array static. * tag 'for-5.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix mempool NULL pointer race when completing IO dm rq: don't queue request to blk-mq during DM suspend dm clone: make array 'descs' static dm verity: skip redundant verity_handle_err() on I/O errors
2021-10-16Merge tag 's390-5.15-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Maintainers and reviewers changes: * Cornelia decided to free up her time and step down from vfio-ccw maintainer and s390 kvm reviewer duties * Add Alexander Gordeev as s390 arch code reviewer - Fix broken strrchr implementation * tag 's390-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: add Alexander Gordeev as reviewer s390: fix strrchr() implementation vfio-ccw: step down as maintainer KVM: s390: remove myself as reviewer
2021-10-16Merge tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linuxLinus Torvalds
Pull csky fixes from Guo Ren: "Only 5 fixups: - Make HAVE_TCM depend on !COMPILE_TEST - bitops: Remove duplicate __clear_bit define - Select ARCH_WANT_FRAME_POINTERS only if compiler supports it - Fixup regs.sr broken in ptrace - don't let sigreturn play with priveleged bits of status register" * tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linux: csky: Make HAVE_TCM depend on !COMPILE_TEST csky: bitops: Remove duplicate __clear_bit define csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports it csky: Fixup regs.sr broken in ptrace csky: don't let sigreturn play with priveleged bits of status register
2021-10-16Merge tag 'arc-5.15-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fix from Vineet Gupta: "Small fixlet for ARC" * tag 'arc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: fix potential build snafu
2021-10-16Merge tag 'arm-soc-fixes-5.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A small number fixes this time, mostly touching actual code: - Add platform device for i.MX System Reset Controller (SRC) to fix a regression caused by fw_devlink change - A fixup for a boot regression caused by my own rework for the Qualcomm SCM driver - Multiple bugfixes for the Arm FFA and optee firmware drivers, addressing problems when they are built as a loadable module - Four dts bugfixes for the Broadcom SoC used in Raspberry pi, addressing VEC (video encoder), MDIO bus controller #address-cells/#size-cells, SDIO voltage and PCIe host bridge dtc warnings" * tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx: register reset controller from a platform driver iommu/arm: fix ARM_SMMU_QCOM compilation ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting tee: optee: Fix missing devices unregister during optee_remove ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states ARM: dts: bcm2711: fix MDIO #address- and #size-cells ARM: dts: bcm283x: Fix VEC address for BCM2711 firmware: arm_ffa: Fix __ffa_devices_unregister firmware: arm_ffa: Add missing remove callback to ffa_bus_type
2021-10-16Merge tag 'pci-v5.15-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: - Don't save msi_populate_sysfs() error code as dev->msi_irq_groups so we don't dereference the error code as a pointer (Wang Hai) * tag 'pci-v5.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/MSI: Handle msi_populate_sysfs() errors correctly
2021-10-16Merge tag 'acpi-5.15-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Add a missing device ID to a quirk list in the suspend-to-idle support code" * tag 'acpi-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Include alternate AMDI0005 id in special behaviour
2021-10-16net: bridge: mcast: use multicast_membership_interval for IGMPv3Nikolay Aleksandrov
When I added IGMPv3 support I decided to follow the RFC for computing the GMI dynamically: " 8.4. Group Membership Interval The Group Membership Interval is the amount of time that must pass before a multicast router decides there are no more members of a group or a particular source on a network. This value MUST be ((the Robustness Variable) times (the Query Interval)) plus (one Query Response Interval)." But that actually is inconsistent with how the bridge used to compute it for IGMPv2, where it was user-configurable that has a correct default value but it is up to user-space to maintain it. This would make it consistent with the other timer values which are also maintained correct by the user instead of being dynamically computed. It also changes back to the previous user-expected GMI behaviour for IGMPv3 queries which were supported before IGMPv3 was added. Note that to properly compute it dynamically we would need to add support for "Robustness Variable" which is currently missing. Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: 0436862e417e ("net: bridge: mcast: support for IGMPv3/MLDv2 ALLOW_NEW_SOURCES report") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16x86/fpu: Mask out the invalid MXCSR bits properlyBorislav Petkov
This is a fix for the fix (yeah, /facepalm). The correct mask to use is not the negation of the MXCSR_MASK but the actual mask which contains the supported bits in the MXCSR register. Reported and debugged by Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: d298b03506d3 ("x86/fpu: Restore the masking out of reserved MXCSR bits") Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ser Olmy <ser.olmy@protonmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/YWgYIYXLriayyezv@intel.com
2021-10-16arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHYFrieder Schrempf
Previously we falsely relied on the PHY driver to unconditionally enable the internal RX delay. Since the following fix for the PHY driver this is not the case anymore: commit 7b005a1742be ("net: phy: mscc: configure both RX and TX internal delays for RGMII") In order to enable the delay we need to set the connection type to "rgmii-rxid". Without the RX delay the ethernet is not functional at all. Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-16arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequencyFrieder Schrempf
The MCP2515 can be used with an SPI clock of up to 10 MHz. Set the limit accordingly to prevent any performance issues caused by the really low clock speed of 100 kHz. This removes the arbitrarily low limit on the SPI frequency, that was caused by a typo in the original dts. Without this change, receiving CAN messages on the board beyond a certain bitrate will cause overrun errors (see 'ip -det -stat link show can0'). With this fix, receiving messages on the bus works without any overrun errors for bitrates up to 1 MBit. Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-16arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2Frieder Schrempf
The regulator reg_rst_eth2 should keep the reset signal of the USB ethernet adapter deasserted anytime. Fix the polarity and mark it as always-on. Anyway, using the regulator is only a workaround for the missing support of specifying a reset GPIO for USB devices in a generic way. As we don't have a solution for this at the moment, at least fix the current workaround. Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-16arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mVFrieder Schrempf
According to the datasheet the typical value for VDD_SNVS should be 800 mV, so let's make sure that this is within the range of the regulator. Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-16arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correctFrieder Schrempf
It looks like the voltages for the SOC and DRAM supply weren't properly validated before. The datasheet and uboot-imx code tells us that VDD_SOC should be 800 mV in suspend and 850 mV in run mode. VDD_DRAM should be 950 mV for DDR clock frequencies of up to 1.5 GHz. Let's fix these values to make sure the voltages are within the required range. Fixes: 8668d8b2e67f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable@vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-10-15Input: touchscreen - avoid bitwise vs logical OR warningNathan Chancellor
A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: xpad - add support for another USB ID of Nacon GC-100Michael Cullen
The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: resistive-adc-touch - fix division by zero error on z1 == 0Oleksij Rempel
For proper pressure calculation we need at least x and z1 to be non zero. Even worse, in case z1 we may run in to division by zero error. Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: snvs_pwrkey - add clk handlingUwe Kleine-König
On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an associated clock. Accessing the registers requires that this clock is enabled. Binding the driver on at least i.MX7S and i.MX8MP while not having the clock enabled results in a complete hang of the machine. (This usually only happens if snvs_pwrkey is built as a module and the rtc-snvs driver isn't already bound because at bootup the required clk is on and only gets disabled when the clk framework disables unused clks late during boot.) This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add snvs clock to pwrkey"). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: max8925_onkey - don't mark comment as kernel-docRandy Dunlap
Change the comment to a normal (non-kernel-doc) comment to avoid these kernel-doc warnings: max8925_onkey.c:2: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * MAX8925 ONKEY driver max8925_onkey.c:2: warning: missing initial short description on line: * MAX8925 ONKEY driver Fixes: 3734574cac100 ("Input: enable onkey driver of max8925") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20211002045943.9406-1-rdunlap@infradead.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ads7846 - do not attempt IRQ workaround when deferring probeDmitry Torokhov
When request_irq() returns -EPORBE_DEFER we should abort probe and try again later instead of trying to engage IRQ trigger workaround. Link: https://lore.kernel.org/r/20210910045039.4020199-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ads7846 - use input_set_capability()Dmitry Torokhov
Instead of manipulating capability bits directly use input_set_capability(). Also stop setting EV_ABS explicitly as input_set_abs_params() does it for us. Link: https://lore.kernel.org/r/20210910045039.4020199-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ads7846 - set input device bus type and product IDDmitry Torokhov
Set input device's bus type as BUS_SPI and use model as product ID. Link: https://lore.kernel.org/r/20210910045039.4020199-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: tm2-touchkey - allow changing keycodes from userspaceStephan Gerhold
At the moment the touch keys have key codes assigned from the device tree. In some cases, users might want to change the key code from userspace. There is existing functionality for this in the input core using the EVIOCSKEYCODE ioctl, which is integrated for example into udev. Make it possible to use this functionality for tm2-touchkey by simply making the input core aware of the array that holds the keycodes. Similar code also exists in mcs_touchkey and mpr121_touchkey. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20211013112305.41574-2-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: tm2-touchkey - report scan codesStephan Gerhold
Report the index of pressed touch key as MSC_SCAN code to userspace so it is possible to identify which of the keys was pressed (not just the function that is currently assigned to the key). This is done similarly also in mcs_touchkey and mpr121_touchkey. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20211013112305.41574-1-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15kyber: avoid q->disk dereferences in trace pointsChristoph Hellwig
q->disk becomes invalid after the gendisk is removed. Work around this by caching the dev_t for the tracepoints. The real fix would be to properly tear down the I/O schedulers with the gendisk, but that is a much more invasive change. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211012093301.GA27795@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-15block: keep q_usage_counter in atomic mode after del_gendiskChristoph Hellwig
Don't switch back to percpu mode to avoid the double RCU grace period when tearing down SCSI devices. After removing the disk only passthrough commands can be send anyway. Suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-6-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-15block: drain file system I/O on del_gendiskChristoph Hellwig
Instead of delaying draining of file system I/O related items like the blk-qos queues, the integrity read workqueue and timeouts only when the request_queue is removed, do that when del_gendisk is called. This is important for SCSI where the upper level drivers that control the gendisk are separate entities, and the disk can be freed much earlier than the request_queue, or can even be unbound without tearing down the queue. Fixes: edb0872f44ec ("block: move the bdi from the request_queue to the gendisk") Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-5-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-15block: split bio_queue_enter from blk_queue_enterChristoph Hellwig
To prepare for fixing a gendisk shutdown race, open code the blk_queue_enter logic in bio_queue_enter. This also removes the pointless flags translation. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-4-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-15block: factor out a blk_try_enter_queue helperChristoph Hellwig
Factor out the code to try to get q_usage_counter without blocking into a separate helper. Both to improve code readability and to prepare for splitting bio_queue_enter from blk_queue_enter. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-3-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-15block: call submit_bio_checks under q_usage_counterChristoph Hellwig
Ensure all bios check the current values of the queue under freeze protection, i.e. to make sure the zero capacity set by del_gendisk is actually seen before dispatching to the driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210929071241.934472-2-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-15nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'Steven Rostedt
I received a build failure for a new patch I'm working on the nds32 architecture, and when I went to test it, I couldn't get to my build error, because it failed to build with a bunch of: Error: invalid operands (*UND* and *UND* sections) for `^' issues with various files. Those files were temporary asm files that looked like: kernel/.tmp_mc_fork.s I decided to look deeper, and found that the "mc" portion of that name stood for "mcount", and was created by the recordmcount.pl script. One that I wrote over a decade ago. Once I knew the source of the problem, I was able to investigate it further. The way the recordmcount.pl script works (BTW, there's a C version that simply modifies the ELF object) is by doing an "objdump" on the object file. Looks for all the calls to "mcount", and creates an offset of those locations from some global variable it can use (usually a global function name, found with <.*>:). Creates a asm file that is a table of references to these locations, using the found variable/function. Compiles it and links it back into the original object file. This asm file is called ".tmp_mc_<object_base_name>.s". The problem here is that the objdump produced by the nds32 object file, contains things that look like: 0000159a <.L3^B1>: 159a: c6 00 beqz38 $r6, 159a <.L3^B1> 159a: R_NDS32_9_PCREL_RELA .text+0x159e 159c: 84 d2 movi55 $r6, #-14 159e: 80 06 mov55 $r0, $r6 15a0: ec 3c addi10.sp #0x3c Where ".L3^B1 is somehow selected as the "global" variable to index off of. Then the assembly file that holds the mcount locations looks like this: .section __mcount_loc,"a",@progbits .align 2 .long .L3^B1 + -5522 .long .L3^B1 + -5384 .long .L3^B1 + -5270 .long .L3^B1 + -5098 .long .L3^B1 + -4970 .long .L3^B1 + -4758 .long .L3^B1 + -4122 [...] And when it is compiled back to an object to link to the original object, the compile fails on the "^" symbol. Simple solution for now, is to have the perl script ignore using function symbols that have an "^" in the name. Link: https://lkml.kernel.org/r/20211014143507.4ad2c0f7@gandalf.local.home Cc: stable@vger.kernel.org Acked-by: Greentime Hu <green.hu@gmail.com> Fixes: fbf58a52ac088 ("nds32/ftrace: Add RECORD_MCOUNT support") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-15Input: adxl34x - fix sparse warningDmitry Torokhov
This fixes the following warning from sparse: CC [M] drivers/input/misc/adxl34x.o CHECK drivers/input/misc/adxl34x.c drivers/input/misc/adxl34x.c:245:29: warning: cast to restricted __le16 drivers/input/misc/adxl34x.c:248:29: warning: cast to restricted __le16 drivers/input/misc/adxl34x.c:251:29: warning: cast to restricted __le16 Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/YWZIjb91d6aAwgss@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ep93xx_keypad - switch to using managed resourcesDmitry Torokhov
By using managed resources (devm) we are able to streamline error handling in probe and remove most of the custom remove method. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/YWZGKWgdarGtvtYA@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ep93xx_keypad - use dev_pm_set_wake_irq()Dmitry Torokhov
Instead of manually toggling interrupt as wakeup source in suspend/resume methods, let's declare keypad interrupt and wakeup interrupt and leave the rest to the PM core. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20211012013735.3523140-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ep93xx_keypad - use BIT() and GENMASK() macrosDmitry Torokhov
Also drop parenthesis around macros that do not use expressions as they are not needed. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20211012013735.3523140-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15Input: ep93xx_keypad - annotate suspend/resume as __maybe_unusedDmitry Torokhov
Instead of guarding suspend/resume methods with #ifdef CONFIG_PM let's mark them as __maybe_unused as this allows better compile coverage. Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20211012013735.3523140-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-10-15ARC: fix potential build snafuVineet Gupta
In the big pgtable header split, I inadvertently introduced a couple of duplicate symbols. Fixes: fe6cb7b043b69cd9 ("ARC: mm: disintegrate pgtable.h into levels and flags") Signed-off-by: Vineet Gupta <vgupta@kernel.org>
2021-10-15vsock_diag_test: remove free_sock_stat() call in test_no_socketsStefano Garzarella
In `test_no_sockets` we don't expect any sockets, indeed check_no_sockets() prints an error and exits if `sockets` list is not empty, so free_sock_stat() call is unnecessary since it would only be called when the `sockets` list is empty. This was discovered by a strange warning printed by gcc v11.2.1: In file included from ../../include/linux/list.h:7, from vsock_diag_test.c:18: vsock_diag_test.c: In function ‘test_no_sockets’: ../../include/linux/kernel.h:35:45: error: array subscript ‘struct vsock_stat[0]’ is partly outside array bound s of ‘struct list_head[1]’ [-Werror=array-bounds] 35 | const typeof(((type *)0)->member) * __mptr = (ptr); \ | ^~~~~~ ../../include/linux/list.h:352:9: note: in expansion of macro ‘container_of’ 352 | container_of(ptr, type, member) | ^~~~~~~~~~~~ ../../include/linux/list.h:393:9: note: in expansion of macro ‘list_entry’ 393 | list_entry((pos)->member.next, typeof(*(pos)), member) | ^~~~~~~~~~ ../../include/linux/list.h:522:21: note: in expansion of macro ‘list_next_entry’ 522 | n = list_next_entry(pos, member); \ | ^~~~~~~~~~~~~~~ vsock_diag_test.c:325:9: note: in expansion of macro ‘list_for_each_entry_safe’ 325 | list_for_each_entry_safe(st, next, sockets, list) { | ^~~~~~~~~~~~~~~~~~~~~~~~ In file included from vsock_diag_test.c:18: vsock_diag_test.c:333:19: note: while referencing ‘sockets’ 333 | LIST_HEAD(sockets); | ^~~~~~~ ../../include/linux/list.h:23:26: note: in definition of macro ‘LIST_HEAD’ 23 | struct list_head name = LIST_HEAD_INIT(name) It seems related to some compiler optimization and assumption about the empty `sockets` list, since this warning is printed only with -02 or -O3. Also removing `exit(1)` from check_no_sockets() makes the warning disappear since in that case free_sock_stat() can be reached also when the list is not empty. Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211014152045.173872-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-15Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-14 Brett ensures RDMA nodes are removed during release and rebuild. He also corrects fw.mgmt.api to include the patch number for proper identification. Dave stops ida_free() being called when an IDA has not been allocated. Michal corrects the order of parameters being provided and the number of entries skipped for UDP tunnels. ==================== Link: https://lore.kernel.org/r/20211014181953.3538330-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-16csky: Make HAVE_TCM depend on !COMPILE_TESTGuenter Roeck
Building csky:allmodconfig results in the following build errors. arch/csky/mm/tcm.c:9:2: error: #error "You should define ITCM_RAM_BASE" 9 | #error "You should define ITCM_RAM_BASE" | ^~~~~ arch/csky/mm/tcm.c:14:2: error: #error "You should define DTCM_RAM_BASE" 14 | #error "You should define DTCM_RAM_BASE" | ^~~~~ arch/csky/mm/tcm.c:18:2: error: #error "You should define correct DTCM_RAM_BASE" 18 | #error "You should define correct DTCM_RAM_BASE" This is seen with compile tests since those enable HAVE_TCM, but do not provide useful default values for ITCM_RAM_BASE or DTCM_RAM_BASE. Disable HAVE_TCM for commpile tests to avoid the error. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guo Ren <guoren@kernel.org>
2021-10-16csky: bitops: Remove duplicate __clear_bit defineGuenter Roeck
Building csky:allmodconfig results in the following build error. In file included from ./include/linux/bitops.h:33, from ./include/linux/log2.h:12, from kernel/bounds.c:13: ./arch/csky/include/asm/bitops.h:77: error: "__clear_bit" redefined Since commit 9248e52fec95 ("locking/atomic: simplify non-atomic wrappers"), __clear_bit is defined in include/asm-generic/bitops/non-atomic.h, and the define in the csky include file is no longer necessary or useful. Remove it. Fixes: 9248e52fec95 ("locking/atomic: simplify non-atomic wrappers") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guo Ren <guoren@kernel.org>
2021-10-16csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports itGuenter Roeck
Compiling csky:allmodconfig with an upstream C compiler results in the following error. csky-linux-gcc: error: unrecognized command-line option '-mbacktrace'; did you mean '-fbacktrace'? Select ARCH_WANT_FRAME_POINTERS only if gcc supports it to avoid the error. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guo Ren <guoren@kernel.org>
2021-10-16csky: Fixup regs.sr broken in ptraceGuo Ren
gpr_get() return the entire pt_regs (include sr) to userspace, if we don't restore the C bit in gpr_set, it may break the ALU result in that context. So the C flag bit is part of gpr context, that's why riscv totally remove the C bit in the ISA. That makes sr reg clear from userspace to supervisor privilege. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org
generated by cgit (git 2.34.1) at 2025-09-14 08:33:15 +0000